%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2018-2018. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
-module(socket).
%% Administrative and "global" utility functions
-export([
on_load/0, on_load/1, on_load/2,
info/0
]).
-export([
open/2, open/3, open/4,
bind/2, bind/3,
connect/3,
listen/1, listen/2,
accept/1, accept/2,
accept4/1, accept4/2, accept4/3,
send/2, send/3, sendto/5,
recv/1, recv/2, recvfrom/1, recvfrom/2,
close/1,
setopt/3,
getopt/2,
formated_timestamp/0
]).
-export_type([
domain/0,
type/0,
protocol/0,
socket/0,
ip_address/0,
ip4_address/0,
ip6_address/0,
port_number/0,
accept_flags/0,
accept_flag/0,
send_flags/0,
send_flag/0
]).
%% We support only a subset of all domains.
-type domain() :: local | inet | inet6.
%% We support only a subset of all types.
-type type() :: stream | dgram | raw | seqpacket.
%% We support only a subset of all protocols:
-type protocol() :: ip | tcp | udp | sctp.
-type ip_address() :: ip4_address() | ip6_address().
-type ip4_address() :: {0..255, 0..255, 0..255, 0..255}.
-type ip6_address() ::
{0..65535,
0..65535,
0..65535,
0..65535,
0..65535,
0..65535,
0..65535,
0..65535}.
-type port_number() :: 0..65535.
-type socket_info() :: map().
%% -record(socket, {info :: socket_info,
%% ref :: reference()}).
-opaque socket() :: {socket, socket_info(), reference()}.
%% -opaque socket() :: #socket{}.
-type accept_flags() :: [accept_flag()].
-type accept_flag() :: nonblock | cloexec.
-type send_flags() :: [send_flag()].
-type send_flag() :: confirm |
dontroute |
dontwait |
eor |
more |
nosignal |
oob.
-type recv_flags() :: [recv_flag()].
-type recv_flag() :: cmsg_cloexec |
dontwait |
errqueue |
oob |
peek |
trunc |
waitall.
-type setopt_key() :: foo.
-type getopt_key() :: foo.
-define(SOCKET_DOMAIN_LOCAL, 1).
-define(SOCKET_DOMAIN_UNIX, ?SOCKET_DOMAIN_LOCAL).
-define(SOCKET_DOMAIN_INET, 2).
-define(SOCKET_DOMAIN_INET6, 3).
-define(SOCKET_TYPE_STREAM, 1).
-define(SOCKET_TYPE_DGRAM, 2).
-define(SOCKET_TYPE_RAW, 3).
%% -define(SOCKET_TYPE_RDM, 4).
-define(SOCKET_TYPE_SEQPACKET, 5).
-define(SOCKET_PROTOCOL_IP, 1).
-define(SOCKET_PROTOCOL_TCP, 2).
-define(SOCKET_PROTOCOL_UDP, 3).
-define(SOCKET_PROTOCOL_SCTP, 4).
-define(SOCKET_LISTEN_BACKLOG_DEFAULT, 5).
%% Bit numbers (from right).
-define(SOCKET_ACCEPT_FLAG_NONBLOCK, 0).
-define(SOCKET_ACCEPT_FLAG_CLOEXEC, 1).
-define(SOCKET_ACCEPT_FLAGS_DEFAULT, []).
-define(SOCKET_SEND_FLAG_CONFIRM, 0).
-define(SOCKET_SEND_FLAG_DONTROUTE, 1).
-define(SOCKET_SEND_FLAG_DONTWAIT, 2).
-define(SOCKET_SEND_FLAG_EOR, 3).
-define(SOCKET_SEND_FLAG_MORE, 4).
-define(SOCKET_SEND_FLAG_NOSIGNAL, 5).
-define(SOCKET_SEND_FLAG_OOB, 6).
-define(SOCKET_SEND_FLAGS_DEFAULT, []).
-define(SOCKET_RECV_FLAG_CMSG_CLOEXEC, 0).
-define(SOCKET_RECV_FLAG_DONTWAIT, 1).
-define(SOCKET_RECV_FLAG_ERRQUEUE, 2).
-define(SOCKET_RECV_FLAG_OOB, 3).
-define(SOCKET_RECV_FLAG_PEEK, 4).
-define(SOCKET_RECV_FLAG_TRUNC, 5).
-define(SOCKET_RECV_FLAG_WAITALL, 6).
-define(SOCKET_RECV_FLAGS_DEFAULT, []).
-define(SOCKET_SETOPT_KEY_DEBUG, 0).
-define(SOCKET_GETOPT_KEY_DEBUG, ?SOCKET_SETOPT_KEY_DEBUG).
%% ===========================================================================
%%
%% Administrative and utility API
%%
%% ===========================================================================
-spec on_load() -> ok.
%% Should we require that the Extra arg is a map?
on_load() ->
on_load(#{}).
-spec on_load(Extra) -> ok when
Extra :: maps:map().
on_load(Extra) when is_map(Extra) ->
on_load(atom_to_list(?MODULE), Extra).
-spec on_load(Path, Extra) -> ok when
Path :: string(),
Extra :: maps:map().
on_load(Path, Extra) when is_list(Path) andalso is_map(Extra) ->
on_load(nif_is_loaded(), Path, Extra).
on_load(true, _Path, _Extra) ->
ok;
on_load(false, Path, Extra) ->
ok = erlang:load_nif(Path, maps:put(timestamp, formated_timestamp(), Extra)).
-spec info() -> list().
info() ->
nif_info().
%% ===========================================================================
%%
%% The proper socket API
%%
%% ===========================================================================
%% ===========================================================================
%%
%% open - create an endpoint for communication
%%
open(Domain, Type) ->
open(Domain, Type, null).
-spec open(Domain, Type, Protocol) -> {ok, Socket} | {error, Reason} when
Domain :: domain(),
Type :: type(),
Protocol :: null | protocol(),
Socket :: socket(),
Reason :: term().
open(Domain, Type, Protocol) ->
open(Domain, Type, Protocol, #{}).
-spec open(Domain, Type, Protocol, Extra) -> {ok, Socket} | {error, Reason} when
Domain :: domain(),
Type :: type(),
Protocol :: null | protocol(),
Extra :: map(),
Socket :: socket(),
Reason :: term().
open(Domain, Type, Protocol0, Extra) when is_map(Extra) ->
try
begin
Protocol = default_protocol(Protocol0, Type),
EDomain = enc_domain(Domain),
EType = enc_type(Domain, Type),
EProtocol = enc_protocol(Type, Protocol),
case nif_open(EDomain, EType, EProtocol, Extra) of
{ok, SockRef} ->
SocketInfo = #{domain => Domain,
type => Type,
protocol => Protocol},
Socket = {socket, SocketInfo, SockRef},
{ok, Socket};
{error, _} = ERROR ->
ERROR
end
end
catch
throw:T ->
T;
error:Reason ->
{error, Reason}
end.
%% Note that this is just a convenience function for when the protocol was
%% not specified. If its actually specied, then that will be selected.
%% Also, this only works for the some of the type's (stream, dgram and
%% seqpacket).
default_protocol(null, stream) -> tcp;
default_protocol(null, dgram) -> udp;
default_protocol(null, seqpacket) -> sctp;
default_protocol(null, Type) -> throw({error, {no_default_protocol, Type}});
default_protocol(Protocol, _) -> Protocol.
%% ===========================================================================
%%
%% bind - bind a name to a socket
%%
-spec bind(Socket, FileOrAddr) -> ok | {error, Reason} when
Socket :: socket(),
FileOrAddr :: binary() | string() | ip_address() | any | loopback,
Reason :: term().
bind(Socket, File) when is_binary(File) ->
if
byte_size(File) =:= 0 ->
{error, einval};
byte_size(File) =< 255 ->
nif_bind(Socket, File);
true ->
{error, einval}
end;
bind(Socket, File) when is_list(File) andalso (File =/= []) ->
Bin = unicode:characters_to_binary(File, file:native_name_encoding()),
if
byte_size(Bin) =< 255 ->
nif_bind(Socket, Bin);
true ->
{error, einval}
end;
bind(Socket, Addr) when is_tuple(Addr) orelse
(Addr =:= any) orelse
(Addr =:= loopback) ->
bind(Socket, Addr, 0).
-spec bind(Socket, Address, Port) -> ok | {ok, NewPort} | {error, Reason} when
Socket :: socket(),
Address :: ip_address() | any | loopback,
Port :: port_number(),
NewPort :: port_number(),
Reason :: term().
%% Shall we keep info about domain so that we can verify address?
bind({socket, _, SockRef}, Addr, Port)
when (is_tuple(Addr) andalso
((size(Addr) =:= 4) orelse (size(Addr) =:= 8))) orelse
((Addr =:= any) orelse (Addr =:= loopback)) andalso
(is_integer(Port) andalso (Port >= 0)) ->
nif_bind(SockRef, {Addr, Port}).
%% ===========================================================================
%%
%% connect - initiate a connection on a socket
%%
-spec connect(Socket, Addr, Port) -> ok | {error, Reason} when
Socket :: socket(),
Addr :: ip_address(),
Port :: port_number(),
Reason :: term().
connect(Socket, Addr, Port) ->
connect(Socket, Addr, Port, infinity).
-spec connect(Socket, Addr, Port, Timeout) -> ok | {error, Reason} when
Socket :: socket(),
Addr :: ip_address(),
Port :: port_number(),
Timeout :: timeout(),
Reason :: term().
connect(_Socket, _Addr, _Port, Timeout)
when (is_integer(Timeout) andalso (Timeout =< 0)) ->
{error, timeout};
connect({socket, _, SockRef}, Addr, Port, Timeout)
when (is_tuple(Addr) andalso
((size(Addr) =:= 4) orelse (size(Addr) =:= 8))) andalso
(is_integer(Port) andalso (Port >= 0)) andalso
((Timeout =:= infinity) orelse is_integer(Timeout)) ->
TS = timestamp(Timeout),
case nif_connect(SockRef, Addr, Port) of
ok ->
%% Connected!
ok;
{ok, Ref} ->
%% Connecting...
NewTimeout = next_timeout(TS, Timeout),
receive
{select, SockRef, Ref, ready_output} ->
nif_finalize_connection(SockRef)
after NewTimeout ->
nif_cancel(SockRef, Ref),
{error, timeout}
end;
{error, _} = ERROR ->
ERROR
end.
%% ===========================================================================
%%
%% listen - listen for connections on a socket
%%
-spec listen(Socket, Backlog) -> ok | {error, Reason} when
Socket :: socket(),
Backlog :: pos_integer(),
Reason :: term().
listen(Socket) ->
listen(Socket, ?SOCKET_LISTEN_BACKLOG_DEFAULT).
listen({socket, _, SockRef}, Backlog)
when (is_integer(Backlog) andalso (Backlog >= 0)) ->
nif_listen(SockRef, Backlog).
%% ===========================================================================
%%
%% accept, accept4 - accept a connection on a socket
%%
-spec accept(LSocket, Timeout) -> {ok, Socket} | {error, Reason} when
LSocket :: socket(),
Timeout :: timeout(),
Socket :: socket(),
Reason :: term().
accept(Socket) ->
accept(Socket, infinity).
%% Do we really need this optimization?
accept(_, Timeout) when is_integer(Timeout) andalso (Timeout < 0) ->
{error, timeout};
accept({socket, _, LSockRef}, Timeout)
when is_integer(Timeout) orelse (Timeout =:= infinity) ->
Ref = make_ref(),
do_accept(LSockRef, Ref, Timeout).
do_accept(_, _Ref, Timeout) when is_integer(Timeout) andalso (Timeout < 0) ->
{error, timeout};
do_accept(LSockRef, Ref, Timeout) ->
TS = timestamp(Timeout),
case nif_accept(LSockRef, Ref) of
{ok, SockRef} ->
Socket = {socket, foo, SockRef},
{ok, Socket};
{error, eagain} ->
receive
{select, LSockRef, Ref, ready_input} ->
do_accept(LSockRef, make_ref(), next_timeout(TS, Timeout))
after Timeout ->
%% Shall we cancel the select? How?
nif_cancel(LSockRef, Ref),
flush_select_msgs(LSockRef, Ref),
{error, timeout}
end
end.
flush_select_msgs(LSRef, Ref) ->
receive
{select, LSRef, Ref, _} ->
flush_select_msgs(LSRef, Ref)
after 0 ->
ok
end.
-spec accept4(LSocket, Flags, Timeout) -> {ok, Socket} | {error, Reason} when
LSocket :: socket(),
Flags :: accept_flags(),
Timeout :: timeout(),
Socket :: socket(),
Reason :: term().
accept4(LSocket) ->
accept4(LSocket, ?SOCKET_ACCEPT_FLAGS_DEFAULT).
accept4(LSocket, Flags) when is_list(Flags) ->
accept4(LSocket, Flags, infinity);
accept4(LSocket, Timeout) ->
accept4(LSocket, ?SOCKET_ACCEPT_FLAGS_DEFAULT, Timeout).
%% Do we really need this optimization?
accept4(_LSocket, _Flags, Timeout) when is_integer(Timeout) andalso (Timeout < 0) ->
{error, timeout};
accept4({socket, _, LSockRef}, Flags, Timeout)
when is_list(Flags) andalso
(is_integer(Timeout) orelse (Timeout =:= infinity)) ->
EFlags = enc_accept_flags(Flags),
Ref = make_ref(),
do_accept4(LSockRef, EFlags, Ref, Timeout).
do_accept4(_, _EFlags, _Ref, Timeout)
when is_integer(Timeout) andalso (Timeout < 0) ->
{error, timeout};
do_accept4(LSockRef, EFlags, Ref, Timeout) ->
TS = timestamp(Timeout),
case nif_accept4(LSockRef, EFlags, Ref) of
{ok, SockRef} ->
Socket = {socket, foo, SockRef},
{ok, Socket};
{error, eagain} ->
receive
{select, LSockRef, Ref, ready_input} ->
do_accept4(LSockRef, EFlags, make_ref(),
next_timeout(TS, Timeout))
after Timeout ->
%% Shall we cancel the select? How?
nif_cancel(LSockRef, Ref),
flush_select_msgs(LSockRef, Ref),
{error, timeout}
end
end.
%% send, sendto, sendmsg - send a message on a socket
-spec send(Socket, Data, Flags) -> ok | {error, Reason} when
Socket :: socket(),
Data :: binary(),
Flags :: send_flags(),
Reason :: term().
send(Socket, Data) ->
send(Socket, Data, ?SOCKET_SEND_FLAGS_DEFAULT).
send({socket, _, SockRef}, Data, Flags)
when is_binary(Data) andalso is_list(Flags) ->
EFlags = enc_send_flags(Flags),
nif_send(SockRef, Data, EFlags).
-spec sendto(Socket, Data, Flags, DestAddr, Port) -> ok | {error, Reason} when
Socket :: socket(),
Data :: binary(),
Flags :: send_flags(),
DestAddr :: ip_address(),
Port :: port_number(),
Reason :: term().
sendto({socket, _, SockRef}, Data, Flags, DestAddr, DestPort)
when is_binary(Data) andalso
is_list(Flags) andalso
(is_tuple(DestAddr) andalso
((size(DestAddr) =:= 4) orelse
(size(DestAddr) =:= 8))) andalso
(is_integer(DestPort) andalso (DestPort >= 0)) ->
EFlags = enc_send_flags(Flags),
nif_sendto(SockRef, Data, EFlags, DestAddr, DestPort).
%% -spec sendmsg(Socket, MsgHdr, Flags) -> ok | {error, Reason} when
%% Socket :: socket(),
%% MsgHdr :: msg_header(),
%% Flags :: send_flags(),
%% Reason :: term().
%% recv, recvfrom, recvmsg - receive a message from a socket
-spec recv(Socket, Flags) -> {ok, Data} | {error, Reason} when
Socket :: socket(),
Flags :: recv_flags(),
Data :: binary(),
Reason :: term().
recv(Socket) ->
recv(Socket, ?SOCKET_RECV_FLAGS_DEFAULT).
%% WE "may" need a timeout option here...
recv({socket, _, SockRef}, Flags) when is_list(Flags) ->
EFlags = enc_recv_flags(Flags),
nif_recv(SockRef, EFlags).
-spec recvfrom(Socket, Flags) -> {ok, Data, SrcAddr, SrcPort} | {error, Reason} when
Socket :: socket(),
Flags :: recv_flags(),
Data :: binary(),
SrcAddr :: ip_address(),
SrcPort :: port_number(),
Reason :: term().
recvfrom(Socket) ->
recvfrom(Socket, ?SOCKET_RECV_FLAGS_DEFAULT).
recvfrom({socket, _, SockRef}, Flags) when is_list(Flags) ->
EFlags = enc_recv_flags(Flags),
nif_recvfrom(SockRef, EFlags).
%% -spec recvmsg(Socket, [out] MsgHdr, Flags) -> {ok, Data} | {error, Reason} when
%% Socket :: socket(),
%% MsgHdr :: msg_header(),
%% Flags :: recv_flags(),
%% Data :: binary(),
%% Reason :: term().
%% close - close a file descriptor
-spec close(Socket) -> ok | {error, Reason} when
Socket :: socket(),
Reason :: term().
close({socket, _, SockRef}) ->
nif_close(SockRef).
%% setopt - manipulate individual properties of a socket
%%
%% What properties are valid depend on what kind of socket it is
%% (domain, type and protocol)
%% If its an "invalid" option (or value), we should not crash but return some
%% useful error...
%%
-spec setopt(Socket, Key, Value) -> ok | {error, Reason} when
Socket :: socket(),
Key :: setopt_key(),
Value :: term(),
Reason :: term().
setopt({socket, Info, SockRef}, Key, Value) ->
try
begin
Domain = maps:get(domain, Info),
Type = maps:get(type, Info),
Protocol = maps:get(protocol, Info),
EKey = enc_setopt_key(Key, Domain, Type, Protocol),
EVal = enc_setopt_value(Key, Value, Domain, Type, Protocol),
nif_setopt(SockRef, EKey, EVal)
end
catch
throw:T ->
T;
error:Reason ->
{error, Reason} % Process more?
end.
%% getopt - retrieve individual properties of a socket
%%
%% What properties are valid depend on what kind of socket it is
%% (domain, type and protocol).
%% If its an "invalid" option, we should not crash but return some
%% useful error...
%%
-spec getopt(Socket, Key) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Key :: getopt_key(),
Value :: term(),
Reason :: term().
getopt({socket, Info, SockRef}, Key) ->
try
begin
Domain = maps:get(domain, Info),
Type = maps:get(type, Info),
Protocol = maps:get(protocol, Info),
EKey = enc_getopt_key(Key, Domain, Type, Protocol),
%% We may need to decode the value (for the same reason
%% we needed to encode the value for setopt).
case nif_getopt(SockRef, EKey) of
{ok, EVal} ->
Val = dec_getopt_value(Key, EVal, Domain, Type, Protocol),
{ok, Val};
{error, _} = ERROR ->
ERROR
end
end
catch
throw:T ->
T;
error:Reason ->
{error, Reason} % Process more?
end.
%% ===========================================================================
%%
%% Encode / decode
%%
%% ===========================================================================
-spec enc_domain(Domain) -> non_neg_integer() when
Domain :: domain().
enc_domain(local) -> ?SOCKET_DOMAIN_LOCAL;
enc_domain(inet) -> ?SOCKET_DOMAIN_INET;
enc_domain(inet6) -> ?SOCKET_DOMAIN_INET6;
enc_domain(Domain) -> throw({error, {invalid_domain, Domain}}).
-spec enc_type(Domain, Type) -> non_neg_integer() when
Domain :: domain(),
Type :: type().
%% What combos are valid?
enc_type(_, stream) -> ?SOCKET_TYPE_STREAM;
enc_type(_, dgram) -> ?SOCKET_TYPE_DGRAM;
enc_type(_, raw) -> ?SOCKET_TYPE_RAW;
enc_type(_, seqpacket) -> ?SOCKET_TYPE_SEQPACKET;
enc_type(_, Type) -> throw({error, {invalid_type, Type}}).
-spec enc_protocol(Type, Protocol) -> non_neg_integer() when
Type :: type(),
Protocol :: protocol().
enc_protocol(dgram, ip) -> ?SOCKET_PROTOCOL_IP;
enc_protocol(stream, tcp) -> ?SOCKET_PROTOCOL_TCP;
enc_protocol(dgram, udp) -> ?SOCKET_PROTOCOL_UDP;
enc_protocol(seqpacket, sctp) -> ?SOCKET_PROTOCOL_SCTP;
enc_protocol(Type, Proto) -> throw({error, {invalid_protocol, {Type, Proto}}}).
-spec enc_accept_flags(Flags) -> non_neg_integer() when
Flags :: accept_flags().
enc_accept_flags(Flags) ->
EFlags = [{nonblock, ?SOCKET_ACCEPT_FLAG_NONBLOCK},
{cloexec, ?SOCKET_ACCEPT_FLAG_CLOEXEC}],
enc_flags(Flags, EFlags).
-spec enc_send_flags(Flags) -> non_neg_integer() when
Flags :: send_flags().
enc_send_flags(Flags) ->
EFlags = [{confirm, ?SOCKET_SEND_FLAG_CONFIRM},
{dontroute, ?SOCKET_SEND_FLAG_DONTROUTE},
{dontwait, ?SOCKET_SEND_FLAG_DONTWAIT},
{eor, ?SOCKET_SEND_FLAG_EOR},
{more, ?SOCKET_SEND_FLAG_MORE},
{nosignal, ?SOCKET_SEND_FLAG_NOSIGNAL},
{oob, ?SOCKET_SEND_FLAG_OOB}],
enc_flags(Flags, EFlags).
-spec enc_recv_flags(Flags) -> non_neg_integer() when
Flags :: recv_flags().
enc_recv_flags(Flags) ->
EFlags = [{cmsg_cloexec, ?SOCKET_RECV_FLAG_CMSG_CLOEXEC},
{dontwait, ?SOCKET_RECV_FLAG_DONTWAIT},
{errqueue, ?SOCKET_RECV_FLAG_ERRQUEUE},
{oob, ?SOCKET_RECV_FLAG_OOB},
{peek, ?SOCKET_RECV_FLAG_PEEK},
{trunc, ?SOCKET_RECV_FLAG_TRUNC},
{waitall, ?SOCKET_RECV_FLAG_WAITALL}],
enc_flags(Flags, EFlags).
enc_flags([], _) ->
0;
enc_flags(Flags, EFlags) ->
F = fun(Flag, Acc) ->
case lists:keysearch(Flag, 1, EFlags) of
{value, {Flag, EFlag}} ->
Acc bor (1 bsl EFlag);
false ->
throw({error, {unknown_flag, Flag}})
end
end,
lists:foldl(F, 0, Flags).
%% We should ...really... do something with the domain, type and protocol args...
enc_setopt_key(debug, _, _, _) ->
?SOCKET_SETOPT_KEY_DEBUG.
%% We should ...really... do something with the domain, type and protocol args...
enc_setopt_value(debug, V, _, _, _) when is_boolean(V) ->
V.
%% We should ...really... do something with the domain, type and protocol args...
enc_getopt_key(debug, _, _, _) ->
?SOCKET_GETOPT_KEY_DEBUG.
%% We should ...really... do something with the domain, type and protocol args...
dec_getopt_value(debug, B, _, _, _) when is_boolean(B) ->
B.
%% ===========================================================================
%%
%% Misc utility functions
%%
%% ===========================================================================
formated_timestamp() ->
format_timestamp(os:timestamp()).
format_timestamp(Now) ->
N2T = fun(N) -> calendar:now_to_local_time(N) end,
format_timestamp(Now, N2T, true).
format_timestamp({_N1, _N2, N3} = N, N2T, true) ->
FormatExtra = ".~.2.0w",
ArgsExtra = [N3 div 10000],
format_timestamp(N, N2T, FormatExtra, ArgsExtra);
format_timestamp({_N1, _N2, _N3} = N, N2T, false) ->
FormatExtra = "",
ArgsExtra = [],
format_timestamp(N, N2T, FormatExtra, ArgsExtra).
format_timestamp(N, N2T, FormatExtra, ArgsExtra) ->
{Date, Time} = N2T(N),
{YYYY,MM,DD} = Date,
{Hour,Min,Sec} = Time,
FormatDate =
io_lib:format("~.4w-~.2.0w-~.2.0w ~.2.0w:~.2.0w:~.2.0w" ++ FormatExtra,
[YYYY, MM, DD, Hour, Min, Sec] ++ ArgsExtra),
lists:flatten(FormatDate).
%% A timestamp in ms
timestamp(infinity) ->
undefined;
timestamp(_) ->
timestamp().
timestamp() ->
{A,B,C} = os:timestamp(),
A*1000000000+B*1000+(C div 1000).
next_timeout(infinity = Timeout, _) ->
Timeout;
next_timeout(Timeout, TS) ->
NewTimeout = Timeout - tdiff(TS, timestamp()),
if
(NewTimeout > 0) ->
NewTimeout;
true ->
0
end.
tdiff(T1, T2) ->
T2 - T1.
%% ===========================================================================
%%
%% Below follows the actual NIF-functions.
%%
%% ===========================================================================
nif_is_loaded() -> false.
nif_info() ->
erlang:error(badarg).
nif_open(_Domain, _Type, _Protocol, _Extra) ->
erlang:error(badarg).
nif_bind(_SRef, _LocalAddr) ->
erlang:error(badarg).
nif_connect(_SRef, _Addr, _Port) ->
erlang:error(badarg).
nif_finalize_connection(_SRef) ->
erlang:error(badarg).
nif_listen(_SRef, _Backlog) ->
erlang:error(badarg).
nif_accept(_SRef, _Ref) ->
erlang:error(badarg).
nif_accept4(_SRef, _Flags, _Ref) ->
erlang:error(badarg).
nif_send(_SRef, _Data, _Flags) ->
erlang:error(badarg).
nif_sendto(_SRef, _Data, _Flags, _Dest, _Port) ->
erlang:error(badarg).
nif_recv(_SRef, _Flags) ->
erlang:error(badarg).
nif_recvfrom(_SRef, _Flags) ->
erlang:error(badarg).
nif_cancel(_SRef, _Ref) ->
erlang:error(badarg).
nif_close(_SRef) ->
erlang:error(badarg).
nif_setopt(_Ref, _Key, _Val) ->
erlang:error(badarg).
nif_getopt(_Ref, _Key) ->
erlang:error(badarg).
