%% =====================================================================
%% Licensed under the Apache License, Version 2.0 (the "License"); you may
%% not use this file except in compliance with the License. You may obtain
%% a copy of the License at <http://www.apache.org/licenses/LICENSE-2.0>
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% Alternatively, you may use this file under the terms of the GNU Lesser
%% General Public License (the "LGPL") as published by the Free Software
%% Foundation; either version 2.1, or (at your option) any later version.
%% If you wish to allow use of your version of this file only under the
%% terms of the LGPL, you should delete the provisions above and replace
%% them with the notice and other provisions required by the LGPL; see
%% <http://www.gnu.org/licenses/>. If you do not delete the provisions
%% above, a recipient may use your version of this file under the terms of
%% either the Apache License or the LGPL.
%%
%% @private
%% @copyright 2001-2003 Richard Carlsson
%% @author Richard Carlsson <[email protected]>
%% @see edoc
%% @end
%% =====================================================================
%% @doc EDoc wiki expansion, parsing and postprocessing of XML text.
%% Uses {@link //xmerl. XMerL}.
%% @end
%% Notes:
%%
%% * Whatever happens in this module, it must interact nicely with the
%% actual XML-parsing. It is not acceptable to break any existing and
%% legal XML markup so that it does not parse or is rendered wrong.
%%
%% * The focus should always be on making *documentation* easier to
%% write. No wiki notation should be introduced unless it is clear that
%% it is better than using plain XHTML, making typing less cumbersome
%% and the resulting text easier to read. The wiki notation should be a
%% small bag of easy-to-remember tricks for making XHTML documentation
%% easier to write, not a complete markup language in itself. As a
%% typical example, it is hardly worthwile to introduce a special
%% notation like say, ""..."" for emphasized text, since <em>...</em> is
%% not much harder to write, not any less readable, and no more
%% difficult to remember, especially since emphasis is not very often
%% occurring in normal documentation.
%%
%% * The central reasoning for the code-quoting goes like this: I don't
%% want to have special escape characters within the quotes (like
%% backslash in C), to allow quoting of the quote characters themselves.
%% I also don't want to use the "`" character both for opening and
%% closing quotes. Therefore, you can either use `...' - and then you
%% cannot use the "'" character without ending the quote - or you can
%% use ``...'' - which allows single but not double "'" characters
%% within the quote. Whitespace is automatically removed from the
%% beginning and the end of the quoted strings; this allows you to write
%% things like "`` 'foo@bar' ''". Text that contains "''" has to be
%% written within <code>...</code>.
%%
%% To produce a single "`" character without starting a quote, write
%% "`'" (no space between "`" and "'").
%%
%% For verbatim/preformatted text, the ```...'''-quotes expand to
%% "<pre><![CDATA[...]]></pre>". The indentation at the start of the
%% quoted string is preserved; whitespace is stripped only at the end.
%% Whole leading lines of whitespace are however skipped.
-module(edoc_wiki).
-export([parse_xml/2, expand_text/2]).
-include("edoc.hrl").
-include_lib("xmerl/include/xmerl.hrl").
-define(BASE_HEADING, 3).
%% Parsing Wiki-XML with pre-and post-expansion.
parse_xml(Data, Line) ->
par(parse_xml_1(expand_text(Data, Line), Line)).
parse_xml_1(Text, Line) ->
Text1 = "<doc>" ++ Text ++ "</doc>",
%% Any coding except "utf-8".
Opts = [{line, Line}, {encoding, 'iso-8859-1'}],
case catch {ok, xmerl_scan:string(Text1, Opts)} of
{ok, {E, _}} ->
E#xmlElement.content;
{'EXIT', {fatal, {Reason, L, _C}}} ->
throw_error(L, {"XML parse error: ~p.", [Reason]});
{'EXIT', Reason} ->
throw_error(Line, {"error in XML parser: ~P.", [Reason, 10]});
Other ->
throw_error(Line, {"nocatch in XML parser: ~P.", [Other, 10]})
end.
%% Expand wiki stuff in arbitrary text.
expand_text(Cs, L) ->
lists:reverse(expand_new_line(Cs, L, [])).
%% Interestingly, the reverse of "code" is "edoc". :-)
expand_new_line([$\s = C | Cs], L, As) ->
expand_new_line(Cs, L, [C | As]);
expand_new_line([$\t = C | Cs], L, As) ->
expand_new_line(Cs, L, [C | As]);
expand_new_line([$\n = C | Cs], L, As) ->
expand_new_line(Cs, L + 1, [C | As]);
expand_new_line([$=, $=, $=, $= | Cs], L, As) ->
expand_heading(Cs, 2, L, As);
expand_new_line([$=, $=, $= | Cs], L, As) ->
expand_heading(Cs, 1, L, As);
expand_new_line([$=, $= | Cs], L, As) ->
expand_heading(Cs, 0, L, As);
expand_new_line(Cs, L, As) ->
expand(Cs, L, As).
expand([$`, $' | Cs], L, As) ->
expand(Cs, L, [$` | As]); % produce "`" - don't start a new quote
expand([$`, $`, $` | Cs], L, As) ->
%% If this is the first thing on the line, compensate for the
%% indentation, unless we had to skip one or more empty lines.
{Cs1, Skipped} = strip_empty_lines(Cs), % avoid vertical space
N = if Skipped > 0 ->
0;
true ->
{As1, _} = edoc_lib:split_at(As, $\n),
case edoc_lib:is_space(As1) of
true -> 3 + length(As1);
false -> 2 % nice default - usually right.
end
end,
Ss = lists:duplicate(N, $\s),
expand_triple(Cs1, L + Skipped, Ss ++ "[ATADC[!<>erp<" ++ As);
expand([$`, $` | Cs], L, As) ->
expand_double(edoc_lib:strip_space(Cs), L, ">edoc<" ++ As);
expand([$` | Cs], L, As) ->
expand_single(edoc_lib:strip_space(Cs), L, ">edoc<" ++ As);
expand([$[ | Cs], L, As) ->
expand_uri(Cs, L, As);
expand([$\n = C | Cs], L, As) ->
expand_new_line(Cs, L + 1, [C | As]);
expand([C | Cs], L, As) ->
expand(Cs, L, [C | As]);
expand([], _, As) ->
As.
%% == Heading ==
%% === SubHeading ===
%% ==== SubSubHeading ====
expand_heading([$= | _] = Cs, N, L, As) ->
expand_heading_1(Cs, N, L, As);
expand_heading(Cs, N, L, As) ->
{Cs1, Cs2} = edoc_lib:split_at(Cs, $\n),
case edoc_lib:strip_space(lists:reverse(Cs1)) of
[$=, $= | Cs3] ->
{Es, Ts} = lists:splitwith(fun (X) -> X =:= $= end, Cs3),
if length(Es) =:= N ->
Ts1 = edoc_lib:strip_space(
lists:reverse(edoc_lib:strip_space(Ts))),
expand_heading_2(Ts1, Cs2, N, L, As);
true ->
H1 = lists:duplicate(N+2, $=),
H2 = "==" ++ Es,
throw_error(L, {"heading end marker mismatch: "
"~s...~s", [H1, H2]})
end;
_ ->
expand_heading_1(Cs, N, L, As)
end.
expand_heading_1(Cs, N, L, As) ->
expand(Cs, L, lists:duplicate(N + 2, $=) ++ As).
expand_heading_2(Ts, Cs, N, L, As) ->
H = ?BASE_HEADING + N,
Ts1 = io_lib:format("<h~w><a name=\"~ts\">~ts</a></h~w>\n",
[H, make_label(Ts), Ts, H]),
expand_new_line(Cs, L + 1, lists:reverse(lists:flatten(Ts1), As)).
make_label([$\s | Cs]) ->
[$_ | make_label(edoc_lib:strip_space(Cs))];
make_label([$\t | Cs]) ->
[$_ | make_label(edoc_lib:strip_space(Cs))];
make_label([$\n | Cs]) ->
[$_ | make_label(edoc_lib:strip_space(Cs))];
make_label([C | Cs]) ->
[C | make_label(Cs)];
make_label([]) ->
[].
%% `...'
expand_single(Cs, L, As) ->
expand_single(Cs, L, As, L).
expand_single([$' | Cs], L, As, _L0) ->
expand(Cs, L, ">edoc/<" ++ edoc_lib:strip_space(As));
expand_single([$< | Cs], L, As, L0) ->
expand_single(Cs, L, ";tl&" ++ As, L0);
expand_single([$> | Cs], L, As, L0) ->
expand_single(Cs, L, ";tg&" ++ As, L0);
expand_single([$& | Cs], L, As, L0) ->
expand_single(Cs, L, ";pma&" ++ As, L0);
expand_single([$\n = C | Cs], L, As, L0) ->
expand_single(Cs, L + 1, [C | As], L0);
expand_single([C | Cs], L, As, L0) ->
expand_single(Cs, L, [C | As], L0);
expand_single([], L, _, L0) ->
throw_error(L0, {"`-quote ended unexpectedly at line ~w", [L]}).
%% ``...''
expand_double(Cs, L, As) ->
expand_double(Cs, L, As, L).
expand_double([$', $' | Cs], L, As, _L0) ->
expand(Cs, L, ">edoc/<" ++ edoc_lib:strip_space(As));
expand_double([$< | Cs], L, As, L0) ->
expand_double(Cs, L, ";tl&" ++ As, L0);
expand_double([$> | Cs], L, As, L0) ->
expand_double(Cs, L, ";tg&" ++ As, L0);
expand_double([$& | Cs], L, As, L0) ->
expand_double(Cs, L, ";pma&" ++ As, L0);
expand_double([$\n = C | Cs], L, As, L0) ->
expand_double(Cs, L + 1, [C | As], L0);
expand_double([C | Cs], L, As, L0) ->
expand_double(Cs, L, [C | As], L0);
expand_double([], L, _, L0) ->
throw_error(L0, {"``-quote ended unexpectedly at line ~w", [L]}).
%% ```...'''
expand_triple(Cs, L, As) ->
expand_triple(Cs, L, As, L).
expand_triple([$', $', $' | Cs], L, As, _L0) -> % ' stupid emacs
expand(Cs, L, ">erp/<>]]" ++ edoc_lib:strip_space(As));
expand_triple([$], $], $> | Cs], L, As, L0) ->
expand_triple(Cs, L, ";tg&]]" ++ As, L0);
expand_triple([$\n = C | Cs], L, As, L0) ->
expand_triple(Cs, L + 1, [C | As], L0);
expand_triple([C | Cs], L, As, L0) ->
expand_triple(Cs, L, [C | As], L0);
expand_triple([], L, _, L0) ->
throw_error(L0, {"```-quote ended unexpectedly at line ~w", [L]}).
%% e.g. [file:/...] or [http://... LinkText]
expand_uri("http:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:ptth", As);
expand_uri("https:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:sptth", As);
expand_uri("ftp:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:ptf", As);
expand_uri("file:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:elif", As);
expand_uri("mailto:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:otliam", As);
expand_uri("nfs:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:sfn", As);
expand_uri("shttp:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:ptths", As);
expand_uri("xmpp:/" ++ Cs, L, As) ->
expand_uri(Cs, L, "/:ppmx", As);
expand_uri(Cs, L, As) ->
expand(Cs, L, [$[ | As]).
expand_uri([$] | Cs], L, Us, As) ->
expand(Cs, L, push_uri(Us, ">tt/<" ++ Us ++ ">tt<", As));
expand_uri([$\s = C | Cs], L, Us, As) ->
expand_uri(Cs, 0, L, [C], Us, As);
expand_uri([$\t = C | Cs], L, Us, As) ->
expand_uri(Cs, 0, L, [C], Us, As);
expand_uri([$\n = C | Cs], L, Us, As) ->
expand_uri(Cs, 1, L, [C], Us, As);
expand_uri([C | Cs], L, Us, As) ->
expand_uri(Cs, L, [C | Us], As);
expand_uri([], L, Us, _As) ->
expand_uri_error(Us, L).
expand_uri([$] | Cs], N, L, Ss, Us, As) ->
Ss1 = lists:reverse(edoc_lib:strip_space(
lists:reverse(edoc_lib:strip_space(Ss)))),
expand(Cs, L + N, push_uri(Us, Ss1, As));
expand_uri([$\n = C | Cs], N, L, Ss, Us, As) ->
expand_uri(Cs, N + 1, L, [C | Ss], Us, As);
expand_uri([C | Cs], N, L, Ss, Us, As) ->
expand_uri(Cs, N, L, [C | Ss], Us, As);
expand_uri([], _, L, _Ss, Us, _As) ->
expand_uri_error(Us, L).
-spec expand_uri_error(list(), pos_integer()) -> no_return().
expand_uri_error(Us, L) ->
{Ps, _} = edoc_lib:split_at(lists:reverse(Us), $:),
throw_error(L, {"reference '[~ts:...' ended unexpectedly", [Ps]}).
push_uri(Us, Ss, As) ->
">a/<" ++ Ss ++ ">\"pot_\"=tegrat \"" ++ Us ++ "\"=ferh a<" ++ As.
strip_empty_lines(Cs) ->
strip_empty_lines(Cs, 0).
strip_empty_lines([], N) ->
{[], N}; % reached the end of input
strip_empty_lines(Cs, N) ->
{Cs1, Cs2} = edoc_lib:split_at(Cs, $\n),
case edoc_lib:is_space(Cs1) of
true ->
strip_empty_lines(Cs2, N + 1);
false ->
{Cs, N}
end.
%% Scanning element content for paragraph breaks (empty lines).
%% Paragraphs are flushed by block level elements.
par(Es) ->
par(Es, [], []).
par([E=#xmlText{value = Value} | Es], As, Bs) ->
par_text(Value, As, Bs, E, Es);
par([E=#xmlElement{name = Name} | Es], As, Bs) ->
%% (Note that paragraphs may not contain any further block-level
%% elements, including other paragraphs. Tables get complicated.)
case Name of
'p' -> par_flush(Es, [E | As], Bs);
'hr' -> par_flush(Es, [E | As], Bs);
'h1' -> par_flush(Es, [E | As], Bs);
'h2' -> par_flush(Es, [E | As], Bs);
'h3' -> par_flush(Es, [E | As], Bs);
'h4' -> par_flush(Es, [E | As], Bs);
'h5' -> par_flush(Es, [E | As], Bs);
'h6' -> par_flush(Es, [E | As], Bs);
'pre' -> par_flush(Es, [E | As], Bs);
'address' -> par_flush(Es, [E | As], Bs);
'div' -> par_flush(Es, [par_elem(E) | As], Bs);
'blockquote' -> par_flush(Es, [par_elem(E) | As], Bs);
'form' -> par_flush(Es, [par_elem(E) | As], Bs);
'fieldset' -> par_flush(Es, [par_elem(E) | As], Bs);
'noscript' -> par_flush(Es, [par_elem(E) | As], Bs);
'ul' -> par_flush(Es, [par_subelem(E) | As], Bs);
'ol' -> par_flush(Es, [par_subelem(E) | As], Bs);
'dl' -> par_flush(Es, [par_subelem(E) | As], Bs);
'table' -> par_flush(Es, [par_subelem(E) | As], Bs);
_ -> par(Es, [E | As], Bs)
end;
par([E | Es], As, Bs) ->
par(Es, [E | As], Bs);
par([], As, Bs) ->
lists:reverse(As ++ Bs).
par_text(Cs, As, Bs, E, Es) ->
case ptxt(Cs) of
none ->
%% no blank lines: keep this element as it is
par(Es, [E | As], Bs);
{Cs1, Ss, Cs2} ->
Es1 = case Cs1 of
[] -> lists:reverse(As);
_ -> lists:reverse(As, [E#xmlText{value = Cs1}])
end,
Bs0 = case Es1 of
[] -> Bs;
_ -> [#xmlElement{name = p, content = Es1} | Bs]
end,
Bs1 = [#xmlText{value = Ss} | Bs0],
case Cs2 of
[] ->
par(Es, [], Bs1);
_ ->
par_text(Cs2, [], Bs1, #xmlText{value = Cs2}, Es)
end
end.
par_flush(Es, As, Bs) ->
par(Es, [], As ++ Bs).
par_elem(E) ->
E#xmlElement{content = par(E#xmlElement.content)}.
%% Only process content of subelements; ignore immediate content.
par_subelem(E) ->
E#xmlElement{content = par_subelem_1(E#xmlElement.content)}.
par_subelem_1([E=#xmlElement{name = Name} | Es]) ->
E1 = case par_skip(Name) of
true ->
E;
false ->
case par_sub(Name) of
true ->
par_subelem(E);
false ->
par_elem(E)
end
end,
[E1 | par_subelem_1(Es)];
par_subelem_1([E | Es]) ->
[E | par_subelem_1(Es)];
par_subelem_1([]) ->
[].
par_skip('caption') -> true;
par_skip('col') -> true;
par_skip('colgroup') -> true;
par_skip(_) -> false.
par_sub(tr) -> true;
par_sub(thead) -> true;
par_sub(tfoot) -> true;
par_sub(tbody) -> true;
par_sub(_) -> false.
%% scanning text content for a blank line
ptxt(Cs) ->
ptxt(Cs, []).
ptxt([$\n | Cs], As) ->
ptxt_1(Cs, As, [$\n]);
ptxt([C | Cs], As) ->
ptxt(Cs, [C | As]);
ptxt([], _As) ->
none.
%% scanning text following an initial newline
ptxt_1([C=$\s | Cs], As, Ss) ->
ptxt_1(Cs, As, [C | Ss]);
ptxt_1([C=$\t | Cs], As, Ss) ->
ptxt_1(Cs, As, [C | Ss]);
ptxt_1([C=$\n | Cs], As, Ss) ->
%% blank line detected
ptxt_2(Cs, As, [C | Ss]);
ptxt_1(Cs, As, Ss) ->
%% not a blank line
ptxt(Cs, lists:reverse(Ss, As)).
%% collecting whitespace following a blank line
ptxt_2([C=$\s | Cs], As, Ss) ->
ptxt_2(Cs, As, [C | Ss]);
ptxt_2([C=$\t | Cs], As, Ss) ->
ptxt_2(Cs, As, [C | Ss]);
ptxt_2([C=$\n | Cs], As, Ss) ->
ptxt_2(Cs, As, [C | Ss]);
ptxt_2(Cs, As, Ss) ->
%% ended by non-whitespace or end of element
case edoc_lib:is_space(As) of
true ->
{[], lists:reverse(Ss ++ As), Cs};
false ->
{lists:reverse(As), lists:reverse(Ss), Cs}
end.
-spec throw_error(non_neg_integer(), {string(), [_]}) -> no_return().
throw_error(L, D) ->
throw({error, L, D}).
