%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2008-2014. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
%% compliance with the License. You should have received a copy of the
%% Erlang Public License along with this software. If not, it can be
%% retrieved online at http://www.erlang.org/.
%%
%% Software distributed under the License is distributed on an "AS IS"
%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
%% the License for the specific language governing rights and limitations
%% under the License.
%%
%% %CopyrightEnd%
%%
%%
-module(ssh_connection_SUITE).
-include_lib("common_test/include/ct.hrl").
-compile(export_all).
-define(SSH_DEFAULT_PORT, 22).
-define(EXEC_TIMEOUT, 10000).
%%--------------------------------------------------------------------
%% Common Test interface functions -----------------------------------
%%--------------------------------------------------------------------
%% suite() ->
%% [{ct_hooks,[ts_install_cth]}].
all() ->
[
{group, openssh_payload},
interrupted_send,
start_shell,
start_shell_exec,
start_shell_exec_fun,
gracefull_invalid_version,
gracefull_invalid_start,
gracefull_invalid_long_start,
gracefull_invalid_long_start_no_nl
].
groups() ->
[{openssh_payload, [], [simple_exec,
small_cat,
big_cat,
send_after_exit
]}].
%%--------------------------------------------------------------------
init_per_suite(Config) ->
case catch crypto:start() of
ok ->
Config;
_Else ->
{skip, "Crypto could not be started!"}
end.
end_per_suite(_Config) ->
crypto:stop().
%%--------------------------------------------------------------------
init_per_group(openssh_payload, _Config) ->
case gen_tcp:connect("localhost", 22, []) of
{error,econnrefused} ->
{skip,"No openssh deamon"};
{ok, Socket} ->
gen_tcp:close(Socket)
end;
init_per_group(_, Config) ->
Config.
end_per_group(_, Config) ->
Config.
%%--------------------------------------------------------------------
init_per_testcase(_TestCase, Config) ->
%% To make sure we start clean as it is not certain that
%% end_per_testcase will be run!
ssh:stop(),
ssh:start(),
Config.
end_per_testcase(_Config) ->
ssh:stop().
%%--------------------------------------------------------------------
%% Test Cases --------------------------------------------------------
%%--------------------------------------------------------------------
simple_exec() ->
[{doc, "Simple openssh connectivity test for ssh_connection:exec"}].
simple_exec(Config) when is_list(Config) ->
ConnectionRef = ssh_test_lib:connect(?SSH_DEFAULT_PORT, [{silently_accept_hosts, true},
{user_interaction, false}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId0,
"echo testing", infinity),
%% receive response to input
receive
{ssh_cm, ConnectionRef, {data, ChannelId0, 0, <<"testing\n">>}} ->
ok
end,
%% receive close messages
receive
{ssh_cm, ConnectionRef, {eof, ChannelId0}} ->
ok
end,
receive
{ssh_cm, ConnectionRef, {exit_status, ChannelId0, 0}} ->
ok
end,
receive
{ssh_cm, ConnectionRef,{closed, ChannelId0}} ->
ok
end.
%%--------------------------------------------------------------------
small_cat() ->
[{doc, "Use 'cat' to echo small data block back to us."}].
small_cat(Config) when is_list(Config) ->
ConnectionRef = ssh_test_lib:connect(?SSH_DEFAULT_PORT, [{silently_accept_hosts, true},
{user_interaction, false}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId0,
"cat", infinity),
Data = <<"I like spaghetti squash">>,
ok = ssh_connection:send(ConnectionRef, ChannelId0, Data),
ok = ssh_connection:send_eof(ConnectionRef, ChannelId0),
%% receive response to input
receive
{ssh_cm, ConnectionRef, {data, ChannelId0, 0, Data}} ->
ok
end,
%% receive close messages
receive
{ssh_cm, ConnectionRef, {eof, ChannelId0}} ->
ok
end,
receive
{ssh_cm, ConnectionRef, {exit_status, ChannelId0, 0}} ->
ok
end,
receive
{ssh_cm, ConnectionRef,{closed, ChannelId0}} ->
ok
end.
%%--------------------------------------------------------------------
big_cat() ->
[{doc,"Use 'cat' to echo large data block back to us."}].
big_cat(Config) when is_list(Config) ->
ConnectionRef = ssh_test_lib:connect(?SSH_DEFAULT_PORT, [{silently_accept_hosts, true},
{user_interaction, false}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId0,
"cat", infinity),
%% build 10MB binary
Data = << <<X:32>> || X <- lists:seq(1,2500000)>>,
%% pre-adjust receive window so the other end doesn't block
ssh_connection:adjust_window(ConnectionRef, ChannelId0, size(Data)),
ct:pal("sending ~p byte binary~n",[size(Data)]),
ok = ssh_connection:send(ConnectionRef, ChannelId0, Data, 10000),
ok = ssh_connection:send_eof(ConnectionRef, ChannelId0),
%% collect echoed data until eof
case big_cat_rx(ConnectionRef, ChannelId0) of
{ok, Data} ->
ok;
{ok, Other} ->
case size(Data) =:= size(Other) of
true ->
ct:pal("received and sent data are same"
"size but do not match~n",[]);
false ->
ct:pal("sent ~p but only received ~p~n",
[size(Data), size(Other)])
end,
ct:fail(receive_data_mismatch);
Else ->
ct:fail(Else)
end,
%% receive close messages (eof already consumed)
receive
{ssh_cm, ConnectionRef, {exit_status, ChannelId0, 0}} ->
ok
end,
receive
{ssh_cm, ConnectionRef,{closed, ChannelId0}} ->
ok
end.
%%--------------------------------------------------------------------
send_after_exit() ->
[{doc, "Send channel data after the channel has been closed."}].
send_after_exit(Config) when is_list(Config) ->
ConnectionRef = ssh_test_lib:connect(?SSH_DEFAULT_PORT, [{silently_accept_hosts, true},
{user_interaction, false}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
Data = <<"I like spaghetti squash">>,
%% Shell command "false" will exit immediately
success = ssh_connection:exec(ConnectionRef, ChannelId0,
"false", infinity),
receive
{ssh_cm, ConnectionRef, {eof, ChannelId0}} ->
ok
end,
receive
{ssh_cm, ConnectionRef, {exit_status, ChannelId0, _ExitStatus}} ->
ok
end,
receive
{ssh_cm, ConnectionRef,{closed, ChannelId0}} ->
ok
end,
case ssh_connection:send(ConnectionRef, ChannelId0, Data, 2000) of
{error, closed} -> ok;
ok ->
ct:fail({expected,{error,closed}, {got, ok}});
{error, timeout} ->
ct:fail({expected,{error,closed}, {got, {error, timeout}}});
Else ->
ct:fail(Else)
end.
%%--------------------------------------------------------------------
interrupted_send() ->
[{doc, "Use a subsystem that echos n char and then sends eof to cause a channel exit partway through a large send."}].
interrupted_send(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"},
{subsystems, [{"echo_n", {ssh_echo_server, [4000000]}}]}]),
ConnectionRef = ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user, "foo"},
{password, "morot"},
{user_interaction, false},
{user_dir, UserDir}]),
{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:subsystem(ConnectionRef, ChannelId, "echo_n", infinity),
%% build 10MB binary
Data = << <<X:32>> || X <- lists:seq(1,2500000)>>,
%% expect remote end to send us 4MB back
<<ExpectedData:4000000/binary, _/binary>> = Data,
%% pre-adjust receive window so the other end doesn't block
ssh_connection:adjust_window(ConnectionRef, ChannelId, size(ExpectedData) + 1),
case ssh_connection:send(ConnectionRef, ChannelId, Data, 10000) of
{error, closed} ->
ok;
Msg ->
ct:fail({expected,{error,closed}, got, Msg})
end,
receive_data(ExpectedData, ConnectionRef, ChannelId),
ssh:close(ConnectionRef),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
start_shell() ->
[{doc, "Start a shell"}].
start_shell(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"},
{shell, fun(U, H) -> start_our_shell(U, H) end} ]),
ConnectionRef = ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user, "foo"},
{password, "morot"},
{user_interaction, true},
{user_dir, UserDir}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
ok = ssh_connection:shell(ConnectionRef,ChannelId0),
receive
{ssh_cm,ConnectionRef, {data, ChannelId0, 0, <<"Enter command\r\n">>}} ->
ok
after 5000 ->
ct:fail("CLI Timeout")
end,
ssh:close(ConnectionRef),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
start_shell_exec() ->
[{doc, "start shell to exec command"}].
start_shell_exec(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"},
{exec, {?MODULE,ssh_exec,[]}} ]),
ConnectionRef = ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user, "foo"},
{password, "morot"},
{user_interaction, true},
{user_dir, UserDir}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId0,
"testing", infinity),
receive
{ssh_cm,ConnectionRef, {data, ChannelId0, 0, <<"testing\r\n">>}} ->
ok
after 5000 ->
ct:fail("Exec Timeout")
end,
ssh:close(ConnectionRef),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
start_shell_exec_fun() ->
[{doc, "start shell to exec command"}].
start_shell_exec_fun(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"},
{exec, fun ssh_exec/1}]),
ConnectionRef = ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true},
{user, "foo"},
{password, "morot"},
{user_interaction, true},
{user_dir, UserDir}]),
{ok, ChannelId0} = ssh_connection:session_channel(ConnectionRef, infinity),
success = ssh_connection:exec(ConnectionRef, ChannelId0,
"testing", infinity),
receive
{ssh_cm,ConnectionRef, {data, ChannelId0, 0, <<"testing\r\n">>}} ->
ok
after 5000 ->
ct:fail("Exec Timeout")
end,
ssh:close(ConnectionRef),
ssh:stop_daemon(Pid).
%%--------------------------------------------------------------------
gracefull_invalid_version(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{_Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"}]),
{ok, S} = gen_tcp:connect(Host, Port, []),
ok = gen_tcp:send(S, ["SSH-8.-1","\r\n"]),
receive
Verstring ->
ct:pal("Server version: ~p~n", [Verstring]),
receive
{tcp_closed, S} ->
ok
end
end.
gracefull_invalid_start(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{_Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"}]),
{ok, S} = gen_tcp:connect(Host, Port, []),
ok = gen_tcp:send(S, ["foobar","\r\n"]),
receive
Verstring ->
ct:pal("Server version: ~p~n", [Verstring]),
receive
{tcp_closed, S} ->
ok
end
end.
gracefull_invalid_long_start(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{_Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"}]),
{ok, S} = gen_tcp:connect(Host, Port, []),
ok = gen_tcp:send(S, [lists:duplicate(257, $a), "\r\n"]),
receive
Verstring ->
ct:pal("Server version: ~p~n", [Verstring]),
receive
{tcp_closed, S} ->
ok
end
end.
gracefull_invalid_long_start_no_nl(Config) when is_list(Config) ->
PrivDir = ?config(priv_dir, Config),
UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth
file:make_dir(UserDir),
SysDir = ?config(data_dir, Config),
{_Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SysDir},
{user_dir, UserDir},
{password, "morot"}]),
{ok, S} = gen_tcp:connect(Host, Port, []),
ok = gen_tcp:send(S, [lists:duplicate(257, $a), "\r\n"]),
receive
Verstring ->
ct:pal("Server version: ~p~n", [Verstring]),
receive
{tcp_closed, S} ->
ok
end
end.
%%--------------------------------------------------------------------
%% Internal functions ------------------------------------------------
%%--------------------------------------------------------------------
big_cat_rx(ConnectionRef, ChannelId) ->
big_cat_rx(ConnectionRef, ChannelId, []).
big_cat_rx(ConnectionRef, ChannelId, Acc) ->
receive
{ssh_cm, ConnectionRef, {data, ChannelId, 0, Data}} ->
%% ssh_connection:adjust_window(ConnectionRef, ChannelId, size(Data)),
%% window was pre-adjusted, don't adjust again here
big_cat_rx(ConnectionRef, ChannelId, [Data | Acc]);
{ssh_cm, ConnectionRef, {eof, ChannelId}} ->
{ok, iolist_to_binary(lists:reverse(Acc))}
after ?EXEC_TIMEOUT ->
timeout
end.
receive_data(ExpectedData, ConnectionRef, ChannelId) ->
ExpectedData = collect_data(ConnectionRef, ChannelId).
collect_data(ConnectionRef, ChannelId) ->
collect_data(ConnectionRef, ChannelId, []).
collect_data(ConnectionRef, ChannelId, Acc) ->
receive
{ssh_cm, ConnectionRef, {data, ChannelId, 0, Data}} ->
collect_data(ConnectionRef, ChannelId, [Data | Acc]);
{ssh_cm, ConnectionRef, {eof, ChannelId}} ->
iolist_to_binary(lists:reverse(Acc))
after 5000 ->
timeout
end.
%%%-------------------------------------------------------------------
% This is taken from the ssh example code.
start_our_shell(_User, _Peer) ->
spawn(fun() ->
io:format("Enter command\n")
%% Don't actually loop, just exit
end).
ssh_exec(Cmd) ->
spawn(fun() ->
io:format(Cmd ++ "\n")
end).
