%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2010-2011. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
%% compliance with the License. You should have received a copy of the
%% Erlang Public License along with this software. If not, it can be
%% retrieved online at http://www.erlang.org/.
%%
%% Software distributed under the License is distributed on an "AS IS"
%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
%% the License for the specific language governing rights and limitations
%% under the License.
%%
%% %CopyrightEnd%
%%
-module(beam_receive).
-export([module/2]).
-import(lists, [foldl/3,reverse/1,reverse/2]).
%%%
%%% In code such as:
%%%
%%% Ref = make_ref(), %Or erlang:monitor(process, Pid)
%%% .
%%% .
%%% .
%%% receive
%%% {Ref,Reply} -> Reply
%%% end.
%%%
%%% we know that none of the messages that exist in the message queue
%%% before the call to make_ref/0 can be matched out in the receive
%%% statement. Therefore we can avoid going through the entire message
%%% queue if we introduce two new instructions (here written as
%%% BIFs in pseudo-Erlang):
%%%
%%% recv_mark(SomeUniqInteger),
%%% Ref = make_ref(),
%%% .
%%% .
%%% .
%%% recv_set(SomeUniqInteger),
%%% receive
%%% {Ref,Reply} -> Reply
%%% end.
%%%
%%% The recv_mark/1 instruction will save the current position and
%%% SomeUniqInteger in the process context. The recv_set
%%% instruction will verify that SomeUniqInteger is still stored
%%% in the process context. If it is, it will set the current pointer
%%% for the message queue (the next message to be read out) to the
%%% position that was saved by recv_mark/1.
%%%
%%% The remove_message instruction must be modified to invalidate
%%% the information stored by the previous recv_mark/1, in case there
%%% is another receive executed between the calls to recv_mark/1 and
%%% recv_set/1.
%%%
%%% We use a reference to a label (i.e. a position in the loaded code)
%%% as the SomeUniqInteger.
%%%
module({Mod,Exp,Attr,Fs0,Lc}, _Opts) ->
Fs = [function(F) || F <- Fs0],
Code = {Mod,Exp,Attr,Fs,Lc},
{ok,Code}.
%%%
%%% Local functions.
%%%
function({function,Name,Arity,Entry,Is}) ->
try
D = beam_utils:index_labels(Is),
{function,Name,Arity,Entry,opt(Is, D, [])}
catch
Class:Error ->
Stack = erlang:get_stacktrace(),
io:fwrite("Function: ~w/~w\n", [Name,Arity]),
erlang:raise(Class, Error, Stack)
end.
opt([{call_ext,A,{extfunc,erlang,spawn_monitor,A}}=I0|Is0], D, Acc)
when A =:= 1; A =:= 3 ->
case ref_in_tuple(Is0) of
no ->
opt(Is0, D, [I0|Acc]);
{yes,Regs,Is1,MatchReversed} ->
%% The call creates a brand new reference. Now
%% search for a receive statement in the same
%% function that will match against the reference.
case opt_recv(Is1, Regs, D) of
no ->
opt(Is0, D, [I0|Acc]);
{yes,Is,Lbl} ->
opt(Is, D, MatchReversed++[I0,{recv_mark,{f,Lbl}}|Acc])
end
end;
opt([{call_ext,Arity,{extfunc,erlang,Name,Arity}}=I|Is0], D, Acc) ->
case creates_new_ref(Name, Arity) of
true ->
%% The call creates a brand new reference. Now
%% search for a receive statement in the same
%% function that will match against the reference.
case opt_recv(Is0, regs_init_x0(), D) of
no ->
opt(Is0, D, [I|Acc]);
{yes,Is,Lbl} ->
opt(Is, D, [I,{recv_mark,{f,Lbl}}|Acc])
end;
false ->
opt(Is0, D, [I|Acc])
end;
opt([I|Is], D, Acc) ->
opt(Is, D, [I|Acc]);
opt([], _, Acc) ->
reverse(Acc).
ref_in_tuple([{test,is_tuple,_,[{x,0}]}=I1,
{test,test_arity,_,[{x,0},2]}=I2,
{block,[{set,[_],[{x,0}],{get_tuple_element,0}},
{set,[Dst],[{x,0}],{get_tuple_element,1}}|Bl]}=I3|Is]) ->
ref_in_tuple_1(Bl, Dst, Is, [I3,I2,I1]);
ref_in_tuple([{test,is_tuple,_,[{x,0}]}=I1,
{test,test_arity,_,[{x,0},2]}=I2,
{block,[{set,[Dst],[{x,0}],{get_tuple_element,1}}|Bl]}=I3|Is]) ->
ref_in_tuple_1(Bl, Dst, Is, [I3,I2,I1]);
ref_in_tuple(_) -> no.
ref_in_tuple_1(Bl, Dst, Is, MatchReversed) ->
Regs0 = regs_init_singleton(Dst),
Regs = opt_update_regs_bl(Bl, Regs0),
{yes,Regs,Is,MatchReversed}.
%% creates_new_ref(Name, Arity) -> true|false.
%% Return 'true' if the BIF Name/Arity will create a new reference.
creates_new_ref(monitor, 2) -> true;
creates_new_ref(make_ref, 0) -> true;
creates_new_ref(_, _) -> false.
%% opt_recv([Instruction], Regs, LabelIndex) -> no|{yes,[Instruction]}
%% Search for a receive statement that will only retrieve messages
%% that contain the newly created reference (which is currently in {x,0}).
opt_recv(Is, Regs, D) ->
L = gb_sets:empty(),
opt_recv(Is, D, Regs, L, []).
opt_recv([{label,L}=Lbl,{loop_rec,{f,Fail},_}=Loop|Is], D, R0, _, Acc) ->
R = regs_kill_not_live(0, R0),
case regs_to_list(R) of
[{y,_}=RefReg] ->
%% We now have the new reference in the Y register RefReg
%% and the current instruction is the beginning of a
%% receive statement. We must now verify that only messages
%% that contain the reference will be matched.
case opt_ref_used(Is, RefReg, Fail, D) of
false ->
no;
true ->
RecvSet = {recv_set,{f,L}},
{yes,reverse(Acc, [RecvSet,Lbl,Loop|Is]),L}
end;
[] ->
no
end;
opt_recv([I|Is], D, R0, L0, Acc) ->
{R,L} = opt_update_regs(I, R0, L0),
case regs_empty(R) of
true ->
%% The reference is no longer alive. There is no
%% point in continuing the search.
no;
false ->
opt_recv(Is, D, R, L, [I|Acc])
end.
opt_update_regs({block,Bl}, R, L) ->
{opt_update_regs_bl(Bl, R),L};
opt_update_regs({call,_,_}, R, L) ->
{regs_kill_not_live(0, R),L};
opt_update_regs({call_ext,_,_}, R, L) ->
{regs_kill_not_live(0, R),L};
opt_update_regs({call_fun,_}, R, L) ->
{regs_kill_not_live(0, R),L};
opt_update_regs({kill,Y}, R, L) ->
{regs_kill([Y], R),L};
opt_update_regs({'catch',_,{f,Lbl}}, R, L) ->
{R,gb_sets:add(Lbl, L)};
opt_update_regs({catch_end,_}, R, L) ->
{R,L};
opt_update_regs({label,Lbl}, R, L) ->
case gb_sets:is_member(Lbl, L) of
false ->
%% We can't allow arbitrary labels (since the receive
%% could be entered without first creating the reference).
{regs_init(),L};
true ->
%% A catch label for a previously seen catch instruction is OK.
{R,L}
end;
opt_update_regs({try_end,_}, R, L) ->
{R,L};
opt_update_regs({line,_}, R, L) ->
{R,L};
opt_update_regs(_I, _R, L) ->
%% Unrecognized instruction. Abort the search.
{regs_init(),L}.
opt_update_regs_bl([{set,Ds,_,{alloc,Live,_}}|Is], Regs0) ->
Regs1 = regs_kill_not_live(Live, Regs0),
Regs = regs_kill(Ds, Regs1),
opt_update_regs_bl(Is, Regs);
opt_update_regs_bl([{set,[Dst]=Ds,[Src],move}|Is], Regs0) ->
Regs1 = regs_kill(Ds, Regs0),
Regs = case regs_is_member(Src, Regs1) of
false -> Regs1;
true -> regs_add(Dst, Regs1)
end,
opt_update_regs_bl(Is, Regs);
opt_update_regs_bl([{set,Ds,_,_}|Is], Regs0) ->
Regs = regs_kill(Ds, Regs0),
opt_update_regs_bl(Is, Regs);
opt_update_regs_bl([], Regs) -> Regs.
%% opt_ref_used([Instruction], RefRegister, FailLabel, LabelIndex) -> true|false
%% Return 'true' if it is certain that only messages that contain the same
%% reference as in RefRegister can be matched out. Otherwise return 'false'.
%%
%% Basically, we follow all possible paths through the receive statement.
%% If all paths are safe, we return 'true'.
%%
%% A branch to FailLabel is safe, because it exits the receive statement
%% and no further message may be matched out.
%%
%% If a path hits an comparision between RefRegister and part of the message,
%% that path is safe (any messages that may be matched further down the
%% path is guaranteed to contain the reference).
%%
%% Otherwise, if we hit a 'remove_message' instruction, we give up
%% and return 'false' (the optimization is definitely unsafe). If
%% we hit an unrecognized instruction, we also give up and return
%% 'false' (the optimization may be unsafe).
opt_ref_used(Is, RefReg, Fail, D) ->
Done = gb_sets:singleton(Fail),
Regs = regs_init_x0(),
try
opt_ref_used_1(Is, RefReg, D, Done, Regs),
true
catch
throw:not_used ->
false
end.
%% This functions only returns if all paths through the receive
%% statement are safe, and throws an 'not_used' term otherwise.
opt_ref_used_1([{block,Bl}|Is], RefReg, D, Done, Regs0) ->
Regs = opt_ref_used_bl(Bl, Regs0),
opt_ref_used_1(Is, RefReg, D, Done, Regs);
opt_ref_used_1([{test,is_eq_exact,{f,Fail},Args}|Is], RefReg, D, Done0, Regs) ->
Done = opt_ref_used_at(Fail, RefReg, D, Done0, Regs),
case is_ref_msg_comparison(Args, RefReg, Regs) of
false ->
opt_ref_used_1(Is, RefReg, D, Done, Regs);
true ->
%% The instructions that follow (Is) can only be executed
%% if the message contains the same reference as in RefReg.
Done
end;
opt_ref_used_1([{test,is_ne_exact,{f,Fail},Args}|Is], RefReg, D, Done0, Regs) ->
Done = opt_ref_used_1(Is, RefReg, D, Done0, Regs),
case is_ref_msg_comparison(Args, RefReg, Regs) of
false ->
opt_ref_used_at(Fail, RefReg, D, Done, Regs);
true ->
Done
end;
opt_ref_used_1([{test,_,{f,Fail},_}|Is], RefReg, D, Done0, Regs) ->
Done = opt_ref_used_at(Fail, RefReg, D, Done0, Regs),
opt_ref_used_1(Is, RefReg, D, Done, Regs);
opt_ref_used_1([{select,_,_,{f,Fail},List}|_], RefReg, D, Done, Regs) ->
Lbls = [F || {f,F} <- List] ++ [Fail],
opt_ref_used_in_all(Lbls, RefReg, D, Done, Regs);
opt_ref_used_1([{label,Lbl}|Is], RefReg, D, Done, Regs) ->
case gb_sets:is_member(Lbl, Done) of
true -> Done;
false -> opt_ref_used_1(Is, RefReg, D, Done, Regs)
end;
opt_ref_used_1([{loop_rec_end,_}|_], _, _, Done, _) ->
Done;
opt_ref_used_1([_I|_], _RefReg, _D, _Done, _Regs) ->
%% The optimization may be unsafe.
throw(not_used).
%% is_ref_msg_comparison(Args, RefReg, RegisterSet) -> true|false.
%% Return 'true' if Args denotes a comparison between the
%% reference and message or part of the message.
is_ref_msg_comparison([R,RefReg], RefReg, Regs) ->
regs_is_member(R, Regs);
is_ref_msg_comparison([RefReg,R], RefReg, Regs) ->
regs_is_member(R, Regs);
is_ref_msg_comparison([_,_], _, _) -> false.
opt_ref_used_in_all([L|Ls], RefReg, D, Done0, Regs) ->
Done = opt_ref_used_at(L, RefReg, D, Done0, Regs),
opt_ref_used_in_all(Ls, RefReg, D, Done, Regs);
opt_ref_used_in_all([], _, _, Done, _) -> Done.
opt_ref_used_at(Fail, RefReg, D, Done0, Regs) ->
case gb_sets:is_member(Fail, Done0) of
true ->
Done0;
false ->
Is = beam_utils:code_at(Fail, D),
Done = opt_ref_used_1(Is, RefReg, D, Done0, Regs),
gb_sets:add(Fail, Done)
end.
opt_ref_used_bl([{set,[],[],remove_message}|_], _) ->
%% We have proved that a message that does not depend on the
%% reference can be matched out.
throw(not_used);
opt_ref_used_bl([{set,Ds,Ss,_}|Is], Regs0) ->
case regs_all_members(Ss, Regs0) of
false ->
%% The destination registers may be assigned values that
%% are not dependent on the message being matched.
Regs = regs_kill(Ds, Regs0),
opt_ref_used_bl(Is, Regs);
true ->
%% All the sources depend on the message directly or
%% indirectly.
Regs = regs_add_list(Ds, Regs0),
opt_ref_used_bl(Is, Regs)
end;
opt_ref_used_bl([], Regs) -> Regs.
%%%
%%% Functions for keeping track of a set of registers.
%%%
%% regs_init() -> RegisterSet
%% Return an empty set of registers.
regs_init() ->
{0,0}.
%% regs_init_singleton(Register) -> RegisterSet
%% Return a set that only contains one register.
regs_init_singleton(Reg) ->
regs_add(Reg, regs_init()).
%% regs_init_x0() -> RegisterSet
%% Return a set that only contains the {x,0} register.
regs_init_x0() ->
{1 bsl 0,0}.
%% regs_empty(Register) -> true|false
%% Test whether the register set is empty.
regs_empty(R) ->
R =:= {0,0}.
%% regs_kill_not_live(Live, RegisterSet) -> RegisterSet'
%% Kill all registers indicated not live by Live.
regs_kill_not_live(Live, {Xregs,Yregs}) ->
{Xregs band ((1 bsl Live)-1),Yregs}.
%% regs_kill([Register], RegisterSet) -> RegisterSet'
%% Kill all registers mentioned in the list of registers.
regs_kill([{x,N}|Rs], {Xregs,Yregs}) ->
regs_kill(Rs, {Xregs band (bnot (1 bsl N)),Yregs});
regs_kill([{y,N}|Rs], {Xregs,Yregs}) ->
regs_kill(Rs, {Xregs,Yregs band (bnot (1 bsl N))});
regs_kill([{fr,_}|Rs], Regs) ->
regs_kill(Rs, Regs);
regs_kill([], Regs) -> Regs.
regs_add_list(List, Regs) ->
foldl(fun(R, A) -> regs_add(R, A) end, Regs, List).
%% regs_add(Register, RegisterSet) -> RegisterSet'
%% Add a new register to the set of registers.
regs_add({x,N}, {Xregs,Yregs}) ->
{Xregs bor (1 bsl N),Yregs};
regs_add({y,N}, {Xregs,Yregs}) ->
{Xregs,Yregs bor (1 bsl N)}.
%% regs_all_members([Register], RegisterSet) -> true|false
%% Test whether all of the registers are part of the register set.
regs_all_members([R|Rs], Regs) ->
regs_is_member(R, Regs) andalso regs_all_members(Rs, Regs);
regs_all_members([], _) -> true.
%% regs_is_member(Register, RegisterSet) -> true|false
%% Test whether Register is part of the register set.
regs_is_member({x,N}, {Regs,_}) -> Regs band (1 bsl N) =/= 0;
regs_is_member({y,N}, {_,Regs}) -> Regs band (1 bsl N) =/= 0;
regs_is_member(_, _) -> false.
%% regs_to_list(RegisterSet) -> [Register]
%% Convert the register set to an explicit list of registers.
regs_to_list({Xregs,Yregs}) ->
regs_to_list_1(Xregs, 0, x, regs_to_list_1(Yregs, 0, y, [])).
regs_to_list_1(0, _, _, Acc) ->
Acc;
regs_to_list_1(Regs, N, Tag, Acc) when (Regs band 1) =:= 1 ->
regs_to_list_1(Regs bsr 1, N+1, Tag, [{Tag,N}|Acc]);
regs_to_list_1(Regs, N, Tag, Acc) ->
regs_to_list_1(Regs bsr 1, N+1, Tag, Acc).
