<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">
<chapter>
<header>
<copyright>
<year>2001</year><year>2013</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
</legalnotice>
<title>cover</title>
<prepared></prepared>
<docno></docno>
<date></date>
<rev></rev>
<file>cover_chapter.xml</file>
</header>
<section>
<title>Introduction</title>
<p>The module <c>cover</c> provides a set of functions for coverage
analysis of Erlang programs, counting how many times each
<seealso marker="#lines">executable line</seealso> is executed.</p>
<p>Coverage analysis can be used to verify test cases, making sure all
relevant code is covered, and may be helpful when looking for
bottlenecks in the code.</p>
</section>
<section>
<title>Getting Started With Cover</title>
<section>
<title>Example</title>
<p>Assume that a test case for the following program should be
verified:</p>
<code type="none">
-module(channel).
-behaviour(gen_server).
-export([start_link/0,stop/0]).
-export([alloc/0,free/1]). % client interface
-export([init/1,handle_call/3,terminate/2]). % callback functions
start_link() ->
gen_server:start_link({local,channel},channel,[],[]).
stop() ->
gen_server:call(channel,stop).
%%%-Client interface functions-------------------------------------------
alloc() ->
gen_server:call(channel,alloc).
free(Channel) ->
gen_server:call(channel,{free,Channel}).
%%%-gen_server callback functions----------------------------------------
init(_Arg) ->
{ok,channels()}.
handle_call(stop,Client,Channels) ->
{stop,normal,ok,Channels};
handle_call(alloc,Client,Channels) ->
{Ch,Channels2} = alloc(Channels),
{reply,{ok,Ch},Channels2};
handle_call({free,Channel},Client,Channels) ->
Channels2 = free(Channel,Channels),
{reply,ok,Channels2}.
terminate(_Reason,Channels) ->
ok.
%%%-Internal functions---------------------------------------------------
channels() ->
[ch1,ch2,ch3].
alloc([Channel|Channels]) ->
{Channel,Channels};
alloc([]) ->
false.
free(Channel,Channels) ->
[Channel|Channels].</code>
<p>The test case is implemented as follows:</p>
<code type="none">
-module(test).
-export([s/0]).
s() ->
{ok,Pid} = channel:start_link(),
{ok,Ch1} = channel:alloc(),
ok = channel:free(Ch1),
ok = channel:stop().</code>
</section>
<section>
<title>Preparation</title>
<p>First of all, Cover must be started. This spawns a process which
owns the Cover database where all coverage data will be stored.</p>
<pre>
1> <input>cover:start().</input>
{ok,<0.30.0>}</pre>
<p>To include other nodes in the coverage analysis, use
<c>start/1</c>. All cover compiled modules will then be loaded
on all nodes, and data from all nodes will be summed up when
analysing. For simplicity this example only involves the
current node.</p>
<p>Before any analysis can take place, the involved modules must be
<em>Cover compiled</em>. This means that some extra information is
added to the module before it is compiled into a binary which then
is <seealso marker="#loading">loaded</seealso>. The source file of
the module is not affected and no <c>.beam</c> file is created.</p>
<pre>
2> <input>cover:compile_module(channel).</input>
{ok,channel}</pre>
<p>Each time a function in the Cover compiled module <c>channel</c>
is called, information about the call will be added to the Cover
database. Run the test case:</p>
<pre>
3> <input>test:s().</input>
ok</pre>
<p>Cover analysis is performed by examining the contents of the Cover
database. The output is determined by two parameters, <c>Level</c>
and <c>Analysis</c>. <c>Analysis</c> is either <c>coverage</c> or
<c>calls</c> and determines the type of the analysis. <c>Level</c>
is either <c>module</c>, <c>function</c>, <c>clause</c>, or
<c>line</c> and determines the level of the analysis.</p>
</section>
<section>
<title>Coverage Analysis</title>
<p>Analysis of type <c>coverage</c> is used to find out how much of
the code has been executed and how much has not been executed.
Coverage is represented by a tuple <c>{Cov,NotCov}</c>, where
<c>Cov</c> is the number of executable lines that have been executed
at least once and <c>NotCov</c> is the number of executable lines
that have not been executed.</p>
<p>If the analysis is made on module level, the result is given for
the entire module as a tuple <c>{Module,{Cov,NotCov}}</c>:</p>
<pre>
4> <input>cover:analyse(channel,coverage,module).</input>
{ok,{channel,{14,1}}}</pre>
<p>For <c>channel</c>, the result shows that 14 lines in the module
are covered but one line is not covered.</p>
<p>If the analysis is made on function level, the result is given as
a list of tuples <c>{Function,{Cov,NotCov}}</c>, one for each
function in the module. A function is specified by its module name,
function name and arity:</p>
<pre>
5> <input>cover:analyse(channel,coverage,function).</input>
{ok,[{{channel,start_link,0},{1,0}},
{{channel,stop,0},{1,0}},
{{channel,alloc,0},{1,0}},
{{channel,free,1},{1,0}},
{{channel,init,1},{1,0}},
{{channel,handle_call,3},{5,0}},
{{channel,terminate,2},{1,0}},
{{channel,channels,0},{1,0}},
{{channel,alloc,1},{1,1}},
{{channel,free,2},{1,0}}]}</pre>
<p>For <c>channel</c>, the result shows that the uncovered line is in
the function <c>channel:alloc/1</c>.</p>
<p>If the analysis is made on clause level, the result is given as
a list of tuples <c>{Clause,{Cov,NotCov}}</c>, one for each
function clause in the module. A clause is specified by its module
name, function name, arity and position within the function
definition:</p>
<pre>
6> <input>cover:analyse(channel,coverage,clause).</input>
{ok,[{{channel,start_link,0,1},{1,0}},
{{channel,stop,0,1},{1,0}},
{{channel,alloc,0,1},{1,0}},
{{channel,free,1,1},{1,0}},
{{channel,init,1,1},{1,0}},
{{channel,handle_call,3,1},{1,0}},
{{channel,handle_call,3,2},{2,0}},
{{channel,handle_call,3,3},{2,0}},
{{channel,terminate,2,1},{1,0}},
{{channel,channels,0,1},{1,0}},
{{channel,alloc,1,1},{1,0}},
{{channel,alloc,1,2},{0,1}},
{{channel,free,2,1},{1,0}}]}</pre>
<p>For <c>channel</c>, the result shows that the uncovered line is in
the second clause of <c>channel:alloc/1</c>.</p>
<p>Finally, if the analysis is made on line level, the result is given
as a list of tuples <c>{Line,{Cov,NotCov}}</c>, one for each
executable line in the source code. A line is specified by its
module name and line number.</p>
<pre>
7> <input>cover:analyse(channel,coverage,line).</input>
{ok,[{{channel,9},{1,0}},
{{channel,12},{1,0}},
{{channel,17},{1,0}},
{{channel,20},{1,0}},
{{channel,25},{1,0}},
{{channel,28},{1,0}},
{{channel,31},{1,0}},
{{channel,32},{1,0}},
{{channel,35},{1,0}},
{{channel,36},{1,0}},
{{channel,39},{1,0}},
{{channel,44},{1,0}},
{{channel,47},{1,0}},
{{channel,49},{0,1}},
{{channel,52},{1,0}}]}</pre>
<p>For <c>channel</c>, the result shows that the uncovered line is
line number 49.</p>
</section>
<section>
<title>Call Statistics</title>
<p>Analysis of type <c>calls</c> is used to find out how many times
something has been called and is represented by an integer
<c>Calls</c>.</p>
<p>If the analysis is made on module level, the result is given as a
tuple <c>{Module,Calls}</c>. Here <c>Calls</c> is the total number
of calls to functions in the module:</p>
<pre>
8> <input>cover:analyse(channel,calls,module).</input>
{ok,{channel,12}}</pre>
<p>For <c>channel</c>, the result shows that a total of twelve calls
have been made to functions in the module.</p>
<p>If the analysis is made on function level, the result is given as
a list of tuples <c>{Function,Calls}</c>. Here <c>Calls</c> is
the number of calls to each function:</p>
<pre>
9> <input>cover:analyse(channel,calls,function).</input>
{ok,[{{channel,start_link,0},1},
{{channel,stop,0},1},
{{channel,alloc,0},1},
{{channel,free,1},1},
{{channel,init,1},1},
{{channel,handle_call,3},3},
{{channel,terminate,2},1},
{{channel,channels,0},1},
{{channel,alloc,1},1},
{{channel,free,2},1}]}</pre>
<p>For <c>channel</c>, the result shows that <c>handle_call/3</c> is
the most called function in the module (three calls). All other
functions have been called once.</p>
<p>If the analysis is made on clause level, the result is given as
a list of tuples <c>{Clause,Calls}</c>. Here <c>Calls</c> is
the number of calls to each function clause:</p>
<pre>
10> <input>cover:analyse(channel,calls,clause).</input>
{ok,[{{channel,start_link,0,1},1},
{{channel,stop,0,1},1},
{{channel,alloc,0,1},1},
{{channel,free,1,1},1},
{{channel,init,1,1},1},
{{channel,handle_call,3,1},1},
{{channel,handle_call,3,2},1},
{{channel,handle_call,3,3},1},
{{channel,terminate,2,1},1},
{{channel,channels,0,1},1},
{{channel,alloc,1,1},1},
{{channel,alloc,1,2},0},
{{channel,free,2,1},1}]}</pre>
<p>For <c>channel</c>, the result shows that all clauses have been
called once, except the second clause of <c>channel:alloc/1</c>
which has not been called at all.</p>
<p>Finally, if the analysis is made on line level, the result is given
as a list of tuples <c>{Line,Calls}</c>. Here <c>Calls</c> is
the number of times each line has been executed:</p>
<pre>
11> <input>cover:analyse(channel,calls,line).</input>
{ok,[{{channel,9},1},
{{channel,12},1},
{{channel,17},1},
{{channel,20},1},
{{channel,25},1},
{{channel,28},1},
{{channel,31},1},
{{channel,32},1},
{{channel,35},1},
{{channel,36},1},
{{channel,39},1},
{{channel,44},1},
{{channel,47},1},
{{channel,49},0},
{{channel,52},1}]}</pre>
<p>For <c>channel</c>, the result shows that all lines have been
executed once, except line number 49 which has not been executed at
all.</p>
</section>
<section>
<title>Analysis to File</title>
<p>A line level calls analysis of <c>channel</c> can be written to
a file using <c>cover:analysis_to_file/1</c>:</p>
<pre>
12> <input>cover:analyse_to_file(channel).</input>
{ok,"channel.COVER.out"}</pre>
<p>The function creates a copy of <c>channel.erl</c> where it for
each executable line is specified how many times that line has been
executed. The output file is called <c>channel.COVER.out</c>.</p>
<pre>
File generated from channel.erl by COVER 2001-05-21 at 11:16:38
****************************************************************************
| -module(channel).
| -behaviour(gen_server).
|
| -export([start_link/0,stop/0]).
| -export([alloc/0,free/1]). % client interface
| -export([init/1,handle_call/3,terminate/2]). % callback functions
|
| start_link() ->
1..| gen_server:start_link({local,channel},channel,[],[]).
|
| stop() ->
1..| gen_server:call(channel,stop).
|
| %%%-Client interface functions------------------------------------
|
| alloc() ->
1..| gen_server:call(channel,alloc).
|
| free(Channel) ->
1..| gen_server:call(channel,{free,Channel}).
|
| %%%-gen_server callback functions---------------------------------
|
| init(_Arg) ->
1..| {ok,channels()}.
|
| handle_call(stop,Client,Channels) ->
1..| {stop,normal,ok,Channels};
|
| handle_call(alloc,Client,Channels) ->
1..| {Ch,Channels2} = alloc(Channels),
1..| {reply,{ok,Ch},Channels2};
|
| handle_call({free,Channel},Client,Channels) ->
1..| Channels2 = free(Channel,Channels),
1..| {reply,ok,Channels2}.
|
| terminate(_Reason,Channels) ->
1..| ok.
|
| %%%-Internal functions--------------------------------------------
|
| channels() ->
1..| [ch1,ch2,ch3].
|
| alloc([Channel|Channels]) ->
1..| {Channel,Channels};
| alloc([]) ->
0..| false.
|
| free(Channel,Channels) ->
1..| [Channel|Channels].</pre>
</section>
<section>
<title>Conclusion</title>
<p>By looking at the results from the analyses, it can be deducted
that the test case does not cover the case when all channels are
allocated and <c>test.erl</c> should be extended accordingly. <br></br>
Incidentally, when the test case is corrected a bug in <c>channel</c>
should indeed be discovered.</p>
<p>When the Cover analysis is ready, Cover is stopped and all Cover
compiled modules are <seealso marker="#loading">unloaded</seealso>.
The code for <c>channel</c> is now loaded as usual from a
<c>.beam</c> file in the current path.</p>
<pre>
13> <input>code:which(channel).</input>
cover_compiled
14> <input>cover:stop().</input>
ok
15> <input>code:which(channel).</input>
"./channel.beam"</pre>
</section>
</section>
<section>
<title>Miscellaneous</title>
<section>
<title>Performance</title>
<p>Execution of code in Cover compiled modules is slower and more
memory consuming than for regularly compiled modules. As the Cover
database contains information about each executable line in each
Cover compiled module, performance decreases proportionally to
the size and number of the Cover compiled modules.</p>
<p>To improve performance when analysing cover results it is possible
to do multiple calls to <seealso marker="cover#analyse-1">analyse</seealso>
and <seealso marker="cover#analyse_to_file-1">analyse_to_file</seealso>
at once. You can also use the
<seealso marker="cover#async_analyse_to_file-1">async_analyse_to_file</seealso>
convenience function.
</p>
</section>
<section>
<marker id="lines"></marker>
<title>Executable Lines</title>
<p>Cover uses the concept of <em>executable lines</em>, which is lines
of code containing an executable expression such as a matching or
a function call. A blank line or a line containing a comment,
function head or pattern in a <c>case</c>- or <c>receive</c>
statement is not executable.</p>
<p>In the example below, lines number 2,4,6,8 and 11 are executable
lines:</p>
<p></p>
<pre>
1: is_loaded(Module,Compiled) ->
2: case get_file(Module,Compiled) of
3: {ok,File} ->
4: case code:which(Module) of
5: ?TAG ->
6: {loaded,File};
7: _ ->
8: unloaded
9: end;
10: false ->
11: false
12: end.</pre>
</section>
<section>
<marker id="loading"></marker>
<title>Code Loading Mechanism</title>
<p>When a module is Cover compiled, it is also loaded using the normal
code loading mechanism of Erlang. This means that if a Cover
compiled module is re-loaded during a Cover session, for example
using <c>c(Module)</c>, it will no longer be Cover compiled.</p>
<p>Use <c>cover:is_compiled/1</c> or <c>code:which/1</c> to see if
a module is Cover compiled (and still loaded) or not.</p>
<p>When Cover is stopped, all Cover compiled modules are unloaded.</p>
</section>
</section>
<section>
<title>Using the Web Based User Interface to Cover</title>
<section>
<title>Introduction</title>
<p>To ease the use of Cover there is a web based user interface
to Cover called WebCover. WebCover is designed to be started
and used via WebTool. It is possible to Cover compile Erlang
modules and to generate printable Cover and Call analyses via
the web based user interface.</p>
</section>
<section>
<title>Start the Web Based User Interface to Cover</title>
<p>To start WebCover you can either start WebTool, point a
browser to the start page of WebTool and start WebCover from
there, or you can use the <c>start_webtool</c> script to start
Webtool, WebCover and a browser. See WebTool documentation for
further information.</p>
<p>Currently WebCover is only compatible
with Internet Explorer and Netscape Navigator 4.0 and higher.</p>
</section>
<section>
<title>Navigating WebCover</title>
<p>From the menu in the lefthand frame you can select the
<c>Nodes</c>, <c>Compile</c>, <c>Import</c> or <c>Result</c>
page.</p>
<p>From the <c>Nodes</c> page you can add remote nodes to
participate in the coverage analysis. Coverage data from all
involved nodes will then be merged during analysis.</p>
<p>From the <c>Compile</c> page you can Cover compile <c>.erl</c>
or <c>.beam</c> files.</p>
<p>From the <c>Import</c> page you can import coverage data from
a previous analysis. Imported data will then be merged with
the current coverage data. <em>Note</em> that it is only possible to
import files with the extension <c>.coverdata</c>.</p>
<p>From the <c>Result</c> page you can analyse, reset or export
coverage data.</p>
<p>Please follow the instructions on each page.</p>
</section>
</section>
</chapter>
