aboutsummaryrefslogtreecommitdiffstats
path: root/test/http_SUITE.erl
AgeCommit message (Collapse)Author
2018-05-17Move timeout tests from old_http_SUITE to http_SUITELoïc Hoguin
Also fix the idle_timeout test which was producing an extra crash log.
2018-03-26Fix the flushing of messages when switching to WebsocketLoïc Hoguin
We now flush messages that are specific to cowboy_http only. Stream handlers should also flush their own specific messages if necessary, although timeouts will be flushed regardless of where they originate from. Also renames the http_SUITE to old_http_SUITE to distinguish new tests from old tests. Most old tests need to be removed or converted eventually as they're legacy tests from Cowboy 1.0.
2018-03-14Add case for handling infinity for idle/request_timeoutBartek Walkowicz
Currently cowboy assumes that idle_timeout or request_timeout is a number and always starts timers. Similar situation takes place in case of preface_timeout for http2. This commit adds case for handling infinity as a timeout, allowing to not start mentioned timers.
2018-01-16Allow colon within path segmentsPaul Fisher
Allow `cowboy_router:compile` to handle colon characters within path segments, rather than exiting with `badarg`. This is allowed via RFC 7230 2.7 -> [RFC 3986 3.3](https://tools.ietf.org/html/rfc3986#section-3.3): ``` segment = *pchar segment-nz = 1*pchar segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" ) ; non-zero-length segment without any colon ":" pchar = unreserved / pct-encoded / sub-delims / ":" / "@" ```
2017-12-12Fix HTTP/1.1 pipeliningLoïc Hoguin
Cases where a request body was involved could sometimes fail depending on timing. Also fix all of the old http_SUITE tests.
2017-11-29Add nowarn_export_all to all test suitesLoïc Hoguin
2017-11-24Add more tests to the rfc7230 suiteLoïc Hoguin
Found more bugs! Unfortunately no fix for them in this commit.
2017-11-23Move the pipeline test to the rfc7230 suiteLoïc Hoguin
2017-11-22Add more rfc7230 tests and better handle bad chunk sizesLoïc Hoguin
Bad chunk sizes used to be accepted and could result in a badly parsed body or a timeout. They are now properly rejected. Chunk extensions now have a hard limit of 129 characters. I haven't heard of anyone using them and Cowboy does not provide an interface for them, but we can always increase or make configurable if it ever becomes necessary (but I honestly doubt it). Also a test from the old http suite could be removed. Yay!
2017-11-19Remove another test from the old http suiteLoïc Hoguin
2017-11-19Move tests from old http suite to rfc7230 suiteLoïc Hoguin
2017-11-18Remove duplicate /echo/body_qs tests from the old suiteLoïc Hoguin
2017-11-17Remove duplicate static handler tests from the old suiteLoïc Hoguin
2017-07-14Fix the remaining http_SUITE test casesLoïc Hoguin
2017-07-13Fix more of the older testsLoïc Hoguin
The Cowboy behavior has changed a little and gives more accurate error responses now. And in some cases, successes.
2017-07-12Remove tests for set_resp_body with a stream funLoïc Hoguin
2017-07-12Remove any mention of the waiting_stream hackLoïc Hoguin
2017-07-12Remove the onresponse tests from http_SUITELoïc Hoguin
2017-06-28Remove outdated multipart testsLoïc Hoguin
They have equivalents in req_SUITE.
2017-06-07Remove NumAcceptors argument from start_clear/tlsLoïc Hoguin
They are now cowboy:start_clear/3 and cowboy:start_tls/3. The NumAcceptors argument can be specified via the num_acceptor transport option. Ranch has been updated to 1.4.0 to that effect.
2017-01-03Rewrite the tests for header name/value limitsLoïc Hoguin
Putting them in the correct test suite, with the proper documentation etc.
2017-01-03Return status 431 if the request header field is too largeJosé Valim
This commit changes Cowboy to follow RFC6585.
2017-01-02Welcome to 2017Loïc Hoguin
2016-10-18Fix if_modified_since match of last_modifiedChristopher Adams
Correct expected return type from `no_call` to `undefined` in if_modified_since when last_modified callback is not defined. Add an http_SUITE test to catch regressions.
2016-08-11Use integer_to_binary when possibleLoïc Hoguin
2016-03-05Initial commit with connection/streamsLoïc Hoguin
Breaking changes with previous commit. This is a very large change, and I am giving up on making a single commit that fixes everything. More commits will follow slowly adding back features, introducing new tests and fixing the documentation. This change contains most of the work toward unifying the interface for handling both HTTP/1.1 and HTTP/2. HTTP/1.1 connections are now no longer 1 process per connection; instead by default 1 process per request is also created. This has a number of pros and cons. Because it has cons, we also allow users to use a lower-level API that acts on "streams" (requests/responses) directly at the connection process-level. If performance is a concern, one can always write a stream handler. The performance in this case will be even greater than with Cowboy 1, although all the special handlers are unavailable. When switching to Websocket, after the handler returns from init/2, Cowboy stops the stream and the Websocket protocol takes over the connection process. Websocket then calls websocket_init/2 for any additional initialization such as timers, because the process is different in init/2 and websocket_*/* functions. This however would allow us to use websocket_init/2 for sending messages on connect, instead of sending ourselves a message and be subject to races. Note that websocket_init/2 is optional. This is all a big change and while most of the tests pass, some functionality currently doesn't. SPDY is broken and will be removed soon in favor of HTTP/2. Automatic compression is currently disabled. The cowboy_req interface probably still have a few functions that need to be updated. The docs and examples do not refer the current functionality anymore. Everything will be fixed over time. Feedback is more than welcome. Open a ticket!
2015-08-07Use 'Connection' header only when necessaryAlexey Lebedeff
Fixes #839 when 'Connection: Keep-Alive' wasn't sent in a HTTP/1.0 response. Now the usage of 'Connection' header is consistent with current protocol version: when this header is not specified explicitly in the response, HTTP/1.0 implies 'Connection: close' and HTTP/1.1 implies 'Connection: Keep-Alive'. So if current 'Connection' value matches the default value of current protocol, we won't state obvious fact in the response; and vice versa. Amended to fix and improve tests, and revert the variable name change from HTTP11Headers to StdHeaders. I think it's still good to leave it as is because it's not really a standard header for HTTP/1.0, and it's gone from HTTP/2 entirely.
2015-05-05Add rfc7230 test suite and update others to recent GunLoïc Hoguin
This is a large commit. The rfc7230 test suite adds many tests from the RFC7230 document. Gun has been updated quite a bit recently, which broke the Cowboy suites. This is now fixed with this commit. A new hook onfirstrequest has been added. It was very useful during debugging of the test suites. The initial process code has changed a little; more changes are expected with the switch to maps for options.
2015-02-04Use cowlib for parsing headers; remove cowboy_httpLoïc Hoguin
2014-11-07Rename 'halt' to 'stop' for better consistencyLoïc Hoguin
Now everywhere in Cowboy when we want to stop something we return a 'stop' tuple instead of one of the many choices depending on context that we had before. This particular change affects middlewares, sub protocols and REST handlers which were using 'halt' to stop processing.
2014-10-03Fix two edge cases when the request-line provided is invalidLoïc Hoguin
2014-09-30Improve handler interface and documentationLoïc Hoguin
This change simplifies a little more the sub protocols mechanism. Aliases have been removed. The renaming of loop handlers as long polling handlers has been reverted. Plain HTTP handlers now simply do their work in the init/2 callback. There is no specific code for them. Loop handlers now follow the same return value as Websocket, they use ok to continue and shutdown to stop. Terminate reasons for all handler types have been documented. The terminate callback is now appropriately called in all cases (or should be). Behaviors for all handler types have been moved in the module that implement them. This means that cowboy_handler replaces the cowboy_http_handler behavior, and similarly cowboy_loop replaces cowboy_loop_handler, cowboy_websocket replaces cowboy_websocket_handler. Finally cowboy_rest now has the start of a behavior in it and will have the full list of optional callbacks defined once Erlang 18.0 gets released. The guide has been reorganized and should be easier to follow.
2014-09-24Remove the onrequest hookLoïc Hoguin
It was redundant with middlewares. Allows us to save a few operations for every incoming requests.
2014-09-23Breaking update of the cowboy_req interfaceLoïc Hoguin
Simplify the interface for most cowboy_req functions. They all return a single value except the four body reading functions. The reply functions now only return a Req value. Access functions do not return a Req anymore. Functions that used to cache results do not have a cache anymore. The interface for accessing query string and cookies has therefore been changed. There are now three query string functions: qs/1 provides access to the raw query string value; parse_qs/1 returns the query string as a list of key/values; match_qs/2 returns a map containing the values requested in the second argument, after applying constraints and default value. Similarly, there are two cookie functions: parse_cookies/1 and match_cookies/2. More match functions will be added in future commits. None of the functions return an error tuple anymore. It either works or crashes. Cowboy will attempt to provide an appropriate status code in the response of crashed handlers. As a result, the content decode function has its return value changed to a simple binary, and the body reading functions only return on success.
2014-07-14Support ad-hoc keep-alive for HTTP/1.0 ClientsFred Hebert
Only go for keep-alive if they submit a 'connection: keep-alive' header in the request, keep behaviour the same otherwise. The new RFC 7230 (http://tools.ietf.org/html/rfc7230#section-6.3) states: If the received protocol is HTTP/1.0, the "keep-alive" connection option is present, the recipient is not a proxy, and the recipient wishes to honor the HTTP/1.0 "keep-alive" mechanism, the connection will persist after the current response; Even though clients are discouraged from doing so in Appendix A.1.2 (http://tools.ietf.org/html/rfc7230#appendix-A.1.2)
2014-07-12Reply with 400 on header parsing crashLoïc Hoguin
This is a first step to improve the HTTP status codes returned by Cowboy on crashes. We will tweak it over time. Also fixes a small bug where two replies may have been sent when using loop handlers under rare conditions.
2014-06-30Return 422 instead of 400 when AcceptResource returns falseLoïc Hoguin
422 is undefined for HTTP and interpreted as 400.
2014-06-10Allow users to pass a raw binary() as the expires header.Drew Varner
2014-06-02Add request body reading optionsLoïc Hoguin
The options were added to allow developers to fix timeout issues when reading large bodies. It is also a cleaner and easier to extend interface. This commit deprecates the functions init_stream, stream_body and skip_body which are no longer needed. They will be removed in 1.0. The body function can now take an additional argument that is a list of options. The body_qs, part and part_body functions can too and simply pass this argument down to the body call. There are options for disabling the automatic continue reply, setting a maximum length to be returned (soft limit), setting the read length and read timeout, and setting the transfer and content decode functions. The return value of the body and body_qs have changed slightly. The body function now works similarly to the part_body function, in that it returns either an ok or a more tuple depending on whether there is additional data to be read. The body_qs function can return a badlength tuple if the body is too big. The default size has been increased from 16KB to 64KB. The default read length and timeout have been tweaked and vary depending on the function called. The body function will now adequately process chunked bodies, which means that the body_qs function will too. But this means that the behavior has changed slightly and your code should be tested properly when updating your code. The body and body_qs still accept a length as first argument for compatibility purpose with older code. Note that this form is deprecated and will be removed in 1.0. The part and part_body function, being new and never having been in a release yet, have this form completely removed in this commit. Again, while most code should work as-is, you should make sure that it actually does before pushing this to production.
2014-04-26Add a test for multipart over chunked transfer-encodingLoïc Hoguin
2014-04-26Make loop handlers work with SPDYLoïc Hoguin
Adds a loop_handler test suite that runs all tests under HTTP, HTTPS, SPDY each with and without the compress option enabled. Fixes output filtering that used to filter more than it should have. This forces us to parse the string sent by the emulator, which means it's probably not perfect yet. But it should at least not hide errors we want to see. Fix a crash in the output filtering code that entirely disabled output. Now when there is a crash the normal tty output is restored. Handlers are now in test/handlers/ as they can be reused between suites. Only generate a single certificate for the whole ct run to speed things up when we got many different test groups each needing certificates.
2014-04-24Fix two issues where listeners didn't get stopped properlyLoïc Hoguin
2014-04-22Move listener initialization to cowboy_testLoïc Hoguin
2014-04-22Start applications directly from the ct hookLoïc Hoguin
2014-04-20Enable Autobahn Test Suite by defaultLoïc Hoguin
Includes a variety of small changes that are a first step to improving the test system heavily.
2014-04-17Cleanup the configuration handling in http_SUITELoïc Hoguin
2014-04-11Fix application start order in tests, gun depends on cowlibLoïc Hoguin
2014-03-24Remove cowboy_client; use gun for the HTTP test suiteLoïc Hoguin
2014-02-06Add and document the new multipart codeLoïc Hoguin
The old undocumented API is removed entirely. While a documentation exists for the new API, it will not be considered set in stone until further testing has been performed, and a file upload example has been added. The new API should be a little more efficient than the old API, especially with smaller messages.
2013-12-28Fix a small typo in a testLoïc Hoguin