<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">
<chapter>
<header>
<copyright>
<year>2004</year><year>2013</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
</legalnotice>
<title>APPLICATION Release Notes</title>
<prepared>Peter Andersson</prepared>
<responsible>Peter Andersson</responsible>
<docno></docno>
<approved></approved>
<checked></checked>
<date>2007-11-30</date>
<rev>A</rev>
<file>notes.xml</file>
</header>
<section><title>Test_Server 3.6.1</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
The unicode update of test_server for R16A introduced a
few potential errors when logging to files. Sometimes ~tp
or ~ts was used for formatting also when writing to files
that were not opened with the {encoding,utf8} option. If
then the argument contained unicode characters above 255,
the file descriptor would crash. This has been corrected
by the following modifications: <list> <item> Since the
'unexpected_io' log file is used only when the test case
HTML file is not available (e.g. between test cases),
this file is now also a HTML file and as other
test_server HTML logs it is always UTF-8 encoded </item>
<item> Since it is possible to change which information
is going to which log file (with
test_server_ctrl:set_levels/3), we do not have full
control over which information is written to which file.
This means that any printout could be written to the
'major' log file (suite.log), which was earlier encoded
as latin1. To avoid crashing this file descriptor due to
unicode strings, the 'major' log file is now also encoded
in UTF-8 (possible incopatibility). </item> <item> The
cross_cover.info file is no longer a text file which can
be read with file:consult/1, instead it is written as a
pure binary file using term_to_binary when writing and
binary_to_term when reading. </item> <item> The encoding
of the file named 'last_name', which only content is the
path to the last run.<timestamp> directory, is now
dependent on the file name mode of the VM. If file names
are expected to be unicode, then the 'last_name' file is
UTF-8 encoded, else it is latin1 encoded. </item> </list></p>
<p>
Also, ~tp has been changed back to ~p unless it is
somehow likely that the argument includes strings. It is
not obvious that this is the correct thing to do, but
some decission had to be taken...</p>
<p>
Own Id: OTP-10780</p>
</item>
<item>
<p>
Using the force_stop flag/option to interrupt a test run
caused a crash in Common Test. This problem has been
solved.</p>
<p>
Own Id: OTP-10832</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.6</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
Line numbering of erlang files that were not correctly
indented could be wrong after coverting to html with
erl2html2:convert/[2,3] (the source code pointed to from
the test case). This has been corrected.</p>
<p>
Also, there are now link targets for each line and not
only for each 10th line, and link targets for functions
now include the arity and not only the function name
(e.g. func/1 has a link target "func-1").</p>
<p>
Own Id: OTP-9710 Aux Id: seq11945, kunagi-201 [112] </p>
</item>
<item>
<p>
Severe errors detected by <c>test_server</c> (e.g. if log
files directories cannot be created) will now be reported
to <c>common_test</c> and noted in the <c>common_test</c>
logs.</p>
<p>
Own Id: OTP-9769 Aux Id: kunagi-202 [113] </p>
</item>
<item>
<p>
The earlier undocumented cross cover feature for
accumulating cover data over multiple tests has now been
fixed and documented.</p>
<p>
Own Id: OTP-9870 Aux Id: kunagi-206 [117] </p>
</item>
<item>
<p>
If the test suite itself was included in code coverage
analysis, then the test_server would not manage to set
data_dir correctly for the test. This has been corrected.</p>
<p>
Own Id: OTP-9956 Aux Id: kunagi-207 [118] </p>
</item>
<item>
<p>
Any call to test_server:break/1 should cancel all active
timetramps. However, in some cases
Suite:end_per_testcase/2 is executed on a different
process than the test case itself, and if
test_server:break/1 was called from there, the timetraps
were not cancelled. This has been corrected.</p>
<p>
Own Id: OTP-10046 Aux Id: kunagi-174 [85] </p>
</item>
<item>
<p>When a test case failed because of a timetrap time
out, the <c>Config</c> data for the case was lost in the
following call to <c>end_per_testcase/2</c>, and also in
calls to the CT Hook function
<c>post_end_per_testcase/4</c>. This problem has been
solved and the <c>Config</c> data is now correctly passed
to the above functions after a timetrap timeout
failure.</p>
<p>
Own Id: OTP-10070 Aux Id: kunagi-175 [86] </p>
</item>
<item>
<p>In test_server, the same process would supervise the
currently running test case and be group leader (and IO
server) for the test case. Furthermore, when running
parallel test cases, new temporary supervisor/group
leader processes were spawned and the process that was
group leader for sequential test cases would not be
active. That would lead to several problems:</p>
<p>* Processes started by init_per_suite will inherit the
group leader of the init_per_suite process (and that
group leader would not process IO requests when parallel
test cases was running). If later a parallel test case
caused such a processto print using (for example)
io:format/2, the calling would hang.</p>
<p>* Similarly, if a process was spawned from a parallel
test case, it would inherit the temporary group leader
for that parallel test case. If that spawned process
later - when the group of parallel tests have finished -
attempted to print something, its group leader would be
dead and there would be <c>badarg</c> exception.</p>
<p>Those problems have been solved by having group
leaders separate from the processes that supervises the
test cases, and keeping temporary group leader process
for parallel test cases alive until no more process in
the system use them as group leaders.</p>
<p>Also, a new <c>unexpected_io.log</c> log file
(reachable from the summary page of each test suite) has
been introduced. All unexpected IO will be printed into
it(for example, IO to a group leader for a parallel test
case that has finished).</p>
<p>
Own Id: OTP-10101 Aux Id: OTP-10125 </p>
</item>
<item>
<p>
The stability of <c>common_test</c> and
<c>test_server</c> when running test cases in parallel
has been improved.</p>
<p>
Own Id: OTP-10480 Aux Id: kunagi-318 [229] </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Added a general framework for executing benchmarks of
Erlang/OTP. Benchmarks for the Erlang VM and mnesia have
been incorporated in the framework. </p>
<p>
For details about how to add more benchmarks see
$ERL_TOP/HOWTO/BENCHMARKS.md in the source distribution.</p>
<p>
Own Id: OTP-10156</p>
</item>
<item>
<p>
Update common test modules to handle unicode <list>
<item> Use UTF-8 encoding for all HTML files, except the
HTML version of the test suite generated with
erl2html2:convert, which will have the same encoding as
the original test suite (.erl) file. </item> <item>
Encode link targets in HTML files with
test_server_ctrl:uri_encode/1. </item> <item> Use unicode
modifier 't' with ~s when appropriate. </item> <item> Use
unicode:characters_to_list and
unicode:characters_to_binary for conversion between
binaries and strings instead of binary_to_list and
list_to_binary. </item> </list></p>
<p>
Own Id: OTP-10783</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.5.3</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
test_server_h will now recognize info_reports written by
ct connection handlers (according to the description in
cth_conn_log) and ignore them as they will be completely
handled by by ct_conn_log_h.</p>
<p>
Earlier test_server_h would print a tag (testcase name)
before forwarding the report to error_logger_tty_h. This
would cause lots of tags in the log with no info report
following (since error_logger_tty_h did not handle them).</p>
<p>
Own Id: OTP-10571</p>
</item>
</list>
</section>
<section><title>Known Bugs and Problems</title>
<list>
<item>
<p>
Restore Config data if lost when test case fails.</p>
<p>
Own Id: OTP-10070 Aux Id: kunagi-175 [86] </p>
</item>
<item>
<p>
IO server error in test_server.</p>
<p>
Own Id: OTP-10125 Aux Id: OTP-10101, kunagi-177 [88] </p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.5.2</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
The documentation has been updated with the latest
changes for the test_server_ctrl:report/2 function.</p>
<p>
Own Id: OTP-10086 Aux Id: seq12066 </p>
</item>
<item>
<p>
The ct:get_status/0 function failed to report status if a
parallel test case group was running at the time of the
call. This has been fixed and the return value for the
function has been updated. Please see the ct reference
manual for details.</p>
<p>
Own Id: OTP-10172</p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
It is now possible to sort the HTML tables by clicking on
the header elements. In order to reset a sorted table,
the browser window should simply be refreshed. This
feature requires that the browser supports javascript,
and has javascript execution enabled. If the 'ct_run
-basic_html' flag is used, no javascript code is included
in the generated HTML code.</p>
<p>
Own Id: OTP-9896 Aux Id: seq12034, OTP-9835 </p>
</item>
<item>
<p>
Verbosity levels for log printouts has been added. This
makes it possible to specify preferred verbosity for
different categories of log printouts, as well as general
printouts (such as standard IO), to allow control over
which strings get printed and which get ignored. New
versions of the Common Test logging functions, ct:log,
ct:pal and ct:print, have been introduced, with a new
Importance argument added. The Importance value is
compared to the verbosity level at runtime. More
information can be found in the chapter about Logging in
the Common Test User's Guide.</p>
<p>
Own Id: OTP-10067 Aux Id: seq12050 </p>
</item>
<item>
<p>
The Erlang/OTP test runner ts has been extended to allow
cross compilation of test suites. To cross compile the
test suites first follow the normal cross compilation
procedures and release the tests on the build host. Then
install ts using an xcomp specification file and compile
test suites using ts:compile_testcases/0. For more
details see $ERL_TOP/xcomp/README.md.</p>
<p>
Own Id: OTP-10074</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.5.1</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
After a test case timeout or abortion, the
end_per_testcase function executes on a new dedicated
process. The group leader for this process should be set
to the IO server for the test case, which was not done
properly. The result of this error was that no warnings
about end_per_testcase failing or timing out were ever
printed in the test case log. Also, help functions such
as e.g. test_server:stop_node/1, attempting to
synchronize with the IO server, would hang. The fault has
been corrected.</p>
<p>
Own Id: OTP-9666</p>
</item>
<item>
<p>
A deadlock situation could occur if Common Test is
forwarding error_handler printouts to Test Server at the
same time a new test case is starting. This error has
been fixed.</p>
<p>
Own Id: OTP-9894</p>
</item>
<item>
<p>
When a test case was killed because of a timetrap
timeout, the current location (suite, case and line) was
not printed correctly in the log files. This has been
corrected.</p>
<p>
Own Id: OTP-9930 Aux Id: seq12002 </p>
</item>
<item>
<p>
Test Server and Common Test would add new error handlers
with each test run and fail to remove previously added
ones. In the case of Test Server, this would only happen
if SASL was not running on the test node. This has been
fixed.</p>
<p>
Own Id: OTP-9941 Aux Id: seq12009 </p>
</item>
<item>
<p>
If a test case process was terminated due to an exit
signal from a linked process, Test Server failed to
report the correct name of the suite and case to the
framework. This has been corrected.</p>
<p>
Own Id: OTP-9958 Aux Id: OTP-9855 </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
A new optional feature has been introduced that enables
Common Test to generate priv_dir directory names that are
unique for each test case or config function. The name of
the option/flag is 'create_priv_dir' and it can be set to
value 'auto_per_run' (which is the default, existing,
behaviour), or 'auto_per_tc' or 'manual_per_tc'. If
'auto_per_tc' is used, Test Server creates a dedicated
priv_dir automatically for each test case (which can be
very expensive in case of many and/or repeated cases). If
'manual_per_tc' is used, the user needs to create the
priv_dir explicitly by calling the new function
ct:make_priv_dir/0.</p>
<p>
Own Id: OTP-9659 Aux Id: seq11930 </p>
</item>
<item>
<p>
A column for test case group name has been added to the
suite overview HTML log file.</p>
<p>
Own Id: OTP-9730 Aux Id: seq11952 </p>
</item>
<item>
<p>
It is now possible to use the post_end_per_testcase CT
hook function to print a comment for a test case in the
overview log file, even if the test case gets killed by a
timetrap or unknown exit signal, or if the
end_per_testcase function times out.</p>
<p>
Own Id: OTP-9855 Aux Id: seq11979 </p>
</item>
<item>
<p>
Common Test will now print error information (with a time
stamp) in the test case log file immediately when a test
case fails. This makes it easier to see when, in time,
the fault actually occured, and aid the job of locating
relevant trace and debug printouts in the log.</p>
<p>
Own Id: OTP-9904 Aux Id: seq11985, OTP-9900 </p>
</item>
<item>
<p>
Test Server has been modified to check the SASL
errlog_type parameter when receiving an error logger
event, so that it doesn't print reports of type that the
user has disabled.</p>
<p>
Own Id: OTP-9955 Aux Id: seq12013 </p>
</item>
<item>
<p>
If an application cannot be found by ts it is
automatically skipped when testing.</p>
<p>
Own Id: OTP-9971</p>
</item>
<item>
<p>
By specifying a user defined function ({M,F,A} or fun) as
timetrap value, either by means of an info function or by
calling ct:timetrap/1, it is now possible to set a
timetrap that will be triggered when the user function
returns.</p>
<p>
Own Id: OTP-9988 Aux Id: OTP-9501, seq11894 </p>
</item>
<item>
<p>
If the optional configuration functions init_per_suite/1
and end_per_suite/1 are not implemented in the test
suite, local Common Test versions of these functions are
called instead, and will be displayed in the overview log
file. Any printouts made by the pre- or
post_init_per_suite and pre- or post_end_per_suite hook
functions are saved in the log files for these functions.</p>
<p>
Own Id: OTP-9992</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.5</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
The test case group info function has been implemented in
Common Test. Before execution of a test case group, a
call is now made to <c>TestSuite:group(GroupName)</c>.
The function returns a list of test properties, e.g. to
specify timetrap values, require configuration data, etc
(analogue to the test suite- and test case info
function). The scope of the properties set by
<c>group(GroupName)</c> is all test cases and sub-groups
of group <c>GroupName</c>.</p>
<p>
Own Id: OTP-9235</p>
</item>
<item>
<p>
The look of the HTML log files generated by Common Test
and Test Server has been improved (and made easier to
customize) by means of a CSS file.</p>
<p>
Own Id: OTP-9706</p>
</item>
</list>
</section>
<section><title>Known Bugs and Problems</title>
<list>
<item>
<p>
Fix problems in CT/TS due to line numbers in exceptions.</p>
<p>
Own Id: OTP-9203</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.4.5</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
An error in how comments are colored in the test suite
overview html log file has been corrected. As result, a
new framework callback function, format_comment/1, has
been introduced.</p>
<p>
Own Id: OTP-9237</p>
</item>
<item>
<p>
Test Server did not release SASL TTY handlers
(sasl_report_tty_h and error_logger_tty_h) properly after
each test run. This error has been fixed.</p>
<p>
Own Id: OTP-9311</p>
</item>
<item>
<p>
Automatically generated init- and end-configuration
functions for test case groups caused incorrect execution
order of test cases. This has been corrected.</p>
<p>
Own Id: OTP-9369</p>
</item>
<item>
<p>
If ct:log/2 was called with bad arguments, this could
cause the Common Test IO handling process to crash. This
fault has been corrected.</p>
<p>
Own Id: OTP-9371 Aux Id: OTP-8933 </p>
</item>
<item>
<p>
A bug has been fixed that made Test Server call the
end_tc/3 framework function with an incorrect module name
as first argument.</p>
<p>
Own Id: OTP-9379 Aux Id: seq11863 </p>
</item>
<item>
<p>
If end_per_testcase caused a timetrap timeout, the actual
test case status was discarded and the test case logged
as successful (even if the case had actually failed
before the call to end_per_testcase). This fault has been
fixed.</p>
<p>
Own Id: OTP-9397</p>
</item>
<item>
<p>
If a timetrap timeout occured during execution of of a
function in a lib module (i.e. a function called directly
or indirectly from a test case), the Suite argument in
the end_tc/3 framework callback function would not
correctly contain the name of the test suite, but the lib
module. (This would only happen if the lib module was
compiled with ct.hrl included). This error has been
solved.</p>
<p>
Own Id: OTP-9398</p>
</item>
<item>
<p>
Add a proplist() type</p>
<p>
Recently I was adding specs to an API and found that
there is no canonical proplist() type defined. (Thanks to
Ryan Zezeski)</p>
<p>
Own Id: OTP-9499</p>
</item>
<item>
<p> XML files have been corrected. </p>
<p>
Own Id: OTP-9550 Aux Id: OTP-9541 </p>
</item>
<item>
<p>
If a test suite would start with a test case group
defined without the init_per_group/2 and end_per_group/2
function, init_per_suite/1 would not execute initially
and logging of the test run would fail. This error has
been fixed.</p>
<p>
Own Id: OTP-9584</p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
A new option, 'logopts', has been introduced, to make it
possible to modify some aspects of the logging behaviour
in Common Test (or Test Server). For example, whenever an
io printout is made, test_server adds newline (\n) to the
end of the output string. This may not always be a
preferred action and can therefore be disabled by means
of "ct_run ... -logopts no_nl" (or ct:run_test([...,
{logopts,[no_nl]}])). A new framework callback function,
get_logopts/0, has been introduced (see the ct_framework
module for details).</p>
<p>
Own Id: OTP-9372 Aux Id: OTP-9396 </p>
</item>
<item>
<p>
A new option, 'logopts', has been introduced, to make it
possible to modify some aspects of the logging behaviour
in Common Test (or Test Server). For example, if the html
version of the test suite source code should not be
generated during the test run (and consequently be
unavailable in the log file system), the feature may be
disabled by means of "ct_run ... -logopts no_src" (or
ct:run_test([..., {logopts,[no_src]}])). A new framework
callback function, get_logopts/0, has been introduced
(see the ct_framework module for details).</p>
<p>
Own Id: OTP-9396 Aux Id: seq11869, OTP-9372 </p>
</item>
<item>
<p>
It is now possible to use a tuple {M,F,A}, or a fun, as
timetrap specification in the suite info function or test
case info functions. The function must return a valid
timeout value, as documented in the common_test man page
and in the User's Guide.</p>
<p>
Own Id: OTP-9501 Aux Id: seq11894 </p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.4.4</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
It was previously not possible to use timetrap value
'infinity' with ct:timetrap/1. This has been fixed.</p>
<p>
Own Id: OTP-9159</p>
</item>
<item>
<p>
A bug that made it impossible to cancel the previous
timetrap when calling ct:timetrap/1 has been corrected.</p>
<p>
Own Id: OTP-9233 Aux Id: OTP-9159 </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
When running tests with auto-compilation disabled, Common
Test could only display the test suite source code on
html format in the test case log if the source file was
located in the same directory as the pre-compiled suite.
This has been modified so that Common Test now tries to
locate the source file by means of the test suite module
info (Suite:module_info/1). As a result, a suite may now
be compiled to a different output directory (e.g.
$MYTEST/bin) than the source code directory (e.g.
$MYTEST/src), without the source-code-to-html generation
being affected.</p>
<p>
Own Id: OTP-9138</p>
</item>
<item>
<p>
It is now possible to return a tuple {fail,Reason} from
init_per_testcase/2. The result is that the associated
test case gets logged as failed without ever executing.</p>
<p>
Own Id: OTP-9160 Aux Id: seq11502 </p>
</item>
<item>
<p>
Added DragonflyBSD check in test_server configure.</p>
<p>
Own Id: OTP-9249</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.4.3</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
Updated the ts*.config files to contain information
relevant to testing Erlang/OTP in an open source
environment.</p>
<p>
Own Id: OTP-9017</p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Alpha release of Common Test Hooks (CTH). CTHs allow the
users of common test to abtract out common behaviours
from test suites in a much more elegant and flexible way
than was possible before. Note that the addition of this
feature may introduce minor changes in the undocumented
behaviour of the interface inbetween common_test and
test_server.</p>
<p>
*** POTENTIAL INCOMPATIBILITY ***</p>
<p>
Own Id: OTP-8851</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.4.2</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>Miscellaneous updates</p>
<p>
Own Id: OTP-8976</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.4.1</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
Returning {return_group_result,failed} from end_per_group
in a group that is part of a sequence, did not cause the
proceeding cases (or groups) to get skipped. This has
been fixed.</p>
<p>
Own Id: OTP-8753 Aux Id: seq11644 </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Common Test has been updated to handle start options and
test specification terms for test case groups (and test
cases in groups). Also, an option named 'label', has been
added that associates the test run with a name that
Common Test prints in the overview HTML logs.</p>
<p>
Own Id: OTP-8725 Aux Id: OTP-8727 </p>
</item>
<item>
<p>
It is now possible to skip all tests in a suite, or a
group, by returning {fail,Reason} from the end_tc/5
framework function for init_per_suite, or init_per_group.</p>
<p>
Own Id: OTP-8805 Aux Id: seq11664 </p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.4</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
Returning {fail,Reason} from the framework end_tc
function was not handled properly by Test Server for all
test suite functions.</p>
<p>
Own Id: OTP-8492 Aux Id: seq11502 </p>
</item>
<item>
<p>
If the framework end_tc function would hang and get
aborted by Test Server, there was no indication of
failure in the logs. This has been fixed.</p>
<p>
Own Id: OTP-8682 Aux Id: seq11504 </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
It is now possible for the Test Server framework end_tc
function to change the status of the test case from ok or
auto-skipped to failed by returning {fail,Reason}.</p>
<p>
Own Id: OTP-8495 Aux Id: seq11502 </p>
</item>
<item>
<p>
Test Server will now call the end_per_testcase/2 function
even if the test case has been terminated explicitly
(with abort_current_testcase/1), or after a timetrap
timeout. Under these circumstances the return value of
end_per_testcase is completely ignored. Therefore the
function will not be able to change the reason for test
case termination by returning {fail,Reason}, nor will it
be able to save data with {save_config,Data}.</p>
<p>
Own Id: OTP-8500 Aux Id: seq11521 </p>
</item>
<item>
<p>
Previously, a repeat property of a test case group
specified the number of times the group should be
repeated after the main test run. I.e. {repeat,N} would
case the group to execute 1+N times. To be consistent
with the behaviour of the run_test repeat option, this
has been changed. N now specifies the absolute number of
executions instead.</p>
<p>
Own Id: OTP-8689 Aux Id: seq11502 </p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.3.6</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
The Test Server parse transform did not handle bit string
comprehensions. This has been fixed.</p>
<p>
Own Id: OTP-8458 Aux Id: OTP-8311 </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
The tc_status value in the Config list for a test case
that has failed because of a timetrap timeout, has
changed from {tc_status,timeout} to
{tc_status,timetrap_timeout}.</p>
<p>
Own Id: OTP-8302</p>
</item>
<item>
<p>The documentation is now possible to build in an open
source environment after a number of bugs are fixed and
some features are added in the documentation build
process. </p>
<p>- The arity calculation is updated.</p>
<p>- The module prefix used in the function names for
bif's are removed in the generated links so the links
will look like
"http://www.erlang.org/doc/man/erlang.html#append_element-2"
instead of
"http://www.erlang.org/doc/man/erlang.html#erlang:append_element-2".</p>
<p>- Enhanced the menu positioning in the html
documentation when a new page is loaded.</p>
<p>- A number of corrections in the generation of man
pages (thanks to Sergei Golovan)</p>
<p>- The legal notice is taken from the xml book file so
OTP's build process can be used for non OTP
applications.</p>
<p>
Own Id: OTP-8343</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.3.5</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
If the init_per_testcase/2 function fails, the test case
now gets marked and counted as auto skipped, not user
skipped (which would previously happen).</p>
<p>
Own Id: OTP-8289</p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
The documentation is now built with open source tools
(xsltproc and fop) that exists on most platforms. One
visible change is that the frames are removed.</p>
<p>
Own Id: OTP-8201</p>
</item>
<item>
<p>
It is now possible to fail a test case from the
end_per_testcase/2 function, by returning {fail,Reason}.</p>
<p>
Own Id: OTP-8284</p>
</item>
<item>
<p>
It is now possible to fail a test case by having the
end_tc/3 framework function return {fail,Reason} for the
test case.</p>
<p>
Own Id: OTP-8285</p>
</item>
<item>
<p>
The test_server framework API (e.g. the end_tc/3
function) has been modified. See the test_server_ctrl
documentation for details.</p>
<p>
Own Id: OTP-8286 Aux Id: OTP-8285, OTP-8287 </p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.3.4</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
When running a suite starting with a test case group,
Test Server crashed if init_per_suite/1 exited or
returned skip. This has been fixed.</p>
<p>
Own Id: OTP-8105 Aux Id: OTP-8089 </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Various updates and fixes in Common Test and Test Server.</p>
<p>
Own Id: OTP-8045 Aux Id: OTP-8089,OTP-8105,OTP-8163 </p>
</item>
<item>
<p>
Errors in coverage data collection and analysis were
difficult to detect. The logging has been improved so
that more information about e.g. imported and missing
modules is printed to the html log files.</p>
<p>
Own Id: OTP-8163 Aux Id: seq11374 </p>
</item>
<item>
<p>
The Common Test HTML overview pages have been improved.
It is now possible to see if a test case has been skipped
explicitly or because a configuration function has
failed. Also, the history page (all_runs.html) now has
scrolling text displaying the test names. The old format
(showing names as a truncated string) can still be
generated by means of the flag/option 'basic_html'.</p>
<p>
Own Id: OTP-8177</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.3.2</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Various corrections and improvements of Common Test and
Test Server.</p>
<p>
Own Id: OTP-7981</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.3.1</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Minor updates and corrections.</p>
<p>
Own Id: OTP-7897</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.3</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
The conf case in Test Server has been extended with
properties that make it possible to execute test cases in
parallel, in sequence and in shuffled order. It is now
also possible to repeat test cases according to different
criterias. The properties can be combined, making it
possible to e.g. repeat a conf case a certain number of
times and execute the test cases in different (random)
order every time. The properties are specified in a list
in the conf case definition: {conf, Properties, InitCase,
TestCases, EndCase}. The available properties are:
parallel, sequence, shuffle, repeat, repeat_until_all_ok,
repeat_until_any_ok, repeat_until_any_fail,
repeat_until_all_fail.</p>
<p>
Own Id: OTP-7511 Aux Id: OTP-7839 </p>
</item>
<item>
<p>The test server starts Cover on nodes of the same
version as the test server itself only.</p>
<p>
Own Id: OTP-7699</p>
</item>
<item>
<p>
The Erlang mode for Emacs has been updated with new and
modified skeletons for Common Test and TS. Syntax for
test case groups in Common Test (and conf cases with
properties in TS) has been added and a new minimal Common
Test suite skeleton has been introduced.</p>
<p>
Own Id: OTP-7856</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.2.4.1</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
The step functionality in Common Test (based on
interaction with Debugger) was broken. This has been
fixed, and some new step features have also been added.
Please see the Common Test User's Guide for details.</p>
<p>
Own Id: OTP-7800 Aux Id: seq11106 </p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.2.4</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Miscellaneous updates.</p>
<p>
Own Id: OTP-7527</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.2.3</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
When a testcase terminated due to a timetrap, io sent to
the group leader from framework:end_tc/3 (using
ct:pal/2/3 or ct:log/2/3) would cause deadlock. This has
been fixed.</p>
<p>
Own Id: OTP-7447 Aux Id: seq11010 </p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Various updates and improvements, plus some minor bug
fixes, have been implemented in Common Test and Test
Server.</p>
<p>
Own Id: OTP-7112</p>
</item>
<item>
<p>
It is now possible, by means of the new function
ct:abort_current_testcase/1 or
test_server_ctrl:abort_current_testcase/1, to abort the
currently executing test case.</p>
<p>
Own Id: OTP-7518 Aux Id: OTP-7112 </p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.2.2</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p><c>erlang:system_info/1</c> now accepts the
<c>logical_processors</c>, and <c>debug_compiled</c>
arguments. For more info see the, <c>erlang(3)</c>
documentation.</p> <p>The scale factor returned by
<c>test_server:timetrap_scale_factor/0</c> is now also
effected if the emulator uses a larger amount of
scheduler threads than the amount of logical processors
on the system. </p>
<p>
Own Id: OTP-7175</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.2.1</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
When init_per_suite or end_per_suite terminated due to
runtime failure, test_server failed to format the line
number information properly and crashed. This error has
now been fixed.</p>
<p>
Own Id: OTP-7091</p>
</item>
</list>
</section>
</section>
<section><title>Test_Server 3.2.0</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Test Server is a portable test server for automated
application testing. The server can run test suites on
local or remote targets and log progress and results to
HTML pages. The main purpose of Test Server is to act as
engine inside customized test tools. A callback interface
for such framework applications is provided.</p>
<p>
Own Id: OTP-6989</p>
</item>
</list>
</section>
</section>
</chapter>
