<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE cref SYSTEM "cref.dtd">
<cref>
<header>
<copyright>
<year>2001</year><year>2016</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
</legalnotice>
<title>erl_nif</title>
<prepared>Sverker Eriksson</prepared>
<responsible>Sverker Eriksson</responsible>
<docno>1</docno>
<approved></approved>
<checked></checked>
<date>2009-11-17</date>
<rev>PA1</rev>
<file>erl_nif.xml</file>
</header>
<lib>erl_nif</lib>
<libsummary>API functions for an Erlang NIF library.</libsummary>
<description>
<p>A NIF library contains native implementation of some functions
of an Erlang module. The native implemented functions (NIFs) are
called like any other functions without any difference to the
caller. Each NIF must have an implementation in Erlang that
is invoked if the function is called before the NIF library
is successfully loaded. A typical such stub implementation
is to throw an exception. But it can also be used as a fallback
implementation if the NIF library is not implemented for some
architecture.</p>
<warning>
<marker id="WARNING"/>
<p><em>Use this functionality with extreme care.</em></p>
<p>A native function is executed as a direct extension of the
native code of the VM. Execution is not made in a safe environment.
The VM <em>cannot</em> provide the same services as provided when
executing Erlang code, such as pre-emptive scheduling or memory
protection. If the native function does not behave well, the whole
VM will misbehave.</p>
<list type="bulleted">
<item>
<p>A native function that crash will crash the whole VM.</p>
</item>
<item>
<p>An erroneously implemented native function can cause a VM
internal state inconsistency, which can cause a crash of the VM,
or miscellaneous misbehaviors of the VM at any point after the
call to the native function.</p>
</item>
<item>
<p>A native function doing <seealso marker="#lengthy_work">lengthy
work</seealso> before returning degrades responsiveness of the VM,
and can cause miscellaneous strange behaviors. Such strange
behaviors include, but are not limited to, extreme memory usage,
and bad load balancing between schedulers. Strange behaviors that
can occur because of lengthy work can also vary between Erlang/OTP
releases.</p>
</item>
</list>
</warning>
<p>A minimal example of a NIF library can look as follows:</p>
<code type="none">
/* niftest.c */
#include "erl_nif.h"
static ERL_NIF_TERM hello(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[])
{
return enif_make_string(env, "Hello world!", ERL_NIF_LATIN1);
}
static ErlNifFunc nif_funcs[] =
{
{"hello", 0, hello}
};
ERL_NIF_INIT(niftest,nif_funcs,NULL,NULL,NULL,NULL)</code>
<p>The Erlang module can look as follows:</p>
<code type="none">
-module(niftest).
-export([init/0, hello/0]).
init() ->
erlang:load_nif("./niftest", 0).
hello() ->
"NIF library not loaded".</code>
<p>Compile and test can look as follows (on Linux):</p>
<code type="none">
$> gcc -fPIC -shared -o niftest.so niftest.c -I $ERL_ROOT/usr/include/
$> erl
1> c(niftest).
{ok,niftest}
2> niftest:hello().
"NIF library not loaded"
3> niftest:init().
ok
4> niftest:hello().
"Hello world!"</code>
<p>A better solution for a real module is to take advantage of the new
directive <c>on load</c> (see section
<seealso marker="doc/reference_manual:code_loading#on_load">Running a
Function When a Module is Loaded</seealso> in the Erlang Reference
Manual) to load the NIF library automatically when the module is
loaded.</p>
<note>
<p>A NIF does not have to be exported, it can be local to the module.
However, unused local stub functions will be optimized
away by the compiler, causing loading of the NIF library to fail.</p>
</note>
<p>A loaded NIF library is tied to the Erlang module code version
that loaded it. If the module is upgraded with a new version, the
new Erlang code need to load its own NIF library (or maybe choose not
to). The new code version can, however, choose to load the
same NIF library as the old code if it wants to. Sharing the
dynamic library means that static data defined by the library
is shared as well. To avoid unintentionally shared static
data, each Erlang module code can keep its own private data. This
private data can be set when the NIF library is loaded and
then retrieved by calling <seealso marker="#enif_priv_data">
<c>enif_priv_data</c></seealso>.</p>
<p>A NIF library cannot be loaded explicitly. A library is
automatically unloaded when the module code that it belongs to is purged
by the code server.</p>
</description>
<section>
<title>Functionality</title>
<p>All functions that a NIF library needs to do with Erlang are
performed through the NIF API functions. Functions exist
for the following functionality:</p>
<taglist>
<tag>Read and write Erlang terms</tag>
<item>
<p>Any Erlang terms can be passed to a NIF as function arguments and
be returned as function return values. The terms are of C-type
<seealso marker="#ERL_NIF_TERM"><c>ERL_NIF_TERM</c></seealso> and can
only be read or written using API functions. Most functions to read
the content of a term are prefixed <c>enif_get_</c> and usually return
<c>true</c> (or <c>false</c>) if the term is of the expected type (or
not). The functions to write terms are all prefixed <c>enif_make_</c>
and usually
return the created <c>ERL_NIF_TERM</c>. There are also some functions
to query terms, like <c>enif_is_atom</c>, <c>enif_is_identical</c>,
and <c>enif_compare</c>.</p>
<p>All terms of type <c>ERL_NIF_TERM</c> belong to an environment of
type <seealso marker="#ErlNifEnv"><c>ErlNifEnv</c></seealso>. The
lifetime of a term is controlled by the lifetime of its environment
object. All API functions that read or write terms has the
environment that the term belongs to as the first function
argument.</p>
</item>
<tag>Binaries</tag>
<item>
<p>Terms of type binary are accessed with the help of struct type
<seealso marker="#ErlNifBinary"><c>ErlNifBinary</c></seealso>,
which contains a pointer (<c>data</c>) to the raw binary data and the
length (<c>size</c>) of the data in bytes. Both <c>data</c> and
<c>size</c> are read-only and are only to be written using calls to
API functions. Instances of <c>ErlNifBinary</c> are, however, always
allocated by the user (usually as local variables).</p>
<p>The raw data pointed to by <c>data</c> is only mutable after a call
to <seealso marker="#enif_alloc_binary">
<c>enif_alloc_binary</c></seealso> or
<seealso marker="#enif_realloc_binary">
<c>enif_realloc_binary</c></seealso>. All other functions that
operate on a binary leave the data as read-only.
A mutable binary must in the end either be freed with
<seealso marker="#enif_release_binary">
<c>enif_release_binary</c></seealso>
or made read-only by transferring it to an Erlang term with
<seealso marker="#enif_make_binary"><c>enif_make_binary</c></seealso>.
However, it does not have to occur in the same NIF call. Read-only
binaries do not have to be released.</p>
<p><seealso marker="#enif_make_new_binary">
<c>enif_make_new_binary</c></seealso> can be used as a shortcut to
allocate and return a binary in the same NIF call.</p>
<p>Binaries are sequences of whole bytes. Bitstrings with an arbitrary
bit length have no support yet.</p>
</item>
<tag>Resource objects</tag>
<item>
<p>The use of resource objects is a safe way to return pointers to
native data structures from a NIF. A resource object is
only a block of memory allocated with
<seealso marker="#enif_alloc_resource">
<c>enif_alloc_resource</c></seealso>.
A handle ("safe pointer") to this memory block can then be returned
to Erlang by the use of
<seealso marker="#enif_make_resource">
<c>enif_make_resource</c></seealso>.
The term returned by <c>enif_make_resource</c> is opaque in nature.
It can be stored and passed between processes on the same node, but
the only real end usage is to pass it back as an argument to a NIF.
The NIF can then call <seealso marker="#enif_get_resource">
<c>enif_get_resource</c></seealso> and get back a pointer to the
memory block, which is guaranteed to still be valid. A resource
object is not deallocated until the last handle term
is garbage collected by the VM and the resource is released with
<seealso marker="#enif_release_resource">
<c>enif_release_resource</c></seealso>
(not necessarily in that order).</p>
<p>All resource objects are created as instances of some <em>resource
type</em>. This makes resources from different modules to be
distinguishable. A resource type is created by calling
<seealso marker="#enif_open_resource_type">
<c>enif_open_resource_type</c></seealso> when a library is loaded.
Objects of that resource type can then later be allocated and
<c>enif_get_resource</c> verifies that the resource is of the
expected type. A resource type can have a user-supplied destructor
function, which is automatically called when resources of that type
are released (by either the garbage collector or
<c>enif_release_resource</c>). Resource types are uniquely identified
by a supplied name string and the name of the implementing module.</p>
<marker id="enif_resource_example"/>
<p>The following is a template example of how to create and return a
resource object.</p>
<code type="none">
ERL_NIF_TERM term;
MyStruct* obj = enif_alloc_resource(my_resource_type, sizeof(MyStruct));
/* initialize struct ... */
term = enif_make_resource(env, obj);
if (keep_a_reference_of_our_own) {
/* store 'obj' in static variable, private data or other resource object */
}
else {
enif_release_resource(obj);
/* resource now only owned by "Erlang" */
}
return term;</code>
<p>Notice that once <c>enif_make_resource</c> creates the term to
return to Erlang, the code can choose to either keep its own
native pointer to the allocated struct and release it later, or
release it immediately and rely only on the garbage collector
to deallocate the resource object eventually when it collects
the term.</p>
<p>Another use of resource objects is to create binary terms with
user-defined memory management.
<seealso marker="#enif_make_resource_binary">
<c>enif_make_resource_binary</c></seealso>
creates a binary term that is connected to a resource object. The
destructor of the resource is called when the binary is garbage
collected, at which time the binary data can be released. An example
of this can be a binary term consisting of data from a <c>mmap</c>'ed
file. The destructor can then do <c>munmap</c> to release the memory
region.</p>
<p>Resource types support upgrade in runtime by allowing a loaded NIF
library to take over an already existing resource type and by that
"inherit" all existing objects of that type. The destructor of the
new library is thereafter called for the inherited objects and the
library with the old destructor function can be safely unloaded.
Existing resource objects, of a module that is upgraded, must either
be deleted or taken over by the new NIF library. The unloading of a
library is postponed as long as there exist resource objects with a
destructor function in the library.</p>
</item>
<tag>Threads and concurrency</tag>
<item>
<p>A NIF is thread-safe without any explicit synchronization as
long as it acts as a pure function and only reads the supplied
arguments. When you write to a shared state either through
static variables or <seealso marker="#enif_priv_data">
<c>enif_priv_data</c></seealso>, you need to supply your own explicit
synchronization. This includes terms in process-independent
environments that are shared between threads. Resource objects also
require synchronization if you treat them as mutable.</p>
<p>The library initialization callbacks <c>load</c>, <c>reload</c>, and
<c>upgrade</c> are all thread-safe even for shared state data.</p>
</item>
<tag><marker id="version_management"/>Version Management</tag>
<item>
<p>When a NIF library is built, information about the NIF API version
is compiled into the library. When a NIF library is loaded, the
runtime system verifies that the library is of a compatible version.
<c>erl_nif.h</c> defines the following:</p>
<taglist>
<tag><c>ERL_NIF_MAJOR_VERSION</c></tag>
<item>
<p>Incremented when NIF library incompatible changes are made to the
Erlang runtime system. Normally it suffices to recompile the NIF
library when the <c>ERL_NIF_MAJOR_VERSION</c> has changed, but it
can, under rare circumstances, mean that NIF libraries must be
slightly modified. If so, this will of course be documented.</p>
</item>
<tag><c>ERL_NIF_MINOR_VERSION</c></tag>
<item>
<p>Incremented when new features are added. The runtime system uses
the minor version to determine what features to use.</p>
</item>
</taglist>
<p>The runtime system normally refuses to load a NIF library if
the major versions differ, or if the major versions are equal and
the minor version used by the NIF library is greater than the one
used by the runtime system. Old NIF libraries with lower major
versions are, however, allowed after a bump of the major version
during a transition period of two major releases. Such old NIF
libraries can however fail if deprecated features are used.</p>
</item>
<tag><marker id="time_measurement"/>Time Measurement</tag>
<item>
<p>Support for time measurement in NIF libraries:</p>
<list type="bulleted">
<item><seealso marker="#ErlNifTime">
<c>ErlNifTime</c></seealso></item>
<item><seealso marker="#ErlNifTimeUnit">
<c>ErlNifTimeUnit</c></seealso></item>
<item><seealso marker="#enif_monotonic_time">
<c>enif_monotonic_time()</c></seealso></item>
<item><seealso marker="#enif_time_offset">
<c>enif_time_offset()</c></seealso></item>
<item><seealso marker="#enif_convert_time_unit">
<c>enif_convert_time_unit()</c></seealso></item>
</list>
</item>
<tag><marker id="lengthy_work"/>Long-running NIFs</tag>
<item>
<p>As mentioned in the <seealso marker="#WARNING">warning</seealso> text
at the beginning of this manual page, it is of <em>vital
importance</em> that a native function returns relatively fast. It is
difficult to give an exact maximum amount of time that a native
function is allowed to work, but usually a well-behaving native
function is to return to its caller within 1 millisecond. This can be
achieved using different approaches. If you have full control over the
code to execute in the native function, the best approach is to
divide the work into multiple chunks of work and call the native
function multiple times. This is, however, not always possible, for
example when calling third-party libraries.</p>
<p>The <seealso marker="#enif_consume_timeslice">
<c>enif_consume_timeslice()</c></seealso> function can be used to
inform the runtime system about the length of the NIF call.
It is typically always to be used unless the NIF executes very
fast.</p>
<p>If the NIF call is too lengthy, this must be handled in one of
the following ways to avoid degraded responsiveness, scheduler load
balancing problems, and other strange behaviors:</p>
<taglist>
<tag>Yielding NIF</tag>
<item>
<p>If the functionality of a long-running NIF can be split so that
its work can be achieved through a series of shorter NIF calls,
the application has two options:</p>
<list type="bulleted">
<item>
<p>Make that series of NIF calls from the Erlang level.</p>
</item>
<item>
<p>Call a NIF that first performs a chunk of the work, then
invokes the <seealso marker="#enif_schedule_nif">
<c>enif_schedule_nif</c></seealso> function to schedule
another NIF call to perform the next chunk. The final call
scheduled in this manner can then return the overall
result.</p>
</item>
</list>
<p>Breaking up a long-running function in this manner enables the
VM to regain control between calls to the NIFs.</p>
<p>This approach is always preferred over the other alternatives
described below. This both from a performance perspective and
a system characteristics perspective.</p>
</item>
<tag>Threaded NIF</tag>
<item>
<p>This is accomplished by dispatching the work to another thread
managed by the NIF library, return from the NIF, and wait for
the result. The thread can send the result back to the Erlang
process using <seealso marker="#enif_send">
<c>enif_send</c></seealso>.
Information about thread primitives is provided below.</p>
</item>
<tag><marker id="dirty_nifs"/>Dirty NIF</tag>
<item>
<note>
<p><em>The dirty NIF functionality described here
is experimental</em>. Dirty NIF support is available only when
the emulator is configured with dirty schedulers enabled. This
feature is disabled by default. The Erlang runtime
without SMP support does not support dirty schedulers even when
the dirty scheduler support is enabled. To check at runtime for
the presence of dirty scheduler threads, code can use the
<seealso marker="#enif_system_info">
<c>enif_system_info()</c></seealso> API function.</p>
</note>
<p>A NIF that cannot be split and cannot execute in a millisecond
or less is called a "dirty NIF", as it performs work that the
ordinary schedulers of the Erlang runtime system cannot handle cleanly.
Applications that make use of such functions must indicate to the
runtime that the functions are dirty so they can be handled
specially. This is handled by executing dirty jobs on a separate
set of schedulers called dirty schedulers. A dirty NIF executing
on a dirty scheduler does not have the same duration restriction
as a normal NIF.
</p>
<p>
It is important to classify the dirty job correct. An I/O bound
job should be classified as such, and a CPU bound job should be
classified as such. If you should classify CPU bound jobs
as I/O bound jobs, dirty I/O schedulers might starve ordinary
schedulers. I/O bound jobs are expected to either block waiting
for I/O, and/or spend a limited amount of time moving data.
</p>
<p>
To schedule a dirty NIF for execution, the application has two options:</p>
<list type="bulleted">
<item>
<p>Set the appropriate flags value for the dirty NIF in its
<seealso marker="#ErlNifFunc"> <c>ErlNifFunc</c></seealso>
entry.</p>
</item>
<item>
<p>Call <seealso marker="#enif_schedule_nif">
<c>enif_schedule_nif</c></seealso>, pass to it a pointer
to the dirty NIF to be executed, and indicate with argument
<c>flags</c> whether it expects the operation to be CPU-bound
or I/O-bound.</p>
</item>
</list>
<p>A job that alternates between I/O bound and CPU bound can be
reclassified and rescheduled using <c>enif_schedule_nif</c> so
that it executes on the correct type of dirty scheduler at all
times. For more information see the documentation of the
<c>erl(1)</c> command line arguments
<seealso marker="erl#+SDcpu"><c>+SDcpu</c></seealso>,
and <seealso marker="erl#+SDio"><c>+SDio</c></seealso>.</p>
<p>While a process executes a dirty NIF, some operations that
communicate with it can take a very long time to complete.
Suspend or garbage collection of a process executing a dirty
NIF cannot be done until the dirty NIF has returned. Thus, other
processes waiting for such operations to complete might
have to wait for a very long time. Blocking multi-scheduling, that
is, calling <seealso marker="erlang#system_flag_multi_scheduling">
<c>erlang:system_flag(multi_scheduling, block)</c></seealso>, can
also take a very long time to complete. This becaue all ongoing
dirty operations on all dirty schedulers must complete before
the block operation can complete.</p>
<p>Many operations communicating with a process executing a
dirty NIF can, however, complete while it executes the
dirty NIF. For example, retrieving information about it through
<seealso marker="erlang:process_info/1">
<c>erlang:process_info</c></seealso>, setting its group leader,
register/unregister its name, and so on.</p>
<p>Termination of a process executing a dirty NIF can only be
completed up to a certain point while it executes the dirty NIF.
All Erlang resources, such as its registered name and its ETS
tables, are released. All links and monitors are triggered. The
execution of the NIF is, however, <em>not</em> stopped. The NIF
can safely continue execution, allocate heap memory, and so on,
but it is of course better to stop executing as soon as possible.
The NIF can check whether a current process is alive using
<seealso marker="#enif_is_current_process_alive">
<c>enif_is_current_process_alive</c></seealso>. Communication
using <seealso marker="#enif_send"><c>enif_send</c></seealso> and
<seealso marker="#enif_port_command">
<c>enif_port_command</c></seealso> is also dropped when the
sending process is not alive. Deallocation of certain internal
resources, such as process heap and process control block, is
delayed until the dirty NIF has completed.</p>
</item>
</taglist>
</item>
</taglist>
</section>
<section>
<title>Initialization</title>
<taglist>
<tag><marker id="ERL_NIF_INIT"/><c>ERL_NIF_INIT(MODULE,
ErlNifFunc funcs[], load, reload, upgrade, unload)</c></tag>
<item>
<p>This is the magic macro to initialize a NIF library. It
is to be evaluated in global file scope.</p>
<p><c>MODULE</c> is the name of the Erlang module as an
identifier without string quotations. It is stringified by
the macro.</p>
<p><c>funcs</c> is a static array of function descriptors for
all the implemented NIFs in this library.</p>
<p><c>load</c>, <c>reload</c>, <c>upgrade</c> and <c>unload</c>
are pointers to functions. One of <c>load</c>, <c>reload</c>, or
<c>upgrade</c> is called to initialize the library.
<c>unload</c> is called to release the library. All are
described individually below.</p>
<p>If compiling a NIF for static inclusion through
<c>--enable-static-nifs</c>, you must define <c>STATIC_ERLANG_NIF</c>
before the <c>ERL_NIF_INIT</c> declaration.</p>
</item>
<tag><marker id="load"/><c>int (*load)(ErlNifEnv* env, void** priv_data,
ERL_NIF_TERM load_info)</c></tag>
<item>
<p><c>load</c> is called when the NIF library is loaded
and no previously loaded library exists for this module.</p>
<p><c>*priv_data</c> can be set to point to some private data
that the library needs to keep a state between NIF
calls. <c>enif_priv_data</c> returns this pointer.
<c>*priv_data</c> is initialized to <c>NULL</c> when <c>load</c> is
called.</p>
<p><c>load_info</c> is the second argument to <seealso
marker="erlang#load_nif-2"><c>erlang:load_nif/2</c></seealso>.</p>
<p>The library fails to load if <c>load</c> returns
anything other than <c>0</c>. <c>load</c> can be <c>NULL</c> if
initialization is not needed.</p>
</item>
<tag><marker id="upgrade"/><c>int (*upgrade)(ErlNifEnv* env, void**
priv_data, void** old_priv_data, ERL_NIF_TERM load_info)</c></tag>
<item>
<p><c>upgrade</c> is called when the NIF library is loaded
and there is old code of this module with a loaded NIF library.</p>
<p>Works as <c>load</c>, except that <c>*old_priv_data</c> already
contains the value set by the last call to <c>load</c> or
<c>reload</c> for the old module code. <c>*priv_data</c> is
initialized to <c>NULL</c> when <c>upgrade</c> is called. It is
allowed to write to both <c>*priv_data</c> and
<c>*old_priv_data.</c></p>
<p>The library fails to load if <c>upgrade</c> returns
anything other than <c>0</c> or if <c>upgrade</c> is <c>NULL</c>.</p>
</item>
<tag><marker id="unload"/><c>void (*unload)(ErlNifEnv* env, void*
priv_data)</c></tag>
<item>
<p><c>unload</c> is called when the module code that
the NIF library belongs to is purged as old. New code of the same
module may or may not exist. Notice that <c>unload</c> is not
called for a replaced library as a consequence of <c>reload</c>.</p>
</item>
<tag><marker id="reload"/><c>int (*reload)(ErlNifEnv* env, void**
priv_data, ERL_NIF_TERM load_info)</c></tag>
<item>
<note>
<p><em>The reload mechanism is deprecated.</em> It was only intended
as a development feature. Do not use it as an upgrade method for
live production systems. It can be removed in future releases.
Ensure to pass <c>reload</c> as <c>NULL</c> to
<seealso marker="#ERL_NIF_INIT"><c>ERL_NIF_INIT</c></seealso>
to disable it when not used.</p>
</note>
<p><c>reload</c> is called when the NIF library is loaded and a
previously loaded library already exists for this module code.</p>
<p>Works as <c>load</c>, except that
<c>*priv_data</c> already contains the value set by the
previous call to <c>load</c> or <c>reload</c>.</p>
<p>The library fails to load if <c>reload</c> returns
anything other than <c>0</c> or if <c>reload</c> is <c>NULL</c>.</p>
</item>
</taglist>
</section>
<section>
<title>Data Types</title>
<taglist>
<tag><marker id="ERL_NIF_TERM"/><c>ERL_NIF_TERM</c></tag>
<item>
<p>Variables of type <c>ERL_NIF_TERM</c> can refer to any Erlang term.
This is an opaque type and values of it can only by used either as
arguments to API functions or as return values from NIFs. All
<c>ERL_NIF_TERM</c>s belong to an environment
(<seealso marker="#ErlNifEnv"><c>ErlNifEnv</c></seealso>).
A term cannot be destructed individually, it is valid until its
environment is destructed.</p>
</item>
<tag><marker id="ErlNifEnv"/><c>ErlNifEnv</c></tag>
<item>
<p><c>ErlNifEnv</c> represents an environment that can host Erlang
terms. All terms in an environment are valid as long as the
environment is valid. <c>ErlNifEnv</c> is an opaque type; pointers to
it can only be passed on to API functions. Two types of environments
exist:</p>
<taglist>
<tag>Process-bound environment</tag>
<item>
<p>Passed as the first argument to all NIFs. All function arguments
passed to a NIF belong to that environment. The return value from
a NIF must also be a term belonging to the same environment.</p>
<p>A process-bound environment contains transient information
about the calling Erlang process. The environment is only valid
in the thread where it was supplied as argument until the NIF
returns. It is thus useless and dangerous to store pointers to
process-bound environments between NIF calls.</p>
</item>
<tag>Process-independent environment</tag>
<item>
<p>Created by calling <seealso marker="#enif_alloc_env">
<c>enif_alloc_env</c></seealso>. This environment can be
used to store terms between NIF calls and to send terms with
<seealso marker="#enif_send"><c>enif_send</c></seealso>. A
process-independent environment with all its terms is valid until
you explicitly invalidate it with
<seealso marker="#enif_free_env"><c>enif_free_env</c></seealso>
or <c>enif_send</c>.</p>
</item>
</taglist>
<p>All contained terms of a list/tuple/map must belong to the same
environment as the list/tuple/map itself. Terms can be copied between
environments with
<seealso marker="#enif_make_copy"><c>enif_make_copy</c></seealso>.</p>
</item>
<tag><marker id="ErlNifFunc"/><c>ErlNifFunc</c></tag>
<item>
<code type="none">
typedef struct {
const char* name;
unsigned arity;
ERL_NIF_TERM (*fptr)(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]);
unsigned flags;
} ErlNifFunc;</code>
<p>Describes a NIF by its name, arity, and implementation.</p>
<taglist>
<tag><c>fptr</c></tag>
<item>
<p>A pointer to the function that implements the NIF.</p>
</item>
<tag><c>argv</c></tag>
<item>
<p>Contains the function arguments passed to the NIF.</p>
</item>
<tag><c>argc</c></tag>
<item>
<p>The array length, that is, the function arity. <c>argv[N-1]</c>
thus denotes the Nth argument to the NIF. Notice that the argument
<c>argc</c> allows for the same C function to implement several
Erlang functions with different arity (but probably with the same
name).</p>
</item>
<tag><c>flags</c></tag>
<item>
<p>Is <c>0</c> for a regular NIF (and so its value can be omitted
for statically initialized <c>ErlNifFunc</c> instances).</p>
<p><c>flags</c> can be used to indicate that the NIF is a
<seealso marker="#dirty_nifs">dirty NIF</seealso> that is to be
executed on a dirty scheduler thread.</p>
<p><em>The dirty NIF functionality described here is
experimental.</em> You have to enable support for dirty
schedulers when building OTP to try out the functionality.</p>
<p>If the dirty NIF is expected to be CPU-bound, its <c>flags</c>
field is to be set to <c>ERL_NIF_DIRTY_JOB_CPU_BOUND</c> or
<c>ERL_NIF_DIRTY_JOB_IO_BOUND</c>.</p>
<note>
<p>If one of the <c>ERL_NIF_DIRTY_JOB_*_BOUND</c> flags is set,
and the runtime system has no support for dirty schedulers,
the runtime system refuses to load the NIF library.</p>
</note>
</item>
</taglist>
</item>
<tag><marker id="ErlNifBinary"/><c>ErlNifBinary</c></tag>
<item>
<code type="none">
typedef struct {
unsigned size;
unsigned char* data;
} ErlNifBinary;</code>
<p><c>ErlNifBinary</c> contains transient information about an
inspected binary term. <c>data</c> is a pointer to a buffer
of <c>size</c> bytes with the raw content of the binary.</p>
<p>Notice that <c>ErlNifBinary</c> is a semi-opaque type and you are
only allowed to read fields <c>size</c> and <c>data</c>.</p>
</item>
<tag><marker id="ErlNifBinaryToTerm"/><c>ErlNifBinaryToTerm</c></tag>
<item>
<p>An enumeration of the options that can be specified to
<seealso marker="#enif_binary_to_term">
<c>enif_binary_to_term</c></seealso>.
For default behavior, use value <c>0</c>.</p>
<p>When receiving data from untrusted sources, use option
<c>ERL_NIF_BIN2TERM_SAFE</c>.</p>
</item>
<tag><marker id="ErlNifPid"/><c>ErlNifPid</c></tag>
<item>
<p>A process identifier (pid). In contrast to pid terms (instances of
<c>ERL_NIF_TERM</c>), <c>ErlNifPid</c>s are self-contained and not
bound to any <seealso marker="#ErlNifEnv">environment</seealso>.
<c>ErlNifPid</c> is an opaque type.</p>
</item>
<tag><marker id="ErlNifPort"/><c>ErlNifPort</c></tag>
<item>
<p>A port identifier. In contrast to port ID terms (instances of
<c>ERL_NIF_TERM</c>), <c>ErlNifPort</c>s are self-contained and not
bound to any <seealso marker="#ErlNifEnv">environment</seealso>.
<c>ErlNifPort</c> is an opaque type.</p>
</item>
<tag><marker id="ErlNifResourceType"/><c>ErlNifResourceType</c></tag>
<item>
<p>Each instance of <c>ErlNifResourceType</c> represents a class of
memory-managed resource objects that can be garbage collected.
Each resource type has a unique name and a destructor function that
is called when objects of its type are released.</p>
</item>
<tag><marker id="ErlNifResourceDtor"/><c>ErlNifResourceDtor</c></tag>
<item>
<code type="none">
typedef void ErlNifResourceDtor(ErlNifEnv* env, void* obj);</code>
<p>The function prototype of a resource destructor function.</p>
</item>
<tag><marker id="ErlNifCharEncoding"/><c>ErlNifCharEncoding</c></tag>
<item>
<code type="none">
typedef enum {
ERL_NIF_LATIN1
}ErlNifCharEncoding;</code>
<p>The character encoding used in strings and atoms. The only
supported encoding is <c>ERL_NIF_LATIN1</c> for
ISO Latin-1 (8-bit ASCII).</p>
</item>
<tag><marker id="ErlNifSysInfo"/><c>ErlNifSysInfo</c></tag>
<item>
<p>Used by <seealso marker="#enif_system_info">
<c>enif_system_info</c></seealso> to return information about the
runtime system. Contains the same content as
<seealso marker="erl_driver#ErlDrvSysInfo">
<c>ErlDrvSysInfo</c></seealso>.</p>
</item>
<tag><marker id="ErlNifSInt64"/><c>ErlNifSInt64</c></tag>
<item>
<p>A native signed 64-bit integer type.</p>
</item>
<tag><marker id="ErlNifUInt64"/><c>ErlNifUInt64</c></tag>
<item>
<p>A native unsigned 64-bit integer type.</p>
</item>
<tag><marker id="ErlNifTime"/><c>ErlNifTime</c></tag>
<item>
<p>A signed 64-bit integer type for representation of time.</p>
</item>
<tag><marker id="ErlNifTimeUnit"/><c>ErlNifTimeUnit</c></tag>
<item>
<p>An enumeration of time units supported by the NIF API:</p>
<taglist>
<tag><c>ERL_NIF_SEC</c></tag>
<item>Seconds</item>
<tag><c>ERL_NIF_MSEC</c></tag>
<item>Milliseconds</item>
<tag><c>ERL_NIF_USEC</c></tag>
<item>Microseconds</item>
<tag><c>ERL_NIF_NSEC</c></tag>
<item>Nanoseconds</item>
</taglist>
</item>
<tag><marker id="ErlNifUniqueInteger"/><c>ErlNifUniqueInteger</c></tag>
<item>
<p>An enumeration of the properties that can be requested from
<seealso marker="#enif_make_unique_integer">
<c>enif_unique_integer</c></seealso>.
For default properties, use value <c>0</c>.</p>
<taglist>
<tag><c>ERL_NIF_UNIQUE_POSITIVE</c></tag>
<item>
<p>Return only positive integers.</p>
</item>
<tag><c>ERL_NIF_UNIQUE_MONOTONIC</c></tag>
<item>
<p>Return only <seealso
marker="time_correction#Strictly_Monotonically_Increasing">
strictly monotonically increasing</seealso> integer corresponding
to creation time.</p>
</item>
</taglist>
</item>
</taglist>
</section>
<funcs>
<func>
<name><ret>void *</ret><nametext>enif_alloc(size_t size)</nametext></name>
<fsummary>Allocate dynamic memory.</fsummary>
<desc>
<p>Allocates memory of <c>size</c> bytes.</p>
<p>Returns <c>NULL</c> if the allocation fails.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_alloc_binary(size_t size, ErlNifBinary* bin)</nametext>
</name>
<fsummary>Create a new binary.</fsummary>
<desc>
<p>Allocates a new binary of size <c>size</c> bytes.
Initializes the structure pointed to by <c>bin</c> to
refer to the allocated binary. The binary must either be released by
<seealso marker="#enif_release_binary">
<c>enif_release_binary</c></seealso>
or ownership transferred to an Erlang term with
<seealso marker="#enif_make_binary"><c>enif_make_binary</c></seealso>.
An allocated (and owned) <c>ErlNifBinary</c> can be kept between NIF
calls.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if allocation
fails.</p>
</desc>
</func>
<func>
<name><ret>ErlNifEnv *</ret><nametext>enif_alloc_env()</nametext></name>
<fsummary>Create a new environment.</fsummary>
<desc>
<p>Allocates a new process-independent environment. The environment can
be used to hold terms that are not bound to any process. Such terms
can later be copied to a process environment with
<seealso marker="#enif_make_copy"><c>enif_make_copy</c></seealso> or
be sent to a process as a message with <seealso marker="#enif_send">
<c>enif_send</c></seealso>.</p>
<p>Returns pointer to the new environment.</p>
</desc>
</func>
<func>
<name><ret>void *</ret><nametext>enif_alloc_resource(ErlNifResourceType*
type, unsigned size)</nametext></name>
<fsummary>Allocate a memory-managed resource object.</fsummary>
<desc>
<p>Allocates a memory-managed resource object of type <c>type</c> and
size <c>size</c> bytes.</p>
</desc>
</func>
<func>
<name><ret>size_t</ret><nametext>enif_binary_to_term(ErlNifEnv *env,
const unsigned char* data, size_t size, ERL_NIF_TERM *term,
ErlNifBinaryToTerm opts)</nametext></name>
<fsummary>Create a term from the external format.</fsummary>
<desc>
<p>Creates a term that is the result of decoding the binary data at
<c>data</c>, which must be encoded according to the Erlang external
term format. No more than <c>size</c> bytes are read from <c>data</c>.
Argument <c>opts</c> corresponds to the second argument to
<seealso marker="erlang#binary_to_term-2">
<c>erlang:binary_to_term/2</c></seealso> and must be either <c>0</c>
or <c>ERL_NIF_BIN2TERM_SAFE</c>.</p>
<p>On success, stores the resulting term at <c>*term</c> and returns
the number of bytes read. Returns <c>0</c> if decoding fails or if
<c>opts</c> is invalid.</p>
<p>See also <seealso marker="#ErlNifBinaryToTerm">
<c>ErlNifBinaryToTerm</c></seealso>,
<seealso marker="erlang#binary_to_term-2">
<c>erlang:binary_to_term/2</c></seealso>, and
<seealso marker="#enif_term_to_binary">
<c>enif_term_to_binary</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret><nametext>enif_clear_env(ErlNifEnv* env)</nametext>
</name>
<fsummary>Clear an environment for reuse.</fsummary>
<desc>
<p>Frees all terms in an environment and clears it for reuse.
The environment must have been allocated with
<seealso marker="#enif_alloc_env"><c>enif_alloc_env</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_compare(ERL_NIF_TERM lhs, ERL_NIF_TERM rhs)</nametext>
</name>
<fsummary>Compare two terms.</fsummary>
<desc>
<p>Returns an integer < <c>0</c> if <c>lhs</c> < <c>rhs</c>,
<c>0</c> if <c>lhs</c> = <c>rhs</c>, and > <c>0</c> if
<c>lhs</c> > <c>rhs</c>. Corresponds to the Erlang
operators <c>==</c>, <c>/=</c>, <c>=<</c>, <c><</c>,
<c>>=</c>, and <c>></c> (but <em>not</em> <c>=:=</c> or
<c>=/=</c>).</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_cond_broadcast(ErlNifCond *cnd)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_cond_broadcast">
<c>erl_drv_cond_broadcast</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ErlNifCond *</ret>
<nametext>enif_cond_create(char *name)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_cond_create">
<c>erl_drv_cond_create</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_cond_destroy(ErlNifCond *cnd)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_cond_destroy">
<c>erl_drv_cond_destroy</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_cond_signal(ErlNifCond *cnd)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_cond_signal">
<c>erl_drv_cond_signal</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_cond_wait(ErlNifCond *cnd, ErlNifMutex *mtx)</nametext>
</name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_cond_wait">
<c>erl_drv_cond_wait</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_consume_timeslice(ErlNifEnv *env, int percent)</nametext>
</name>
<fsummary></fsummary>
<desc>
<p>Gives the runtime system a hint about how much CPU time the current
NIF call has consumed since the last hint, or since the start of the
NIF if no previous hint has been specified. The time is specified as a
percent of the timeslice that a process is allowed to execute
Erlang code until it can be suspended to give time for other runnable
processes. The scheduling timeslice is not an exact entity, but can
usually be approximated to about 1 millisecond.</p>
<p>Notice that it is up to the runtime system to determine if and how
to use this information. Implementations on some platforms can use
other means to determine consumed CPU time. Lengthy NIFs should
regardless of this frequently call <c>enif_consume_timeslice</c> to
determine if it is allowed to continue execution.</p>
<p>Argument <c>percent</c> must be an integer between 1 and 100. This
function must only be called from a NIF-calling thread, and argument
<c>env</c> must be the environment of the calling process.</p>
<p>Returns <c>1</c> if the timeslice is exhausted, otherwise <c>0</c>.
If <c>1</c> is returned, the NIF is to return as soon as possible in
order for the process to yield.</p>
<p>This function is provided to better support co-operative scheduling,
improve system responsiveness, and make it easier to prevent
misbehaviors of the VM because of a NIF monopolizing a scheduler
thread. It can be used to divide <seealso marker="#lengthy_work">
length work</seealso> into a number of repeated NIF calls without the
need to create threads.</p>
<p>See also the <seealso marker="#WARNING">warning</seealso> text at
the beginning of this manual page.</p>
</desc>
</func>
<func>
<name><ret>ErlNifTime</ret><nametext>enif_convert_time_unit(ErlNifTime
val, ErlNifTimeUnit from, ErlNifTimeUnit to)</nametext></name>
<fsummary>Convert time unit of a time value.</fsummary>
<desc>
<marker id="enif_convert_time_unit"></marker>
<p>Converts the <c>val</c> value of time unit <c>from</c> to
the corresponding value of time unit <c>to</c>. The result is
rounded using the floor function.</p>
<taglist>
<tag><c>val</c></tag>
<item>Value to convert time unit for.</item>
<tag><c>from</c></tag>
<item>Time unit of <c>val</c>.</item>
<tag><c>to</c></tag>
<item>Time unit of returned value.</item>
</taglist>
<p>Returns <c>ERL_NIF_TIME_ERROR</c> if called with an invalid
time unit argument.</p>
<p>See also <seealso marker="#ErlNifTime"><c>ErlNifTime</c></seealso>
and
<seealso marker="#ErlNifTimeUnit"><c>ErlNifTimeUnit</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_cpu_time(ErlNifEnv *)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Returns the CPU time in the same format as
<seealso marker="erlang#timestamp-0">
<c>erlang:timestamp()</c></seealso>.
The CPU time is the time the current logical CPU has spent executing
since some arbitrary point in the past. If the OS does not support
fetching this value, <c>enif_cpu_time</c> invokes
<seealso marker="#enif_make_badarg">
<c>enif_make_badarg</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_equal_tids(ErlNifTid tid1, ErlNifTid tid2)</nametext>
</name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_equal_tids">
<c>erl_drv_equal_tids</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret><nametext>enif_free(void* ptr)</nametext></name>
<fsummary>Free dynamic memory.</fsummary>
<desc>
<p>Frees memory allocated by
<seealso marker="#enif_alloc"><c>enif_alloc</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_free_env(ErlNifEnv* env)</nametext></name>
<fsummary>Free an environment allocated with enif_alloc_env.</fsummary>
<desc>
<p>Frees an environment allocated with
<seealso marker="#enif_alloc_env"><c>enif_alloc_env</c></seealso>.
All terms created in the environment are freed as well.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_atom(ErlNifEnv* env, ERL_NIF_TERM
term, char* buf, unsigned size, ErlNifCharEncoding encode)</nametext>
</name>
<fsummary>Get the text representation of an atom term.</fsummary>
<desc>
<p>Writes a <c>NULL</c>-terminated string in the buffer pointed to by
<c>buf</c> of size <c>size</c>, consisting of the string
representation of the atom <c>term</c> with encoding
<seealso marker="#ErlNifCharEncoding">encode</seealso>.</p>
<p>Returns the number of bytes written (including terminating
<c>NULL</c> character) or <c>0</c> if <c>term</c> is not an atom with
maximum length of <c>size-1</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_atom_length(ErlNifEnv* env,
ERL_NIF_TERM term, unsigned* len, ErlNifCharEncoding encode)</nametext>
</name>
<fsummary>Get the length of atom <c>term</c>.</fsummary>
<desc>
<p>Sets <c>*len</c> to the length (number of bytes excluding
terminating <c>NULL</c> character) of the atom <c>term</c> with
encoding <c>encode</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is not
an atom.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_double(ErlNifEnv* env,
ERL_NIF_TERM term, double* dp)</nametext></name>
<fsummary>Read a floating-point number term.</fsummary>
<desc>
<p>Sets <c>*dp</c> to the floating-point value of <c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is not
a float.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_int(ErlNifEnv* env, ERL_NIF_TERM
term, int* ip)</nametext></name>
<fsummary>Read an integer term.</fsummary>
<desc>
<p>Sets <c>*ip</c> to the integer value of <c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is not
an integer or is outside the bounds of type <c>int</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_int64(ErlNifEnv* env, ERL_NIF_TERM
term, ErlNifSInt64* ip)</nametext></name>
<fsummary>Read a 64-bit integer term.</fsummary>
<desc>
<p>Sets <c>*ip</c> to the integer value of <c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is not
an integer or is outside the bounds of a signed 64-bit integer.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_local_pid(ErlNifEnv* env,
ERL_NIF_TERM term, ErlNifPid* pid)</nametext></name>
<fsummary>Read a local pid term.</fsummary>
<desc>
<p>If <c>term</c> is the pid of a node local process, this function
initializes the pid variable <c>*pid</c> from it and returns
<c>true</c>. Otherwise returns <c>false</c>. No check is done to see
if the process is alive.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_local_port(ErlNifEnv* env,
ERL_NIF_TERM term, ErlNifPort* port_id)</nametext></name>
<fsummary>Read a local port term.</fsummary>
<desc>
<p>If <c>term</c> identifies a node local port, this function
initializes the port variable <c>*port_id</c> from it and returns
<c>true</c>. Otherwise returns <c>false</c>. No check is done to see
if the port is alive.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_list_cell(ErlNifEnv* env,
ERL_NIF_TERM list, ERL_NIF_TERM* head, ERL_NIF_TERM* tail)</nametext>
</name>
<fsummary>Get head and tail from a list.</fsummary>
<desc>
<p>Sets <c>*head</c> and <c>*tail</c> from list <c>list</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if it is
not a list or the list is empty.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_list_length(ErlNifEnv* env,
ERL_NIF_TERM term, unsigned* len)</nametext></name>
<fsummary>Get the length of list <c>term</c>.</fsummary>
<desc>
<p>Sets <c>*len</c> to the length of list <c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not a proper list.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_long(ErlNifEnv* env, ERL_NIF_TERM
term, long int* ip)</nametext></name>
<fsummary>Read a long integer term.</fsummary>
<desc>
<p>Sets <c>*ip</c> to the long integer value of <c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not an integer or is outside the bounds of type <c>long int</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_map_size(ErlNifEnv* env,
ERL_NIF_TERM term, size_t *size)</nametext></name>
<fsummary>Read the size of a map term.</fsummary>
<desc>
<p>Sets <c>*size</c> to the number of key-value pairs in the map
<c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not a map.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_map_value(ErlNifEnv* env,
ERL_NIF_TERM map, ERL_NIF_TERM key, ERL_NIF_TERM* value)</nametext>
</name>
<fsummary>Get the value of a key in a map.</fsummary>
<desc>
<p>Sets <c>*value</c> to the value associated with <c>key</c> in the
map <c>map</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>map</c> is not
a map or if <c>map</c> does not contain <c>key</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_resource(ErlNifEnv* env,
ERL_NIF_TERM term, ErlNifResourceType* type, void** objp)</nametext>
</name>
<fsummary>Get the pointer to a resource object.</fsummary>
<desc>
<p>Sets <c>*objp</c> to point to the resource object referred to by
<c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not a handle to a resource object of type <c>type</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_string(ErlNifEnv* env,
ERL_NIF_TERM list, char* buf, unsigned size,
ErlNifCharEncoding encode)</nametext></name>
<fsummary>Get a C-string from a list.</fsummary>
<desc>
<p>Writes a <c>NULL</c>-terminated string in the buffer pointed to by
<c>buf</c> with size <c>size</c>, consisting of the characters
in the string <c>list</c>. The characters are written using encoding
<seealso marker="#ErlNifCharEncoding">encode</seealso>.</p>
<p>Returns one of the following:</p>
<list type="bulleted">
<item>The number of bytes written (including terminating <c>NULL</c>
character)</item>
<item><c>-size</c> if the string was truncated because of buffer
space</item>
<item><c>0</c> if <c>list</c> is not a string that can be encoded
with <c>encode</c> or if <c>size</c> was < <c>1</c>.</item>
</list>
<p>The written string is always <c>NULL</c>-terminated, unless buffer
<c>size</c> is < <c>1</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_tuple(ErlNifEnv* env, ERL_NIF_TERM
term, int* arity, const ERL_NIF_TERM** array)</nametext></name>
<fsummary>Inspect the elements of a tuple.</fsummary>
<desc>
<p>If <c>term</c> is a tuple, this function sets <c>*array</c> to point
to an array containing the elements of the tuple, and sets
<c>*arity</c> to the number of elements. Notice that the array
is read-only and <c>(*array)[N-1]</c> is the Nth element of
the tuple. <c>*array</c> is undefined if the arity of the tuple
is zero.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not a tuple.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_uint(ErlNifEnv* env, ERL_NIF_TERM
term, unsigned int* ip)</nametext></name>
<fsummary>Read an unsigned integer term.</fsummary>
<desc>
<p>Sets <c>*ip</c> to the unsigned integer value of <c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not an unsigned integer or is outside the bounds of type
<c>unsigned int</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_uint64(ErlNifEnv* env,
ERL_NIF_TERM term, ErlNifUInt64* ip)</nametext></name>
<fsummary>Read an unsigned 64-bit integer term.</fsummary>
<desc>
<p>Sets <c>*ip</c> to the unsigned integer value of <c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not an unsigned integer or is outside the bounds of an unsigned
64-bit integer.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_get_ulong(ErlNifEnv* env, ERL_NIF_TERM
term, unsigned long* ip)</nametext></name>
<fsummary>Read an unsigned integer term.</fsummary>
<desc>
<p>Sets <c>*ip</c> to the unsigned long integer value of
<c>term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>term</c> is
not an unsigned integer or is outside the bounds of type
<c>unsigned long</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_getenv(const char* key, char* value,
size_t *value_size)</nametext></name>
<fsummary>Get the value of an environment variable.</fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_getenv">
<c>erl_drv_getenv</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_has_pending_exception(ErlNifEnv* env,
ERL_NIF_TERM* reason)</nametext></name>
<fsummary>Check if an exception has been raised.</fsummary>
<desc>
<p>Returns <c>true</c> if a pending exception is associated with the
environment <c>env</c>. If <c>reason</c> is a <c>NULL</c> pointer,
ignore it. Otherwise, if a pending exception associated with
<c>env</c> exists, set <c>ERL_NIF_TERM</c> to which <c>reason</c>
points to the value of the exception's term. For example, if
<seealso marker="#enif_make_badarg">
<c>enif_make_badarg</c></seealso> is called to set a pending
<c>badarg</c> exception, a later call to
<c>enif_has_pending_exception(env, &reason)</c> sets
<c>reason</c> to the atom <c>badarg</c>, then return <c>true</c>.</p>
<p>See also <seealso marker="#enif_make_badarg">
<c>enif_make_badarg</c></seealso> and
<seealso marker="#enif_raise_exception">
<c>enif_raise_exception</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_inspect_binary(ErlNifEnv* env,
ERL_NIF_TERM bin_term, ErlNifBinary* bin)</nametext></name>
<fsummary>Inspect the content of a binary.</fsummary>
<desc>
<p>Initializes the structure pointed to by <c>bin</c> with information
about binary term <c>bin_term</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>bin_term</c>
is not a binary.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_inspect_iolist_as_binary(ErlNifEnv*
env, ERL_NIF_TERM term, ErlNifBinary* bin)</nametext></name>
<fsummary>Inspect the content of an iolist.</fsummary>
<desc>
<p>Initializes the structure pointed to by <c>bin</c> with a
continuous buffer with the same byte content as <c>iolist</c>. As
with <c>inspect_binary</c>, the data pointed to by <c>bin</c> is
transient and does not need to be released.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>iolist</c> is
not an iolist.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_atom(ErlNifEnv* env, ERL_NIF_TERM term)</nametext>
</name>
<fsummary>Determine if a term is an atom.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is an atom.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_binary(ErlNifEnv* env, ERL_NIF_TERM term)</nametext>
</name>
<fsummary>Determine if a term is a binary.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a binary.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_current_process_alive(ErlNifEnv* env)</nametext>
</name>
<fsummary>Determine if currently executing process is alive.</fsummary>
<desc>
<p>Returns <c>true</c> if the currently executing process is currently
alive, otherwise <c>false</c>.</p>
<p>This function can only be used from a NIF-calling thread, and with
an environment corresponding to currently executing processes.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_empty_list(ErlNifEnv* env,
ERL_NIF_TERM term)</nametext></name>
<fsummary>Determine if a term is an empty list.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is an empty list.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_exception(ErlNifEnv* env,
ERL_NIF_TERM term)</nametext></name>
<fsummary>Determine if a term is an exception.</fsummary>
<desc><marker id="enif_is_exception"/>
<p>Return true if <c>term</c> is an exception.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_fun(ErlNifEnv* env, ERL_NIF_TERM
term)</nametext></name>
<fsummary>Determine if a term is a fun.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a fun.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_identical(ERL_NIF_TERM lhs,
ERL_NIF_TERM rhs)</nametext></name>
<fsummary>Erlang operator =:=.</fsummary>
<desc>
<p>Returns <c>true</c> if the two terms are identical. Corresponds to
the Erlang operators <c>=:=</c> and <c>=/=</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_list(ErlNifEnv* env, ERL_NIF_TERM term)</nametext>
</name>
<fsummary>Determine if a term is a list.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a list.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_map(ErlNifEnv* env, ERL_NIF_TERM
term)</nametext></name>
<fsummary>Determine if a term is a map.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a map, otherwise
<c>false</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_number(ErlNifEnv* env, ERL_NIF_TERM
term)</nametext></name>
<fsummary>Determine if a term is a number (integer or float).</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a number.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_pid(ErlNifEnv* env, ERL_NIF_TERM term)</nametext>
</name>
<fsummary>Determine if a term is a pid.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a pid.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_port(ErlNifEnv* env, ERL_NIF_TERM term)</nametext>
</name>
<fsummary>Determine if a term is a port.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a port.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_port_alive(ErlNifEnv* env,
ErlNifPort *port_id)</nametext></name>
<fsummary>Determine if a local port is alive.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>port_id</c> is alive.</p>
<p>This function is only thread-safe when the emulator with SMP support
is used. It can only be used in a non-SMP emulator from a NIF-calling
thread.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_is_process_alive(ErlNifEnv* env,
ErlNifPid *pid)</nametext></name>
<fsummary>Determine if a local process is alive.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>pid</c> is alive.</p>
<p>This function is only thread-safe when the emulator with SMP support
is used. It can only be used in a non-SMP emulator from a NIF-calling
thread.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_ref(ErlNifEnv* env, ERL_NIF_TERM term)</nametext>
</name>
<fsummary>Determine if a term is a reference.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a reference.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_is_tuple(ErlNifEnv* env, ERL_NIF_TERM term)</nametext>
</name>
<fsummary>Determine if a term is a tuple.</fsummary>
<desc>
<p>Returns <c>true</c> if <c>term</c> is a tuple.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_keep_resource(void* obj)</nametext>
</name>
<fsummary>Add a reference to a resource object.</fsummary>
<desc>
<p>Adds a reference to resource object <c>obj</c> obtained from
<seealso marker="#enif_alloc_resource">
<c>enif_alloc_resource</c></seealso>. Each call to
<c>enif_keep_resource</c> for an object must be balanced by a call to
<seealso marker="#enif_release_resource">
<c>enif_release_resource</c></seealso>
before the object is destructed.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_atom(ErlNifEnv* env, const char* name)</nametext>
</name>
<fsummary>Create an atom term.</fsummary>
<desc>
<p>Creates an atom term from the <c>NULL</c>-terminated C-string
<c>name</c> with ISO Latin-1 encoding. If the length of <c>name</c>
exceeds the maximum length allowed for an atom (255 characters),
<c>enif_make_atom</c> invokes <seealso marker="#enif_make_badarg">
<c>enif_make_badarg</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_atom_len(ErlNifEnv* env,
const char* name, size_t len)</nametext></name>
<fsummary>Create an atom term.</fsummary>
<desc>
<p>Create an atom term from the string <c>name</c> with length
<c>len</c>. <c>NULL</c> characters are treated as any other
characters. If <c>len</c> exceeds the maximum length
allowed for an atom (255 characters), <c>enif_make_atom</c> invokes
<seealso marker="#enif_make_badarg">
<c>enif_make_badarg</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_badarg(ErlNifEnv* env)</nametext></name>
<fsummary>Make a badarg exception.</fsummary>
<desc>
<p>Makes a <c>badarg</c> exception to be returned from a NIF, and
associates it with environment <c>env</c>. Once a NIF or any function
it calls invokes <c>enif_make_badarg</c>, the runtime ensures that a
<c>badarg</c> exception is raised when the NIF returns, even if the
NIF attempts to return a non-exception term instead.</p>
<p>The return value from <c>enif_make_badarg</c> can be used only as
the return value from the NIF that invoked it (directly or indirectly)
or be passed to <seealso marker="#enif_is_exception">
<c>enif_is_exception</c></seealso>, but not to any other NIF API
function.</p>
<p>See also <seealso marker="#enif_has_pending_exception">
<c>enif_has_pending_exception</c></seealso> and
<seealso marker="#enif_raise_exception">
<c>enif_raise_exception</c></seealso>.</p>
<note>
<p>Before ERTS 7.0 (Erlang/OTP 18), the return value
from <c>enif_make_badarg</c> had to be returned from the NIF. This
requirement is now lifted as the return value from the NIF is
ignored if <c>enif_make_badarg</c> has been invoked.</p>
</note>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_binary(ErlNifEnv* env, ErlNifBinary* bin)</nametext>
</name>
<fsummary>Make a binary term.</fsummary>
<desc>
<p>Makes a binary term from <c>bin</c>. Any ownership of
the binary data is transferred to the created term and
<c>bin</c> is to be considered read-only for the rest of the NIF
call and then as released.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_copy(ErlNifEnv* dst_env,
ERL_NIF_TERM src_term)</nametext></name>
<fsummary>Make a copy of a term.</fsummary>
<desc>
<p>Makes a copy of term <c>src_term</c>. The copy is created in
environment <c>dst_env</c>. The source term can be located in any
environment.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_double(ErlNifEnv* env, double d)</nametext></name>
<fsummary>Create a floating-point term.</fsummary>
<desc>
<p>Creates a floating-point term from a <c>double</c>. If argument
<c>double</c> is not finite or is NaN, <c>enif_make_double</c>
invokes <seealso marker="#enif_make_badarg">
<c>enif_make_badarg</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_make_existing_atom(ErlNifEnv* env,
const char* name, ERL_NIF_TERM* atom, ErlNifCharEncoding
encode)</nametext></name>
<fsummary>Create an existing atom term.</fsummary>
<desc>
<p>Tries to create the term of an already existing atom from
the <c>NULL</c>-terminated C-string <c>name</c> with encoding
<seealso marker="#ErlNifCharEncoding">encode</seealso>.</p>
<p>If the atom already exists, this function stores the term in
<c>*atom</c> and returns <c>true</c>, otherwise <c>false</c>.
Also returns <c>false</c> if the length of <c>name</c> exceeds the
maximum length allowed for an atom (255 characters).</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_make_existing_atom_len(ErlNifEnv* env,
const char* name, size_t len, ERL_NIF_TERM* atom, ErlNifCharEncoding
encoding)</nametext></name>
<fsummary>Create an existing atom term.</fsummary>
<desc>
<p>Tries to create the term of an already existing atom from the
string <c>name</c> with length <c>len</c> and encoding
<seealso marker="#ErlNifCharEncoding">encode</seealso>. <c>NULL</c>
characters are treated as any other characters.</p>
<p>If the atom already exists, this function stores the term in
<c>*atom</c> and returns <c>true</c>, otherwise <c>false</c>.
Also returns <c>false</c> if <c>len</c> exceeds the maximum length
allowed for an atom (255 characters).</p>
</desc>
</func>
<func><name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_int(ErlNifEnv* env, int i)</nametext></name>
<fsummary>Create an integer term.</fsummary>
<desc>
<p>Creates an integer term.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_int64(ErlNifEnv* env, ErlNifSInt64 i)</nametext>
</name>
<fsummary>Create an integer term.</fsummary>
<desc>
<p>Creates an integer term from a signed 64-bit integer.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_list(ErlNifEnv* env, unsigned cnt, ...)</nametext>
</name>
<fsummary>Create a list term.</fsummary>
<desc>
<p>Creates an ordinary list term of length <c>cnt</c>. Expects
<c>cnt</c> number of arguments (after <c>cnt</c>) of type
<c>ERL_NIF_TERM</c> as the elements of the list.</p>
<p>Returns an empty list if <c>cnt</c> is 0.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_list1(ErlNifEnv* env, ERL_NIF_TERM e1)</nametext>
</name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list2(ErlNifEnv* env,
ERL_NIF_TERM e1, ERL_NIF_TERM e2)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list3(ErlNifEnv* env,
ERL_NIF_TERM e1, ERL_NIF_TERM e2, ERL_NIF_TERM e3)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list4(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e4)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list5(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e5)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list6(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e6)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list7(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e7)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list8(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e8)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list9(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e9)</nametext></name>
<fsummary>Create a list term.</fsummary>
<desc>
<p>Creates an ordinary list term with length indicated by the
function name. Prefer these functions (macros) over the variadic
<c>enif_make_list</c> to get a compile-time error if the number of
arguments does not match.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_list_cell(ErlNifEnv*
env, ERL_NIF_TERM head, ERL_NIF_TERM tail)</nametext></name>
<fsummary>Create a list cell.</fsummary>
<desc>
<p>Creates a list cell <c>[head | tail]</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_list_from_array(ErlNifEnv* env, const ERL_NIF_TERM
arr[], unsigned cnt)</nametext></name>
<fsummary>Create a list term from an array.</fsummary>
<desc>
<p>Creates an ordinary list containing the elements of array <c>arr</c>
of length <c>cnt</c>.</p>
<p>Returns an empty list if <c>cnt</c> is 0.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_long(ErlNifEnv* env, long int i)</nametext></name>
<fsummary>Create an integer term from a long int.</fsummary>
<desc>
<p>Creates an integer term from a <c>long int</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_make_map_put(ErlNifEnv* env,
ERL_NIF_TERM map_in, ERL_NIF_TERM key, ERL_NIF_TERM value,
ERL_NIF_TERM* map_out)</nametext></name>
<fsummary>Insert key-value pair in map.</fsummary>
<desc>
<p>Makes a copy of map <c>map_in</c> and inserts <c>key</c> with
<c>value</c>. If <c>key</c> already exists in <c>map_in</c>, the old
associated value is replaced by <c>value</c>.</p>
<p>If successful, this function sets <c>*map_out</c> to the new map and
returns <c>true</c>. Returns <c>false</c> if <c>map_in</c> is not a
map.</p>
<p>The <c>map_in</c> term must belong to environment <c>env</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_make_map_remove(ErlNifEnv* env,
ERL_NIF_TERM map_in, ERL_NIF_TERM key, ERL_NIF_TERM* map_out)</nametext>
</name>
<fsummary>Remove key from map.</fsummary>
<desc>
<p>If map <c>map_in</c> contains <c>key</c>, this function makes a copy
of <c>map_in</c> in <c>*map_out</c>, and removes <c>key</c> and the
associated value. If map <c>map_in</c> does not contain <c>key</c>,
<c>*map_out</c> is set to <c>map_in</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if <c>map_in</c> is
not a map.</p>
<p>The <c>map_in</c> term must belong to environment <c>env</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_make_map_update(ErlNifEnv* env,
ERL_NIF_TERM map_in, ERL_NIF_TERM key, ERL_NIF_TERM new_value,
ERL_NIF_TERM* map_out)</nametext></name>
<fsummary>Replace value for key in map.</fsummary>
<desc>
<p>Makes a copy of map <c>map_in</c> and replace the old associated
value for <c>key</c> with <c>new_value</c>.</p>
<p>If successful, this function sets <c>*map_out</c> to the new map and
returns <c>true</c>. Returns <c>false</c> if <c>map_in</c> is not a
map or if it does not contain <c>key</c>.</p>
<p>The <c>map_in</c> term must belong to environment <c>env</c>.</p>
</desc>
</func>
<func>
<name><ret>unsigned char *</ret><nametext>enif_make_new_binary(ErlNifEnv*
env, size_t size, ERL_NIF_TERM* termp)</nametext></name>
<fsummary>Allocate and create a new binary term.</fsummary>
<desc>
<p>Allocates a binary of size <c>size</c> bytes and creates an owning
term. The binary data is mutable until the calling NIF returns.
This is a quick way to create a new binary without having to use
<seealso marker="#ErlNifBinary"><c>ErlNifBinary</c></seealso>.
The drawbacks are that the binary cannot be kept between NIF calls
and it cannot be reallocated.</p>
<p>Returns a pointer to the raw binary data and sets
<c>*termp</c> to the binary term.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_new_map(ErlNifEnv* env)</nametext></name>
<fsummary>Make an empty map term.</fsummary>
<desc>
<p>Makes an empty map term.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_pid(ErlNifEnv* env, const ErlNifPid* pid)</nametext>
</name>
<fsummary>Make a pid term.</fsummary>
<desc>
<p>Makes a pid term from <c>*pid</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_ref(ErlNifEnv* env)</nametext></name>
<fsummary>Create a reference.</fsummary>
<desc>
<p>Creates a reference like <seealso marker="erlang#make_ref-0">
<c>erlang:make_ref/0</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_resource(ErlNifEnv* env, void* obj)</nametext>
</name>
<fsummary>Create an opaque handle to a resource object.</fsummary>
<desc>
<p>Creates an opaque handle to a memory-managed resource object
obtained by <seealso marker="#enif_alloc_resource">
<c>enif_alloc_resource</c></seealso>. No ownership transfer is done,
as the resource object still needs to be released by
<seealso marker="#enif_release_resource">
<c>enif_release_resource</c></seealso>. However, notice that the call
to <c>enif_release_resource</c> can occur immediately after obtaining
the term from <c>enif_make_resource</c>, in which case the resource
object is deallocated when the term is garbage collected. For more
details, see the <seealso marker="#enif_resource_example">example of
creating and returning a resource object</seealso> in the User's
Guide.</p>
<p>Notice that the only defined behavior of using a resource term in
an Erlang program is to store it and send it between processes on the
same node. Other operations, such as matching or
<c>term_to_binary</c>, have unpredictable (but harmless) results.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_resource_binary(ErlNifEnv* env, void* obj, const
void* data, size_t size)</nametext></name>
<fsummary>Create a custom binary term.</fsummary>
<desc>
<p>Creates a binary term that is memory-managed by a resource object
<c>obj</c> obtained by <seealso marker="#enif_alloc_resource">
<c>enif_alloc_resource</c></seealso>. The returned binary term
consists of <c>size</c> bytes pointed to by <c>data</c>. This raw
binary data must be kept readable and unchanged until the destructor
of the resource is called. The binary data can be stored external to
the resource object, in which case the destructor is responsible
for releasing the data.</p>
<p>Several binary terms can be managed by the same resource object. The
destructor is not called until the last binary is garbage collected.
This can be useful to return different parts of a larger binary
buffer.</p>
<p>As with <seealso marker="#enif_make_resource">
<c>enif_make_resource</c></seealso>, no ownership transfer is done.
The resource still needs to be released with
<seealso marker="#enif_release_resource">
<c>enif_release_resource</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_make_reverse_list(ErlNifEnv* env, ERL_NIF_TERM list_in,
ERL_NIF_TERM *list_out)</nametext></name>
<fsummary>Create the reverse of a list.</fsummary>
<desc>
<p>Sets <c>*list_out</c> to the reverse list of the list <c>list_in</c>
and returns <c>true</c>, or returns <c>false</c> if <c>list_in</c> is
not a list.</p>
<p>This function is only to be used on short lists, as a copy is
created of the list, which is not released until after the NIF
returns.</p>
<p>The <c>list_in</c> term must belong to environment <c>env</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_string(ErlNifEnv* env,
const char* string, ErlNifCharEncoding encoding)</nametext></name>
<fsummary>Create a string.</fsummary>
<desc>
<p>Creates a list containing the characters of the
<c>NULL</c>-terminated string <c>string</c> with encoding
<seealso marker="#ErlNifCharEncoding">encoding</seealso>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_string_len(ErlNifEnv*
env, const char* string, size_t len, ErlNifCharEncoding
encoding)</nametext></name>
<fsummary>Create a string.</fsummary>
<desc>
<p>Creates a list containing the characters of the string <c>string</c>
with length <c>len</c> and encoding
<seealso marker="#ErlNifCharEncoding">encoding</seealso>.
<c>NULL</c> characters are treated as any other characters.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_sub_binary(ErlNifEnv*
env, ERL_NIF_TERM bin_term, size_t pos, size_t size)</nametext></name>
<fsummary>Make a subbinary term.</fsummary>
<desc>
<p>Makes a subbinary of binary <c>bin_term</c>, starting at
zero-based position <c>pos</c> with a length of <c>size</c> bytes.
<c>bin_term</c> must be a binary or bitstring. <c>pos+size</c> must
be less or equal to the number of whole bytes in <c>bin_term</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple(ErlNifEnv* env,
unsigned cnt, ...)</nametext></name>
<fsummary>Creates a tuple term.</fsummary>
<desc>
<p>Creates a tuple term of arity <c>cnt</c>. Expects <c>cnt</c> number
of arguments (after <c>cnt</c>) of type <c>ERL_NIF_TERM</c> as the
elements of the tuple.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple1(ErlNifEnv* env,
ERL_NIF_TERM e1)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple2(ErlNifEnv* env,
ERL_NIF_TERM e1, ERL_NIF_TERM e2)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple3(ErlNifEnv* env,
ERL_NIF_TERM e1, ERL_NIF_TERM e2, ERL_NIF_TERM e3)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple4(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e4)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple5(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e5)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple6(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e6)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple7(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e7)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple8(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e8)</nametext></name>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_tuple9(ErlNifEnv* env,
ERL_NIF_TERM e1, ..., ERL_NIF_TERM e9)</nametext></name>
<fsummary>Create a tuple term.</fsummary>
<desc>
<p>Creates a tuple term with length indicated by the
function name. Prefer these functions (macros) over the variadic
<c>enif_make_tuple</c> to get a compile-time error if the number of
arguments does not match.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_tuple_from_array(ErlNifEnv* env, const ERL_NIF_TERM
arr[], unsigned cnt)</nametext></name>
<fsummary>Create a tuple term from an array.</fsummary>
<desc>
<p>Creates a tuple containing the elements of array <c>arr</c>
of length <c>cnt</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_uint(ErlNifEnv* env, unsigned int i)</nametext>
</name>
<fsummary>Create an unsigned integer term.</fsummary>
<desc>
<p>Creates an integer term from an <c>unsigned int</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_uint64(ErlNifEnv* env, ErlNifUInt64 i)</nametext>
</name>
<fsummary>Create an unsigned integer term.</fsummary>
<desc>
<p>Creates an integer term from an unsigned 64-bit integer.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_make_ulong(ErlNifEnv* env, unsigned long i)</nametext>
</name>
<fsummary>Create an integer term from an unsigned long int.</fsummary>
<desc>
<p>Creates an integer term from an <c>unsigned long int</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_make_unique_integer(ErlNifEnv
*env, ErlNifUniqueInteger properties)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Returns a unique integer with the same properties as specified by
<seealso marker="erlang#unique_integer-1">
<c>erlang:unique_integer/1</c></seealso>.</p>
<p><c>env</c> is the environment to create the integer in.</p>
<p><c>ERL_NIF_UNIQUE_POSITIVE</c> and <c>ERL_NIF_UNIQUE_MONOTONIC</c>
can be passed as the second argument to change the properties of the
integer returned. They can be combined by OR:ing the two values
together.</p>
<p>See also <seealso marker="#ErlNifUniqueInteger">
<c>ErlNifUniqueInteger</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_map_iterator_create(ErlNifEnv *env,
ERL_NIF_TERM map, ErlNifMapIterator *iter, ErlNifMapIteratorEntry
entry)</nametext></name>
<fsummary>Create a map iterator.</fsummary>
<desc>
<p>Creates an iterator for the map <c>map</c> by initializing the
structure pointed to by <c>iter</c>. Argument <c>entry</c> determines
the start position of the iterator: <c>ERL_NIF_MAP_ITERATOR_FIRST</c>
or <c>ERL_NIF_MAP_ITERATOR_LAST</c>.</p>
<p>Returns <c>true</c> on success, or false if <c>map</c> is not a
map.</p>
<p>A map iterator is only useful during the lifetime of environment
<c>env</c> that the <c>map</c> belongs to. The iterator must be
destroyed by calling <seealso marker="#enif_map_iterator_destroy">
<c>enif_map_iterator_destroy</c></seealso>:</p>
<code type="none">
ERL_NIF_TERM key, value;
ErlNifMapIterator iter;
enif_map_iterator_create(env, my_map, &iter, ERL_NIF_MAP_ITERATOR_FIRST);
while (enif_map_iterator_get_pair(env, &iter, &key, &value)) {
do_something(key,value);
enif_map_iterator_next(env, &iter);
}
enif_map_iterator_destroy(env, &iter);</code>
<note>
<p>The key-value pairs of a map have no defined iteration order.
The only guarantee is that the iteration order of a single map
instance is preserved during the lifetime of the environment that
the map belongs to.</p>
</note>
</desc>
</func>
<func>
<name><ret>void</ret><nametext>enif_map_iterator_destroy(ErlNifEnv *env,
ErlNifMapIterator *iter)</nametext></name>
<fsummary>Destroy a map iterator.</fsummary>
<desc>
<p>Destroys a map iterator created by
<seealso marker="#enif_map_iterator_create">
<c>enif_map_iterator_create</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_map_iterator_get_pair(ErlNifEnv *env,
ErlNifMapIterator *iter, ERL_NIF_TERM *key, ERL_NIF_TERM
*value)</nametext></name>
<fsummary>Get key and value at current map iterator position.</fsummary>
<desc>
<p>Gets key and value terms at the current map iterator position.</p>
<p>On success, sets <c>*key</c> and <c>*value</c> and returns
<c>true</c>. Returns <c>false</c> if the iterator is positioned at
head (before first entry) or tail (beyond last entry).</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_map_iterator_is_head(ErlNifEnv *env,
ErlNifMapIterator *iter)</nametext></name>
<fsummary>Check if map iterator is positioned before first.</fsummary>
<desc>
<p>Returns <c>true</c> if map iterator <c>iter</c> is positioned
before the first entry.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_map_iterator_is_tail(ErlNifEnv *env,
ErlNifMapIterator *iter)</nametext></name>
<fsummary>Check if map iterator is positioned after last.</fsummary>
<desc>
<p>Returns <c>true</c> if map iterator <c>iter</c> is positioned
after the last entry.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_map_iterator_next(ErlNifEnv *env,
ErlNifMapIterator *iter)</nametext></name>
<fsummary>Increment map iterator to point to next entry.</fsummary>
<desc>
<p>Increments map iterator to point to the next key-value entry.</p>
<p>Returns <c>true</c> if the iterator is now positioned at a valid
key-value entry, or <c>false</c> if the iterator is positioned at
the tail (beyond the last entry).</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_map_iterator_prev(ErlNifEnv *env,
ErlNifMapIterator *iter)</nametext></name>
<fsummary>Decrement map iterator to point to previous entry.</fsummary>
<desc>
<p>Decrements map iterator to point to the previous key-value entry.</p>
<p>Returns <c>true</c> if the iterator is now positioned at a valid
key-value entry, or <c>false</c> if the iterator is positioned at
the head (before the first entry).</p>
</desc>
</func>
<func>
<name><ret>ErlNifTime</ret>
<nametext>enif_monotonic_time(ErlNifTimeUnit time_unit)</nametext>
</name>
<fsummary>Get Erlang monotonic time.</fsummary>
<desc>
<marker id="enif_monotonic_time"></marker>
<p>Returns the current
<seealso marker="time_correction#Erlang_Monotonic_Time">
Erlang monotonic time</seealso>. Notice that it is not uncommon with
negative values.</p>
<p><c>time_unit</c> is the time unit of the returned value.</p>
<p>Returns <c>ERL_NIF_TIME_ERROR</c> if called with an invalid time
unit argument, or if called from a thread that is not a scheduler
thread.</p>
<p>See also <seealso marker="#ErlNifTime"><c>ErlNifTime</c></seealso>
and <seealso marker="#ErlNifTimeUnit"><c>ErlNifTimeUnit</c></seealso>.
</p>
</desc>
</func>
<func>
<name><ret>ErlNifMutex *</ret>
<nametext>enif_mutex_create(char *name)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_mutex_create">
<c>erl_drv_mutex_create</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_mutex_destroy(ErlNifMutex *mtx)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_mutex_destroy">
<c>erl_drv_mutex_destroy</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_mutex_lock(ErlNifMutex *mtx)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_mutex_lock">
<c>erl_drv_mutex_lock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_mutex_trylock(ErlNifMutex *mtx)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_mutex_trylock">
<c>erl_drv_mutex_trylock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_mutex_unlock(ErlNifMutex *mtx)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_mutex_unlock">
<c>erl_drv_mutex_unlock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret>
<nametext>enif_now_time(ErlNifEnv *env)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Returns an <seealso marker="erlang#now-0">
<c>erlang:now()</c></seealso> time stamp.</p>
<p><em>This function is deprecated.</em></p>
</desc>
</func>
<func>
<name><ret>ErlNifResourceType *</ret>
<nametext>enif_open_resource_type(ErlNifEnv* env, const char*
module_str, const char* name, ErlNifResourceDtor* dtor,
ErlNifResourceFlags flags, ErlNifResourceFlags* tried)</nametext>
</name>
<fsummary>Create or takeover a resource type.</fsummary>
<desc>
<p>Creates or takes over a resource type identified by the string
<c>name</c> and gives it the destructor function pointed to by
<seealso marker="#ErlNifResourceDtor"><c>dtor</c></seealso>.
Argument <c>flags</c> can have the following values:</p>
<taglist>
<tag><c>ERL_NIF_RT_CREATE</c></tag>
<item>Creates a new resource type that does not already exist.</item>
<tag><c>ERL_NIF_RT_TAKEOVER</c></tag>
<item>Opens an existing resource type and takes over ownership of all
its instances. The supplied destructor <c>dtor</c> is called both
for existing instances and new instances not yet created by the
calling NIF library.</item>
</taglist>
<p>The two flag values can be combined with bitwise OR. The resource
type name is local to the calling module. Argument <c>module_str</c>
is not (yet) used and must be <c>NULL</c>. <c>dtor</c> can be
<c>NULL</c> if no destructor is needed.</p>
<p>On success, the function returns a pointer to the resource type and
<c>*tried</c> is set to either <c>ERL_NIF_RT_CREATE</c> or
<c>ERL_NIF_RT_TAKEOVER</c> to indicate what was done. On failure,
returns <c>NULL</c> and sets <c>*tried</c> to <c>flags</c>.
It is allowed to set <c>tried</c> to <c>NULL</c>.</p>
<p>Notice that <c>enif_open_resource_type</c> is only allowed to be
called in the three callbacks
<seealso marker="#load"><c>load</c></seealso>,
<seealso marker="#reload"><c>reload</c></seealso>, and
<seealso marker="#upgrade"><c>upgrade</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_port_command(ErlNifEnv* env, const
ErlNifPort* to_port, ErlNifEnv *msg_env, ERL_NIF_TERM msg)</nametext>
</name>
<fsummary>Send a port_command to to_port.</fsummary>
<desc>
<p>Works as <seealso marker="erlang#port_command-2">
<c>erlang:port_command/2</c></seealso>,
except that it is always completely asynchronous.</p>
<taglist>
<tag><c>env</c></tag>
<item>The environment of the calling process. Must not be
<c>NULL</c>.</item>
<tag><c>*to_port</c></tag>
<item>The port ID of the receiving port. The port ID is to refer to a
port on the local node.</item>
<tag><c>msg_env</c></tag>
<item>The environment of the message term. Can be a process-independent
environment allocated with <seealso marker="#enif_alloc_env">
<c>enif_alloc_env</c></seealso> or <c>NULL</c>.</item>
<tag><c>msg</c></tag>
<item>The message term to send. The same limitations apply as on the
payload to <seealso marker="erlang#port_command-2">
<c>erlang:port_command/2</c></seealso>.</item>
</taglist>
<p>Using a <c>msg_env</c> of <c>NULL</c> is an optimization, which
groups together calls to <c>enif_alloc_env</c>, <c>enif_make_copy</c>,
<c>enif_port_command</c>, and <c>enif_free_env</c> into one call.
This optimization is only useful when a majority of the terms are to
be copied from <c>env</c> to <c>msg_env</c>.</p>
<p>Returns <c>true</c> if the command is successfully sent. Returns
<c>false</c> if the command fails, for example:</p>
<list type="bulleted">
<item><c>*to_port</c> does not refer to a local port.</item>
<item>The currently executing process (that is, the sender) is not
alive.</item>
<item><c>msg</c> is invalid.</item>
</list>
<p>See also <seealso marker="#enif_get_local_port">
<c>enif_get_local_port</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void *</ret>
<nametext>enif_priv_data(ErlNifEnv* env)</nametext></name>
<fsummary>Get the private data of a NIF library.</fsummary>
<desc>
<p>Returns the pointer to the private data that was set by
<seealso marker="#load"><c>load</c></seealso>,
<seealso marker="#reload"><c>reload</c></seealso>, or
<seealso marker="#upgrade"><c>upgrade</c></seealso>.</p>
<p>Was previously named <c>enif_get_data</c>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_raise_exception(ErlNifEnv*
env, ERL_NIF_TERM reason)</nametext></name>
<fsummary>Raise a NIF error exception.</fsummary>
<desc>
<p>Creates an error exception with the term <c>reason</c> to be
returned from a NIF, and associates it with environment <c>env</c>.
Once a NIF or any function it calls invokes
<c>enif_raise_exception</c>, the runtime ensures that the exception
it creates is raised when the NIF returns, even if the NIF attempts
to return a non-exception term instead.</p>
<p>The return value from <c>enif_raise_exception</c> can only be used
as the return value from the NIF that invoked it (directly or
indirectly) or be passed to <seealso marker="#enif_is_exception">
<c>enif_is_exception</c></seealso>, but not to any other NIF API
function.</p>
<p>See also <seealso marker="#enif_has_pending_exception">
<c>enif_has_pending_exception</c></seealso> and
<seealso marker="#enif_make_badarg">
<c>enif_make_badarg</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_realloc_binary(ErlNifBinary* bin, size_t size)</nametext>
</name>
<fsummary>Change the size of a binary.</fsummary>
<desc>
<p>Changes the size of a binary <c>bin</c>. The source binary
can be read-only, in which case it is left untouched and
a mutable copy is allocated and assigned to <c>*bin</c>.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if memory allocation
failed.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_release_binary(ErlNifBinary* bin)</nametext></name>
<fsummary>Release a binary.</fsummary>
<desc>
<p>Releases a binary obtained from
<seealso marker="#enif_alloc_binary">
<c>enif_alloc_binary</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_release_resource(void* obj)</nametext></name>
<fsummary>Release a resource object.</fsummary>
<desc>
<p>Removes a reference to resource object <c>obj</c>obtained from
<seealso marker="#enif_alloc_resource">
<c>enif_alloc_resource</c></seealso>.
The resource object is destructed when the last reference is removed.
Each call to <c>enif_release_resource</c> must correspond to a
previous call to <c>enif_alloc_resource</c> or
<seealso marker="#enif_keep_resource">
<c>enif_keep_resource</c></seealso>.
References made by <seealso marker="#enif_make_resource">
<c>enif_make_resource</c></seealso>
can only be removed by the garbage collector.</p>
</desc>
</func>
<func>
<name><ret>ErlNifRWLock *</ret>
<nametext>enif_rwlock_create(char *name)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_create">
<c>erl_drv_rwlock_create</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_rwlock_destroy(ErlNifRWLock *rwlck)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_destroy">
<c>erl_drv_rwlock_destroy</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_rwlock_rlock(ErlNifRWLock *rwlck)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_rlock">
<c>erl_drv_rwlock_rlock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_rwlock_runlock(ErlNifRWLock *rwlck)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_runlock">
<c>erl_drv_rwlock_runlock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_rwlock_rwlock(ErlNifRWLock *rwlck)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_rwlock">
<c>erl_drv_rwlock_rwlock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_rwlock_rwunlock(ErlNifRWLock *rwlck)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_rwunlock">
<c>erl_drv_rwlock_rwunlock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_rwlock_tryrlock(ErlNifRWLock *rwlck)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_tryrlock">
<c>erl_drv_rwlock_tryrlock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_rwlock_tryrwlock(ErlNifRWLock *rwlck)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_rwlock_tryrwlock">
<c>erl_drv_rwlock_tryrwlock</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ERL_NIF_TERM</ret><nametext>enif_schedule_nif(ErlNifEnv* env,
const char* fun_name, int flags, ERL_NIF_TERM (*fp)(ErlNifEnv* env, int
argc, const ERL_NIF_TERM argv[]), int argc, const ERL_NIF_TERM
argv[])</nametext></name>
<fsummary>Schedule a NIF for execution.</fsummary>
<desc>
<p>Schedules NIF <c>fp</c> to execute. This function allows an
application to break up long-running work into multiple regular NIF
calls or to schedule a <seealso marker="#dirty_nifs">
dirty NIF</seealso> to execute on a dirty scheduler thread.</p>
<p><em>The dirty NIF functionality described here is
experimental.</em> You have to enable support for dirty
schedulers when building OTP to try out the functionality.</p>
<taglist>
<tag><c>fun_name</c></tag>
<item>
<p>Provides a name for the NIF that is scheduled for execution.
If it cannot be converted to an atom, <c>enif_schedule_nif</c>
returns a <c>badarg</c> exception.</p>
</item>
<tag><c>flags</c></tag>
<item>
<p>Must be set to <c>0</c> for a regular NIF. If the emulator was
built with the experimental dirty scheduler support enabled,
<c>flags</c> can be set to either
<c>ERL_NIF_DIRTY_JOB_CPU_BOUND</c> if the job is expected to be
CPU-bound, or <c>ERL_NIF_DIRTY_JOB_IO_BOUND</c> for
jobs that will be I/O-bound. If dirty scheduler threads are not
available in the emulator, an attempt to schedule such a job
results in a <c>badarg</c> exception.</p>
</item>
<tag><c>argc</c> and <c>argv</c></tag>
<item>
<p>Can either be the originals passed into the calling NIF,
or can be values created by the calling NIF.</p>
</item>
</taglist>
<p>The calling NIF must use the return value of
<c>enif_schedule_nif</c> as its own return value.</p>
<p>Be aware that <c>enif_schedule_nif</c>, as its name implies, only
schedules the NIF for future execution. The calling NIF does not
block waiting for the scheduled NIF to execute and return. This means
that the calling NIF cannot expect to receive the scheduled NIF
return value and use it for further operations.</p>
</desc>
</func>
<func>
<name><ret>ErlNifPid *</ret>
<nametext>enif_self(ErlNifEnv* caller_env, ErlNifPid* pid)</nametext>
</name>
<fsummary>Get the pid of the calling process.</fsummary>
<desc>
<p>Initializes the pid variable <c>*pid</c> to represent the
calling process.</p>
<p>Returns <c>pid</c>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_send(ErlNifEnv* env, ErlNifPid* to_pid,
ErlNifEnv* msg_env, ERL_NIF_TERM msg)</nametext></name>
<fsummary>Send a message to a process.</fsummary>
<desc>
<p>Sends a message to a process.</p>
<taglist>
<tag><c>env</c></tag>
<item>The environment of the calling process. Must be <c>NULL</c>
only if calling from a created thread.</item>
<tag><c>*to_pid</c></tag>
<item>The pid of the receiving process. The pid is to refer to a
process on the local node.</item>
<tag><c>msg_env</c></tag>
<item>The environment of the message term. Must be a
process-independent environment allocated with
<seealso marker="#enif_alloc_env"><c>enif_alloc_env</c></seealso>
or NULL.</item>
<tag><c>msg</c></tag>
<item>The message term to send.</item>
</taglist>
<p>Returns <c>true</c> if the message is successfully sent. Returns
<c>false</c> if the send operation fails, that is:</p>
<list type="bulleted">
<item><c>*to_pid</c> does not refer to an alive local process.</item>
<item>The currently executing process (that is, the sender) is not
alive.</item>
</list>
<p>The message environment <c>msg_env</c> with all its terms (including
<c>msg</c>) is invalidated by a successful call to <c>enif_send</c>.
The environment is to either be freed with
<seealso marker="#enif_free_env">
<c>enif_free_env</c></seealso> of cleared for reuse with
<seealso marker="#enif_clear_env"><c>enif_clear_env</c></seealso>.</p>
<p>If <c>msg_env</c> is set to <c>NULL</c>, the <c>msg</c> term is
copied and the original term and its environemt is still valid after
the call.</p>
<p>This function is only thread-safe when the emulator with SMP support
is used. It can only be used in a non-SMP emulator from a NIF-calling
thread.</p>
<note>
<p>Passing <c>msg_env</c> as <c>NULL</c> is only supported as from
ERTS 8.0 (Erlang/OTP 19).</p>
</note>
</desc>
</func>
<func>
<name><ret>unsigned</ret>
<nametext>enif_sizeof_resource(void* obj)</nametext></name>
<fsummary>Get the byte size of a resource object.</fsummary>
<desc>
<p>Gets the byte size of resource object <c>obj</c> obtained by
<seealso marker="#enif_alloc_resource">
<c>enif_alloc_resource</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_snprintf(char *str, size_t size, const
char *format, ...)</nametext></name>
<fsummary>Format strings and Erlang terms.</fsummary>
<desc>
<p>Similar to <c>snprintf</c> but this format string also accepts
<c>"%T"</c>, which formats Erlang terms.</p>
</desc>
</func>
<func>
<name><ret>void</ret><nametext>enif_system_info(ErlNifSysInfo
*sys_info_ptr, size_t size)</nametext></name>
<fsummary>Get information about the Erlang runtime system.</fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#driver_system_info">
<c>driver_system_info</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret><nametext>enif_term_to_binary(ErlNifEnv *env,
ERL_NIF_TERM term, ErlNifBinary *bin)</nametext></name>
<fsummary>Convert a term to the external format.</fsummary>
<desc>
<p>Allocates a new binary with <seealso marker="#enif_alloc_binary">
<c>enif_alloc_binary</c></seealso> and stores the result of encoding
<c>term</c> according to the Erlang external term format.</p>
<p>Returns <c>true</c> on success, or <c>false</c> if the allocation
fails.</p>
<p>See also <seealso marker="erlang#term_to_binary-1">
<c>erlang:term_to_binary/1</c></seealso> and
<seealso marker="#enif_binary_to_term">
<c>enif_binary_to_term</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_thread_create(char *name,ErlNifTid
*tid,void * (*func)(void *),void *args,ErlNifThreadOpts
*opts)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_thread_create">
<c>erl_drv_thread_create</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_thread_exit(void *resp)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_thread_exit">
<c>erl_drv_thread_exit</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_thread_join(ErlNifTid, void **respp)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_thread_join">
<c>erl_drv_thread_join</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ErlNifThreadOpts *</ret>
<nametext>enif_thread_opts_create(char *name)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_thread_opts_create">
<c>erl_drv_thread_opts_create</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_thread_opts_destroy(ErlNifThreadOpts *opts)</nametext>
</name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_thread_opts_destroy">
<c>erl_drv_thread_opts_destroy</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>ErlNifTid</ret>
<nametext>enif_thread_self(void)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_thread_self">
<c>erl_drv_thread_self</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_thread_type(void)</nametext></name>
<fsummary>Determine type of current thread</fsummary>
<desc>
<p>Determine the type of currently executing thread. A positive value
indicates a scheduler thread while a negative value or zero indicates
another type of thread. Currently the following specific types exist
(which may be extended in the future):</p>
<taglist>
<tag><c>ERL_NIF_THR_UNDEFINED</c></tag>
<item><p>Undefined thread that is not a scheduler thread.</p></item>
<tag><c>ERL_NIF_THR_NORMAL_SCHEDULER</c></tag>
<item><p>A normal scheduler thread.</p></item>
<tag><c>ERL_NIF_THR_DIRTY_CPU_SCHEDULER</c></tag>
<item><p>A dirty CPU scheduler thread.</p></item>
<tag><c>ERL_NIF_THR_DIRTY_IO_SCHEDULER</c></tag>
<item><p>A dirty I/O scheduler thread.</p></item>
</taglist>
</desc>
</func>
<func>
<name><ret>ErlNifTime</ret>
<nametext>enif_time_offset(ErlNifTimeUnit time_unit)</nametext></name>
<fsummary>Get current time offset.</fsummary>
<desc>
<marker id="enif_time_offset"></marker>
<p>Returns the current time offset between
<seealso marker="time_correction#Erlang_Monotonic_Time">
Erlang monotonic time</seealso> and
<seealso marker="time_correction#Erlang_System_Time">
Erlang system time</seealso>
converted into the <c>time_unit</c> passed as argument.</p>
<p><c>time_unit</c> is the time unit of the returned value.</p>
<p>Returns <c>ERL_NIF_TIME_ERROR</c> if called with an invalid
time unit argument or if called from a thread that is not a
scheduler thread.</p>
<p>See also <seealso marker="#ErlNifTime"><c>ErlNifTime</c></seealso>
and
<seealso marker="#ErlNifTimeUnit"><c>ErlNifTimeUnit</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void *</ret>
<nametext>enif_tsd_get(ErlNifTSDKey key)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_tsd_get">
<c>erl_drv_tsd_get</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>int</ret>
<nametext>enif_tsd_key_create(char *name, ErlNifTSDKey *key)</nametext>
</name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_tsd_key_create">
<c>erl_drv_tsd_key_create</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_tsd_key_destroy(ErlNifTSDKey key)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_tsd_key_destroy">
<c>erl_drv_tsd_key_destroy</c></seealso>.</p>
</desc>
</func>
<func>
<name><ret>void</ret>
<nametext>enif_tsd_set(ErlNifTSDKey key, void *data)</nametext></name>
<fsummary></fsummary>
<desc>
<p>Same as <seealso marker="erl_driver#erl_drv_tsd_set">
<c>erl_drv_tsd_set</c></seealso>.</p>
</desc>
</func>
</funcs>
<section>
<title>See Also</title>
<p><seealso marker="erlang#load_nif-2">
<c>erlang:load_nif/2</c></seealso></p>
</section>
</cref>
