| Age | Commit message (Collapse) | Author |
|---|
|
This is a large commit.
The rfc7230 test suite adds many tests from the RFC7230 document.
Gun has been updated quite a bit recently, which broke the Cowboy
suites. This is now fixed with this commit.
A new hook onfirstrequest has been added. It was very useful during
debugging of the test suites.
The initial process code has changed a little; more changes are
expected with the switch to maps for options.
|
|
The Websocket text frames should also be less resource intensive
to validate now, with a binary concatenation avoided.
|
|
User code may sometimes send an empty value which gets understood
by the client as being the end of the stream while this was not
intended. Ignoring empty values allow making sure the stream isn't
ended by mistake.
|
|
|
|
|
|
Now everywhere in Cowboy when we want to stop something we return
a 'stop' tuple instead of one of the many choices depending on
context that we had before.
This particular change affects middlewares, sub protocols and
REST handlers which were using 'halt' to stop processing.
|
|
The 'shutdown' atom has a specific meaning inside OTP. We are
instead going to use 'stop' which is pretty much the equivalent
of what we actually do. 'shutdown' is now reserved for future
special processes implementation.
|
|
Wasn't following the same order as the rest of the module.
|
|
|
|
This change simplifies a little more the sub protocols mechanism.
Aliases have been removed. The renaming of loop handlers as long
polling handlers has been reverted.
Plain HTTP handlers now simply do their work in the init/2
callback. There is no specific code for them.
Loop handlers now follow the same return value as Websocket,
they use ok to continue and shutdown to stop.
Terminate reasons for all handler types have been documented.
The terminate callback is now appropriately called in all cases
(or should be).
Behaviors for all handler types have been moved in the module
that implement them. This means that cowboy_handler replaces
the cowboy_http_handler behavior, and similarly cowboy_loop
replaces cowboy_loop_handler, cowboy_websocket replaces
cowboy_websocket_handler. Finally cowboy_rest now has the
start of a behavior in it and will have the full list of
optional callbacks defined once Erlang 18.0 gets released.
The guide has been reorganized and should be easier to follow.
|
|
This set of changes is the first step to simplify the
writing of handlers, by removing some extraneous
callbacks and making others optional.
init/3 is now init/2, its first argument being removed.
rest_init/2 and rest_terminate/2 have been removed.
websocket_init/3 and websocket_terminate/3 have been removed.
terminate/3 is now optional. It is called regardless of
the type of handler, including rest and websocket.
The return value of init/2 changed. It now returns
{Mod, Req, Opts} with Mod being either one of the four
handler type or a custom module. It can also return extra
timeout and hibernate options.
The signature for sub protocols has changed, they now
receive these extra timeout and hibernate options.
Loop handlers are now implemented in cowboy_long_polling,
and will be renamed throughout the project in a future commit.
|
|
|
|
It was redundant with middlewares. Allows us to save a few operations
for every incoming requests.
|
|
Simplify the interface for most cowboy_req functions. They all return
a single value except the four body reading functions. The reply functions
now only return a Req value.
Access functions do not return a Req anymore.
Functions that used to cache results do not have a cache anymore.
The interface for accessing query string and cookies has therefore
been changed.
There are now three query string functions: qs/1 provides access
to the raw query string value; parse_qs/1 returns the query string
as a list of key/values; match_qs/2 returns a map containing the
values requested in the second argument, after applying constraints
and default value.
Similarly, there are two cookie functions: parse_cookies/1 and
match_cookies/2. More match functions will be added in future commits.
None of the functions return an error tuple anymore. It either works
or crashes. Cowboy will attempt to provide an appropriate status code
in the response of crashed handlers.
As a result, the content decode function has its return value changed
to a simple binary, and the body reading functions only return on success.
|
|
Only go for keep-alive if they submit a 'connection: keep-alive' header
in the request, keep behaviour the same otherwise.
The new RFC 7230 (http://tools.ietf.org/html/rfc7230#section-6.3)
states:
If the received protocol is HTTP/1.0, the "keep-alive" connection
option is present, the recipient is not a proxy, and the recipient
wishes to honor the HTTP/1.0 "keep-alive" mechanism, the
connection will persist after the current response;
Even though clients are discouraged from doing so in Appendix A.1.2
(http://tools.ietf.org/html/rfc7230#appendix-A.1.2)
|
|
|
|
|
|
This is a first step to improve the HTTP status codes returned
by Cowboy on crashes. We will tweak it over time.
Also fixes a small bug where two replies may have been sent
when using loop handlers under rare conditions.
|
|
|
|
422 is undefined for HTTP and interpreted as 400.
|
|
|
|
The options were added to allow developers to fix timeout
issues when reading large bodies. It is also a cleaner and
easier to extend interface.
This commit deprecates the functions init_stream, stream_body
and skip_body which are no longer needed. They will be removed
in 1.0.
The body function can now take an additional argument that is a
list of options. The body_qs, part and part_body functions can
too and simply pass this argument down to the body call.
There are options for disabling the automatic continue reply,
setting a maximum length to be returned (soft limit), setting
the read length and read timeout, and setting the transfer and
content decode functions.
The return value of the body and body_qs have changed slightly.
The body function now works similarly to the part_body function,
in that it returns either an ok or a more tuple depending on
whether there is additional data to be read. The body_qs function
can return a badlength tuple if the body is too big. The default
size has been increased from 16KB to 64KB.
The default read length and timeout have been tweaked and vary
depending on the function called.
The body function will now adequately process chunked bodies,
which means that the body_qs function will too. But this means
that the behavior has changed slightly and your code should be
tested properly when updating your code.
The body and body_qs still accept a length as first argument
for compatibility purpose with older code. Note that this form
is deprecated and will be removed in 1.0. The part and part_body
function, being new and never having been in a release yet, have
this form completely removed in this commit.
Again, while most code should work as-is, you should make sure
that it actually does before pushing this to production.
|
|
|
|
Adds a loop_handler test suite that runs all tests under HTTP, HTTPS,
SPDY each with and without the compress option enabled.
Fixes output filtering that used to filter more than it should have.
This forces us to parse the string sent by the emulator, which means
it's probably not perfect yet. But it should at least not hide errors
we want to see.
Fix a crash in the output filtering code that entirely disabled
output. Now when there is a crash the normal tty output is restored.
Handlers are now in test/handlers/ as they can be reused between
suites.
Only generate a single certificate for the whole ct run to speed
things up when we got many different test groups each needing
certificates.
|
|
|
|
|
|
|
|
The errors are still logged by common_test to the report it creates.
The process that is going to crash has to call cowboy_error_h:ignore/3
with the MFA where the crash is expected to occur for it to be ignored.
Gun retry failures are also ignored. Only unexpected crashes are printed.
|
|
Includes a variety of small changes that are a first step to
improving the test system heavily.
|
|
|
|
|
|
|
|
|
|
|
|
The old undocumented API is removed entirely.
While a documentation exists for the new API, it will not
be considered set in stone until further testing has been
performed, and a file upload example has been added.
The new API should be a little more efficient than the
old API, especially with smaller messages.
|
|
|
|
|
|
|
|
Previously if a loop handler received the timeout message from a
previous request on the same connection the socket would be set to
{active, once} incorrectly - when a socket packet was already in the
message queue. This second packet would not be added to the buffer
before a Handler:info/3 call if a user message was in the message
queue before both socket packets.
|
|
This is an undocumented workaround to disable chunks when using HTTP/1.1.
It can be used when the client advertises itself as HTTP/1.1 despite not
understanding the chunked transfer-encoding.
Usage can be found looking at the test for it. When activated, Cowboy
will still advertise itself as HTTP/1.1, but will send the body the same
way it would if it was HTTP/1.0.
|
|
Changes include:
* Much simplified route configuration.
* Etag generation is now enabled by default.
* Web mimetypes are now detected by default. A bigger list of
mimetypes can be detected without any additional library.
* Mimetypes can no longer be specified as a list. Copying this
list for new connections is too costy. You can easily convert
it into a function and pass that function to the handler instead.
* You can however specify a single hardcoded mimetype. Mostly
useful when serving a single file, like an index.html file,
to avoid extra operations.
* Specifying a path as a list of tokens is not possible anymore.
Use either a binary or a string.
* Using a private directory will not work if the application
was not started properly. Cowboy will not attempt to find
the location of this directory if the VM doesn't know it,
as this caused issues in some setups.
* Overall the code has been much simplified and clarified,
and of course has now been documented.
|
|
Not that it matters for the test, but still.
|
|
Start moving a few functions from Cowboy into cowlib.
|
|
|
|
|
|
And various other improvements following the addition of two tests.
New dependency cowlib that will gradually receive most of the parse
code from SPDY but also HTTP and its headers.
|
|
|
|
|
|
|
|
Previously cowboy_http:te_chunked/2 would enter an incorrect state if
it tried to parse an incomplete chunk when the length was known from the
partial chunk.
Previosuly cowboy_http:te_chunked/2 expected the trailing "\r\n" to
always be present if chunk body was present in the buffer. This is not
guaranteed and so this commit accommodates that situation.
|
