%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2008-2016. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%% @doc egd_render
%%
-module(egd_render).
-export([binary/1, binary/2]).
-export([eps/1]).
-compile(inline).
-export([line_to_linespans/3]).
-include("egd.hrl").
-define('DummyC',0).
binary(Image) ->
binary(Image, opaque).
binary(Image, Type) ->
parallel_binary(precompile(Image),Type).
parallel_binary(Image = #image{ height = Height },Type) ->
case erlang:min(erlang:system_info(schedulers), Height) of
1 ->
% if the height or the number of schedulers is 1
% do the scanlines in this process.
W = Image#image.width,
Bg = Image#image.background,
Os = Image#image.objects,
erlang:list_to_binary([scanline(Y, Os, {0,0,W - 1, Bg}, Type)
|| Y <- lists:seq(1, Height)]);
Np ->
Pids = start_workers(Np, Type),
Handler = handle_workers(Height, Pids),
init_workers(Image, Handler, Pids),
Res = receive_binaries(Height),
finish_workers(Pids),
Res
end.
start_workers(Np, Type) ->
start_workers(Np, Type, []).
start_workers( 0, _, Pids) -> Pids;
start_workers(Np, Type, Pids) when Np > 0 ->
start_workers(Np - 1, Type, [spawn_link(fun() -> worker(Type) end)|Pids]).
worker(Type) ->
receive
{Pid, data, #image{ objects = Os, width = W, background = Bg }} ->
worker(Os, W, Bg, Type, Pid)
end.
worker(Objects, Width, Bg, Type, Collector) ->
receive
{Pid, scan, {Ys, Ye}} ->
lists:foreach(fun
(Y) ->
Bin = erlang:list_to_binary(scanline(Y, Objects, {0,0,Width - 1, Bg}, Type)),
Collector ! {scan, Y, Bin}
end, lists:seq(Ys,Ye)),
Pid ! {self(), scan_complete},
worker(Objects, Width, Bg, Type, Collector);
{Pid, scan, Y} ->
Bin = erlang:list_to_binary(scanline(Y, Objects, {0,0,Width - 1, Bg}, Type)),
Collector ! {scan, Y, Bin},
Pid ! {self(), scan_complete},
worker(Objects, Width, Bg, Type, Collector);
{_, done} ->
ok
end.
init_workers(_Image, _Handler, []) -> ok;
init_workers(Image, Handler, [Pid|Pids]) ->
Pid ! {self(), data, Image},
Handler ! {Pid, scan_complete},
init_workers(Image, Handler, Pids).
handle_workers(H, Pids) ->
spawn_link(fun() -> handle_workers(H, H, length(Pids)) end).
handle_workers(_, 0, _) -> ok;
handle_workers(H, Hi, Np) when H > 0 ->
N = trunc(Hi/(2*Np)),
receive
{Pid, scan_complete} ->
if N < 2 ->
Pid ! {self(), scan, Hi},
handle_workers(H, Hi - 1, Np);
true ->
Pid ! {self(), scan, {Hi - N, Hi}},
handle_workers(H, Hi - 1 - N, Np)
end
end.
finish_workers([]) -> ok;
finish_workers([Pid|Pids]) ->
Pid ! {self(), done},
finish_workers(Pids).
receive_binaries(H) ->
receive_binaries(H, []).
receive_binaries(0, Bins) -> erlang:list_to_binary(Bins);
receive_binaries(H, Bins) when H > 0 ->
receive
{scan, H, Bin} ->
receive_binaries(H - 1, [Bin|Bins])
end.
scanline(Y, Os, {_,_,Width,_}=LSB, Type) ->
OLSs = parse_objects_on_line(Y-1, Width, Os),
RLSs = resulting_line_spans([LSB|OLSs],Type),
[ lists:duplicate(Xr - Xl + 1, <<(trunc(R*255)):8,(trunc(G*255)):8,(trunc(B*255)):8>>) || {_,Xl, Xr, {R,G,B,_}} <- RLSs ].
resulting_line_spans(LSs,Type) ->
%% Build a list of "transitions" from left to right.
Trans = line_spans_to_trans(LSs),
%% Convert list of "transitions" to linespans.
trans_to_line_spans(Trans,Type).
line_spans_to_trans(LSs) ->
line_spans_to_trans(LSs,[],0).
line_spans_to_trans([],Db,_) ->
lists:sort(Db);
line_spans_to_trans([{_,L,R,C}|LSs],Db,Z) ->
line_spans_to_trans(LSs,[{{L,Z,start},C},{{R+1,Z,stop},C}|Db],Z+1).
trans_to_line_spans(Trans,Type) ->
trans_to_line_spans(simplify_trans(Trans,Type,[],{0.0,0.0,0.0,0.0},[])).
trans_to_line_spans(SimpleTrans) ->
trans_to_line_spans1(SimpleTrans,[]).
trans_to_line_spans1([],Spans) ->
Spans;
trans_to_line_spans1([_],Spans) ->
Spans;
trans_to_line_spans1([{L1,_},{L2,C2}|SimpleTrans],Spans) ->
%% We are going backwards now...
trans_to_line_spans1([{L2,C2}|SimpleTrans],[{?DummyC,L2,L1-1,C2}|Spans]).
simplify_trans([],_,_,_,Acc) ->
Acc;
simplify_trans([{{L,_,_},_}|_] = Trans,Type,Layers,OldC,Acc) ->
{NextTrans,RestTrans} =
lists:splitwith(fun({{L1,_,_},_}) when L1 == L ->
true;
(_) ->
false
end, Trans),
{C,NewLayers} = color(NextTrans,Layers,Type,OldC),
case OldC of
C -> %% No change in color, so transition unnecessary.
simplify_trans(RestTrans,Type,NewLayers,OldC,Acc);
_ ->
simplify_trans(RestTrans,Type,NewLayers,C,[{L,C}|Acc])
end.
color(Trans,Layers,Type,OldC) ->
case modify_layers(Layers,Trans) of
Layers ->
{OldC,Layers};
NewLayers ->
{color(NewLayers,Type),NewLayers}
end.
color([],_) -> {0.0,0.0,0.0,0.0};
color([{_,C}|_],opaque) -> C;
color(Layers,alpha) -> color1({0.0,0.0,0.0,0.0},Layers).
color1(Color,[]) -> Color;
color1(Color,[{_,C}|Layers]) -> color1(alpha_blend(Color,C),Layers).
modify_layers(Layers,[]) -> Layers;
modify_layers(Layers,[{{_,Z,start},C}|Trans]) ->
modify_layers(add_layer(Layers, Z, C), Trans);
modify_layers(Layers,[{{_,Z,stop },C}|Trans]) ->
modify_layers(remove_layer(Layers, Z, C), Trans).
add_layer([{Z1,_}=H|Layers],Z,C) when Z1 > Z ->
[H|add_layer(Layers,Z,C)];
add_layer(Layers,Z,C) ->
[{Z,C}|Layers].
remove_layer(Layers,Z,C) ->
Layers -- [{Z,C}].
alpha_blend({R1,G1,B1,A1}, {R2,G2,B2,A2}) when is_float(A1), is_float(A2)->
Beta = A2*(1.0 - A1),
A = A1 + Beta,
R = R1*A1 + R2*Beta,
G = G1*A1 + G2*Beta,
B = B1*A1 + B2*Beta,
{R,G,B,A}.
parse_objects_on_line(Y, Width, Objects) ->
parse_objects_on_line(Y, 1, Width, Objects, []).
parse_objects_on_line(_Y, _Z, _, [], Out) -> lists:flatten(Out);
parse_objects_on_line(Y, Z, Width, [O|Os], Out) ->
case is_object_on_line(O, Y) of
false ->
parse_objects_on_line(Y, Z + 1, Width, Os, Out);
true ->
OLs = object_line_data(O,Y,Z),
TOLs = trim_object_line_data(OLs, Width),
parse_objects_on_line(Y, Z + 1, Width, Os, [TOLs|Out])
end.
trim_object_line_data(OLs, Width) ->
trim_object_line_data(OLs, Width, []).
trim_object_line_data([], _, Out) -> Out;
trim_object_line_data([{_, Xl, _, _}|OLs], Width, Out) when Xl > Width ->
trim_object_line_data(OLs, Width, Out);
trim_object_line_data([{_, _, Xr, _}|OLs], Width, Out) when Xr < 0 ->
trim_object_line_data(OLs, Width, Out);
trim_object_line_data([{Z, Xl, Xr, C}|OLs], Width, Out) ->
trim_object_line_data(OLs, Width, [{Z, erlang:max(0,Xl), erlang:min(Xr,Width), C}|Out]).
% object_line_data
% In:
% Object :: image_object()
% Y :: index of height
% Z :: index of depth
% Out:
% OLs = [{Z, Xl, Xr, Color}]
% Z = index of height
% Xl = left X index
% Xr = right X index
% Purpose:
% Calculate the length (start and finish index) of an objects horizontal
% line given the height index.
object_line_data(#image_object{type=rectangle,
span={X0,Y0,X1,Y1}, color=C}, Y, Z) ->
if
Y0 =:= Y ; Y1 =:= Y ->
[{Z, X0, X1, C}];
true ->
[{Z, X0, X0, C},
{Z, X1, X1, C}]
end;
object_line_data(#image_object{type=filled_rectangle,
span={X0, _, X1, _}, color=C}, _Y, Z) ->
[{Z, X0, X1, C}];
object_line_data(#image_object{type=filled_ellipse,
internals={Xr,Yr,Yr2}, span={X0,Y0,X1,Y1}, color=C}, Y, Z) ->
if
X1 - X0 =:= 0; Y1 - Y0 =:= 0 ->
[{Z, X0, X1, C}];
true ->
Yo = trunc(Y - Y0 - Yr),
Yo2 = Yo*Yo,
Xo = math:sqrt((1 - Yo2/Yr2))*Xr,
[{Z, round(X0 - Xo + Xr), round(X0 + Xo + Xr), C}]
end;
object_line_data(#image_object{type=filled_triangle,
intervals=Is, color=C}, Y, Z) ->
case lists:keyfind(Y, 1, Is) of
{Y, Xl, Xr} -> [{Z, Xl, Xr, C}];
false -> []
end;
object_line_data(#image_object{type=line,
intervals=M, color={R,G,B,_}}, Y, Z) ->
case M of
#{Y := Ls} -> [{Z, Xl, Xr, {R,G,B,1.0-C/255}}||{Xl,Xr,C} <- Ls];
_ -> []
end;
object_line_data(#image_object{type=polygon,
color=C, intervals=Is}, Y, Z) ->
[{Z, Xl, Xr, C} || {Yp, Xl, Xr} <- Is, Yp =:= Y];
object_line_data(#image_object{type=text_horizontal,
color=C, intervals=Is}, Y, Z) ->
[{Z, Xl, Xr, C} || {Yg, Xl, Xr} <- Is, Yg =:= Y];
object_line_data(#image_object{type=pixel,
span={X0,_,X1,_}, color=C}, _, Z) ->
[{Z, X0, X1, C}].
is_object_on_line(#image_object{span={_,Y0,_,Y1}}, Y) ->
if Y < Y0; Y > Y1 -> false;
true -> true
end.
%%% primitives to line_spans
%% compile objects to linespans
precompile(#image{objects = Os}=I) ->
I#image{objects = precompile_objects(Os)}.
precompile_objects([]) -> [];
precompile_objects([#image_object{type=line, internals=W, points=[P0,P1]}=O|Os]) ->
[O#image_object{intervals = linespans_to_map(line_to_linespans(P0,P1,W))}|precompile_objects(Os)];
precompile_objects([#image_object{type=filled_triangle, points=[P0,P1,P2]}=O|Os]) ->
[O#image_object{intervals = triangle_ls(P0,P1,P2)}|precompile_objects(Os)];
precompile_objects([#image_object{type=polygon, points=Pts}=O|Os]) ->
[O#image_object{intervals = polygon_ls(Pts)}|precompile_objects(Os)];
precompile_objects([#image_object{type=filled_ellipse, span={X0,Y0,X1,Y1}}=O|Os]) ->
Xr = (X1 - X0)/2,
Yr = (Y1 - Y0)/2,
Yr2 = Yr*Yr,
[O#image_object{internals={Xr,Yr,Yr2}}|precompile_objects(Os)];
precompile_objects([#image_object{type=arc, points=[P0,P1], internals=D}=O|Os]) ->
Es = egd_primitives:arc_to_edges(P0, P1, D),
Ls = lists:foldl(fun ({Ep0,Ep1},M) ->
linespans_to_map(line_to_linespans(Ep0,Ep1,1),M)
end, #{}, Es),
[O#image_object{type=line, intervals=Ls}|precompile_objects(Os)];
precompile_objects([#image_object{type=text_horizontal,
points=[P0], internals={Font,Text}}=O|Os]) ->
[O#image_object{intervals=text_horizontal_ls(P0,Font,Text)}|precompile_objects(Os)];
precompile_objects([O|Os]) ->
[O|precompile_objects(Os)].
% triangle
triangle_ls(P1,P2,P3) ->
% Find top point (or left most top point),
% From that point, two lines will be drawn to the
% other points.
% For each Y step,
% bresenham_line_interval for each of the two lines
% Find the left most and the right most for those lines
% At an end point, a new line to the point already being drawn
% repeat same procedure as above
[Sp1, Sp2, Sp3] = tri_pt_ysort([P1,P2,P3]),
triangle_ls_lp(tri_ls_ysort(line_to_linespans(Sp1,Sp2,1)), Sp2,
tri_ls_ysort(line_to_linespans(Sp1,Sp3,1)), Sp3, []).
% There will be Y mismatches between the two lists since bresenham is not perfect.
% I can be remedied with checking intervals this could however be costly and
% it may not be necessary, depending on how exact we need the points to be.
% It should at most differ by one and endpoints should be fine.
triangle_ls_lp([],_,[],_,Out) -> Out;
triangle_ls_lp(LSs1, P1, [], P2, Out) ->
SLSs = tri_ls_ysort(line_to_linespans(P2,P1,1)),
N2 = length(SLSs),
N1 = length(LSs1),
if
N1 > N2 ->
[_|ILSs] = LSs1,
triangle_ls_lp(ILSs, SLSs, Out);
N2 > N1 ->
[_|ILSs] = SLSs,
triangle_ls_lp(LSs1, ILSs, Out);
true ->
triangle_ls_lp(LSs1, SLSs, Out)
end;
triangle_ls_lp([], P1, LSs2, P2, Out) ->
SLSs = tri_ls_ysort(line_to_linespans(P1,P2,1)),
N1 = length(SLSs),
N2 = length(LSs2),
if
N1 > N2 ->
[_|ILSs] = SLSs,
triangle_ls_lp(ILSs, LSs2, Out);
N2 > N1 ->
[_|ILSs] = LSs2,
triangle_ls_lp(SLSs, ILSs, Out);
true ->
triangle_ls_lp(SLSs, LSs2, Out)
end;
triangle_ls_lp([LS1|LSs1],P1,[LS2|LSs2],P2, Out) ->
{Y, Xl1, Xr1,_Ca1} = LS1,
{_, Xl2, Xr2,_Ca2} = LS2,
Xr = lists:max([Xl1,Xr1,Xl2,Xr2]),
Xl = lists:min([Xl1,Xr1,Xl2,Xr2]),
triangle_ls_lp(LSs1,P1,LSs2,P2,[{Y,Xl,Xr}|Out]).
triangle_ls_lp([],[],Out) -> Out;
triangle_ls_lp([],_,Out) -> Out;
triangle_ls_lp(_,[],Out) -> Out;
triangle_ls_lp([LS1|LSs1], [LS2|LSs2], Out) ->
{Y, Xl1, Xr1, _Ca1} = LS1,
{_, Xl2, Xr2, _Ca2} = LS2,
Xr = lists:max([Xl1,Xr1,Xl2,Xr2]),
Xl = lists:min([Xl1,Xr1,Xl2,Xr2]),
triangle_ls_lp(LSs1,LSs2,[{Y,Xl,Xr}|Out]).
tri_pt_ysort(Pts) ->
% {X,Y}
lists:sort(
fun ({_,Y1},{_,Y2}) ->
if Y1 > Y2 -> false; true -> true end
end, Pts).
tri_ls_ysort(LSs) ->
% {Y, Xl, Xr, Ca}
lists:sort(
fun ({Y1,_,_,_},{Y2,_,_,_}) ->
if Y1 > Y2 -> false; true -> true end
end, LSs).
% polygon_ls
% In:
% Pts :: [{X,Y}]
% Out:
% LSs :: [{Y,Xl,Xr}]
% Purpose:
% Make polygon line spans
% Algorithm:
% 1. Find the left most (lm) point
% 2. Find the two points adjacent to that point
% The tripplet will make a triangle
% 3. Ensure no points lies within the triangle
% 4a.No points within triangle,
% make triangle,
% remove lm point
% 1.
% 4b.point(s) within triangle,
%
polygon_ls(Pts) ->
% Make triangles
Tris = polygon_tri(Pts),
% interval triangles
lists:flatten(polygon_tri_ls(Tris, [])).
polygon_tri_ls([], Out) -> Out;
polygon_tri_ls([{P1,P2,P3}|Tris], Out) ->
polygon_tri_ls(Tris, [triangle_ls(P1,P2,P3)|Out]).
polygon_tri(Pts) ->
polygon_tri(polygon_lm_pt(Pts), []).
polygon_tri([P1,P2,P3],Tris) -> [{P1,P2,P3}|Tris];
polygon_tri([P2,P1,P3|Pts], Tris) ->
case polygon_tri_test(P1,P2,P3,Pts) of
false -> polygon_tri(polygon_lm_pt([P2,P3|Pts]), [{P1,P2,P3}|Tris]);
[LmPt|Ptsn] -> polygon_tri([P2,P1,LmPt,P3|Ptsn], Tris)
end.
polygon_tri_test(P1,P2,P3, Pts) ->
polygon_tri_test(P1,P2,P3, Pts, []).
polygon_tri_test(_,_,_, [], _) -> false;
polygon_tri_test(P1,P2,P3,[Pt|Pts], Ptsr) ->
case point_inside_triangle(Pt, P1,P2,P3) of
false -> polygon_tri_test(P1,P2,P3, Pts, [Pt|Ptsr]);
true -> [Pt|Pts] ++ lists:reverse(Ptsr)
end.
% polygon_lm_pt
% In:
% Pts :: [{X,Y}]
% Out
% LmPts = [{X0,Y0},{Xmin,Y0},{X1,Y1},...]
% Purpose:
% The order of the list is important
% rotate the elements until Xmin is first
% This is not extremly fast.
polygon_lm_pt(Pts) ->
Xs = [X||{X,_}<-Pts],
polygon_lm_pt(Pts, lists:min(Xs), []).
polygon_lm_pt([Pt0,{X,_}=Ptm | Pts], Xmin, Ptsr) when X > Xmin ->
polygon_lm_pt([Ptm|Pts], Xmin, [Pt0|Ptsr]);
polygon_lm_pt(Pts, _, Ptsr) ->
Pts ++ lists:reverse(Ptsr).
% return true if P is inside triangle (p1,p2,p3),
% otherwise false.
points_same_side({P1x,P1y}, {P2x,P2y}, {L1x,L1y}, {L2x,L2y}) ->
((P1x - L1x)*(L2y - L1y) - (L2x - L1x)*(P1y - L1y) *
(P2x - L1x)*(L2y - L1y) - (L2x - L1x)*(P2y - L1y)) >= 0.
point_inside_triangle(P, P1, P2, P3) ->
points_same_side(P, P1, P2, P3) and
points_same_side(P, P2, P1, P3) and
points_same_side(P, P3, P1, P2).
%% [{Y, Xl, Xr}] -> #{Y := [{Xl,Xr}]}
%% Reorganize linspans to a map with Y as key.
linespans_to_map(Ls) ->
linespans_to_map(Ls,#{}).
linespans_to_map([{Y,Xl,Xr,C}|Ls], M) ->
case M of
#{Y := Spans} -> linespans_to_map(Ls, M#{Y := [{Xl,Xr,C}|Spans]});
_ -> linespans_to_map(Ls, M#{Y => [{Xl,Xr,C}]})
end;
linespans_to_map([], M) ->
M.
%% line_to_linespans
%% Anti-aliased thick line
%% Do it CPS style
%% In:
%% P1 :: point()
%% P2 :: point()
%% Out:
%% [{Y,Xl,Xr}]
%%
line_to_linespans({X0,Y0},{X1,Y1},Wd) ->
Dx = abs(X1-X0),
Dy = abs(Y1-Y0),
Sx = if X0 < X1 -> 1; true -> -1 end,
Sy = if Y0 < Y1 -> 1; true -> -1 end,
E0 = Dx - Dy,
Ed = if Dx + Dy =:= 0 -> 1; true -> math:sqrt(Dx*Dx + Dy*Dy) end,
line_to_ls(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E0,Ed,(Wd+1)/2,[]).
line_to_ls(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0) ->
C = max(0, 255*(abs(E - Dx+Dy)/Ed - Wd + 1)),
Ls1 = [{Y0,X0,X0,C}|Ls0],
line_to_ls_sx(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls1,E).
line_to_ls_sx(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls,E2) when 2*E2 > -Dx ->
line_to_ls_sx_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls,E2+Dy,Y0);
line_to_ls_sx(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls,E2) ->
line_to_ls_sy(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls,E2,X0).
line_to_ls_sx_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0,E2,Y) when E2 < Ed*Wd andalso
(Y1 =/= Y orelse Dx > Dy) ->
Y2 = Y + Sy,
C = max(0,255*(abs(E2)/Ed-Wd+1)),
Ls = [{Y2,X0,X0,C}|Ls0],
line_to_ls_sx_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls,E2+Dx,Y2);
line_to_ls_sx_do(X0,_Y0,X1,_Y1,_Dx,_Dy,_Sx,_Sy,_E,_Ed,_Wd,Ls,_E2,_Y) when X0 =:= X1 ->
Ls;
line_to_ls_sx_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls,_E2,_Y) ->
line_to_ls_sy(X0+Sx,Y0,X1,Y1,Dx,Dy,Sx,Sy,E-Dy,Ed,Wd,Ls,E,X0).
line_to_ls_sy(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0,E2,X) when 2*E2 =< Dy ->
line_to_ls_sy_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0,Dx-E2,X);
line_to_ls_sy(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0,_E2,_X) ->
line_to_ls(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0).
line_to_ls_sy_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0,E2,X) when E2 < Ed*Wd andalso
(X1 =/= X orelse Dx < Dy) ->
X2 = X + Sx,
C = max(0,255*(abs(E2)/Ed-Wd+1)),
Ls = [{Y0,X2,X2,C}|Ls0],
line_to_ls_sy_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls,E2+Dy,X2);
line_to_ls_sy_do(_X0,Y0,_X1,Y1,_Dx,_Dy,_Sx,_Sy,_E,_Ed,_Wd,Ls,_E2,_X) when Y0 =:= Y1 ->
Ls;
line_to_ls_sy_do(X0,Y0,X1,Y1,Dx,Dy,Sx,Sy,E,Ed,Wd,Ls0,_E2,_X) ->
line_to_ls(X0,Y0+Sy,X1,Y1,Dx,Dy,Sx,Sy,E+Dx,Ed,Wd,Ls0).
% Text
text_horizontal_ls(Point, Font, Chars) ->
{_Fw,Fh} = egd_font:size(Font),
text_intervals(Point, Fh, Font, Chars, []).
% This is stupid. The starting point is the top left (Ptl) but the font
% offsets is relative to the bottom right origin,
% {Xtl,Ytl} -------------------------
% | |
% | Glyph BoundingBox |
% | -------- |
% | |Bitmap| Gh |
% FH |-Gx0-|Data | |
% | -------- |
% | | |
% | Gy0 |
% | | |
% Glyph (0,0)------------------------- Gxm (Glyph X move)
% FW
% Therefore, we need Yo, which is Yo = FH - Gy0 - Gh,
% Font height minus Glyph Y offset minus Glyph bitmap data boundingbox
% height.
text_intervals( _, _, _, [], Out) -> lists:flatten(Out);
text_intervals({Xtl,Ytl}, Fh, Font, [Code|Chars], Out) ->
{{_Gw, Gh, Gx0, Gy0, Gxm}, LSs} = egd_font:glyph(Font, Code),
% Set offset points from translation matrix to point in TeInVe.
Yo = Fh - Gh + Gy0,
GLSs = text_intervals_vertical({Xtl+Gx0,Ytl+Yo},LSs, []),
text_intervals({Xtl+Gxm,Ytl}, Fh, Font, Chars, [GLSs|Out]).
text_intervals_vertical( _, [], Out) -> Out;
text_intervals_vertical({Xtl, Ytl}, [LS|LSs], Out) ->
H = lists:foldl(
fun ({Xl,Xr}, RLSs) ->
[{Ytl, Xl + Xtl, Xr + Xtl}|RLSs]
end, [], LS),
text_intervals_vertical({Xtl, Ytl+1}, LSs, [H|Out]).
%%% E. PostScript implementation
eps(#image{ objects = Os, width = W, height = H}) ->
list_to_binary([eps_header(W,H),eps_objects(H,Os),eps_footer()]).
eps_objects(H,Os) -> eps_objects(H,Os, []).
eps_objects(_,[], Out) -> lists:flatten(Out);
eps_objects(H,[O|Os], Out) -> eps_objects(H,Os, [eps_object(H,O)|Out]).
eps_object(H,#image_object{ type = text_horizontal, internals = {_Font,Text}, points = [{X,Y}], color={R,G,B,_}}) ->
s("/Times-Roman findfont\n14 scalefont\nsetfont\n~.4f ~.4f ~.4f setrgbcolor\nnewpath\n~p ~p moveto\n(~s) show~n",
[R,G,B,X,H-(Y + 10), Text]);
eps_object(H,#image_object{ type = filled_ellipse, points = [{X1,Y1p},{X2,Y2p}], color={R,G,B,_}}) ->
Y1 = H - Y1p,
Y2 = H - Y2p,
Xr = trunc((X2-X1)/2),
Yr = trunc((Y2-Y1)/2),
Cx = X1 + Xr,
Cy = Y1 + Yr,
s("~.4f ~.4f ~.4f setrgbcolor\nnewpath\n~p ~p ~p ~p 0 360 ellipse fill\n",
[R,G,B,Cx,Cy,Xr,Yr]);
eps_object(H,#image_object{ type = arc, points = [P0, P1], internals = D, color={R,G,B,_}}) ->
Es = egd_primitives:arc_to_edges(P0, P1, D),
[s("~.4f ~.4f ~.4f setrgbcolor\n", [R,G,B])|lists:foldl(fun
({{X1,Y1},{X2,Y2}}, Eps) ->
[s("newpath\n~p ~p moveto\n~p ~p lineto\n1 setlinewidth\nstroke\n", [X1,H-Y1,X2,H-Y2])|Eps]
end, [], Es)];
eps_object(H,#image_object{ type = line, points = [{X1,Y1}, {X2,Y2}], color={R,G,B,_}}) ->
s("~.4f ~.4f ~.4f setrgbcolor\nnewpath\n~p ~p moveto\n~p ~p lineto\n1 setlinewidth\nstroke\n",
[R,G,B,X1,H-Y1,X2,H-Y2]);
eps_object(H,#image_object{ type = rectangle, points = [{X1,Y1}, {X2,Y2}], color={R,G,B,_}}) ->
s("~.4f ~.4f ~.4f setrgbcolor\nnewpath\n~p ~p moveto\n~p ~p lineto\n~p ~p lineto\n~p ~p lineto\n~p ~p lineto\n1 setlinewidth\nstroke\n",
[R,G,B,X1,H-Y1,X2,H-Y1,X2,H-Y2,X1,H-Y2,X1,H-Y1]);
eps_object(H,#image_object{ type = filled_rectangle, points = [{X1,Y1}, {X2,Y2}], color={R,G,B,_}}) ->
s("~.4f ~.4f ~.4f setrgbcolor\nnewpath\n~p ~p moveto\n~p ~p lineto\n~p ~p lineto\n~p ~p lineto\n~p ~p lineto\nclosepath\nfill\n",
[R,G,B,X1,H-Y1,X2,H-Y1,X2,H-Y2,X1,H-Y2,X1,H-Y1]);
eps_object(_,_) -> "".
s(Format, Terms) -> lists:flatten(io_lib:format(Format, Terms)).
eps_header(W,H) ->
s("%!PS-Adobe-3.0 EPSF-3.0\n%%Creator: Created by egd\n%%BoundingBox: 0 0 ~p ~p\n%%LanguageLevel: 2\n%%Pages: 1\n%%DocumentData: Clean7Bit\n",[W,H]) ++
"%%BeginProlog\n/ellipse {7 dict begin\n/endangle exch def\n/startangle exch def\n/yradius exch def\n/xradius exch def\n/yC exch def\n/xC exch def\n"
"/savematrix matrix currentmatrix def\nxC yC translate\nxradius yradius scale\n0 0 1 startangle endangle arc\nsavematrix setmatrix\nend\n} def\n"
"%%EndProlog\n".
eps_footer() ->
"%%EOF\n".
