%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2007-2016. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%% Purpose : Common utilities used by several optimization passes.
%%
-module(beam_utils).
-export([is_killed_block/2,is_killed/3,is_killed_at/3,
is_not_used/3,is_not_used_at/3,
empty_label_index/0,index_label/3,index_labels/1,
code_at/2,bif_to_test/3,is_pure_test/1,
live_opt/1,delete_live_annos/1,combine_heap_needs/2,
split_even/1]).
-import(lists, [member/2,sort/1,reverse/1,splitwith/2]).
-record(live,
{lbl, %Label to code index.
res}). %Result cache for each label.
%% is_killed_block(Register, [Instruction]) -> true|false
%% Determine whether a register is killed by the instruction sequence inside
%% a block.
%%
%% If true is returned, it means that the register will not be
%% referenced in ANY way (not even indirectly by an allocate instruction);
%% i.e. it is OK to enter the instruction sequence with Register
%% containing garbage.
is_killed_block({x,X}, [{set,_,_,{alloc,Live,_}}|_]) ->
X >= Live;
is_killed_block(R, [{set,Ds,Ss,_Op}|Is]) ->
not member(R, Ss) andalso (member(R, Ds) orelse is_killed_block(R, Is));
is_killed_block(R, [{'%live',_,Regs}|Is]) ->
case R of
{x,X} when (Regs bsr X) band 1 =:= 0 -> true;
_ -> is_killed_block(R, Is)
end;
is_killed_block(_, []) -> false.
%% is_killed(Register, [Instruction], State) -> true|false
%% Determine whether a register is killed by the instruction sequence.
%% If true is returned, it means that the register will not be
%% referenced in ANY way (not even indirectly by an allocate instruction);
%% i.e. it is OK to enter the instruction sequence with Register
%% containing garbage.
%%
%% The state (constructed by index_instructions/1) is used to allow us
%% to determine the kill state across branches.
is_killed(R, Is, D) ->
St = #live{lbl=D,res=gb_trees:empty()},
case check_liveness(R, Is, St) of
{killed,_} -> true;
{_,_} -> false
end.
%% is_killed_at(Reg, Lbl, State) -> true|false
%% Determine whether Reg is killed at label Lbl.
is_killed_at(R, Lbl, D) when is_integer(Lbl) ->
St0 = #live{lbl=D,res=gb_trees:empty()},
case check_liveness_at(R, Lbl, St0) of
{killed,_} -> true;
{_,_} -> false
end.
%% is_not_used(Register, [Instruction], State) -> true|false
%% Determine whether a register is never used in the instruction sequence
%% (it could still be referenced by an allocate instruction, meaning that
%% it MUST be initialized, but that its value does not matter).
%% The state is used to allow us to determine the usage state
%% across branches.
is_not_used(R, Is, D) ->
St = #live{lbl=D,res=gb_trees:empty()},
case check_liveness(R, Is, St) of
{used,_} -> false;
{_,_} -> true
end.
%% is_not_used(Register, [Instruction], State) -> true|false
%% Determine whether a register is never used in the instruction sequence
%% (it could still be referenced by an allocate instruction, meaning that
%% it MUST be initialized, but that its value does not matter).
%% The state is used to allow us to determine the usage state
%% across branches.
is_not_used_at(R, Lbl, D) ->
St = #live{lbl=D,res=gb_trees:empty()},
case check_liveness_at(R, Lbl, St) of
{used,_} -> false;
{_,_} -> true
end.
%% index_labels(FunctionIs) -> State
%% Index the instruction sequence so that we can quickly
%% look up the instruction following a specific label.
index_labels(Is) ->
index_labels_1(Is, []).
%% empty_label_index() -> State
%% Create an empty label index.
empty_label_index() ->
gb_trees:empty().
%% index_label(Label, [Instruction], State) -> State
%% Add an index for a label.
index_label(Lbl, Is0, Acc) ->
Is = drop_labels(Is0),
gb_trees:enter(Lbl, Is, Acc).
%% code_at(Label, State) -> [I].
%% Retrieve the code at the given label.
code_at(L, Ll) ->
gb_trees:get(L, Ll).
%% bif_to_test(Bif, [Op], Fail) -> {test,Test,Fail,[Op]}
%% Convert a BIF to a test. Fail if not possible.
bif_to_test(is_atom, [_]=Ops, Fail) -> {test,is_atom,Fail,Ops};
bif_to_test(is_boolean, [_]=Ops, Fail) -> {test,is_boolean,Fail,Ops};
bif_to_test(is_binary, [_]=Ops, Fail) -> {test,is_binary,Fail,Ops};
bif_to_test(is_bitstring,[_]=Ops, Fail) -> {test,is_bitstr,Fail,Ops};
bif_to_test(is_float, [_]=Ops, Fail) -> {test,is_float,Fail,Ops};
bif_to_test(is_function, [_]=Ops, Fail) -> {test,is_function,Fail,Ops};
bif_to_test(is_function, [_,_]=Ops, Fail) -> {test,is_function2,Fail,Ops};
bif_to_test(is_integer, [_]=Ops, Fail) -> {test,is_integer,Fail,Ops};
bif_to_test(is_list, [_]=Ops, Fail) -> {test,is_list,Fail,Ops};
bif_to_test(is_map, [_]=Ops, Fail) -> {test,is_map,Fail,Ops};
bif_to_test(is_number, [_]=Ops, Fail) -> {test,is_number,Fail,Ops};
bif_to_test(is_pid, [_]=Ops, Fail) -> {test,is_pid,Fail,Ops};
bif_to_test(is_port, [_]=Ops, Fail) -> {test,is_port,Fail,Ops};
bif_to_test(is_reference, [_]=Ops, Fail) -> {test,is_reference,Fail,Ops};
bif_to_test(is_tuple, [_]=Ops, Fail) -> {test,is_tuple,Fail,Ops};
bif_to_test('=<', [A,B], Fail) -> {test,is_ge,Fail,[B,A]};
bif_to_test('>', [A,B], Fail) -> {test,is_lt,Fail,[B,A]};
bif_to_test('<', [_,_]=Ops, Fail) -> {test,is_lt,Fail,Ops};
bif_to_test('>=', [_,_]=Ops, Fail) -> {test,is_ge,Fail,Ops};
bif_to_test('==', [A,nil], Fail) -> {test,is_nil,Fail,[A]};
bif_to_test('==', [_,_]=Ops, Fail) -> {test,is_eq,Fail,Ops};
bif_to_test('/=', [_,_]=Ops, Fail) -> {test,is_ne,Fail,Ops};
bif_to_test('=:=', [A,nil], Fail) -> {test,is_nil,Fail,[A]};
bif_to_test('=:=', [_,_]=Ops, Fail) -> {test,is_eq_exact,Fail,Ops};
bif_to_test('=/=', [_,_]=Ops, Fail) -> {test,is_ne_exact,Fail,Ops};
bif_to_test(is_record, [_,_,_]=Ops, Fail) -> {test,is_record,Fail,Ops}.
%% is_pure_test({test,Op,Fail,Ops}) -> true|false.
%% Return 'true' if the test instruction does not modify any
%% registers and/or bit syntax matching state.
%%
is_pure_test({test,is_eq,_,[_,_]}) -> true;
is_pure_test({test,is_ne,_,[_,_]}) -> true;
is_pure_test({test,is_eq_exact,_,[_,_]}) -> true;
is_pure_test({test,is_ne_exact,_,[_,_]}) -> true;
is_pure_test({test,is_ge,_,[_,_]}) -> true;
is_pure_test({test,is_lt,_,[_,_]}) -> true;
is_pure_test({test,is_nil,_,[_]}) -> true;
is_pure_test({test,is_nonempty_list,_,[_]}) -> true;
is_pure_test({test,test_arity,_,[_,_]}) -> true;
is_pure_test({test,has_map_fields,_,[_|_]}) -> true;
is_pure_test({test,is_bitstr,_,[_]}) -> true;
is_pure_test({test,is_function2,_,[_,_]}) -> true;
is_pure_test({test,Op,_,Ops}) ->
erl_internal:new_type_test(Op, length(Ops)).
%% live_opt([Instruction]) -> [Instruction].
%% Go through the instruction sequence in reverse execution
%% order, keep track of liveness and remove 'move' instructions
%% whose destination is a register that will not be used.
%% Also insert {'%live',Live,Regs} annotations at the beginning
%% and end of each block.
%%
live_opt(Is0) ->
{[{label,Fail}|_]=Bef,[Fi|Is]} =
splitwith(fun({func_info,_,_,_}) -> false;
(_) -> true
end, Is0),
{func_info,_,_,Live} = Fi,
D = gb_trees:insert(Fail, live_call(Live), gb_trees:empty()),
Bef ++ [Fi|live_opt(reverse(Is), 0, D, [])].
%% delete_live_annos([Instruction]) -> [Instruction].
%% Delete all live annotations.
%%
delete_live_annos([{block,Bl0}|Is]) ->
case delete_live_annos(Bl0) of
[] -> delete_live_annos(Is);
[_|_]=Bl -> [{block,Bl}|delete_live_annos(Is)]
end;
delete_live_annos([{'%live',_,_}|Is]) ->
delete_live_annos(Is);
delete_live_annos([I|Is]) ->
[I|delete_live_annos(Is)];
delete_live_annos([]) -> [].
%% combine_heap_needs(HeapNeed1, HeapNeed2) -> HeapNeed
%% Combine the heap need for two allocation instructions.
combine_heap_needs({alloc,Alloc1}, {alloc,Alloc2}) ->
{alloc,combine_alloc_lists(Alloc1, Alloc2)};
combine_heap_needs({alloc,Alloc}, Words) when is_integer(Words) ->
{alloc,combine_alloc_lists(Alloc, [{words,Words}])};
combine_heap_needs(Words, {alloc,Alloc}) when is_integer(Words) ->
{alloc,combine_alloc_lists(Alloc, [{words,Words}])};
combine_heap_needs(H1, H2) when is_integer(H1), is_integer(H2) ->
H1+H2.
%% split_even/1
%% [1,2,3,4,5,6] -> {[1,3,5],[2,4,6]}
split_even(Rs) -> split_even(Rs, [], []).
%%%
%%% Local functions.
%%%
%% check_liveness(Reg, [Instruction], #live{}) ->
%% {killed | not_used | used, #live{}}
%% Find out whether Reg is used or killed in instruction sequence.
%%
%% killed - Reg is assigned or killed by an allocation instruction.
%% not_used - the value of Reg is not used, but Reg must not be garbage
%% used - Reg is used
check_liveness(R, [{block,Blk}|Is], St0) ->
case check_liveness_block(R, Blk, St0) of
{transparent,St1} ->
check_liveness(R, Is, St1);
{Other,_}=Res when is_atom(Other) ->
Res
end;
check_liveness(R, [{label,_}|Is], St) ->
check_liveness(R, Is, St);
check_liveness(R, [{test,_,{f,Fail},As}|Is], St0) ->
case member(R, As) of
true ->
{used,St0};
false ->
case check_liveness_at(R, Fail, St0) of
{killed,St1} ->
check_liveness(R, Is, St1);
{not_used,St1} ->
not_used(check_liveness(R, Is, St1));
{used,_}=Used ->
Used
end
end;
check_liveness(R, [{test,Op,Fail,Live,Ss,Dst}|Is], St) ->
%% Check this instruction as a block to get a less conservative
%% result if the caller is is_not_used/3.
Block = [{set,[Dst],Ss,{alloc,Live,{bif,Op,Fail}}}],
check_liveness(R, [{block,Block}|Is], St);
check_liveness(R, [{select,_,R,_,_}|_], St) ->
{used,St};
check_liveness(R, [{select,_,_,Fail,Branches}|_], St) ->
check_liveness_everywhere(R, [Fail|Branches], St);
check_liveness(R, [{jump,{f,F}}|_], St) ->
check_liveness_at(R, F, St);
check_liveness(R, [{case_end,Used}|_], St) ->
check_liveness_ret(R, Used, St);
check_liveness(R, [{badmatch,Used}|_], St) ->
check_liveness_ret(R, Used, St);
check_liveness(_, [if_end|_], St) ->
{killed,St};
check_liveness(R, [{func_info,_,_,Ar}|_], St) ->
case R of
{x,X} when X < Ar -> {used,St};
_ -> {killed,St}
end;
check_liveness(R, [{kill,R}|_], St) ->
{killed,St};
check_liveness(R, [{kill,_}|Is], St) ->
check_liveness(R, Is, St);
check_liveness(R, [{bs_init,_,_,none,Ss,Dst}|Is], St) ->
case member(R, Ss) of
true ->
{used,St};
false ->
if
R =:= Dst -> {killed,St};
true -> check_liveness(R, Is, St)
end
end;
check_liveness(R, [{bs_init,_,_,Live,Ss,Dst}|Is], St) ->
case R of
{x,X} ->
case X < Live orelse member(R, Ss) of
true -> {used,St};
false -> {killed,St}
end;
{y,_} ->
case member(R, Ss) of
true -> {used,St};
false ->
if
R =:= Dst -> {killed,St};
true -> check_liveness(R, Is, St)
end
end
end;
check_liveness(R, [{deallocate,_}|Is], St) ->
case R of
{y,_} -> {killed,St};
_ -> check_liveness(R, Is, St)
end;
check_liveness({x,_}=R, [return|_], St) ->
case R of
{x,0} -> {used,St};
{x,_} -> {killed,St}
end;
check_liveness(R, [{call,Live,_}|Is], St) ->
case R of
{x,X} when X < Live -> {used,St};
{x,_} -> {killed,St};
{y,_} -> not_used(check_liveness(R, Is, St))
end;
check_liveness(R, [{call_ext,Live,_}=I|Is], St) ->
case R of
{x,X} when X < Live ->
{used,St};
{x,_} ->
{killed,St};
{y,_} ->
case beam_jump:is_exit_instruction(I) of
false ->
not_used(check_liveness(R, Is, St));
true ->
%% We must make sure we don't check beyond this
%% instruction or we will fall through into random
%% unrelated code and get stuck in a loop.
{killed,St}
end
end;
check_liveness(R, [{call_fun,Live}|Is], St) ->
case R of
{x,X} when X =< Live -> {used,St};
{x,_} -> {killed,St};
{y,_} -> not_used(check_liveness(R, Is, St))
end;
check_liveness(R, [{apply,Args}|Is], St) ->
case R of
{x,X} when X < Args+2 -> {used,St};
{x,_} -> {killed,St};
{y,_} -> not_used(check_liveness(R, Is, St))
end;
check_liveness(R, [{bif,Op,Fail,Ss,D}|Is], St) ->
Set = {set,[D],Ss,{bif,Op,Fail}},
check_liveness(R, [{block,[Set]}|Is], St);
check_liveness(R, [{gc_bif,Op,{f,Fail},Live,Ss,D}|Is], St) ->
Set = {set,[D],Ss,{alloc,Live,{gc_bif,Op,Fail}}},
check_liveness(R, [{block,[Set]}|Is], St);
check_liveness(R, [{bs_put,{f,0},_,Ss}|Is], St) ->
case member(R, Ss) of
true -> {used,St};
false -> check_liveness(R, Is, St)
end;
check_liveness(R, [{bs_restore2,S,_}|Is], St) ->
case R of
S -> {used,St};
_ -> check_liveness(R, Is, St)
end;
check_liveness(R, [{bs_save2,S,_}|Is], St) ->
case R of
S -> {used,St};
_ -> check_liveness(R, Is, St)
end;
check_liveness(R, [{move,S,D}|Is], St) ->
case R of
S -> {used,St};
D -> {killed,St};
_ -> check_liveness(R, Is, St)
end;
check_liveness(R, [{make_fun2,_,_,_,NumFree}|Is], St) ->
case R of
{x,X} when X < NumFree -> {used,St};
{x,_} -> {killed,St};
{y,_} -> not_used(check_liveness(R, Is, St))
end;
check_liveness({x,_}=R, [{'catch',_,_}|Is], St) ->
%% All x registers will be killed if an exception occurs.
%% Therefore we only need to check the liveness for the
%% instructions following the catch instruction.
check_liveness(R, Is, St);
check_liveness({x,_}=R, [{'try',_,_}|Is], St) ->
%% All x registers will be killed if an exception occurs.
%% Therefore we only need to check the liveness for the
%% instructions inside the 'try' block.
check_liveness(R, Is, St);
check_liveness(R, [{try_end,Y}|Is], St) ->
case R of
Y ->
{killed,St};
{y,_} ->
%% y registers will be used if an exception occurs and
%% control transfers to the label given in the previous
%% try/2 instruction.
{used,St};
_ ->
check_liveness(R, Is, St)
end;
check_liveness(R, [{catch_end,Y}|Is], St) ->
case R of
Y -> {killed,St};
_ -> check_liveness(R, Is, St)
end;
check_liveness(R, [{get_tuple_element,S,_,D}|Is], St) ->
case R of
S -> {used,St};
D -> {killed,St};
_ -> check_liveness(R, Is, St)
end;
check_liveness(R, [{bs_context_to_binary,S}|Is], St) ->
case R of
S -> {used,St};
_ -> check_liveness(R, Is, St)
end;
check_liveness(R, [{loop_rec,{f,_},{x,0}}|_], St) ->
case R of
{x,_} ->
{killed,St};
_ ->
%% y register. Rarely happens. Be very conversative and
%% assume it's used.
{used,St}
end;
check_liveness(R, [{loop_rec_end,{f,Fail}}|_], St) ->
check_liveness_at(R, Fail, St);
check_liveness(R, [{line,_}|Is], St) ->
check_liveness(R, Is, St);
check_liveness(R, [{get_map_elements,{f,Fail},S,{list,L}}|Is], St0) ->
{Ss,Ds} = split_even(L),
case member(R, [S|Ss]) of
true ->
{used,St0};
false ->
case check_liveness_at(R, Fail, St0) of
{killed,St}=Killed ->
case member(R, Ds) of
true -> Killed;
false -> check_liveness(R, Is, St)
end;
Other ->
Other
end
end;
check_liveness(R, [{put_map,F,Op,S,D,Live,{list,Puts}}|Is], St) ->
Set = {set,[D],[S|Puts],{alloc,Live,{put_map,Op,F}}},
check_liveness(R, [{block,[Set]}||Is], St);
check_liveness(R, [{test_heap,N,Live}|Is], St) ->
I = {block,[{set,[],[],{alloc,Live,{nozero,nostack,N,[]}}}]},
check_liveness(R, [I|Is], St);
check_liveness(R, [{allocate_zero,N,Live}|Is], St) ->
I = {block,[{set,[],[],{alloc,Live,{zero,N,0,[]}}}]},
check_liveness(R, [I|Is], St);
check_liveness(R, [{get_list,S,D1,D2}|Is], St) ->
I = {block,[{set,[D1,D2],[S],get_list}]},
check_liveness(R, [I|Is], St);
check_liveness(_R, Is, St) when is_list(Is) ->
%% Not implemented. Conservatively assume that the register is used.
{used,St}.
check_liveness_everywhere(R, Lbls, St0) ->
check_liveness_everywhere_1(R, Lbls, killed, St0).
check_liveness_everywhere_1(R, [{f,Lbl}|T], Res0, St0) ->
{Res1,St} = check_liveness_at(R, Lbl, St0),
Res = case Res1 of
killed -> Res0;
_ -> Res1
end,
case Res of
used -> {used,St};
_ -> check_liveness_everywhere_1(R, T, Res, St)
end;
check_liveness_everywhere_1(R, [_|T], Res, St) ->
check_liveness_everywhere_1(R, T, Res, St);
check_liveness_everywhere_1(_, [], Res, St) ->
{Res,St}.
check_liveness_at(R, Lbl, #live{lbl=Ll,res=ResMemorized}=St0) ->
case gb_trees:lookup(Lbl, ResMemorized) of
{value,Res} ->
{Res,St0};
none ->
{Res,St} = case gb_trees:lookup(Lbl, Ll) of
{value,Is} -> check_liveness(R, Is, St0);
none -> {used,St0}
end,
{Res,St#live{res=gb_trees:insert(Lbl, Res, St#live.res)}}
end.
not_used({killed,St}) -> {not_used,St};
not_used({_,_}=Res) -> Res.
check_liveness_ret(R, R, St) -> {used,St};
check_liveness_ret(_, _, St) -> {killed,St}.
%% check_liveness_block(Reg, [Instruction], State) ->
%% {killed | not_used | used | transparent,State'}
%% Finds out how Reg is used in the instruction sequence inside a block.
%% Returns one of:
%% killed - Reg is assigned a new value or killed by an
%% allocation instruction
%% not_used - The value is not used, but the register is referenced
%% e.g. by an allocation instruction
%% transparent - Reg is neither used nor killed
%% used - Reg is explicitly used by an instruction
%%
%% '%live' annotations are not allowed.
%%
%% (Unknown instructions will cause an exception.)
check_liveness_block({x,X}=R, [{set,Ds,Ss,{alloc,Live,Op}}|Is], St0) ->
if
X >= Live ->
{killed,St0};
true ->
case check_liveness_block_1(R, Ss, Ds, Op, Is, St0) of
{killed,St} -> {not_used,St};
{transparent,St} -> {not_used,St};
{_,_}=Res -> Res
end
end;
check_liveness_block({y,_}=R, [{set,Ds,Ss,{alloc,_Live,Op}}|Is], St) ->
check_liveness_block_1(R, Ss, Ds, Op, Is, St);
check_liveness_block(R, [{set,Ds,Ss,Op}|Is], St) ->
check_liveness_block_1(R, Ss, Ds, Op, Is, St);
check_liveness_block(_, [], St) -> {transparent,St}.
check_liveness_block_1(R, Ss, Ds, Op, Is, St0) ->
case member(R, Ss) of
true ->
{used,St0};
false ->
case check_liveness_block_2(R, Op, Ss, St0) of
{killed,St} ->
case member(R, Ds) of
true -> {killed,St};
false -> check_liveness_block(R, Is, St)
end;
{not_used,St} ->
not_used(case member(R, Ds) of
true -> {killed,St};
false -> check_liveness_block(R, Is, St)
end);
{used,St} ->
{used,St}
end
end.
check_liveness_block_2(R, {gc_bif,_Op,{f,Lbl}}, _Ss, St) ->
check_liveness_block_3(R, Lbl, St);
check_liveness_block_2(R, {bif,Op,{f,Lbl}}, Ss, St) ->
Arity = length(Ss),
case erl_internal:comp_op(Op, Arity) orelse
erl_internal:new_type_test(Op, Arity) of
true ->
{killed,St};
false ->
check_liveness_block_3(R, Lbl, St)
end;
check_liveness_block_2(R, {put_map,_Op,{f,Lbl}}, _Ss, St) ->
check_liveness_block_3(R, Lbl, St);
check_liveness_block_2(_, _, _, St) ->
{killed,St}.
check_liveness_block_3(_, 0, St) ->
{killed,St};
check_liveness_block_3(R, Lbl, St0) ->
check_liveness_at(R, Lbl, St0).
index_labels_1([{label,Lbl}|Is0], Acc) ->
Is = drop_labels(Is0),
index_labels_1(Is0, [{Lbl,Is}|Acc]);
index_labels_1([_|Is], Acc) ->
index_labels_1(Is, Acc);
index_labels_1([], Acc) -> gb_trees:from_orddict(sort(Acc)).
drop_labels([{label,_}|Is]) -> drop_labels(Is);
drop_labels(Is) -> Is.
%% Help functions for combine_heap_needs.
combine_alloc_lists(Al1, Al2) ->
combine_alloc_lists_1(sort(Al1++Al2)).
combine_alloc_lists_1([{words,W1},{words,W2}|T])
when is_integer(W1), is_integer(W2) ->
[{words,W1+W2}|combine_alloc_lists_1(T)];
combine_alloc_lists_1([{floats,F1},{floats,F2}|T])
when is_integer(F1), is_integer(F2) ->
[{floats,F1+F2}|combine_alloc_lists_1(T)];
combine_alloc_lists_1([{words,_}=W|T]) ->
[W|combine_alloc_lists_1(T)];
combine_alloc_lists_1([{floats,_}=F|T]) ->
[F|combine_alloc_lists_1(T)];
combine_alloc_lists_1([]) -> [].
%% live_opt/4.
%% Bit syntax instructions.
live_opt([{bs_context_to_binary,Src}=I|Is], Regs0, D, Acc) ->
Regs = x_live([Src], Regs0),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{bs_init,Fail,_,none,Ss,Dst}=I|Is], Regs0, D, Acc) ->
Regs1 = x_live(Ss, x_dead([Dst], Regs0)),
Regs = live_join_label(Fail, D, Regs1),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{bs_init,Fail,Info,Live0,Ss,Dst}|Is], Regs0, D, Acc) ->
Regs1 = x_dead([Dst], Regs0),
Live = live_regs(Regs1),
true = Live =< Live0, %Assertion.
Regs2 = live_call(Live),
Regs3 = x_live(Ss, Regs2),
Regs = live_join_label(Fail, D, Regs3),
I = {bs_init,Fail,Info,Live,Ss,Dst},
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{bs_put,Fail,_,Ss}=I|Is], Regs0, D, Acc) ->
Regs1 = x_live(Ss, Regs0),
Regs = live_join_label(Fail, D, Regs1),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{bs_restore2,Src,_}=I|Is], Regs0, D, Acc) ->
Regs = x_live([Src], Regs0),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{bs_save2,Src,_}=I|Is], Regs0, D, Acc) ->
Regs = x_live([Src], Regs0),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{test,bs_start_match2,Fail,Live,[Src,_],_}=I|Is], _, D, Acc) ->
Regs0 = live_call(Live),
Regs1 = x_live([Src], Regs0),
Regs = live_join_label(Fail, D, Regs1),
live_opt(Is, Regs, D, [I|Acc]);
%% Other instructions.
live_opt([{block,Bl0}|Is], Regs0, D, Acc) ->
Live0 = {'%live',live_regs(Regs0),Regs0},
{Bl,Regs} = live_opt_block(reverse(Bl0), Regs0, D, [Live0]),
Live = {'%live',live_regs(Regs),Regs},
live_opt(Is, Regs, D, [{block,[Live|Bl]}|Acc]);
live_opt([{label,L}=I|Is], Regs, D0, Acc) ->
D = gb_trees:insert(L, Regs, D0),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{jump,{f,L}}=I|Is], _, D, Acc) ->
Regs = gb_trees:get(L, D),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([return=I|Is], _, D, Acc) ->
live_opt(Is, 1, D, [I|Acc]);
live_opt([{catch_end,_}=I|Is], _, D, Acc) ->
live_opt(Is, live_call(1), D, [I|Acc]);
live_opt([{badmatch,Src}=I|Is], _, D, Acc) ->
Regs = x_live([Src], 0),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{case_end,Src}=I|Is], _, D, Acc) ->
Regs = x_live([Src], 0),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{try_case_end,Src}=I|Is], _, D, Acc) ->
Regs = x_live([Src], 0),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([if_end=I|Is], _, D, Acc) ->
Regs = 0,
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{call,Arity,_}=I|Is], _, D, Acc) ->
live_opt(Is, live_call(Arity), D, [I|Acc]);
live_opt([{call_ext,Arity,_}=I|Is], _, D, Acc) ->
live_opt(Is, live_call(Arity), D, [I|Acc]);
live_opt([{call_fun,Arity}=I|Is], _, D, Acc) ->
live_opt(Is, live_call(Arity+1), D, [I|Acc]);
live_opt([{apply,Arity}=I|Is], _, D, Acc) ->
live_opt(Is, live_call(Arity+2), D, [I|Acc]);
live_opt([{make_fun2,_,_,_,Arity}=I|Is], _, D, Acc) ->
live_opt(Is, live_call(Arity), D, [I|Acc]);
live_opt([{test,_,Fail,Ss}=I|Is], Regs0, D, Acc) ->
Regs1 = x_live(Ss, Regs0),
Regs = live_join_label(Fail, D, Regs1),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{test,_,Fail,Live,Ss,_}=I|Is], _, D, Acc) ->
Regs0 = live_call(Live),
Regs1 = x_live(Ss, Regs0),
Regs = live_join_label(Fail, D, Regs1),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{select,_,Src,Fail,List}=I|Is], Regs0, D, Acc) ->
Regs1 = x_live([Src], Regs0),
Regs = live_join_labels([Fail|List], D, Regs1),
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{try_case,_}=I|Is], _, D, Acc) ->
live_opt(Is, live_call(1), D, [I|Acc]);
live_opt([{loop_rec,_Fail,_Dst}=I|Is], _, D, Acc) ->
live_opt(Is, 0, D, [I|Acc]);
live_opt([timeout=I|Is], _, D, Acc) ->
live_opt(Is, 0, D, [I|Acc]);
live_opt([{wait,_}=I|Is], _, D, Acc) ->
live_opt(Is, 0, D, [I|Acc]);
live_opt([{get_map_elements,Fail,Src,{list,List}}=I|Is], Regs0, D, Acc) ->
{Ss,Ds} = split_even(List),
Regs1 = x_live([Src|Ss], x_dead(Ds, Regs0)),
Regs = live_join_label(Fail, D, Regs1),
live_opt(Is, Regs, D, [I|Acc]);
%% Transparent instructions - they neither use nor modify x registers.
live_opt([{deallocate,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{kill,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{try_end,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{loop_rec_end,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{wait_timeout,_,nil}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{wait_timeout,_,{Tag,_}}=I|Is], Regs, D, Acc) when Tag =/= x ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{line,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
%% The following instructions can occur if the "compilation" has been
%% started from a .S file using the 'from_asm' option.
live_opt([{trim,_,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{'%',_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{recv_set,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([{recv_mark,_}=I|Is], Regs, D, Acc) ->
live_opt(Is, Regs, D, [I|Acc]);
live_opt([], _, _, Acc) -> Acc.
live_opt_block([{set,Ds,Ss,Op}=I0|Is], Regs0, D, Acc) ->
Regs1 = x_live(Ss, x_dead(Ds, Regs0)),
{I,Regs} = case Op of
{alloc,Live0,Alloc} ->
%% The life-time analysis used by the code generator
%% is sometimes too conservative, so it may be
%% possible to lower the number of live registers
%% based on the exact liveness information.
%% The main benefit is that more optimizations that
%% depend on liveness information (such as the
%% beam_bool and beam_dead passes) may be applied.
Live = live_regs(Regs1),
true = Live =< Live0, %Assertion.
I1 = {set,Ds,Ss,{alloc,Live,Alloc}},
{I1,live_call(Live)};
_ ->
{I0,Regs1}
end,
case Ds of
[{x,X}] ->
case (not is_live(X, Regs0)) andalso Op =:= move of
true ->
live_opt_block(Is, Regs0, D, Acc);
false ->
live_opt_block(Is, Regs, D, [I|Acc])
end;
_ ->
live_opt_block(Is, Regs, D, [I|Acc])
end;
live_opt_block([], Regs, _, Acc) -> {Acc,Regs}.
live_join_labels([{f,L}|T], D, Regs0) when L =/= 0 ->
Regs = gb_trees:get(L, D) bor Regs0,
live_join_labels(T, D, Regs);
live_join_labels([_|T], D, Regs) ->
live_join_labels(T, D, Regs);
live_join_labels([], _, Regs) -> Regs.
live_join_label({f,0}, _, Regs) ->
Regs;
live_join_label({f,L}, D, Regs) ->
gb_trees:get(L, D) bor Regs.
live_call(Live) -> (1 bsl Live) - 1.
live_regs(Regs) ->
live_regs_1(0, Regs).
live_regs_1(N, 0) -> N;
live_regs_1(N, Regs) -> live_regs_1(N+1, Regs bsr 1).
x_dead([{x,N}|Rs], Regs) -> x_dead(Rs, Regs band (bnot (1 bsl N)));
x_dead([_|Rs], Regs) -> x_dead(Rs, Regs);
x_dead([], Regs) -> Regs.
x_live([{x,N}|Rs], Regs) -> x_live(Rs, Regs bor (1 bsl N));
x_live([_|Rs], Regs) -> x_live(Rs, Regs);
x_live([], Regs) -> Regs.
is_live(X, Regs) -> ((Regs bsr X) band 1) =:= 1.
split_even([], Ss, Ds) ->
{reverse(Ss),reverse(Ds)};
split_even([S,D|Rs], Ss, Ds) ->
split_even(Rs, [S|Ss], [D|Ds]).
