%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2018. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
-module(logger_std_h_SUITE).
-compile(export_all).
-include_lib("common_test/include/ct.hrl").
-include_lib("kernel/include/logger.hrl").
-include_lib("kernel/src/logger_internal.hrl").
-include_lib("kernel/src/logger_h_common.hrl").
-include_lib("stdlib/include/ms_transform.hrl").
-include_lib("kernel/include/file.hrl").
-define(check_no_log, [] = test_server:messages_get()).
-define(check(Expected),
receive
{log,Expected} ->
[] = test_server:messages_get()
after 5000 ->
ct:fail({report_not_received,
{line,?LINE},
{expected,Expected},
{got,test_server:messages_get()}})
end).
-define(msg,"Log from "++atom_to_list(?FUNCTION_NAME)++
":"++integer_to_list(?LINE)).
-define(bin(Msg), list_to_binary(Msg++"\n")).
-define(domain,#{domain=>[?MODULE]}).
-define(FILESYNC_REP_INT, if is_atom(?FILESYNC_REPEAT_INTERVAL) -> 5500;
true -> ?FILESYNC_REPEAT_INTERVAL + 500
end).
suite() ->
[{timetrap,{seconds,30}}].
init_per_suite(Config) ->
timer:start(), % to avoid progress report
{ok,{?STANDARD_HANDLER,#{formatter:=OrigFormatter}}} =
logger:get_handler_config(?STANDARD_HANDLER),
[{formatter,OrigFormatter}|Config].
end_per_suite(Config) ->
{OrigMod,OrigConf} = proplists:get_value(formatter,Config),
logger:set_handler_config(?STANDARD_HANDLER,formatter,{OrigMod,OrigConf}),
ok.
init_per_group(_Group, Config) ->
Config.
end_per_group(_Group, _Config) ->
ok.
init_per_testcase(TestHooksCase, Config) when
TestHooksCase == write_failure;
TestHooksCase == sync_failure ->
if ?TEST_HOOKS_TAB == undefined ->
{skip,"Define the TEST_HOOKS macro to run this test"};
true ->
ct:print("********** ~w **********", [TestHooksCase]),
Config
end;
init_per_testcase(TestCase, Config) ->
ct:print("********** ~w **********", [TestCase]),
Config.
end_per_testcase(Case, Config) ->
try apply(?MODULE,Case,[cleanup,Config])
catch error:undef -> ok
end,
ok.
groups() ->
[].
all() ->
[add_remove_instance_tty,
add_remove_instance_standard_io,
add_remove_instance_standard_error,
add_remove_instance_file1,
add_remove_instance_file2,
default_formatter,
errors,
formatter_fail,
config_fail,
crash_std_h_to_file,
crash_std_h_to_disk_log,
bad_input,
info_and_reset,
reconfig,
file_opts,
filesync,
write_failure,
sync_failure,
op_switch_to_sync_file,
op_switch_to_sync_tty,
op_switch_to_drop_file,
op_switch_to_drop_tty,
op_switch_to_flush_file,
op_switch_to_flush_tty,
limit_burst_disabled,
limit_burst_enabled_one,
limit_burst_enabled_period,
kill_disabled,
qlen_kill_new,
qlen_kill_std,
mem_kill_new,
mem_kill_std,
restart_after,
handler_requests_under_load
].
add_remove_instance_tty(_Config) ->
{error,{handler_not_added,{invalid_config,logger_std_h,{type,tty}}}} =
logger:add_handler(?MODULE,logger_std_h,
#{logger_std_h => #{type => tty},
filter_default=>log,
formatter=>{?MODULE,self()}}),
ok.
add_remove_instance_standard_io(_Config) ->
add_remove_instance_nofile(standard_io).
add_remove_instance_standard_io(cleanup,_Config) ->
logger_std_h_remove().
add_remove_instance_standard_error(_Config) ->
add_remove_instance_nofile(standard_error).
add_remove_instance_standard_error(cleanup,_Config) ->
logger_std_h_remove().
add_remove_instance_file1(Config) ->
Dir = ?config(priv_dir,Config),
Log = filename:join(Dir,"stdlog1.txt"),
Type = {file,Log},
add_remove_instance_file(Log, Type).
add_remove_instance_file1(cleanup,_Config) ->
logger_std_h_remove().
add_remove_instance_file2(Config) ->
Dir = ?config(priv_dir,Config),
Log = filename:join(Dir,"stdlog2.txt"),
Type = {file,Log,[raw,append]},
add_remove_instance_file(Log, Type).
add_remove_instance_file2(cleanup,_Config) ->
logger_std_h_remove().
add_remove_instance_file(Log, Type) ->
ok = logger:add_handler(?MODULE,
logger_std_h,
#{logger_std_h => #{type => Type},
filter_default=>stop,
filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]),
formatter=>{?MODULE,self()}}),
Pid = whereis(?MODULE),
true = is_pid(Pid),
logger:info(M1=?msg,?domain),
?check(M1),
B1 = ?bin(M1),
try_read_file(Log, {ok,B1}, ?FILESYNC_REP_INT),
ok = logger:remove_handler(?MODULE),
timer:sleep(500),
undefined = whereis(?MODULE),
logger:info(?msg,?domain),
?check_no_log,
try_read_file(Log, {ok,B1}, ?FILESYNC_REP_INT),
ok.
default_formatter(_Config) ->
ok = logger:set_handler_config(?STANDARD_HANDLER,formatter,
{?DEFAULT_FORMATTER,?DEFAULT_FORMAT_CONFIG}),
ct:capture_start(),
logger:info(M1=?msg),
timer:sleep(100),
ct:capture_stop(),
[Msg] = ct:capture_get(),
match = re:run(Msg,"=INFO REPORT====.*\n"++M1,[{capture,none}]),
ok.
errors(Config) ->
Dir = ?config(priv_dir,Config),
Log = filename:join(Dir,?FUNCTION_NAME),
ok = logger:add_handler(?MODULE,logger_std_h,#{}),
{error,{already_exist,?MODULE}} =
logger:add_handler(?MODULE,logger_std_h,#{}),
{error,{not_found,no_such_name}} = logger:remove_handler(no_such_name),
ok = logger:remove_handler(?MODULE),
{error,{not_found,?MODULE}} = logger:remove_handler(?MODULE),
{error,
{handler_not_added,
{invalid_config,logger_std_h,{type,faulty_type}}}} =
logger:add_handler(?MODULE,logger_std_h,
#{logger_std_h => #{type => faulty_type}}),
NoDir = lists:concat(["/",?MODULE,"_dir"]),
{error,
{handler_not_added,{{open_failed,NoDir,eacces},_}}} =
logger:add_handler(myh2,logger_std_h,
#{logger_std_h=>#{type=>{file,NoDir}}}),
{error,
{handler_not_added,{{open_failed,Log,_},_}}} =
logger:add_handler(myh3,logger_std_h,
#{logger_std_h=>#{type=>{file,Log,[bad_file_opt]}}}),
ok = logger:info(?msg).
errors(cleanup,_Config) ->
logger:remove_handler(?MODULE).
formatter_fail(Config) ->
Dir = ?config(priv_dir,Config),
Log = filename:join(Dir,?FUNCTION_NAME),
%% no formatter
ok = logger:add_handler(?MODULE,
logger_std_h,
#{logger_std_h => #{type => {file,Log}},
filter_default=>stop,
filters=>?DEFAULT_HANDLER_FILTERS([?MODULE])}),
Pid = whereis(?MODULE),
true = is_pid(Pid),
{ok,#{handlers:=H}} = logger:get_logger_config(),
true = lists:member(?MODULE,H),
%% Formatter is added automatically
{ok,{_,#{formatter:={logger_formatter,_}}}} =
logger:get_handler_config(?MODULE),
logger:info(M1=?msg,?domain),
Got1 = try_match_file(Log,"=INFO REPORT====.*\n"++M1,5000),
ok = logger:set_handler_config(?MODULE,formatter,{nonexistingmodule,#{}}),
logger:info(M2=?msg,?domain),
Got2 = try_match_file(Log,
Got1++"=INFO REPORT====.*\nFORMATTER CRASH: .*"++M2,
5000),
ok = logger:set_handler_config(?MODULE,formatter,{?MODULE,crash}),
logger:info(M3=?msg,?domain),
Got3 = try_match_file(Log,
Got2++"=INFO REPORT====.*\nFORMATTER CRASH: .*"++M3,
5000),
ok = logger:set_handler_config(?MODULE,formatter,{?MODULE,bad_return}),
logger:info(?msg,?domain),
try_match_file(Log,
Got3++"FORMATTER ERROR: bad_return_value",
5000),
%% Check that handler is still alive and was never dead
Pid = whereis(?MODULE),
{ok,#{handlers:=H}} = logger:get_logger_config(),
ok.
formatter_fail(cleanup,_Config) ->
logger:remove_handler(?MODULE).
config_fail(_Config) ->
{error,{handler_not_added,{invalid_config,logger_std_h,{bad,bad}}}} =
logger:add_handler(?MODULE,logger_std_h,
#{logger_std_h => #{bad => bad},
filter_default=>log,
formatter=>{?MODULE,self()}}),
{error,{handler_not_added,{invalid_config,logger_std_h,
{restart_type,bad}}}} =
logger:add_handler(?MODULE,logger_std_h,
#{logger_std_h => #{restart_type => bad},
filter_default=>log,
formatter=>{?MODULE,self()}}),
{error,{handler_not_added,{invalid_levels,{42,42,_}}}} =
logger:add_handler(?MODULE,logger_std_h,
#{logger_std_h => #{toggle_sync_qlen=>42,
drop_new_reqs_qlen=>42}}),
ok = logger:add_handler(?MODULE,logger_std_h,
#{filter_default=>log,
formatter=>{?MODULE,self()}}),
{error,{illegal_config_change,_,_}} =
logger:set_handler_config(?MODULE,logger_std_h,
#{type=>{file,"file"}}),
{error,{illegal_config_change,_,_}} =
logger:set_handler_config(?MODULE,id,bad),
{error,{invalid_levels,_}} =
logger:set_handler_config(?MODULE,logger_std_h,
#{toggle_sync_qlen=>100,
flush_reqs_qlen=>99}),
{error,{invalid_config,logger_std_h,{filesync_rep_int,2000}}} =
logger:set_handler_config(?MODULE, logger_std_h,
#{filesync_rep_int => 2000}),
ok.
config_fail(cleanup,_Config) ->
logger:remove_handler(?MODULE).
crash_std_h_to_file(Config) ->
crash_std_h(Config,?FUNCTION_NAME,logger_dest,file).
crash_std_h_to_file(cleanup,_Config) ->
crash_std_h(cleanup).
crash_std_h_to_disk_log(Config) ->
crash_std_h(Config,?FUNCTION_NAME,logger_dest,disk_log).
crash_std_h_to_disk_log(cleanup,_Config) ->
crash_std_h(cleanup).
crash_std_h(Config,Func,Var,Type) ->
Dir = ?config(priv_dir,Config),
File = lists:concat([?MODULE,"_",Func,".log"]),
Log = filename:join(Dir,File),
Pa = filename:dirname(code:which(?MODULE)),
TypeAndLog =
case os:type() of
{win32,_} ->
lists:concat([" {",Type,",\\\"",Log,"\\\"}"]);
_ ->
lists:concat([" \'{",Type,",\"",Log,"\"}\'"])
end,
Args = lists:concat([" -kernel ",Var,TypeAndLog," -pa ",Pa]),
Name = lists:concat([?MODULE,"_",Func]),
ct:pal("Starting ~p with ~tp", [Name,Args]),
%% Start a node which prints kernel logs to the destination specified by Type
{ok,Node} = test_server:start_node(Name, peer, [{args, Args}]),
Pid = rpc:call(Node,erlang,whereis,[?STANDARD_HANDLER]),
ok = rpc:call(Node,logger,set_handler_config,[?STANDARD_HANDLER,formatter,
{?MODULE,self()}]),
ok = log_on_remote_node(Node,"dummy1"),
?check("dummy1"),
{ok,Bin1} = sync_and_read(Node,Type,Log),
<<"dummy1\n">> = binary:part(Bin1,{byte_size(Bin1),-7}),
%% Kill the logger_std_h process
exit(Pid, kill),
%% Wait a bit, then check that it is gone
timer:sleep(2000),
undefined = rpc:call(Node,erlang,whereis,[?STANDARD_HANDLER]),
%% Check that file is not empty
{ok,Bin2} = sync_and_read(Node,Type,Log),
<<"dummy1\n">> = binary:part(Bin2,{byte_size(Bin2),-7}),
ok.
%% Can not use rpc:call here, since the code would execute on a
%% process with group_leader on this (the calling) node, and thus
%% logger would send the log event to the logger process here instead
%% of logging it itself.
log_on_remote_node(Node,Msg) ->
_ = spawn_link(Node,
fun() -> erlang:group_leader(whereis(user),self()),
logger:info(Msg)
end),
ok.
crash_std_h(cleanup) ->
Nodes = nodes(),
[test_server:stop_node(Node) || Node <- Nodes].
sync_and_read(Node,disk_log,Log) ->
rpc:call(Node,logger_disk_log_h,disk_log_sync,[?STANDARD_HANDLER]),
case file:read_file(Log ++ ".1") of
{ok,<<>>} ->
timer:sleep(5000),
file:read_file(Log ++ ".1");
Ok ->
Ok
end;
sync_and_read(Node,file,Log) ->
rpc:call(Node,logger_std_h,filesync,[?STANDARD_HANDLER]),
case file:read_file(Log) of
{ok,<<>>} ->
timer:sleep(5000),
file:read_file(Log);
Ok ->
Ok
end.
bad_input(_Config) ->
{error,{badarg,{filesync,["BadType"]}}} = logger_std_h:filesync("BadType"),
{error,{badarg,{info,["BadType"]}}} = logger_std_h:info("BadType"),
{error,{badarg,{reset,["BadType"]}}} = logger_std_h:reset("BadType").
info_and_reset(_Config) ->
#{id := ?STANDARD_HANDLER} = logger_std_h:info(?STANDARD_HANDLER),
ok = logger_std_h:reset(?STANDARD_HANDLER).
reconfig(Config) ->
Dir = ?config(priv_dir,Config),
ok = logger:add_handler(?MODULE,
logger_std_h,
#{logger_std_h => #{type => standard_io},
filter_default=>log,
filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]),
formatter=>{?MODULE,self()}}),
#{id := ?MODULE,
type := standard_io,
file_ctrl_pid := FileCtrlPid,
toggle_sync_qlen := ?TOGGLE_SYNC_QLEN,
drop_new_reqs_qlen := ?DROP_NEW_REQS_QLEN,
flush_reqs_qlen := ?FLUSH_REQS_QLEN,
enable_burst_limit := ?ENABLE_BURST_LIMIT,
burst_limit_size := ?BURST_LIMIT_SIZE,
burst_window_time := ?BURST_WINDOW_TIME,
enable_kill_overloaded := ?ENABLE_KILL_OVERLOADED,
handler_overloaded_qlen := ?HANDLER_OVERLOADED_QLEN,
handler_overloaded_mem := ?HANDLER_OVERLOADED_MEM,
handler_restart_after := ?HANDLER_RESTART_AFTER,
filesync_repeat_interval := ?FILESYNC_REPEAT_INTERVAL} =
logger_std_h:info(?MODULE),
ok = logger:set_handler_config(?MODULE, logger_std_h,
#{toggle_sync_qlen => 1,
drop_new_reqs_qlen => 2,
flush_reqs_qlen => 3,
enable_burst_limit => false,
burst_limit_size => 10,
burst_window_time => 10,
enable_kill_overloaded => true,
handler_overloaded_qlen => 100000,
handler_overloaded_mem => 10000000,
handler_restart_after => never,
filesync_repeat_interval => no_repeat}),
#{id := ?MODULE,
type := standard_io,
file_ctrl_pid := FileCtrlPid,
toggle_sync_qlen := 1,
drop_new_reqs_qlen := 2,
flush_reqs_qlen := 3,
enable_burst_limit := false,
burst_limit_size := 10,
burst_window_time := 10,
enable_kill_overloaded := true,
handler_overloaded_qlen := 100000,
handler_overloaded_mem := 10000000,
handler_restart_after := never,
filesync_repeat_interval := no_repeat} = logger_std_h:info(?MODULE),
ok.
reconfig(cleanup, _Config) ->
logger:remove_handler(?MODULE).
file_opts(Config) ->
Dir = ?config(priv_dir,Config),
Log = filename:join(Dir, lists:concat([?FUNCTION_NAME,".log"])),
BadFileOpts = [raw],
BadType = {file,Log,BadFileOpts},
{error,{handler_not_added,{{open_failed,Log,enoent},_}}} =
logger:add_handler(?MODULE, logger_std_h,
#{logger_std_h => #{type => BadType}}),
OkFileOpts = [raw,append],
OkType = {file,Log,OkFileOpts},
ok = logger:add_handler(?MODULE,
logger_std_h,
#{logger_std_h => #{type => OkType},
filter_default=>log,
filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]),
formatter=>{?MODULE,self()}}),
#{type := OkType} = logger_std_h:info(?MODULE),
logger:info(M1=?msg,?domain),
?check(M1),
B1 = ?bin(M1),
try_read_file(Log, {ok,B1}, ?FILESYNC_REP_INT),
ok.
file_opts(cleanup, _Config) ->
logger:remove_handler(?MODULE).
filesync(Config) ->
Dir = ?config(priv_dir,Config),
Log = filename:join(Dir, lists:concat([?FUNCTION_NAME,".log"])),
Type = {file,Log},
ok = logger:add_handler(?MODULE,
logger_std_h,
#{logger_std_h => #{type => Type},
filter_default=>log,
filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]),
formatter=>{?MODULE,self()}}),
Tester = self(),
TraceFun = fun({trace,_,call,{Mod,Func,Details}}, Pid) ->
Pid ! {trace,Mod,Func,Details},
Pid;
({trace,TPid,'receive',Received}, Pid) ->
Pid ! {trace,TPid,Received},
Pid
end,
{ok,_} = dbg:tracer(process, {TraceFun, Tester}),
FileCtrlPid = maps:get(file_ctrl_pid , logger_std_h:info(?MODULE)),
{ok,_} = dbg:p(FileCtrlPid, [c]),
{ok,_} = dbg:tpl(logger_std_h, write_to_dev, 5, []),
{ok,_} = dbg:tpl(logger_std_h, sync_dev, 4, []),
{ok,_} = dbg:tp(file, datasync, 1, []),
logger:info("first", ?domain),
%% wait for automatic filesync
timer:sleep(?FILESYNC_REP_INT),
Expected1 = [{log,"first"}, {trace,logger_std_h,write_to_dev},
{trace,logger_std_h,sync_dev}, {trace,file,datasync}],
logger:info("second", ?domain),
%% do explicit filesync
logger_std_h:filesync(?MODULE),
%% a second filesync should be ignored
logger_std_h:filesync(?MODULE),
Expected2 = [{log,"second"}, {trace,logger_std_h,write_to_dev},
{trace,logger_std_h,sync_dev}, {trace,file,datasync}],
%% check that if there's no repeated filesync active,
%% a filesync is still performed when handler goes idle
logger:set_handler_config(?MODULE, logger_std_h,
#{filesync_repeat_interval => no_repeat}),
no_repeat = maps:get(filesync_repeat_interval, logger_std_h:info(?MODULE)),
logger:info("third", ?domain),
timer:sleep(?IDLE_DETECT_TIME_MSEC*2),
logger:info("fourth", ?domain),
%% wait for automatic filesync
timer:sleep(?IDLE_DETECT_TIME_MSEC*2),
Expected3 = [{log,"third"}, {trace,logger_std_h,write_to_dev},
{log,"fourth"}, {trace,logger_std_h,write_to_dev},
{trace,logger_std_h,sync_dev}, {trace,file,datasync}],
dbg:stop_clear(),
%% verify that filesync has been performed as expected
Received1 = lists:map(fun({trace,M,F,_}) -> {trace,M,F};
(Other) -> Other
end, test_server:messages_get()),
ct:pal("Trace #1 =~n~p", [Received1]),
Received1 = Expected1 ++ Expected2 ++ Expected3,
try_read_file(Log, {ok,<<"first\nsecond\nthird\nfourth\n">>}, 1000),
{ok,_} = dbg:tracer(process, {TraceFun, Tester}),
{ok,_} = dbg:p(whereis(?MODULE), [c]),
{ok,_} = dbg:tpl(logger_std_h, handle_cast, 2, []),
%% switch repeated filesync on and verify that the looping works
SyncInt = 1000,
WaitT = 4500,
logger:set_handler_config(?MODULE, logger_std_h,
#{filesync_repeat_interval => SyncInt}),
SyncInt = maps:get(filesync_repeat_interval, logger_std_h:info(?MODULE)),
timer:sleep(WaitT),
logger:set_handler_config(?MODULE, logger_std_h,
#{filesync_repeat_interval => no_repeat}),
dbg:stop_clear(),
Received2 = lists:map(fun({trace,_M,handle_cast,[{Op,_},_]}) -> {trace,Op};
(Other) -> Other
end, test_server:messages_get()),
ct:pal("Trace #2 =~n~p", [Received2]),
OneSync = [{trace,repeated_filesync}],
%% receive 1 initial repeated_filesync, then 1 per sec
Received2 =
lists:flatten([OneSync || _ <- lists:seq(1, 1 + trunc(WaitT/SyncInt))]),
ok.
filesync(cleanup, _Config) ->
logger:remove_handler(?MODULE).
write_failure(Config) ->
Dir = ?config(priv_dir, Config),
File = lists:concat([?MODULE,"_",?FUNCTION_NAME,".log"]),
Log = filename:join(Dir, File),
Node = start_std_h_on_new_node(Config, ?FUNCTION_NAME, Log),
false = (undefined == rpc:call(Node, ets, whereis, [?TEST_HOOKS_TAB])),
rpc:call(Node, ets, insert, [?TEST_HOOKS_TAB,{tester,self()}]),
rpc:call(Node, ?MODULE, set_internal_log, [?MODULE,internal_log]),
rpc:call(Node, ?MODULE, set_result, [file_write,ok]),
ok = log_on_remote_node(Node, "Logged1"),
rpc:call(Node, logger_std_h, filesync, [?STANDARD_HANDLER]),
?check_no_log,
try_read_file(Log, {ok,<<"Logged1\n">>}, ?FILESYNC_REP_INT),
rpc:call(Node, ?MODULE, set_result, [file_write,{error,terminated}]),
ok = log_on_remote_node(Node, "Cause simple error printout"),
?check({error,{?STANDARD_HANDLER,write,Log,{error,terminated}}}),
ok = log_on_remote_node(Node, "No second error printout"),
?check_no_log,
rpc:call(Node, ?MODULE, set_result, [file_write,{error,eacces}]),
ok = log_on_remote_node(Node, "Cause simple error printout"),
?check({error,{?STANDARD_HANDLER,write,Log,{error,eacces}}}),
rpc:call(Node, ?MODULE, set_result, [file_write,ok]),
ok = log_on_remote_node(Node, "Logged2"),
rpc:call(Node, logger_std_h, filesync, [?STANDARD_HANDLER]),
?check_no_log,
try_read_file(Log, {ok,<<"Logged1\nLogged2\n">>}, ?FILESYNC_REP_INT),
ok.
write_failure(cleanup, _Config) ->
Nodes = nodes(),
[test_server:stop_node(Node) || Node <- Nodes].
sync_failure(Config) ->
Dir = ?config(priv_dir, Config),
File = lists:concat([?MODULE,"_",?FUNCTION_NAME,".log"]),
Log = filename:join(Dir, File),
Node = start_std_h_on_new_node(Config, ?FUNCTION_NAME, Log),
false = (undefined == rpc:call(Node, ets, whereis, [?TEST_HOOKS_TAB])),
rpc:call(Node, ets, insert, [?TEST_HOOKS_TAB,{tester,self()}]),
rpc:call(Node, ?MODULE, set_internal_log, [?MODULE,internal_log]),
rpc:call(Node, ?MODULE, set_result, [file_datasync,ok]),
SyncInt = 500,
ok = rpc:call(Node, logger, set_handler_config,
[?STANDARD_HANDLER, logger_std_h,
#{filesync_repeat_interval => SyncInt}]),
Info = rpc:call(Node, logger_std_h, info, [?STANDARD_HANDLER]),
SyncInt = maps:get(filesync_repeat_interval, Info),
ok = log_on_remote_node(Node, "Logged1"),
?check_no_log,
rpc:call(Node, ?MODULE, set_result, [file_datasync,{error,terminated}]),
ok = log_on_remote_node(Node, "Cause simple error printout"),
?check({error,{?STANDARD_HANDLER,filesync,Log,{error,terminated}}}),
ok = log_on_remote_node(Node, "No second error printout"),
?check_no_log,
rpc:call(Node, ?MODULE, set_result, [file_datasync,{error,eacces}]),
ok = log_on_remote_node(Node, "Cause simple error printout"),
?check({error,{?STANDARD_HANDLER,filesync,Log,{error,eacces}}}),
rpc:call(Node, ?MODULE, set_result, [file_datasync,ok]),
ok = log_on_remote_node(Node, "Logged2"),
?check_no_log,
ok.
sync_failure(cleanup, _Config) ->
Nodes = nodes(),
[test_server:stop_node(Node) || Node <- Nodes].
start_std_h_on_new_node(_Config, Func, Log) ->
Pa = filename:dirname(code:which(?MODULE)),
Dest =
case os:type() of
{win32,_} ->
lists:concat([" {file,\\\"",Log,"\\\"}"]);
_ ->
lists:concat([" \'{file,\"",Log,"\"}\'"])
end,
Args = lists:concat([" -kernel ",logger_dest,Dest," -pa ",Pa]),
Name = lists:concat([?MODULE,"_",Func]),
ct:pal("Starting ~s with ~tp", [Name,Args]),
{ok,Node} = test_server:start_node(Name, peer, [{args, Args}]),
Pid = rpc:call(Node,erlang,whereis,[?STANDARD_HANDLER]),
true = is_pid(Pid),
ok = rpc:call(Node,logger,set_handler_config,[?STANDARD_HANDLER,formatter,
{?MODULE,nl}]),
Node.
%% functions for test hook macros to be called by rpc
set_internal_log(Mod, Func) ->
?set_internal_log({Mod,Func}).
set_result(Op, Result) ->
?set_result(Op, Result).
set_defaults() ->
?set_defaults().
%% internal log function that sends the term to the test case process
internal_log(Type, Term) ->
[{tester,Tester}] = ets:lookup(?TEST_HOOKS_TAB, tester),
Tester ! {log,{Type,Term}},
logger:internal_log(Type, Term),
ok.
%%%-----------------------------------------------------------------
%%% Overload protection tests
op_switch_to_sync_file(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 3,
drop_new_reqs_qlen => 501,
flush_reqs_qlen => 2000,
enable_burst_limit => false}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
%% TRecvPid = start_op_trace(),
NumOfReqs = 500,
send_burst({n,NumOfReqs}, seq, {chars,79}, info),
NumOfReqs = count_lines(Log),
%% true = analyse_trace(TRecvPid,
%% fun(Events) -> find_mode(async,Events) end),
%% true = analyse_trace(TRecvPid,
%% fun(Events) -> find_mode(sync,Events) end),
%% true = analyse_trace(TRecvPid,
%% fun(Events) -> find_switch(async,sync,Events) end),
%% false = analyse_trace(TRecvPid,
%% fun(Events) -> find_mode(drop,Events) end),
%% false = analyse_trace(TRecvPid,
%% fun(Events) -> find_mode(flush,Events) end),
ok = file:delete(Log),
%% stop_op_trace(TRecvPid),
ok.
op_switch_to_sync_file(cleanup, _Config) ->
ok = stop_handler(?MODULE).
op_switch_to_sync_tty(Config) ->
{HConfig,StdHConfig} = start_handler(?MODULE, standard_io, Config),
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 3,
drop_new_reqs_qlen => 501,
flush_reqs_qlen => 2000,
enable_burst_limit => false}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
NumOfReqs = 500,
send_burst({n,NumOfReqs}, seq, {chars,79}, info),
ok.
op_switch_to_sync_tty(cleanup, _Config) ->
ok = stop_handler(?MODULE).
op_switch_to_drop_file(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2,
drop_new_reqs_qlen => 3,
flush_reqs_qlen => 600,
enable_burst_limit => false}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
%% TRecvPid = start_op_trace(),
NumOfReqs = 500,
send_burst({n,NumOfReqs}, seq, {chars,79}, info),
Logged = count_lines(Log),
ct:pal("Number of messages dropped = ~w (~w)",
[NumOfReqs-Logged,NumOfReqs]),
true = (Logged < NumOfReqs),
%% true = analyse_trace(TRecvPid,
%% fun(Events) -> find_mode(async,Events) end),
%% true = analyse_trace(TRecvPid,
%% fun(Events) -> find_mode(drop,Events) end),
%% false = analyse_trace(TRecvPid,
%% fun(Events) -> find_mode(flush,Events) end),
%% true = analyse_trace(TRecvPid,
%% fun(Events) -> find_switch(async,drop,Events)
%% orelse find_switch(sync,drop,Events)
%% end),
ok = file:delete(Log),
%% stop_op_trace(TRecvPid),
ok.
op_switch_to_drop_file(cleanup, _Config) ->
ok = stop_handler(?MODULE).
op_switch_to_drop_tty(Config) ->
{HConfig,StdHConfig} = start_handler(?MODULE, standard_io, Config),
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2,
drop_new_reqs_qlen => 3,
flush_reqs_qlen => 600,
enable_burst_limit => false}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
NumOfReqs = 500,
send_burst({n,NumOfReqs}, seq, {chars,79}, info),
ok.
op_switch_to_drop_tty(cleanup, _Config) ->
ok = stop_handler(?MODULE).
op_switch_to_flush_file() ->
[{timetrap,{seconds,60}}].
op_switch_to_flush_file(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
%% it's important that both async and sync requests have been queued
%% when the flush happens (verify with coverage of flush_log_requests/2)
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2,
drop_new_reqs_qlen => 99,
flush_reqs_qlen => 100,
enable_burst_limit => false}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
NumOfReqs = 10000,
Procs = 100,
send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info),
Logged = count_lines(Log),
ct:pal("Number of messages flushed/dropped = ~w (~w)",
[(NumOfReqs*Procs)-Logged,NumOfReqs*Procs]),
true = (Logged < (NumOfReqs*Procs)),
%%! --- Thu Apr 12 13:46:00 2018 --- peppe was here!
%%! TODO: Verify that handler has switched to flush mode
ok = file:delete(Log),
ok.
op_switch_to_flush_file(cleanup, _Config) ->
ok = stop_handler(?MODULE).
op_switch_to_flush_tty(Config) ->
{HConfig,StdHConfig} = start_handler(?MODULE, standard_io, Config),
%% it's important that both async and sync requests have been queued
%% when the flush happens (verify with coverage of flush_log_requests/2)
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2,
drop_new_reqs_qlen => 99,
flush_reqs_qlen => 100,
enable_burst_limit => false}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
NumOfReqs = 10000,
Procs = 10,
send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info),
ok.
op_switch_to_flush_tty(cleanup, _Config) ->
ok = stop_handler(?MODULE).
limit_burst_disabled(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{enable_burst_limit => false,
burst_limit_size => 10,
burst_window_time => 2000,
drop_new_reqs_qlen => 200,
flush_reqs_qlen => 300}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
NumOfReqs = 100,
send_burst({n,NumOfReqs}, seq, {chars,79}, info),
Logged = count_lines(Log),
ct:pal("Number of messages logged = ~w", [Logged]),
ok = file:delete(Log),
NumOfReqs = Logged.
limit_burst_disabled(cleanup, _Config) ->
ok = stop_handler(?MODULE).
limit_burst_enabled_one(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
ReqLimit = 10,
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{enable_burst_limit => true,
burst_limit_size => ReqLimit,
burst_window_time => 2000,
drop_new_reqs_qlen => 200,
flush_reqs_qlen => 300}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
NumOfReqs = 100,
send_burst({n,NumOfReqs}, seq, {chars,79}, info),
Logged = count_lines(Log),
ct:pal("Number of messages logged = ~w", [Logged]),
ok = file:delete(Log),
ReqLimit = Logged.
limit_burst_enabled_one(cleanup, _Config) ->
ok = stop_handler(?MODULE).
limit_burst_enabled_period(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
ReqLimit = 10,
BurstTWin = 1000,
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{enable_burst_limit => true,
burst_limit_size => ReqLimit,
burst_window_time => BurstTWin,
drop_new_reqs_qlen => 20000,
flush_reqs_qlen => 20001}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
Windows = 3,
Sent = send_burst({t,BurstTWin*Windows}, seq, {chars,79}, info),
Logged = count_lines(Log),
ct:pal("Number of messages sent = ~w~nNumber of messages logged = ~w",
[Sent,Logged]),
ok = file:delete(Log),
true = (Logged > (ReqLimit*Windows)) andalso
(Logged < (ReqLimit*(Windows+2))).
limit_burst_enabled_period(cleanup, _Config) ->
ok = stop_handler(?MODULE).
kill_disabled(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
NewHConfig =
HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>false,
handler_overloaded_qlen=>10,
handler_overloaded_mem=>100}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
NumOfReqs = 100,
send_burst({n,NumOfReqs}, seq, {chars,79}, info),
Logged = count_lines(Log),
ct:pal("Number of messages logged = ~w", [Logged]),
ok = file:delete(Log),
true = is_pid(whereis(?MODULE)),
ok.
kill_disabled(cleanup, _Config) ->
ok = stop_handler(?MODULE).
qlen_kill_new(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
Pid0 = whereis(?MODULE),
{_,Mem0} = process_info(Pid0, memory),
RestartAfter = 2000,
NewHConfig =
HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true,
handler_overloaded_qlen=>10,
handler_overloaded_mem=>Mem0+50000,
handler_restart_after=>RestartAfter}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
MRef = erlang:monitor(process, Pid0),
NumOfReqs = 100,
Procs = 2,
send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info),
%% send_burst({n,NumOfReqs}, seq, {chars,79}, info),
receive
{'DOWN', MRef, _, _, Info} ->
case Info of
{shutdown,{overloaded,?MODULE,QLen,Mem}} ->
ct:pal("Terminated with qlen = ~w, mem = ~w", [QLen,Mem]);
killed ->
ct:pal("Slow shutdown, handler process was killed!", [])
end,
timer:sleep(RestartAfter + 1000),
true = is_pid(whereis(?MODULE)),
ok
after
5000 ->
Info = logger_std_h:info(?MODULE),
ct:pal("Handler state = ~p", [Info]),
ct:fail("Handler not dead! It should not have survived this!")
end.
qlen_kill_new(cleanup, _Config) ->
ok = stop_handler(?MODULE).
%% choke the standard handler on remote node to verify the termination
%% works as expected
qlen_kill_std(Config) ->
%%! HERE
%% Dir = ?config(priv_dir, Config),
%% File = lists:concat([?MODULE,"_",?FUNCTION_NAME,".log"]),
%% Log = filename:join(Dir, File),
%% Node = start_std_h_on_new_node(Config, ?FUNCTION_NAME, Log),
%% ok = rpc:call(Node, logger, set_handler_config,
%% [?STANDARD_HANDLER, logger_std_h,
%% #{enable_kill_overloaded=>true,
%% handler_overloaded_qlen=>10,
%% handler_overloaded_mem=>100000}]),
{skip,"Not done yet"}.
mem_kill_new(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
Pid0 = whereis(?MODULE),
{_,Mem0} = process_info(Pid0, memory),
RestartAfter = 2000,
NewHConfig =
HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true,
handler_overloaded_qlen=>50000,
handler_overloaded_mem=>Mem0+500,
handler_restart_after=>RestartAfter}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
MRef = erlang:monitor(process, Pid0),
NumOfReqs = 100,
Procs = 2,
send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info),
%% send_burst({n,NumOfReqs}, seq, {chars,79}, info),
receive
{'DOWN', MRef, _, _, Info} ->
case Info of
{shutdown,{overloaded,?MODULE,QLen,Mem}} ->
ct:pal("Terminated with qlen = ~w, mem = ~w", [QLen,Mem]);
killed ->
ct:pal("Slow shutdown, handler process was killed!", [])
end,
timer:sleep(RestartAfter * 2),
true = is_pid(whereis(?MODULE)),
ok
after
5000 ->
Info = logger_std_h:info(?MODULE),
ct:pal("Handler state = ~p", [Info]),
ct:fail("Handler not dead! It should not have survived this!")
end.
mem_kill_new(cleanup, _Config) ->
ok = stop_handler(?MODULE).
%% choke the standard handler on remote node to verify the termination
%% works as expected
mem_kill_std(Config) ->
{skip,"Not done yet"}.
restart_after(Config) ->
{Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
NewHConfig1 =
HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true,
handler_overloaded_qlen=>10,
handler_restart_after=>never}},
ok = logger:set_handler_config(?MODULE, NewHConfig1),
MRef1 = erlang:monitor(process, whereis(?MODULE)),
%% kill handler
send_burst({n,100}, {spawn,2,0}, {chars,79}, info),
receive
{'DOWN', MRef1, _, _, _Info1} ->
timer:sleep(?HANDLER_RESTART_AFTER + 1000),
undefined = whereis(?MODULE),
ok
after
5000 ->
ct:fail("Handler not dead! It should not have survived this!")
end,
{Log,_,_} = start_handler(?MODULE, ?FUNCTION_NAME, Config),
RestartAfter = 2000,
NewHConfig2 =
HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true,
handler_overloaded_qlen=>10,
handler_restart_after=>RestartAfter}},
ok = logger:set_handler_config(?MODULE, NewHConfig2),
Pid0 = whereis(?MODULE),
MRef2 = erlang:monitor(process, Pid0),
%% kill handler
send_burst({n,100}, {spawn,2,0}, {chars,79}, info),
receive
{'DOWN', MRef2, _, _, _Info2} ->
timer:sleep(RestartAfter + 1000),
Pid1 = whereis(?MODULE),
true = is_pid(Pid1),
false = (Pid1 == Pid0),
ok
after
5000 ->
ct:fail("Handler not dead! It should not have survived this!")
end,
ok.
restart_after(cleanup, _Config) ->
ok = stop_handler(?MODULE).
%% send handler requests (filesync, info, reset, change_config)
%% during high load to verify that sync, dropping and flushing is
%% handled correctly.
handler_requests_under_load() ->
[{timetrap,{seconds,60}}].
handler_requests_under_load(Config) ->
{Log,HConfig,StdHConfig} =
start_handler(?MODULE, ?FUNCTION_NAME, Config),
NewHConfig =
HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2,
drop_new_reqs_qlen => 1000,
flush_reqs_qlen => 2000,
enable_burst_limit => false}},
ok = logger:set_handler_config(?MODULE, NewHConfig),
Pid = spawn_link(fun() -> send_requests(?MODULE, 1, [{filesync,[]},
{info,[]},
{reset,[]},
{change_config,[]}])
end),
Sent = send_burst({t,10000}, seq, {chars,79}, info),
Pid ! {self(),finish},
ReqResult = receive {Pid,Result} -> Result end,
Logged = count_lines(Log),
ct:pal("Number of messages sent = ~w~nNumber of messages logged = ~w",
[Sent,Logged]),
FindError = fun(Res) ->
[E || E <- Res,
is_tuple(E) andalso (element(1,E) == error)]
end,
Errors = [{Req,FindError(Res)} || {Req,Res} <- ReqResult],
NoOfReqs = lists:foldl(fun({_,Res}, N) -> N + length(Res) end, 0, ReqResult),
ct:pal("~w requests made. Errors: ~n~p", [NoOfReqs,Errors]),
ok = file:delete(Log).
handler_requests_under_load(cleanup, Config) ->
ok = stop_handler(?MODULE).
send_requests(HName, TO, Reqs = [{Req,Res}|Rs]) ->
receive
{From,finish} ->
From ! {self(),Reqs}
after
TO ->
Result =
case Req of
change_config ->
logger:set_handler_config(HName, logger_std_h,
#{enable_kill_overloaded =>
false});
Func ->
logger_std_h:Func(HName)
end,
send_requests(HName, TO, Rs ++ [{Req,[Result|Res]}])
end.
%%%-----------------------------------------------------------------
%%%
start_handler(Name, TTY, Config) when TTY == standard_io;
TTY == standard_error->
ok = logger:add_handler(Name,
logger_std_h,
#{logger_std_h => #{type => TTY},
filter_default=>log,
filters=>?DEFAULT_HANDLER_FILTERS([Name]),
formatter=>{?MODULE,op}}),
{ok,{_,HConfig = #{logger_std_h := StdHConfig}}} =
logger:get_handler_config(Name),
{HConfig,StdHConfig};
start_handler(Name, FuncName, Config) ->
Dir = ?config(priv_dir,Config),
Log = filename:join(Dir, lists:concat([FuncName,".log"])),
ct:pal("Logging to ~tp", [Log]),
Type = {file,Log},
ok = logger:add_handler(Name,
logger_std_h,
#{logger_std_h => #{type => Type},
filter_default=>log,
filters=>?DEFAULT_HANDLER_FILTERS([Name]),
formatter=>{?MODULE,op}}),
{ok,{_,HConfig = #{logger_std_h := StdHConfig}}} =
logger:get_handler_config(Name),
{Log,HConfig,StdHConfig}.
stop_handler(Name) ->
ok = logger:remove_handler(Name),
ct:pal("Handler ~p stopped!", [Name]).
count_lines(File) ->
wait_until_written(File, -1),
count_lines1(File).
wait_until_written(File, Sz) ->
timer:sleep(2000),
case file:read_file_info(File) of
{ok,#file_info{size = Sz}} ->
timer:sleep(1000),
case file:read_file_info(File) of
{ok,#file_info{size = Sz1}} ->
ok;
{ok,#file_info{size = Sz2}} ->
wait_until_written(File, Sz2)
end;
{ok,#file_info{size = Sz1}} ->
wait_until_written(File, Sz1)
end.
count_lines1(File) ->
Counter = fun Cnt(Dev,LC) ->
case file:read_line(Dev) of
eof -> LC;
_ -> Cnt(Dev,LC+1)
end
end,
{_,Dev} = file:open(File, [read]),
Lines = Counter(Dev, 0),
file:close(Dev),
Lines.
send_burst(NorT, Type, {chars,Sz}, Class) ->
Text = [34 + rand:uniform(126-34) || _ <- lists:seq(1,Sz)],
case NorT of
{n,N} ->
%% process_flag(priority, high),
send_n_burst(N, Type, Text, Class),
%% process_flag(priority, normal),
N;
{t,T} ->
ct:pal("Sending messages sequentially for ~w ms", [T]),
T0 = erlang:monotonic_time(millisecond),
send_t_burst(T0, T, Text, Class, 0)
end.
send_n_burst(0, _, _Text, _Class) ->
ok;
send_n_burst(N, seq, Text, Class) ->
ok = logger:Class(Text, ?domain),
send_n_burst(N-1, seq, Text, Class);
send_n_burst(N, {spawn,Ps,TO}, Text, Class) ->
ct:pal("~w processes each sending ~w messages", [Ps,N]),
PerProc = fun() ->
send_n_burst(N, seq, Text, Class)
end,
MRefs = [begin if TO == 0 -> ok; true -> timer:sleep(TO) end,
monitor(process,spawn_link(PerProc)) end ||
_ <- lists:seq(1,Ps)],
lists:foreach(fun(MRef) ->
receive
{'DOWN', MRef, _, _, _} ->
ok
end
end, MRefs),
ct:pal("Message burst sent", []),
ok.
send_t_burst(T0, T, Text, Class, N) ->
T1 = erlang:monotonic_time(millisecond),
if (T1-T0) > T ->
N;
true ->
ok = logger:Class(Text, ?domain),
send_t_burst(T0, T, Text, Class, N+1)
end.
%%%-----------------------------------------------------------------
%%% Formatter callback
%%% Using this to send the formatted string back to the test case
%%% process - so it can check for logged events.
format(_,bad_return) ->
bad_return;
format(_,crash) ->
erlang:error(formatter_crashed);
format(#{msg:={string,String0}},no_nl) ->
String = unicode:characters_to_list(String0),
String;
format(#{msg:={string,String0}},nl) ->
String = unicode:characters_to_list(String0),
String++"\n";
format(#{msg:={string,String0}},op) ->
String = unicode:characters_to_list(String0),
String++"\n";
format(#{msg:={report,#{label:={supervisor,progress}}}},op) ->
"";
format(#{msg:={report,#{label:={gen_server,terminate}}}},op) ->
"";
format(#{msg:={report,#{label:={proc_lib,crash}}}},op) ->
"";
format(#{msg:={F,A}},Pid) when is_list(F), is_list(A) ->
String = lists:flatten(io_lib:format(F,A)),
Pid ! {log,String},
String++"\n";
format(#{msg:={string,String0}},Pid) ->
String = unicode:characters_to_list(String0),
Pid ! {log,String},
String++"\n".
add_remove_instance_nofile(Type) ->
ok = logger:add_handler(?MODULE,logger_std_h,
#{logger_std_h => #{type => Type},
filter_default=>stop,
filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]),
formatter=>{?MODULE,self()}}),
Pid = whereis(?MODULE),
true = is_pid(Pid),
group_leader(group_leader(),Pid), % to get printouts in test log
logger:info(M1=?msg,?domain),
?check(M1),
%% check that filesync doesn't do damage even if not relevant
ok = logger_std_h:filesync(?MODULE),
ok = logger:remove_handler(?MODULE),
timer:sleep(500),
undefined = whereis(?MODULE),
logger:info(?msg,?domain),
?check_no_log,
ok.
logger_std_h_remove() ->
logger:remove_handler(?MODULE).
logger_std_h_remove(Id) ->
logger:remove_handler(Id).
try_read_file(FileName, Expected, Time) when Time > 0 ->
case file:read_file(FileName) of
Expected ->
ok;
Error = {error,_Reason} ->
ct:pal("Can't read ~tp: ~tp", [FileName,Error]),
erlang:error(Error);
Got ->
ct:pal("try_read_file got ~tp", [Got]),
timer:sleep(500),
try_read_file(FileName, Expected, Time-500)
end;
try_read_file(FileName, Expected, _) ->
ct:pal("Missing pattern ~tp in ~tp", [Expected,FileName]),
erlang:error({error,missing_expected_pattern}).
try_match_file(FileName, Pattern, Time) ->
try_match_file(FileName, Pattern, Time, <<>>).
try_match_file(FileName, Pattern, Time, _) when Time > 0 ->
case file:read_file(FileName) of
{ok, Bin} ->
case re:run(Bin,Pattern,[{capture,none}]) of
match ->
unicode:characters_to_list(Bin);
_ ->
timer:sleep(100),
try_match_file(FileName, Pattern, Time-100, Bin)
end;
Error ->
erlang:error(Error)
end;
try_match_file(_,Pattern,_,Incorrect) ->
ct:pal("try_match_file did not match pattern: ~p~nGot: ~p~n",
[Pattern,Incorrect]),
erlang:error({error,not_matching_pattern,Pattern,Incorrect}).
%%%-----------------------------------------------------------------
%%%
start_op_trace() ->
TraceFun = fun({trace,_,call,{_Mod,Func,Details}}, Pid) ->
Pid ! {trace_call,Func,Details},
Pid;
({trace,_,return_from,{_Mod,Func,_},RetVal}, Pid) ->
Pid ! {trace_return,Func,RetVal},
Pid
end,
TRecvPid = spawn_link(fun() -> trace_receiver(5000) end),
{ok,_} = dbg:tracer(process, {TraceFun, TRecvPid}),
{ok,_} = dbg:p(whereis(?MODULE), [c]),
{ok,_} = dbg:p(self(), [c]),
MS1 = dbg:fun2ms(fun([_]) -> return_trace() end),
{ok,_} = dbg:tp(logger_h_common, check_load, 1, MS1),
{ok,_} = dbg:tpl(logger_h_common, flush_log_requests, 2, []),
MS2 = dbg:fun2ms(fun([_,mode]) -> return_trace() end),
{ok,_} = dbg:tpl(ets, lookup, 2, MS2),
ct:pal("Tracing started!", []),
TRecvPid.
stop_op_trace(TRecvPid) ->
dbg:stop_clear(),
unlink(TRecvPid),
exit(TRecvPid, kill),
ok.
find_mode(flush, Events) ->
lists:any(fun({trace_call,flush_log_requests,[_,_]}) -> true;
(_) -> false
end, Events);
find_mode(Mode, Events) ->
lists:keymember([{mode,Mode}], 3, Events).
find_switch(From, To, Events) ->
try lists:foldl(fun({trace_return,check_load,{To,_,_,_}},
{trace_call,check_load,[#{mode := From}]}) ->
throw(match);
(Event, _) ->
Event
end, undefined, Events) of
_ -> false
catch
throw:match -> true
end.
analyse_trace(TRecvPid, TestFun) ->
TRecvPid ! {test,self(),TestFun},
receive
{result,TRecvPid,Result} ->
Result
after
60000 ->
fails
end.
trace_receiver(IdleT) ->
Msgs = receive_until_idle(IdleT, 5, []),
ct:pal("~w trace events generated", [length(Msgs)]),
analyse(Msgs).
receive_until_idle(IdleT, WaitN, Msgs) ->
receive
Msg = {trace_call,_,_} ->
receive_until_idle(IdleT, 5, [Msg | Msgs]);
Msg = {trace_return,_,_} ->
receive_until_idle(IdleT, 5, [Msg | Msgs])
after
IdleT ->
if WaitN == 0 ->
Msgs;
true ->
receive_until_idle(IdleT, WaitN-1, Msgs)
end
end.
analyse(Msgs) ->
receive
{test,From,TestFun} ->
From ! {result,self(),TestFun(Msgs)},
analyse(Msgs)
end.
