<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">
<chapter>
<header>
<copyright>
<year>2017</year>
<year>2017</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
</legalnotice>
<title>Configuring algorithms in SSH</title>
<prepared></prepared>
<docno></docno>
<approved></approved>
<date></date>
<rev></rev>
<file>configure_algos.xml</file>
</header>
<section>
<marker id="introduction"/>
<title>Introduction</title>
<p>To fully understand how to configure the algorithms, it is essential to have a basic understanding of the SSH protocol
and how OTP SSH app handles the corresponding items</p>
<p>The first subsection will give a short background of the SSH protocol while later sections describes
the implementation and provides some examples</p>
<section>
<title>Basics of the ssh protocol's algorithms handling</title>
<p>SSH uses different sets of algorithms in different phases of a session. Which
algorithms to use is negotiated by the client and the server at the beginning of a session.
See <url href="https://tools.ietf.org/html/rfc4253">RFC 4253</url>,
"The Secure Shell (SSH) Transport Layer Protocol" for details.
</p>
<p>The negotiation is simple: both peers sends their list of supported alghorithms to the other part.
The first algorithm on the client's list that also in on the server's list is selected. So it is the
client's orderering of the list that gives the priority for the algorithms.</p>
<p>There are five lists exchanged in the connection setup. Three of them are also divided in two
directions, to and from the server.</p>
<p>The lists are (named as in the SSH application's options):</p>
<taglist>
<tag><c>kex</c></tag>
<item>
<p>Key exchange.</p>
<p>An algorithm is selected for computing a secret encryption key. Among examples are:
the old nowadays week <c>'diffie-hellman-group-exchange-sha1'</c> and the very strong and modern
<c>'ecdh-sha2-nistp512'</c>.</p>
</item>
<tag><c>public_key</c></tag>
<item>
<p>Server host key</p>
<p>The asymetric encryption algorithm used in the server's private-public host key pair.
Examples include the well-known RSA <c>'ssh-rsa'</c> and elliptic curve <c>'ecdsa-sha2-nistp521'</c>.
</p>
</item>
<tag><c>cipher</c></tag>
<item>
<p>Symetric cipher algorithm used for the payload encryption. This algorithm will use the key calculated
in the kex phase (together with other info) to genereate the actual key used. Examples are
tripple-DES <c>'3des-cbc'</c> and one of many AES variants <c>'aes192-ctr'</c>.
</p>
<p>This list is actually two - one for each direction server-to-client and client-to-server. Therefore it
is possible but rare to have different algorithms in the two directions in one connection.</p>
</item>
<tag><c>mac</c></tag>
<item>
<p>Message authentication code</p>
<p>"Check sum" of each message sent between the peers. Examples are SHA <c>'hmac-sha1'</c> and
SHA2 <c>'hmac-sha2-512'</c>.</p>
<p>This list is also divided into two for the both directions</p>
</item>
<tag><c>compression</c></tag>
<item>
<p>If and how to compress the message. Examples are <c>none</c>, that is, no compression and
<c>zlib</c>.</p>
<p>This list is also divided into two for the both directions</p>
</item>
</taglist>
</section>
<section>
<title>The SSH app's mechanism</title>
<p>The set of algorithms that the SSH app uses by default depends on the algoritms supported by the:</p>
<list>
<item><p><seealso marker="crypto:crypto">crypto</seealso> app,</p>
</item>
<item><p>The cryptolib OTP is linked with, usally the one the OS uses, probably OpenSSL,</p>
</item>
<item><p>and finaly what the SSH app implements</p>
</item>
</list>
<p>Due to this, it impossible to list in documentation what algorithms that are available in a certain installation.</p>
<p>There is an important command to list the actual algorithms and their ordering:
<seealso marker="ssh#default_algorithms-0">ssh:default_algorithms/0</seealso>.</p>
<marker id="example_default_algorithms"/>
<code type="erl">
0> ssh:default_algorithms().
[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521',
'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256',
'diffie-hellman-group16-sha512',
'diffie-hellman-group18-sha512',
'diffie-hellman-group14-sha256',
'diffie-hellman-group14-sha1',
'diffie-hellman-group-exchange-sha1']},
{public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521',
'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256',
'rsa-sha2-512','ssh-dss']},
{cipher,[{client2server,['[email protected]',
'aes256-ctr','aes192-ctr','[email protected]',
'aes128-ctr','aes128-cbc','3des-cbc']},
{server2client,['[email protected]','aes256-ctr',
'aes192-ctr','[email protected]','aes128-ctr',
'aes128-cbc','3des-cbc']}]},
{mac,[{client2server,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']},
{server2client,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']}]},
{compression,[{client2server,[none,'[email protected]',zlib]},
{server2client,[none,'[email protected]',zlib]}]}]
</code>
<p>To change the algorithm list, there are two options which can be used in
<seealso marker="ssh#connect-3">ssh:connect/2,3,4</seealso>
and
<seealso marker="ssh#daemon-2">ssh:daemon/2,3</seealso>. The options could of course
be used in all other functions that initiates connections.</p>
<p>The options are <c>preferred_algorithms</c> and <c>modify_algorithms</c>. The first one
replaces the default set, while the latter modifies the default set.</p>
</section>
</section>
<section>
<title>Replacing the default set: preferred_algorithms</title>
<p>See the <seealso marker="ssh#type-preferred_algorithms_common_option">Reference Manual</seealso> for details</p>
<p>Here follows a series of examples ranging from simple to more complex.</p>
<p>To forsee the effect of an option there is an experimental function <c>ssh:chk_algos_opts(Opts)</c>.
It mangles the options <c>preferred_algorithms</c>
and <c>modify_algorithms</c> in the same way as <c>ssh:dameon</c>, <c>ssh:connect</c> and their friends does.</p>
<section>
<title>Example 1</title>
<p>Replace the kex algorithms list with the single algorithm <c>'diffie-hellman-group14-sha256'</c>:</p>
<code>
1> ssh:chk_algos_opts(
[{preferred_algorithms,
[{kex, ['diffie-hellman-group14-sha256']}
]
}
]).
[{kex,['diffie-hellman-group14-sha256']},
{public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521',
'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256',
'rsa-sha2-512','ssh-dss']},
{cipher,[{client2server,['[email protected]',
'aes256-ctr','aes192-ctr','[email protected]',
'aes128-ctr','aes128-cbc','3des-cbc']},
{server2client,['[email protected]','aes256-ctr',
'aes192-ctr','[email protected]','aes128-ctr',
'aes128-cbc','3des-cbc']}]},
{mac,[{client2server,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']},
{server2client,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']}]},
{compression,[{client2server,[none,'[email protected]',zlib]},
{server2client,[none,'[email protected]',zlib]}]}]
</code>
<p>Note that the unmentioned lists (<c>public_key</c>, <c>cipher</c>, <c>mac</c> and <c>compression</c>)
are un-changed.</p>
</section>
<section>
<title>Example 2</title>
<p>In the lists that are divided in two for the two directions (c.f <c>cipher</c>) it is possible
to change both directions at once:</p>
<code>
2> ssh:chk_algos_opts(
[{preferred_algorithms,
[{cipher,['aes128-ctr']}
]
}
]).
[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521',
'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256',
'diffie-hellman-group16-sha512',
'diffie-hellman-group18-sha512',
'diffie-hellman-group14-sha256',
'diffie-hellman-group14-sha1',
'diffie-hellman-group-exchange-sha1']},
{public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521',
'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256',
'rsa-sha2-512','ssh-dss']},
{cipher,[{client2server,['aes128-ctr']},
{server2client,['aes128-ctr']}]},
{mac,[{client2server,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']},
{server2client,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']}]},
{compression,[{client2server,[none,'[email protected]',zlib]},
{server2client,[none,'[email protected]',zlib]}]}]
</code>
<p>Note that both lists in <c>cipher</c> has been changed to the provided value (<c>'aes128-ctr'</c>).</p>
</section>
<section>
<title>Example 3</title>
<p>In the lists that are divided in two for the two directions (c.f <c>cipher</c>) it is possible
to change only one of the directions:</p>
<code>
3> ssh:chk_algos_opts(
[{preferred_algorithms,
[{cipher,[{client2server,['aes128-ctr']}]}
]
}
]).
[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521',
'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256',
'diffie-hellman-group16-sha512',
'diffie-hellman-group18-sha512',
'diffie-hellman-group14-sha256',
'diffie-hellman-group14-sha1',
'diffie-hellman-group-exchange-sha1']},
{public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521',
'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256',
'rsa-sha2-512','ssh-dss']},
{cipher,[{client2server,['aes128-ctr']},
{server2client,['[email protected]','aes256-ctr',
'aes192-ctr','[email protected]','aes128-ctr',
'aes128-cbc','3des-cbc']}]},
{mac,[{client2server,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']},
{server2client,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']}]},
{compression,[{client2server,[none,'[email protected]',zlib]},
{server2client,[none,'[email protected]',zlib]}]}]
</code>
</section>
<section>
<title>Example 4</title>
<p>It is of course possible to change more than one list:</p>
<code>
4> ssh:chk_algos_opts(
[{preferred_algorithms,
[{cipher,['aes128-ctr']},
{mac,['hmac-sha2-256']},
{kex,['ecdh-sha2-nistp384']},
{public_key,['ssh-rsa']},
{compression,[{server2client,[none]},
{client2server,[zlib]}]}
]
}
]).
[{kex,['ecdh-sha2-nistp384']},
{public_key,['ssh-rsa']},
{cipher,[{client2server,['aes128-ctr']},
{server2client,['aes128-ctr']}]},
{mac,[{client2server,['hmac-sha2-256']},
{server2client,['hmac-sha2-256']}]},
{compression,[{client2server,[zlib]},
{server2client,[none]}]}]
</code>
<p>Note that the ordering of the tuples in the lists didn't matter.</p>
</section>
</section>
<section>
<title>Modifying the default set: modify_algorithms</title>
<p>A situation where it might be useful to add an algorithm is when one need to use a supported but disabled one.
An example is the <c>'diffie-hellman-group1-sha1'</c> which nowadays is very unsecure and therefore disabled. It is
however still supported and might be used.</p>
<p>The option <c>preferred_algorithms</c> may be complicated to use for adding or removing single algorithms.
First one has to list them with <c>ssh:default_algorithms()</c> and then do changes in the lists.</p>
<p>To facilitate addition or removal of algorithms the option <c>modify_algorithms</c> is available.
See the <seealso marker="ssh#type-modify_algorithms_common_option">Reference Manual</seealso> for details.</p>
<p>The option takes a list with instructions to append, prepend or remove algorithms:</p>
<code type="erl">
{modify_algorithms, [{append, ...},
{prepend, ...},
{rm, ...}
]}
</code>
<p>Each of the <c>...</c> can be a <c>algs_list()</c> as the argument to the <c>preferred_algorithms</c> option.</p>
<section>
<title>Example 5</title>
<p>As an example let's add the Diffie-Hellman Group1 first in the kex list. It is supported according to
<seealso marker="SSH_app#supported_algos">Supported algoritms</seealso>.</p>
<code type="erl">
5> ssh:chk_algos_opts(
[{modify_algorithms,
[{prepend,
[{kex,['diffie-hellman-group1-sha1']}]
}
]
}
]).
[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384',
'ecdh-sha2-nistp521','ecdh-sha2-nistp256',
'diffie-hellman-group-exchange-sha256',
'diffie-hellman-group16-sha512',
'diffie-hellman-group18-sha512',
'diffie-hellman-group14-sha256',
'diffie-hellman-group14-sha1',
'diffie-hellman-group-exchange-sha1']},
{public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521',
'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256',
'rsa-sha2-512','ssh-dss']},
{cipher,[{client2server,['[email protected]',
'aes256-ctr','aes192-ctr','[email protected]',
'aes128-ctr','aes128-cbc','3des-cbc']},
{server2client,['[email protected]','aes256-ctr',
'aes192-ctr','[email protected]','aes128-ctr',
'aes128-cbc','3des-cbc']}]},
{mac,[{client2server,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']},
{server2client,['hmac-sha2-256','hmac-sha2-512',
'hmac-sha1']}]},
{compression,[{client2server,[none,'[email protected]',zlib]},
{server2client,[none,'[email protected]',zlib]}]}]
</code>
<p>And the result shows that the Diffie-Hellman Group1 is added at the head of the kex list</p>
</section>
<section>
<title>Example 6</title>
<p>In this example, we in put the 'diffie-hellman-group1-sha1' first and also move the
<c>'ecdh-sha2-nistp521'</c> to the end in the kex list, that is, <c>append</c> it.</p>
<code type="erl">
6> ssh:chk_algos_opts(
[{modify_algorithms,
[{prepend,
[{kex, ['diffie-hellman-group1-sha1']}
]},
{append,
[{kex, ['ecdh-sha2-nistp521']}
]}
]
}
]).
[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384',
'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256',
'diffie-hellman-group16-sha512',
'diffie-hellman-group18-sha512',
'diffie-hellman-group14-sha256',
'diffie-hellman-group14-sha1',
'diffie-hellman-group-exchange-sha1','ecdh-sha2-nistp521']},
{public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521',
.....
]
</code>
<p>Note that the appended algorithm is removed from its original place and then appended to the same list.</p>
</section>
<section>
<title>Example 7</title>
<p>In this example, we use both options (<c>preferred_algorithms</c> and <c>modify_algorithms</c>) and
also try to prepend an unsupported algorithm. Any unsupported algorithm is quietly removed.</p>
<code type="erl">
7> ssh:chk_algos_opts(
[{preferred_algorithms,
[{cipher,['aes128-ctr']},
{mac,['hmac-sha2-256']},
{kex,['ecdh-sha2-nistp384']},
{public_key,['ssh-rsa']},
{compression,[{server2client,[none]},
{client2server,[zlib]}]}
]
},
{modify_algorithms,
[{prepend,
[{kex, ['some unsupported algorithm']}
]},
{append,
[{kex, ['diffie-hellman-group1-sha1']}
]}
]
}
]).
[{kex,['ecdh-sha2-nistp384','diffie-hellman-group1-sha1']},
{public_key,['ssh-rsa']},
{cipher,[{client2server,['aes128-ctr']},
{server2client,['aes128-ctr']}]},
{mac,[{client2server,['hmac-sha2-256']},
{server2client,['hmac-sha2-256']}]},
{compression,[{client2server,[zlib]},
{server2client,[none]}]}]
</code>
<p>It is of course questionable why anyone would like to use the both these options together,
but it is possible if an unforeseen need should arise.</p>
</section>
</section>
</chapter>
