%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2003-2018. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
-module(ct_telnet).
-export([open/1, open/2, open/3, open/4, close/1]).
-export([cmd/2, cmd/3, cmdf/3, cmdf/4, get_data/1,
send/2, send/3, sendf/3, sendf/4,
expect/2, expect/3]).
%% Callbacks
-export([init/3,handle_msg/2,reconnect/2,terminate/2]).
%% Tool internals
-export([silent_teln_expect/6, teln_receive_until_prompt/3,
format_data/2]).
-export([start_gen_log/1, end_gen_log/0, log/3, log/4]).
-define(RECONNS,3).
-define(RECONN_TIMEOUT,5000).
-define(DEFAULT_TIMEOUT,10000).
-define(DEFAULT_PORT,23).
-define(POLL_LIMIT,0).
-define(POLL_INTERVAL,1000).
-include("ct_util.hrl").
-record(state,{host,
port,
teln_pid,
prx,
buffer=[],
prompt=false,
name,
type,
target_mod,
keep_alive,
poll_limit=?POLL_LIMIT,
poll_interval=?POLL_INTERVAL,
extra,
conn_to=?DEFAULT_TIMEOUT,
com_to=?DEFAULT_TIMEOUT,
reconns=?RECONNS,
reconn_int=?RECONN_TIMEOUT,
tcp_nodelay=false}).
open(Name) ->
open(Name,telnet).
open(Name,ConnType) ->
case ct_util:get_key_from_name(Name) of
{ok, unix} -> % unix host
open(Name, ConnType, unix_telnet, Name);
{ok, Key} -> % any other, e.g. interwatch (iw), etc.
open(Name, ConnType, Key, Name);
Error ->
Error
end.
open(KeyOrName,ConnType,TargetMod) ->
open(KeyOrName,ConnType,TargetMod,KeyOrName).
open(KeyOrName,ConnType,TargetMod,Extra) ->
case ct:get_config({KeyOrName,ConnType}) of
undefined ->
log(undefined,open,"Failed: ~tp",[{not_available,KeyOrName}]),
{error,{not_available,KeyOrName,ConnType}};
Addr ->
Addr1 =
case Addr of
{_IP,_Port} ->
Addr;
IP ->
case ct:get_config({KeyOrName,port}) of
undefined -> IP;
P -> {IP,P}
end
end,
KeepAlive =
case ct:get_config({KeyOrName,keep_alive}) of
undefined ->
case ct:get_config({telnet_settings,keep_alive}) of
undefined -> true;
Bool -> Bool
end;
Bool -> Bool
end,
log(undefined,open,"Connecting to ~tp(~tp)",
[KeyOrName,Addr1]),
Reconnect =
case ct:get_config({telnet_settings,reconnection_attempts}) of
0 -> false;
_ -> true
end,
ct_gen_conn:start(full_addr(Addr1,ConnType),
{TargetMod,KeepAlive,Extra},
?MODULE, [{name,KeyOrName},
{reconnect,Reconnect},
{old,true}])
end.
close(Connection) ->
case get_handle(Connection) of
{ok,Pid} ->
log(undefined,close,"Connection closed, handle: ~w",[Pid]),
case ct_gen_conn:stop(Pid) of
{error,{process_down,Pid,_}} ->
{error,already_closed};
Result ->
Result
end;
Error ->
Error
end.
%%%=================================================================
%%% Test suite interface
%%%-----------------------------------------------------------------
cmd(Connection,Cmd) ->
cmd(Connection,Cmd,[]).
cmd(Connection,Cmd,Opts) when is_list(Opts) ->
case check_cmd_opts(Opts) of
ok ->
case get_handle(Connection) of
{ok,Pid} ->
call(Pid,{cmd,Cmd,Opts});
Error ->
Error
end;
Error ->
Error
end;
cmd(Connection,Cmd,Timeout) when is_integer(Timeout); Timeout==default ->
%% This clause is kept for backwards compatibility only
cmd(Connection,Cmd,[{timeout,Timeout}]).
check_cmd_opts([{timeout,Timeout}|Opts]) when is_integer(Timeout);
Timeout==default ->
check_cmd_opts(Opts);
check_cmd_opts([]) ->
ok;
check_cmd_opts(Opts) ->
check_send_opts(Opts).
cmdf(Connection,CmdFormat,Args) ->
cmdf(Connection,CmdFormat,Args,[]).
cmdf(Connection,CmdFormat,Args,Opts) when is_list(Args) ->
Cmd = lists:flatten(io_lib:format(CmdFormat,Args)),
cmd(Connection,Cmd,Opts).
get_data(Connection) ->
case get_handle(Connection) of
{ok,Pid} ->
call(Pid,get_data);
Error ->
Error
end.
send(Connection,Cmd) ->
send(Connection,Cmd,[]).
send(Connection,Cmd,Opts) ->
case check_send_opts(Opts) of
ok ->
case get_handle(Connection) of
{ok,Pid} ->
call(Pid,{send,Cmd,Opts});
Error ->
Error
end;
Error ->
Error
end.
check_send_opts([{newline,Bool}|Opts]) when is_boolean(Bool) ->
check_send_opts(Opts);
check_send_opts([Invalid|_]) ->
{error,{invalid_option,Invalid}};
check_send_opts([]) ->
ok.
sendf(Connection,CmdFormat,Args) when is_list(Args) ->
sendf(Connection,CmdFormat,Args,[]).
sendf(Connection,CmdFormat,Args,Opts) when is_list(Args) ->
Cmd = lists:flatten(io_lib:format(CmdFormat,Args)),
send(Connection,Cmd,Opts).
expect(Connection,Patterns) ->
expect(Connection,Patterns,[]).
expect(Connection,Patterns,Opts) ->
case get_handle(Connection) of
{ok,Pid} ->
case call(Pid,{expect,Patterns,Opts}) of
{error,Reason} when element(1,Reason)==bad_pattern ->
%% Faulty user input - should fail the test case
exit({Reason,{?MODULE,?FUNCTION_NAME,3}});
Other ->
Other
end;
Error ->
Error
end.
%%%=================================================================
%%% Callback functions
init(Name,{Ip,Port,Type},{TargetMod,KeepAlive,Extra}) ->
S0 = case ct:get_config(telnet_settings) of
undefined ->
#state{};
Settings ->
set_telnet_defaults(Settings,#state{})
end,
%% Handle old user versions of TargetMod
_ = code:ensure_loaded(TargetMod),
try
case erlang:function_exported(TargetMod,connect,7) of
true ->
TargetMod:connect(Name,Ip,Port,S0#state.conn_to,
KeepAlive,S0#state.tcp_nodelay,Extra);
false ->
TargetMod:connect(Name,Ip,Port,S0#state.conn_to,
KeepAlive,Extra)
end
of
{ok,TelnPid} ->
put({ct_telnet_pid2name,TelnPid},Name),
S1 = S0#state{host=Ip,
port=Port,
teln_pid=TelnPid,
name=Name,
type=type(Type),
target_mod=TargetMod,
keep_alive=KeepAlive,
extra=Extra,
prx=TargetMod:get_prompt_regexp()},
log(S1,open,
"Opened telnet connection\n"
"IP: ~p\n"
"Port: ~p\n"
"Command timeout: ~p\n"
"Reconnection attempts: ~p\n"
"Reconnection interval: ~p\n"
"Connection timeout: ~p\n"
"Keep alive: ~w\n"
"Poll limit: ~w\n"
"Poll interval: ~w\n"
"TCP nodelay: ~w",
[Ip,Port,S1#state.com_to,S1#state.reconns,
S1#state.reconn_int,S1#state.conn_to,KeepAlive,
S1#state.poll_limit,S1#state.poll_interval,
S1#state.tcp_nodelay]),
{ok,TelnPid,S1};
Error ->
Error
catch
_:Reason ->
{error,Reason}
end.
type(telnet) -> ip;
type(TS) when TS==ts1;TS==ts2 -> ts.
set_telnet_defaults([{connect_timeout,CnTo}|Ss],S) ->
set_telnet_defaults(Ss,S#state{conn_to=CnTo});
set_telnet_defaults([{command_timeout,CmTo}|Ss],S) ->
set_telnet_defaults(Ss,S#state{com_to=CmTo});
set_telnet_defaults([{reconnection_attempts,Rs}|Ss],S) ->
set_telnet_defaults(Ss,S#state{reconns=Rs});
set_telnet_defaults([{reconnection_interval,RInt}|Ss],S) ->
set_telnet_defaults(Ss,S#state{reconn_int=RInt});
set_telnet_defaults([{keep_alive,_}|Ss],S) ->
set_telnet_defaults(Ss,S);
set_telnet_defaults([{poll_limit,PL}|Ss],S) ->
set_telnet_defaults(Ss,S#state{poll_limit=PL});
set_telnet_defaults([{poll_interval,PI}|Ss],S) ->
set_telnet_defaults(Ss,S#state{poll_interval=PI});
set_telnet_defaults([{tcp_nodelay,NoDelay}|Ss],S) ->
set_telnet_defaults(Ss,S#state{tcp_nodelay=NoDelay});
set_telnet_defaults([Unknown|Ss],S) ->
force_log(S,error,
"Bad element in telnet_settings: ~tp",[Unknown]),
set_telnet_defaults(Ss,S);
set_telnet_defaults([],S) ->
S.
handle_msg({cmd,Cmd,Opts},State) ->
start_gen_log(heading(cmd,State#state.name)),
log(State,cmd,"Cmd: ~tp",[Cmd]),
%% whatever is in the buffer from previous operations
%% will be ignored as we go ahead with this telnet cmd
debug_cont_gen_log("Throwing Buffer:",[]),
debug_log_lines(State#state.buffer),
_ = case {State#state.type,State#state.prompt} of
{ts,_} ->
silent_teln_expect(State#state.name,
State#state.teln_pid,
State#state.buffer,
prompt,
State#state.prx,
[{idle_timeout,2000}]);
{ip,false} ->
silent_teln_expect(State#state.name,
State#state.teln_pid,
State#state.buffer,
prompt,
State#state.prx,
[{idle_timeout,200}]);
{ip,true} ->
ok
end,
TO = case proplists:get_value(timeout,Opts,default) of
default -> State#state.com_to;
Timeout -> Timeout
end,
Newline = proplists:get_value(newline,Opts,true),
{Return,NewBuffer,Prompt} =
case teln_cmd(State#state.teln_pid, Cmd, State#state.prx,
Newline, TO) of
{ok,Data,_PromptType,Rest} ->
log(State,recv,"Return: ~tp",[{ok,Data}]),
{{ok,Data},Rest,true};
Error ->
Retry = {retry,{Error,
{State#state.name,
State#state.type},
State#state.teln_pid,
{cmd,Cmd,Opts}}},
log(State,recv,"Return: ~tp",[Error]),
{Retry,[],false}
end,
end_gen_log(),
{Return,State#state{buffer=NewBuffer,prompt=Prompt}};
handle_msg({send,Cmd,Opts},State) ->
start_gen_log(heading(send,State#state.name)),
log(State,send,"Sending: ~tp",[Cmd]),
debug_cont_gen_log("Throwing Buffer:",[]),
debug_log_lines(State#state.buffer),
_ = case {State#state.type,State#state.prompt} of
{ts,_} ->
silent_teln_expect(State#state.name,
State#state.teln_pid,
State#state.buffer,
prompt,
State#state.prx,
[{idle_timeout,2000}]);
{ip,false} ->
silent_teln_expect(State#state.name,
State#state.teln_pid,
State#state.buffer,
prompt,
State#state.prx,
[{idle_timeout,200}]);
{ip,true} ->
ok
end,
Newline = proplists:get_value(newline,Opts,true),
ct_telnet_client:send_data(State#state.teln_pid,Cmd,Newline),
end_gen_log(),
{ok,State#state{buffer=[],prompt=false}};
handle_msg(get_data,State) ->
start_gen_log(heading(get_data,State#state.name)),
log(State,cmd,"Reading data...",[]),
{ok,Data,Buffer} = teln_get_all_data(State,State#state.buffer,[],[],
State#state.poll_limit),
log(State,recv,"Return: ~tp",[{ok,Data}]),
end_gen_log(),
{{ok,Data},State#state{buffer=Buffer}};
handle_msg({expect,Pattern,Opts},State) ->
start_gen_log(heading(expect,State#state.name)),
log(State,expect,"Expect: ~tp\nOpts = ~tp\n",[Pattern,Opts]),
{Return,NewBuffer,Prompt} =
case teln_expect(State#state.name,
State#state.teln_pid,
State#state.buffer,
Pattern,
State#state.prx,
Opts) of
{ok,Data,Rest} ->
P = check_if_prompt_was_reached(Data,[]),
{{ok,Data},Rest,P};
{ok,Data,HaltReason,Rest} ->
force_log(State,expect,"HaltReason: ~tp",[HaltReason]),
P = check_if_prompt_was_reached(Data,HaltReason),
{{ok,Data,HaltReason},Rest,P};
{error,Reason,Rest} ->
force_log(State,expect,"Expect failed\n~tp",[{error,Reason}]),
P = check_if_prompt_was_reached([],Reason),
{{error,Reason},Rest,P};
{error,Reason} ->
force_log(State,expect,"Expect failed\n~tp",[{error,Reason}]),
P = check_if_prompt_was_reached([],Reason),
{{error,Reason},[],P}
end,
end_gen_log(),
Return1 = case Return of
{error,_} -> {retry,{Return,
{State#state.name,
State#state.type},
State#state.teln_pid,
{expect,Pattern,Opts}}};
_ -> Return
end,
{Return1,State#state{buffer=NewBuffer,prompt=Prompt}}.
reconnect({Ip,Port,_Type},State) ->
reconnect(Ip,Port,State#state.reconns,State).
reconnect(Ip,Port,N,State=#state{name=Name,
target_mod=TargetMod,
keep_alive=KeepAlive,
extra=Extra,
conn_to=ConnTo,
reconn_int=ReconnInt,
tcp_nodelay=NoDelay}) ->
%% Handle old user versions of TargetMod
ConnResult =
case erlang:function_exported(TargetMod,connect,7) of
true ->
TargetMod:connect(Name,Ip,Port,ConnTo,KeepAlive,NoDelay,Extra);
false ->
TargetMod:connect(Name,Ip,Port,ConnTo,KeepAlive,Extra)
end,
case ConnResult of
{ok,NewPid} ->
put({ct_telnet_pid2name,NewPid},Name),
{ok, NewPid, State#state{teln_pid=NewPid}};
Error when N==0 ->
Error;
_Error ->
log(State,reconnect,"Reconnect failed!","Retries left: ~w",[N]),
timer:sleep(ReconnInt),
reconnect(Ip,Port,N-1,State)
end.
terminate(TelnPid,State) ->
Result = ct_telnet_client:close(TelnPid),
log(State,close,"Telnet connection for ~w closed.",[TelnPid]),
Result.
%%%=================================================================
%%% Internal function
get_handle(Pid) when is_pid(Pid) ->
{ok,Pid};
get_handle({Name,Type}) when Type==telnet;Type==ts1;Type==ts2 ->
case ct_util:get_connection(Name,?MODULE) of
{ok,Conn} ->
case get_handle(Type,Conn) of
{ok,Pid} ->
{ok,Pid};
_Error ->
case ct_util:get_key_from_name(Name) of
{ok,node} ->
open(Name,Type,ct_telnet_cello_node);
{ok,unix} -> % unix host
open(Name,Type,unix_telnet,Name);
{ok,Key} -> % any other, e.g. interwatch (iw)
open(Name,Type,Key,Name);
Error ->
Error
end
end;
Error ->
Error
end;
get_handle(Name) ->
get_handle({Name,telnet}).
get_handle(Type,{Pid,{_,_,Type}}) ->
{ok,Pid};
get_handle(Type,_) ->
{error,{no_such_connection,Type}}.
full_addr({Ip,Port},Type) ->
{Ip,Port,Type};
full_addr(Ip,Type) ->
{Ip,?DEFAULT_PORT,Type}.
call(Pid,Msg) ->
ct_gen_conn:call(Pid,Msg).
check_if_prompt_was_reached({prompt,_},_) ->
true;
check_if_prompt_was_reached(_,{prompt,_}) ->
true;
check_if_prompt_was_reached(Data,_) when is_list(Data) ->
lists:keymember(prompt,1,Data);
check_if_prompt_was_reached(_,_) ->
false.
%%%-----------------------------------------------------------------
%%% Functions for logging ct_telnet reports and telnet data
heading(Action,undefined) ->
io_lib:format("~w ~w",[?MODULE,Action]);
heading(Action,Name) ->
io_lib:format("~w ~w for ~tp",[?MODULE,Action,Name]).
force_log(State,Action,String,Args) ->
log(State,Action,String,Args,true).
%%%-----------------------------------------------------------------
log(State,Action,String,Args) when is_record(State, state) ->
log(State,Action,String,Args,false);
log(Name,Action,String,Args) when is_atom(Name) ->
log(#state{name=Name},Action,String,Args,false);
log(TelnPid,Action,String,Args) when is_pid(TelnPid) ->
log(#state{teln_pid=TelnPid},Action,String,Args,false).
%%%-----------------------------------------------------------------
log(undefined,String,Args) ->
log(#state{},undefined,String,Args,false);
log(Name,String,Args) when is_atom(Name) ->
log(#state{name=Name},undefined,String,Args,false);
log(TelnPid,String,Args) when is_pid(TelnPid) ->
log(#state{teln_pid=TelnPid},undefined,String,Args).
%%%-----------------------------------------------------------------
log(#state{name=Name,teln_pid=TelnPid,host=Host,port=Port},
Action,String,Args,ForcePrint) ->
Name1 = if Name == undefined -> get({ct_telnet_pid2name,TelnPid});
true -> Name
end,
Silent = get(silent),
if Action == general_io ->
case ct_util:get_testdata({cth_conn_log,?MODULE}) of
HookMode when HookMode /= undefined, HookMode /= silent,
Silent /= true ->
error_logger:info_report(#conn_log{header=false,
client=self(),
conn_pid=TelnPid,
address={Host,Port},
name=Name1,
action=Action,
module=?MODULE},
{String,Args});
_ -> %% hook inactive or silence requested
ok
end;
true ->
if Action == open; Action == close; Action == reconnect;
Action == info; Action == error ->
ct_gen_conn:log(heading(Action,Name1),String,Args);
ForcePrint == false ->
case ct_util:is_silenced(telnet) of
true ->
ok;
false ->
ct_gen_conn:cont_log_no_timestamp(String,Args)
end;
ForcePrint == true ->
case ct_util:is_silenced(telnet) of
true ->
%% call log/3 now instead of cont_log/2 since
%% start_gen_log/1 will not have been previously
%% called
ct_gen_conn:log(heading(Action,Name1),String,Args);
false ->
ct_gen_conn:cont_log_no_timestamp(String,Args)
end
end
end.
%%%-----------------------------------------------------------------
start_gen_log(Heading) ->
%% check if output is suppressed
case ct_util:is_silenced(telnet) of
true -> ok;
false -> ct_gen_conn:start_log(Heading)
end.
%%%-----------------------------------------------------------------
end_gen_log() ->
%% check if output is suppressed
case ct_util:is_silenced(telnet) of
true -> ok;
false -> ct_gen_conn:end_log()
end.
%% Debug printouts.
debug_cont_gen_log(Str,Args) ->
Old = put(silent,true),
ct_gen_conn:cont_log(Str,Args),
put(silent,Old).
%% Log callback - called from the error handler process
format_data(_How,{String,Args}) ->
io_lib:format(String,Args).
%%%=================================================================
%%% Abstraction layer on top of ct_telnet_client.erl
teln_cmd(Pid,Cmd,Prx,Newline,Timeout) ->
ct_telnet_client:send_data(Pid,Cmd,Newline),
teln_receive_until_prompt(Pid,Prx,Timeout).
teln_get_all_data(State=#state{teln_pid=Pid,prx=Prx},Data,Acc,LastLine,Polls) ->
case check_for_prompt(Prx,LastLine++Data) of
{prompt,Lines,_PromptType,Rest} ->
teln_get_all_data(State,Rest,[Lines|Acc],[],State#state.poll_limit);
{noprompt,Lines,LastLine1} ->
case ct_telnet_client:get_data(Pid) of
{ok,[]} when LastLine1 /= [], Polls > 0 ->
%% No more data from server but the last string is not
%% a complete line (maybe because of a slow connection),
timer:sleep(State#state.poll_interval),
NewPolls = if Polls == infinity -> infinity;
true -> Polls-1
end,
teln_get_all_data(State,[],[Lines|Acc],LastLine1,NewPolls);
{ok,[]} ->
{ok,lists:reverse(lists:append([Lines|Acc])),LastLine1};
{ok,Data1} ->
teln_get_all_data(State,Data1,[Lines|Acc],LastLine1,
State#state.poll_limit)
end
end.
%% Expect options record
-record(eo,{teln_pid,
prx,
idle_timeout,
total_timeout,
haltpatterns=[],
seq=false,
repeat=false,
found_prompt=false,
prompt_check=true}).
%% Externally the silent_teln_expect function shall only be used
%% by the TargetModule, i.e. the target specific module which
%% implements connect/2 and get_prompt_regexp/0.
silent_teln_expect(Name,Pid,Data,Pattern,Prx,Opts) ->
Old = put(silent,true),
Result = teln_expect(Name,Pid,Data,Pattern,Prx,Opts),
put(silent,Old),
Result.
%% teln_expect/6
%%
%% This function implements the expect functionality over telnet. In
%% general there are three possible ways to go:
%% 1) Single: One or more patterns are given, and the function return
%% when one of the patterns are matched.
%% 2) Sequence: Several patterns are given, and they are matched in
%% the order they appear in the pattern list.
%% 3a) Repeat (single): 1) is repeated either N times or until a halt
%% condition is fulfilled.
%% 3b) Repeat (sequence): 2) is repeated either N times or until a
%% halt condition is fulfilled.
teln_expect(Name,Pid,Data,Pattern0,Prx,Opts) ->
HaltPatterns0 =
case get_ignore_prompt(Opts) of
true ->
get_haltpatterns(Opts);
false ->
[prompt | get_haltpatterns(Opts)]
end,
case convert_pattern(HaltPatterns0,false) of
{ok,HaltPatterns} ->
{WaitForPrompt,Pattern1,Opts1} = wait_for_prompt(Pattern0,Opts),
Seq = get_seq(Opts1),
case convert_pattern(Pattern1,Seq) of
{ok,Pattern2} ->
{IdleTimeout,TotalTimeout} = get_timeouts(Opts1),
PromptCheck = get_prompt_check(Opts1),
EO = #eo{teln_pid=Pid,
prx=Prx,
idle_timeout=IdleTimeout,
total_timeout=TotalTimeout,
seq=Seq,
haltpatterns=HaltPatterns,
prompt_check=PromptCheck},
case get_repeat(Opts1) of
false ->
case teln_expect1(Name,Pid,Data,Pattern2,[],EO) of
{ok,Matched,Rest} when WaitForPrompt ->
case lists:reverse(Matched) of
[{prompt,_},Matched1] ->
{ok,Matched1,Rest};
[{prompt,_}|Matched1] ->
{ok,lists:reverse(Matched1),Rest}
end;
{ok,Matched,Rest} ->
{ok,Matched,Rest};
{halt,Why,Rest} ->
{error,Why,Rest};
{error,Reason} ->
{error,Reason}
end;
N ->
EO1 = EO#eo{repeat=N},
repeat_expect(Name,Pid,Data,Pattern2,[],EO1)
end;
Error ->
Error
end;
Error ->
Error
end.
convert_pattern(Pattern0,Seq)
when Pattern0==[] orelse (is_list(Pattern0) and not is_integer(hd(Pattern0))) ->
Pattern =
case Seq of
true -> Pattern0;
false -> rm_dupl(Pattern0,[])
end,
compile_pattern(Pattern,[]);
convert_pattern(Pattern,_Seq) ->
compile_pattern([Pattern],[]).
rm_dupl([P|Ps],Acc) ->
case lists:member(P,Acc) of
true ->
rm_dupl(Ps,Acc);
false ->
rm_dupl(Ps,[P|Acc])
end;
rm_dupl([],Acc) ->
lists:reverse(Acc).
compile_pattern([prompt|Patterns],Acc) ->
compile_pattern(Patterns,[prompt|Acc]);
compile_pattern([{prompt,_}=P|Patterns],Acc) ->
compile_pattern(Patterns,[P|Acc]);
compile_pattern([{Tag,Pattern}|Patterns],Acc) ->
try re:compile(Pattern,[unicode]) of
{ok,MP} -> compile_pattern(Patterns,[{Tag,MP}|Acc]);
{error,Error} -> {error,{bad_pattern,{Tag,Pattern},Error}}
catch error:badarg -> {error,{bad_pattern,{Tag,Pattern}}}
end;
compile_pattern([Pattern|Patterns],Acc) ->
try re:compile(Pattern,[unicode]) of
{ok,MP} -> compile_pattern(Patterns,[MP|Acc]);
{error,Error} -> {error,{bad_pattern,Pattern,Error}}
catch error:badarg -> {error,{bad_pattern,Pattern}}
end;
compile_pattern([],Acc) ->
{ok,lists:reverse(Acc)}.
get_timeouts(Opts) ->
{case lists:keysearch(idle_timeout,1,Opts) of
{value,{_,T}} ->
T;
false ->
%% this check is for backwards compatibility (pre CT v1.8)
case lists:keysearch(timeout,1,Opts) of
{value,{_,T}} -> T;
false -> ?DEFAULT_TIMEOUT
end
end,
case lists:keysearch(total_timeout,1,Opts) of
{value,{_,T}} -> T;
false -> infinity
end}.
get_repeat(Opts) ->
case lists:keysearch(repeat,1,Opts) of
{value,{repeat,N}} when is_integer(N) ->
N;
false ->
case lists:member(repeat,Opts) of
true ->
-1;
false ->
false
end
end.
get_seq(Opts) ->
lists:member(sequence,Opts).
get_haltpatterns(Opts) ->
case lists:keysearch(halt,1,Opts) of
{value,{halt,HaltPatterns}} ->
HaltPatterns;
false ->
[]
end.
get_ignore_prompt(Opts) ->
lists:member(ignore_prompt,Opts).
get_prompt_check(Opts) ->
not lists:member(no_prompt_check,Opts).
wait_for_prompt(Pattern, Opts) ->
case lists:member(wait_for_prompt, Opts) of
true ->
wait_for_prompt1(prompt, Pattern,
lists:delete(wait_for_prompt,Opts));
false ->
case proplists:get_value(wait_for_prompt, Opts) of
undefined ->
{false,Pattern,Opts};
PromptStr ->
wait_for_prompt1({prompt,PromptStr}, Pattern,
proplists:delete(wait_for_prompt,Opts))
end
end.
wait_for_prompt1(Prompt, [Ch|_] = Pattern, Opts) when is_integer(Ch) ->
wait_for_prompt2(Prompt, [Pattern], Opts);
wait_for_prompt1(Prompt, Pattern, Opts) when is_list(Pattern) ->
wait_for_prompt2(Prompt, Pattern, Opts);
wait_for_prompt1(Prompt, Pattern, Opts) ->
wait_for_prompt2(Prompt, [Pattern], Opts).
wait_for_prompt2(Prompt, Pattern, Opts) ->
Pattern1 = case lists:reverse(Pattern) of
[prompt|_] -> Pattern;
[{prompt,_}|_] -> Pattern;
_ -> Pattern ++ [Prompt]
end,
Opts1 = case lists:member(sequence, Opts) of
true -> Opts;
false -> [sequence|Opts]
end,
{true,Pattern1,Opts1}.
%% Repeat either single or sequence. All match results are accumulated
%% and returned when a halt condition is fulfilled.
repeat_expect(_Name,_Pid,Rest,_Pattern,Acc,#eo{repeat=0}) ->
{ok,lists:reverse(Acc),done,Rest};
repeat_expect(Name,Pid,Data,Pattern,Acc,EO) ->
case teln_expect1(Name,Pid,Data,Pattern,[],EO) of
{ok,Matched,Rest} ->
EO1 = EO#eo{repeat=EO#eo.repeat-1},
repeat_expect(Name,Pid,Rest,Pattern,[Matched|Acc],EO1);
{halt,Why,Rest} ->
{ok,lists:reverse(Acc),Why,Rest};
{error,Reason} ->
{error,Reason}
end.
teln_expect1(Name,Pid,Data,Pattern,Acc,EO=#eo{idle_timeout=IdleTO,
total_timeout=TotalTO}) ->
%% TotalTO is a float value in this loop (unless it's 'infinity'),
%% but an integer value will be passed to the other functions
EOMod = if TotalTO /= infinity -> EO#eo{total_timeout=trunc(TotalTO)};
true -> EO
end,
ExpectFun = case EOMod#eo.seq of
true -> fun() ->
seq_expect(Name,Pid,Data,Pattern,Acc,EOMod)
end;
false -> fun() ->
one_expect(Name,Pid,Data,Pattern,EOMod)
end
end,
case ExpectFun() of
{match,Match,Rest} ->
{ok,Match,Rest};
{halt,Why,Rest} ->
{halt,Why,Rest};
NotFinished ->
%% Get more data
Fun = fun() -> get_data1(EOMod#eo.teln_pid) end,
BreakAfter = if TotalTO < IdleTO ->
%% use the integer value
EOMod#eo.total_timeout;
true ->
IdleTO
end,
{PatOrPats1,Acc1,Rest1} = case NotFinished of
{nomatch,Rest0} ->
%% one expect
{Pattern,[],Rest0};
{continue,Pats0,Acc0,Rest0} ->
%% sequence
{Pats0,Acc0,Rest0}
end,
case timer:tc(ct_gen_conn, do_within_time, [Fun,BreakAfter]) of
{_,{error,Reason}} ->
%% A timeout will occur when the telnet connection
%% is idle for EO#eo.idle_timeout milliseconds.
if Rest1 /= [] ->
log(name_or_pid(Name,Pid)," ~ts",[Rest1]);
true ->
ok
end,
{error,Reason};
{_,{ok,Data1}} when TotalTO == infinity ->
teln_expect1(Name,Pid,Rest1++Data1,PatOrPats1,Acc1,EOMod);
{Elapsed,{ok,Data1}} ->
TVal = TotalTO - (Elapsed/1000),
if TVal =< 0 ->
{error,timeout};
true ->
EO1 = EO#eo{total_timeout = TVal},
teln_expect1(Name,Pid,Rest1++Data1,
PatOrPats1,Acc1,EO1)
end
end
end.
get_data1(Pid) ->
case ct_telnet_client:get_data(Pid) of
{ok,[]} ->
get_data1(Pid);
{ok,Data} ->
{ok,Data}
end.
%% 1) Single expect.
%% First the whole data chunk is searched for a prompt (to avoid doing
%% a regexp match for the prompt at each line).
%% If we are searching for anything else, the datachunk is split into
%% lines and each line is matched against each pattern.
%% one_expect: split data chunk at prompts
one_expect(Name,Pid,Data,Pattern,EO) when EO#eo.prompt_check==false ->
% io:format("Raw Data ~tp Pattern ~tp EO ~tp ",[Data,Pattern,EO]),
one_expect1(Name,Pid,Data,Pattern,[],EO#eo{found_prompt=false});
one_expect(Name,Pid,Data,Pattern,EO) ->
case match_prompt(Data,EO#eo.prx) of
{prompt,UptoPrompt,PromptType,Rest} ->
case Pattern of
[Prompt] when Prompt==prompt; Prompt=={prompt,PromptType} ->
%% Only searching for prompt
log_lines(Name,Pid,UptoPrompt),
log(name_or_pid(Name,Pid),"PROMPT: ~ts",[PromptType]),
{match,{prompt,PromptType},Rest};
[{prompt,_OtherPromptType}] ->
%% Only searching for one specific prompt, not this one
log_lines(Name,Pid,UptoPrompt),
{nomatch,Rest};
_ ->
one_expect1(Name,Pid,UptoPrompt,Pattern,Rest,
EO#eo{found_prompt=PromptType})
end;
noprompt ->
case Pattern of
[Prompt] when Prompt==prompt; element(1,Prompt)==prompt ->
%% Only searching for prompt
LastLine = log_lines_not_last(Name,Pid,Data),
{nomatch,LastLine};
_ ->
one_expect1(Name,Pid,Data,Pattern,[],
EO#eo{found_prompt=false})
end
end.
%% one_expect1: split data chunk at lines
one_expect1(Name,Pid,Data,Pattern,Rest,EO) ->
case match_lines(Name,Pid,Data,Pattern,EO) of
{match,Match,MatchRest} ->
{match,Match,MatchRest++Rest};
{nomatch,prompt} ->
one_expect(Name,Pid,Rest,Pattern,EO);
{nomatch,NoMatchRest} ->
{nomatch,NoMatchRest++Rest};
{halt,Why,HaltRest} ->
{halt,Why,HaltRest++Rest}
end.
%% 2) Sequence.
%% First the whole data chunk is searched for a prompt (to avoid doing
%% a regexp match for the prompt at each line).
%% If we are searching for anything else, the datachunk is split into
%% lines and each line is matched against the first pattern in the list.
%% When a match is found, the match result is accumulated, and we keep
%% searching for the next pattern in the list.
%% seq_expect: Split data chunk at prompts
seq_expect(_Name,_Pid,Data,[],Acc,_EO) ->
{match,lists:reverse(Acc),Data};
seq_expect(_Name,_Pid,[],Patterns,Acc,_EO) ->
{continue,Patterns,lists:reverse(Acc),[]};
seq_expect(Name,Pid,Data,Patterns,Acc,EO) when EO#eo.prompt_check==false ->
seq_expect1(Name,Pid,Data,Patterns,Acc,[],EO#eo{found_prompt=false});
seq_expect(Name,Pid,Data,Patterns,Acc,EO) ->
case match_prompt(Data,EO#eo.prx) of
{prompt,UptoPrompt,PromptType,Rest} ->
seq_expect1(Name,Pid,UptoPrompt,Patterns,Acc,Rest,
EO#eo{found_prompt=PromptType});
noprompt ->
seq_expect1(Name,Pid,Data,Patterns,Acc,[],EO#eo{found_prompt=false})
end.
%% seq_expect1: For one prompt-chunk, match each pattern - line by
%% line if it is other than the prompt we are seaching for.
seq_expect1(Name,Pid,Data,[prompt|Patterns],Acc,Rest,EO) ->
case EO#eo.found_prompt of
false ->
LastLine = log_lines_not_last(Name,Pid,Data),
%% Rest==[] because no prompt is found
{continue,[prompt|Patterns],Acc,LastLine};
PromptType ->
log_lines(Name,Pid,Data),
log(name_or_pid(Name,Pid),"PROMPT: ~ts",[PromptType]),
seq_expect(Name,Pid,Rest,Patterns,[{prompt,PromptType}|Acc],EO)
end;
seq_expect1(Name,Pid,Data,[{prompt,PromptType}|Patterns],Acc,Rest,EO) ->
case EO#eo.found_prompt of
false ->
LastLine = log_lines_not_last(Name,Pid,Data),
%% Rest==[] because no prompt is found
{continue,[{prompt,PromptType}|Patterns],Acc,LastLine};
PromptType ->
log_lines(Name,Pid,Data),
log(name_or_pid(Name,Pid),"PROMPT: ~ts", [PromptType]),
seq_expect(Name,Pid,Rest,Patterns,[{prompt,PromptType}|Acc],EO);
_OtherPromptType ->
log_lines(Name,Pid,Data),
seq_expect(Name,Pid,Rest,[{prompt,PromptType}|Patterns],Acc,EO)
end;
seq_expect1(Name,Pid,Data,[Pattern|Patterns],Acc,Rest,EO) ->
case match_lines(Name,Pid,Data,[Pattern],EO) of
{match,Match,MatchRest} ->
seq_expect1(Name,Pid,MatchRest,Patterns,[Match|Acc],Rest,EO);
{nomatch,prompt} ->
seq_expect(Name,Pid,Rest,[Pattern|Patterns],Acc,EO);
{nomatch,NoMatchRest} when Rest==[] ->
%% The data did not end with a prompt
{continue,[Pattern|Patterns],Acc,NoMatchRest};
{halt,Why,HaltRest} ->
{halt,Why,HaltRest++Rest}
end;
seq_expect1(_Name,_Pid,Data,[],Acc,Rest,_EO) ->
{match,lists:reverse(Acc),Data++Rest}.
%% Split prompt-chunk at lines
match_lines(Name,Pid,Data,Patterns,EO) ->
FoundPrompt = EO#eo.found_prompt,
case one_line(Data,[]) of
{noline,Rest} when FoundPrompt=/=false ->
%% This is the line including the prompt
case match_line(Name,Pid,Rest,Patterns,FoundPrompt,false,EO) of
nomatch ->
{nomatch,prompt};
{Tag,Match} ->
{Tag,Match,[]}
end;
{noline,Rest} when EO#eo.prompt_check==false ->
case match_line(Name,Pid,Rest,Patterns,false,false,EO) of
nomatch ->
{nomatch,Rest};
{Tag,Match} ->
{Tag,Match,[]}
end;
{noline,Rest} ->
{nomatch,Rest};
{Line,Rest} ->
case match_line(Name,Pid,Line,Patterns,false,true,EO) of
nomatch ->
match_lines(Name,Pid,Rest,Patterns,EO);
{Tag,Match} ->
{Tag,Match,Rest}
end
end.
%% For one line, match each pattern
match_line(Name,Pid,Line,Patterns,FoundPrompt,Terminated,EO) ->
match_line(Name,Pid,Line,Patterns,FoundPrompt,Terminated,EO,match).
match_line(Name,Pid,Line,[prompt|Patterns],false,Term,EO,RetTag) ->
match_line(Name,Pid,Line,Patterns,false,Term,EO,RetTag);
match_line(Name,Pid,Line,[prompt|_Patterns],FoundPrompt,_Term,_EO,RetTag) ->
log(name_or_pid(Name,Pid)," ~ts",[Line]),
log(name_or_pid(Name,Pid),"PROMPT: ~ts",[FoundPrompt]),
{RetTag,{prompt,FoundPrompt}};
match_line(Name,Pid,Line,[{prompt,PromptType}|_Patterns],FoundPrompt,_Term,
_EO,RetTag) when PromptType==FoundPrompt ->
log(name_or_pid(Name,Pid)," ~ts",[Line]),
log(name_or_pid(Name,Pid),"PROMPT: ~ts",[FoundPrompt]),
{RetTag,{prompt,FoundPrompt}};
match_line(Name,Pid,Line,[{prompt,PromptType}|Patterns],FoundPrompt,Term,
EO,RetTag)
when PromptType=/=FoundPrompt ->
match_line(Name,Pid,Line,Patterns,FoundPrompt,Term,EO,RetTag);
match_line(Name,Pid,Line,[{Tag,Pattern}|Patterns],FoundPrompt,Term,EO,RetTag) ->
case re:run(Line,Pattern,[{capture,all,list}]) of
nomatch ->
match_line(Name,Pid,Line,Patterns,FoundPrompt,Term,EO,RetTag);
{match,Match} ->
log(name_or_pid(Name,Pid),"MATCH: ~ts",[Line]),
{RetTag,{Tag,Match}}
end;
match_line(Name,Pid,Line,[Pattern|Patterns],FoundPrompt,Term,EO,RetTag) ->
case re:run(Line,Pattern,[{capture,all,list}]) of
nomatch ->
match_line(Name,Pid,Line,Patterns,FoundPrompt,Term,EO,RetTag);
{match,Match} ->
log(name_or_pid(Name,Pid),"MATCH: ~ts",[Line]),
{RetTag,Match}
end;
match_line(Name,Pid,Line,[],FoundPrompt,Term,EO,match) ->
match_line(Name,Pid,Line,EO#eo.haltpatterns,FoundPrompt,Term,EO,halt);
%% print any terminated line that can not be matched
match_line(Name,Pid,Line,[],_FoundPrompt,true,_EO,halt) ->
log(name_or_pid(Name,Pid)," ~ts",[Line]),
nomatch;
%% if there's no line termination, Line is saved as Rest (above) and will
%% be printed later
match_line(_Name,_Pid,_Line,[],_FoundPrompt,false,_EO,halt) ->
nomatch.
one_line([$\n|Rest],Line) ->
{lists:reverse(Line),Rest};
one_line([$\r|Rest],Line) ->
one_line(Rest,Line);
one_line([0|Rest],Line) ->
one_line(Rest,Line);
one_line([Char|Rest],Line) ->
one_line(Rest,[Char|Line]);
one_line([],Line) ->
{noline,lists:reverse(Line)}.
debug_log_lines(String) ->
Old = put(silent,true),
log_lines(undefined,undefined,String),
put(silent,Old).
log_lines(Name,Pid,String) ->
case log_lines_not_last(Name,Pid,String) of
[] ->
ok;
LastLine ->
log(name_or_pid(Name,Pid)," ~ts",[LastLine])
end.
log_lines_not_last(Name,Pid,String) ->
case add_tabs(String,[],[]) of
{[],LastLine} ->
LastLine;
{String1,LastLine} ->
log(name_or_pid(Name,Pid),"~ts",[String1]),
LastLine
end.
name_or_pid(undefined,Pid) -> Pid;
name_or_pid(Name,_) -> Name.
add_tabs([0|Rest],Acc,LastLine) ->
add_tabs(Rest,Acc,LastLine);
add_tabs([$\r|Rest],Acc,LastLine) ->
add_tabs(Rest,Acc,LastLine);
add_tabs([$\n|Rest],Acc,LastLine) ->
add_tabs(Rest,[$\n|LastLine] ++ [$\s,$\s,$\s,$\s,$\s,$\s,$\s|Acc],[]);
add_tabs([Ch|Rest],Acc,LastLine) ->
add_tabs(Rest,Acc,[Ch|LastLine]);
add_tabs([],[$\n|Acc],LastLine) ->
{lists:reverse(Acc),lists:reverse(LastLine)};
add_tabs([],[],LastLine) ->
{[],lists:reverse(LastLine)}.
teln_receive_until_prompt(Pid,Prx,Timeout) ->
Fun = fun() -> teln_receive_until_prompt(Pid,Prx,[],[]) end,
ct_gen_conn:do_within_time(Fun, Timeout).
teln_receive_until_prompt(Pid,Prx,Acc,LastLine) ->
{ok,Data} = ct_telnet_client:get_data(Pid),
case check_for_prompt(Prx,LastLine++Data) of
{prompt,Lines,PromptType,Rest} ->
Return = lists:reverse(lists:append([Lines|Acc])),
{ok,Return,PromptType,Rest};
{noprompt,Lines,LastLine1} ->
teln_receive_until_prompt(Pid,Prx,[Lines|Acc],LastLine1)
end.
check_for_prompt(Prx,Data) ->
case match_prompt(Data,Prx) of
{prompt,UptoPrompt,PromptType,Rest} ->
{RevLines,LastLine} = split_lines(UptoPrompt),
{prompt,[LastLine|RevLines],PromptType,Rest};
noprompt ->
{RevLines,Rest} = split_lines(Data),
{noprompt,RevLines,Rest}
end.
split_lines(String) ->
split_lines(String,[],[]).
split_lines([$\n|Rest],Line,Lines) when Line /= [] ->
split_lines(Rest,[],[lists:reverse(Line)|Lines]);
split_lines([$\n|Rest],[],Lines) ->
split_lines(Rest,[],Lines);
split_lines([$\r|Rest],Line,Lines) ->
split_lines(Rest,Line,Lines);
split_lines([0|Rest],Line,Lines) ->
split_lines(Rest,Line,Lines);
split_lines([Char|Rest],Line,Lines) ->
split_lines(Rest,[Char|Line],Lines);
split_lines([],Line,Lines) ->
{Lines,lists:reverse(Line)}.
match_prompt(Str,Prx) ->
match_prompt(Str,Prx,[]).
match_prompt(Str,Prx,Acc) ->
case re:run(Str,Prx,[unicode]) of
nomatch ->
noprompt;
{match,[{Start,Len}]} ->
case split_prompt_string(Str,Start+1,Start+Len,1,[],[]) of
{noprompt,Done,Rest} ->
match_prompt(Rest,Prx,Done);
{prompt,UptoPrompt,Prompt,Rest} ->
{prompt,lists:reverse(UptoPrompt++Acc),
lists:reverse(Prompt),Rest}
end
end.
split_prompt_string([Ch|Str],Start,End,N,UptoPrompt,Prompt) when N<Start ->
split_prompt_string(Str,Start,End,N+1,[Ch|UptoPrompt],Prompt);
split_prompt_string([Ch|Str],Start,End,N,UptoPrompt,Prompt)
when N>=Start, N<End->
split_prompt_string(Str,Start,End,N+1,UptoPrompt,[Ch|Prompt]);
split_prompt_string([Ch|Rest],_Start,End,N,UptoPrompt,Prompt) when N==End ->
case UptoPrompt of
[$",$=,$T,$P,$M,$O,$R,$P|_] ->
%% This is a line from "listenv", it is not a real prompt
{noprompt,[Ch|Prompt]++UptoPrompt,Rest};
[$\s,$t,$s,$a|_] when Prompt==":nigol" ->
%% This is probably the "Last login:" statement which is
%% written when telnet connection is openend.
{noprompt,[Ch|Prompt]++UptoPrompt,Rest};
_ ->
{prompt,[Ch|Prompt]++UptoPrompt,[Ch|Prompt],Rest}
end.