<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
<year>1996</year><year>2013</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
</legalnotice>
<title>snmp</title>
<prepared></prepared>
<responsible></responsible>
<docno></docno>
<approved></approved>
<checked></checked>
<date></date>
<rev></rev>
<file>snmp.xml</file>
</header>
<module>snmp</module>
<modulesummary>Interface functions to the SNMP toolkit</modulesummary>
<description>
<p>The module <c>snmp</c> contains interface functions to the
SNMP toolkit.</p>
</description>
<section>
<title>Common Data Types</title>
<p>The following data-types are used in the functions below: </p>
<list type="bulleted">
<item>
<p><c>datetime() = {date(), time()}</c></p>
<p>See <seealso marker="stdlib:calendar">calendar</seealso>
for more info.</p>
</item>
</list>
<marker id="config"></marker>
</section>
<funcs>
<func>
<name>config() -> ok | {error, Reason}</name>
<fsummary>Configure with a simple interactive tool</fsummary>
<desc>
<p>A simple interactive configuration tool. Simple
configuration files can be generated, but more complex
configurations still have to be edited manually.
</p>
<p>The tool is a textual based tool that asks some questions
and generates <c>sys.config</c> and <c>*.conf</c> files.
</p>
<p><em>Note</em> that if the application shall support version 3,
then the crypto app must be started before running this function
(password generation).</p>
<p><em>Note</em> also that some of the configuration files for the
agent and manager share the same names. This means that
they have to be stored in <em>different</em> directories!</p>
<marker id="start"></marker>
</desc>
</func>
<func>
<name>start() -> ok | {error, Reason}</name>
<name>start(Type) -> ok | {error, Reason}</name>
<fsummary>Start the SNMP application</fsummary>
<type>
<v>Type = start_type()</v>
</type>
<desc>
<p>Starts the SNMP application.</p>
<p>See <seealso marker="kernel:application">application</seealso> for more info.</p>
<marker id="start_agent"></marker>
</desc>
</func>
<func>
<name>start_agent() -> ok | {error, Reason}</name>
<name>start_agent(Type) -> ok | {error, Reason}</name>
<fsummary>Start the agent part of the SNMP application</fsummary>
<type>
<v>Type = start_type()</v>
</type>
<desc>
<p>The SNMP application consists of several entities, of which the
agent is one. This function starts the agent entity of the
application.
</p>
<p>Note that the only way to actually start the agent in this way is
to add the agent related config after starting the application (e.g
it cannot be part of the normal application config; sys.config).
This is done by calling:
<c>application:set_env(snmp, agent, Conf)</c>.
</p>
<p>The default value for <c>Type</c> is <c>normal</c>.</p>
<marker id="start_manager"></marker>
</desc>
</func>
<func>
<name>start_manager() -> ok | {error, Reason}</name>
<name>start_manager(Type) -> ok | {error, Reason}</name>
<fsummary>Start the manager part of the SNMP application</fsummary>
<type>
<v>Type = start_type()</v>
</type>
<desc>
<p>The SNMP application consists of several entities, of which the
manager is one. This function starts the manager entity of the
application.
</p>
<p>Note that the only way to actually start the manager in this way is
to add the manager related config after starting the application (e.g
it cannot be part of the normal application config; sys.config).
This is done by calling:
<c>application:set_env(snmp, manager, Conf)</c>.
</p>
<p>The default value for <c>Type</c> is <c>normal</c>.</p>
<marker id="dat"></marker>
</desc>
</func>
<func>
<name>date_and_time() -> DateAndTime</name>
<fsummary>Return the current date and time as an OCTET STRING</fsummary>
<type>
<v>DateAndTime = [int()]</v>
</type>
<desc>
<p>Returns current date and time as the data type DateAndTime,
as specified in RFC1903. This is an OCTET STRING.</p>
<marker id="dat2ut_dst"></marker>
</desc>
</func>
<func>
<name>date_and_time_to_universal_time_dst(DateAndTime) -> [utc()]</name>
<fsummary>Convert a DateAndTime value to a list of possible utc()</fsummary>
<type>
<v>DateAndTime = [int()]</v>
<v>utc() = {{Y,Mo,D},{H,M,S}}</v>
</type>
<desc>
<p>Converts a DateAndTime list to a list of possible universal
time(s). The universal time value on the same format as defined in
calendar(3). </p>
<marker id="dat2s"></marker>
</desc>
</func>
<func>
<name>date_and_time_to_string(DateAndTime) -> string()</name>
<name>date_and_time_to_string(DateAndTime, Validate) -> string()</name>
<fsummary>Convert a DateAndTime value to a string</fsummary>
<type>
<v>DateAndTime = [int()]</v>
<v>Validate = fun(Kind, Data) -> boolean()</v>
</type>
<desc>
<p>Converts a DateAndTime list to a printable string, according
to the DISPLAY-HINT definition in RFC2579.</p>
<p>The validation fun, <c>Validate</c>, allows for a more "flexible"
validation of the <c>DateAndTime</c> argument. Whenever the data
is found to not follow RFC2579, the fun is called to allow a more
"lax" validation.
See the <seealso marker="#vdat">validate_date_and_time/2</seealso>
function for more info on the <c>Validate</c> fun. </p>
<marker id="dat2s2"></marker>
</desc>
</func>
<func>
<name>date_and_time_to_string2(DateAndTime) -> string()</name>
<fsummary>Convert a DateAndTime value to a string</fsummary>
<type>
<v>DateAndTime = [int()]</v>
</type>
<desc>
<p>Converts a DateAndTime list to a printable string, according
to the DISPLAY-HINT definition in RFC2579, with the extension
that it also allows the values "hours from UTC" = 14 together with
"minutes from UTC" = 0. </p>
<marker id="lt2dat_dst"></marker>
</desc>
</func>
<func>
<name>local_time_to_date_and_time_dst(Local) -> [DateAndTime]</name>
<fsummary>Convert a Local time value to a list of possible DateAndTime(s)</fsummary>
<type>
<v>Local = {{Y,Mo,D},{H,M,S}}</v>
<v>DateAndTime = [int()]</v>
</type>
<desc>
<p>Converts a local time value to a list of possible DateAndTime
list(s). The local time value on the same format as defined in
calendar(3).</p>
<marker id="ut2dat"></marker>
</desc>
</func>
<func>
<name>universal_time_to_date_and_time(UTC) -> DateAndTime</name>
<fsummary>Convert a UTC value to DateAndTime</fsummary>
<type>
<v>UTC = {{Y,Mo,D},{H,M,S}}</v>
<v>DateAndTime = [int()]</v>
</type>
<desc>
<p>Converts a universal time value to a DateAndTime list. The
universal time value on the same format as defined in calendar(3).</p>
<marker id="vdat"></marker>
</desc>
</func>
<func>
<name>validate_date_and_time(DateAndTime) -> bool()</name>
<name>validate_date_and_time(DateAndTime, Validate) -> bool()</name>
<fsummary>Check if a DateAndTime value is correct</fsummary>
<type>
<v>DateAndTime = term()</v>
<v>Validate = fun(Kind, Data) -> boolean()</v>
</type>
<desc>
<p>Checks if <c>DateAndTime</c> is a correct DateAndTime
value, as specified in RFC2579. This function can be used in
instrumentation functions to validate a DateAndTime value.</p>
<p>The validation fun, <c>Validate</c>, allows for a more "flexible"
validation of the <c>DateAndTime</c> argument. Whenever the data
is found to not follow RFC2579, the fun is called to allow a more
"lax" validation.
The input to the validation fun looks like this: </p>
<pre>
Kind Data
-------------- ----------------------
year {Year1, Year2}
month Month
day Day
hour Hour
minute Minute
seconds Seconds
deci_seconds DeciSeconds
diff [Sign, Hour, Minute]
valid_date {Year, Month, Day}
</pre>
<marker id="passwd2localized_key"></marker>
</desc>
</func>
<func>
<name>passwd2localized_key(Alg, Passwd, EngineID) -> Key</name>
<fsummary>Generates an localized key</fsummary>
<type>
<v>Alg = algorithm()</v>
<v>algorithm() = md5 | sha</v>
<v>Passwd = string()</v>
<v>EngineID = string()</v>
<v>Key = list()</v>
</type>
<desc>
<p>Generates a key that can be used as an authentication
or privacy key using MD5 och SHA. The key is
localized for EngineID.</p>
<marker id="octet_string_to_bits"></marker>
</desc>
</func>
<func>
<name>octet_string_to_bits(S) -> Val</name>
<fsummary>Convert an OCTET-STRING to BITS</fsummary>
<type>
<v>Val = bits()</v>
</type>
<desc>
<p>Utility function for converting a value of type
<c>OCTET-STRING</c> to <c>BITS</c>. </p>
<marker id="bits_to_octet_string"></marker>
</desc>
</func>
<func>
<name>bits_to_octet_string(B) -> Val</name>
<fsummary>Convert an OCTET-STRING to BITS</fsummary>
<type>
<v>Val = octet_string()</v>
</type>
<desc>
<p>Utility function for converting a value of type <c>BITS</c>
to <c>OCTET-STRING</c>. </p>
<marker id="read_mib"></marker>
</desc>
</func>
<func>
<name>read_mib(FileName) -> {ok, mib()} | {error, Reason}</name>
<fsummary></fsummary>
<type>
<v>FileName = string()</v>
<v>mib() = #mib{}</v>
<v>Reason = term()</v>
</type>
<desc>
<p>Read a compiled mib.</p>
<marker id="log_to_txt"></marker>
</desc>
</func>
<func>
<name>log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile) -> ok | {error, Reason}</name>
<name>log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Block | Start) -> ok | {error, Reason}</name>
<name>log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Block | Stop) -> ok | {error, Reason}</name>
<name>log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop, Block) -> ok | {error, Reason}</name>
<fsummary>Convert an Audit Trail Log to text format</fsummary>
<type>
<v>LogDir = string()</v>
<v>Mibs = [MibName]</v>
<v>OutFile = string()</v>
<v>MibName = string()</v>
<v>LogName = string()</v>
<v>LogFile = string()</v>
<v>Start = Stop = null | datetime() | {local_time,datetime()} | {universal_time,datetime()} </v>
<v>Block = boolean()</v>
<v>Reason = term()</v>
</type>
<desc>
<p>Converts an Audit Trail Log to a readable text file, where
each item has a trailing TAB character, and any TAB
character in the body of an item has been replaced by ESC
TAB. </p>
<p>The function can be used on a running system, or by copying
the entire log directory and calling this function. SNMP
must be running in order to provide MIB information. </p>
<p><c>LogDir</c> is the name of the directory where the audit
trail log is stored.
<c>Mibs</c> is a list of Mibs to be used. The function uses
the information in the Mibs to convert for example object
identifiers to their symbolic name.
<c>OutFile</c> is the name of the generated text-file.
<c>LogName</c> is the name of the log,
<c>LogFile</c> is the name of the log file.
<c>Start</c> is the start (first) date and time from which
log events will be converted and
<c>Stop</c> is the stop (last) date and time to which log
events will be converted.
The <c>Block</c> argument indicates if the log should be blocked
during conversion. This could be usefull when converting large
logs (when otherwise the log could wrap during conversion).
Defaults to <c>true</c>.
</p>
<p>The format of an audit trail log text item is as follows: </p>
<p><c>Tag Addr - Community [TimeStamp] Vsn</c><br></br>
<c>PDU</c></p>
<p>where <c>Tag</c> is <c>request</c>, <c>response</c>,
<c>report</c>, <c>trap</c> or <c>inform</c>; Addr is
<c>IP:Port</c> (or comma space separated list of such);
<c>Community</c> is the community parameter (SNMP version
v1 and v2), or <c>SecLevel:"AuthEngineID":"UserName"</c>
(SNMP v3); <c>TimeStamp</c> is a date and time stamp,
and <c>Vsn</c> is the SNMP version. <c>PDU</c> is a textual
version of the protocol data unit. There is a new line
between <c>Vsn</c> and <c>PDU</c>.</p>
<marker id="log_to_io"></marker>
</desc>
</func>
<func>
<name>log_to_io(LogDir, Mibs, LogName, LogFile) -> ok | {error, Reason}</name>
<name>log_to_io(LogDir, Mibs, LogName, LogFile, Block | Start) -> ok | {error, Reason}</name>
<name>log_to_io(LogDir, Mibs, LogName, LogFile, Start, Block | Stop) -> ok | {error, Reason}</name>
<name>log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop, Block) -> ok | {error, Reason}</name>
<fsummary>Convert an Audit Trail Log to text format</fsummary>
<type>
<v>LogDir = string()</v>
<v>Mibs = [MibName]</v>
<v>MibName = string()</v>
<v>LogName = string()</v>
<v>LogFile = string()</v>
<v>Start = Stop = null | datetime() | {local_time,datetime()} | {universal_time,datetime()} </v>
<v>Reason = term()</v>
</type>
<desc>
<p>Converts an Audit Trail Log to a readable format and
prints it on stdio. See
<seealso marker="snmp#log_to_txt">log_to_txt</seealso>
above for more info.</p>
<marker id="change_log_size"></marker>
</desc>
</func>
<func>
<name>change_log_size(LogName, NewSize) -> ok | {error, Reason}</name>
<fsummary>Change the size of the Audit Trail Log</fsummary>
<type>
<v>LogName = string()</v>
<v>NewSize = {MaxBytes, MaxFiles}</v>
<v>MaxBytes = integer()</v>
<v>MaxFiles = integer()</v>
<v>Reason = term()</v>
</type>
<desc>
<p>Changes the log size of the Audit Trail Log. The
application must be configured to use the audit trail log
function. Please refer to disk_log(3) in Kernel Reference
Manual for a description of how to change the log size.
</p>
<p>The change is permanent, as long as the log is not deleted.
That means, the log size is remembered across reboots.</p>
<marker id="print_version_info"></marker>
</desc>
</func>
<func>
<name>print_version_info() -> void()</name>
<name>print_version_info(Prefix) -> void()</name>
<fsummary>Formatted print of result of the versions functions</fsummary>
<type>
<v>Prefix = string() | integer()</v>
</type>
<desc>
<p>Utility function(s) to produce a formatted printout of the versions
info generated by the <c>versions1</c> function</p>
<p>This is the same as doing, e.g.: </p>
<pre>
{ok, V} = snmp:versions1(),
snmp:print_versions(V).
</pre>
<marker id="versions1"></marker>
<marker id="versions2"></marker>
</desc>
</func>
<func>
<name>versions1() -> {ok, Info} | {error, Reason}</name>
<name>versions2() -> {ok, Info} | {error, Reason}</name>
<fsummary>Retrieve various system and application info</fsummary>
<type>
<v>Info = [info()]</v>
<v>info() = term()</v>
<v>Reason = term()</v>
</type>
<desc>
<p>Utility functions used to retrieve some system and
application info.</p>
<p>The difference between the two functions is in how they get
the modules to check. <c>versions1</c> uses the app-file and
<c>versions2</c> uses the function <c>application:get_key</c>.</p>
<marker id="print_versions"></marker>
</desc>
</func>
<func>
<name>print_versions(VersionInfo) -> void()</name>
<name>print_versions(Prefix, VersionInfo) -> void()</name>
<fsummary>Formatted print of result of the versions functions</fsummary>
<type>
<v>VersionInfo = [version_info()]</v>
<v>version_info() = term()</v>
<v>Prefix = string() | integer()</v>
</type>
<desc>
<p>Utility function to produce a formatted printout of the versions
info generated by the <c>versions1</c> and <c>versions2</c>
functions</p>
<p>Example: </p>
<pre>
{ok, V} = snmp:versions1(),
snmp:print_versions(V).
</pre>
<marker id="enable_trace"></marker>
</desc>
</func>
<func>
<name>enable_trace() -> void()</name>
<fsummary>Starts a tracer</fsummary>
<!--
<type>
<v>Prefix = string() | integer()</v>
</type>
-->
<desc>
<p>Starts a dbg tracer that prints trace events to stdout (using
plain io:format after a minor formatting). </p>
<marker id="disable_trace"></marker>
</desc>
</func>
<func>
<name>disable_trace() -> void()</name>
<fsummary>Stop the tracer</fsummary>
<!--
<type>
<v>Prefix = string() | integer()</v>
</type>
-->
<desc>
<p>Stop the tracer. </p>
<marker id="set_trace1"></marker>
</desc>
</func>
<func>
<name>set_trace(Targets) -> void()</name>
<fsummary>Set trace target</fsummary>
<type>
<v>Targets = target() | targets()</v>
<v>target() = module()</v>
<v>module() = atom()</v>
<v>targets() = [target() | {target(), target_options()}]</v>
<v>target_options() = [target_option()]</v>
<v>target_option() = {return_trace, boolean()} | {scope, scope()}</v>
<v>scope() = all_functions | exported_functions | function_name() | {function_name(), function_arity()}</v>
<v>function_name() = atom()</v>
<v>function_arity() = integer() >= 0</v>
</type>
<desc>
<p>This function is used to set up default trace on function(s)
for the given module or modules. The scope of the trace will be
all <em>exported</em> functions (both the call info and the return
value). Timestamp info will also be included. </p>
<marker id="reset_trace"></marker>
</desc>
</func>
<func>
<name>reset_trace(Targets) -> void()</name>
<fsummary>Reset trace target</fsummary>
<type>
<v>Targets = module() | modules()</v>
<v>modules() = [module()]</v>
<v>module() = atom()</v>
</type>
<desc>
<p>This function is used to reset (disable) trace for the
given module(s). </p>
<marker id="set_trace2"></marker>
</desc>
</func>
<func>
<name>set_trace(Targets, Opts) -> void()</name>
<fsummary>Set trace target</fsummary>
<type>
<v>Targets = target() | targets()</v>
<v>target() = module()</v>
<v>module() = atom()</v>
<v>targets() = [target() | {target(), target_options()}]</v>
<v>target_options() = [target_option()]</v>
<v>target_option() = {return_trace, boolean()} | {scope, scope()}</v>
<v>scope() = all_functions | exported_functions | function_name() | {function_name(), function_arity()}</v>
<v>function_name() = atom()</v>
<v>function_arity() = integer() >= 0</v>
<v>Opts = disable | trace_options()</v>
<v>trace_options() = [trace_option()]</v>
<v>trace_option() = {timestamp, boolean()} | target_option()</v>
</type>
<desc>
<p>This function is used to set up trace on function(s) for the given
module or modules. </p>
<p>The example below sets up trace on the exported functions (default)
of module <c>snmp_generic</c> and all functions of module
<c>snmp_generic_mnesia</c>. With return values (which is default)
and timestamps in both cases (which is also default): </p>
<pre>
snmp:enable_trace(),
snmp:set_trace([snmp_generic,
{snmp_generic_mnesia, [{scope, all_functions}]}]),
.
.
.
snmp:set_trace(snmp_generic, disable),
.
.
.
snmp:disable_trace(),
</pre>
</desc>
</func>
</funcs>
<section>
<title>See Also</title>
<p>calendar(3)
</p>
</section>
</erlref>
