| Age | Commit message (Collapse) | Author |
|---|
|
Pretty much just an alias for a combination of set_resp_header and cookie.
|
|
It was replying back the correct error, but with a crash message in
the console. This patch prevents it from crashing.
Fixes issue #94 reported by oribrost.
|
|
As with everything experimental, it probably has a lot of bugs and
may not even work.
Like Websocket, REST must be upgraded from a standard resource through
the init/3 function.
A key difference between Webmachine and Cowboy's REST protocol handler
is that in Cowboy the resource has direct access to the request object.
This makes a small change in a few places where you were expected to
return headers or body in Webmachine and are now expected to set them
directly yourself if needed (options/2, for example).
Another difference is that the functions rest_init/2 will always be
called when starting to process a request. Similarly, rest_terminate/2
will be called when the process completes successfully.
The Cowboy REST support also includes automatic language selection,
thanks to the languages_provided/2 callback.
Finally, Cowboy REST expects full URIs to be given at all times, and
will not try to reconstruct URIs from fragments.
Note that REST requests cannot be chained (keepalive) at this time.
This is a design issue in cowboy_http_protocol that will be fixed soon.
Check out the source for more details. It has been designed to be very
easy to read and understand so if you don't understand something,
it's probably a bug. Thanks in advance for all the great bug reports,
pull requests and comments you'll forward my way!
|
|
The test still worked because we expect the websocket connection
to fail, but it didn't fail exactly the way we wanted it to.
|
|
These functions allow to set response headers and body in advance,
before calling any of the reply functions.
Also add has_resp_header/2 and has_resp_body/1 to check if the given
response headers have already been set.
|
|
|
|
|
|
Allows to limit the size of request and header lines, thus preventing
Cowboy from infinitely reading from the socket and never finding an
end of line.
Defaults to 4096 bytes.
|
|
|
|
New functions are reply/2, reply/3, chunked_reply/2 in cowboy_http_req.
|
|
Now init/3 can return one of the following values to enable loops:
- {loop, Req, State}
- {loop, Req, State, hibernate}
- {loop, Req, State, Timeout}
- {loop, Req, State, Timeout, hibernate}
Returning one of these tuples will activate looping in the HTTP handler.
When looping, handle/2 is never called. Instead, Cowboy will listen
for Erlang messages and forward them to the info/3 function of the
handler. If a timeout is defined, Cowboy will also close the connection
when no message has been received for Timeout milliseconds.
The info/3 function is defined as info(Msg, Req, State). It can return
either of the following tuples:
- {ok, Req, State}
- {loop, Req, State}
- {loop, Req, State, hibernate}
The first one ends the connection, calling terminate/2 before closing.
The others continue the loop.
Loops are useful when writing long-polling handlers that need to wait
and don't expect to receive anything. Therefore it is recommended to
set a timeout to close the connection if nothing arrives after a while
and to enable hibernate everywhere.
Normal HTTP handlers shouldn't need to use this and as such info/3
was made optional.
|
|
This change allows application developers to refuse websocket upgrades
by returning {shutdown, Req}. The application can also send a reply
with a custom error before returning from websocket_init/3, otherwise
an error 400 is sent.
Note that right now Cowboy closes the connection immediately. Also note
that neither terminate/3 nor websocket_terminate/3 will be called when
the connection is shutdown by websocket_init/3.
|
|
You can now return {shutdown, Req, State} from Handler:init/3
to skip the handle/2 step.
Also allow init/3 function to send responses.
|
|
|
|
Now Cowboy checks headers sent to the client for the 'Connection'
header value, parses it, and checks whether it contains a 'close'
or 'keep-alive' value. It makes sure to close or keep the connection
alive depending on the value found there, if any.
Also change chunked replies to not close the connection by default
unless the application requests it.
|
|
Also add a call to compact/1 in the websocket test handler so we may
catch bugs related to it faster later on.
|
|
The server should not send a response if there wasn't at least
the beginning of a request sent (the Request-Line).
|
|
If the websocket frame handling code in cowboy_http_websocket receives
only 1 byte at a time, it fails with a badmatch in
cowboy_http_websocket:websocket_data/4. This commit fixes the problem
and introduces a test of the correct behaviour.
|
|
The issue was that we were calling erlang:hibernate before a
receive .. after .. end call. Erlang hibernates the process before
reaching the receive instruction and we therefore couldn't enter
the after clause when hibernating.
This is now fixed by using erlang:send_after instead and receiving
that message instead of using an after clause.
|
|
Krishnamurthy, Kristol, Mogul: "Key Differences between HTTP/1.0
and HTTP/1.1", "Internet address conservation".
http://www8.org/w8-papers/5c-protocols/key/key.html
Fixes issue #35 reported by Alex Kropivny.
|
|
Fixes issue #47.
|
|
The implementation is only partial for now but should work for
all browsers implementing it.
|
|
Mostly thanks to Magnus Klaar as it took me a while to figure
out how PropEr tests had to be written.
|
|
Improves the readability of websocket handler code by having
two functions: websocket_handle/3 handles the packets received
from the socket, removing the tuple construct that was otherwise
needed, so only websocket_handle(Data, Req, State) is needed now;
websocket_info/3 handles the messages that the websocket handler
process received, as websocket_info(Info, Req, State).
Both functions return values are handled identically by Cowboy
so nothing changes on that end.
|
|
Browsers get mad that the returned location address is not the same
as what they sent, since the :(80|443) is stripped.
Add a simple eunit test due to existing ct websockets tests not
covering this case.
|
|
Send the status line and headers using
cowboy_http_req:chunked_reply/3, and
individual chunks with cowboy_http_req:chunk/2.
|
|
The previous commit switching to raw recv + erlang:decode_packet/3
works around the OTP bug regarding headers size in http recv.
|
|
The server now does a single recv (or more, but only if needed)
which is then sent to erlang:decode_packet/3 multiple times. Since
most requests are smaller than the default MTU on many platforms,
we benefit from this greatly.
In the case of requests with a body, the server usually read at
least part of the body on the first recv. This is bufferized
properly and used when later retrieving the body.
In the case of pipelined requests, we can end up reading many
requests in a single recv, which are then handled properly using
only the buffer containing the received data.
|
|
Returns the port given in the Host header if present,
otherwise the default port of 443 for HTTPS and 80 for HTTP
is returned.
|
|
Basically:
cat /dev/urandom | nc host port
Only run this test if cat and nc are available.
|
|
|
|
Now the server defines default headers that can be overwritten by the
handler simply by passing them to the reply/4 function. Default headers
include, for now, Connection and Content-Length headers. Note that it isn't
enough to change the Connection header to close a keep-alive connection
server-side.
|
|
|
|
|
|
Defaults to 5. Prevents someone from indefinitely sending empty lines.
|
|
|
|
|
|
Handles two basic tests for both HTTP and HTTPS.
Also renames 'make test' into 'make tests'.
|
