== HTTP
This chapter describes how to use the Gun client for
communicating with an HTTP/1.1 or SPDY server.
=== Streams
Every time a request is initiated, Gun creates a _stream_.
A _stream reference_ uniquely identifies a set of request and
response(s) and must be used to perform additional operations
with a stream or to identify its messages.
Stream references use the Erlang _reference_ data type and
are therefore unique.
Streams can be canceled at any time. This will stop any further
messages from being sent to the owner process. Depending on
its capabilities, the server will also be instructed to cancel
the request.
Canceling a stream may result in Gun dropping the connection
temporarily, to avoid uploading or downloading data that will
not be used.
.Cancelling a stream
[source,erlang]
gun:cancel(ConnPid, StreamRef).
=== Sending requests
Gun provides many convenient functions for performing common
operations, like GET, POST or DELETE. It also provides a
general purpose function in case you need other methods.
The availability of these methods on the server can vary
depending on the software used but also on a per-resource
basis.
Gun will automatically set a few headers depending on the
method used. For all methods however it will set the host
header if it has not been provided in the request arguments.
This section focuses on the act of sending a request. The
handling of responses will be explained further on.
==== GET and HEAD
Use `gun:get/{2,3}` to request a resource.
.GET "/organizations/ninenines"
[source,erlang]
StreamRef = gun:get(ConnPid, "/organizations/ninenines").
.GET "/organizations/ninenines" with custom headers
[source,erlang]
StreamRef = gun:get(ConnPid, "/organizations/ninenines", [
{<<"accept">>, "application/json"},
{<<"user-agent">>, "revolver/1.0"}
]).
Note that the list of headers has the field name as a binary.
The field value is iodata, which is either a binary or an
iolist.
Use `gun:head/{2,3}` if you don't need the response body.
.HEAD "/organizations/ninenines"
[source,erlang]
StreamRef = gun:head(ConnPid, "/organizations/ninenines").
.HEAD "/organizations/ninenines" with custom headers
[source,erlang]
StreamRef = gun:head(ConnPid, "/organizations/ninenines", [
{<<"accept">>, "application/json"},
{<<"user-agent">>, "revolver/1.0"}
]).
It is not possible to send a request body with a GET or HEAD
request.
==== POST, PUT and PATCH
HTTP defines three methods to create or update a resource.
POST is generally used when the resource identifier (URI) isn't known
in advance when creating the resource. POST can also be used to
replace an existing resource, although PUT is more appropriate
in that situation.
PUT creates or replaces a resource identified by the URI.
PATCH provides instructions on how to modify the resource.
Both POST and PUT send the entire resource representation in their
request body. The PATCH method can be used when this is not
desirable. The request body of a PATCH method may be a partial
representation or a list of instructions on how to update the
resource.
The `gun:post/4`, `gun:put/4` and `gun:patch/4` functions
take a body as their fourth argument. These functions do
not require any body-specific header to be set, although
it is always recommended to set the content-type header.
Gun will set the other headers automatically.
In this and the following examples in this section, `gun:post`
can be replaced by `gun:put` or `gun:patch` for performing
a PUT or PATCH request, respectively.
.POST "/organizations/ninenines"
[source,erlang]
Body = "{\"msg\": \"Hello world!\"}",
StreamRef = gun:post(ConnPid, "/organizations/ninenines", [
{<<"content-type">>, "application/json"}
], Body).
The `gun:post/3`, `gun:put/3` and `gun:patch/3` functions
do not take a body in their arguments. If a body is to be
provided later on, using the `gun:data/4` function, then
the request headers must indicate this. This can be done
by setting the content-length or content-type request
headers. If these headers are not set then Gun will assume
the request has no body.
It is recommended to send the content-length header if you
know it in advance, although this is not required. If it
is not set, HTTP/1.1 will use the chunked transfer-encoding,
and SPDY will continue normally as it is chunked by design.
@todo Stop relying on transfer encoding header in Gun
@todo SPDY needs to remove invalid headers, and to detect
a body if content-length is set
.POST "/organizations/ninenines" with delayed body
[source,erlang]
Body = "{\"msg\": \"Hello world!\"}",
StreamRef = gun:post(ConnPid, "/organizations/ninenines", [
{<<"content-length">>, integer_to_binary(length(Body))},
{<<"content-type">>, "application/json"}
]),
gun:data(ConnPid, StreamRef, fin, Body).
The atom `fin` indicates this is the last chunk of data to
be sent. You can call the `gun:data/4` function as many
times as needed until you have sent the entire body. The
last call must use `fin` and all the previous calls must
use `nofin`. The last chunk may be empty.
@todo what to do about empty chunk, ignore?
.Streaming the request body
[source,erlang]
----
sendfile(ConnPid, StreamRef, Filepath) ->
{ok, IoDevice} = file:open(Filepath, [read, binary, raw]),
do_sendfile(ConnPid, StreamRef, IoDevice).
do_sendfile(ConnPid, StreamRef, IoDevice) ->
case file:read(IoDevice, 8000) of
eof ->
gun:data(ConnPid, StreamRef, fin, <<>>),
file:close(IoDevice);
{ok, Bin} ->
gun:data(ConnPid, StreamRef, nofin, Bin),
do_sendfile(ConnPid, StreamRef, IoDevice)
end.
----
==== DELETE
Use `gun:delete/{2,3}` to delete a resource.
.DELETE "/organizations/ninenines"
[source,erlang]
StreamRef = gun:delete(ConnPid, "/organizations/ninenines").
.DELETE "/organizations/ninenines" with custom headers
[source,erlang]
StreamRef = gun:delete(ConnPid, "/organizations/ninenines", [
{<<"user-agent">>, "revolver/1.0"}
]).
==== OPTIONS
Use `gun:options/{2,3}` to request information about a resource.
.OPTIONS "/organizations/ninenines"
[source,erlang]
StreamRef = gun:options(ConnPid, "/organizations/ninenines").
.OPTIONS "/organizations/ninenines" with custom headers
[source,erlang]
StreamRef = gun:options(ConnPid, "/organizations/ninenines", [
{<<"user-agent">>, "revolver/1.0"}
]).
You can also use this function to request information about
the server itself.
.OPTIONS "*"
[source,erlang]
StreamRef = gun:options(ConnPid, "*").
==== Requests with an arbitrary method
The `gun:request/{4,5}` function can be used to send requests
with a configurable method name. It is mostly useful when you
need a method that Gun does not understand natively.
.Example of a TRACE request
[source,erlang]
gun:request(ConnPid, "TRACE", "/", [
{<<"max-forwards">>, "30"}
]).
=== Processing responses
All data received from the server is sent to the owner
process as a message. First a `gun_response` message is sent,
followed by zero or more `gun_data` messages. If something goes wrong,
a `gun_error` message is sent instead.
The response message will inform you whether there will be
data messages following. If it contains `fin` there will be
no data messages. If it contains `nofin` then one or more data
messages will follow.
When using SPDY this value is sent with the frame and simply
passed on in the message. When using HTTP/1.1 however Gun must
guess whether data will follow by looking at the response headers.
You can receive messages directly, or you can use the _await_
functions to let Gun receive them for you.
.Receiving a response using receive
[source,erlang]
----
print_body(ConnPid, MRef) ->
StreamRef = gun:get(ConnPid, "/"),
receive
{gun_response, ConnPid, StreamRef, fin, Status, Headers} ->
no_data;
{gun_response, ConnPid, StreamRef, nofin, Status, Headers} ->
receive_data(ConnPid, MRef, StreamRef);
{'DOWN', MRef, process, ConnPid, Reason} ->
error_logger:error_msg("Oops!"),
exit(Reason)
after 1000 ->
exit(timeout)
end.
receive_data(ConnPid, MRef, StreamRef) ->
receive
{gun_data, ConnPid, StreamRef, nofin, Data} ->
io:format("~s~n", [Data]),
receive_data(ConnPid, MRef, StreamRef);
{gun_data, ConnPid, StreamRef, fin, Data} ->
io:format("~s~n", [Data]);
{'DOWN', MRef, process, ConnPid, Reason} ->
error_logger:error_msg("Oops!"),
exit(Reason)
after 1000 ->
exit(timeout)
end.
----
While it may seem verbose, using messages like this has the
advantage of never locking your process, allowing you to
easily debug your code. It also allows you to start more than
one connection and concurrently perform queries on all of them
at the same time.
You can also use Gun in a synchronous manner by using the _await_
functions.
The `gun:await/{2,3,4}` function will wait until it receives
a response. The `gun:await/2` call will automatically monitor
the process and use a timeout of 5000. The monitor and the
timeout can be passed by using `gun:await/3` or `gun:await/4`.
The `gun:await_body/{2,3,4}` works similarly, but returns the
body received.
.Receiving a response using await
[source,erlang]
StreamRef = gun:get(ConnPid, "/"),
case gun:await(ConnPid, StreamRef) of
{response, fin, Status, Headers} ->
no_data;
{response, nofin, Status, Headers} ->
{ok, Body} = gun:await_body(ConnPid, StreamRef),
io:format("~s~n", [Body])
end.
=== Handling streams pushed by the server
The SPDY protocol allows the server to push more than one
resource for every request. It will start sending those
extra resources before it starts sending the response itself,
so Gun will send you `gun_push` messages before `gun_response`
when that happens.
You can safely choose to ignore `gun_push` messages, or
you can handle them. If you do, you can either receive the
messages directly or use _await_ functions.
The `gun_push` message contains both the new stream reference
and the stream reference of the original request.
.Receiving a pushed response using receive
[source,erlang]
receive
{gun_push, ConnPid, OriginalStreamRef, PushedStreamRef,
Method, Host, Path, Headers} ->
enjoy()
end.
If you use the `gun:await/{2,3,4}` function, however, Gun
will use the original reference to identify the message but
will return a tuple that doesn't contain it.
.Receiving a pushed response using await
[source,erlang]
{push, PushedStreamRef, Method, Host, Path, Headers}
= gun:await(ConnPid, OriginalStreamRef).
The `PushedStreamRef` variable can then be used with `gun:await_body/{2,3,4}`
if needed.
=== Flushing unwanted messages
Gun provides the function `gun:flush/1` to quickly get rid
of unwanted messages sitting in the process mailbox. You
can use it to get rid of all messages related to a connection,
or just the messages related to a stream.
.Flush all messages from a Gun connection
[source,erlang]
gun:flush(ConnPid).
.Flush all messages from a specific stream
[source,erlang]
gun:flush(StreamRef).
