<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">
<chapter>
<header>
<copyright>
<year>2006</year><year>2010</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
</legalnotice>
<title>Megaco Release Notes history</title>
<prepared>Micael Karlberg</prepared>
<responsible>OTP</responsible>
<docno></docno>
<approved>OTP</approved>
<checked></checked>
<date>2007-06-15</date>
<rev>A</rev>
<file>notes_history.xml</file>
</header>
<section>
<title>Megaco 3.8.2</title>
<p>Version 3.8.2 supports code replacement in runtime from/to
version 3.8.1 and 3.8 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>Some minor documentation cleanup of the
<seealso marker="megaco_run#transaction_sender">transaction sender</seealso>
chapter of the User's Guide. </p>
<p>Own Id: OTP-7417</p>
<p>Aux Id: Seq 10989</p>
</item>
</list>
-->
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>[text] Messages with property parm values "containing" keywords
confused the parser when using the flex scanner. </p>
<p>Own Id: OTP-7534</p>
<p>Aux Id: Seq 11039</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>For those implementing their own codec's, the new megaco_encoder
behaviour will require three more functions. See above for more
info. </p>
<p>Own Id: OTP-7168</p>
<p>Aux Id: Seq 10867</p>
</item>
</list>
-->
</section>
</section> <!-- 3.8.2 -->
<section>
<title>Megaco 3.8.1</title>
<p>Version 3.8.1 supports code replacement in runtime from/to
version 3.8 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>Some minor documentation cleanup of the
<seealso marker="megaco_run#transaction_sender">transaction sender</seealso>
chapter of the User's Guide. </p>
<p>Own Id: OTP-7417</p>
<p>Aux Id: Seq 10989</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>The event parameter value for completion event ce
of the dd package was incorrectly encoded as type
Value instead of as a quoted string. </p>
<p>Own Id: OTP-7444</p>
</item>
<item>
<p>DigitMap ([0-9ef]) incorrectly interpreted as ([0-9]ef).</p>
<p>Own Id: OTP-7449</p>
</item>
<item>
<p>Receiving an unexpected segment reply could case
an case clause crash. Now a warning message will
be issued instead.</p>
<p>Own Id: OTP-7455</p>
</item>
<item>
<p>The flex scanner had problems parsing wildcarded
service-change request, ammRequest (with add) and
notifyRequest.</p>
<p>Own Id: OTP-7457</p>
<p>Aux Id: Seq 11014</p>
</item>
<item>
<p>Processing requests when "autoconnecting"
caused function cause after reboot.</p>
<p>Own Id: OTP-7459</p>
<p>Aux Id: Seq 11017</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>For those implementing their own codec's, the new megaco_encoder
behaviour will require three more functions. See above for more
info. </p>
<p>Own Id: OTP-7168</p>
<p>Aux Id: Seq 10867</p>
</item>
</list>
-->
</section>
</section> <!-- 3.8.1 -->
<section>
<title>Megaco 3.8</title>
<p>Version 3.8 supports code replacement in runtime from/to
version 3.7.5, 3.7.4 and 3.7.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>Miscellaneous <em>text</em> codec(s) improvements. Both
regarding code size and <em>decode</em> performance. </p>
<p>See the
<seealso marker="megaco_performance">performance</seealso>
chapter of the Users Guide for details.</p>
<p>Own Id: OTP-7228</p>
</item>
<item>
<p>Added the value <c>flag</c> to the resend_indication config
option. See
<seealso marker="megaco#ui_resend_indication">resend_indication</seealso> for more info. </p>
<p>Own Id: OTP-7259</p>
<p>Aux Id: Seq 10901</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>If a TransactionRequest arrives while a user is
connecting (is in the callback function
handle_connect as a result of a megaco:connect call),
megaco responds with a pending message and then drops
the request.</p>
<p>These messages will now be silently dropped, forcing the
other side to resend. </p>
<p>Own Id: OTP-7192</p>
<p>Aux Id: Seq 10884</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>For those implementing their own codec's, the new megaco_encoder
behaviour will require three more functions. See above for more
info. </p>
<p>Own Id: OTP-7168</p>
<p>Aux Id: Seq 10867</p>
</item>
</list>
-->
</section>
</section> <!-- 3.8 -->
<section>
<title>Megaco 3.7.5</title>
<p>Version 3.7.5 supports code replacement in runtime from/to
version 3.7.4, 3.7.3, 3.7.2, 3.7.1 and 3.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>Documentation of function
<seealso marker="megaco#conn_info">megaco:conn_info/2</seealso>
has been updated to include known exit reasons. </p>
<p>Own Id: OTP-7286</p>
<p>Aux Id: Seq 10933</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>The transaction id counter could be incorrectly
updated at wrap-around. The risk was expecially high
at high load. </p>
<p>Own Id: OTP-7303</p>
<p>Aux Id: Seq 10939</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>For those implementing their own codec's, the new megaco_encoder
behaviour will require three more functions. See above for more
info. </p>
<p>Own Id: OTP-7168</p>
<p>Aux Id: Seq 10867</p>
</item>
</list>
-->
</section>
</section> <!-- 3.7.5 -->
<section>
<title>Megaco 3.7.4</title>
<p>Version 3.7.4 supports code replacement in runtime from/to
version 3.7.3, 3.7.2, 3.7.1 and 3.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>In order to better deal with codec's not implementing
the entire
<seealso marker="megaco_encoder">megaco_encoder</seealso>
behaviour, translations of undefined (not implemented) functions
to the <c>{error, not_implemented}</c> return value has been
added for the functions
<seealso marker="megaco_encoder#encode_transaction">encode_transaction/3</seealso>,
<seealso marker="megaco_encoder#encode_action_requests">encode_action_requests/3</seealso> and
<seealso marker="megaco_encoder#encode_action_reply">encode_action_reply/3</seealso>. </p>
<p>Own Id: OTP-7251</p>
<p>Aux Id: Seq 10879</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>The (plain) text scanner could incorrectly identify
character strings (any 17 char long string with the
char t in the middle) as a TimeStampToken.</p>
<p>Own Id: OTP-7249</p>
<p>Aux Id: Seq 10917</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>For those implementing their own codec's, the new megaco_encoder
behaviour will require three more functions. See above for more
info. </p>
<p>Own Id: OTP-7168</p>
<p>Aux Id: Seq 10867</p>
</item>
</list>
-->
</section>
</section> <!-- 3.7.4 -->
<section>
<title>Megaco 3.7.3</title>
<p>Version 3.7.3 supports code replacement in runtime from/to
version 3.7.2, 3.7.1 and 3.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>Updated the graphs of the performace chapter with
to reflect this version of megaco. Also included
results with HiPE-compiled codec's..</p>
<p>Own Id: OTP-7180</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>The behaviour <c>megaco_encoder</c> was lacking three functions
which was made mandatory as of version 3.7. </p>
<p>See
<seealso marker="megaco_encoder#encode_transaction">encode_transaction/3</seealso>,
<seealso marker="megaco_encoder#encode_action_requests">encode_action_requests/3</seealso> and
<seealso marker="megaco_encoder#encode_action_reply">encode_action_reply/3</seealso>
for more info</p>
<p>Own Id: OTP-7168</p>
<p>Aux Id: Seq 10867</p>
</item>
<item>
<p>It was possible to create permenant pending counter
data for a somewhat misbehaving (request) receiver.
If a megaco entity ("sender") sends a request and the
"receiver" (of the request) responds with a pending
message but never actually sends the reply (or if
it is lost), the created pending counter data would
never be deleted if the
<seealso marker="megaco#ui_long_request_timer">long_request_timer</seealso>
was set to <c>infinity</c> (old default) and the
<seealso marker="megaco#ui_recv_pending_limit">recv_pending_limit</seealso>
was set to an integer value (default is <c>infinity</c>). </p>
<p>Own Id: OTP-7189</p>
<p>Aux Id: Seq 10879</p>
</item>
<item>
<p>If a counter whas reset (wrap-around) as a result of
increment larger than 1, then it was actually always
set to the min_trans_id-value.</p>
<p>Own Id: OTP-7216</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>For those implementing their own codec's, the new megaco_encoder
behaviour will require three more functions. See above for more
info. </p>
<p>Own Id: OTP-7168</p>
<p>Aux Id: Seq 10867</p>
</item>
<item>
<p>The default value of the
<seealso marker="megaco#ui_long_request_timer">long_request_timer</seealso>
has been changed from <c>infinity</c> to <em>60 seconds</em>. </p>
<p>Own Id: OTP-7189</p>
<p>Aux Id: Seq 10879</p>
</item>
</list>
</section>
</section> <!-- 3.7.3 -->
<section>
<title>Megaco 3.7.2</title>
<p>Version 3.7.2 supports code replacement in runtime from/to
version 3.7.1 and 3.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>Reporting of error(s) detected during loading of the
flex driver has been improved, by calling the
erlang:format_error function.</p>
<p>Own Id: OTP-7005</p>
</item>
</list>
-->
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>There is a race condition when cancelling requests
during a high load situations which could lead to
spurious (megaco internal) messages beeing sent to
user processes. When a request is issued using
<seealso marker="megaco#call">megaco:call</seealso>,
which returns only after a "reply" can
be delivered, the request timer might expire
during the cancelling of the request, which will cause
megaco to attempt to deliver the timeout info, which
will result in the spurious message.
This problem has now been eliminated by introducing
a proxy process, which simply dies when the "real"
response has been delivered. The spurious reply will
then be sent to a non-existing process. </p>
<p>Own Id: OTP-6972</p>
<p>Aux Id: Seq 10450</p>
</item>
<item>
<p>[text] Decoding a version 2 message with an observedEventParameter
where the value of the parmValue was CT, failes.
CT is defined as the context attribute token in version 3,
and this incorrectly caused the scanner (which is version
agnostic) to create an ContextAttrToken, which caused the
version 2 parser to crash. </p>
<p>Own Id: OTP-7138</p>
<p>Aux Id: Seq 10854</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>Implementing (SDP-) support for RFC 4566 also means that some of
the existing sdp-record definitions have been changed. </p>
<p>Own Id: OTP-6804</p>
<p>Aux Id: Seq 10710</p>
</item>
</list>
-->
</section>
</section> <!-- 3.7.2 -->
<section>
<title>Megaco 3.7.1</title>
<p>Version 3.7.1 supports code replacement in runtime from/to
version 3.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>Reporting of error(s) detected during loading of the
flex driver has been improved, by calling the
erlang:format_error function.</p>
<p>Own Id: OTP-7005</p>
</item>
<item>
<p>Updated documentation for function megaco:connect/4.</p>
<p>Own Id: OTP-7000</p>
<p>Aux Id: Seq 10815</p>
</item>
<item>
<p>Use of depricated function erlang:fault replaced with
erlang:error.</p>
<p>Own Id: OTP-6919</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>Corrected usage of function file:open/2 (the Modes
argument is a list). </p>
<p>Dialyzer</p>
<p>Own Id: OTP-7124</p>
<!-- <p>Aux Id: Seq 10815</p> -->
</item>
<item>
<p>Fixed a reply timer race condition problem resulting
in (case clause) error message. </p>
<p>Own Id: OTP-6999</p>
<p>Aux Id: Seq 10815</p>
</item>
<item>
<p>Failure to parse SDP attribute FMTP rows. </p>
<p>Own Id: OTP-6992</p>
<p>Aux Id: Seq 10813</p>
</item>
<item>
<p>When the megaco application receives two instances of
the same transaction requests (re-send) within too
small a time, there is a small possibility that both
are passed on to the user via a call to the callback
function (handle_trans_request). </p>
<p>Own Id: OTP-6971</p>
<p>Aux Id: Seq 10802</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
<!--
<list type="bulleted">
<item>
<p>Implementing (SDP-) support for RFC 4566 also means that some of
the existing sdp-record definitions have been changed. </p>
<p>Own Id: OTP-6804</p>
<p>Aux Id: Seq 10710</p>
</item>
</list>
-->
</section>
</section> <!-- 3.7.1 -->
<section>
<title>Megaco 3.7</title>
<!--
<p>Version 3.7 supports code replacement in runtime from/to
version 3.6.0.1 & 3.6 except
when using any of the drivers (flex for text or asn1 for binary).</p>
-->
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Added support for the full v3-standard
(including segmentation).</p>
<p>See
<seealso marker="megaco_run#segment_reply">segmentation of transaction replies</seealso>
and
<seealso marker="megaco_encode#handling_versions">handling megaco versions</seealso>
for more info.</p>
<p>Note that segmentation is currently not supported by the
binary codec(s). </p>
<p>Own Id: OTP-5979</p>
</item>
<item>
<p>The megaco documentation source has been converted
from SGML to XML.</p>
<p>Own Id: OTP-6753</p>
</item>
<item>
<p>SDP support updated according to RFC 4566. </p>
<p>Own Id: OTP-6804</p>
<p>Aux Id: Seq 10710</p>
</item>
<item>
<p>Added a way for the transport module to transfer
extra information to the user callback functions
<seealso marker="megaco_user">callback functions</seealso>
upon receipt of a message. This is done by adding an extra
argument when calling the (new) message delivery function(s)
<seealso marker="megaco#process_received_message">process_received_message/5</seealso>
or
<seealso marker="megaco#receive_message">receive_message/5</seealso>. </p>
<p>Similarly, the <c>UserReply</c> part of the return value for the
<seealso marker="megaco#call">call</seealso> function can
now also include such extra information. </p>
<p>Own Id: OTP-6865</p>
<p>Aux Id: Seq 10559</p>
</item>
<!--
<item>
<p>Use of depricated function erlang:fault replaced by
erlang:error. </p>
<p>Own Id: OTP-6919</p>
</item>
-->
<item>
<p>Improve the utility functions for information retrieval:
<seealso marker="megaco#info">megaco:info</seealso>,
<seealso marker="megaco#system_info">megaco:system_info</seealso>,
<seealso marker="megaco#conn_info">megaco:conn_info</seealso> and
<seealso marker="megaco#user_info">megaco:user_info</seealso>.</p>
<p>Own Id: OTP-6976</p>
<p>Aux Id: Seq 10804</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<p>-</p>
</section>
<section>
<title>Incompatibilities</title>
<!--
<p>-</p>
-->
<list type="bulleted">
<item>
<p>Implementing (SDP-) support for RFC 4566 also means that some of
the existing sdp-record definitions have been changed. </p>
<p>Own Id: OTP-6804</p>
<p>Aux Id: Seq 10710</p>
</item>
</list>
</section>
</section> <!-- 3.7 -->
<section><title>Megaco 3.6.3</title>
<p>Version 3.6.3 supports code replacement in runtime from/to
version 3.6.2, 3.6.1, 3.6.0.1, 3.6, 3.5.3, 3.5.2, 3.5.1.1, 3.5.1 and
3.5 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section><title>Improvements and new features</title>
<p>-</p>
<!--
<list>
<item>
<p>Minor Makefile changes.</p>
<p>Own Id: OTP-6704</p>
</item>
</list>
-->
</section>
<section><title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list>
<!--
<item>
<p>Fixed a reply timer race condition problem resulting
in (case clause) error message. </p>
<p>Own Id: OTP-6999</p>
<p>Aux Id: Seq 10815</p>
</item>
-->
<item>
<p>Failure to parse SDP attribute FMTP rows. </p>
<p>Own Id: OTP-6992</p>
<p>Aux Id: Seq 10813</p>
</item>
<!--
<item>
<p>There is a race condition when cancelling requests
during a high load situations which could lead to
spurious (megaco internal) messages being sent to
user processes. When a request is issued using
<seealso marker="megaco#call">megaco:call</seealso>,
which returns only after a "reply" can
be delivered, the request timer might expire
during the cancelling of the request, which will cause
megaco to attempt to deliver the timeout info, which
will result in the spurious message.
This problem has now been eliminated by introducing
a proxy process, which simply dies when the "real"
response has been delivered. The spurious reply will
then be sent to a non-existing process. </p>
<p>Own Id: OTP-6972</p>
<p>Aux Id: Seq 10450</p>
</item>
<item>
<p>When the megaco application receives two instances of
the same transaction requests (re-send) within too
small a time, there is a small possibility that both
are passed on to the user via a call to the callback
function (handle_trans_request). </p>
<p>Own Id: OTP-6971</p>
<p>Aux Id: Seq 10802</p>
</item>
-->
</list>
</section>
<section><title>Incompatibilities</title>
<p>-</p>
<!--
<list>
<item>
<p>The interface of the megaco_compressed callback module
has been changed, see the
<seealso marker="megaco_edist_compress">megaco_edist_compress</seealso>
behaviour module for more details.
<p>Own Id: OTP-6609</p>
</item>
</list>
-->
</section>
</section> <!-- 3.6.3 -->
<section><title>Megaco 3.6.2</title>
<p>Version 3.6.2 supports code replacement in runtime from/to
version 3.6.1, 3.6.0.1, 3.6, 3.5.3, 3.5.2, 3.5.1.1, 3.5.1 and 3.5 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section><title>Improvements and new features</title>
<p>-</p>
<!--
<list>
<item>
<p>Minor Makefile changes.</p>
<p>Own Id: OTP-6704</p>
</item>
</list>
-->
</section>
<section><title>Fixed bugs and malfunctions</title>
<!--
<p>-</p>
-->
<list>
<item>
<p>When timers expire while a connection cancel
(megaco:cancel) is in progress, there is a raise
condition possibility. This has been eliminated. </p>
<p>Own Id: OTP-6921</p>
<p>Aux Id: Seq 10450</p>
</item>
</list>
</section>
<section><title>Incompatibilities</title>
<p>-</p>
<!--
<list>
<item>
<p>The interface of the megaco_compressed callback module
has been changed, see the
<seealso marker="megaco_edist_compress">megaco_edist_compress</seealso>
behaviour module for more details.
<p>Own Id: OTP-6609</p>
</item>
</list>
-->
</section>
</section> <!-- 3.6.2 -->
<section>
<title>Megaco 3.6.1</title>
<p>Version 3.6.1 supports code replacement in runtime from/to
version 3.6.0.1, 3.6, 3.5.3, 3.5.2, 3.5.1.1, 3.5.1 and 3.5 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>An empty time-zone adjustment was incorrectly allowed
when decoding SDP using
<seealso marker="megaco#decode_sdp">decode_sdp</seealso>. </p>
<p>Also the parsing of attributes was to restrictive. </p>
<p>Own Id: OTP-6803</p>
<p>Aux Id: Seq 10710</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.6.0.1</title>
<p>Version 3.6.0.1 supports code replacement in runtime from/to
version 3.6, 3.5.3, 3.5.2, 3.5.1.1, 3.5.1 and 3.5 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Minor Makefile changes.</p>
<p>Own Id: OTP-6704</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<p>-</p>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.6</title>
<p>Version 3.6 supports code replacement in runtime from/to
version 3.5.3, 3.5.2, 3.5.1.1, 3.5.1 and 3.5 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Improved erl_dist codec handling of
<seealso marker="megaco_encode#erl_dist_config">megaco_compressed</seealso>
codec config. Introduced behaviour,
<seealso marker="megaco_edist_compress">megaco_edist_compress</seealso>,
for the megaco_compressed callback of module. </p>
<p>Own Id: OTP-6609</p>
</item>
<item>
<p>The behaviour
<seealso marker="megaco_transport">megaco_transport</seealso>
have been updated to include the <em>optional</em>
function
<seealso marker="megaco_transport#resend_message">resend_message</seealso>.
This function is called instead of the standard
<seealso marker="megaco_transport#send_message">send_message</seealso>
if the new config option
<seealso marker="megaco#ui_resend_indication">resend_indication</seealso>
was set to <c><![CDATA[true]]></c><em>and</em> it is a message resend. </p>
<p>Own Id: OTP-6442</p>
<p>Aux Id: Seq 10393</p>
</item>
<item>
<p>Add ability to decrement the timeout time for
incremental timers, see
<seealso marker="megaco#">reference manual</seealso>
for more info.</p>
<p>Own Id: OTP-6441</p>
<p>Aux Id: Seq 10349</p>
</item>
<item>
<p>Miscellaneous minor performance improvements of the
text codec's.</p>
<p>Own Id: OTP-6185</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Missing documentation link in module
<seealso marker="megaco_user">megaco_user</seealso>. </p>
<p>Own Id: OTP-6578</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The interface of the megaco_compressed callback module
has been changed, see the
<seealso marker="megaco_edist_compress">megaco_edist_compress</seealso>
behaviour module for more details.</p>
<p>Own Id: OTP-6609</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.5.3</title>
<p>Version 3.5.3 supports code replacement in runtime from/to
version 3.5.2, 3.5.1.1, 3.5.1 and 3.5 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Using the <seealso marker="megaco#call">call</seealso>
function at high load could cause replies from other
transactions to be returned also. </p>
<p>At high load, when a process calls the function
<seealso marker="megaco#call">call</seealso>,
which times out, then makes another
call, it is possible that the reply to the first
request arrives while the process is waiting for
reply to the second request. As no checks were made if
the reply was actually the expected (transaction-id),
this reply was also included in the result. </p>
<p>This problem has been fixed by calling the megaco_user
callback function
<seealso marker="megaco_user#unexpected_trans">handle_unexpected_trans</seealso>
if unexpected transactions are received. </p>
<p>Own Id: OTP-6549</p>
<p>Aux Id: Seq 10598</p>
</item>
<item>
<p>Miscellaneous minor corrections, such as
removing "dead code". Detected by dialyzer. </p>
<p>Own Id: OTP-6520</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.5.2</title>
<p>Version 3.5.2 supports code replacement in runtime from/to
version 3.5.1.1, 3.5.1 and 3.5 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Minor improvement to the text codec error reporting.</p>
<p>Own Id: OTP-6404</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Misc cleanup to eliminate some dialyzer warnings [dialyzer]. </p>
<p>Own Id: OTP-6503</p>
</item>
<item>
<p>Improper text encoding of EventSpecs.
All codec versions [dialyzer]. </p>
<p>Own Id: OTP-6490</p>
</item>
<item>
<p>Missing (link) anchors. </p>
<p>Own Id: OTP-6422</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.5.1</title>
<p>Version 3.5.1 supports code replacement in runtime from/to
version 3.5, 3.4.4 and 3.4.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>When replies arrive during a call to megaco:cancel
there is a raise condition possibility. This has been
eliminated. </p>
<p>Own Id: OTP-6276</p>
<p>Aux Id: Seq 10450</p>
</item>
<item>
<p>MG receiving a request, when the reply to the
service-change has not yet been received (505)
(either because it's been lost or because the MGC is
erroneous). This will now result in a call to
<seealso marker="megaco_user#trans_reply">handle_trans_reply</seealso>
with the UserReply: <c><![CDATA[{error, timeout}]]></c>. </p>
<p>Own Id: OTP-6275</p>
<p>Aux Id: Seq 10458</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.5</title>
<p>Version 3.5 supports code replacement in runtime from/to
version 3.4.4 and 3.4.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>All error/warning messages from the megaco application
will be tagged in such a way that they will be easy to
identify (and search for in logs).</p>
<p>Own Id: OTP-6223</p>
<p>Aux Id: Seq 10423</p>
</item>
<item>
<p>The allowed return values of the send_message function
of the megaco_transport callback module has been
extended (to allow the transport module to cancel the message
sending), see the functions
<seealso marker="megaco#call">call</seealso>,
<seealso marker="megaco_user#trans_reply">handle_trans_reply</seealso>,
<seealso marker="megaco_user#trans_ack">handle_trans_ack</seealso>
and <seealso marker="megaco_transport#send_message">send_message</seealso>
for more info.</p>
<p>Own Id: OTP-6253</p>
<p>Aux Id: Seq 10423</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>A minor problem related to the passage of the pending
limit could potentially prevent the reply
info to be retained when it should have been removed.
Also, the user will not be informed about the passing
of the pending limit in this special case. </p>
<p>Own Id: OTP-6256</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.4.4</title>
<p>Version 3.4.4 supports code replacement in runtime from/to
version 3.4.3, 3.4.2, 3.4.1 and 3.4 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Improved documentation of
<seealso marker="megaco#call">call</seealso> return values.</p>
<p>Own Id: OTP-6219</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>There was still one case when "pending limit exceeded"
was reported as a message error instead of transaction
error. This has been fixed. </p>
<p>Own Id: OTP-6217</p>
<p>Aux Id: Seq 10415</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.4.3</title>
<p>Version 3.4.3 supports code replacement in runtime from/to
version 3.4.2, 3.4.1 and 3.4 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Added a number of v3 related error codes (defined in H248.08).</p>
<p>Own Id: OTP-6170</p>
<p>Aux Id: Seq 10372</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Added check for the illegal option reply_data in the Options
(third) argument to the
<seealso marker="megaco#call">call</seealso>
function.
The valid options was documented but never checked.</p>
<p>Own Id: OTP-6171</p>
<p>Aux Id: Seq 10345</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>A call to the function
<seealso marker="megaco#call">call</seealso>
with the illegal option, reply_data,
will now result in an <c><![CDATA[{error, term()}]]></c> result.</p>
<p>Own Id: OTP-6171</p>
<p>Aux Id: Seq 10345</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.4.2</title>
<p>Version 3.4.2 supports code replacement in runtime from/to
version 3.4.1, 3.4, 3.3.5, 3.3.4, 3.3.3, 3.3.2, 3.3.1 and 3.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Pending limit exceeded error message was incorrectly
composed as a message error instead of a TransactionReply
(transactionError) error.</p>
<p>Own Id: OTP-6148</p>
<p>Aux Id: Seq 10337</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The ErrorDescriptor of the pending limit exceeded error
is now encapsulated within an TransactionReply instead of
the messageBody.</p>
<p>Own Id: OTP-6148</p>
<p>Aux Id: Seq 10337</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.4.1</title>
<p>Version 3.4.1 supports code replacement in runtime from/to
version 3.4, 3.3.5, 3.3.4, 3.3.3, 3.3.2, 3.3.1 and 3.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Incorrect version string(s) in appup file. Most of
the version strings in the appup file was malformed,
which most likely made up-/downgrade impossible.</p>
<p>Own Id: OTP-6113</p>
</item>
<item>
<p>Fixed release notes history.</p>
<p>Own Id: OTP-6108</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.4</title>
<p>Version 3.4 supports code replacement in runtime from/to
version 3.3.3, 3.3.2, 3.3.1 and 3.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Handling failure to send reply. Previously, when megaco
was unable to send a reply (built from the action list
returned by
<seealso marker="megaco_user#trans_request">handle_trans_request</seealso>),
nothing was done, except for sending an error message.
This has now been changed so that the error will be returned
to the user via a call to the callback function,
<seealso marker="megaco_user#trans_ack">handle_trans_ack</seealso>
(unless <c><![CDATA[ack_action() = discard_ack]]></c>). </p>
<p>Own Id: OTP-6055</p>
</item>
<item>
<p>Add possibility to override send options when sending
reply messages. This is done by adding another return
alternative to the
<seealso marker="megaco_user#trans_request">handle_trans_request</seealso>
and
<seealso marker="megaco_user#trans_long_request">handle_trans_long_request</seealso>
callback function(s). </p>
<p>Own Id: OTP-6052</p>
<p>Aux Id: Seq 10284</p>
</item>
<item>
<p>Added another config option <c><![CDATA[long_request_resend]]></c>.
The purpose of this option is to make the megaco
application to continue re-sending requests, even after
having received a pending message, until it receives
the reply or it gives up (timeout). </p>
<p>See
<seealso marker="megaco#user_info">user_info</seealso> and
<seealso marker="megaco#conn_info">conn_info</seealso>
for more info. </p>
<p>Own Id: OTP-6051</p>
<p>Aux Id: Seq 10284</p>
</item>
<item>
<p>Modify the way the stack handles the reply-timer.
Now, if an incremental timer is used, every time there
is an intermediate timeout, the timer is restarted
(just as before) but the reply is also <em>resent</em>. </p>
<p>See
<seealso marker="megaco#user_info">user_info</seealso> and
<seealso marker="megaco#conn_info">conn_info</seealso>
for more info. </p>
<p>Own Id: OTP-6048</p>
<p>Aux Id: Seq 10284</p>
</item>
<item>
<p>Added the possibility to conditionally request
immediate acknowledgement of a reply (when at least one
pending message has been sent). </p>
<p>This is done by adding another return value for the
<seealso marker="megaco_user#trans_request">handle_trans_request</seealso>
callback function. </p>
<p>Own Id: OTP-6030</p>
<p>Aux Id: Seq 10270</p>
</item>
<item>
<p>The SDP support has received a major updated. Added two new
function's to
<seealso marker="megaco#decode_sdp">decode</seealso> and
<seealso marker="megaco#encode_sdp">encode</seealso> SDP. </p>
<p>Own Id: OTP-5980</p>
</item>
<item>
<p>Added support for another pre version of v3 (<c><![CDATA[prev3c]]></c>).
This is based on the final version of the standard, but does
not include support for segments.</p>
<p>Own Id: OTP-5769</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Removed unnecessary error report. In a special case
two (error_logger) error reports could be sent:
When receiving a transaction request for which an
reply, with immediate-ack-requested, has already been
send, the reply is resent. But if the sending fails,
two (error_logger) error reports is sent. This
has been corrected (so that only one is sent).</p>
<p>Own Id: OTP-6090</p>
<p>Aux Id: Seq 10308</p>
</item>
<item>
<p>Bad formated debug printout in transaction sender.</p>
<p>Own Id: OTP-6089</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>All of the old SDP api function(s) has been removed.</p>
<p>Own Id: OTP-5980</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.3.4</title>
<p>Version 3.3.4 supports code replacement in runtime from/to
version 3.3.3, 3.3.2, 3.3.1 and 3.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Misc Dialyzer warnings.</p>
<p>Own Id: OTP-6076</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.3.3</title>
<p>Version 3.3.3 supports code replacement in runtime from/to
version 3.3.2, 3.3.1 and 3.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Flex driver split into two separate. One for use in
threaded runtime system (OTP built with e.g.
<c><![CDATA[--enable-threads]]></c>), one for non-threaded runtime systems.</p>
<p>Own Id: OTP-6046</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<p>-</p>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.3.2</title>
<p>Version 3.3.2 supports code replacement in runtime from/to
version 3.3.1, 3.3 and 3.2.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Improve timer documentation.</p>
<p>Own Id: OTP-6022</p>
<p>Aux Id: Seq 10266</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>[text] The parser has been made more strict with
regard to what ContextID values will be accepted.
<c><![CDATA[0x0]]></c>, <c><![CDATA[0xFFFFFFFE]]></c> and <c><![CDATA[0xFFFFFFFF]]></c>
will no longer be accepted.</p>
<p>Own Id: OTP-6017</p>
<p>Aux Id: Seq 10265</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.3.1</title>
<p>Version 3.3.1 supports code replacement in runtime from/to
version 3.3 and 3.2.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>[text] The text encoder (both pretty and compact)
encodes terminationIDList incorrectly. This effects
MuxDescriptor This applies to all versions.</p>
<p>Own Id: OTP-5993</p>
<p>Aux Id: Seq 10248</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.3</title>
<p>Version 3.3 supports code replacement in runtime from/to
version 3.2.7 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Added a utility function to facilitate pretty-printing of
messages, see
<seealso marker="megaco#token_tag2string">token_tag2string</seealso>.</p>
<p>Own Id: OTP-5973</p>
<p>Aux Id: Seq 10224</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Fixed documentation after OTP-5953. The new info print
functions where not documented, but the old, and
deprecated, where still.</p>
<p>Own Id: OTP-5965</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.2.7</title>
<p>Version 3.2.7 supports code replacement in runtime from/to
version 3.2.6, 3.2.5 and 3.2.4 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Updated configure script to handle smp-support.</p>
<p>Own Id: OTP-5952</p>
</item>
<item>
<p>Added new version info print function(s).</p>
<p>Own Id: OTP-5953</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Code cleanup: Compiler warnings: variable X is unused.</p>
<p>Own Id: OTP-5948</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The old version info print function, format_versions/1,
have been deprecated.</p>
<p>Own Id: OTP-5953</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.2.6</title>
<p>Version 3.2.6 supports code replacement in runtime from/to
version 3.2.5, 3.2.4 and 3.2.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Improve error message format on (reply) decode error.</p>
<p>Own Id: OTP-5918</p>
<p>Aux Id: Seq 10199</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Wrong binary name resolver used for prev3b (prev3a).</p>
<p>Own Id: OTP-5919</p>
</item>
<item>
<p>When using ber_bin-codec and option {version3,prev3b}
the wrong asn1 and transform modules (prev3a) where
used.</p>
<p>Own Id: OTP-5920</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.2.5</title>
<p>Version 3.2.5 supports code replacement in runtime from/to
version 3.2.4 and 3.2.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Aligned the
<seealso marker="megaco#user_info">user_info</seealso> and
<seealso marker="megaco#conn_info">conn_info</seealso> functions
regarding trans_id retrieval.</p>
<p>Own Id: OTP-5887</p>
<p>Aux Id: Seq 10184</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The
<seealso marker="megaco#conn_info">conn_info</seealso> function
once again returns the <em>next</em> transaction id.</p>
<p>Own Id: OTP-5887</p>
<p>Aux Id: Seq 10184</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.2.4</title>
<p>Version 3.2.4 supports code replacement in runtime from/to
version 3.2.3 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Documentation of
<seealso marker="megaco_udp#upgrade_receive_handle">upgrade_receive_handle</seealso> missing one argument (<c><![CDATA[NewHandle]]></c>).</p>
<p>Own Id: OTP-5867</p>
</item>
<item>
<p>Documentation of
<seealso marker="megaco#conn_info">conn_info</seealso>
did not document legal <c><![CDATA[Item]]></c> value <c><![CDATA[local_mid]]></c>.</p>
<p>Own Id: OTP-5879</p>
<p>Aux Id: Seq 10176</p>
</item>
<item>
<p>Documentation of
<seealso marker="megaco#conn_info">conn_info</seealso>
did not document legal <c><![CDATA[Item]]></c> value <c><![CDATA[remote_mid]]></c>.</p>
<p>Own Id: OTP-5880</p>
<p>Aux Id: Seq 10177</p>
</item>
<item>
<p>Improper [text] encode of localControlDescriptor.
Incorrectly allowed zero length list of LocalParm.
All versions (v1, v2, v3 [prev3a, prev3b]). </p>
<p>Own Id: OTP-5882</p>
</item>
<item>
<p>Function format_versions documentation with wrong arity.</p>
<p>Own Id: OTP-5885</p>
</item>
<item>
<p>Timer recalculation fails when receiving pending
message if the timer is of the type <c><![CDATA[megaco_incr_timer]]></c>
and the <c><![CDATA[max_retries]]></c> field has the
value <c><![CDATA[infinity_restartable]]></c>. </p>
<p>Own Id: OTP-5886</p>
<p>Aux Id: Seq 10181</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p><c><![CDATA[localControlDescriptor]]></c> list of <c><![CDATA[localParm]]></c> now at least
has to be of length 1.</p>
<p>Own Id: OTP-5882</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.2.3</title>
<p>Version 3.2.3 supports code replacement in runtime from/to
version 3.2.2, 3.2.1 and 3.2 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Assumed a more strict approach to the return values of
the callback functions of the
<seealso marker="megaco_user">megaco_user</seealso> behaviour.
Now, a return value other then what is described in
the behaviour documentation, will result in a warning
message. </p>
<p>Except for the
<seealso marker="megaco_user#trans_request">handle_trans_request/3</seealso> and
<seealso marker="megaco_user#trans_long_request">handle_trans_long_request/3</seealso>,
which still results in error messages.</p>
<p>Own Id: OTP-5830</p>
<p>Aux Id: Seq 10148</p>
</item>
<item>
<p>Introduced a <em>strict version control</em> (strict_version)
connection info and user info option. See the
<seealso marker="megaco#user_info">user_info</seealso> and
<seealso marker="megaco#conn_info">conn_info</seealso> functions
for more info.</p>
<p>Own Id: OTP-5839</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Digit Map: Improper handling of duration.
<seealso marker="megaco#eval_digit_map">eval_digit_map</seealso>
and
<seealso marker="megaco#test_digit_event">test_digit_event</seealso>.</p>
<p>Own Id: OTP-5826</p>
<p>Aux Id: Seq 10085</p>
</item>
<item>
<p>The documentation of the
<seealso marker="megaco#call">call</seealso> and
<seealso marker="megaco#cast">cast</seealso> functions
was unclear regarding pre-encoded actions.</p>
<p>Own Id: OTP-5833</p>
<p>Aux Id: Seq 10146</p>
</item>
<item>
<p>The prev3b text codec's failed to properly decode an
auditReply with ErrorDescriptor.</p>
<p>Own Id: OTP-5836</p>
<p>Aux Id: Seq 10155</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The ok return value from
<seealso marker="megaco#test_digit_event">test_digit_event</seealso> and
<seealso marker="megaco#eval_digit_map">eval_digit_map</seealso>
has been changed.</p>
<p>Own Id: OTP-5826</p>
<p>Aux Id: Seq 10085</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.2.2</title>
<p>Version 3.2.2 supports code replacement in runtime from/to
version 3.2.1 and 3.2 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Digit Map: Megaco does not handle "unexpected event"
according to chapter 7.1.14.5 point 5. See
<seealso marker="megaco#eval_digit_map">eval_digit_map</seealso>
and
<seealso marker="megaco#test_digit_event">test_digit_event</seealso>.</p>
<p>Own Id: OTP-5799</p>
<p>Aux Id: Seq 10085</p>
</item>
<item>
<p>The text codec of prev3b should handle
encoding/decoding of indAudMediaDescriptor as specified
in the final version of the v3 spec. This is backward
compatible and more aligned with the ASN.1.</p>
<p>Own Id: OTP-5803</p>
<p>Aux Id: Seq 10119</p>
</item>
<item>
<p>Flex scanner cannot handle empty local/remote
descriptors.</p>
<p>Own Id: OTP-5804</p>
<p>Aux Id: Seq 10119</p>
</item>
<item>
<p>Text codecs does not handle messages of unsupported versions
(or with incorrect version) in a good way.</p>
<p>Own Id: OTP-5805</p>
<p>Aux Id: Seq 10131</p>
</item>
<item>
<p>The documentation of the reply-timer was unclear.</p>
<p>Own Id: OTP-5816</p>
<p>Aux Id: Seq 10142</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The ok return value from
<seealso marker="megaco#test_digit_event">test_digit_event</seealso> and
<seealso marker="megaco#eval_digit_map">eval_digit_map</seealso>
has been changed to accommodate for this problem.</p>
<p>Own Id: OTP-5799</p>
<p>Aux Id: Seq 10085</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.2.1</title>
<p>Version 3.2.1 supports code replacement in runtime from/to
version 3.2 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>In order to allow the user to drop (ignore) a transaction
request a new return value, <c><![CDATA[ignore_trans_request]]></c>, has
been added to the
<seealso marker="megaco_user#trans_request">handle_trans_request/3</seealso>
callback function.</p>
<p>Own Id: OTP-5725</p>
<p>Aux Id: Seq 10084</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Text encoding of the termination id list in
contextTerminationAudit incorrect. Missing { }.
All versions.</p>
<p>Own Id: OTP-5793</p>
<p>Aux Id: Seq 10116</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.2</title>
<p>Version 3.2 supports code replacement in runtime from/to
version 3.1 and 3.0.1 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Added support for another pre version of v3 (<c><![CDATA[prev3b]]></c>).
This is basically the same as <c><![CDATA[prev3a]]></c> except that
context priority (in contextProperties) has been
"fixed" so that it is backward compatible with v2.</p>
<p>Own Id: OTP-5717</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>The (digit map)
<seealso marker="megaco#test_digit_event">test</seealso> and
<seealso marker="megaco#eval_digit_map">eval</seealso> function(s)
was lacking result info on what kind of completion
was done; <c><![CDATA[full]]></c> or <c><![CDATA[unambiguous]]></c>.</p>
<p>Own Id: OTP-5750</p>
<p>Aux Id: Seq 10085</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The (successfull) return value from the
<seealso marker="megaco#test_digit_event">test_digit_event</seealso> and
<seealso marker="megaco#eval_digit_map">eval_digit_map</seealso>
has been changed.</p>
<p>Own Id: OTP-5750</p>
<p>Aux Id: Seq 10085</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.1</title>
<p>Version 3.1 supports code replacement in runtime from/to
version 3.0.1 and 3.0 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>The <c><![CDATA[megaco_incr_timer]]></c> has been tweaked so that the
max_retries field can now also take the value
<c><![CDATA[infinity_restartable]]></c>. This means that the only way
to actually restart the timer is if some external event
occurs, e.g. a pending message when the long request timer
is running. That is, if the timeout time actually expires,
then so does the timer.</p>
<p>Own Id: OTP-5619</p>
<p>Aux Id: Seq 9845</p>
</item>
<item>
<p>Added function format_versions/1 to print the extended version
info produced by the
<seealso marker="megaco#versions1">versions1</seealso> and
<seealso marker="megaco#versions2">versions2</seealso>
functions.</p>
<p>Own Id: OTP-5664</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Incorrect text encoding of embedded Events.</p>
<p>Own Id: OTP-5601</p>
</item>
<item>
<p>Incorrect text encoding of embedded Signal.</p>
<p>Own Id: OTP-5600</p>
</item>
<item>
<p>Misc bugs detected by Dyalizer.</p>
<p>Own Id: OTP-5597</p>
</item>
<item>
<p>Encoding of SDP was in text not done strictly
according RFC2327. Each line should be terminated
with carriage return and newline (0x0d0a), but was only
terminated with single newline (0x0a).</p>
<p>Own Id: OTP-5542</p>
<p>Aux Id: Seq 9669</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 3.0.1</title>
<p>Version 3.0.1 supports code replacement in runtime from/to
version 3.0 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Pending limit cleanup error's.
In some situations (high load), reply-records where never removed,
blocking new requests with the same transaction id.</p>
<p>Own Id: OTP-5401</p>
</item>
<item>
<p>Added utility functions to retrieve some system and application
info, see
<seealso marker="megaco#versions1">versions1</seealso> and
<seealso marker="megaco#versions2">versions2</seealso>.</p>
<p>Own Id: OTP-5446</p>
</item>
<item>
<p>When the
<seealso marker="megaco#enable_trace">enable_trace</seealso>
function is called with the <c><![CDATA[File]]></c> argument, it sets
up <c><![CDATA[dbg]]></c> so that trace events are written as plain text
to the given file (using <c><![CDATA[io:format]]></c>).</p>
<p>Own Id: OTP-5447</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The <c><![CDATA[File]]></c> argument to the function
<seealso marker="megaco#enable_trace">enable_trace</seealso> no
longer sets up <c><![CDATA[dbg]]></c> to write the trace events directly to
file but instead to be written to a plain text file using
<c><![CDATA[io:format]]></c>. </p>
<p>Also <seealso marker="megaco#enable_trace">enable_trace</seealso>
no longer accepts the argument
<c><![CDATA[{io, Verbosity}]]></c>.</p>
<p>Own Id: OTP-5447</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 3.0</title>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Implementation of the Megaco v2 corrigendum 1 (03/2004).</p>
<p><br></br>This means in short:</p>
<list type="bulleted">
<item>
<p>The <em>ModemDescriptor</em> has been deprecated.
If this descriptor is found in a received message
it will be ignored (removed from the message).
<br></br>If an attempt is made to encode a message containing
a ModemDescriptor, an error will be returned.
<br></br>If in the binary codec case, encoding-config
contains <em>native</em>, then the <em>ModemDescriptor</em>
will however be included in the message when encoding and
also decoded. This means that it in this case it is up the
user to never include the <em>ModemDescriptor</em> in a
transmitted message and to ignore it, if received.</p>
</item>
<item>
<p>Addition of the <em>EmergencyOffToken</em>, which is used
in the <em>contextProperty</em>.</p>
</item>
</list>
<p>Own Id: OTP-5204</p>
</item>
<item>
<p>Added receiving pending limit config property. This is
the limit for the number of pending messages that is
accepted before a request is considered "a lost cause".</p>
<p>Own Id: OTP-5220</p>
</item>
<item>
<p>Added support for preliminary version 3. Based on TD-33.</p>
<p>See chapter <seealso marker="megaco_encode#handling_versions">Handling megaco versions</seealso> on how to configure and
use the preliminary version 3 (prev3a).</p>
<p>Own Id: OTP-5236</p>
</item>
<item>
<p>Added configure thread support.</p>
<p>Own Id: OTP-5351</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>When text encoding the ServiceChangeParm in v2, the
serviceChangeInfo field was ignored.</p>
<p>Own Id: OTP-5352</p>
</item>
<item>
<p>When text parsing serviceChangeParm in v2, all of auditItem
was put into the auditToken field of the AuditDescriptor
(the serviceChangeInfo field of the ServiceChangeParm record).
The indAudterminationAudit should go into the auditPropertyToken
field.</p>
<p>Own Id: OTP-5353</p>
</item>
<item>
<p>Binary name resolver was based on RFC 2885 (version 0.8
of the megaco standard). Among other things the
package id numbering was incorrect.
This is the case both for version 1 and 2.</p>
<p>Own Id: OTP-5272</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>Package number scheme (among other things) was changed
in version 1 of the standard..</p>
<p>Own Id: OTP-5272</p>
</item>
<item>
<p>The config property <em>orig_pending_limit</em> has been
renamed to <em>sent_pending_limit</em>.</p>
<p>Own Id: OTP-5220</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 2.1.8</title>
<p>Version 2.1.8 supports code replacement in runtime from/to
version 2.1.7 and 2.1.6 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>The error counter <em>medGwyGatewayNumErrors</em> did not work.
This counter is incremented by the megaco application
when decode of a message fails. Due to the
construction of the decoders, nothing beyond the
error reason (in the text case, basically an
unintelligible list of tokens) is returned. E.g. not
the Mid needed to be able to deduce which MG
(conn-handle), this message came from. This resulted
in an increment of the "global" <em>medGwyGatewayNumErrors</em>
counter instead of the connection specific.
This has been fixed. In the text case by adding a mini
decoder, that basically only decodes the message as
far as the Mid (if the error is in or before the Mid,
then this decoder also fails).</p>
<p>Own Id: OTP-5296</p>
<p>Aux Id: Seq 9669</p>
</item>
<item>
<p>When the
<seealso marker="megaco#cancel">megaco:cancel/2</seealso>
function is called, the
megaco application is supposed to perform a cleanup.
E.g. remove aut-dated request and reply records. For
the reply-records this did not work, since it only
removed those record which had the state field
set to <em>wait_for_ack</em>, and not <em>aborted</em>!
If the state had been set to <em>aborted</em> and not
yet been removed (which normally happens when
the reply_timer times out) when the disconnect
and cancel functions where called, those records
would never be removed. This means that if eventually
a transaction was received which had the same
transaction-id as the <em>aborted</em> reply, this would
just be ignored!</p>
<p>Own Id: OTP-5310</p>
<p>Aux Id: Seq 9668</p>
</item>
<item>
<p>Incorrect definition of hexdig in the flex-scanner.
<br></br>Angelo Contardi</p>
<p>Own Id: OTP-5312</p>
</item>
<item>
<p>Various cleanup of the v2 text parser:
<br></br>1) Removed unused nonterminal and rule digitMapName.
<br></br>2) Token 'TimeStampToken' also a safeToken.
<br></br>Angelo Contardi</p>
<p>Own Id: OTP-5313</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1.7</title>
<p>Version 2.1.7 supports code replacement in runtime from/to
version 2.1.6, 2.1.5, 2.1.4, 2.1.3, 2.1.2, 2.1.1 and 2.1 except
when using any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>The text decoders failed to decode the contextRequest
with a contextAudit (ContextAttrAuditRequest).</p>
<p>Own Id: OTP-5290</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1.6</title>
<p>Version 2.1.6 supports code replacement in runtime from/to
version 2.1.5, 2.1.4, 2.1.3, 2.1.2, 2.1.1 and 2.1 except when using
any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Minor error handling improvement to the text encoder.</p>
<p>Own Id: OTP-5193</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>The megaco text codec failed to properly encode a message
containing no or an empty terminationAudit list or possibly
a terminationAudit list with only an "empty" emptyDescriptor
(e.g. an AuditDescriptor without any values; auditToken is
either asn1_NOVALUE or []). This effected AmmsReply and
auditOther (AuditResult) and both v1 and v2.</p>
<p>Own Id: OTP-5186</p>
<p>Aux Id: Seq 9226</p>
</item>
<item>
<p>Version 2 codec corrections: Incorrectly transformed (encoded
and decoded) IndAudStreamDescriptor (binary), encoded
IndAudMediaDescriptor and IndAudStreamDescriptor (text).
Incorrectly decoded IndAudMediaDescriptor (text).</p>
<p>Own Id: OTP-5201</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1.5</title>
<p>Version 2.1.5 supports code replacement in runtime from/to
version 2.1.4, 2.1.3, 2.1.2, 2.1.1 and 2.1 except when using
any of the drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Bad error message when encoding invalid termination id.</p>
<p>Own Id: OTP-5133</p>
<p>Aux Id: Seq 9153</p>
</item>
<item>
<p>The included tcp transport module had a possible
message queue accumulation loophole. If the
connection is terminated between the calls
gen_tcp:accept/1 and gen_tcp:controlling_process/2
we did not clean up the message queue.
Also, if controlling_process fails, a cleanup must
be done.</p>
<p>Own Id: OTP-5130</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1.4</title>
<p>Version 2.1.4 supports code replacement in runtime from/to
version 2.1.3, 2.1.2, 2.1.1 and 2.1 except when using any of the
drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Failure to decode indAudLocalControlDescriptor with
more then one indAudlocalParm.
<br></br>This applies only to version 2.</p>
<p>Own Id: OTP-5106</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1.3</title>
<p>Version 2.1.3 supports code replacement in runtime from/to
version 2.1.2, 2.1.1 and 2.1 except when using any of the
drivers (flex for text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Failure to encode a ActionReply with empty contextReply
(asn1_NOVALUE) and commandReply ([]).
Failure to decode ActionReply with error descriptor with
non-empty contextReply and/or commandReply.
<br></br>This applies to both version 1 and 2.</p>
<p>Own Id: OTP-5085</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1.2</title>
<p>Version 2.1.2 supports code replacement in runtime from/to
version 2.1.1 and 2.1 except when using any of the drivers (flex for
text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Encoding of a MediaDescriptor fails if the
streams part is empty (asn1_NOVALUE).</p>
<p>Own Id: OTP-5068</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1.1</title>
<p>Version 2.1.1 supports code replacement in runtime from/to
version 2.1 except when using any of the drivers (flex for
text or asn1 for binary).</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>A pretty text message containing an ObservedEvents
without timestamp, will fail to decode. This effects
both v1 and v2.</p>
<p>Own Id: OTP-5042</p>
</item>
<item>
<p>During node restart in a high load scenario,
the megaco_messenger:receive_reply_remote function
could be called on a node before the megaco app
has actually been started. This will result in a
crash (EXIT with badarg). This is now handled in the
same way as if the request was not found (with a
call to the callback function handle_unexpected_trans).</p>
<p>Own Id: OTP-5025</p>
<p>Aux Id: Seq 8658</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.1</title>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Allow separately encode action requests. Handle sending
of those previously encoded action requests as binaries
(as well as lists of action requests).
<br></br>See
<seealso marker="megaco#encode_actions">encode_actions</seealso>,
<seealso marker="megaco#call">call</seealso> and
<seealso marker="megaco#cast">cast</seealso>.</p>
</item>
<item>
<p>Introduce a transaction sender process (one for each
connection) which will accumulate transactions and send
several in one message.
<br></br>See <seealso marker="megaco_run#transaction_sender">transaction sender</seealso>,
<seealso marker="megaco#user_info">user_info</seealso> and
<seealso marker="megaco#conn_info">conn_info</seealso>.</p>
</item>
<item>
<p>New encoding-config options for the erl_dist encoder which
makes it possible to compress the megaco messages. This makes
the erl_dist encoded message much more compact (about 1/3 of
the size).
<br></br>See <seealso marker="megaco_encode#erl_dist_config">megaco_compressed</seealso>.</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Text parser(s) did not handle parsing of the StreamId field of
RequestedEvent and SecondRequestedEvent.</p>
<p>Own Id: OTP-4974</p>
</item>
<item>
<p>Repeated transaction request receiving when exceeding
pending limit will cause the message handling process
to crash.</p>
<p>Own Id: OTP-4956</p>
<p>Aux Id: Seq 8445</p>
</item>
<item>
<p>Text parser did not handle auditReturnItem properly,
as defined in IGv11.</p>
<p>Own Id: OTP-4950</p>
</item>
<item>
<p>Missing [text] servChgReplyParm consistency check.</p>
<p>Own Id: OTP-4949</p>
</item>
<item>
<p>Incorrect handling of comments in text messages.</p>
<p>Own Id: OTP-4946</p>
</item>
<item>
<p>Missing [text] serviceChangeParm consistency check.</p>
<p>Own Id: OTP-4945</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>Text parser did not handle auditReturnItem properly,
as defined in IGv11. The result which was supposed to
have been presented as the tuple:
<c><![CDATA[{emptyDescriptor, #'AuditDescriptor{}}]]></c>
in the termination audit list, was instead entered as
<c><![CDATA[{auditReturnItem, atom()}]]></c>
in the termination audit list. This has been fixed.</p>
<p>Own Id: OTP-4950</p>
</item>
<item>
<p>In previous releases there where a couple of user and
connection config items dealing with accumulating
transaction ack sending. These has all been renamed
due to the introduction of the transaction sender.
<br></br>See <seealso marker="megaco_run#transaction_sender">transaction sender</seealso>,
<seealso marker="megaco#user_info">user_info</seealso> and
<seealso marker="megaco#conn_info">conn_info</seealso>.</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 2.0.1</title>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Megaco did not handle IPv6-addresses.</p>
<p>Own Id: OTP-4920</p>
</item>
<item>
<p>Text encoding of hex-digits sometimes incorrect.</p>
<p>Own Id: OTP-4921</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 2.0</title>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Support for both version 1 and 2 of the Megaco standard,
updated according with IGv10-13.</p>
<p>Version selection is described in chapter
<seealso marker="megaco_encode#handling_versions">Handling megaco versions 1 & 2</seealso>.</p>
</item>
<item>
<p>It is now possible to use the ASN.1 linked in driver
for decode/encode of messages (encoding config <em>driver</em>).
<br></br>See chapter
<seealso marker="megaco_encode#binary_config">Configuration of binary encoding module(s)</seealso>.</p>
</item>
<item>
<p>Added a new configuration parameter, orig_pending_limit, to
support the xOriginatingPendingLimit (x = MG or MGC)
property in the root package.
<br></br>See the
<seealso marker="megaco#user_info">orig_pending_limit</seealso>
parameter of the user_info function (also conn_info).</p>
</item>
<item>
<p>Added a new configuration parameter, threaded.
This tells the megaco app, that all
transaction requests in a message should be executed
in parallel (e.g. each in its own process).
<br></br>See the
<seealso marker="megaco#user_info">threaded</seealso> parameter
of the user_info function (also conn_info).</p>
</item>
<item>
<p>Added behaviour modules
<seealso marker="megaco_transport">megaco_transport</seealso> and
<seealso marker="megaco_encoder">megaco_encoder</seealso>.</p>
</item>
<item>
<p>Added new (message) test functions to the megaco module, see
<seealso marker="megaco#test_request">test_request</seealso> and
<seealso marker="megaco#test_reply">test_reply</seealso>.</p>
</item>
<item>
<p>Minor improvements to the tracing.</p>
</item>
<item>
<p>Minor improvements to the simple example.</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Update of the request timer incorrect when receiving
a pending message. Could cause an exit of the process
handling the message and a subsequent call to the
<c><![CDATA[handle_disconnect]]></c> callback function.</p>
<p>Own Id: OTP-4836</p>
</item>
<item>
<p>Failed stopping the request timer when receiving a reply. </p>
<p>The only effect this had was that the request timer
possibly ran one extra time (without doing anything).</p>
<p>Own Id: OTP-4843</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>signalsDescriptor has changed i v2</p>
</item>
<item>
<p>ServiceChangeProfile has changed in v2</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 1.2.3</title>
<section>
<title>Improvements and new features</title>
<p>- </p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Megaco re-transmission loop, when setting the long request timer
to an incremental timer. Megaco changes to the long request timer
when receiving an pending message (after having sent a request).
Each time the (long) timer expire, it will incorrectly result in
an re-send of the request. This is meaningless since we know from
the received pending that the "other side" has received the request
and is working on it. Furthermore, when in this case the "other
side" receives the request again, it will send another pending
message. Receiving a pending message in this case will
<em>restart</em> the timer (reset it to the initial values). This
means that the timer will actually never fully expire and the two
stacks will continue to exchange request/pending messages for as
long as the "other side" is working on the request.</p>
<p>Own Id: OTP-4760</p>
<p>Aux Id: Seq 8003 </p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>- </p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.2.2</title>
<p>Version 1.2.2 supports code replacement in runtime from/to
version 1.2.1 and 1.2.</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Only spawn a process for the reply-timer if the user
uses three-way-handshake.</p>
<p>Own Id: OTP-4729</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Encoding and decoding of the hexdig
in AuthenticationHeader incorrect.</p>
<p>Own Id: OTP-4710</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>When downgrading form 1.2.2, reply-timers started when running
1.2.2 will not be properly handled since the format has changed.
An error message will be printed when they expire.</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.2.1</title>
<p>Version 1.2.1 only supports code replacement in runtime from/to
version 1.2.</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>This is just a code up-/downgrade cleanup release. I.e. it's the
same as version 1.2 minus the ugly stuff needed to handle up-/downgrade
from/to version 1.1.2, 1.1.1 and 1.1.0.</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<p>-</p>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.2</title>
<p>Version 1.2 supports code replacement in runtime from/to
version 1.1.2, 1.1.1 and 1.1.0.</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>It is now possible to send more then one transaction (request)
in a message. See <seealso marker="megaco#call">call</seealso>
and <seealso marker="megaco#cast">cast</seealso>.</p>
<p>Req Id: M[4]-1</p>
<p>Own Id: OTP-4589</p>
</item>
<item>
<p>Two new parameters for user and connection info has been added:
<c><![CDATA[accu_ack_timer]]></c> and <c><![CDATA[accu_ack_maxcount]]></c>.
These are used together with the <c><![CDATA[auto_ack]]></c> flag and control
whether the acks should be sent immediately or accumulated (and sent
later). Note that this has nothing to do with the
<c><![CDATA[immAckRequired]]></c>-flag in reply transactions.
See <seealso marker="megaco#user_info">user_info</seealso>
and <seealso marker="megaco#conn_info">conn_info</seealso>.</p>
<p>Own Id: OTP-4669</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>TCP transport supervision error (cut-and-paste error).
<br></br>The megaco_tcp worker child was started as if it where a
supervisor (and not a worker) and with a dependency to
megaco_tcp_connection_sup (which it has none)</p>
<p>Own Id: OTP-4649</p>
</item>
<item>
<p>Encoding of transaction ack fails with id ranges.
<br></br>This was not really a problem in previous releases
since such a message was never created (Ack was, possibly,
sent for each received transaction reply).</p>
<p>Own Id: OTP-4652</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<list type="bulleted">
<item>
<p>Neither the TCP nor the UDP transport mechanisms are
part of the megaco supervision tree. This makes code up-/downgrade
difficult when either of them are used as transport.</p>
<p>This will be fixed in a future release of megaco.</p>
</item>
</list>
</section>
</section>
<section>
<title>Megaco 1.1.2</title>
<p>Version 1.1.2 supports code replacement in runtime from/to
version 1.1.1 and 1.1.0.</p>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Service change reason text encoding now always quoted string.</p>
<p>Peter-Henry Mander</p>
<p>Own Id: OTP-4632</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.1.1</title>
<p>Version 1.1.1 supports code replacement in runtime from/to
version 1.1.0.</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Added support for the Megaco mib.</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Result of catch gen_udp:open not properly handled.</p>
<p>Own Id: OTP-4566</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.1.0</title>
<p>Version 1.1.0 does not support code replacement in runtime from
previous versions.</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Reply ack timeout now results in a call to callback
function handle_trans_ack/4 with AckStatus = {error, timeout}.</p>
<p>Own Id: OTP-4378</p>
</item>
<item>
<p>The binary codecs ber_bin and per_bin is now both compiled
with the <em>+optimize</em> compiler flag for better runtime
performance.</p>
<p>Own Id: OTP-4383</p>
</item>
<item>
<p>The previously included tool, et, has been moved out of the
Megaco application. It is now provided as a separate application
in OTP (as of R9).</p>
<p>Own Id: OTP-4487</p>
</item>
<item>
<p>Added attribute app_vsn to all modules.</p>
<p>Own Id: OTP-4486</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Decode of oneStream incorrect.</p>
<p>.</p>
<p>Own Id: OTP-4490</p>
</item>
<item>
<p>Transaction id counter wrapping incorrect when Max is
<c><![CDATA[infinity]]></c>.</p>
<p>Incorrectly the documentation defined a connection info item
<c><![CDATA[min_trans_id]]></c>. It should have been <c><![CDATA[trans_id]]></c>.</p>
<p>Own Id: OTP-4484</p>
</item>
<item>
<p>Package name check in the text parser incorrect.</p>
<p>Own Id: OTP-4364</p>
</item>
<item>
<p>Fixed a minor build problem causing the file
'megaco_text_parser.yrl' to not be included in the release.</p>
<p>Own Id: OTP-4363</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.0.4</title>
<p>Version 1.0.4 supports code replacement in runtime from/to
version 1.0.2 and 1.0.3.</p>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Adding utility functions for megaco tracing.</p>
<p>Own Id: OTP-4339</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Optional line-number configure for the megaco flex scanner incorrect.</p>
<p>The intention was that line-numbering could be replaced with
token number in order to improve performance. This did not work
(line-numbers was always chosen). This has no runtime effect. </p>
<p>Own Id: OTP-4336</p>
</item>
<item>
<p>Improved error reporting from the megaco messenger module.</p>
<p>Own Id: OTP-4337</p>
</item>
<item>
<p>Text parsing of type octet string erroneous.</p>
<p>Own Id: OTP-4357</p>
</item>
<item>
<p>A message containing a transaction request without the transaction id value
is incorrectly reported back to the sender with a just an ErrorDescriptor.
The correct behaviour is described in chapter 8.1.1 of RFC 3015.
Now the result will be a transactioReply with transaction id = 0 and an
ErrorDescriptor.</p>
<p>Own Id: OTP-4359</p>
<p>Aux Id: Seq 7330</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.0.3</title>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Handling of comments in text messages incorrect.</p>
<p>For the ordinary text codec comments did not work. For the
flex text codecs, double quoted strings in comments did not
work.</p>
<p>Own Id: OTP-4299</p>
<p>Aux Id: Seq 7330</p>
</item>
<item>
<p>The <c><![CDATA[streams]]></c> field in MediaDescriptor, has been
made optional in order to comply with IGv6 6.50. It does
also mean that the new default value is <c><![CDATA[asn1_NOVALUE]]></c>.</p>
<p>Own Id: OTP-4288</p>
</item>
<item>
<p>The user arguments was not supplied to the callback function
<c><![CDATA[handle_unexpected_trans]]></c> as described by
<seealso marker="megaco_user">megaco_user</seealso>.</p>
<p>Own Id: OTP-4290</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<list type="bulleted">
<item>
<p>The <em>scanner</em> item of system info has been removed and instead
been replaced by <em>text_config</em>. Also no longer contains any MFA info.
From now on, just the text config.</p>
</item>
</list>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.0.2</title>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Added another binary decoder; per_bin.
<br></br>To be able to <em>use</em> the per_bin encoder the ASN.1
application of version 1.3.2 or later is needed for R8B systems.
For R7B01, ASN.1 of version 1.3.1.3 or later must be used.</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>Memory leak in the flex scanner. Message larger then approx.
1000 bytes cannot be decoded. Will cause a core dump!
Note that this will only be a problem <em>if</em> the flex scanner
has been configured as encoding/decoding module!</p>
<p>Own Id: OTP-4236
</p>
</item>
<item>
<p>Fixed Makefile.in for the flex scanner. Removed unnecessary
'-lfl' link option.</p>
<p>Own Id: OTP-4224
</p>
</item>
<item>
<p>Installed source was not placed in their proper (sub-)
directory. </p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.0.1</title>
<section>
<title>Improvements and new features</title>
<p>-</p>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<list type="bulleted">
<item>
<p>The megaco application now forward's unexpected replies.
This is done with a call to
<seealso marker="megaco_user#handle_unexpected_trans">handle_unexpected_trans/3</seealso>.</p>
<p>Own Id: OTP-4212
<br></br>Aux Id: Seq 7181
</p>
</item>
<item>
<p>Megaco leaves entries in the megaco_replies table.</p>
<p>Own Id: OTP-4213
<br></br>Aux Id: Seq 7208
</p>
</item>
</list>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
<section>
<title>Megaco 1.0</title>
<section>
<title>Improvements and new features</title>
<list type="bulleted">
<item>
<p>Flex scanner: Added <em>scanner</em> to system info.</p>
</item>
</list>
</section>
<section>
<title>Fixed bugs and malfunctions</title>
<p>-</p>
</section>
<section>
<title>Incompatibilities</title>
<p>-</p>
</section>
<section>
<title>Known bugs and problems</title>
<p>-</p>
</section>
</section>
</chapter>
