<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
<year>2008</year>
<year>2011</year>
<holder>Ericsson AB, All Rights Reserved</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
The Initial Developer of the Original Code is Ericsson AB.
</legalnotice>
<title>ssh_connection</title>
<prepared>Ingela Anderton Andin</prepared>
<responsible></responsible>
<docno></docno>
<approved></approved>
<checked></checked>
<date></date>
<rev></rev>
</header>
<module>ssh_connection</module>
<modulesummary>This module provides an API to the ssh connection protocol.
</modulesummary>
<description>
<p>This module provides an API to the ssh connection protocol.
Not all features of the connection protocol are officially supported yet.
Only the ones supported are documented here.</p>
</description>
<section>
<title>COMMON DATA TYPES </title>
<p>Type definitions that are used more than once in this module and/or
abstractions to indicate the intended use of the data type:</p>
<p><c>boolean() = true | false </c></p>
<p><c>string() = list of ASCII characters</c></p>
<p><c>timeout() = infinity | integer() - in milliseconds.</c></p>
<p><c>ssh_connection_ref() - opaque to the user returned by
ssh:connect/3 or sent to a ssh channel processes</c></p>
<p><c>ssh_channel_id() = integer() </c></p>
<p><c>ssh_data_type_code() = 1 ("stderr") | 0 ("normal") are
currently valid values see RFC 4254 section 5.2.</c></p>
<p><c>ssh_request_status() = success | failure</c></p>
</section>
<section>
<title>MESSAGES SENT TO CHANNEL PROCESSES</title>
<p>As a result of the ssh connection protocol messages on the form
<c><![CDATA[{ssh_cm, ssh_connection_ref(), term()}]]></c>
will be sent to a channel process. The term will contain
information regarding the ssh connection protocol event,
for details see the ssh channel behavior callback <seealso
marker="ssh_channel">handle_ssh_msg/2 </seealso> </p>
</section>
<funcs>
<func>
<name>adjust_window(ConnectionRef, ChannelId, NumOfBytes) -> ok</name>
<fsummary>Adjusts the ssh flowcontrol window. </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id() </v>
<v> NumOfBytes = integer()</v>
</type>
<desc>
<p>Adjusts the ssh flowcontrol window. </p>
<note><p>This will be taken care of by the ssh_channel
behavior when the callback <seealso marker="ssh_channel">
handle_ssh_msg/2 </seealso> has returned after processing a
{ssh_cm, ssh_connection_ref(), {data, ssh_channel_id(),
ssh_data_type_code(), binary()}}
message, and should normally not be called explicitly.</p></note>
</desc>
</func>
<func>
<name>close(ConnectionRef, ChannelId) -> ok</name>
<fsummary>Sends a close message on the channel <c>ChannelId</c>. </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
</type>
<desc>
<p>Sends a close message on the channel <c>ChannelId</c>
</p>
<note><p>This function will be called by the ssh channel
behavior when the channel is terminated see <seealso
marker="ssh_channel"> ssh_channel(3) </seealso> and should
normally not be called explicitly.</p></note>
</desc>
</func>
<func>
<name>exec(ConnectionRef, ChannelId, Command, TimeOut) -> ssh_request_status() </name>
<fsummary>Will request that the server start the
execution of the given command. </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
<v> Command = string()</v>
<v>Timeout = timeout() </v>
</type>
<desc>
<p>Will request that the server start the execution of the
given command, the result will be received as:</p>
<taglist>
<tag><c> N X {ssh_cm,
ssh_connection_ref(), {data, ssh_channel_id(), ssh_data_type_code(),
binary() = Data}} </c></tag>
<item>The result of executing the command may be only one line
or thousands of lines depending on the command.</item>
<tag><c> 1 X {ssh_cm, ssh_connection_ref(), {eof, ssh_channel_id()}}</c></tag>
<item>Indicates that no more data will be sent.</item>
<tag><c>0 or 1 X {ssh_cm,
ssh_connection_ref(), {exit_signal,
ssh_channel_id(), string() = ExitSignal, string() = ErrorMsg, string() = LanguageString}}</c></tag>
<item>Not all systems send signals. For details on valid string
values see RFC 4254 section 6.10 </item>
<tag><c>0 or 1 X {ssh_cm, ssh_connection_ref(), {exit_status,
ssh_channel_id(), integer() = ExitStatus}}</c></tag>
<item>It is recommended by the <c>ssh connection protocol</c> that this
message shall be sent, but that may not always be the case.</item>
<tag><c> 1 X {ssh_cm, ssh_connection_ref(),
{closed, ssh_channel_id()}}</c></tag>
<item>Indicates that the ssh channel started for the
execution of the command has now been shutdown.</item>
</taglist>
<p> These message should be handled by the
client. The <seealso marker="ssh_channel">ssh channel
behavior</seealso> can be used when writing a client.
</p>
</desc>
</func>
<func>
<name>exit_status(ConnectionRef, ChannelId, Status) -> ok</name>
<fsummary>Sends the exit status of a command to the client.</fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
<v> Status = integer()</v>
</type>
<desc>
<p>Sends the exit status of a command to the client.</p>
</desc>
</func>
<func>
<name>reply_request(ConnectionRef, WantReply, Status, CannelId) -> ok</name>
<fsummary>Send status replies to requests that want such replies. </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> WantReply = boolean()</v>
<v> Status = ssh_request_status() </v>
<v> ChannelId = ssh_channel_id()</v>
</type>
<desc>
<p>Sends status replies to requests where the requester has
stated that they want a status report e.i .<c> WantReply = true</c>,
if <c> WantReply</c> is false calling this function will be a
"noop". Should be called after handling an ssh connection
protocol message containing a <c>WantReply</c> boolean
value. See the ssh_channel behavior callback <seealso
marker="ssh_channel"> handle_ssh_msg/2 </seealso>
</p>
</desc>
</func>
<func>
<name>send(ConnectionRef, ChannelId, Data) -></name>
<name>send(ConnectionRef, ChannelId, Data, Timeout) -></name>
<name>send(ConnectionRef, ChannelId, Type, Data) -></name>
<name>send(ConnectionRef, ChannelId, Type, Data, TimeOut) ->
ok | {error, timeout} | {error, closed}</name>
<fsummary>Sends channel data </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
<v> Data = binary()</v>
<v> Type = ssh_data_type_code()</v>
<v> Timeout = timeout()</v>
</type>
<desc>
<p>Sends channel data.
</p>
</desc>
</func>
<func>
<name>send_eof(ConnectionRef, ChannelId) -> ok | {error, closed}</name>
<fsummary>Sends eof on the channel <c>ChannelId</c>. </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
</type>
<desc>
<p>Sends eof on the channel <c>ChannelId</c>.
</p>
</desc>
</func>
<func>
<name>session_channel(ConnectionRef, Timeout) -> </name>
<name>session_channel(ConnectionRef, InitialWindowSize,
MaxPacketSize, Timeout) -> {ok, ssh_channel_id()} | {error, Reason}</name>
<fsummary>Opens a channel for a ssh session. A session is a
remote execution of a program. The program may be a shell, an
application, a system command, or some built-in subsystem. </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref()</v>
<v> InitialWindowSize = integer() </v>
<v> MaxPacketSize = integer() </v>
<v> Timeout = timeout()</v>
<v> Reason = term() </v>
</type>
<desc>
<p>Opens a channel for a ssh session. A session is a
remote execution of a program. The program may be a shell, an
application, a system command, or some built-in subsystem.
</p>
</desc>
</func>
<func>
<name>setenv(ConnectionRef, ChannelId, Var, Value, TimeOut) -> ssh_request_status()</name>
<fsummary> Environment variables may be passed to the
shell/command to be started later.</fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
<v> Var = string()</v>
<v> Value = string()</v>
<v> Timeout = timeout()</v>
</type>
<desc>
<p> Environment variables may be passed to the shell/command to be
started later.
</p>
</desc>
</func>
<func>
<name>shell(ConnectionRef, ChannelId) -> ssh_request_status()
</name>
<fsummary> Will request that the user's default shell (typically
defined in /etc/passwd in UNIX systems) be started at the other
end. </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
</type>
<desc>
<p> Will request that the user's default shell (typically
defined in /etc/passwd in UNIX systems) be started at the
other end.
</p>
</desc>
</func>
<func>
<name>subsystem(ConnectionRef, ChannelId, Subsystem, Timeout) -> ssh_request_status()</name>
<fsummary> </fsummary>
<type>
<v> ConnectionRef = ssh_connection_ref() </v>
<v> ChannelId = ssh_channel_id()</v>
<v> Subsystem = string()</v>
<v> Timeout = timeout()</v>
</type>
<desc>
<p> Sends a request to execute a predefined subsystem.
</p>
</desc>
</func>
</funcs>
</erlref>
