%% Copyright (c) 2015-2017, Loïc Hoguin <[email protected]>
%%
%% Permission to use, copy, modify, and/or distribute this software for any
%% purpose with or without fee is hereby granted, provided that the above
%% copyright notice and this permission notice appear in all copies.
%%
%% THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
%% WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
%% MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
%% ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
%% WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
%% ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
%% OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-module(cowboy_http2).
-export([init/5]).
-export([init/7]).
-export([init/9]).
-export([system_continue/3]).
-export([system_terminate/4]).
-export([system_code_change/4]).
-record(stream, {
id = undefined :: cowboy_stream:streamid(),
%% Stream handlers and their state.
state = undefined :: {module(), any()},
%% Whether we finished sending data.
local = idle :: idle | cowboy_stream:fin(),
%% Whether we finished receiving data.
remote = nofin :: cowboy_stream:fin(),
%% Request body length.
body_length = 0 :: non_neg_integer()
}).
-type stream() :: #stream{}.
-record(state, {
parent = undefined :: pid(),
ref :: ranch:ref(),
socket = undefined :: inet:socket(),
transport :: module(),
opts = #{} :: map(),
%% Remote address and port for the connection.
peer = undefined :: {inet:ip_address(), inet:port_number()},
%% Settings are separate for each endpoint. In addition, settings
%% must be acknowledged before they can be expected to be applied.
%%
%% @todo Since the ack is required, we must timeout if we don't receive it.
%% @todo I haven't put as much thought as I should have on this,
%% the final settings handling will be very different.
local_settings = #{
% header_table_size => 4096,
% enable_push => false, %% We are the server. Push is never enabled.
% max_concurrent_streams => infinity,
% initial_window_size => 65535,
max_frame_size => 16384
% max_header_list_size => infinity
} :: map(),
%% @todo We need a TimerRef to do SETTINGS_TIMEOUT errors.
%% We need to be careful there. It's well possible that we send
%% two SETTINGS frames before we receive a SETTINGS ack.
next_settings = #{} :: undefined | map(), %% @todo perhaps set to undefined by default
remote_settings = #{} :: map(),
%% Stream identifiers.
client_streamid = 0 :: non_neg_integer(),
server_streamid = 2 :: pos_integer(),
%% Currently active HTTP/2 streams. Streams may be initiated either
%% by the client or by the server through PUSH_PROMISE frames.
streams = [] :: [stream()],
%% Streams can spawn zero or more children which are then managed
%% by this module if operating as a supervisor.
children = [] :: [{pid(), cowboy_stream:streamid()}],
%% The client starts by sending a sequence of bytes as a preface,
%% followed by a potentially empty SETTINGS frame. Then the connection
%% is established and continues normally. An exception is when a HEADERS
%% frame is sent followed by CONTINUATION frames: no other frame can be
%% sent in between.
parse_state = undefined :: {preface, sequence, reference()}
| {preface, settings, reference()}
| normal
| {continuation, cowboy_stream:streamid(), cowboy_stream:fin(), binary()},
%% HPACK decoding and encoding state.
decode_state = cow_hpack:init() :: cow_hpack:state(),
encode_state = cow_hpack:init() :: cow_hpack:state()
}).
-spec init(pid(), ranch:ref(), inet:socket(), module(), cowboy:opts()) -> ok.
init(Parent, Ref, Socket, Transport, Opts) ->
case Transport:peername(Socket) of
{ok, Peer} ->
init(Parent, Ref, Socket, Transport, Opts, Peer, <<>>);
{error, Reason} ->
%% Couldn't read the peer address; connection is gone.
terminate(undefined, {socket_error, Reason, 'An error has occurred on the socket.'})
end.
-spec init(pid(), ranch:ref(), inet:socket(), module(), cowboy:opts(),
{inet:ip_address(), inet:port_number()}, binary()) -> ok.
init(Parent, Ref, Socket, Transport, Opts, Peer, Buffer) ->
State = #state{parent=Parent, ref=Ref, socket=Socket,
transport=Transport, opts=Opts, peer=Peer,
parse_state={preface, sequence, preface_timeout(Opts)}},
preface(State),
case Buffer of
<<>> -> before_loop(State, Buffer);
_ -> parse(State, Buffer)
end.
%% @todo Add an argument for the request body.
-spec init(pid(), ranch:ref(), inet:socket(), module(), cowboy:opts(),
{inet:ip_address(), inet:port_number()}, binary(), map() | undefined, cowboy_req:req()) -> ok.
init(Parent, Ref, Socket, Transport, Opts, Peer, Buffer, _Settings, Req) ->
State0 = #state{parent=Parent, ref=Ref, socket=Socket,
transport=Transport, opts=Opts, peer=Peer,
parse_state={preface, sequence, preface_timeout(Opts)}},
preface(State0),
%% @todo Apply settings.
%% StreamID from HTTP/1.1 Upgrade requests is always 1.
%% The stream is always in the half-closed (remote) state.
State = stream_handler_init(State0, 1, fin, Req),
case Buffer of
<<>> -> before_loop(State, Buffer);
_ -> parse(State, Buffer)
end.
preface(#state{socket=Socket, transport=Transport, next_settings=Settings}) ->
%% We send next_settings and use defaults until we get a ack.
ok = Transport:send(Socket, cow_http2:settings(Settings)).
preface_timeout(Opts) ->
PrefaceTimeout = maps:get(preface_timeout, Opts, 5000),
erlang:start_timer(PrefaceTimeout, self(), preface_timeout).
%% @todo Add the timeout for last time since we heard of connection.
before_loop(State, Buffer) ->
loop(State, Buffer).
loop(State=#state{parent=Parent, socket=Socket, transport=Transport,
children=Children, parse_state=PS}, Buffer) ->
Transport:setopts(Socket, [{active, once}]),
{OK, Closed, Error} = Transport:messages(),
receive
%% Socket messages.
{OK, Socket, Data} ->
parse(State, << Buffer/binary, Data/binary >>);
{Closed, Socket} ->
terminate(State, {socket_error, closed, 'The socket has been closed.'});
{Error, Socket, Reason} ->
terminate(State, {socket_error, Reason, 'An error has occurred on the socket.'});
%% System messages.
{'EXIT', Parent, Reason} ->
exit(Reason);
{system, From, Request} ->
sys:handle_system_msg(Request, From, Parent, ?MODULE, [], {State, Buffer});
{timeout, TRef, preface_timeout} ->
case PS of
{preface, _, TRef} ->
terminate(State, {connection_error, protocol_error,
'The preface was not received in a reasonable amount of time.'});
_ ->
loop(State, Buffer)
end;
%% Messages pertaining to a stream.
{{Pid, StreamID}, Msg} when Pid =:= self() ->
loop(info(State, StreamID, Msg), Buffer);
%% Exit signal from children.
Msg = {'EXIT', Pid, _} ->
loop(down(State, Pid, Msg), Buffer);
%% Calls from supervisor module.
{'$gen_call', {From, Tag}, which_children} ->
Workers = [{?MODULE, Pid, worker, [?MODULE]} || {Pid, _} <- Children],
From ! {Tag, Workers},
loop(State, Buffer);
{'$gen_call', {From, Tag}, count_children} ->
NbChildren = length(Children),
Counts = [{specs, 1}, {active, NbChildren},
{supervisors, 0}, {workers, NbChildren}],
From ! {Tag, Counts},
loop(State, Buffer);
{'$gen_call', {From, Tag}, _} ->
From ! {Tag, {error, ?MODULE}},
loop(State, Buffer);
Msg ->
error_logger:error_msg("Received stray message ~p.", [Msg]),
loop(State, Buffer)
%% @todo Configurable timeout.
after 60000 ->
terminate(State, {internal_error, timeout, 'No message or data received before timeout.'})
end.
parse(State=#state{socket=Socket, transport=Transport, parse_state={preface, sequence, TRef}}, Data) ->
case Data of
<< "PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n", Rest/bits >> ->
parse(State#state{parse_state={preface, settings, TRef}}, Rest);
_ when byte_size(Data) >= 24 ->
Transport:close(Socket),
exit({shutdown, {connection_error, protocol_error,
'The connection preface was invalid. (RFC7540 3.5)'}});
_ ->
Len = byte_size(Data),
<< Preface:Len/binary, _/bits >> = <<"PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n">>,
case Data of
Preface ->
%% @todo OK we should have a timeout when waiting for the preface.
before_loop(State, Data);
_ ->
Transport:close(Socket),
exit({shutdown, {connection_error, protocol_error,
'The connection preface was invalid. (RFC7540 3.5)'}})
end
end;
%% @todo Perhaps instead of just more we can have {more, Len} to avoid all the checks.
parse(State=#state{local_settings=#{max_frame_size := MaxFrameSize},
parse_state=ParseState}, Data) ->
case cow_http2:parse(Data, MaxFrameSize) of
{ok, Frame, Rest} ->
case ParseState of
normal ->
parse(frame(State, Frame), Rest);
{preface, settings, TRef} ->
parse_settings_preface(State, Frame, Rest, TRef);
{continuation, _, _, _} ->
parse(continuation_frame(State, Frame), Rest)
end;
{ignore, Rest} ->
parse(State, Rest);
{stream_error, StreamID, Reason, Human, Rest} ->
parse(stream_reset(State, StreamID, {stream_error, Reason, Human}), Rest);
Error = {connection_error, _, _} ->
terminate(State, Error);
more ->
before_loop(State, Data)
end.
parse_settings_preface(State, Frame={settings, _}, Rest, TRef) ->
_ = erlang:cancel_timer(TRef, [{async, true}, {info, false}]),
parse(frame(State#state{parse_state=normal}, Frame), Rest);
parse_settings_preface(State, _, _, _) ->
terminate(State, {connection_error, protocol_error,
'The preface sequence must be followed by a SETTINGS frame. (RFC7540 3.5)'}).
%% @todo When we get a 'fin' we need to check if the stream had a 'fin' sent back
%% and terminate the stream if this is the end of it.
%% DATA frame.
frame(State=#state{streams=Streams}, {data, StreamID, IsFin0, Data}) ->
case lists:keyfind(StreamID, #stream.id, Streams) of
Stream = #stream{state=StreamState0, remote=nofin, body_length=Len0} ->
Len = Len0 + byte_size(Data),
IsFin = case IsFin0 of
fin -> {fin, Len};
nofin -> nofin
end,
try cowboy_stream:data(StreamID, IsFin, Data, StreamState0) of
{Commands, StreamState} ->
commands(State, Stream#stream{state=StreamState, body_length=Len}, Commands)
catch Class:Reason ->
error_logger:error_msg("Exception occurred in "
"cowboy_stream:data(~p, ~p, ~p, ~p) with reason ~p:~p.",
[StreamID, IsFin0, Data, StreamState0, Class, Reason]),
stream_reset(State, StreamID, {internal_error, {Class, Reason},
'Exception occurred in cowboy_stream:data/4.'})
end;
_ ->
stream_reset(State, StreamID, {stream_error, stream_closed,
'DATA frame received for a closed or non-existent stream. (RFC7540 6.1)'})
end;
%% Single HEADERS frame headers block.
frame(State, {headers, StreamID, IsFin, head_fin, HeaderBlock}) ->
%% @todo We probably need to validate StreamID here and in 4 next clauses.
stream_init(State, StreamID, IsFin, HeaderBlock);
%% HEADERS frame starting a headers block. Enter continuation mode.
frame(State, {headers, StreamID, IsFin, head_nofin, HeaderBlockFragment}) ->
State#state{parse_state={continuation, StreamID, IsFin, HeaderBlockFragment}};
%% Single HEADERS frame headers block with priority.
frame(State, {headers, StreamID, IsFin, head_fin,
_IsExclusive, _DepStreamID, _Weight, HeaderBlock}) ->
%% @todo Handle priority.
stream_init(State, StreamID, IsFin, HeaderBlock);
%% HEADERS frame starting a headers block. Enter continuation mode.
frame(State, {headers, StreamID, IsFin, head_nofin,
_IsExclusive, _DepStreamID, _Weight, HeaderBlockFragment}) ->
%% @todo Handle priority.
State#state{parse_state={continuation, StreamID, IsFin, HeaderBlockFragment}};
%% PRIORITY frame.
frame(State, {priority, _StreamID, _IsExclusive, _DepStreamID, _Weight}) ->
%% @todo Validate StreamID?
%% @todo Handle priority.
State;
%% RST_STREAM frame.
frame(State, {rst_stream, StreamID, Reason}) ->
stream_terminate(State, StreamID, {stream_error, Reason, 'Stream reset requested by client.'});
%% SETTINGS frame.
frame(State=#state{socket=Socket, transport=Transport}, {settings, _Settings}) ->
%% @todo Apply SETTINGS.
Transport:send(Socket, cow_http2:settings_ack()),
State;
%% Ack for a previously sent SETTINGS frame.
frame(State=#state{next_settings=_NextSettings}, settings_ack) ->
%% @todo Apply SETTINGS that require synchronization.
State;
%% Unexpected PUSH_PROMISE frame.
frame(State, {push_promise, _, _, _, _}) ->
terminate(State, {connection_error, protocol_error,
'PUSH_PROMISE frames MUST only be sent on a peer-initiated stream. (RFC7540 6.6)'});
%% PING frame.
frame(State=#state{socket=Socket, transport=Transport}, {ping, Opaque}) ->
Transport:send(Socket, cow_http2:ping_ack(Opaque)),
State;
%% Ack for a previously sent PING frame.
%%
%% @todo Might want to check contents but probably a waste of time.
frame(State, {ping_ack, _Opaque}) ->
State;
%% GOAWAY frame.
frame(State, Frame={goaway, _, _, _}) ->
terminate(State, {stop, Frame, 'Client is going away.'});
%% Connection-wide WINDOW_UPDATE frame.
frame(State, {window_update, _Increment}) ->
%% @todo control flow
State;
%% Stream-specific WINDOW_UPDATE frame.
frame(State, {window_update, _StreamID, _Increment}) ->
%% @todo stream-specific control flow
State;
%% Unexpected CONTINUATION frame.
frame(State, {continuation, _, _, _}) ->
terminate(State, {connection_error, protocol_error,
'CONTINUATION frames MUST be preceded by a HEADERS frame. (RFC7540 6.10)'}).
continuation_frame(State=#state{parse_state={continuation, StreamID, IsFin, HeaderBlockFragment0}},
{continuation, StreamID, head_fin, HeaderBlockFragment1}) ->
stream_init(State#state{parse_state=normal}, StreamID, IsFin,
<< HeaderBlockFragment0/binary, HeaderBlockFragment1/binary >>);
continuation_frame(State=#state{parse_state={continuation, StreamID, IsFin, HeaderBlockFragment0}},
{continuation, StreamID, head_nofin, HeaderBlockFragment1}) ->
State#state{parse_state={continuation, StreamID, IsFin,
<< HeaderBlockFragment0/binary, HeaderBlockFragment1/binary >>}};
continuation_frame(State, _) ->
terminate(State, {connection_error, protocol_error,
'An invalid frame was received while expecting a CONTINUATION frame. (RFC7540 6.2)'}).
down(State=#state{children=Children0}, Pid, Msg) ->
case lists:keytake(Pid, 1, Children0) of
{value, {_, StreamID}, Children} ->
info(State#state{children=Children}, StreamID, Msg);
false ->
error_logger:error_msg("Received EXIT signal ~p for unknown process ~p.", [Msg, Pid]),
State
end.
info(State=#state{streams=Streams}, StreamID, Msg) ->
case lists:keyfind(StreamID, #stream.id, Streams) of
Stream = #stream{state=StreamState0} ->
try cowboy_stream:info(StreamID, Msg, StreamState0) of
{Commands, StreamState} ->
commands(State, Stream#stream{state=StreamState}, Commands)
catch Class:Reason ->
error_logger:error_msg("Exception occurred in "
"cowboy_stream:info(~p, ~p, ~p) with reason ~p:~p.",
[StreamID, Msg, StreamState0, Class, Reason]),
stream_reset(State, StreamID, {internal_error, {Class, Reason},
'Exception occurred in cowboy_stream:info/3.'})
end;
false ->
error_logger:error_msg("Received message ~p for unknown stream ~p.", [Msg, StreamID]),
State
end.
commands(State, Stream, []) ->
after_commands(State, Stream);
%% Error responses are sent only if a response wasn't sent already.
commands(State, Stream=#stream{local=idle}, [{error_response, StatusCode, Headers, Body}|Tail]) ->
commands(State, Stream, [{response, StatusCode, Headers, Body}|Tail]);
commands(State, Stream, [{error_response, _, _, _}|Tail]) ->
commands(State, Stream, Tail);
%% Send response headers.
%%
%% @todo Kill the stream if it sent a response when one has already been sent.
%% @todo Keep IsFin in the state.
%% @todo Same two things above apply to DATA, possibly promise too.
commands(State=#state{socket=Socket, transport=Transport, encode_state=EncodeState0},
Stream=#stream{id=StreamID, local=idle}, [{response, StatusCode, Headers0, Body}|Tail]) ->
Headers = Headers0#{<<":status">> => status(StatusCode)},
{HeaderBlock, EncodeState} = headers_encode(Headers, EncodeState0),
case Body of
<<>> ->
Transport:send(Socket, cow_http2:headers(StreamID, fin, HeaderBlock)),
commands(State#state{encode_state=EncodeState}, Stream#stream{local=fin}, Tail);
{sendfile, O, B, P} ->
Transport:send(Socket, cow_http2:headers(StreamID, nofin, HeaderBlock)),
commands(State#state{encode_state=EncodeState}, Stream#stream{local=nofin},
[{sendfile, fin, O, B, P}|Tail]);
_ ->
Transport:send(Socket, cow_http2:headers(StreamID, nofin, HeaderBlock)),
%% @todo 16384 is the default SETTINGS_MAX_FRAME_SIZE.
%% Use the length set by the server instead, if any.
%% @todo Would be better if we didn't have to convert to binary.
send_data(Socket, Transport, StreamID, fin, iolist_to_binary(Body), 16384),
commands(State#state{encode_state=EncodeState}, Stream#stream{local=fin}, Tail)
end;
%% @todo response when local!=idle
%% Send response headers and initiate chunked encoding.
commands(State=#state{socket=Socket, transport=Transport, encode_state=EncodeState0},
Stream=#stream{id=StreamID, local=idle}, [{headers, StatusCode, Headers0}|Tail]) ->
Headers = Headers0#{<<":status">> => status(StatusCode)},
{HeaderBlock, EncodeState} = headers_encode(Headers, EncodeState0),
Transport:send(Socket, cow_http2:headers(StreamID, nofin, HeaderBlock)),
commands(State#state{encode_state=EncodeState}, Stream#stream{local=nofin}, Tail);
%% @todo headers when local!=idle
%% Send a response body chunk.
%%
%% @todo WINDOW_UPDATE stuff require us to buffer some data.
%%
%% When the body is sent using sendfile, the current solution is not
%% very good. The body could be too large, blocking the connection.
%% Also sendfile technically only works over TCP, so it's not that
%% useful for HTTP/2. At the very least the sendfile call should be
%% split into multiple calls and flow control should be used to make
%% sure we only send as fast as the client can receive and don't block
%% anything.
commands(State=#state{socket=Socket, transport=Transport}, Stream=#stream{id=StreamID, local=nofin},
[{data, IsFin, Data}|Tail]) ->
Transport:send(Socket, cow_http2:data(StreamID, IsFin, Data)),
commands(State, Stream#stream{local=IsFin}, Tail);
%% @todo data when local!=nofin
%% Send a file.
%%
%% @todo This implementation is terrible. A good implementation would
%% need to check that Bytes is exact (or we need to document that we
%% trust it to be exact), and would need to send the file asynchronously
%% in many data frames. Perhaps a sendfile call should result in a
%% process being created specifically for this purpose. Or perhaps
%% the protocol should be "dumb" and the stream handler be the one
%% to ensure the file is sent in chunks (which would require a better
%% flow control at the stream handler level). One thing for sure, the
%% implementation necessarily varies between HTTP/1.1 and HTTP/2.
commands(State=#state{socket=Socket, transport=Transport}, Stream=#stream{id=StreamID, local=nofin},
[{sendfile, IsFin, Offset, Bytes, Path}|Tail]) ->
%% @todo We currently have a naive implementation without a
%% scheduler to prioritize frames that need to be sent.
%% A future update will need to queue such data frames
%% and only send them when there is nothing currently
%% being sent. We would probably also benefit from doing
%% asynchronous sends.
sendfile(Socket, Transport, StreamID, IsFin, Offset, Bytes, Path, 16384),
commands(State, Stream#stream{local=IsFin}, Tail);
%% @todo sendfile when local!=nofin
%% Send a push promise.
%%
%% @todo We need to keep track of what promises we made so that we don't
%% end up with an infinite loop of promises.
commands(State0=#state{socket=Socket, transport=Transport, server_streamid=PromisedStreamID,
encode_state=EncodeState0}, Stream=#stream{id=StreamID},
[{push, Method, Scheme, Host, Port, Path, Qs, Headers0}|Tail]) ->
Authority = case {Scheme, Port} of
{<<"http">>, 80} -> Host;
{<<"https">>, 443} -> Host;
_ -> [Host, $:, integer_to_binary(Port)]
end,
PathWithQs = case Qs of
<<>> -> Path;
_ -> [Path, $?, Qs]
end,
Headers = Headers0#{<<":method">> => Method,
<<":scheme">> => Scheme,
<<":authority">> => Authority,
<<":path">> => PathWithQs},
{HeaderBlock, EncodeState} = headers_encode(Headers, EncodeState0),
Transport:send(Socket, cow_http2:push_promise(StreamID, PromisedStreamID, HeaderBlock)),
%% @todo iolist_to_binary(HeaderBlock) isn't optimal. Need a shortcut.
State = stream_init(State0#state{server_streamid=PromisedStreamID + 2, encode_state=EncodeState},
PromisedStreamID, fin, iolist_to_binary(HeaderBlock)),
commands(State, Stream, Tail);
%% @todo Update the flow control state.
commands(State, Stream, [{flow, _Size}|Tail]) ->
commands(State, Stream, Tail);
%% Supervise a child process.
commands(State=#state{children=Children}, Stream=#stream{id=StreamID},
[{spawn, Pid, _Shutdown}|Tail]) -> %% @todo Shutdown
commands(State#state{children=[{Pid, StreamID}|Children]}, Stream, Tail);
%% Error handling.
commands(State, Stream=#stream{id=StreamID}, [Error = {internal_error, _, _}|_Tail]) ->
%% @todo Do we want to run the commands after an internal_error?
%% @todo Do we even allow commands after?
%% @todo Only reset when the stream still exists.
stream_reset(after_commands(State, Stream), StreamID, Error);
%% @todo HTTP/2 has no support for the Upgrade mechanism.
commands(State, Stream, [{switch_protocol, _Headers, _Mod, _ModState}|Tail]) ->
%% @todo This is an error. Not sure what to do here yet.
commands(State, Stream, Tail);
commands(State, Stream=#stream{id=StreamID}, [stop|_Tail]) ->
%% @todo Do we want to run the commands after a stop?
%% @todo Do we even allow commands after?
stream_terminate(after_commands(State, Stream), StreamID, normal).
after_commands(State=#state{streams=Streams0}, Stream=#stream{id=StreamID}) ->
Streams = lists:keystore(StreamID, #stream.id, Streams0, Stream),
State#state{streams=Streams}.
status(Status) when is_integer(Status) ->
integer_to_binary(Status);
status(<< H, T, U, _/bits >>) when H >= $1, H =< $9, T >= $0, T =< $9, U >= $0, U =< $9 ->
<< H, T, U >>.
%% This same function is found in gun_http2.
send_data(Socket, Transport, StreamID, IsFin, Data, Length) ->
if
Length < byte_size(Data) ->
<< Payload:Length/binary, Rest/bits >> = Data,
Transport:send(Socket, cow_http2:data(StreamID, nofin, Payload)),
send_data(Socket, Transport, StreamID, IsFin, Rest, Length);
true ->
Transport:send(Socket, cow_http2:data(StreamID, IsFin, Data))
end.
%% @todo This is currently awfully slow. But at least it's correct.
sendfile(Socket, Transport, StreamID, IsFin, Offset, Bytes, Path, Length) ->
if
Length < Bytes ->
Transport:send(Socket, cow_http2:data_header(StreamID, nofin, Length)),
Transport:sendfile(Socket, Path, Offset, Length),
sendfile(Socket, Transport, StreamID, IsFin,
Offset + Length, Bytes - Length, Path, Length);
true ->
Transport:send(Socket, cow_http2:data_header(StreamID, IsFin, Bytes)),
Transport:sendfile(Socket, Path, Offset, Bytes)
end.
-spec terminate(#state{}, _) -> no_return().
terminate(undefined, Reason) ->
exit({shutdown, Reason});
terminate(#state{socket=Socket, transport=Transport, client_streamid=LastStreamID,
streams=Streams, children=Children}, Reason) ->
%% @todo We might want to optionally send the Reason value
%% as debug data in the GOAWAY frame here. Perhaps more.
Transport:send(Socket, cow_http2:goaway(LastStreamID, terminate_reason(Reason), <<>>)),
terminate_all_streams(Streams, Reason, Children),
Transport:close(Socket),
exit({shutdown, Reason}).
terminate_reason({connection_error, Reason, _}) -> Reason;
terminate_reason({stop, _, _}) -> no_error;
terminate_reason({socket_error, _, _}) -> internal_error;
terminate_reason({internal_error, _, _}) -> internal_error.
terminate_all_streams([], _, []) ->
ok;
terminate_all_streams([#stream{id=StreamID, state=StreamState}|Tail], Reason, Children0) ->
stream_call_terminate(StreamID, Reason, StreamState),
Children = stream_terminate_children(Children0, StreamID, []),
terminate_all_streams(Tail, Reason, Children).
%% Stream functions.
stream_init(State0=#state{ref=Ref, socket=Socket, transport=Transport, peer=Peer, decode_state=DecodeState0},
StreamID, IsFin, HeaderBlock) ->
%% @todo Add clause for CONNECT requests (no scheme/path).
try headers_decode(HeaderBlock, DecodeState0) of
{Headers0=#{
<<":method">> := Method,
<<":scheme">> := Scheme,
<<":authority">> := Authority,
<<":path">> := PathWithQs}, DecodeState} ->
State = State0#state{decode_state=DecodeState},
Headers = maps:without([<<":method">>, <<":scheme">>, <<":authority">>, <<":path">>], Headers0),
BodyLength = case Headers of
_ when IsFin =:= fin ->
0;
#{<<"content-length">> := <<"0">>} ->
0;
#{<<"content-length">> := BinLength} ->
Length = try
cow_http_hd:parse_content_length(BinLength)
catch _:_ ->
terminate(State0, {stream_error, StreamID, protocol_error,
'The content-length header is invalid. (RFC7230 3.3.2)'})
%% @todo Err should terminate here...
end,
Length;
_ ->
undefined
end,
{Host, Port} = cow_http_hd:parse_host(Authority),
{Path, Qs} = cow_http:parse_fullpath(PathWithQs),
Req = #{
ref => Ref,
pid => self(),
streamid => StreamID,
peer => Peer,
method => Method,
scheme => Scheme,
host => Host,
port => Port,
path => Path,
qs => Qs,
version => 'HTTP/2',
headers => Headers,
has_body => IsFin =:= nofin,
body_length => BodyLength
},
stream_handler_init(State, StreamID, IsFin, Req);
{_, DecodeState} ->
Transport:send(Socket, cow_http2:rst_stream(StreamID, protocol_error)),
State0#state{decode_state=DecodeState}
catch _:_ ->
terminate(State0, {connection_error, compression_error,
'Error while trying to decode HPACK-encoded header block. (RFC7540 4.3)'})
end.
stream_handler_init(State=#state{opts=Opts}, StreamID, IsFin, Req) ->
try cowboy_stream:init(StreamID, Req, Opts) of
{Commands, StreamState} ->
commands(State#state{client_streamid=StreamID},
#stream{id=StreamID, state=StreamState, remote=IsFin}, Commands)
catch Class:Reason ->
error_logger:error_msg("Exception occurred in "
"cowboy_stream:init(~p, ~p, ~p) with reason ~p:~p.",
[StreamID, IsFin, Req, Class, Reason]),
stream_reset(State, StreamID, {internal_error, {Class, Reason},
'Exception occurred in cowboy_stream:init/3.'})
end.
%% @todo We might need to keep track of which stream has been reset so we don't send lots of them.
stream_reset(State=#state{socket=Socket, transport=Transport}, StreamID,
StreamError={internal_error, _, _}) ->
Transport:send(Socket, cow_http2:rst_stream(StreamID, internal_error)),
stream_terminate(State, StreamID, StreamError);
stream_reset(State=#state{socket=Socket, transport=Transport}, StreamID,
StreamError={stream_error, Reason, _}) ->
Transport:send(Socket, cow_http2:rst_stream(StreamID, Reason)),
stream_terminate(State, StreamID, StreamError).
stream_terminate(State=#state{socket=Socket, transport=Transport,
streams=Streams0, children=Children0, encode_state=EncodeState0}, StreamID, Reason) ->
case lists:keytake(StreamID, #stream.id, Streams0) of
{value, #stream{state=StreamState, local=idle}, Streams} when Reason =:= normal ->
Headers = #{<<":status">> => <<"204">>},
{HeaderBlock, EncodeState} = headers_encode(Headers, EncodeState0),
Transport:send(Socket, cow_http2:headers(StreamID, fin, HeaderBlock)),
stream_call_terminate(StreamID, Reason, StreamState),
Children = stream_terminate_children(Children0, StreamID, []),
State#state{streams=Streams, children=Children, encode_state=EncodeState};
{value, #stream{state=StreamState, local=nofin}, Streams} when Reason =:= normal ->
Transport:send(Socket, cow_http2:data(StreamID, fin, <<>>)),
stream_call_terminate(StreamID, Reason, StreamState),
Children = stream_terminate_children(Children0, StreamID, []),
State#state{streams=Streams, children=Children};
{value, #stream{state=StreamState}, Streams} ->
stream_call_terminate(StreamID, Reason, StreamState),
Children = stream_terminate_children(Children0, StreamID, []),
State#state{streams=Streams, children=Children};
false ->
%% @todo Unknown stream. Not sure what to do here. Check again once all
%% terminate calls have been written.
State
end.
stream_call_terminate(StreamID, Reason, StreamState) ->
try
cowboy_stream:terminate(StreamID, Reason, StreamState)
catch Class:Reason ->
error_logger:error_msg("Exception occurred in "
"cowboy_stream:terminate(~p, ~p, ~p) with reason ~p:~p.",
[StreamID, Reason, StreamState, Class, Reason])
end.
stream_terminate_children([], _, Acc) ->
Acc;
stream_terminate_children([{Pid, StreamID}|Tail], StreamID, Acc) ->
exit(Pid, kill),
stream_terminate_children(Tail, StreamID, Acc);
stream_terminate_children([Child|Tail], StreamID, Acc) ->
stream_terminate_children(Tail, StreamID, [Child|Acc]).
%% Headers encode/decode.
headers_decode(HeaderBlock, DecodeState0) ->
{Headers, DecodeState} = cow_hpack:decode(HeaderBlock, DecodeState0),
{headers_to_map(Headers, #{}), DecodeState}.
%% This function is necessary to properly handle duplicate headers
%% and the special-case cookie header.
headers_to_map([], Acc) ->
Acc;
headers_to_map([{Name, Value}|Tail], Acc0) ->
Acc = case Acc0 of
%% The cookie header does not use proper HTTP header lists.
#{Name := Value0} when Name =:= <<"cookie">> -> Acc0#{Name => << Value0/binary, "; ", Value/binary >>};
#{Name := Value0} -> Acc0#{Name => << Value0/binary, ", ", Value/binary >>};
_ -> Acc0#{Name => Value}
end,
headers_to_map(Tail, Acc).
%% The set-cookie header is special; we can only send one cookie per header.
headers_encode(Headers0=#{<<"set-cookie">> := SetCookies}, EncodeState) ->
Headers1 = maps:to_list(maps:remove(<<"set-cookie">>, Headers0)),
Headers = Headers1 ++ [{<<"set-cookie">>, Value} || Value <- SetCookies],
cow_hpack:encode(Headers, EncodeState);
headers_encode(Headers0, EncodeState) ->
Headers = maps:to_list(Headers0),
cow_hpack:encode(Headers, EncodeState).
%% System callbacks.
-spec system_continue(_, _, {#state{}, binary()}) -> ok.
system_continue(_, _, {State, Buffer}) ->
loop(State, Buffer).
-spec system_terminate(any(), _, _, _) -> no_return().
system_terminate(Reason, _, _, _) ->
exit(Reason).
-spec system_code_change(Misc, _, _, _) -> {ok, Misc} when Misc::{#state{}, binary()}.
system_code_change(Misc, _, _, _) ->
{ok, Misc}.