From 2368dc53d0c724f1899aeb2874ba1a763e11f0b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lo=C3=AFc=20Hoguin?= Date: Mon, 29 Jan 2024 15:40:26 +0100 Subject: Cowboy 2.11 --- docs/en/cowboy/2.5/manual/cowboy_stream/index.html | 444 --------------------- 1 file changed, 444 deletions(-) delete mode 100644 docs/en/cowboy/2.5/manual/cowboy_stream/index.html (limited to 'docs/en/cowboy/2.5/manual/cowboy_stream/index.html') diff --git a/docs/en/cowboy/2.5/manual/cowboy_stream/index.html b/docs/en/cowboy/2.5/manual/cowboy_stream/index.html deleted file mode 100644 index 4edda362..00000000 --- a/docs/en/cowboy/2.5/manual/cowboy_stream/index.html +++ /dev/null @@ -1,444 +0,0 @@ - - - - - - - - - - Nine Nines: cowboy_stream(3) - - - - - - - - - - - - - -

- - - -

- -

cowboy_stream(3)

- -

Name

cowboy_stream - Stream handlers

Description

The module cowboy_stream defines a callback interface and a protocol for handling HTTP streams.

An HTTP request and its associated response is called a stream. A connection may have many streams. In HTTP/1.1 they are executed sequentially, while in HTTP/2 they are executed concurrently.

Cowboy calls the stream handler for nearly all events related to a stream. Exceptions vary depending on the protocol.

Extra care must be taken when implementing stream handlers to ensure compatibility. While some modification of the events and commands is allowed, it is generally not a good idea to completely omit them.

Callbacks

Stream handlers must implement the following interface:

init(StreamID, Req, Opts) -> {Commands, State}
-data(StreamID, IsFin, Data, State) -> {Commands, State}
-info(StreamID, Info, State) -> {Commands, State}
-terminate(StreamID, Reason, State) -> any()
-early_error(StreamID, Reason, PartialReq, Resp, Opts) -> Resp
-
-StreamID   :: cowboy_stream:streamid()
-Req        :: cowboy_req:req()
-Opts       :: cowboy:opts()
-Commands   :: cowboy_stream:commands()
-State      :: any()
-IsFin      :: cowboy_stream:fin()
-Data       :: binary()
-Info       :: any()
-Reason     :: cowboy_stream:reason()
-PartialReq  - cowboy_req:req(), except all fields are optional
-Resp       :: cowboy_stream:resp_command()

HTTP/1.1 will initialize a stream only when the request-line and all headers have been received. When errors occur before that point Cowboy will call the callback early_error/5 with a partial request, the error reason and the response Cowboy intends to send. All other events go throuh the stream handler using the normal callbacks.

HTTP/2 will initialize the stream when the HEADERS block has been fully received and decoded. Any protocol error occuring before that will not result in a response being sent and will therefore not go through the stream handler. In addition Cowboy may terminate streams without sending an HTTP response back.

The stream is initialized by calling init/3. All streams that are initialized will eventually be terminated by calling terminate/3.

When Cowboy receives data for the stream it will call data/4. The data given is the request body after any transfer decoding has been applied.

When Cowboy receives a message addressed to a stream, or when Cowboy needs to inform the stream handler that an internal event has occurred, it will call info/3.

Commands

Stream handlers can return a list of commands to be executed from the init/3, data/4 and info/3 callbacks. In addition, the early_error/5 callback must return a response command.

- - -

The following commands are defined:

inform

Send an informational response to the client.

{inform, cowboy:http_status(), cowboy:http_headers()}

Any number of informational responses may be sent, but only until the final response is sent.

response

Send a response to the client.

{response, cowboy:http_status(), cowboy:http_headers(),
-    cowboy_req:resp_body()}

No more data can be sent after this command.

headers

Initiate a response to the client.

{headers, cowboy:http_status(), cowboy:http_headers()}

This initiates a response to the client. The stream will end when a data command with the fin flag or a trailer command is returned.

data

Send data to the client.

{data, fin(), iodata()}

trailers

Send response trailers to the client.

{trailers, cowboy:http_headers()}

push

Push a resource to the client.

{push, Method, Scheme, Host, inet:port_number(),
-    Path, Qs, cowboy:http_headers()}
-
-Method = Scheme = Host = Path = Qs = binary()

The command will be ignored if the protocol does not provide any server push mechanism.

flow

{flow, pos_integer()}

Request more data to be read from the request body. The exact behavior depends on the protocol.

spawn

Inform Cowboy that a process was spawned and should be supervised.

{spawn, pid(), timeout()}

error_response

Send an error response if no response was sent previously.

{error_response, cowboy:http_status(), cowboy:http_headers(), iodata()}

switch_protocol

Switch to a different protocol.

{switch_protocol, cowboy:http_headers(), module(), state()}

Contains the headers that will be sent in the 101 response, along with the module implementing the protocol we are switching to and its initial state.

Note that the 101 informational response will not be sent after a final response.

stop

Stop the stream.

stop

While no more data can be sent after the fin flag was set, the stream is still tracked by Cowboy until it is stopped by the handler.

The behavior when stopping a stream for which no response has been sent will vary depending on the protocol. The stream will end successfully as far as the client is concerned.

To indicate that an error occurred, either use error_response before stopping, or use internal_error.

internal_error

Stop the stream with an error.

{internal_error, Reason, HumanReadable}
-
-Reason        = any()
-HumanReadable = atom()

This command should be used when the stream cannot continue because of an internal error. An error_response command may be sent before that to advertise to the client why the stream is dropped.

Predefined events

Cowboy will forward all messages sent to the stream to the info/3 callback. To send a message to a stream, send a message to the connection process with the form {{Pid, StreamID}, Msg}. The connection process will then forward Msg to the stream handlers.

Cowboy will also forward the exit signals for the processes that the stream spawned.

EXIT

- - - -

A process spawned by this stream has exited.

{'EXIT', pid(), any()}

This is the raw exit message without any modification.

- - - - - - -

inform

Same as the inform command.

Sent when the request process reads the body and an expect: 100-continue header was present in the request, or when the request process sends an informational response on its own.

response

Same as the response command.

Usually sent when the request process replies to the client. May also be sent by Cowboy internally.

headers

Same as the headers command.

Sent when the request process starts replying to the client.

data

Same as the data command.

Sent when the request process streams data to the client.

trailers

Same as the trailers command.

Sent when the request process sends the trailer field values to the client.

push

Same as the push command.

Sent when the request process pushes a resource to the client.

switch_protocol

Same as the switch_protocol command.

Sent when switching to the HTTP/2 or Websocket protocol.

Exports

The following function should be called by modules implementing stream handlers to execute the next stream handler in the list:

cowboy_stream:init(3) - Initialize a stream -
cowboy_stream:data(3) - Handle data for a stream -
cowboy_stream:info(3) - Handle a message for a stream -
cowboy_stream:terminate(3) - Terminate a stream -
cowboy_stream:early_error(3) - Handle an early error for a stream -

Types

commands()

commands() :: [Command]

See the list of commands for details.

fin()

fin() :: fin | nofin

Used in commands and events to indicate that this is the end of the stream.

partial_req()

req() :: #{
-    method  => binary(),               %% case sensitive
-    version => cowboy:http_version() | atom(),
-    scheme  => binary(),               %% lowercase; case insensitive
-    host    => binary(),               %% lowercase; case insensitive
-    port    => inet:port_number(),
-    path    => binary(),               %% case sensitive
-    qs      => binary(),               %% case sensitive
-    headers => cowboy:http_headers(),
-    peer    => {inet:ip_address(), inet:port_number()}
-}

Partial request information received when an early error is detected.

reason()

reason() :: normal | switch_protocol
-    | {internal_error, timeout | {error | exit | throw, any()}, HumanReadable}
-    | {socket_error, closed | atom(), HumanReadable}
-    | {stream_error, Error, HumanReadable}
-    | {connection_error, Error, HumanReadable}
-    | {stop, cow_http2:frame(), HumanReadable}
-
-Error         = atom()
-HumanReadable = atom()

Reason for the stream termination.

resp_command()

resp_command() :: {response, cowboy:http_status(),
-    cowboy:http_headers(), cowboy_req:resp_body()}

See the response command for details.

streamid()

streamid() :: any()

The identifier for this stream.

The identifier is unique over the connection process. It is possible to form a unique identifier node-wide and cluster-wide by wrapping it in a {self(), StreamID} tuple.

Changelog

2.2: The trailers command was introduced. -
2.0: Module introduced. -

cowboy_stream(3)

Name

Description

Callbacks

Commands

inform

response

headers

data

trailers

push

flow

spawn

error_response

switch_protocol

stop

internal_error

Predefined events

EXIT

inform

response

headers

data

trailers

push

switch_protocol

Exports

Types

commands()

fin()

partial_req()

reason()

resp_command()

streamid()

Changelog

See also

- Cowboy - 2.5 - Function Reference - -

Navigation

Version select

Like my work? Donate!