#
# %CopyrightBegin%
#
# Copyright Ericsson AB 1999-2019. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# %CopyrightEnd%
#
# --------------------------------------------------------------------
# If downloading this app separately (not as part of
# an OTP source release), then there is two ways to
# build and install this app.
# 1) Replace the megaco source dir in an existing
# OTP source tree. Then re-configure, build and
# install OTP.
# Note that the directory name has to be renamed
# from megaco-<version> to megaco.
# 2) Unpack outside an OTP-source tree.
# a) Configure app (make ERL_TOP=</path/to/top/OTP-source/dir> conf)
# b) make ERL_TOP=</path/to/top/OTP-source/dir>
# c) make ERL_TOP=</path/to/top/OTP-source/dir> \
# OTP_INSTALL_DIR=</path/to/top/OTP-install/dir> app_install
# (e.g. if otp is installed in /usr/local/otp-r9b,
# then OTP_INSTALL_DIR is /usr/local/otp-r9b and
# the app will be installed in dir
# /usr/local/otp-r9b/lib/erlang/lib/megaco-<version>)
# -----------------------------------------------------------------------
#
include $(ERL_TOP)/make/target.mk
include $(ERL_TOP)/make/$(TARGET)/otp.mk
# ----------------------------------------------------
# Application version
# ----------------------------------------------------
include vsn.mk
VSN=$(MEGACO_VSN)
DIR_NAME = megaco_src-$(VSN)$(PRE_VSN)
nullstring :=
space := $(nullstring) # a space at the end
ifndef APP_RELEASE_DIR
ifndef TESTROOT
APP_RELEASE_DIR = /tmp
else
APP_RELEASE_DIR = $(subst $(space),\ ,$(TESTROOT))
endif
endif
ifndef APP_TAR_FILE
APP_TAR_FILE = $(APP_RELEASE_DIR)/$(DIR_NAME).tgz
endif
APP_DIR = $(APP_RELEASE_DIR)/$(DIR_NAME)
ifdef OTP_INSTALL_DIR
APP_INSTALL_DIR = $(OTP_INSTALL_DIR)/lib/erlang
else
# If installing into an OTP structure created
# by installing an source OTP build, the '/tmp'
# shall be replaced with the value of ERL_TOP
APP_INSTALL_DIR = /tmp/lib/erlang
endif
# ----------------------------------------------------
# Common Macros
# ----------------------------------------------------
include subdirs.mk
SUB_DIRECTORIES = $(SUB_DIRS) doc/src
SPECIAL_TARGETS =
ifeq ($(FLEX_SCANNER_LINENO),disable)
FLEX_SCANNER_LINENO_ENABLER = --disable-megaco-flex-scanner-lineno
else
FLEX_SCANNER_LINENO_ENABLER = --enable-megaco-flex-scanner-lineno
endif
ifeq ($(FLEX_SCANNER_REENTRANT),disable)
FLEX_SCANNER_REENTRANT_ENABLER = --disable-megaco-reentrant-flex-scanner
else
FLEX_SCANNER_REENTRANT_ENABLER = --enable-megaco-reentrant-flex-scanner
endif
CONFIGURE_OPTS = $(FLEX_SCANNER_LINENO_ENABLER) $(FLEX_SCANNER_REENTRANT_ENABLER)
DIA_PLT = ./priv/plt/$(APPLICATION).plt
DIA_ANALYSIS = $(basename $(DIA_PLT)).dialyzer_analysis
# ----------------------------------------------------
# Default Subdir Targets
# ----------------------------------------------------
include $(ERL_TOP)/make/otp_subdir.mk
.PHONY: reconf conf dconf econf configure setup info version \
app_install dialyzer
reconf:
(cd $(ERL_TOP) && \
./otp_build autoconf && \
./otp_build configure && \
cd $(ERL_TOP)/../libraries/megaco)
conf: do_configure
dconf:
$(MAKE) conf FLEX_SCANNER_REENTRANT=disable
econf:
$(MAKE) conf FLEX_SCANNER_REENTRANT=enable
do_configure: configure
./configure $(CONFIGURE_OPTS)
configure: configure.in
autoconf
setup:
(cd src && $(MAKE) $@)
info:
@echo "APP_RELEASE_DIR: $(APP_RELEASE_DIR)"
@echo "APP_DIR: $(APP_DIR)"
@echo "APP_TAR_FILE: $(APP_TAR_FILE)"
@echo "OTP_INSTALL_DIR: $(OTP_INSTALL_DIR)"
@echo "APP_INSTALL_DIR: $(APP_INSTALL_DIR)"
@echo ""
@echo "DIA_PLT: $(DIA_PLT)"
@echo "DIA_ANALYSIS: $(DIA_ANALYSIS)"
@echo ""
version:
@echo "$(VSN)"
# ----------------------------------------------------
# Application install (of a app built from source) targets
# ----------------------------------------------------
app_install:
$(MAKE) TESTROOT="$(APP_INSTALL_DIR)" release
# ----------------------------------------------------
# Application (source) release targets
# ----------------------------------------------------
app_release: app_doc tar
app_doc:
cd doc/src; $(MAKE) html man
app_dir: $(APP_DIR)
tar_exclude: TAR.exclude2
TAR.exclude2: Makefile TAR.exclude
cat TAR.exclude > TAR.exclude2; \
echo "megaco/TAR.exclude2" >> TAR.exclude2; \
echo "megaco/priv/lib/$(TARGET)" >> TAR.exclude2; \
echo "megaco/src/flex/$(TARGET)" >> TAR.exclude2; \
(cd ..; find megaco -name 'prebuild.skip' >> megaco/TAR.exclude2)
(cd ..; find megaco -name 'findmerge.*' >> megaco/TAR.exclude2)
(cd ..; find megaco -name '*.contrib*' >> megaco/TAR.exclude2)
(cd ..; find megaco -name '*.keep*' >> megaco/TAR.exclude2)
(cd ..; find megaco -name '*.mkelem*' >> megaco/TAR.exclude2)
(cd ..; find megaco -name '*~' >> megaco/TAR.exclude2)
(cd ..; find megaco -name 'erl_crash.dump' >> megaco/TAR.exclude2)
(cd ..; find megaco/test -name '*.beam' >> megaco/TAR.exclude2)
(cd ..; find megaco -name '*.log' >> megaco/TAR.exclude2)
(cd ..; find megaco/examples/meas -name '*.xls' >> megaco/TAR.exclude2)
(cd ..; find megaco -name 'core' >> megaco/TAR.exclude2)
(cd ..; find megaco -name '.cmake.state' >> megaco/TAR.exclude2)
$(APP_DIR): tar_exclude
mkdir -p "$(subst $(space),\ ,$@)"; \
(cd ..; tar cfX - megaco/TAR.exclude2 megaco) | \
(cd "$(subst $(space),\ ,$@)"; tar xf -); \
mv "$(subst $(space),\ ,$@)"/megaco/* "$(subst $(space),\ ,$@)"/; \
mkdir $(subst $(space),\ ,$@)/autoconf; \
cp autoconf/config.guess "$(subst $(space),\ ,$@)"/autoconf/; \
cp autoconf/config.sub "$(subst $(space),\ ,$@)"/autoconf/; \
cp autoconf/install-sh "$(subst $(space),\ ,$@)"/autoconf/; \
rmdir "$(subst $(space),\ ,$@)"/megaco
tar: $(APP_TAR_FILE)
$(APP_TAR_FILE): $(APP_DIR)
(cd "$(APP_RELEASE_DIR)"; gtar zcf "$(subst $(space),\ ,$@)" $(DIR_NAME))
dialyzer_plt: $(DIA_PLT)
$(DIA_PLT): Makefile
@echo "Building $(APPLICATION) plt file"
@dialyzer --build_plt \
--output_plt $@ \
-r ../$(APPLICATION)/ebin \
../../lib/kernel/ebin \
../../lib/stdlib/ebin \
../../lib/runtime_tools/ebin \
../../lib/asn1/ebin \
../../lib/debugger/ebin \
../../lib/et/ebin \
../../erts/preloaded/ebin \
--output $(DIA_ANALYSIS) \
--verbose
dialyzer: $(DIA_PLT)
@echo "Running dialyzer on $(APPLICATION)"
@dialyzer --plt $< \
../$(APPLICATION)/ebin \
--verbose
include $(ERL_TOP)/make/app_targets.mk
