path: root/lib/tools/doc/src/lcnt.xml

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
    <header>
	<copyright>
	    <year>2009</year>
	    <year>2018</year>
	    <holder>Ericsson AB, All Rights Reserved</holder>
	</copyright>
	<legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
 
          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.

      The Initial Developer of the Original Code is Ericsson AB.
	</legalnotice>

	<title>lcnt</title>
	<prepared>Björn-Egil Dahlberg</prepared>
	<responsible>nobody</responsible>
	<docno></docno>
	<approved>nobody</approved>
	<checked></checked>
	<date>2009-11-26</date>
	<rev>PA1</rev>
	<file>lcnt.xml</file>
    </header>
    <module since="OTP R13B04">lcnt</module>
    <modulesummary>A runtime system Lock Profiling tool.</modulesummary>
    <description>
	<p>The <c>lcnt</c> module is used to profile the internal ethread locks in the
	    Erlang Runtime System. With <c>lcnt</c> enabled, internal counters in the
	    runtime system are updated each time a lock is taken. The counters stores
	    information about the number of acquisition tries and the number of collisions
	    that has occurred during the acquisition tries. The counters also record the
	    waiting time a lock has caused for a blocked thread when a collision has occurred.
	</p>
	<p>
	    The data produced by the lock counters will give an estimate on how well
	    the runtime system will behave from a parallelizable view point for the
	    scenarios tested. This tool was mainly developed to help Erlang runtime
	    developers iron out potential and generic bottlenecks.
	</p>
	<p>Locks in the emulator are named after what type of resource they protect and where
	    in the emulator they are initialized, those are lock 'classes'. Most of those
	    locks are also instantiated several times, and given unique identifiers, to increase
	    locking granularity. Typically an instantiated lock protects a disjunct set of
	    the resource, for example ets tables, processes or ports. In other cases it protects a
	    specific range of a resource, for example <c>pix_lock</c> which protects index to process
	    mappings, and is given a unique number within the class. A unique lock in <c>lcnt</c>
	    is referenced by a name (class) and an identifier: <c>{Name, Id}</c>.
	</p>
	<p>Some locks in the system are static and protects global resources, for example
	    <c>bif_timers</c> and the <c>run_queue</c> locks. Other locks are dynamic and not
	    necessarily long lived, for example process locks and ets-table locks. The
	    statistics data from short lived locks can be stored separately when the locks
	    are deleted. This behavior is by default turned off to save memory but can be
	    turned on via <c>lcnt:rt_opt({copy_save, true})</c>. The <c>lcnt:apply/1,2,3</c>
	    functions enables this behavior during profiling.
	</p>
    </description>
    <funcs>

	<func>
	    <name since="OTP R13B04">start() -> {ok, Pid} | {error, {already_started, Pid}} </name>
	    <fsummary>Starts the lock profiler server.</fsummary>
	    <type>
		<v>Pid = pid()</v>
	    </type>
	    <desc>
		<p>Starts the lock profiler server. The server only act as a medium for the
		    user and performs filtering and printing of data collected by <c>lcnt:collect/1</c>.
		</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">stop() -> ok</name>
	    <fsummary>Stops the lock profiler server.</fsummary>
	    <desc>
		<p>Stops the lock profiler server.</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">collect() -> ok</name>
	    <fsummary>Same as <c>collect(node())</c>.</fsummary>
	    <desc><p>Same as <c>collect(node())</c>.</p></desc>
	</func>

	<func>
	    <name since="OTP R13B04">collect(Node) -> ok</name>
	    <fsummary>Collects lock statistics from the runtime system.</fsummary>
	    <type>
		<v>Node = node()</v>
	    </type>
	    <desc>
		<p>Collects lock statistics from the runtime system. The function starts a
		    server if it is not already started. It then populates the server with lock
		    statistics. If the server held any lock statistics data before the collect then
		    that data is lost.
		</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">clear() -> ok</name>
	    <fsummary>Same as <c>clear(node())</c>.</fsummary>
	    <desc><p>Same as <c>clear(node())</c>.</p></desc>
	</func>

	<func>
	    <name since="OTP R13B04">clear(Node) -> ok</name>
	    <fsummary>Clears the internal lock statistics from runtime system.</fsummary>
	    <type>
		<v>Node = node()</v>
	    </type>
	    <desc>
		<p>Clears the internal lock statistics from the runtime system. This does not clear the
		    data on the server only on runtime system. All counters for static locks are zeroed,
		    all dynamic locks currently alive are zeroed and all saved locks now destroyed are removed.
		    It also resets the duration timer.
		</p>
	    </desc>
	</func>
	<func>
	    <name since="OTP R13B04">conflicts() -> ok</name>
	    <fsummary>Same as <c>conflicts([])</c>.</fsummary>
	    <desc><p>Same as <c>conflicts([])</c>.</p></desc>
	</func>
	<func>
	    <name since="OTP R13B04">conflicts([Option]) -> ok</name>
	    <fsummary>Prints a list of internal lock counters.</fsummary>
	    <type>
		<v>Option     = {sort, Sort} | {reverse, bool()} | {thresholds, [Thresholds]} | {print, [Print | {Print, integer()}]} | {max_locks, MaxLocks} | {combine, bool()}</v>
		<v>Sort       = name | id | type | tries | colls | ratio | time | entry</v>
		<v>Thresholds = {tries, integer()} | {colls, integer()} | {time, integer()}</v>
		<v>Print      = name | id | type | entry | tries | colls | ratio | time | duration</v>
		<v>MaxLocks   = integer() | none</v>
	    </type>
	    <desc>
		<p>Prints a list of internal locks and its statistics.</p>
		<p>For option description, see <seealso marker="#inspect/2">lcnt:inspect/2</seealso>.</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">locations() -> ok</name>
	    <fsummary>Same as <c>locations([])</c>.</fsummary>
	    <desc>
		<p>Same as <c>locations([])</c>.</p>
	    </desc>
	</func>
	<func>
	    <name since="OTP R13B04">locations([Option]) -> ok</name>
	    <fsummary>Prints a list of internal lock counters by source code locations.</fsummary>
	    <type>
		<v>Option     = {sort, Sort} | {thresholds, [Thresholds]} | {print, [Print | {Print, integer()}]} | {max_locks, MaxLocks} | {combine, bool()}</v>
		<v>Sort       = name | id | type | tries | colls | ratio | time | entry</v>
		<v>Thresholds = {tries, integer()} | {colls, integer()} | {time, integer()}</v>
		<v>Print      = name | id | type | entry | tries | colls | ratio | time | duration</v>
		<v>MaxLocks   = integer() | none</v>
	    </type>
	    <desc>
		<p>Prints a list of internal lock counters by source code locations.</p>
		<p>For option description, see <seealso marker="#inspect/2">lcnt:inspect/2</seealso>.</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">inspect(Lock) -> ok</name>
	    <fsummary>Same as <c>inspect(Lock, [])</c>.</fsummary>
	    <desc><p>Same as <c>inspect(Lock, [])</c>.</p></desc>
	</func>
	<func>
	    <name since="OTP R13B04">inspect(Lock, [Option]) -> ok</name>
	    <fsummary>Prints a list of internal lock counters for a specific lock.</fsummary>
	    <type>
		<v>Lock       = Name | {Name, Id | [Id]}</v>
		<v>Name       = atom() | pid() | port()</v>
		<v>Id         = atom() | integer() | pid() | port()</v>
		<v>Option     = {sort, Sort} | {thresholds, [Thresholds]} | {print, [Print | {Print, integer()}]} | {max_locks, MaxLocks} | {combine, bool()} | {locations, bool()}</v>
		<v>Sort       = name | id | type | tries | colls | ratio | time</v>
		<v>Thresholds = {tries, integer()} | {colls, integer()} | {time, integer()}</v>
		<v>Print      = name | id | type | entry | tries | colls | ratio | time | duration</v>
		<v>MaxLocks   = integer() | none</v>
	    </type>
	    <desc>
		<p>Prints a list of internal lock counters for a specific lock.</p>
		<p>Lock <c>Name</c> and <c>Id</c> for ports and processes are interchangeable with the use of <c>lcnt:swap_pid_keys/0</c> and is the reason why <c>pid()</c> and <c>port()</c> options can be used in both <c>Name</c> and <c>Id</c> space. Both pids and ports are special identifiers with stripped creation and can be recreated with <seealso marker="#pid/3">lcnt:pid/2,3</seealso> and <seealso marker="#port/2">lcnt:port/1,2</seealso>.  </p>
		<p>Option description:</p>
		<taglist>
		    <tag><c>{combine, bool()}</c></tag>
		    <item>Combine the statistics from different instances of a lock class.
			<br/>Default: <c>true</c>
		    </item>

		    <tag><c>{locations, bool()}</c></tag>
		    <item>Print the statistics by source file and line numbers.
			<br/>Default: <c>false</c>
		    </item>

		    <tag><c>{max_locks, MaxLocks}</c></tag>
		    <item>Maximum number of locks printed or no limit with <c>none</c>.
			<br/>Default: <c>20</c>
		    </item>

		    <tag><c>{print, PrintOptions}</c></tag>
		    <item>Printing options:
			<taglist>
			    <tag><c>name</c></tag>
			    <item>Named lock or named set of locks (classes). The same name used for initializing the lock in the VM.</item>

			    <tag><c>id</c></tag>
			    <item>Internal id for set of locks, not always unique. This could be table name for ets tables (db_tab), port id for ports, integer identifiers for allocators, etc.</item>

			    <tag><c>type</c></tag>
			    <item>Type of lock: <c>rw_mutex</c>, <c>mutex</c>, <c>spinlock</c>, <c>rw_spinlock</c> or <c>proclock</c>.</item>

			    <tag><c>entry</c></tag>
			    <item>In combination with <c>{locations, true}</c> this option prints the lock operations source file and line number entry-points along with statistics for each entry. </item>

			    <tag><c>tries</c></tag>
			    <item>Number of acquisitions of this lock.</item>

			    <tag><c>colls</c></tag>
			    <item>Number of collisions when a thread tried to acquire this lock. This is when a trylock is EBUSY, a write try on read held rw_lock, a try read on write held rw_lock, a thread tries to lock an already locked lock. (Internal states supervises this).</item>

			    <tag><c>ratio</c></tag>
			    <item>The ratio between the number of collisions and the number of tries (acquisitions) in percentage.</item>

			    <tag><c>time</c></tag>
			    <item>Accumulated waiting time for this lock. This could be greater than actual wall clock time, it is accumulated for all threads. Trylock conflicts does not accumulate time.</item>

			    <tag><c>duration</c></tag>
			    <item>Percentage of accumulated waiting time of wall clock time. This percentage can be higher than 100% since accumulated time is from all threads.</item>
			</taglist>
			<br/>Default: <c>[name,id,tries,colls,ratio,time,duration]</c>
		    </item>

		    <tag><c>{reverse, bool()}</c></tag>
		    <item>Reverses the order of sorting.
			<br/>Default: <c>false</c>
		    </item>

		    <tag><c>{sort, Sort}</c></tag>
		    <item>Column sorting orders.
			<br/>Default: <c>time</c>
		    </item>

		    <tag><c>{thresholds, Thresholds}</c></tag>
		    <item>Filtering thresholds. Anything values above the threshold value are passed through.
			<br/>Default: <c>[{tries, 0}, {colls, 0}, {time, 0}]</c>
		    </item>

		</taglist>

	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">information() -> ok</name>
	    <fsummary>Prints lcnt server state and generic information about collected lock statistics.</fsummary>
	    <desc>
		<p>Prints lcnt server state and generic information about collected lock statistics.</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">swap_pid_keys() -> ok</name>
	    <fsummary>Swaps places on <c>Name</c> and <c>Id</c> space for ports and processes.</fsummary>
	    <desc>
		<p>Swaps places on <c>Name</c> and <c>Id</c> space for ports and processes.</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">load(Filename) -> ok</name>
	    <fsummary>Restores previously saved data to the server.</fsummary>
	    <type>
		<v>Filename = filename()</v>
	    </type>
	    <desc>
		<p>Restores previously saved data to the server.</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">save(Filename) -> ok</name>
	    <fsummary>Saves the collected data to file.</fsummary>
	    <type>
		<v>Filename = filename()</v>
	    </type>
	    <desc>
		<p>Saves the collected data to file.</p>
	    </desc>
	</func>
    </funcs>

    <section>
	<title>Convenience functions</title>
	<p>The following functions are used for convenience.</p>
    </section>
    <funcs>
	<func>
	    <name since="OTP R13B04">apply(Fun) -> term()</name>
	    <fsummary>Same as <c>apply(Fun, [])</c>.</fsummary>
	    <type>
		<v>Fun = fun()</v>
	    </type>
	    <desc>
		<p>Same as <c>apply(Fun, [])</c>.</p>
	    </desc>
	</func>
	<func>
	    <name since="OTP R13B04">apply(Fun, Args) -> term()</name>
	    <fsummary>Same as <c>apply(Module, Function, Args)</c>.</fsummary>
	    <type>
		<v>Fun = fun()</v>
		<v>Args = [term()]</v>
	    </type>
	    <desc>
		<p>Same as <c>apply(Module, Function, Args)</c>.</p>
	    </desc>
	</func>
	<func>
	    <name since="OTP R13B04">apply(Module, Function, Args) -> term()</name>
	    <fsummary>Clears counters, applies function and collects the profiling results.</fsummary>
	    <type>
		<v>Module = atom()</v>
		<v>Function = atom()</v>
		<v>Args = [term()]</v>
	    </type>
	    <desc>
		<p> Clears the lock counters and then setups the instrumentation to save all destroyed locks.
		    After setup the function is called, passing the elements in <c>Args</c> as arguments.
		    When the function returns the statistics are immediately collected to the server. After the
		    collection the instrumentation is returned to its previous behavior.
		    The result of the applied function is returned.
		</p>
                <warning>
                    <p>
                        This function should only be used for micro-benchmarks; it sets <c>copy_save</c>
                        to <c>true</c> for the duration of the call, which can quickly lead to running
                        out of memory.
                    </p>
                </warning>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">pid(Id, Serial) -> pid()</name>
	    <fsummary>Same as <c>pid(node(), Id, Serial)</c>.</fsummary>
	    <desc><p>Same as <c>pid(node(), Id, Serial)</c>.</p></desc>
	</func>
	<func>
	    <name since="OTP R13B04">pid(Node, Id, Serial) -> pid()</name>
	    <fsummary>Creates a process id with creation 0.</fsummary>
	    <type>
		<v>Node = node()</v>
		<v>Id = integer()</v>
		<v>Serial = integer()</v>
	    </type>
	    <desc>
		<p>Creates a process id with creation 0.</p>
	    </desc>
	</func>

	<func>
	    <name since="OTP R13B04">port(Id) -> port()</name>
	    <fsummary>Same as <c>port(node(), Id)</c>.</fsummary>
	    <desc><p>Same as <c>port(node(), Id)</c>.</p></desc>
	</func>
	<func>
	    <name since="OTP R13B04">port(Node, Id) -> port()</name>
	    <fsummary>Creates a port id with creation 0.</fsummary>
	    <type>
		<v>Node = node()</v>
		<v>Id = integer()</v>
	    </type>
	    <desc><p>Creates a port id with creation 0.</p></desc>
	</func>

    </funcs>

    <section>
	<title>Internal runtime lock counter controllers</title>
	<p> The following functions control the behavior of the internal counters.  </p>
    </section>

    <funcs>
	<func>
	    <name since="OTP R13B04">rt_collect() -> [lock_counter_data()]</name>
	    <fsummary>Same as <c>rt_collect(node())</c>.</fsummary>
	    <desc> <p>Same as <c>rt_collect(node())</c>.</p> </desc>
	</func>
	<func>
	    <name since="OTP R13B04">rt_collect(Node) -> [lock_counter_data()]</name>
	    <fsummary>Returns a list of raw lock counter data.</fsummary>
	    <type>
		<v>Node = node()</v>
	    </type>
	    <desc> <p>Returns a list of raw lock counter data.</p> </desc>
	</func>

	<func>
	    <name since="OTP R13B04">rt_clear() -> ok</name>
	    <fsummary>Same as <c>rt_clear(node())</c>.</fsummary>
	    <desc> <p>Same as <c>rt_clear(node())</c>.</p> </desc>
	</func>
	<func>
	    <name since="OTP R13B04">rt_clear(Node) -> ok</name>
	    <fsummary>Clears the internal counters.</fsummary>
	    <type>
		<v>Node = node()</v>
	    </type>
	    <desc> <p>Clear the internal counters. Same as <c>lcnt:clear(Node)</c>.</p></desc>
	</func>

        <func>
            <name since="OTP 20.1">rt_mask() -> [category_atom()]</name>
            <fsummary>Same as <c>rt_mask(node())</c>.</fsummary>
            <desc><p>Same as <c>rt_mask(node())</c>.</p></desc>
        </func>

        <func>
            <name since="OTP 20.1">rt_mask(Node) -> [category_atom()]</name>
            <fsummary>Returns the current lock category mask.</fsummary>
            <type>
                <v>Node = node()</v>
            </type>
            <desc>
                <p>
                    Refer to <c>rt_mask/2</c> for a list of valid categories. All
                    categories are enabled by default.
                </p>
            </desc>
        </func>

        <func>
            <name since="OTP 20.1">rt_mask(Categories) -> ok | {error, copy_save_enabled}</name>
            <fsummary>Same as <c>rt_mask(node(), Categories)</c>.</fsummary>
            <type>
                <v>Categories = [atom()]</v>
            </type>
            <desc><p>Same as <c>rt_mask(node(), Categories)</c>.</p></desc>
        </func>

        <func>
            <name since="OTP 20.1">rt_mask(Node, Categories) -> ok | {error, copy_save_enabled}</name>
            <fsummary>Changes the lock category mask.</fsummary>
            <type>
                <v>Node = node()</v>
                <v>Categories = [atom()]</v>
            </type>
            <desc>
                <p>
                    Sets the lock category mask to the given categories.
                </p>
                <p>
                    This will fail if the <c>copy_save</c> option is enabled; see
                    <c>lcnt:rt_opt/2</c>.
                </p>
                <p>Valid categories are:</p>
                <list>
                    <item><c>allocator</c></item>
                    <item><c>db</c> (ETS tables)</item>
                    <item><c>debug</c></item>
                    <item><c>distribution</c></item>
                    <item><c>generic</c></item>
                    <item><c>io</c></item>
                    <item><c>process</c></item>
                    <item><c>scheduler</c></item>
                </list>
                <p>
                    This list is subject to change at any time, as is the category any given lock
                    may belong to.
                </p>
            </desc>
        </func>

	<func>
	    <name since="OTP R13B04">rt_opt({Type, bool()}) -> bool()</name>
	    <fsummary>Same as <c>rt_opt(node(), {Type, Opt})</c>.</fsummary>
	    <desc> <p>Same as <c>rt_opt(node(), {Type, Opt})</c>.</p> </desc>
	</func>
	<func>
	    <name since="OTP R13B04">rt_opt(Node, {Type, bool()}) -> bool()</name>
	    <fsummary>Changes the lock counter behavior and returns the previous behaviour.</fsummary>
	    <type>
		<v>Node = node()</v>
		<v>Type = copy_save | process_locks</v>
	    </type>
	    <desc>
		<p>Option description:</p>
		<taglist>
		    <tag><c>{copy_save, bool()}</c></tag>
		    <item>Retains the statistics of destroyed locks.
			<br/>Default: <c>false</c>
                        <warning>
                            <p>
                                This option will use a lot of memory when enabled, which must be
                                reclaimed with <c>lcnt:rt_clear</c>. Note that it makes no distinction
                                between locks that were destroyed and locks for which counting was
                                disabled, so enabling this option will disable changes to the lock
                                category mask.
                            </p>
                        </warning>
		    </item>

		    <tag><c>{process_locks, bool()}</c></tag>
		    <item>Profile process locks, equal to adding <c>process</c> to the lock category mask;
            see <c>lcnt:rt_mask/2</c>
			<br/>Default: <c>true</c>
		    </item>
		</taglist>
	    </desc>
	</func>
    </funcs>

    <section>
	<title>See Also</title>
	<p> <seealso marker="lcnt_chapter">LCNT User's Guide</seealso></p>
    </section>
</erlref>