%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2008-2017. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%%
-module(ssh_basic_SUITE).
-include_lib("common_test/include/ct.hrl").
-include_lib("kernel/include/inet.hrl").
-include_lib("kernel/include/file.hrl").
-include("ssh_test_lib.hrl").
%% Note: This directive should only be used in test suites.
%%-compile(export_all).
%%% Test cases
-export([
app_test/1,
appup_test/1,
cli/1,
close/1,
daemon_already_started/1,
daemon_opt_fd/1,
multi_daemon_opt_fd/1,
double_close/1,
exec/1,
exec_compressed/1,
exec_key_differs1/1,
exec_key_differs2/1,
exec_key_differs3/1,
exec_key_differs_fail/1,
fail_daemon_start/1,
idle_time_client/1,
idle_time_server/1,
inet6_option/1,
inet_option/1,
internal_error/1,
known_hosts/1,
login_bad_pwd_no_retry1/1,
login_bad_pwd_no_retry2/1,
login_bad_pwd_no_retry3/1,
login_bad_pwd_no_retry4/1,
login_bad_pwd_no_retry5/1,
misc_ssh_options/1,
openssh_zlib_basic_test/1,
packet_size_zero/1,
pass_phrase/1,
peername_sockname/1,
send/1,
shell/1,
shell_no_unicode/1,
shell_unicode_string/1,
ssh_info_print/1,
key_callback/1,
key_callback_options/1,
shell_exit_status/1
]).
%%% Common test callbacks
-export([suite/0, all/0, groups/0,
init_per_suite/1, end_per_suite/1,
init_per_group/2, end_per_group/2,
init_per_testcase/2, end_per_testcase/2
]).
-define(NEWLINE, <<"\r\n">>).
%%--------------------------------------------------------------------
%% Common Test interface functions -----------------------------------
%%--------------------------------------------------------------------
suite() ->
[{ct_hooks,[ts_install_cth]},
{timetrap,{seconds,40}}].
all() ->
[app_test,
appup_test,
{group, dsa_key},
{group, rsa_key},
{group, ecdsa_sha2_nistp256_key},
{group, ecdsa_sha2_nistp384_key},
{group, ecdsa_sha2_nistp521_key},
{group, dsa_pass_key},
{group, rsa_pass_key},
{group, ecdsa_sha2_nistp256_pass_key},
{group, ecdsa_sha2_nistp384_pass_key},
{group, ecdsa_sha2_nistp521_pass_key},
{group, host_user_key_differs},
{group, key_cb},
{group, internal_error},
{group, rsa_host_key_is_actualy_ecdsa},
daemon_already_started,
double_close,
daemon_opt_fd,
multi_daemon_opt_fd,
packet_size_zero,
ssh_info_print,
{group, login_bad_pwd_no_retry},
shell_exit_status
].
groups() ->
[{dsa_key, [], basic_tests()},
{rsa_key, [], basic_tests()},
{ecdsa_sha2_nistp256_key, [], basic_tests()},
{ecdsa_sha2_nistp384_key, [], basic_tests()},
{ecdsa_sha2_nistp521_key, [], basic_tests()},
{rsa_host_key_is_actualy_ecdsa, [], [fail_daemon_start]},
{host_user_key_differs, [], [exec_key_differs1,
exec_key_differs2,
exec_key_differs3,
exec_key_differs_fail]},
{dsa_pass_key, [], [pass_phrase]},
{rsa_pass_key, [], [pass_phrase]},
{ecdsa_sha2_nistp256_pass_key, [], [pass_phrase]},
{ecdsa_sha2_nistp384_pass_key, [], [pass_phrase]},
{ecdsa_sha2_nistp521_pass_key, [], [pass_phrase]},
{key_cb, [], [key_callback, key_callback_options]},
{internal_error, [], [internal_error]},
{login_bad_pwd_no_retry, [], [login_bad_pwd_no_retry1,
login_bad_pwd_no_retry2,
login_bad_pwd_no_retry3,
login_bad_pwd_no_retry4,
login_bad_pwd_no_retry5
]}
].
basic_tests() ->
[send, close, peername_sockname,
exec, exec_compressed,
shell, shell_no_unicode, shell_unicode_string,
cli, known_hosts,
idle_time_client, idle_time_server, openssh_zlib_basic_test,
misc_ssh_options, inet_option, inet6_option].
%%--------------------------------------------------------------------
init_per_suite(Config) ->
?CHECK_CRYPTO(Config).
end_per_suite(_Config) ->
ssh:stop().
%%--------------------------------------------------------------------
init_per_group(dsa_key, Config) ->
case lists:member('ssh-dss',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_dsa(DataDir, PrivDir),
Config;
false ->
{skip, unsupported_pub_key}
end;
init_per_group(rsa_key, Config) ->
case lists:member('ssh-rsa',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_rsa(DataDir, PrivDir),
Config;
false ->
{skip, unsupported_pub_key}
end;
init_per_group(rsa_host_key_is_actualy_ecdsa, Config) ->
case
lists:member('ssh-rsa',
ssh_transport:default_algorithms(public_key)) and
lists:member('ecdsa-sha2-nistp256',
ssh_transport:default_algorithms(public_key))
of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_ecdsa("256", DataDir, PrivDir),
%% The following sets up bad rsa keys:
begin
UserDir = PrivDir,
System = filename:join(UserDir, "system"),
file:copy(filename:join(DataDir, "id_rsa"), filename:join(UserDir, "id_rsa")),
file:rename(filename:join(System, "ssh_host_ecdsa_key"), filename:join(System, "ssh_host_rsa_key")),
file:rename(filename:join(System, "ssh_host_ecdsa_key.pub"), filename:join(System, "ssh_host_rsa_key.pub")),
ssh_test_lib:setup_rsa_known_host(DataDir, UserDir),
ssh_test_lib:setup_rsa_auth_keys(DataDir, UserDir)
end,
Config;
false ->
{skip, unsupported_pub_key}
end;
init_per_group(ecdsa_sha2_nistp256_key, Config) ->
case lists:member('ecdsa-sha2-nistp256',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_ecdsa("256", DataDir, PrivDir),
Config;
false ->
{skip, unsupported_pub_key}
end;
init_per_group(ecdsa_sha2_nistp384_key, Config) ->
case lists:member('ecdsa-sha2-nistp384',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_ecdsa("384", DataDir, PrivDir),
Config;
false ->
{skip, unsupported_pub_key}
end;
init_per_group(ecdsa_sha2_nistp521_key, Config) ->
case lists:member('ecdsa-sha2-nistp521',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_ecdsa("521", DataDir, PrivDir),
Config;
false ->
{skip, unsupported_pub_key}
end;
init_per_group(rsa_pass_key, Config) ->
case lists:member('ssh-rsa',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_rsa_pass_pharse(DataDir, PrivDir, "Password"),
[{pass_phrase, {rsa_pass_phrase, "Password"}}| Config];
false ->
{skip, unsupported_pub_key}
end;
init_per_group(dsa_pass_key, Config) ->
case lists:member('ssh-dss',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_dsa_pass_pharse(DataDir, PrivDir, "Password"),
[{pass_phrase, {dsa_pass_phrase, "Password"}}| Config];
false ->
{skip, unsupported_pub_key}
end;
init_per_group(ecdsa_sha2_nistp256_pass_key, Config) ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
case lists:member('ecdsa-sha2-nistp256',
ssh_transport:default_algorithms(public_key))
andalso
ssh_test_lib:setup_ecdsa_pass_phrase("256", DataDir, PrivDir, "Password")
of
true ->
[{pass_phrase, {ecdsa_pass_phrase, "Password"}}| Config];
false ->
{skip, unsupported_pub_key}
end;
init_per_group(ecdsa_sha2_nistp384_pass_key, Config) ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
case lists:member('ecdsa-sha2-nistp384',
ssh_transport:default_algorithms(public_key))
andalso
ssh_test_lib:setup_ecdsa_pass_phrase("384", DataDir, PrivDir, "Password")
of
true ->
[{pass_phrase, {ecdsa_pass_phrase, "Password"}}| Config];
false ->
{skip, unsupported_pub_key}
end;
init_per_group(ecdsa_sha2_nistp521_pass_key, Config) ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
case lists:member('ecdsa-sha2-nistp521',
ssh_transport:default_algorithms(public_key))
andalso
ssh_test_lib:setup_ecdsa_pass_phrase("521", DataDir, PrivDir, "Password")
of
true ->
[{pass_phrase, {ecdsa_pass_phrase, "Password"}}| Config];
false ->
{skip, unsupported_pub_key}
end;
init_per_group(host_user_key_differs, Config) ->
Data = proplists:get_value(data_dir, Config),
Sys = filename:join(proplists:get_value(priv_dir, Config), system_rsa),
SysUsr = filename:join(Sys, user),
Usr = filename:join(proplists:get_value(priv_dir, Config), user_ecdsa_256),
file:make_dir(Sys),
file:make_dir(SysUsr),
file:make_dir(Usr),
file:copy(filename:join(Data, "ssh_host_rsa_key"), filename:join(Sys, "ssh_host_rsa_key")),
file:copy(filename:join(Data, "ssh_host_rsa_key.pub"), filename:join(Sys, "ssh_host_rsa_key.pub")),
file:copy(filename:join(Data, "id_ecdsa256"), filename:join(Usr, "id_ecdsa")),
file:copy(filename:join(Data, "id_ecdsa256.pub"), filename:join(Usr, "id_ecdsa.pub")),
ssh_test_lib:setup_ecdsa_auth_keys("256", Data, SysUsr),
ssh_test_lib:setup_rsa_known_host(Sys, Usr),
Config;
init_per_group(key_cb, Config) ->
case lists:member('ssh-rsa',
ssh_transport:default_algorithms(public_key)) of
true ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_rsa(DataDir, PrivDir),
Config;
false ->
{skip, unsupported_pub_key}
end;
init_per_group(internal_error, Config) ->
DataDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:setup_dsa(DataDir, PrivDir),
file:delete(filename:join(PrivDir, "system/ssh_host_dsa_key")),
Config;
init_per_group(dir_options, Config) ->
PrivDir = proplists:get_value(priv_dir, Config),
%% Make unreadable dir:
Dir_unreadable = filename:join(PrivDir, "unread"),
ok = file:make_dir(Dir_unreadable),
{ok,F1} = file:read_file_info(Dir_unreadable),
ok = file:write_file_info(Dir_unreadable,
F1#file_info{mode = F1#file_info.mode band (bnot 8#00444)}),
%% Make readable file:
File_readable = filename:join(PrivDir, "file"),
ok = file:write_file(File_readable, <<>>),
%% Check:
case {file:read_file_info(Dir_unreadable),
file:read_file_info(File_readable)} of
{{ok, Id=#file_info{type=directory, access=Md}},
{ok, If=#file_info{type=regular, access=Mf}}} ->
AccessOK =
case {Md, Mf} of
{read, _} -> false;
{read_write, _} -> false;
{_, read} -> true;
{_, read_write} -> true;
_ -> false
end,
case AccessOK of
true ->
%% Save:
[{unreadable_dir, Dir_unreadable},
{readable_file, File_readable}
| Config];
false ->
ct:log("File#file_info : ~p~n"
"Dir#file_info : ~p",[If,Id]),
{skip, "File or dir mode settings failed"}
end;
NotDirFile ->
ct:log("{Dir,File} -> ~p",[NotDirFile]),
{skip, "File/Dir creation failed"}
end;
init_per_group(_, Config) ->
Config.
end_per_group(dsa_key, Config) ->
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:clean_dsa(PrivDir),
Config;
end_per_group(rsa_key, Config) ->
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:clean_rsa(PrivDir),
Config;
end_per_group(dsa_pass_key, Config) ->
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:clean_dsa(PrivDir),
Config;
end_per_group(rsa_pass_key, Config) ->
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:clean_rsa(PrivDir),
Config;
end_per_group(key_cb, Config) ->
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:clean_rsa(PrivDir),
Config;
end_per_group(internal_error, Config) ->
PrivDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:clean_dsa(PrivDir),
Config;
end_per_group(_, Config) ->
Config.
%%--------------------------------------------------------------------
init_per_testcase(TC, Config) when TC==shell_no_unicode ;
TC==shell_unicode_string ->
PrivDir = proplists:get_value(priv_dir, Config),
UserDir = proplists:get_value(priv_dir, Config),
SysDir = proplists:get_value(data_dir, Config),
ssh:start(),
Sftpd = {_Pid, _Host, Port} =
ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, PrivDir},
{user_passwords, [{"foo", "bar"}]}]),
ct:sleep(500),
IO = ssh_test_lib:start_io_server(),
Shell = ssh_test_lib:start_shell(Port, IO, [{user_dir,UserDir},
{silently_accept_hosts, true},
{user,"foo"},{password,"bar"}]),
ct:log("IO=~p, Shell=~p, self()=~p",[IO,Shell,self()]),
ct:log("file:native_name_encoding() = ~p,~nio:getopts() = ~p",
[file:native_name_encoding(),io:getopts()]),
wait_for_erlang_first_line([{io,IO}, {shell,Shell}, {sftpd, Sftpd} | Config]);
init_per_testcase(inet6_option, Config) ->
case ssh_test_lib:has_inet6_address() of
true ->
init_per_testcase('__default__', Config);
false ->
{skip,"No ipv6 interface address"}
end;
init_per_testcase(_TestCase, Config) ->
ssh:start(),
Config.
end_per_testcase(TestCase, Config) when TestCase == server_password_option;
TestCase == server_userpassword_option ->
UserDir = filename:join(proplists:get_value(priv_dir, Config), nopubkey),
ssh_test_lib:del_dirs(UserDir),
end_per_testcase(Config);
end_per_testcase(TC, Config) when TC==shell_no_unicode ;
TC==shell_unicode_string ->
case proplists:get_value(sftpd, Config) of
{Pid, _, _} ->
catch ssh:stop_daemon(Pid);
_ ->
ok
end,
end_per_testcase(Config);
end_per_testcase(_TestCase, Config) ->
end_per_testcase(Config).
end_per_testcase(_Config) ->
ssh:stop(),
ok.
%%--------------------------------------------------------------------
%% Test Cases --------------------------------------------------------
%%--------------------------------------------------------------------
%%% Application consistency test.
app_test(Config) when is_list(Config) ->
?t:app_test(ssh),
ok.
%%--------------------------------------------------------------------
%%% Appup file consistency test.
appup_test(Config) when is_list(Config) ->
ok = ?t:appup_test(ssh).
%%--------------------------------------------------------------------
%%% Test that we can set some misc options not tested elsewhere
%%% some options not yet present are not decided if we should support or
%%% if they need thier own test case.
misc_ssh_options(Config) when is_list(Config) ->
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
CMiscOpt0 = [{connect_timeout, 1000}, {user_dir, UserDir}],
CMiscOpt1 = [{connect_timeout, infinity}, {user_dir, UserDir}],
SMiscOpt0 = [{user_dir, UserDir}, {system_dir, SystemDir}],
SMiscOpt1 = [{user_dir, UserDir}, {system_dir, SystemDir}],
basic_test([{client_opts, CMiscOpt0}, {server_opts, SMiscOpt0}]),
basic_test([{client_opts, CMiscOpt1}, {server_opts, SMiscOpt1}]).
%%--------------------------------------------------------------------
%%% Test configuring IPv4
inet_option(Config) when is_list(Config) ->
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
ClientOpts = [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}],
ServerOpts = [{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}],
basic_test([{client_opts, [{inet, inet} | ClientOpts]},
{server_opts, [{inet, inet} | ServerOpts]}]).
%%--------------------------------------------------------------------
%%% Test configuring IPv6
inet6_option(Config) when is_list(Config) ->
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
ClientOpts = [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}],
ServerOpts = [{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}],
basic_test([{client_opts, [{inet, inet6} | ClientOpts]},
{server_opts, [{inet, inet6} | ServerOpts]}]).
%%--------------------------------------------------------------------
%%% Test api function ssh_connection:exec
exec(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId0,
"1+1.", infinity),
Data0 = {ssh_cm, ConnectionRef, {data, ChannelId0, 0, <<"2\n">>}},
case ssh_test_lib:receive_exec_result(Data0) of
expected ->
ok;
Other0 ->
ct:fail(Other0)
end,
ssh_test_lib:receive_exec_end(ConnectionRef, ChannelId0),
%% Test that it is possible to start a new channel and
%% run an other exec on the same connection.
{ok, ChannelId1} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId1,
"2+2.", infinity),
Data1 = {ssh_cm, ConnectionRef, {data, ChannelId1, 0, <<"4\n">>}},
case ssh_test_lib:receive_exec_result(Data1) of
expected ->
ok;
Other1 ->
ct:fail(Other1)
end,
ssh_test_lib:receive_exec_end(ConnectionRef, ChannelId1),
ssh:close(ConnectionRef),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Test that compression option works
exec_compressed(Config) when is_list(Config) ->
case ssh_test_lib:ssh_supports(zlib, compression) of
false ->
{skip, "zlib compression is not supported"};
true ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},{user_dir, UserDir},
{preferred_algorithms,[{compression, [zlib]}]},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}]),
{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId,
"1+1.", infinity),
Data = {ssh_cm, ConnectionRef, {data, ChannelId, 0, <<"2\n">>}},
case ssh_test_lib:receive_exec_result(Data) of
expected ->
ok;
Other ->
ct:fail(Other)
end,
ssh_test_lib:receive_exec_end(ConnectionRef, ChannelId),
ssh:close(ConnectionRef),
ssh:stop_daemon(Pid)
end.
%%--------------------------------------------------------------------
%%% Idle timeout test, client
idle_time_client(Config) ->
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false},
{idle_time, 2000}]),
{ok, Id} = ssh_connection:session_channel(ConnectionRef, 1000),
ssh_connection:close(ConnectionRef, Id),
receive
after 10000 ->
{error, closed} = ssh_connection:session_channel(ConnectionRef, 1000)
end,
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Idle timeout test, server
idle_time_server(Config) ->
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{idle_time, 2000},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}]),
{ok, Id} = ssh_connection:session_channel(ConnectionRef, 1000),
ssh_connection:close(ConnectionRef, Id),
receive
after 10000 ->
{error, closed} = ssh_connection:session_channel(ConnectionRef, 1000)
end,
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Test that ssh:shell/2 works
shell(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{_Pid, _Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
ct:sleep(500),
IO = ssh_test_lib:start_io_server(),
Shell = ssh_test_lib:start_shell(Port, IO, [{user_dir,UserDir}]),
receive
{'EXIT', _, _} ->
ct:fail(no_ssh_connection);
ErlShellStart ->
ct:log("Erlang shell start: ~p~n", [ErlShellStart]),
do_shell(IO, Shell)
after
30000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end.
%%--------------------------------------------------------------------
%%% Test that we could user different types of host pubkey and user pubkey
exec_key_differs1(Config) -> exec_key_differs(Config, ['ecdsa-sha2-nistp256']).
exec_key_differs2(Config) -> exec_key_differs(Config, ['ssh-dss','ecdsa-sha2-nistp256']).
exec_key_differs3(Config) -> exec_key_differs(Config, ['ecdsa-sha2-nistp384','ecdsa-sha2-nistp256']).
exec_key_differs(Config, UserPKAlgs) ->
case lists:usort(['ssh-rsa'|UserPKAlgs])
-- ssh_transport:supported_algorithms(public_key)
of
[] ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system_rsa),
SystemUserDir = filename:join(SystemDir, user),
UserDir = filename:join(proplists:get_value(priv_dir, Config), user_ecdsa_256),
{_Pid, _Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, SystemUserDir},
{preferred_algorithms,
[{public_key,['ssh-rsa'|UserPKAlgs]}]}]),
ct:sleep(500),
IO = ssh_test_lib:start_io_server(),
Shell = ssh_test_lib:start_shell(Port, IO, [{user_dir,UserDir},
{preferred_algorithms,[{public_key,['ssh-rsa']}]},
{pref_public_key_algs,UserPKAlgs}
]),
receive
{'EXIT', _, _} ->
ct:fail(no_ssh_connection);
ErlShellStart ->
ct:log("Erlang shell start: ~p~n", [ErlShellStart]),
do_shell(IO, Shell)
after
30000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end;
UnsupportedPubKeys ->
{skip, io_lib:format("~p unsupported",[UnsupportedPubKeys])}
end.
%%--------------------------------------------------------------------
exec_key_differs_fail(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system_rsa),
SystemUserDir = filename:join(SystemDir, user),
UserDir = filename:join(proplists:get_value(priv_dir, Config), user_ecdsa_256),
{_Pid, _Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, SystemUserDir},
{preferred_algorithms,
[{public_key,['ssh-rsa']}]}]),
ct:sleep(500),
IO = ssh_test_lib:start_io_server(),
ssh_test_lib:start_shell(Port, IO, [{user_dir,UserDir},
{recv_ext_info, false},
{preferred_algorithms,[{public_key,['ssh-rsa']}]},
{pref_public_key_algs,['ssh-dss']}]),
receive
{'EXIT', _, _} ->
ok;
ErlShellStart ->
ct:log("Erlang shell start: ~p~n", [ErlShellStart]),
ct:fail(connection_not_rejected)
after
30000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end.
%%--------------------------------------------------------------------
cli(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
TmpDir = filename:join(proplists:get_value(priv_dir,Config), "tmp"),
ok = ssh_test_lib:del_dirs(TmpDir),
ok = file:make_dir(TmpDir),
{_Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},{user_dir, UserDir},
{password, "morot"},
{ssh_cli, {ssh_test_cli, [cli,TmpDir]}},
{subsystems, []},
{failfun, fun ssh_test_lib:failfun/2}]),
ct:sleep(500),
ConnectionRef = ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user, "foo"},
{password, "morot"},
{user_interaction, false},
{user_dir, UserDir}]),
{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
ssh_connection:shell(ConnectionRef, ChannelId),
ok = ssh_connection:send(ConnectionRef, ChannelId, <<"q">>),
receive
{ssh_cm, ConnectionRef,
{data,0,0, <<"\r\nYou are accessing a dummy, type \"q\" to exit\r\n\n">>}} ->
ok = ssh_connection:send(ConnectionRef, ChannelId, <<"q">>)
after
30000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end,
receive
{ssh_cm, ConnectionRef,{closed, ChannelId}} ->
ok
after
30000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end.
%%--------------------------------------------------------------------
%%% Test that get correct error message if you try to start a daemon
%%% on an adress that already runs a daemon see also seq10667
daemon_already_started(Config) when is_list(Config) ->
SystemDir = proplists:get_value(data_dir, Config),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, _Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
{error, eaddrinuse} = ssh_test_lib:daemon(Port, [{system_dir, SystemDir},
{user_dir, UserDir},
{failfun,
fun ssh_test_lib:failfun/2}]),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% check that known_hosts is updated correctly
known_hosts(Config) when is_list(Config) ->
SystemDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{user_dir, PrivDir},{system_dir, SystemDir},
{failfun, fun ssh_test_lib:failfun/2}]),
KnownHosts = filename:join(PrivDir, "known_hosts"),
file:delete(KnownHosts),
{error, enoent} = file:read_file(KnownHosts),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{user_dir, PrivDir},
{user_interaction, false},
silently_accept_hosts]),
{ok, _Channel} = ssh_connection:session_channel(ConnectionRef, infinity),
ok = ssh:close(ConnectionRef),
{ok, Binary} = file:read_file(KnownHosts),
Lines = string:tokens(binary_to_list(Binary), "\n"),
[Line] = Lines,
[HostAndIp, Alg, _KeyData] = string:tokens(Line, " "),
[StoredHost, _Ip] = string:tokens(HostAndIp, ","),
true = ssh_test_lib:match_ip(StoredHost, Host),
"ssh-" ++ _ = Alg,
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Test that we can use keyes protected by pass phrases
pass_phrase(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
PhraseArg = proplists:get_value(pass_phrase, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
PhraseArg,
{user_dir, UserDir},
{user_interaction, false}]),
{ok, _ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Test that we can use key callback
key_callback(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
NoPubKeyDir = filename:join(UserDir, "nopubkey"),
file:make_dir(NoPubKeyDir),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectOpts = [{silently_accept_hosts, true},
{user_dir, NoPubKeyDir},
{user_interaction, false},
{key_cb, ssh_key_cb}],
ConnectionRef = ssh_test_lib:connect(Host, Port, ConnectOpts),
{ok, _ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Test that we can use key callback with callback options
key_callback_options(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
NoPubKeyDir = filename:join(UserDir, "nopubkey"),
file:make_dir(NoPubKeyDir),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
{ok, PrivKey} = file:read_file(filename:join(UserDir, "id_rsa")),
ConnectOpts = [{silently_accept_hosts, true},
{user_dir, NoPubKeyDir},
{user_interaction, false},
{key_cb, {ssh_key_cb_options, [{priv_key, PrivKey}]}}],
ConnectionRef = ssh_test_lib:connect(Host, Port, ConnectOpts),
{ok, _ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Test that client does not hang if disconnects due to internal error
internal_error(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
{error, Error} =
ssh:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}]),
check_error(Error),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%% Test ssh_connection:send/3
send(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}]),
{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
ok = ssh_connection:send(ConnectionRef, ChannelId, <<"Data">>),
ok = ssh_connection:send(ConnectionRef, ChannelId, << >>),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%%%
fail_daemon_start(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{error,_} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]).
%%--------------------------------------------------------------------
%%% Test ssh:connection_info([peername, sockname])
peername_sockname(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{_Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{subsystems, [{"peername_sockname",
{ssh_peername_sockname_server, []}}
]}
]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}]),
{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:subsystem(ConnectionRef, ChannelId, "peername_sockname", infinity),
[{peer, {_Name, {HostPeerClient,PortPeerClient} = ClientPeer}}] =
ssh:connection_info(ConnectionRef, [peer]),
[{sockname, {HostSockClient,PortSockClient} = ClientSock}] =
ssh:connection_info(ConnectionRef, [sockname]),
ct:log("Client: ~p ~p", [ClientPeer, ClientSock]),
receive
{ssh_cm, ConnectionRef, {data, ChannelId, _, Response}} ->
{PeerNameSrv,SockNameSrv} = binary_to_term(Response),
{HostPeerSrv,PortPeerSrv} = PeerNameSrv,
{HostSockSrv,PortSockSrv} = SockNameSrv,
ct:log("Server: ~p ~p", [PeerNameSrv, SockNameSrv]),
host_equal(HostPeerSrv, HostSockClient),
PortPeerSrv = PortSockClient,
host_equal(HostSockSrv, HostPeerClient),
PortSockSrv = PortPeerClient,
host_equal(HostSockSrv, Host),
PortSockSrv = Port
after 10000 ->
ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end.
host_equal(H1, H2) ->
not ordsets:is_disjoint(ips(H1), ips(H2)).
ips(IP) when is_tuple(IP) -> ordsets:from_list([IP]);
ips(Name) when is_list(Name) ->
{ok,#hostent{h_addr_list=IPs4}} = inet:gethostbyname(Name,inet),
{ok,#hostent{h_addr_list=IPs6}} = inet:gethostbyname(Name,inet6),
ordsets:from_list(IPs4++IPs6).
%%--------------------------------------------------------------------
%%% Client receives close when server closes
close(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Server, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{failfun, fun ssh_test_lib:failfun/2}]),
Client =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false}]),
{ok, ChannelId} = ssh_connection:session_channel(Client, infinity),
ssh:stop_daemon(Server),
receive
{ssh_cm, Client,{closed, ChannelId}} ->
ok
after 5000 ->
ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end.
%%--------------------------------------------------------------------
%%% Simulate that we try to close an already closed connection
double_close(Config) when is_list(Config) ->
SystemDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
{_Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{user_passwords, [{"vego", "morot"}]},
{failfun, fun ssh_test_lib:failfun/2}]),
{ok, CM} = ssh:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user, "vego"},
{password, "morot"},
{user_interaction, false}]),
exit(CM, {shutdown, normal}),
ok = ssh:close(CM).
%%--------------------------------------------------------------------
daemon_opt_fd(Config) ->
SystemDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
{ok,S1} = gen_tcp:listen(0,[]),
{ok,Fd1} = prim_inet:getfd(S1),
{ok,Pid1} = ssh:daemon(0, [{system_dir, SystemDir},
{fd,Fd1},
{user_dir, UserDir},
{user_passwords, [{"vego", "morot"}]},
{failfun, fun ssh_test_lib:failfun/2}]),
{ok,{_Host1,Port1}} = inet:sockname(S1),
{ok, C1} = ssh:connect("localhost", Port1, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user, "vego"},
{password, "morot"},
{user_interaction, false}]),
exit(C1, {shutdown, normal}),
ssh:stop_daemon(Pid1),
gen_tcp:close(S1).
%%--------------------------------------------------------------------
multi_daemon_opt_fd(Config) ->
SystemDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
Test =
fun() ->
{ok,S} = gen_tcp:listen(0,[]),
{ok,Fd} = prim_inet:getfd(S),
{ok,Pid} = ssh:daemon(0, [{system_dir, SystemDir},
{fd,Fd},
{user_dir, UserDir},
{user_passwords, [{"vego", "morot"}]},
{failfun, fun ssh_test_lib:failfun/2}]),
{ok,{_Host,Port}} = inet:sockname(S),
{ok, C} = ssh:connect("localhost", Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user, "vego"},
{password, "morot"},
{user_interaction, false}]),
{S,Pid,C}
end,
Tests = [Test(),Test(),Test(),Test(),Test(),Test()],
[begin
gen_tcp:close(S),
ssh:stop_daemon(Pid),
exit(C, {shutdown, normal})
end || {S,Pid,C} <- Tests].
%%--------------------------------------------------------------------
packet_size_zero(Config) ->
SystemDir = proplists:get_value(data_dir, Config),
PrivDir = proplists:get_value(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
{Server, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{user_passwords, [{"vego", "morot"}]}]),
Conn =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false},
{user, "vego"},
{password, "morot"}]),
{ok,Chan} = ssh_connection:session_channel(Conn, 1000, _MaxPacketSize=0, 60000),
ok = ssh_connection:shell(Conn, Chan),
ssh:close(Conn),
ssh:stop_daemon(Server),
receive
{ssh_cm,Conn,{data,Chan,_Type,_Msg1}} = M ->
ct:log("Got ~p",[M]),
ct:fail(doesnt_obey_max_packet_size_0)
after 5000 ->
ok
end.
%%--------------------------------------------------------------------
shell_no_unicode(Config) ->
new_do_shell(proplists:get_value(io,Config),
[new_prompt,
{type,"io:format(\"hej ~p~n\",[42])."},
{expect,"hej 42"},
{expect,"ok"},
new_prompt,
{type,"exit()."}
]).
%%--------------------------------------------------------------------
shell_unicode_string(Config) ->
new_do_shell(proplists:get_value(io,Config),
[new_prompt,
{type,"io:format(\"こにちわ~ts~n\",[\"四二\"])."},
{expect,"こにちわ四二"},
{expect,"ok"},
new_prompt,
{type,"exit()."}
]).
%%--------------------------------------------------------------------
%%% Test basic connection with openssh_zlib
openssh_zlib_basic_test(Config) ->
case ssh_test_lib:ssh_supports(['[email protected]',none], compression) of
{false,L} ->
{skip, io_lib:format("~p compression is not supported",[L])};
true ->
SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
UserDir = proplists:get_value(priv_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{preferred_algorithms,[{compression, ['[email protected]']}]},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user_interaction, false},
{preferred_algorithms,[{compression, ['[email protected]',
none]}]}
]),
ok = ssh:close(ConnectionRef),
ssh:stop_daemon(Pid)
end.
%%--------------------------------------------------------------------
ssh_info_print(Config) ->
%% Just check that ssh_print:info() crashes
PrivDir = proplists:get_value(priv_dir, Config),
PrintFile = filename:join(PrivDir,info),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = proplists:get_value(data_dir, Config),
Parent = self(),
UnexpFun = fun(Msg,_Peer) ->
Parent ! {unexpected,Msg,self()},
skip
end,
ConnFun = fun(_,_,_) -> Parent ! {connect,self()} end,
{DaemonRef, Host, Port} =
ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"},
{unexpectedfun, UnexpFun},
{connectfun, ConnFun},
{failfun, fun ssh_test_lib:failfun/2}]),
ClientConnRef1 =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user, "foo"},
{password, "morot"},
{user_dir, UserDir},
{unexpectedfun, UnexpFun},
{user_interaction, false}]),
ClientConnRef2 =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user, "foo"},
{password, "morot"},
{user_dir, UserDir},
{unexpectedfun, UnexpFun},
{user_interaction, false}]),
receive
{connect,DaemonConnRef} ->
ct:log("DaemonRef=~p, DaemonConnRef=~p, ClientConnRefs=~p",[DaemonRef, DaemonConnRef,
[ClientConnRef1,ClientConnRef2]
])
after 2000 ->
ok
end,
{ok,D} = file:open(PrintFile, write),
ssh_info:print(D),
ok = file:close(D),
{ok,Bin} = file:read_file(PrintFile),
ct:log("~s",[Bin]),
receive
{unexpected, Msg, Pid} ->
ct:log("~p got unexpected msg ~p",[Pid,Msg]),
ct:log("process_info(~p) = ~n~p",[Pid,process_info(Pid)]),
ok = ssh:close(ClientConnRef1),
ok = ssh:close(ClientConnRef2),
ok = ssh:stop_daemon(DaemonRef),
{fail,"unexpected msg"}
after 1000 ->
ok = ssh:close(ClientConnRef1),
ok = ssh:close(ClientConnRef2),
ok = ssh:stop_daemon(DaemonRef)
end.
%%--------------------------------------------------------------------
%% Check that a basd pwd is not tried more times. Could cause lock-out
%% on server
login_bad_pwd_no_retry1(Config) ->
login_bad_pwd_no_retry(Config, "keyboard-interactive,password").
login_bad_pwd_no_retry2(Config) ->
login_bad_pwd_no_retry(Config, "password,keyboard-interactive").
login_bad_pwd_no_retry3(Config) ->
login_bad_pwd_no_retry(Config, "password,publickey,keyboard-interactive").
login_bad_pwd_no_retry4(Config) ->
login_bad_pwd_no_retry(Config, "password,keyboard-interactive").
login_bad_pwd_no_retry5(Config) ->
login_bad_pwd_no_retry(Config, "password,keyboard-interactive,password,password").
login_bad_pwd_no_retry(Config, AuthMethods) ->
PrivDir = proplists:get_value(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = proplists:get_value(data_dir, Config),
Parent = self(),
PwdFun = fun(_, _, _, undefined) -> {false, 1};
(_, _, _, _) -> Parent ! retry_bad_pwd,
false
end,
{DaemonRef, _Host, Port} =
ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{auth_methods, AuthMethods},
{user_passwords, [{"foo","somepwd"}]},
{pwdfun, PwdFun}
]),
ConnRes = ssh:connect("localhost", Port,
[{silently_accept_hosts, true},
{user, "foo"},
{password, "badpwd"},
{user_dir, UserDir},
{user_interaction, false}]),
receive
retry_bad_pwd ->
ssh:stop_daemon(DaemonRef),
{fail, "Retry bad password"}
after 0 ->
case ConnRes of
{error,"Unable to connect using the available authentication methods"} ->
ssh:stop_daemon(DaemonRef),
ok;
{ok,Conn} ->
ssh:close(Conn),
ssh:stop_daemon(DaemonRef),
{fail, "Connect erroneosly succeded"}
end
end.
%%----------------------------------------------------------------------------
%%% Test that when shell REPL exit with reason normal client receives status 0
shell_exit_status(Config) when is_list(Config) ->
process_flag(trap_exit, true),
SystemDir = proplists:get_value(data_dir, Config),
UserDir = proplists:get_value(priv_dir, Config),
ShellFun = fun (_User) -> spawn(fun() -> ok end) end,
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir},
{user_dir, UserDir},
{user_passwords, [{"vego", "morot"}]},
{shell, ShellFun},
{failfun, fun ssh_test_lib:failfun/2}]),
ConnectionRef =
ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user_dir, UserDir},
{user, "vego"},
{password, "morot"},
{user_interaction, false}]),
{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
ok = ssh_connection:shell(ConnectionRef, ChannelId),
ssh_test_lib:receive_exec_end(ConnectionRef, ChannelId),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
%% Internal functions ------------------------------------------------
%%--------------------------------------------------------------------
%% Due to timing the error message may or may not be delivered to
%% the "tcp-application" before the socket closed message is recived
check_error("Invalid state") ->
ok;
check_error("Connection closed") ->
ok;
check_error("Selection of key exchange algorithm failed"++_) ->
ok;
check_error(Error) ->
ct:fail(Error).
basic_test(Config) ->
ClientOpts = proplists:get_value(client_opts, Config),
ServerOpts = proplists:get_value(server_opts, Config),
{Pid, Host, Port} = ssh_test_lib:daemon(ServerOpts),
{ok, CM} = ssh:connect(Host, Port, ClientOpts),
ok = ssh:close(CM),
ssh:stop_daemon(Pid).
do_shell(IO, Shell) ->
receive
ErlPrompt0 ->
ct:log("Erlang prompt: ~p~n", [ErlPrompt0])
end,
IO ! {input, self(), "1+1.\r\n"},
receive
Echo0 ->
ct:log("Echo: ~p ~n", [Echo0])
after
10000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end,
receive
?NEWLINE ->
ok
after
10000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end,
receive
Result0 = <<"2">> ->
ct:log("Result: ~p~n", [Result0])
after
10000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end,
receive
?NEWLINE ->
ok
after
10000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end,
receive
ErlPrompt1 ->
ct:log("Erlang prompt: ~p~n", [ErlPrompt1])
after
10000 -> ct:fail("timeout ~p:~p",[?MODULE,?LINE])
end,
exit(Shell, kill).
%%Does not seem to work in the testserver!
%% IO ! {input, self(), "q().\r\n"},
%% receive
%% ?NEWLINE ->
%% ok
%% end,
%% receive
%% Echo1 ->
%% ct:log("Echo: ~p ~n", [Echo1])
%% end,
%% receive
%% ?NEWLINE ->
%% ok
%% end,
%% receive
%% Result1 ->
%% ct:log("Result: ~p~n", [Result1])
%% end,
%% receive
%% {'EXIT', Shell, killed} ->
%% ok
%% end.
%%--------------------------------------------------------------------
wait_for_erlang_first_line(Config) ->
receive
{'EXIT', _, _} ->
{fail,no_ssh_connection};
<<"Eshell ",_/binary>> = _ErlShellStart ->
ct:log("Erlang shell start: ~p~n", [_ErlShellStart]),
Config;
Other ->
ct:log("Unexpected answer from ssh server: ~p",[Other]),
{fail,unexpected_answer}
after 10000 ->
ct:log("No answer from ssh-server"),
{fail,timeout}
end.
new_do_shell(IO, List) -> new_do_shell(IO, 0, List).
new_do_shell(IO, N, [new_prompt|More]) ->
new_do_shell(IO, N+1, More);
new_do_shell(IO, N, Ops=[{Order,Arg}|More]) ->
Pfx = prompt_prefix(),
PfxSize = size(Pfx),
receive
_X = <<"\r\n">> ->
ct:log("Skip newline ~p",[_X]),
new_do_shell(IO, N, Ops);
<<P1,"> ">> when (P1-$0)==N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<"(",Pfx:PfxSize/binary,")",P1,"> ">> when (P1-$0)==N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<"('",Pfx:PfxSize/binary,"')",P1,"> ">> when (P1-$0)==N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<P1,P2,"> ">> when (P1-$0)*10 + (P2-$0) == N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<"(",Pfx:PfxSize/binary,")",P1,P2,"> ">> when (P1-$0)*10 + (P2-$0) == N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<"('",Pfx:PfxSize/binary,"')",P1,P2,"> ">> when (P1-$0)*10 + (P2-$0) == N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<P1,P2,P3,"> ">> when (P1-$0)*100 + (P2-$0)*10 + (P3-$0) == N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<"(",Pfx:PfxSize/binary,")",P1,P2,P3,"> ">> when (P1-$0)*100 + (P2-$0)*10 + (P3-$0) == N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
<<"('",Pfx:PfxSize/binary,"')",P1,P2,P3,"> ">> when (P1-$0)*100 + (P2-$0)*10 + (P3-$0) == N ->
new_do_shell_prompt(IO, N, Order, Arg, More);
Err when element(1,Err)==error ->
ct:fail("new_do_shell error: ~p~n",[Err]);
RecBin when Order==expect ; Order==expect_echo ->
ct:log("received ~p",[RecBin]),
RecStr = string:strip(unicode:characters_to_list(RecBin)),
ExpStr = string:strip(Arg),
case lists:prefix(ExpStr, RecStr) of
true when Order==expect ->
ct:log("Matched ~ts",[RecStr]),
new_do_shell(IO, N, More);
true when Order==expect_echo ->
ct:log("Matched echo ~ts",[RecStr]),
new_do_shell(IO, N, More);
false ->
ct:fail("*** Expected ~p, but got ~p",[string:strip(ExpStr),RecStr])
end
after 30000 ->
ct:log("Meassage queue of ~p:~n~p",
[self(), erlang:process_info(self(), messages)]),
case Order of
expect -> ct:fail("timeout, expected ~p",[string:strip(Arg)]);
type -> ct:fail("timeout, no prompt")
end
end;
new_do_shell(_, _, []) ->
ok.
prompt_prefix() ->
case node() of
nonode@nohost -> <<>>;
Node -> list_to_binary(
atom_to_list(Node))
end.
new_do_shell_prompt(IO, N, type, Str, More) ->
ct:log("Matched prompt ~p to trigger sending of next line to server",[N]),
IO ! {input, self(), Str++"\r\n"},
ct:log("Promt '~p> ', Sent ~ts",[N,Str++"\r\n"]),
new_do_shell(IO, N, [{expect_echo,Str}|More]); % expect echo of the sent line
new_do_shell_prompt(IO, N, Op, Str, More) ->
ct:log("Matched prompt ~p",[N]),
new_do_shell(IO, N, [{Op,Str}|More]).
%%--------------------------------------------------------------------