%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2017. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
-module(logger_h_common).
-include("logger_h_common.hrl").
-include("logger_internal.hrl").
-export([log_to_binary/2,
check_common_config/1,
call_cast_or_drop/2,
check_load/1,
limit_burst/1,
kill_if_choked/4,
flush_log_requests/0,
flush_log_requests/1,
handler_exit/2,
cancel_timer/1,
stop_or_restart/3,
overload_levels_ok/1,
error_notify/1,
info_notify/1]).
%%%-----------------------------------------------------------------
%%% Covert log data on any form to binary
-spec log_to_binary(LogEvent,Config) -> LogString when
LogEvent :: logger:log_event(),
Config :: logger:config(),
LogString :: binary().
log_to_binary(#{msg:={report,_},meta:=#{report_cb:=_}}=Log,Config) ->
do_log_to_binary(Log,Config);
log_to_binary(#{msg:={report,_},meta:=Meta}=Log,Config) ->
DefaultReportCb = fun logger:format_otp_report/1,
do_log_to_binary(Log#{meta=>Meta#{report_cb=>DefaultReportCb}},Config);
log_to_binary(Log,Config) ->
do_log_to_binary(Log,Config).
do_log_to_binary(Log,Config) ->
{Formatter,FormatterConfig} = maps:get(formatter,Config),
String = try_format(Log,Formatter,FormatterConfig),
try unicode:characters_to_binary(String)
catch _:_ ->
?LOG_INTERNAL(debug,[{formatter_error,Formatter},
{config,FormatterConfig},
{log_event,Log},
{bad_return_value,String}]),
<<"FORMATTER ERROR: bad_return_value">>
end.
try_format(Log,Formatter,FormatterConfig) ->
try Formatter:format(Log,FormatterConfig)
catch
C:R:S ->
?LOG_INTERNAL(debug,[{formatter_crashed,Formatter},
{config,FormatterConfig},
{log_event,Log},
{reason,
{C,R,logger:filter_stacktrace(?MODULE,S)}}]),
case {?DEFAULT_FORMATTER,#{}} of
{Formatter,FormatterConfig} ->
"DEFAULT FORMATTER CRASHED";
{DefaultFormatter,DefaultConfig} ->
try_format(Log#{msg=>{"FORMATTER CRASH: ~tp",
[maps:get(msg,Log)]}},
DefaultFormatter,DefaultConfig)
end
end.
%%%-----------------------------------------------------------------
%%% Check that the configuration term is valid
check_common_config({toggle_sync_qlen,N}) when is_integer(N) ->
valid;
check_common_config({drop_new_reqs_qlen,N}) when is_integer(N) ->
valid;
check_common_config({flush_reqs_qlen,N}) when is_integer(N) ->
valid;
check_common_config({enable_burst_limit,Bool}) when Bool == true;
Bool == false ->
valid;
check_common_config({burst_limit_size,N}) when is_integer(N) ->
valid;
check_common_config({burst_window_time,N}) when is_integer(N) ->
valid;
check_common_config({enable_kill_overloaded,Bool}) when Bool == true;
Bool == false ->
valid;
check_common_config({handler_overloaded_qlen,N}) when is_integer(N) ->
valid;
check_common_config({handler_overloaded_mem,N}) when is_integer(N) ->
valid;
check_common_config({handler_restart_after,NorA}) when is_integer(NorA);
NorA == never ->
valid;
check_common_config({filesync_repeat_interval,NorA}) when is_integer(NorA);
NorA == no_repeat ->
valid;
check_common_config(_) ->
invalid.
%%%-----------------------------------------------------------------
%%% Overload Protection
call_cast_or_drop(Name, Bin) ->
%% If the handler process is getting overloaded, the log request
%% will be synchronous instead of asynchronous (slows down the
%% logging tempo of a process doing lots of logging. If the
%% handler is choked, drop mode is set and no request will be sent.
try ?get_mode(Name) of
async ->
gen_server:cast(Name, {log,Bin});
sync ->
try gen_server:call(Name, {log,Bin}, ?DEFAULT_CALL_TIMEOUT) of
%% if return value from call == dropped, the
%% message has been flushed by handler and should
%% therefore not be counted as dropped in stats
ok -> ok;
dropped -> ok
catch
_:{timeout,_} ->
?observe(Name,{dropped,1})
end;
drop ->
?observe(Name,{dropped,1})
catch
%% if the ETS table doesn't exist (maybe because of a
%% handler restart), we can only drop the request
_:_ -> ?observe(Name,{dropped,1})
end,
ok.
handler_exit(_Name, Reason) ->
exit(Reason).
check_load(State = #{id:=Name, mode := Mode,
toggle_sync_qlen := ToggleSyncQLen,
drop_new_reqs_qlen := DropNewQLen,
flush_reqs_qlen := FlushQLen}) ->
{_,Mem} = process_info(self(), memory),
?observe(Name,{max_mem,Mem}),
{_,QLen} = process_info(self(), message_queue_len),
?observe(Name,{max_qlen,QLen}),
%% When the handler process gets scheduled in, it's impossible
%% to predict the QLen. We could jump "up" arbitrarily from say
%% async to sync, async to drop, sync to flush, etc. However, when
%% the handler process manages the log requests (without flushing),
%% one after the other, we will move "down" from drop to sync and
%% from sync to async. This way we don't risk getting stuck in
%% drop or sync mode with an empty mailbox.
{Mode1,_NewDrops,_NewFlushes} =
if
QLen >= FlushQLen ->
{flush, 0,1};
QLen >= DropNewQLen ->
%% Note that drop mode will force log requests to
%% be dropped on the client side (never sent get to
%% the handler).
IncDrops = if Mode == drop -> 0; true -> 1 end,
{?change_mode(Name, Mode, drop), IncDrops,0};
QLen >= ToggleSyncQLen ->
{?change_mode(Name, Mode, sync), 0,0};
true ->
{?change_mode(Name, Mode, async), 0,0}
end,
State1 = ?update_other(drops,DROPS,_NewDrops,State),
{Mode1, QLen, Mem,
?update_other(flushes,FLUSHES,_NewFlushes,
State1#{last_qlen => QLen})}.
limit_burst(#{enable_burst_limit := false}) ->
{true,0,0};
limit_burst(#{burst_win_ts := BurstWinT0,
burst_msg_count := BurstMsgCount,
burst_window_time := BurstWinTime,
burst_limit_size := BurstLimitSz}) ->
if (BurstMsgCount >= BurstLimitSz) ->
%% the limit for allowed messages has been reached
BurstWinT1 = ?timestamp(),
case ?diff_time(BurstWinT1,BurstWinT0) of
BurstCheckTime when BurstCheckTime < (BurstWinTime*1000) ->
%% we're still within the burst time frame
{false,BurstWinT0,BurstMsgCount};
_BurstCheckTime ->
%% burst time frame passed, reset counters
{true,BurstWinT1,0}
end;
true ->
%% the limit for allowed messages not yet reached
{true,BurstWinT0,BurstMsgCount+1}
end.
kill_if_choked(Name, QLen, Mem,
#{enable_kill_overloaded := KillIfOL,
handler_overloaded_qlen := HOLQLen,
handler_overloaded_mem := HOLMem}) ->
if KillIfOL andalso
((QLen > HOLQLen) orelse (Mem > HOLMem)) ->
handler_exit(Name, {shutdown,{overloaded,Name,QLen,Mem}});
true ->
ok
end.
flush_log_requests() ->
flush_log_requests(-1).
flush_log_requests(Limit) ->
process_flag(priority, high),
Flushed = flush_log_requests(0, Limit),
process_flag(priority, normal),
Flushed.
flush_log_requests(Limit, Limit) ->
Limit;
flush_log_requests(N, Limit) ->
%% flush log requests but leave other requests, such as
%% file/disk_log_sync, info and change_config, so that these
%% have a chance to be processed even under heavy load
receive
{'$gen_cast',{log,_}} ->
flush_log_requests(N+1, Limit);
{'$gen_call',{Pid,MRef},{log,_}} ->
Pid ! {MRef, dropped},
flush_log_requests(N+1, Limit)
after
0 -> N
end.
cancel_timer(TRef) when is_atom(TRef) -> ok;
cancel_timer(TRef) -> timer:cancel(TRef).
stop_or_restart(Name, {shutdown,Reason={overloaded,_Name,_QLen,_Mem}},
#{handler_restart_after := RestartAfter}) ->
%% If we're terminating because of an overload situation (see
%% logger_h_common:kill_if_choked/4), we need to remove the handler
%% and set a restart timer. A separate process must perform this
%% in order to avoid deadlock.
HandlerPid = self(),
RemoveAndRestart =
fun() ->
MRef = erlang:monitor(process, HandlerPid),
receive
{'DOWN',MRef,_,_,_} ->
ok
after 30000 ->
error_notify(Reason),
exit(HandlerPid, kill)
end,
case logger:get_handler_config(Name) of
{ok,{HMod,HConfig}} when is_integer(RestartAfter) ->
_ = logger:remove_handler(Name),
_ = timer:apply_after(RestartAfter, logger, add_handler,
[Name,HMod,HConfig]);
{ok,_} ->
_ = logger:remove_handler(Name);
{error,CfgReason} when is_integer(RestartAfter) ->
error_notify({Name,restart_impossible,CfgReason});
{error,_} ->
ok
end
end,
spawn(RemoveAndRestart),
ok;
stop_or_restart(Name, shutdown, _State) ->
%% Probably terminated by supervisor. Remove the handler to avoid
%% error printouts due to failing handler.
_ = case logger:get_handler_config(Name) of
{ok,_} ->
%% Spawning to avoid deadlock
spawn(logger,remove_handler,[Name]);
_ ->
ok
end,
ok;
stop_or_restart(_Name, _Reason, _State) ->
ok.
overload_levels_ok(HandlerConfig) ->
TSQL = maps:get(toggle_sync_qlen, HandlerConfig, ?TOGGLE_SYNC_QLEN),
DNRQL = maps:get(drop_new_reqs_qlen, HandlerConfig, ?DROP_NEW_REQS_QLEN),
FRQL = maps:get(flush_reqs_qlen, HandlerConfig, ?FLUSH_REQS_QLEN),
(DNRQL > 1) andalso (TSQL =< DNRQL) andalso (DNRQL =< FRQL).
error_notify(Term) ->
?internal_log(error, Term).
info_notify(Term) ->
?internal_log(info, Term).
