%%--------------------------------------------------------------------
%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 1997-2015. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
%% compliance with the License. You should have received a copy of the
%% Erlang Public License along with this software. If not, it can be
%% retrieved online at http://www.erlang.org/.
%%
%% Software distributed under the License is distributed on an "AS IS"
%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
%% the License for the specific language governing rights and limitations
%% under the License.
%%%% %CopyrightEnd%
%%
%%
%%-----------------------------------------------------------------
%% File: orber_socket.erl
%%
%% Description:
%% This file contains a standard interface to the sockets to handle the differences
%% between the implementations used.
%%
%%-----------------------------------------------------------------
-module(orber_socket).
-include_lib("orber/include/corba.hrl").
-include_lib("orber/src/orber_iiop.hrl").
%%-----------------------------------------------------------------
%% External exports
%%-----------------------------------------------------------------
-export([start/0, connect/4, listen/3, listen/4, accept/2, accept/3, write/3,
controlling_process/3, close/2, peername/2, sockname/2,
peerdata/2, peercert/2, sockdata/2, setopts/3,
clear/2, shutdown/3, post_accept/2, post_accept/3,
get_ip_family_opts/1]).
%%-----------------------------------------------------------------
%% Internal exports
%%-----------------------------------------------------------------
-export([]).
%%-----------------------------------------------------------------
%% Internal defines
%%-----------------------------------------------------------------
-define(DEBUG_LEVEL, 6).
%%-----------------------------------------------------------------
%% External functions
%%-----------------------------------------------------------------
start() ->
inet_db:start().
%%-----------------------------------------------------------------
%% Invoke the required setopts (i.e., inet or ssl)
setopts(normal, Socket, Opts) ->
inet:setopts(Socket, Opts);
setopts(ssl, Socket, Opts) ->
ssl:setopts(Socket, Opts).
%%-----------------------------------------------------------------
%% Connect to IIOP Port at Host in CDR mode, in order to
%% establish a connection.
%%
connect(Type, Host, Port, Options) ->
Timeout = orber:iiop_setup_connection_timeout(),
Generation = orber_env:ssl_generation(),
Options1 = check_options(Type, Options, Generation),
Options2 =
case Type of
normal ->
[{keepalive, orber_env:iiop_out_keepalive()}|Options1];
_ ->
Options1
end,
case orber:iiop_out_ports() of
{Min, Max} when Type == normal ->
multi_connect(get_port_sequence(Min, Max), orber_env:iiop_out_ports_attempts(),
Type, Host, Port, [binary, {reuseaddr, true},
{packet,cdr}| Options2], Timeout);
{Min, Max} when Generation > 2 ->
multi_connect(get_port_sequence(Min, Max), orber_env:iiop_out_ports_attempts(),
Type, Host, Port, [binary, {reuseaddr, true},
{packet,cdr}| Options2], Timeout);
{Min, Max} ->
%% reuseaddr not available for older SSL versions
multi_connect(get_port_sequence(Min, Max), orber_env:iiop_out_ports_attempts(),
Type, Host, Port, [binary, {packet,cdr}| Options2], Timeout);
_ ->
connect(Type, Host, Port, [binary, {packet,cdr}| Options2], Timeout)
end.
connect(normal, Host, Port, Options, Timeout) ->
case catch gen_tcp:connect(Host, Port, Options, Timeout) of
{ok, Socket} ->
Socket;
{error, timeout} ->
orber:dbg("[~p] orber_socket:connect(normal, ~p, ~p, ~p);~n"
"Timeout after ~p msec.",
[?LINE, Host, Port, Options, Timeout], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{minor=(?ORBER_VMCID bor 4),
completion_status=?COMPLETED_NO});
Error ->
orber:dbg("[~p] orber_socket:connect(normal, ~p, ~p, ~p);~n"
"Failed with reason: ~p",
[?LINE, Host, Port, Options, Error], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end;
connect(ssl, Host, Port, Options, Timeout) ->
case catch ssl:connect(Host, Port, Options, Timeout) of
{ok, Socket} ->
Socket;
{error, timeout} ->
orber:dbg("[~p] orber_socket:connect(ssl, ~p, ~p, ~p);~n"
"Timeout after ~p msec.",
[?LINE, Host, Port, Options, Timeout], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{minor=(?ORBER_VMCID bor 4),
completion_status=?COMPLETED_NO});
Error ->
orber:dbg("[~p] orber_socket:connect(ssl, ~p, ~p, ~p);~n"
"Failed with reason: ~p",
[?LINE, Host, Port, Options, Error], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end.
multi_connect([], _Retries, Type, Host, Port, Options, _) ->
orber:dbg("[~p] orber_socket:multi_connect(~p, ~p, ~p, ~p);~n"
"Unable to use any of the sockets defined by 'iiop_out_ports'.~n"
"Either all ports are in use or to many connections already exists.",
[?LINE, Type, Host, Port, Options], ?DEBUG_LEVEL),
corba:raise(#'IMP_LIMIT'{minor=(?ORBER_VMCID bor 1), completion_status=?COMPLETED_NO});
multi_connect([CurrentPort|Rest], Retries, normal, Host, Port, Options, Timeout) ->
case catch gen_tcp:connect(Host, Port, [{port, CurrentPort}|Options], Timeout) of
{ok, Socket} ->
Socket;
{error, timeout} when Retries =< 1 ->
orber:dbg("[~p] orber_socket:multi_connect(normal, ~p, ~p, ~p);~n"
"Timeout after ~p msec.",
[?LINE, Host, Port, [{port, CurrentPort}|Options],
Timeout], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{minor=(?ORBER_VMCID bor 4),
completion_status=?COMPLETED_NO});
_ ->
multi_connect(Rest, Retries - 1, normal, Host, Port, Options, Timeout)
end;
multi_connect([CurrentPort|Rest], Retries, ssl, Host, Port, Options, Timeout) ->
case catch ssl:connect(Host, Port, [{port, CurrentPort}|Options], Timeout) of
{ok, Socket} ->
Socket;
{error, timeout} when Retries =< 1 ->
orber:dbg("[~p] orber_socket:multi_connect(ssl, ~p, ~p, ~p);~n"
"Timeout after ~p msec.",
[?LINE, Host, Port, [{port, CurrentPort}|Options],
Timeout], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{minor=(?ORBER_VMCID bor 4),
completion_status=?COMPLETED_NO});
_ ->
multi_connect(Rest, Retries - 1, ssl, Host, Port, Options, Timeout)
end.
get_port_sequence(Min, Max) ->
case orber_env:iiop_out_ports_random() of
true ->
Seq = lists:seq(Min, Max),
random_sequence((Max - Min) + 1, Seq, []);
_ ->
lists:seq(Min, Max)
end.
random_sequence(0, _, Acc) ->
Acc;
random_sequence(Length, Seq, Acc) ->
Nth = rand:uniform(Length),
Value = lists:nth(Nth, Seq),
NewSeq = lists:delete(Value, Seq),
random_sequence(Length-1, NewSeq, [Value|Acc]).
%%-----------------------------------------------------------------
%% Create a listen socket at Port in CDR mode for
%% data connection.
%%
listen(Type, Port, Options) ->
listen(Type, Port, Options, true).
listen(normal, Port, Options, Exception) ->
Options1 = check_options(normal, Options, 0),
Backlog = orber:iiop_backlog(),
Keepalive = orber_env:iiop_in_keepalive(),
Options2 = case orber:iiop_max_in_requests() of
infinity ->
Options1;
_MaxRequests ->
[{active, once}|Options1]
end,
Options3 = case orber_env:iiop_packet_size() of
infinity ->
Options2;
MaxSize ->
[{packet_size, MaxSize}|Options2]
end,
Options4 = [binary, {packet,cdr}, {keepalive, Keepalive},
{reuseaddr,true}, {backlog, Backlog} |
Options3],
case catch gen_tcp:listen(Port, Options4) of
{ok, ListenSocket} ->
{ok, ListenSocket, check_port(Port, normal, ListenSocket)};
{error, Reason} when Exception == false ->
{error, Reason};
{error, eaddrinuse} ->
orber:dbg("[~p] orber_socket:listen(normal, ~p, ~p);~n"
"Looks like the listen port is already in use.~n"
"Check if another Orber is started~n"
"on the same node and uses the same listen port (iiop_port). But it may also~n"
"be used by any other application; confirm with 'netstat'.",
[?LINE, Port, Options4], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO});
Error ->
orber:dbg("[~p] orber_socket:listen(normal, ~p, ~p);~n"
"Failed with reason: ~p",
[?LINE, Port, Options4, Error], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end;
listen(ssl, Port, Options, Exception) ->
Backlog = orber:iiop_ssl_backlog(),
Generation = orber_env:ssl_generation(),
Options1 = check_options(ssl, Options, Generation),
Options2 = case orber:iiop_max_in_requests() of
infinity ->
Options1;
_MaxRequests ->
[{active, once}|Options1]
end,
Options3 = case orber_env:iiop_packet_size() of
infinity ->
Options2;
MaxSize ->
[{packet_size, MaxSize}|Options2]
end,
Options4 = if
Generation > 2 ->
[{reuseaddr, true} |Options3];
true ->
Options3
end,
Options5 = [binary, {packet,cdr}, {backlog, Backlog} | Options4],
case catch ssl:listen(Port, Options5) of
{ok, ListenSocket} ->
{ok, ListenSocket, check_port(Port, ssl, ListenSocket)};
{error, Reason} when Exception == false ->
{error, Reason};
{error, eaddrinuse} ->
orber:dbg("[~p] orber_socket:listen(ssl, ~p, ~p);~n"
"Looks like the listen port is already in use. Check if~n"
"another Orber is started on the same node and uses the~n"
"same listen port (iiop_port). But it may also~n"
"be used by any other application; confirm with 'netstat'.",
[?LINE, Port, Options5], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO});
Error ->
orber:dbg("[~p] orber_socket:listen(ssl, ~p, ~p);~n"
"Failed with reason: ~p",
[?LINE, Port, Options5, Error], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end.
%%-----------------------------------------------------------------
%% Wait in accept on the socket
%%
accept(Type, ListenSocket) ->
accept(Type, ListenSocket, infinity).
accept(normal, ListenSocket, _Timeout) ->
case catch gen_tcp:accept(ListenSocket) of
{ok, S} ->
S;
Error ->
orber:dbg("[~p] orber_socket:accept(normal, ~p);~n"
"Failed with reason: ~p",
[?LINE, ListenSocket, Error], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end;
accept(ssl, ListenSocket, Timeout) ->
case catch ssl:transport_accept(ListenSocket, Timeout) of
{ok, S} ->
S;
Error ->
orber:dbg("[~p] orber_socket:accept(ssl, ~p);~n"
"Failed with reason: ~p",
[?LINE, ListenSocket, Error], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end.
post_accept(Type, Socket) ->
post_accept(Type, Socket, infinity).
post_accept(normal, _Socket, _Timeout) ->
ok;
post_accept(ssl, Socket, Timeout) ->
case catch ssl:ssl_accept(Socket, Timeout) of
ok ->
ok;
Error ->
orber:dbg("[~p] orber_socket:post_accept(ssl, ~p);~n"
"Failed with reason: ~p",
[?LINE, Socket, Error], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end.
%%-----------------------------------------------------------------
%% Close the socket
%%
close(normal, Socket) ->
(catch gen_tcp:close(Socket));
close(ssl, Socket) ->
(catch ssl:close(Socket)).
%%-----------------------------------------------------------------
%% Write to socket
%%
write(normal, Socket, Bytes) ->
gen_tcp:send(Socket, Bytes);
write(ssl, Socket, Bytes) ->
ssl:send(Socket, Bytes).
%%-----------------------------------------------------------------
%% Change the controlling process for the socket
%%
controlling_process(normal, Socket, Pid) ->
gen_tcp:controlling_process(Socket, Pid);
controlling_process(ssl, Socket, Pid) ->
ssl:controlling_process(Socket, Pid).
%%-----------------------------------------------------------------
%% Get peername
%%
peername(normal, Socket) ->
inet:peername(Socket);
peername(ssl, Socket) ->
ssl:peername(Socket).
%%-----------------------------------------------------------------
%% Get peercert
%%
peercert(ssl, Socket) ->
ssl:peercert(Socket);
peercert(Type, _Socket) ->
orber:dbg("[~p] orber_socket:peercert(~p);~n"
"Only available for SSL sockets.",
[?LINE, Type], ?DEBUG_LEVEL),
{error, ebadsocket}.
%%-----------------------------------------------------------------
%% Get peerdata
%%
peerdata(normal, Socket) ->
create_data(inet:peername(Socket));
peerdata(ssl, Socket) ->
create_data(ssl:peername(Socket)).
%%-----------------------------------------------------------------
%% Get sockname
%%
sockname(normal, Socket) ->
inet:sockname(Socket);
sockname(ssl, Socket) ->
ssl:sockname(Socket).
%%-----------------------------------------------------------------
%% Get sockdata
%%
sockdata(normal, Socket) ->
create_data(inet:sockname(Socket));
sockdata(ssl, Socket) ->
create_data(ssl:sockname(Socket)).
create_data({ok, {Addr, Port}}) ->
{orber_env:addr2str(Addr), Port};
create_data(What) ->
orber:dbg("[~p] orber_socket:peername() or orber_socket:sockname();~n"
"Failed with reason: ~p", [?LINE, What], ?DEBUG_LEVEL),
{"Unable to lookup peer- or sockname", 0}.
%%-----------------------------------------------------------------
%% Shutdown Connection
%% How = read | write | read_write
shutdown(normal, Socket, How) ->
gen_tcp:shutdown(Socket, How);
shutdown(ssl, Socket, How) ->
Generation = orber_env:ssl_generation(),
if
Generation > 2 ->
ssl:shutdown(Socket, How);
How == read_write ->
%% Older versions of SSL do no support shutdown.
%% For now we'll use this solution instead.
close(ssl, Socket);
true ->
{error, undefined}
end.
%%-----------------------------------------------------------------
%% Remove Messages from queue
%%
clear(normal, Socket) ->
tcp_clear(Socket);
clear(ssl, Socket) ->
ssl_clear(Socket).
%% Inet also checks for the following messages:
%% * {S, {data, Data}}
%% * {inet_async, S, Ref, Status},
%% * {inet_reply, S, Status}
%% SSL doesn't.
tcp_clear(Socket) ->
receive
{tcp, Socket, _Data} ->
tcp_clear(Socket);
{tcp_closed, Socket} ->
tcp_clear(Socket);
{tcp_error, Socket, _Reason} ->
tcp_clear(Socket)
after 0 ->
ok
end.
ssl_clear(Socket) ->
receive
{ssl, Socket, _Data} ->
ssl_clear(Socket);
{ssl_closed, Socket} ->
ssl_clear(Socket);
{ssl_error, Socket, _Reason} ->
ssl_clear(Socket)
after 0 ->
ok
end.
%%-----------------------------------------------------------------
%% Check Port. If the user supplies 0 we pick any vacant port. But then
%% we must change the associated environment variable
check_port(0, normal, Socket) ->
case inet:port(Socket) of
{ok, Port} ->
orber:configure_override(iiop_port, Port),
Port;
What ->
orber:dbg("[~p] orber_socket:check_port(~p);~n"
"Unable to extract the port number via inet:port/1~n",
[?LINE, What], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end;
check_port(0, ssl, Socket) ->
case ssl:sockname(Socket) of
{ok, {_Address, Port}} ->
orber:configure_override(iiop_ssl_port, Port),
Port;
What ->
orber:dbg("[~p] orber_socket:check_port(~p);~n"
"Unable to extract the port number via ssl:sockname/1~n",
[?LINE, What], ?DEBUG_LEVEL),
corba:raise(#'COMM_FAILURE'{completion_status=?COMPLETED_NO})
end;
check_port(Port, _, _) ->
Port.
%%-----------------------------------------------------------------
%% Check Options.
check_options(normal, Options, _Generation) ->
Options;
check_options(ssl, Options, Generation) ->
if
Generation > 2 ->
[{ssl_imp, new}|Options];
true ->
[{ssl_imp, old}|Options]
end.
%%-----------------------------------------------------------------
%% Check IP Family.
get_ip_family_opts(Host) ->
case inet:parse_address(Host) of
{ok, {_,_,_,_}} ->
[inet];
{ok, {_,_,_,_,_,_,_,_}} ->
[inet6];
{error, einval} ->
check_family_for_name(Host, orber_env:ip_version())
end.
check_family_for_name(Host, inet) ->
case inet:getaddr(Host, inet) of
{ok, _Address} ->
[inet];
{error, _} ->
case inet:getaddr(Host, inet6) of
{ok, _Address} ->
[inet6];
{error, _} ->
[inet]
end
end;
check_family_for_name(Host, inet6) ->
case inet:getaddr(Host, inet6) of
{ok, _Address} ->
[inet6];
{error, _} ->
case inet:getaddr(Host, inet) of
{ok, _Address} ->
[inet];
{error, _} ->
[inet6]
end
end.
