<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
<year>2002</year>
<year>2011</year>
<holder>Ericsson AB, All Rights Reserved</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
The Initial Developer of the Original Code is Ericsson AB.
</legalnotice>
<title>ttb</title>
<prepared>Siri hansen</prepared>
<responsible></responsible>
<docno>1</docno>
<approved></approved>
<checked></checked>
<date>2002-02-25</date>
<rev>PA1</rev>
<file>ttb.sgml</file>
</header>
<module>ttb</module>
<modulesummary>A base for building trace tools for distributed systems.</modulesummary>
<description>
<p>The Trace Tool Builder <c>ttb</c> is a base for building trace
tools for distributed systems.
</p>
<p>When using <c>ttb</c>, <c>dbg</c> shall not be used in parallel.</p>
</description>
<funcs>
<func>
<name>tracer() -> Result</name>
<fsummary>This is equivalent to tracer(node()).</fsummary>
<desc>
<p>This is equivalent to <c>tracer(node())</c>.</p>
</desc>
</func>
<func>
<name>tracer(Nodes) -> Result</name>
<fsummary>This is equivalent to tracer(Nodes,[]).</fsummary>
<desc>
<p>This is equivalent to <c>tracer(Nodes,[])</c>.</p>
</desc>
</func>
<func>
<name>tracer(Nodes,Opts) -> Result</name>
<fsummary>Start a trace port on each given node.</fsummary>
<type>
<v>Result = {ok, ActivatedNodes} | {error,Reason}</v>
<v>Nodes = atom() | [atom()] | all | existing | new</v>
<v>Opts = [Opt]</v>
<v>Opt = {file,Client} | {handler, FormatHandler} | {process_info,PI}</v>
<v>Client = File | {local, File}</v>
<v>File = Filename | Wrap</v>
<v>Filename = string()</v>
<v>Wrap = {wrap,Filename} | {wrap,Filename,Size,Count}</v>
<v>FormatHandler = See format/2</v>
<v>PI = true | false </v>
</type>
<desc>
<p>This function starts a file trace port on all given nodes
and also points the system tracer for sequential tracing to
the same port.
</p>
<p>The given <c>Filename</c> will be prefixed with the node
name. Default <c>Filename</c> is "ttb".
</p>
<p><c>File={wrap,Filename,Size,Count}</c> can be used if
the size of the trace logs must be limited. Default values are
<c>Size=128*1024</c> and <c>Count=8</c>.
</p>
<p>When tracing diskless nodes, <c>ttb</c> must be started
from an external "trace control node" with disk access, and
<c>Client</c> must be <c>{local, File}</c>. All
trace information is then sent to the trace control node where
it is written to file.
</p>
<p>The <c>process_info</c> option indicates if process
information should be collected. If <c>PI = true</c> (which is
default), each process identifier <c>Pid</c> is replaced by a
tuple <c>{Pid,ProcessInfo,Node}</c>, where <c>ProcessInfo</c>
is the process' registered name its globally registered name,
or its initial function. It is possible to turn off this
functionality by setting <c>PI = false</c>.
</p>
</desc>
</func>
<func>
<name>p(Procs,Flags) -> Return</name>
<fsummary>Sets the given trace flags on the given processes.</fsummary>
<type>
<v>Return = {ok,[{Procs,MatchDesc}]}</v>
<v>Procs = Process | [Process] | all | new | existing</v>
<v>Process = pid() | atom() | {global,atom()}</v>
<v>Flags = Flag | [Flag]</v>
</type>
<desc>
<p>This function sets the given trace flags on the given
processes.
</p>
<p>Please turn to the Reference manual for module <c>dbg</c>
for details about the possible trace flags. The parameter
<c>MatchDesc</c> is the same as returned from <c>dbg:p/2</c></p>
<p>Processes can be given as registered names, globally
registered names or process identifiers. If a registered name
is given, the flags are set on processes with this name on all
active nodes.</p>
</desc>
</func>
<func>
<name>tp, tpl, ctp, ctpl, ctpg</name>
<fsummary>Set and clear trace patterns.</fsummary>
<desc>
<p>These functions should be used in combination with the
<c>call</c> trace flag for setting and clearing trace
patterns. When the <c>call</c> trace flag is set on a process,
function calls will be traced on that process if a trace
pattern has been set for the called function. Trace patterns
specifies how to trace a function by using match
specifications. Match specifications are described in the
User's Guide for the erlang runtime system <c>erts</c>.
</p>
<p>These functions are equivalent to the corresponding
functions in <c>dbg</c>, but all calls are stored in the
history. The history buffer makes it easy to create config
files so that the same trace environment can be setup several
times, e.g. if you want to compare two test runs. It also
reduces the amount of typing when using <c>ttb</c> from the
erlang shell.
</p>
<taglist>
<tag><c>tp</c></tag>
<item>Set trace pattern on global function calls</item>
<tag><c>tpl</c></tag>
<item>Set trace pattern on local and global function calls</item>
<tag><c>ctp</c></tag>
<item>Clear trace pattern on local and global function
calls</item>
<tag><c>ctpl</c></tag>
<item>Clear trace pattern on local function calls</item>
<tag><c>ctpg</c></tag>
<item>Clear trace pattern on global function calls</item>
</taglist>
</desc>
</func>
<func>
<name>list_history() -> History</name>
<fsummary>Returns all calls stored in history</fsummary>
<type>
<v>History = [{N,Func,Args}]</v>
</type>
<desc>
<p>All calls to <c>ttb</c> is stored in the history. This
function returns the current content of the history. Any entry
can be re-executed with <c>run_history/1</c> or stored in a
config file with <c>write_config/2/3</c>.</p>
</desc>
</func>
<func>
<name>run_history(N) -> ok | {error, Reason}</name>
<fsummary>Executes one entry of the history</fsummary>
<type>
<v>N = integer() | [integer()]</v>
</type>
<desc>
<p>Executes the given entry or entries from the history
list. History can be listed with <c>list_history/0</c>.</p>
</desc>
</func>
<func>
<name>write_config(ConfigFile,Config)</name>
<fsummary>Equivalent to write_config(ConfigFile,Config,[]).</fsummary>
<desc>
<p>Equivalent to <c>write_config(ConfigFile,Config,[])</c>.</p>
</desc>
</func>
<func>
<name>write_config(ConfigFile,Config,Opt) -> ok | {error,Reason}</name>
<fsummary>Creates a config file.</fsummary>
<type>
<v>ConfigFile = string()</v>
<v>Config = all | [integer()] | [{Mod,Func,Args}]</v>
<v>Mod = atom()</v>
<v>Func = atom()</v>
<v>Args = [term()]</v>
<v>Opt = [] | [append]</v>
</type>
<desc>
<p>This function creates or extends a config file which can be
used for restoring a specific configuration later.
</p>
<p>The content of the config file can either be fetched from
the history or given directly as a list of
<c>{Mod,Func,Args}</c>.
</p>
<p>If the complete history is to be stored in the config file
<c>Config</c> should be <c>all</c>. If only a selected number
of entries from the history should be stored, <c>Config</c>
should be a list of integers pointing out the entries to be
stored.
</p>
<p>If <c>Opt</c> is not given or if it is <c>[]</c>,
<c>ConfigFile</c> is deleted and a new file is created. If
<c>Opt = [append]</c>, <c>ConfigFile</c> will not be deleted.
The new information will be appended at the end of the file.</p>
</desc>
</func>
<func>
<name>run_config(ConfigFile) -> ok | {error,Reason}</name>
<fsummary>Executes all entries in a config file.</fsummary>
<type>
<v>ConfigFile = string()</v>
</type>
<desc>
<p>Executes all entries in the given config file.</p>
</desc>
</func>
<func>
<name>run_config(ConfigFile,NumList) -> ok | {error,Reason}</name>
<fsummary>Executes selected entries from a config file.</fsummary>
<type>
<v>ConfigFile = string()</v>
<v>NumList = [integer()]</v>
</type>
<desc>
<p>Executes selected entries from the given config
file. <c>NumList</c> is a list of integers pointing out the
entries to be executed.
</p>
<p>The content of a config file can be listed with
<c>list_config/1</c>.</p>
</desc>
</func>
<func>
<name>list_config(ConfigFile) -> Config | {error,Reason}</name>
<fsummary>Lists all entries in a config file.</fsummary>
<type>
<v>ConfigFile = string()</v>
<v>Config = [{N,Func,Args}]</v>
</type>
<desc>
<p>Lists all entries in the given config file.</p>
</desc>
</func>
<func>
<name>write_trace_info(Key,Info) -> ok</name>
<fsummary>Writes any information to the <c>.ti</c>file.</fsummary>
<type>
<v>Key = term()</v>
<v>Info = Data | fun() -> Data</v>
<v>Data = term()</v>
</type>
<desc>
<p>The <c>.ti</c> file contains <c>{Key,ValueList}</c>
tuples. This function adds <c>Data</c> to the ValueList
associated with <c>Key</c>. All information written with this
function will be included in the call to the format handler.</p>
</desc>
</func>
<func>
<name>seq_trigger_ms() -> MatchSpec</name>
<fsummary>Equivalent to seq_trigger_ms(all)</fsummary>
<desc>
<p>Equivalent to <c>seq_trigger_ms(all)</c></p>
</desc>
</func>
<func>
<name>seq_trigger_ms(Flags) -> MatchSpec</name>
<fsummary>Returns a match_spec() which starts sequential tracing</fsummary>
<type>
<v>MatchSpec = match_spec()</v>
<v>Flags = all | SeqTraceFlag | [SeqTraceFlag]</v>
<v>SeqTraceFlag = atom()</v>
</type>
<desc>
<p>A match specification can turn on or off sequential
tracing. This function returns a match specification which
turns on sequential tracing with the given <c>Flags</c>.
</p>
<p>This match specification can be given as the last argument
to <c>tp</c> or <c>tpl</c>. The activated <c>Item</c> will
then become a <em>trigger</em> for sequential tracing. This
means that if the item is called on a process with the
<c>call</c> trace flag set, the process will be "contaminated"
with the seq_trace token.
</p>
<p>If <c>Flags = all</c>, all possible flags are set.
</p>
<p>Please turn to the reference manual for the
<em><c>seq_trace</c></em> module in the <em><c>kernel</c></em>
application to see the possible values for
<c>SeqTraceFlag</c>. For a description of the match_spec()
syntax, please turn to the <em>User's guide</em> for the
runtime system (<em>erts</em>). The chapter <em>Match Specification in Erlang</em> explains the general match
specification "language".
</p>
<note>
<p>The <em>system tracer</em> for sequential tracing is
automatically initiated by <c>ttb</c> when a trace port is
started with <c>ttb:tracer/0/1/2</c>.</p>
</note>
<p>Example of how to use the <c>seq_trigger_ms/0/1</c> function:</p>
<code type="none">
(tiger@durin)5> ttb:tracer().
{ok,[tiger@durin]}
(tiger@durin)6> ttb:p(all,call).
{ok,{[all],[call]}}
(tiger@durin)7> ttb:tp(mod,func,ttb:seq_trigger_ms()).
{ok,[{matched,1},{saved,1}]}
(tiger@durin)8> </code>
<p>Whenever <c>mod:func(...)</c> is called after this, the
seq_trace token will be set on the executing process.</p>
</desc>
</func>
<func>
<name>stop()</name>
<fsummary>Equivalent to stop([])</fsummary>
<desc>
<p>Equivalent to <c>stop([])</c>.</p>
</desc>
</func>
<func>
<name>stop(Opts) -> stopped</name>
<fsummary>Stop tracing and fetch/format logs from all nodes</fsummary>
<type>
<v>Opts = [Opt]</v>
<v>Opt = fetch | format</v>
</type>
<desc>
<p>Stops tracing on all nodes.
</p>
<p>The <c>fetch</c> option indicates that trace logs shall be
collected from all nodes after tracing is stopped. This option
is useful if nodes on remote machines are traced. Logs and
trace information files are then sent to the trace control
node and stored in a directory named
<c>ttb_upload-Timestamp</c>, where <c>Timestamp</c> is on the
form <c>yyyymmdd-hhmmss</c>. Even logs from nodes on the same
machine as the trace control node are moved to this directory.
</p>
<p>The <c>format</c> option indicates that the trace logs
shall be formatted after tracing is stopped. Note that this
option also implies the <c>fetch</c> option, i.e. logs are
collected in a new directory on the trace control node before
formatting. All logs in the directory will be merged.</p>
</desc>
</func>
<func>
<name>format(File)</name>
<fsummary>Same as <c>format(File,[])</c>.</fsummary>
<desc>
<p>Same as <c>format(File,[])</c>.</p>
</desc>
</func>
<func>
<name>format(File,Options) -> ok | {error, Reason}</name>
<fsummary>Format a binary trace log</fsummary>
<type>
<v>File = string() | [string()]</v>
<d>This can be the name of a binary log, a list of such logs or the name of a directory containing one or more binary logs.</d>
<v>Options = [Opt]</v>
<v>Opt = {out,Out} | {handler,FormatHandler}</v>
<v>Out = standard_io | string()</v>
<v>FormatHandler = {Function, InitialState} | et</v>
<v>Function = fun(Fd,Trace,TraceInfo,State) -> State</v>
<v>Fd = standard_io | FileDescriptor</v>
<d>This is the file descriptor of the destination file <c>Out</c></d>
<v>Trace = tuple()</v>
<d>This is the trace message. Please turn to the Reference manual for the <c>erlang</c>module for details.</d>
<v>TraceInfo = [{Key,ValueList}]</v>
<d>This includes the keys <c>flags</c>, <c>client</c>and <c>node</c>, and if <c>handler</c>is given as option to the tracer function, this is also included. In addition all information written with the <c>write_trace_info/2</c>function is included. </d>
</type>
<desc>
<p>Reads the given binary trace log(s). If a directory or a
list of logs is given and the <c>timestamp</c> flag was set
during tracing, the trace messages from the different logs are
merged according to the timestamps.
</p>
<p>If <c>FormatHandler = {Function,InitialState}</c>,
<c>Function</c> will be called for each trace message. If
<c>FormatHandler = et</c>, <c>et_viewer</c> in the <em>Event Tracer</em> application (<c>et</c>) is used for presenting the
trace log graphically. <c>ttb</c> provides a few different
filters which can be selected from the Filter menu in the
<c>et_viewer</c>. If <c>FormatHandler</c> is not given, a
default handler is used which presents each trace message as a
line of text.
</p>
<p>If <c>Out</c> is given, <c>FormatHandler</c> gets the
filedescriptor to <c>Out</c> as the first parameter.
</p>
<p><c>Out</c> is ignored if <c>FormatHandler = et</c>.
</p>
<p>Wrap logs can be formatted one by one or all in one go. To
format one of the wrap logs in a set, give the exact name of
the file. To format the whole set of wrap logs, give the name
with '*' instead of the wrap count. See examples in the
<c>ttb</c> User's Guide.</p>
</desc>
</func>
</funcs>
</erlref>
