path: root/xcomp/erl-xcomp-vxworks_ppc32.conf

###
### %CopyrightBegin%
### 
### Copyright Ericsson AB 2009. All Rights Reserved.
### 
### The contents of this file are subject to the Erlang Public License,
### Version 1.1, (the "License"); you may not use this file except in
### compliance with the License. You should have received a copy of the
### Erlang Public License along with this software. If not, it can be
### retrieved online at http://www.erlang.org/.
### 
### Software distributed under the License is distributed on an "AS IS"
### basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
### the License for the specific language governing rights and limitations
### under the License.
### 
### %CopyrightEnd%
###
### File: erl-xcomp-vxworks_ppc32.conf
### Author: Rickard Green/Patrik Nyblom
###

### ----------------------------------------------------------------------------
### When cross compiling Erlang/OTP, copy this file and set the variables
### needed below. Then pass the path to the copy of this file as an argument
### to "eval `otp_build env_cross <path to erl-xcomp.conf file>`".
### ----------------------------------------------------------------------------

### ----------------------------------------------------------------------------
### Variables in the following section *have* to be set.
###

##
## Operating system and hardware architecture.
##
# Operating system: linux|solaris<ver>|darwin|freebsd|win32|<...>
erl_xcomp_os=vxworks
# Hardware architecture: x86|x86_64|ultrasparc|sparc64|ppc|arm|tile|<...>
# Note that this will be the host parameter to configure, so it
# should be both recognizable by config.sub and a valid prefix for
# i.e. gcc etc. 
erl_xcomp_hw=ppc-wrs
# Manufacturer: (unknown is ok)
erl_xcomp_man=wrs
# Extra target info (unknown is ok)
erl_xcomp_target_xtra=unknown

# Target (change if default isn't satisfactory)
erl_xcomp_target=powerpc-wrs-vxworks

##
## Sizes (in bytes) of some important types.
##
# void *
erl_xcomp_void_p=4
# short
erl_xcomp_short=2
# int
erl_xcomp_int=4
# long
erl_xcomp_long=4
# long long (use 0 if no 'long long' type exist)
erl_xcomp_long_long=8
# size_t
erl_xcomp_sizeof_size_t=4
# off_t
erl_xcomp_sizeof_off_t=4

### ----------------------------------------------------------------------------
### The variables in the following section have to be set for linux systems
###
# linux kernel version (as reported by "uname -r")
erl_xcomp_linux_kernel=

### ----------------------------------------------------------------------------
### ---------------------------------------------------------------------------
### To override the configure flags for a special target system, You
### can set this variable which overrides configure parameters on the 
### command line and instead uses the specified options. The variable
### leaves the build-host system untouched.
### ---------------------------------------------------------------------------
erl_xcomp_configure_flags="--without-termcap"

###----------------------------------------------------------------------------
### You can specify a specific CC or LD for the build target (the cross 
### compiler) here along with magic CFLAGS and/or LDFLAGS if needed
###----------------------------------------------------------------------------

erl_xcomp_cc="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/ccppc"

erl_xcomp_ld="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/ldppc"

erl_xcomp_cflags="-DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -I$WIND_BASE/vxworks-6.3/target/h -I$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/lib/gcc/powerpc-wrs-vxworks/3.4.4/include -I$WIND_BASE/vxworks-6.3/target/h/wrn/coreip -I$WIND_BASE/vxworks-6.3/target/h -mstrict-align -fvolatile -fno-builtin -mlongcall"

erl_xcomp_cpp="$erl_xcomp_cc $erl_xcomp_cflags -E"

erl_xcomp_ldflags="-mlongcall"

erl_xcomp_ranlib="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/ranlibppc"
erl_xcomp_ar="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/arppc"

###----------------------------------------------------------------------------
### The ded_ls and ded_ldflags variables control linking of dynamically loaded
### erlang drivers. On i.e. Linux these are set to
### $(CC) and "-shared" respectively, but other OS'es might need other
### programs and flags to build a dynamic library. 
### erl_xcomp_ded_ld_runtime_library_path is the flag to set a
### specific runtime library path for the shared library at link time, 
### usually this should be left empty.
###----------------------------------------------------------------------------

erl_xcomp_ded_ld=

erl_xcomp_ded_ldflags=

erl_xcomp_ded_ld_runtime_library_path=

### The variables in the following section does not need to be set. Only
### set these if you really know what you are doing.
###

##
## Big endian/little endian can usually be determined by configure correctly, 
## but if not, set this variable
##
erl_xcomp_bigendian=yes

##
## If you have a working poll that can be used: yes|no
##
erl_xcomp_poll=

##
## If you have a working kqueue() that can be used: yes|no
##
erl_xcomp_kqueue=

##
## If you have a putenv() that stores a copy of the key-value pair: yes|no
##
erl_xcomp_putenv_copy=

##
## If you have reliable floating point exeptions that can be
## used: yes|no
##
erl_xcomp_reliable_fpe=

##
## If you have getaddrinfo() usable for ipv6: yes|no
##
erl_xcomp_getaddrinfo=

##
## If you have a gethrvtime() that works and uses ioctl()
## to /proc/self: yes|no
##
erl_xcomp_gethrvtime_procfs_ioctl=

##
## If you have a working clock_gettime(): yes|no
##
erl_xcomp_clock_gettime=

##
## If you have a __after_morecore_hook that can track malloc()s
## core memory use: yes|no
##
erl_xcomp_after_morecore_hook=

##
## If you have brk, sbrk and end symbols: yes|no
##
# brk
erl_xcomp_have_brk=
# _brk
erl_xcomp_have__brk=
# __brk
erl_xcomp_have___brk=
# sbrk
erl_xcomp_have_sbrk=
# _sbrk
erl_xcomp_have__sbrk=
# __sbrk
erl_xcomp_have___sbrk=
# end
erl_xcomp_end=
# _end
erl_xcomp__end=

##
## If sbrk/brk wrappers using dlsym(RTLD_NEXT, _) can track malloc()s
## core memory use: yes|no
##
erl_xcomp_brk_wrappers=

### ----------------------------------------------------------------------------