path: root/lib/ssl/doc/src/notes.xml

<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">

<chapter>
  <header>
    <copyright>
      <year>1999</year><year>2010</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      The contents of this file are subject to the Erlang Public License,
      Version 1.1, (the "License"); you may not use this file except in
      compliance with the License. You should have received a copy of the
      Erlang Public License along with this software. If not, it can be
      retrieved online at http://www.erlang.org/.

      Software distributed under the License is distributed on an "AS IS"
      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
      the License for the specific language governing rights and limitations
      under the License.

    </legalnotice>

    <title>SSL Release Notes</title>
    <prepared>Peter H&ouml;gfeldt</prepared>
    <docno></docno>
    <date>2003-08-03</date>
    <rev>G</rev>
    <file>notes.xml</file>
  </header>
  <p>This document describes the changes made to the SSL application.
    </p>
<section><title>SSL 3.11</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            Fixes handling of the option fail_if_no_peer_cert and
            some undocumented options. Thanks to Rory Byrne.</p>
          <p>
            Own Id: OTP-8557</p>
        </item>
      </list>
    </section>

    <section><title>Improvements and New Features</title>
      <list>
        <item>
          <p>
            Support for Diffie-Hellman. ssl-3.11 requires
            public_key-0.6.</p>
          <p>
            Own Id: OTP-7046</p>
        </item>
        <item>
          <p>
            New ssl now properly handles ssl renegotiation, and
            initiates a renegotiation if ssl/ltls-sequence numbers
            comes close to the max value. However RFC-5746 is not yet
            supported, but will be in an upcoming release.</p>
          <p>
            Own Id: OTP-8517</p>
        </item>
        <item>
          <p>
            When gen_tcp is configured with the {packet,http} option,
            it automatically switches to expect HTTP Headers after a
            HTTP Request/Response line has been received. This update
            fixes ssl to behave in the same way. Thanks to Rory
            Byrne.</p>
          <p>
            Own Id: OTP-8545</p>
        </item>
        <item>
          <p>
            Ssl now correctly verifies the extended_key_usage
            extension and also allows the user to verify application
            specific extensions by supplying an appropriate fun.</p>
          <p>
            Own Id: OTP-8554 Aux Id: OTP-8553 </p>
        </item>
        <item>
          <p>
            Fixed ssl:transport_accept/2 to return properly when
            socket is closed. Thanks to Rory Byrne.</p>
          <p>
            Own Id: OTP-8560</p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.9</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            Fixed a crash in the certificate certification part.</p>
          <p>
            Own Id: OTP-8510 Aux Id: seq11525 </p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.8</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
            <p><c>ssl:send/2</c> ignored packet option, fix provided
            by YAMASHINA Hio.</p>
            <p>Fixed a file cache bug which caused problems when the
            same file was used for both cert and cacert.</p>
            <p>Allow <c>ssl:listen/2</c> to be called with option
            {ssl_imp, old}.</p>
            <p> Fixed ssl:setopts(Socket, binary) which didn't work
            for 'new' ssl.</p>.
          <p>
            Own Id: OTP-8441</p>
        </item>
        <item>
          <p>
            Do a controlled shutdown if a non ssl packet arrives as
            the first packet.</p>
          <p>
            Own Id: OTP-8459 Aux Id: seq11505 </p>
        </item>
      </list>
    </section>


    <section><title>Improvements and New Features</title>
      <list>
        <item>
            <p>Fixed session reuse (in new_ssl), thanks Wil Tan.</p>
            <p>Send CA list during Certificate Request (in new_ssl) ,
            thanks Wil Tan.</p> <p><c>NOTE</c>: SSL (new_ssl)
            requires public_key-0.5.</p>
          <p>
            Own Id: OTP-8372</p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.7</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            A ticker process could potentially be blocked
            indefinitely trying to send a tick to a node not
            responding. If this happened, the connection would not be
            brought down as it should.</p>
	  <p> This requires erts-5.7.4 and kernel-2.13.4 or later 
	    to be able to get the erlang distribution over ssl to work.</p>
          <p>
            Own Id: OTP-8218</p>
        </item>
      </list>
    </section>


    <section><title>Improvements and New Features</title>
      <list>
        <item>
          <p>
            The documentation is now built with open source tools
            (xsltproc and fop) that exists on most platforms. One
            visible change is that the frames are removed.</p>
          <p>
            Own Id: OTP-8250</p>
        </item>
        <item>
          <p>
            Code cleanup from Kostis.</p>
          <p>
            Own Id: OTP-8260</p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.6</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            The ssl:ssl_accept/3 issue was not properly fixed in the
            previous patch, see OTP-8244.</p>
          <p>
            Own Id: OTP-8275 Aux Id: seq11451 </p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.5</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            Allow clients to not send certificates if option
            <c>fail_if_no_peer_cert</c> was not set.</p>
          <p>
            Own Id: OTP-8224</p>
        </item>
        <item>
            <p>A ssl:ssl_accept/3 could crash a connection if the
            timing was wrong.</p> <p>Removed info message if the
            socket closed without a proper disconnect from the ssl
            layer. </p> <p>ssl:send/2 is now blocking until the
            message is sent.</p>
          <p>
            Own Id: OTP-8244 Aux Id: seq11420 </p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.4</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            A client could avoid a certificate check if the client
            code didn't send the requested certificate.</p>
          <p>
            Own Id: OTP-8137</p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.3</title>

    <section><title>Improvements and New Features</title>
      <list>
        <item>
            <p>Packet handling was not implemented correctly.</p>
            <p>Inet option handling support have been improved.</p>
            <p>The <c>verify_fun</c> is now invoked even if
            verify_peer is used, that implies that by default
            {bad_cert,unknown_ca} is an accepted fault during the
            client connection phase. The check can still be done by
            suppling another verify_fun.</p>
          <p>
            Own Id: OTP-8011 Aux Id: seq11287 </p>
        </item>
      </list>
    </section>

</section>


<section><title>SSL 3.10.2</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            A "new_ssl" socket was not closed if the controlling
            process died without calling ssl:close/1.</p>
          <p>
            Own Id: OTP-7963 Aux Id: seq11276 </p>
        </item>
      </list>
    </section>

</section>

<section><title>SSL 3.10.1</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            Fixed bug that caused the ssl handshake finished message
            to be calculated wrongly under the circumstances that the
            server did not send the trusted cert and that the
            previous cert did not have the extension telling us the
            trusted certs name. This manifested it self as
            bad_record_mac alert from the server.</p>
          <p>
            Own Id: OTP-7878</p>
        </item>
      </list>
    </section>


    <section><title>Improvements and New Features</title>
      <list>
        <item>
          <p>
            The cacertsfile option is now optional for ssl servers.</p>
          <p>
            Own Id: OTP-7656</p>
        </item>
        <item>
          <p>
            For the ssl client the options cacertfile, certfile and
            keyfile are now optional as they are not always needed
            depending on configuration of the client itself and the
            configuration of the server. Also as PEM-files may
            contain more than one entry the keyfile option will
            default to the same file as given by the certfile option.</p>
          <p>
            Own Id: OTP-7870</p>
        </item>
        <item>
          <p>
            Added new ssl client option verify_fun.</p>
          <p>
            Own Id: OTP-7871</p>
        </item>
      </list>
    </section>

</section>
    
  <section><title>SSL 3.10</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            Error log entries are now formatted correctly.</p>
          <p>
            Own Id: OTP-7258</p>
        </item>
      </list>
    </section>


    <section><title>Improvements and New Features</title>
      <list>
        <item>
          <p>
            All handling of X509-certificates and public keys have
            been moved to the new application public_key.</p>
          <p>
            Own Id: OTP-6894</p>
        </item>
        <item>
          <p>
            New ssl now supports SSL-3.0 and TLS-1.0</p>
          <p>
            Own Id: OTP-7037</p>
        </item>
        <item>
          <p>
            New ssl now supports all inet-packet types.</p>
          <p>
            Own Id: OTP-7039</p>
        </item>
        <item>
          <p>
            The new ssl-server is now able to send a certificate
            request to the client. However new options may be
            introduced later to fully support all features regarding
            certificate requests.</p>
          <p>
            Own Id: OTP-7150</p>
        </item>
      </list>
    </section>


    <section><title>Known Bugs and Problems</title>
      <list>
        <item>
          <p>
            Running erlang distribution over ssl don't work as
            described in the documentation.</p>
          <p>
            Own Id: OTP-7536</p>
        </item>
      </list>
    </section>
    
  </section>

    
  <section><title>SSL 3.9</title>

    <section><title>Fixed Bugs and Malfunctions</title>
      <list>
        <item>
          <p>
            ssl_prim.erl was passing an FD rather than an #sslsocket
            to ssl_broker:ssl_accept_prim. This could cause problems
            in the deprecated accept function, this will not cause
            any more problems however this function is deprecated!</p>
          <p>
            Own Id: OTP-6926</p>
        </item>
        <item>
          <p>
            Erlang distribution over ssl was broken after R11B-0,
            this has now been fixed.</p>
          <p>
            Own Id: OTP-7004</p>
        </item>
      </list>
    </section>


    <section><title>Improvements and New Features</title>
      <list>
        <item>
          <p>
            All inet options are available in the new ssl
            implementation that is released as a alfa in ssl-3.9 and
            will replace the old implementation in ssl-4.0. This will
            not be fixed in the old implementation.</p>
          <p>
            Own Id: OTP-4677</p>
        </item>
        <item>
          <p>
            The new ssl implementation released as a alfa in this
            version supports upgrading of a tcp connection to a ssl
            connection so that http client and servers may implement
            RFC 2817.</p>
          <p>
            Own Id: OTP-5510</p>
        </item>
        <item>
            <p>A new implementation of ssl is released as a alfa
            version in ssl-3.9 it will later replace the old
            implementation in ssl-4.0. The new implementation can be
            accessed by providing the option {ssl_imp, new} to the
            ssl:connect and ssl:listen functions.</p>
            <p>The new implementation is Erlang based and all logic
            is in Erlang and only payload encryption calculations are
            done in C via the crypto application. The main reason for
            making a new implementation is that the old solution was
            very crippled as the control of the ssl-socket was deep
            down in openssl making it hard if not impossible to
            support all inet options, ipv6 and upgrade of a tcp
            connection to a ssl connection. The alfa version has a
            few limitations that will be removed before the ssl-4.0
            release. Main differences and limitations in the alfa are
            listed below.</p>
          
            <list type="bulleted"> <item>New ssl requires the crypto
            application.</item> <item>The option reuseaddr is
            supported and the default value is false as in gen_tcp.
            Old ssl is patched to accept that the option is set to
            true to provide a smoother migration between the
            versions. In old ssl the option is hard coded to
            true.</item> <item>ssl:version/0 is replaced by
            ssl:versions/0</item> <item>ssl:ciphers/0 is replaced by
            ssl:cipher_suites/0</item> <item>ssl:pid/1 is a
            meaningless function in new ssl and will be deprecated in
            ssl-4.0 until it is removed it will return a valid but
            meaningless pid.</item> <item>New API functions are
            ssl:shutdown/2, ssl:cipher_suites/[0,1] and
            ssl:versions/0</item> <item>Diffie-Hellman keyexchange is
            not supported.</item> <item>Not all inet packet types are
            supported.</item> <item>CRL and policy certificate
            extensions are not supported.</item> <item>In this alfa
            only sslv3 is enabled, although tlsv1 and tlsv1.1
            versions are implemented and will be supported in future
            versions.</item> <item>For security reasons sslv2 is not
            supported.</item> </list> 
          <p>
            Own Id: OTP-6619</p>
        </item>
        <item>
          <p>
            New ssl implementation, released as alfa in ssl-3.9,
            supports ipv6. It will not be supported in the old
            implementation.</p>
          <p>
            Own Id: OTP-6637 Aux Id: OTP-6636 </p>
        </item>
      </list>
    </section>

  </section>

  <section>
    <title>SSL 3.1.1.1</title>

    <section>
      <title>Minor Makefile changes</title>
      <list type="bulleted">
        <item>
          <p>Removed use of <c>erl_flags</c> from Makefile.</p>
          <p>Own Id: OTP-6689</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.1.1</title>

    <section>
      <title>Crash on error in ssl_accept</title>
      <list type="bulleted">
        <item>
          <p>A bug in ssl_accept could cause all ssl
            connections to hang when a connection
            attempt was closed by the client while
            the server was in <c>ssl_accept</c>.</p>
          <p>Own Id: OTP-6612 Aux Id: seq10599</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.1</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>SSL now uses a two-phase accept, with a separate accept
            calls for the socket and the ssl protocol. This avoids
            timeouts when a client doesn't initiate ssl handshake.</p>
          <p>With the old implementation of accept, the server
            was locked by a client, if the client didn't do
            proper ssl handshake.</p>
          <p>Own Id: OTP-6418 Aux Id: seq10105</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.0.12</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>An integer array pointing to a struct pollfd array, is
            now reset before file descriptors are collected to be
            included in a call to poll(). This is to prevent file
            descriptors to be mixed up.</p>
          <p>Own Id: OTP-6084</p>
        </item>
        <item>
          <p>The generation of the module ssl_pkix_oid contained
            multiple identifiers, which made the mapping between
            atoms and identifiers not one-to-one.</p>
          <p>Own Id: OTP-6085</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.0.11</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>The state of a connection in active mode could be in a
            restrictive state, so that an internal tcp_closed message
            was incorrectly considered illegal, resulting in a
            premature termination of the connection process.</p>
          <p>Own Id: OTP-5972 Aux Id: seq10188 </p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.0.10</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>Erlang distribution over SSL was broken. Corrected.
            (Thanks to Fredrik Thulin.)</p>
          <p>Own Id: OTP-5863</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.0.9</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>The port program for the ssl application could waste huge
            amounts of CPU time if a write could not be completed
            directly and was put in the write queue. (Only on platforms
            where poll() is used, such as Solaris and Linux.)</p>
          <p>Own Id: OTP-5784</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.0.8</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>A process reading only a portion of a sufficiently large
            amount of data from an accepted socket, and then quering
            the ssl library (e.g. ssl:getpeername()), would cause a
            global deadlock in the esock port program.</p>
          <p>Own Id: OTP-5702</p>
        </item>
        <item>
          <p>A spelling error in the module <c>ssl_pkix</c> caused the
            call to <c>ssl:peercert/2</c> to fail when the option
            <c>subject</c> was used.</p>
          <p>Own Id: OTP-5708</p>
        </item>
        <item>
          <p>Because fopen() on Solaris 8 can't handle file
            descriptor numbers above 255, reading of certificate
            files would fail if all file descriptors below 256 were
            in use (typically, if many connections were open). This
            problem has been worked around.</p>
          <p>The ssl application's port program used to use
            select(), which meant that it could not handle more than
            FD_SETSIZE file descriptors (usually 1024). To eliminate
            that limitation, poll() is now used on all platforms that
            support it.</p>
          <p>Solaris/Sparc, 64-bit emulator: The SO_REUSEADDR
            option was not set for listen sockets, which essentially
            made the ssl application unusable. Corrected.</p>
          <p>The default listen queue size for ssl port program was
            changed to 128 (from 5).</p>
          <p>Own Id: OTP-5755 Aux Id: seq10068 </p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>Ssl 3.0.7</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>The R/W buffer length i esock.c was too small. It has
            been increased from 4k to 32k.</p>
          <p>Own Id: OTP-5620</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>Ssl 3.0.6</title>

    <section>
      <title>Improvements and New Features</title>
      <list type="bulleted">
        <item>
          <p>A configuration option for choosing protocol versions has
            been added (<c>sslv2</c>, <c>sslv3</c>, and
            <c>tlsv1</c>).</p>
          <p>Own Id: OTP-5429 Aux Id: seq9755 </p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>Ssl 3.0.5</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>Linked in drivers in the crypto, and asn1 applications
            are now compiled with the -D_THREAD_SAFE and -D_REENTRANT
            switches on unix when the emulator has thread support
            enabled.</p>
          <p>Linked in drivers on MacOSX are not compiled with the
            undocumented -lbundle1.o switch anymore. Thanks to Sean
            Hinde who sent us a patch.</p>
          <p>Linked in driver in crypto, and port programs in ssl, now
            compiles on OSF1.</p>
          <p>Minor makefile improvements in runtime_tools.</p>
          <p>Own Id: OTP-5346</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>Ssl 3.0.4</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p><c>ssl:recv/3</c> with finite timeout value, closed the
            connection at timeout.</p>
          <p>Own Id: OTP-4882</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>Ssl 3.0.3</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>When a file descriptor was marked for closing, and and
            end-of-file condition had already been detected, the file
            descriptor was never closed.</p>
          <p>Own Id: OTP-5093 Aux Id: seq8806 </p>
        </item>
        <item>
          <p>When the number of open file descriptors reached
            FD_SETSIZE, the SSL port program entered a busy loop.</p>
          <p>Own Id: OTP-5094 Aux Id: seq8806 </p>
        </item>
      </list>
    </section>

    <section>
      <title>Improvements and New Features</title>
      <list type="bulleted">
        <item>
          <p>The SSL application now supports SSL sessions for
            servers, which typically speeds up HTTP requests from
            browsers.</p>
          <p>Own Id: OTP-5095</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 3.0.2</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>The UTF8String type is now defined in asn1-1.4.4.2 and
            later.  Therefore the definitions of UTF8String has been
            removed from the ASN.1 modules PKIX1Explicit88.asn1 and
            PKIXAttributeCertificate.asn1. The SSL application can now
            only be built using asn-1.4.4.2 or later.</p>
          <p>OwnId: OTP-4971.</p>
        </item>
      </list>
    </section>

    <section>
      <title>Known Bugs and Problems</title>
      <p>See SSL-3.0.
        </p>
    </section>
  </section>

  <section>
    <title>SSL 3.0.1</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>An unexpected object identifier would crash <c>ssl:peercert</c>. </p>
          <p>OwnId: OTP-4771.</p>
        </item>
      </list>
    </section>

    <section>
      <title>Known Bugs and Problems</title>
      <p>See SSL-3.0.
        </p>
    </section>
  </section>

  <section>
    <title>SSL 3.0</title>

    <section>
      <title>Improvements and New Features</title>
      <list type="bulleted">
        <item>
          <p>The <c>cache_timout</c> option was silently ignored. It had 
            to do with SSL sessions, where multiple connections can occur.
            Since the Erlang SSL application does not support sessions the
            option is still ignored, and consequently  the documentation 
            about it has been removed.</p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>The Erlang SSL application is now based on OpenSSL version
            0.9.7a. OpenSSL 0.9.6 should also work.</p>
          <p>OwnId: OTP-4002</p>
        </item>
        <item>
          <p>When connecting it is now possible to bind to a local address
            and local port. </p>
          <p>OwnId: OTP-4675</p>
        </item>
        <item>
          <p>The <c>ssl_esock</c> port program is now part of the
            distribution and thus does not have to be created
            explicitly.  It is dynamically linked to OpenSSL
            libraries in a "standard" location (typically
            <c>/usr/local/lib</c> on UNIX; in the path on Win32).</p>
          <p>OwnId:
            OTP-4676</p>
        </item>
        <item>
          <p>The new functions <c>ssl:peercert/1/2</c> provide information
            from the certificate of a peer of a connection.</p>
          <p>OwnId: OTP-4680 
                        <br></br>
Aux Id: seq7688</p>
        </item>
        <item>
          <p>The function <c>ssl:port/1</c> has been removed from the 
            documentation, but not from the <c>ssl</c> interface module. 
            The recommendation is to use <c>ssl:peername/1</c>
            instead, which provides both address and port of the peer.</p>
          <p>OwnId: OTP-4681 </p>
        </item>
        <item>
          <p>New User's Guide documentation has been added.</p>
          <p>OwnId: OTP-4682 </p>
        </item>
        <item>
          <p>The old <c>ssl_socket</c> interface has been removed and also
            the documentation of it. </p>
          <p>OwnId: OTP-4683 </p>
        </item>
        <item>
          <p>The use of ephemeral RSA keys is now supported. It is
            a global configuration option (see the ssl(6) manual page).</p>
          <p>OwnId: OTP-4691.</p>
        </item>
      </list>
    </section>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>The option <c>cacertfile</c> is now in effect, and can
            therefore no longer be set with the OS environment
            variable SSL_CERT_FILE (which did set the same value for
            all connections).  </p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>There was a synchronization error at closing of an SSL 
            connection. </p>
          <p>OwnId: OTP-4435
                        <br></br>
Aux Id: seq7534</p>
        </item>
        <item>
          <p>C macros in <c>debuglog.c</c> were not ANSI C compliant.</p>
          <p>OwnId: OTP-4674</p>
        </item>
        <item>
          <p>The <c>binary</c> option was not properly handled.</p>
          <p>OwnId: OTP-4678</p>
        </item>
        <item>
          <p>The <c>ssl:format_error/1</c> did not consider <c>inet</c>
            error codes, nor did it have a catch all for unknown error
            codes.</p>
          <p>OwnId: OTP-4679</p>
        </item>
      </list>
    </section>

    <section>
      <title>Known Bugs and Problems</title>
      <list type="bulleted">
        <item>
          <p>Change of controlling process in not OTP compliant. </p>
          <p>OwnId; OTP-4712</p>
        </item>
        <item>
          <p>There is still no way to restrict the cipher sizes. </p>
          <p>OwnId: OTP-4712</p>
        </item>
        <item>
          <p>The <c>keep_alive</c> and <c>reuse_addr</c> options will be
            added in a future release.  </p>
          <p>OwnId: OTP-4677</p>
        </item>
        <item>
          <p>There is currently no way to restrict the SSL/TLS
            protocol versions to use. In a future release this will be
            supported as a configuration option, and as an option for
            each connection as well.  </p>
          <p>OwnId: OTP-4711.</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 2.3.6</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>There was a synchronization error at closing, which could 
            result in that an SSL socket was removed prematurely, resulting
            in that a user process referring to it received an unexpected
            exit.</p>
          <p>OwnId: OTP-4435
                        <br></br>
Aux Id: seq7600</p>
        </item>
      </list>
    </section>

    <section>
      <title>Known Bugs and Problems</title>
      <p>See SSL 2.2 .  </p>
    </section>
  </section>

  <section>
    <title>SSL 2.3.5</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>Setting of the option `nodelay' caused the SSL port program
            to dump core.</p>
          <p>OwnId: OTP-4380
                        <br></br>
Aux Id: -</p>
        </item>
        <item>
          <p>Setting of the option '{active, once}' in <c>setopts</c> was 
            wrong, causing a correct socket message to be regarded as
            erroneous. </p>
          <p>OwnId: OTP-4380 
                        <br></br>
Aux Id: -</p>
        </item>
        <item>
          <p>A self-signed peer certificate was always rejected with the
            error `eselfsignedcert', irrespective of the `depth' value. </p>
          <p>OwnId: OTP-4374
                        <br></br>
Aux Id: seq7417</p>
        </item>
      </list>
    </section>

    <section>
      <title>Known Bugs and Problems</title>
      <p>See SSL 2.2 .  </p>
    </section>
  </section>

  <section>
    <title>SSL 2.3.4</title>

    <section>
      <title>Improvements and New Features</title>
      <list type="bulleted">
        <item>
          <p>All TCP options allowed in gen_tcp, are now also allowed in
            SSL, except the option <c>{reuseaddr, Boolean}</c>. A new
            function <c>getopts</c> has been added to the SSL interface
            module <c>ssl</c>. </p>
          <p>OwnId: OTP-4305, OTP-4159</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 2.3.3</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>The roles of the SSLeay and OpenSSL packages has been
            clarified in the ssl(6) application manual page. Also
            the URLs from which to download SSLeay has been updated.</p>
          <p>OwnId: OTP-4002
                        <br></br>
Aux Id: seq5269</p>
        </item>
        <item>
          <p>A call to <c>ssl:listen(Port, Options)</c> with
            <c>Options = []</c> resulted in the cryptic <c>{error, ebadf}</c> return value. The return value has been changed
            to <c>{error, enooptions}</c>, and the behaviour has been
            documented in the <c>listen/2</c> function.</p>
          <p>OwnId: OTP-4016 
                        <br></br>
Aux Id: seq7006</p>
        </item>
        <item>
          <p>Use of the option <c>{nodelay, boolean()}</c> crashed
            the <c>ssl_server</c>.</p>
          <p>OwnId: OTP-4070
                        <br></br>
Aux Id:</p>
        </item>
        <item>
          <p>A bug caused the Erlang distribution over ssl to fail.
            This bug has now been fixed.</p>
          <p>OwnId: OTP-4072
                        <br></br>
Aux Id:</p>
        </item>
        <item>
          <p>On Windows when the SSL port program encountered an
            error code not anticipated it crashed.  </p>
          <p>OwnId: OTP-4132
                        <br></br>
Aux Id:</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 2.3.2</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>The <c>ssl:accept/1-2</c> function sometimes returned
            <c>{error, {What, Where}}</c> instead of <c>{error, What}</c>, where <c>What</c> is an atom.  </p>
          <p>OwnId: OTP-3775
                        <br></br>
Aux Id: seq4991</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 2.3.1</title>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>Sometimes the SSL portprogram would loop in an accept
            loop, without terminating even when the SSL application
            was stopped..  </p>
          <p>OwnId: OTP-3691</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 2.3</title>
    <p>Functions have been added to SSL to experimentally support 
      Erlang distribution.
      </p>
  </section>

  <section>
    <title>SSL 2.2.1</title>
    <p>The 2.2.1 version of SSL provides code replacement in runtime
      by upgrading from, or downgrading to, versions 2.1 and 2.2.
      </p>
  </section>

  <section>
    <title>SSL 2.2</title>

    <section>
      <title>Improvements and New Features</title>
      <list type="bulleted">
        <item>
          <p>The restriction that only the creator of an SSL socket can
            read from and write to the socket has been lifted.</p>
          <p>OwnId: OTP-3301</p>
        </item>
        <item>
          <p>The option <c>{packet, cdr}</c> for SSL sockets has been added,
            which means that SSL sockets also supports CDR encoded packets.</p>
          <p>OwnId: OTP-3302</p>
        </item>
      </list>
    </section>

    <section>
      <title>Known Bugs and Problems</title>
      <list type="bulleted">
        <item>
          <p>Setting of a CA certificate file with the <c>cacertfile</c>
            option (in calls to <c>ssl:accept/1/2</c> or 
            <c>ssl:connect/3/4</c>) does not work due to weaknesses
            in the SSLeay package. </p>
          <p>A work-around is to set the OS environment variable
            <c>SSL_CERT_FILE</c> before SSL is started. However, then
            the CA certificate file will be global for all connections.</p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>When changing controlling process of an SSL socket, a 
            temporary process is started, which is not gen_server
            compliant.</p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>Although there is a <c>cache</c> timeout option, it is
            silently ignored.</p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>There is currently no way to restrict the cipher sizes.</p>
          <p>OwnId: OTP-3146</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 2.1</title>

    <section>
      <title>Improvements and New Features</title>
      <list type="bulleted">
        <item>
          <p>The set of possible error reasons has been extended to
            contain diagnostics on erroneous certificates and failures
            to verify certificates.</p>
          <p>OwnId: OTP-3145</p>
        </item>
        <item>
          <p>The maximum number of simultaneous SSL connections on
            Windows has been increased from 31 to 127.</p>
          <p>OwnId: OTP-3145</p>
        </item>
      </list>
    </section>

    <section>
      <title>Fixed Bugs and Malfunctions</title>
      <list type="bulleted">
        <item>
          <p>A dead-lock occurring when write queues are not empty has 
            been removed.  </p>
          <p>OwnId: OTP-3145</p>
        </item>
        <item>
          <p>Error reasons have been unified and changed.</p>
          <p>(** POTENTIAL INCOMPATIBILITY **)</p>
          <p>OwnId: OTP-3145</p>
        </item>
        <item>
          <p>On Windows a check of the existence of the environment
            variable <c>ERLSRV_SERVICE_NAME</c> has been added. If
            that variable is defined, the port program of the SSL
            application will not terminated when a user logs off.</p>
          <p>OwnId: OTP-3145</p>
        </item>
        <item>
          <p>An error in the setting of the <c>nodelay</c> option 
            has been corrected.</p>
          <p>OwnId: OTP-3145</p>
        </item>
        <item>
          <p>The confounded notions of verify mode and verify depth has
            been corrected. The option <c>verifydepth</c> has been 
            removed, and the two separate options <c>verify</c> and
            <c>depth</c> has been added.</p>
          <p>(** POTENTIAL INCOMPATIBILITY **)</p>
          <p>OwnId: OTP-3145</p>
        </item>
      </list>
    </section>

    <section>
      <title>Known Bugs and Problems</title>
      <list type="bulleted">
        <item>
          <p>Setting of a CA certificate file with the <c>cacertfile</c>
            option (in calls to <c>ssl:accept/1/2</c> or 
            <c>ssl:connect/3/4</c>) does not work due to weaknesses
            in the SSLeay package. </p>
          <p>A work-around is to set the OS environment variable
            <c>SSL_CERT_FILE</c> before SSL is started. However, then
            the CA certificate file will be global for all connections.</p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>When changing controlling process of an SSL socket, a 
            temporary process is started, which is not gen_server
            compliant.</p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>Although there is a <c>cache</c> timeout option, it is
            silently ignored.</p>
          <p>OwnId: OTP-3146</p>
        </item>
        <item>
          <p>There is currently no way to restrict the cipher sizes.</p>
          <p>OwnId: OTP-3146</p>
        </item>
      </list>
    </section>
  </section>

  <section>
    <title>SSL 2.0</title>
    <p>A complete new version of SSL with separate I/O channels
      for all connections with non-blocking I/O multiplexing.</p>
  </section>
</chapter>