<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
<year>2016</year><year>2016</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
</legalnotice>
<title>erl_tracer</title>
<prepared></prepared>
<docno></docno>
<date></date>
<rev></rev>
</header>
<module>erl_tracer</module>
<modulesummary>Erlang Tracer Behaviour</modulesummary>
<description>
<p>A behaviour module for implementing the back end of the erlang
tracing system. The functions in this module will be called whenever
a trace probe is triggered. Both the <c>enabled</c> and <c>trace</c>
functions are called in the context of the entity that triggered the
trace probe.
This means that the overhead by having the tracing enabled will be
greatly effected by how much time is spent in these functions. So do as
little work as possible in these functions.</p>
<note>
<p>All functions in this behaviour have to be implemented as NIF's.
This is a limitation that may the lifted in the future.
There is an <seealso marker="#example">example tracer module nif</seealso>
implementation at the end of this page.</p>
</note>
<warning>
<p>Do not send messages or issue port commands to the <c>Tracee</c>
in any of the callbacks. Doing so is not allowed and can cause all
sorts of strange behaviour, including but not limited to infinite
recursions.</p>
</warning>
</description>
<datatypes>
<datatype>
<name name="trace_tag" />
<desc>
<p>The different trace tags that the tracer will be called with.
Each trace tag is described in greater detail in
<seealso marker="#trace">Module:trace/6</seealso>
</p>
</desc>
</datatype>
<datatype>
<name name="tracee" />
<desc>
<p>The process or port that the trace belongs to.
</p>
</desc>
</datatype>
<datatype>
<name name="trace_opts" />
<desc>
<p>The options for the tracee.
<taglist>
<tag><c>timestamp</c></tag>
<item>If not set to <c>undefined</c>, the tracer has been requested to
include a timestamp.</item>
<tag><c>match_spec_result</c></tag>
<item>If not set to <c>true</c>, the tracer has been requested to
include the output of a match specification that was run.</item>
<tag><c>scheduler_id</c></tag>
<item>Set to a number of the scheduler id is to be included by the tracer.
Otherwise it is set to <c>undefined</c>.</item>
</taglist>
</p>
</desc>
</datatype>
<datatype>
<name name="tracer_state" />
<desc>
<p>
The state which is given when calling
<seealso marker="erlang#trace-3"><c>erlang:trace(PidPortSpec,true,[{tracer,Module,TracerState}])</c></seealso>.
The tracer state is an immutable value that is passed to erl_tracer callbacks and should
contain all the data that is needed to generate the trace event.
</p>
</desc>
</datatype>
</datatypes>
<section>
<title>CALLBACK FUNCTIONS</title>
<p>The following functions
should be exported from a <c>erl_tracer</c> callback module.</p>
</section>
<marker id="enabled"></marker>
<funcs>
<func>
<name>Module:enabled(TraceTag, TracerState, Tracee) -> Result</name>
<fsummary>Check if a trace event should be generated.</fsummary>
<type>
<v>TraceTag = <seealso marker="#type-trace_tag">trace_tag()</seealso> | trace_status</v>
<v>TracerState = term()</v>
<v>Tracee = <seealso marker="#type-tracee">tracee()</seealso></v>
<v>Result = trace | discard | remove</v>
</type>
<desc>
<p>This callback will be called whenever a tracepoint is triggered. It
allows the tracer to decide whether a trace should be generated or not.
This check is made as early as possible in order to limit the amount of
overhead associated with tracing. If <c>trace</c> is returned the
necessary trace data will be created and the trace call-back of the tracer
will be called. If <c>discard</c> is returned, this trace call
will be discarded and no call to trace will be done. If
<c>remove</c> is returned, the VM will attempt to remove this tracer
from the tracee, together with any trace flags set on the tracee.
</p>
<p><c>trace_status</c> is a special type of <c>TraceTag</c> which is used
to check if the tracer should still be active. It is called in multiple
scenarios, but most significantly it is used when tracing is started
using this tracer.</p>
<p>This function may be called multiple times per tracepoint, so it
is important that it is both fast and side effect free.</p>
</desc>
</func>
<marker id="trace"></marker>
<func>
<name>Module:trace(TraceTag, TracerState, Tracee, FirstTraceTerm, SecondTraceTerm, Opts) -> Result</name>
<fsummary>Check if a trace event should be generated.</fsummary>
<type>
<v>TraceTag = <seealso marker="#type-trace_tag">trace_tag()</seealso></v>
<v>TracerState = term()</v>
<v>Tracee = <seealso marker="#type-tracee">tracee()</seealso></v>
<v>FirstTraceTerm = term()</v>
<v>SecondTraceTerm = term() | undefined</v>
<v>Opts = <seealso marker="#type-trace_opts">trace_opts()</seealso></v>
<v>Result = ok</v>
</type>
<desc>
<p>This callback will be called when a tracepoint is triggered and
the <seealso marker="#enabled">Module:enabled/3</seealso>
callback returned <c>trace</c>. In it any side effects needed by
the tracer should be done. The tracepoint payload is located in
the <c>FirstTraceTerm</c> and <c>SecondTraceTerm</c>. The content
of the TraceTerms depends on which <c>TraceTag</c> has been triggered.
The <c>FirstTraceTerm</c> and <c>SecondTraceTerm</c> correspond to the
fourth and fifth slot in the trace tuples described in
<seealso marker="erlang#trace_3_trace_messages">erlang:trace/3</seealso>.
If the tuple only has four elements, <c>SecondTraceTerm</c> will be
<c>undefined</c>.</p>
</desc>
</func>
<func>
<name name="trace">Module:trace(seq_trace, TracerState, Label, SeqTraceInfo, undefined, Opts) -> Result</name>
<fsummary>Check if a sequence trace event should be generated.</fsummary>
<type>
<v>TracerState = term()</v>
<v>Label = term()</v>
<v>SeqTraceInfo = term()</v>
<v>Opts = <seealso marker="#type-trace_opts">trace_opts()</seealso></v>
<v>Result = ok</v>
</type>
<desc>
<p>The <c>TraceTag</c> <c>seq_trace</c> is handled a little bit
differently. There is not <c>Tracee</c> for seq_trace, instead the
<c>Label</c> associated with the seq_trace event is given.
For more info on what <c>Label</c> and <c>SeqTraceInfo</c> can be
see the <seealso marker="kernel:seq_trace">seq_trace</seealso> manual.</p>
</desc>
</func>
</funcs>
<section>
<marker id="example"></marker>
<title>Erl Tracer Module example</title>
<p>In the example below a tracer module with a nif backend sends a message
for each <c>send</c> trace tag containing only the sender and receiver.
Using this tracer module, a much more lightweight message tracer is
used that only records who sent messages to who.</p>
<p>Here is an example session using it on Linux.</p>
<pre>
$ gcc -I erts-8.0/include/ -fPIC -shared -o erl_msg_tracer.so erl_msg_tracer.c
$ erl
Erlang/OTP 19 [DEVELOPMENT] [erts-8.0] [source-ed2b56b] [64-bit] [smp:8:8] [async-threads:10] [hipe] [kernel-poll:false]
Eshell V8.0 (abort with ^G)
1> c(erl_msg_tracer), erl_msg_tracer:load().
ok
2> Tracer = spawn(fun F() -> receive M -> io:format("~p~n",[M]), F() end end).
<0.37.0>
3> erlang:trace(new, true, [send,{tracer, erl_msg_tracer, Tracer}]).
0
{<0.39.0>,<0.27.0>}
4> {ok, D} = file:open("/tmp/tmp.data",[write]).
{trace,#Port<0.486>,<0.40.0>}
{trace,<0.40.0>,<0.21.0>}
{trace,#Port<0.487>,<0.4.0>}
{trace,#Port<0.488>,<0.4.0>}
{trace,#Port<0.489>,<0.4.0>}
{trace,#Port<0.490>,<0.4.0>}
{ok,<0.40.0>}
{trace,<0.41.0>,<0.27.0>}
5>
</pre>
<p>erl_msg_tracer.erl</p>
<pre>
-module(erl_msg_tracer).
-export([enabled/3, trace/6, load/0]).
load() ->
erlang:load_nif("erl_msg_tracer", []).
enabled(_, _, _) ->
error.
trace(_, _, _,_, _, _) ->
error.
</pre>
<p>erl_msg_tracer.c</p>
<pre>
#include "erl_nif.h"
/* NIF interface declarations */
static int load(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info);
static int upgrade(ErlNifEnv* env, void** priv_data, void** old_priv_data, ERL_NIF_TERM load_info);
static void unload(ErlNifEnv* env, void* priv_data);
/* The NIFs: */
static ERL_NIF_TERM enabled(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]);
static ERL_NIF_TERM trace(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]);
static ErlNifFunc nif_funcs[] = {
{"enabled", 3, enabled},
{"trace", 6, trace}
};
ERL_NIF_INIT(erl_msg_tracer, nif_funcs, load, NULL, upgrade, unload)
static int load(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info)
{
*priv_data = NULL;
return 0;
}
static void unload(ErlNifEnv* env, void* priv_data)
{
}
static int upgrade(ErlNifEnv* env, void** priv_data, void** old_priv_data,
ERL_NIF_TERM load_info)
{
if (*old_priv_data != NULL || *priv_data != NULL) {
return -1; /* Don't know how to do that */
}
if (load(env, priv_data, load_info)) {
return -1;
}
return 0;
}
/*
* argv[0]: Trace Tag
* argv[1]: TracerState
* argv[2]: Tracee
*/
static ERL_NIF_TERM enabled(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[])
{
ErlNifPid to_pid;
if (enif_get_local_pid(env, argv[1], &to_pid))
if (!enif_is_process_alive(env, &to_pid))
/* tracer is dead so we should remove this tracepoint */
return enif_make_atom(env, "remove");
/* Only generate trace for when tracer != tracee */
if (enif_is_identical(argv[1], argv[2]))
return enif_make_atom(env, "discard");
/* Only trigger trace messages on 'send' */
if (enif_is_identical(enif_make_atom(env, "send"), argv[0]))
return enif_make_atom(env, "trace");
/* Have to answer trace_status */
if (enif_is_identical(enif_make_atom(env, "trace_status"), argv[0]))
return enif_make_atom(env, "trace");
return enif_make_atom(env, "discard");
}
/*
* argv[0]: Trace Tag, should only be 'send'
* argv[1]: TracerState, process to send {argv[2], argv[4]} to
* argv[2]: Tracee
* argv[3]: Message, ignored
* argv[4]: Recipient
* argv[5]: Options, ignored
*/
static ERL_NIF_TERM trace(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[])
{
ErlNifPid to_pid;
if (enif_get_local_pid(env, argv[1], &to_pid)) {
ERL_NIF_TERM msg = enif_make_tuple3(env, enif_make_atom(env, "trace"), argv[2], argv[4]);
enif_send(env, &to_pid, NULL, msg);
}
return enif_make_atom(env, "ok");
}
</pre>
</section>
</erlref>