hipe_x86_encode USAGE GUIDE
Revision 0.4, 2001-10-09
This document describes how to use the hipe_x86_encode.erl module.
Preliminaries
-------------
This is not a tutorial on the x86 architecture. The reader
should be familiar with both the programming model and
the general syntax of instructions and their operands.
The hipe_x86_encode module follows the conventions in the
"Intel Architecture Software Developer's Manual, Volume 2:
Instruction Set Reference" document. In particular, the
order of source and destination operands in instructions
follows Intel's conventions: "add eax,edx" adds edx to eax.
The GNU Assembler "gas" follows the so-called AT&T syntax
which reverses the order of the source and destination operands.
Basic Functionality
-------------------
The hipe_x86_encode module implements the mapping from symbolic x86
instructions to their binary representation, as lists of bytes.
Instructions and operands have to match actual x86 instructions
and operands exactly. The mapping from "abstract" instructions
to correct x86 instructions has to be done before the instructions
are passed to the hipe_x86_encode module. (In HiPE, this mapping
is done by the hipe_x86_assemble module.)
The hipe_x86_encode module handles arithmetic operations on 32-bit
integers, data movement of 8, 16, and 32-bit words, and most
control flow operations. A 32-bit address and operand size process
mode is assumed, which is what Unix and Linux systems use.
Operations and registers related to floating-point, MMX, SIMD, 3dnow!,
or operating system control are not implemented. Segment registers
are supported minimally: a 'prefix_fs' pseudo-instruction can be
used to insert an FS segment register override prefix.
Instruction Syntax
------------------
The function hipe_x86_encode:insn_encode/1 takes an instruction in
symbolic form and translates it to its binary representation,
as a list of bytes.
Symbolic instructions are Erlang terms in the following syntax:
Insn ::= {Op,Opnds}
Op ::= (an Erlang atom)
Opnds ::= {Opnd1,...,Opndn} (n >= 0)
Opnd ::= eax | ax | al | 1 | cl
| {imm32,Imm32} | {imm16,Imm16} | {imm8,Imm8}
| {rm32,RM32} | {rm16,RM16} | {rm8,RM8}
| {rel32,Rel32} | {rel8,Rel8}
| {moffs32,Moffs32} | {moffs16,Moffs16} | {moffs8,Moffs8}
| {cc,CC}
| {reg32,Reg32} | {reg16,Reg16} | {reg8,Reg8}
| {ea,EA}
Imm32 ::= (a 32-bit integer; immediate value)
Imm16 ::= (a 16-bit integer; immediate value)
Imm8 ::= (an 8-bit integer; immediate value)
Rel32 ::= (a 32-bit integer; jump offset)
Rel8 ::= (an 8-bit integer; jump offset)
Moffs32 ::= (a 32-bit integer; address of 32-bit word)
Moffs16 ::= (a 32-bit integer; address of 16-bit word)
Moffs8 ::= (a 32-bit integer; address of 8-bit word)
CC ::= (a 4-bit condition code)
Reg32 ::= (a 3-bit register number of a 32-bit register)
Reg16 ::= (same as Reg32, but the register size is 16 bits)
Reg8 ::= (a 3-bit register number of an 8-bit register)
EA ::= (general operand; a memory cell)
RM32 ::= (general operand; a 32-bit register or memory cell)
RM16 ::= (same as RM32, but the operand size is 16 bits)
RM8 ::= (general operand; an 8-bit register or memory cell)
To construct these terms, the hipe_x86_encode module exports several
helper functions:
cc/1
Converts an atom to a 4-bit condition code.
al/0, cl/0, dl/0, bl/0, ah/0, ch/0, dh/0, bh/0
Returns a 3-bit register number for an 8-bit register.
eax/0, ecx/0, edx/0, ebx/0, esp/0, ebp/0, esi/0, edi/0
Returns a 3-bit register number for a 32- or 16-bit register.
A general operand can be a register or a memory operand.
An x86 memory operand is expressed as an "effective address":
Displacement(Base register,Index register,Scale)
or
[base register] + [(index register) * (scale)] + [displacement]
where the base register is any of the 8 integer registers,
the index register in any of the 8 integer registers except ESP,
scale is 0, 1, 2, or 3 (multiply index with 1, 2, 4, or 8),
and displacement is an 8- or 32-bit offset.
Most components are optional.
An effective address is constructed by calling one of the following
nine functions:
ea_base/1
ea_base(Reg32), where Reg32 is not ESP or EBP,
constructs the EA "(Reg32)", i.e. Reg32.
ea_disp32/1
ea_disp32(Disp32) construct the EA "Disp32"
ea_disp32_base/2
ea_disp32(Disp32, Reg32), where Reg32 is not ESP,
constructs the EA "Disp32(Reg32)", i.e. Reg32+Disp32.
ea_disp8_base/2
This is like ea_disp32_base/2, except the displacement
is 8 bits instead of 32 bits. The CPU will _sign-extend_
the 8-bit displacement to 32 bits before using it.
ea_disp32_sindex/1
ea_disp32_sindex(Disp32) constructs the EA "Disp32",
but uses a longer encoding than ea_disp32/1.
Hint: Don't use this one.
The last four forms use index registers with or without scaling
factors and base registers, so-called "SIBs". To build these, call:
sindex/2
sindex(Scale, Index), where scale is 0, 1, 2, or 3, and
Index is a 32-bit integer register except ESP, constructs
part of a SIB representing "Index * 2^Scale".
sib/1
sib(Reg32) constructs a SIB containing only a base register
and no scaled index, "(Reg32)", i.e. "Reg32".
sib/2
sib(Reg32, sindex(Scale, Index)) constructs a SIB
"(Reg32,Index,Scale)", i.e. "Reg32 + (Index * 2^Scale)".
ea_sib/1
ea_sib(SIB), where SIB's base register is not EBP,
constructs an EA which is that SIB, i.e. "(Base)" or
"(Base,Index,Scale)".
ea_disp32_sib/2
ea_disp32_sib(Disp32, SIB) constructs the EA "Disp32(SIB)",
i.e. "Base+Disp32" or "Base+(Index*2^Scale)+Disp32".
ea_disp32_sindex/2
ea_disp32_sindex(Disp32, Sindex) constructs the EA
"Disp32(,Index,Scale)", i.e. "(Index*2^Scale)+Disp32".
ea_disp8_sib/2
This is just like ea_disp32_sib/2, except the displacement
is 8 bits (with sign-extension).
To construct a general operand, call one of these two functions:
rm_reg/1
rm_reg(Reg) constructs a general operand which is that register.
rm_mem/1
rm_mem(EA) constucts a general operand which is the memory
cell addressed by EA.
A symbolic instruction with name "Op" and the n operands "Opnd1"
to "Opndn" is represented as the tuple
{Op, {Opnd1, ..., Opndn}}
Usage
-----
Once a symbolic instruction "Insn" has been constructed, it can be
translated to binary by calling
insn_encode(Insn)
which returns a list of bytes.
Since x86 instructions have varying size (as opposed to most
RISC machines), there is also a function
insn_sizeof(Insn)
which returns the number of bytes the binary encoding will occupy.
insn_sizeof(Insn) equals length(insn_encode(Insn)), but insn_sizeof
is cheaper to compute. This is useful for two purposes: (1) when
compiling to memory, one needs to know in advance how many bytes of
memory to allocate for a piece of code, and (2) when computing the
relative distance between a jump or call instruction and its target
label.
Examples
--------
1. nop
is constructed as
{nop, {}}
2. add eax,edx (eax := eax + edx)
can be constructed as
{add, {eax, {reg32, hipe_x86_encode:edx()}}}
or as
Reg32 = {reg32, hipe_x86_encode:eax()},
RM32 = {rm32, hipe_x86_encode:rm_reg(hipe_x86_encode:edx())},
{add, {Reg32, RM32}}
3. mov edx,(eax) (edx := MEM[eax])
is constructed as
Reg32 = {reg32, hipe_x86_encode:edx()},
RM32 = {rm32, hipe_x86_encode:rm_reg(hipe_x86_encode:eax())},
{mov, {Reg32, RM32}}
Addendum
--------
The hipe_x86_encode.erl source code is the authoritative reference
for the hipe_x86_encode module.
Please report errors in either hipe_x86_encode.erl or this guide
to [email protected].
