Merge branch 'bmk/inets/inets58_integration'

20 files changed, 3832 insertions, 154 deletions

diff --git a/lib/inets/doc/archive/rfc3986.txt b/lib/inets/doc/archive/rfc3986.txt
new file mode 100644
index 0000000000..c56ed4eb70
--- /dev/null
+++ b/lib/inets/doc/archive/rfc3986.txt
@@ -0,0 +1,3419 @@
+
+
+
+
+
+
+Network Working Group                                     T. Berners-Lee
+Request for Comments: 3986                                       W3C/MIT
+STD: 66                                                      R. Fielding
+Updates: 1738                                               Day Software
+Obsoletes: 2732, 2396, 1808                                  L. Masinter
+Category: Standards Track                                  Adobe Systems
+                                                            January 2005
+
+
+           Uniform Resource Identifier (URI): Generic Syntax
+
+Status of This Memo
+
+   This document specifies an Internet standards track protocol for the
+   Internet community, and requests discussion and suggestions for
+   improvements.  Please refer to the current edition of the "Internet
+   Official Protocol Standards" (STD 1) for the standardization state
+   and status of this protocol.  Distribution of this memo is unlimited.
+
+Copyright Notice
+
+   Copyright (C) The Internet Society (2005).
+
+Abstract
+
+   A Uniform Resource Identifier (URI) is a compact sequence of
+   characters that identifies an abstract or physical resource.  This
+   specification defines the generic URI syntax and a process for
+   resolving URI references that might be in relative form, along with
+   guidelines and security considerations for the use of URIs on the
+   Internet.  The URI syntax defines a grammar that is a superset of all
+   valid URIs, allowing an implementation to parse the common components
+   of a URI reference without knowing the scheme-specific requirements
+   of every possible identifier.  This specification does not define a
+   generative grammar for URIs; that task is performed by the individual
+   specifications of each URI scheme.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 1]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+Table of Contents
+
+   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  4
+       1.1.  Overview of URIs . . . . . . . . . . . . . . . . . . . .  4
+             1.1.1.  Generic Syntax . . . . . . . . . . . . . . . . .  6
+             1.1.2.  Examples . . . . . . . . . . . . . . . . . . . .  7
+             1.1.3.  URI, URL, and URN  . . . . . . . . . . . . . . .  7
+       1.2.  Design Considerations  . . . . . . . . . . . . . . . . .  8
+             1.2.1.  Transcription  . . . . . . . . . . . . . . . . .  8
+             1.2.2.  Separating Identification from Interaction . . .  9
+             1.2.3.  Hierarchical Identifiers . . . . . . . . . . . . 10
+       1.3.  Syntax Notation  . . . . . . . . . . . . . . . . . . . . 11
+   2.  Characters . . . . . . . . . . . . . . . . . . . . . . . . . . 11
+       2.1.  Percent-Encoding . . . . . . . . . . . . . . . . . . . . 12
+       2.2.  Reserved Characters  . . . . . . . . . . . . . . . . . . 12
+       2.3.  Unreserved Characters  . . . . . . . . . . . . . . . . . 13
+       2.4.  When to Encode or Decode . . . . . . . . . . . . . . . . 14
+       2.5.  Identifying Data . . . . . . . . . . . . . . . . . . . . 14
+   3.  Syntax Components  . . . . . . . . . . . . . . . . . . . . . . 16
+       3.1.  Scheme . . . . . . . . . . . . . . . . . . . . . . . . . 17
+       3.2.  Authority  . . . . . . . . . . . . . . . . . . . . . . . 17
+             3.2.1.  User Information . . . . . . . . . . . . . . . . 18
+             3.2.2.  Host . . . . . . . . . . . . . . . . . . . . . . 18
+             3.2.3.  Port . . . . . . . . . . . . . . . . . . . . . . 22
+       3.3.  Path . . . . . . . . . . . . . . . . . . . . . . . . . . 22
+       3.4.  Query  . . . . . . . . . . . . . . . . . . . . . . . . . 23
+       3.5.  Fragment . . . . . . . . . . . . . . . . . . . . . . . . 24
+   4.  Usage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
+       4.1.  URI Reference  . . . . . . . . . . . . . . . . . . . . . 25
+       4.2.  Relative Reference . . . . . . . . . . . . . . . . . . . 26
+       4.3.  Absolute URI . . . . . . . . . . . . . . . . . . . . . . 27
+       4.4.  Same-Document Reference  . . . . . . . . . . . . . . . . 27
+       4.5.  Suffix Reference . . . . . . . . . . . . . . . . . . . . 27
+   5.  Reference Resolution . . . . . . . . . . . . . . . . . . . . . 28
+       5.1.  Establishing a Base URI  . . . . . . . . . . . . . . . . 28
+             5.1.1.  Base URI Embedded in Content . . . . . . . . . . 29
+             5.1.2.  Base URI from the Encapsulating Entity . . . . . 29
+             5.1.3.  Base URI from the Retrieval URI  . . . . . . . . 30
+             5.1.4.  Default Base URI . . . . . . . . . . . . . . . . 30
+       5.2.  Relative Resolution  . . . . . . . . . . . . . . . . . . 30
+             5.2.1.  Pre-parse the Base URI . . . . . . . . . . . . . 31
+             5.2.2.  Transform References . . . . . . . . . . . . . . 31
+             5.2.3.  Merge Paths  . . . . . . . . . . . . . . . . . . 32
+             5.2.4.  Remove Dot Segments  . . . . . . . . . . . . . . 33
+       5.3.  Component Recomposition  . . . . . . . . . . . . . . . . 35
+       5.4.  Reference Resolution Examples  . . . . . . . . . . . . . 35
+             5.4.1.  Normal Examples  . . . . . . . . . . . . . . . . 36
+             5.4.2.  Abnormal Examples  . . . . . . . . . . . . . . . 36
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 2]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   6.  Normalization and Comparison . . . . . . . . . . . . . . . . . 38
+       6.1.  Equivalence  . . . . . . . . . . . . . . . . . . . . . . 38
+       6.2.  Comparison Ladder  . . . . . . . . . . . . . . . . . . . 39
+             6.2.1.  Simple String Comparison . . . . . . . . . . . . 39
+             6.2.2.  Syntax-Based Normalization . . . . . . . . . . . 40
+             6.2.3.  Scheme-Based Normalization . . . . . . . . . . . 41
+             6.2.4.  Protocol-Based Normalization . . . . . . . . . . 42
+   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 43
+       7.1.  Reliability and Consistency  . . . . . . . . . . . . . . 43
+       7.2.  Malicious Construction . . . . . . . . . . . . . . . . . 43
+       7.3.  Back-End Transcoding . . . . . . . . . . . . . . . . . . 44
+       7.4.  Rare IP Address Formats  . . . . . . . . . . . . . . . . 45
+       7.5.  Sensitive Information  . . . . . . . . . . . . . . . . . 45
+       7.6.  Semantic Attacks . . . . . . . . . . . . . . . . . . . . 45
+   8.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 46
+   9.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 46
+   10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 46
+       10.1. Normative References . . . . . . . . . . . . . . . . . . 46
+       10.2. Informative References . . . . . . . . . . . . . . . . . 47
+   A.  Collected ABNF for URI . . . . . . . . . . . . . . . . . . . . 49
+   B.  Parsing a URI Reference with a Regular Expression  . . . . . . 50
+   C.  Delimiting a URI in Context  . . . . . . . . . . . . . . . . . 51
+   D.  Changes from RFC 2396  . . . . . . . . . . . . . . . . . . . . 53
+       D.1.  Additions  . . . . . . . . . . . . . . . . . . . . . . . 53
+       D.2.  Modifications  . . . . . . . . . . . . . . . . . . . . . 53
+   Index  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
+   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 60
+   Full Copyright Statement . . . . . . . . . . . . . . . . . . . . . 61
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 3]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+1.  Introduction
+
+   A Uniform Resource Identifier (URI) provides a simple and extensible
+   means for identifying a resource.  This specification of URI syntax
+   and semantics is derived from concepts introduced by the World Wide
+   Web global information initiative, whose use of these identifiers
+   dates from 1990 and is described in "Universal Resource Identifiers
+   in WWW" [RFC1630].  The syntax is designed to meet the
+   recommendations laid out in "Functional Recommendations for Internet
+   Resource Locators" [RFC1736] and "Functional Requirements for Uniform
+   Resource Names" [RFC1737].
+
+   This document obsoletes [RFC2396], which merged "Uniform Resource
+   Locators" [RFC1738] and "Relative Uniform Resource Locators"
+   [RFC1808] in order to define a single, generic syntax for all URIs.
+   It obsoletes [RFC2732], which introduced syntax for an IPv6 address.
+   It excludes portions of RFC 1738 that defined the specific syntax of
+   individual URI schemes; those portions will be updated as separate
+   documents.  The process for registration of new URI schemes is
+   defined separately by [BCP35].  Advice for designers of new URI
+   schemes can be found in [RFC2718].  All significant changes from RFC
+   2396 are noted in Appendix D.
+
+   This specification uses the terms "character" and "coded character
+   set" in accordance with the definitions provided in [BCP19], and
+   "character encoding" in place of what [BCP19] refers to as a
+   "charset".
+
+1.1.  Overview of URIs
+
+   URIs are characterized as follows:
+
+   Uniform
+
+      Uniformity provides several benefits.  It allows different types
+      of resource identifiers to be used in the same context, even when
+      the mechanisms used to access those resources may differ.  It
+      allows uniform semantic interpretation of common syntactic
+      conventions across different types of resource identifiers.  It
+      allows introduction of new types of resource identifiers without
+      interfering with the way that existing identifiers are used.  It
+      allows the identifiers to be reused in many different contexts,
+      thus permitting new applications or protocols to leverage a pre-
+      existing, large, and widely used set of resource identifiers.
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 4]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   Resource
+
+      This specification does not limit the scope of what might be a
+      resource; rather, the term "resource" is used in a general sense
+      for whatever might be identified by a URI.  Familiar examples
+      include an electronic document, an image, a source of information
+      with a consistent purpose (e.g., "today's weather report for Los
+      Angeles"), a service (e.g., an HTTP-to-SMS gateway), and a
+      collection of other resources.  A resource is not necessarily
+      accessible via the Internet; e.g., human beings, corporations, and
+      bound books in a library can also be resources.  Likewise,
+      abstract concepts can be resources, such as the operators and
+      operands of a mathematical equation, the types of a relationship
+      (e.g., "parent" or "employee"), or numeric values (e.g., zero,
+      one, and infinity).
+
+   Identifier
+
+      An identifier embodies the information required to distinguish
+      what is being identified from all other things within its scope of
+      identification.  Our use of the terms "identify" and "identifying"
+      refer to this purpose of distinguishing one resource from all
+      other resources, regardless of how that purpose is accomplished
+      (e.g., by name, address, or context).  These terms should not be
+      mistaken as an assumption that an identifier defines or embodies
+      the identity of what is referenced, though that may be the case
+      for some identifiers.  Nor should it be assumed that a system
+      using URIs will access the resource identified: in many cases,
+      URIs are used to denote resources without any intention that they
+      be accessed.  Likewise, the "one" resource identified might not be
+      singular in nature (e.g., a resource might be a named set or a
+      mapping that varies over time).
+
+   A URI is an identifier consisting of a sequence of characters
+   matching the syntax rule named <URI> in Section 3.  It enables
+   uniform identification of resources via a separately defined
+   extensible set of naming schemes (Section 3.1).  How that
+   identification is accomplished, assigned, or enabled is delegated to
+   each scheme specification.
+
+   This specification does not place any limits on the nature of a
+   resource, the reasons why an application might seek to refer to a
+   resource, or the kinds of systems that might use URIs for the sake of
+   identifying resources.  This specification does not require that a
+   URI persists in identifying the same resource over time, though that
+   is a common goal of all URI schemes.  Nevertheless, nothing in this
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 5]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   specification prevents an application from limiting itself to
+   particular types of resources, or to a subset of URIs that maintains
+   characteristics desired by that application.
+
+   URIs have a global scope and are interpreted consistently regardless
+   of context, though the result of that interpretation may be in
+   relation to the end-user's context.  For example, "http://localhost/"
+   has the same interpretation for every user of that reference, even
+   though the network interface corresponding to "localhost" may be
+   different for each end-user: interpretation is independent of access.
+   However, an action made on the basis of that reference will take
+   place in relation to the end-user's context, which implies that an
+   action intended to refer to a globally unique thing must use a URI
+   that distinguishes that resource from all other things.  URIs that
+   identify in relation to the end-user's local context should only be
+   used when the context itself is a defining aspect of the resource,
+   such as when an on-line help manual refers to a file on the end-
+   user's file system (e.g., "file:///etc/hosts").
+
+1.1.1.  Generic Syntax
+
+   Each URI begins with a scheme name, as defined in Section 3.1, that
+   refers to a specification for assigning identifiers within that
+   scheme.  As such, the URI syntax is a federated and extensible naming
+   system wherein each scheme's specification may further restrict the
+   syntax and semantics of identifiers using that scheme.
+
+   This specification defines those elements of the URI syntax that are
+   required of all URI schemes or are common to many URI schemes.  It
+   thus defines the syntax and semantics needed to implement a scheme-
+   independent parsing mechanism for URI references, by which the
+   scheme-dependent handling of a URI can be postponed until the
+   scheme-dependent semantics are needed.  Likewise, protocols and data
+   formats that make use of URI references can refer to this
+   specification as a definition for the range of syntax allowed for all
+   URIs, including those schemes that have yet to be defined.  This
+   decouples the evolution of identification schemes from the evolution
+   of protocols, data formats, and implementations that make use of
+   URIs.
+
+   A parser of the generic URI syntax can parse any URI reference into
+   its major components.  Once the scheme is determined, further
+   scheme-specific parsing can be performed on the components.  In other
+   words, the URI generic syntax is a superset of the syntax of all URI
+   schemes.
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 6]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+1.1.2.  Examples
+
+   The following example URIs illustrate several URI schemes and
+   variations in their common syntax components:
+
+      ftp://ftp.is.co.za/rfc/rfc1808.txt
+
+      http://www.ietf.org/rfc/rfc2396.txt
+
+      ldap://[2001:db8::7]/c=GB?objectClass?one
+
+      mailto:[email protected]
+
+      news:comp.infosystems.www.servers.unix
+
+      tel:+1-816-555-1212
+
+      telnet://192.0.2.16:80/
+
+      urn:oasis:names:specification:docbook:dtd:xml:4.1.2
+
+
+1.1.3.  URI, URL, and URN
+
+   A URI can be further classified as a locator, a name, or both.  The
+   term "Uniform Resource Locator" (URL) refers to the subset of URIs
+   that, in addition to identifying a resource, provide a means of
+   locating the resource by describing its primary access mechanism
+   (e.g., its network "location").  The term "Uniform Resource Name"
+   (URN) has been used historically to refer to both URIs under the
+   "urn" scheme [RFC2141], which are required to remain globally unique
+   and persistent even when the resource ceases to exist or becomes
+   unavailable, and to any other URI with the properties of a name.
+
+   An individual scheme does not have to be classified as being just one
+   of "name" or "locator".  Instances of URIs from any given scheme may
+   have the characteristics of names or locators or both, often
+   depending on the persistence and care in the assignment of
+   identifiers by the naming authority, rather than on any quality of
+   the scheme.  Future specifications and related documentation should
+   use the general term "URI" rather than the more restrictive terms
+   "URL" and "URN" [RFC3305].
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 7]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+1.2.  Design Considerations
+
+1.2.1.  Transcription
+
+   The URI syntax has been designed with global transcription as one of
+   its main considerations.  A URI is a sequence of characters from a
+   very limited set: the letters of the basic Latin alphabet, digits,
+   and a few special characters.  A URI may be represented in a variety
+   of ways; e.g., ink on paper, pixels on a screen, or a sequence of
+   character encoding octets.  The interpretation of a URI depends only
+   on the characters used and not on how those characters are
+   represented in a network protocol.
+
+   The goal of transcription can be described by a simple scenario.
+   Imagine two colleagues, Sam and Kim, sitting in a pub at an
+   international conference and exchanging research ideas.  Sam asks Kim
+   for a location to get more information, so Kim writes the URI for the
+   research site on a napkin.  Upon returning home, Sam takes out the
+   napkin and types the URI into a computer, which then retrieves the
+   information to which Kim referred.
+
+   There are several design considerations revealed by the scenario:
+
+   o  A URI is a sequence of characters that is not always represented
+      as a sequence of octets.
+
+   o  A URI might be transcribed from a non-network source and thus
+      should consist of characters that are most likely able to be
+      entered into a computer, within the constraints imposed by
+      keyboards (and related input devices) across languages and
+      locales.
+
+   o  A URI often has to be remembered by people, and it is easier for
+      people to remember a URI when it consists of meaningful or
+      familiar components.
+
+   These design considerations are not always in alignment.  For
+   example, it is often the case that the most meaningful name for a URI
+   component would require characters that cannot be typed into some
+   systems.  The ability to transcribe a resource identifier from one
+   medium to another has been considered more important than having a
+   URI consist of the most meaningful of components.
+
+   In local or regional contexts and with improving technology, users
+   might benefit from being able to use a wider range of characters;
+   such use is not defined by this specification.  Percent-encoded
+   octets (Section 2.1) may be used within a URI to represent characters
+   outside the range of the US-ASCII coded character set if this
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 8]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   representation is allowed by the scheme or by the protocol element in
+   which the URI is referenced.  Such a definition should specify the
+   character encoding used to map those characters to octets prior to
+   being percent-encoded for the URI.
+
+1.2.2.  Separating Identification from Interaction
+
+   A common misunderstanding of URIs is that they are only used to refer
+   to accessible resources.  The URI itself only provides
+   identification; access to the resource is neither guaranteed nor
+   implied by the presence of a URI.  Instead, any operation associated
+   with a URI reference is defined by the protocol element, data format
+   attribute, or natural language text in which it appears.
+
+   Given a URI, a system may attempt to perform a variety of operations
+   on the resource, as might be characterized by words such as "access",
+   "update", "replace", or "find attributes".  Such operations are
+   defined by the protocols that make use of URIs, not by this
+   specification.  However, we do use a few general terms for describing
+   common operations on URIs.  URI "resolution" is the process of
+   determining an access mechanism and the appropriate parameters
+   necessary to dereference a URI; this resolution may require several
+   iterations.  To use that access mechanism to perform an action on the
+   URI's resource is to "dereference" the URI.
+
+   When URIs are used within information retrieval systems to identify
+   sources of information, the most common form of URI dereference is
+   "retrieval": making use of a URI in order to retrieve a
+   representation of its associated resource.  A "representation" is a
+   sequence of octets, along with representation metadata describing
+   those octets, that constitutes a record of the state of the resource
+   at the time when the representation is generated.  Retrieval is
+   achieved by a process that might include using the URI as a cache key
+   to check for a locally cached representation, resolution of the URI
+   to determine an appropriate access mechanism (if any), and
+   dereference of the URI for the sake of applying a retrieval
+   operation.  Depending on the protocols used to perform the retrieval,
+   additional information might be supplied about the resource (resource
+   metadata) and its relation to other resources.
+
+   URI references in information retrieval systems are designed to be
+   late-binding: the result of an access is generally determined when it
+   is accessed and may vary over time or due to other aspects of the
+   interaction.  These references are created in order to be used in the
+   future: what is being identified is not some specific result that was
+   obtained in the past, but rather some characteristic that is expected
+   to be true for future results.  In such cases, the resource referred
+   to by the URI is actually a sameness of characteristics as observed
+
+
+
+Berners-Lee, et al.         Standards Track                     [Page 9]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   over time, perhaps elucidated by additional comments or assertions
+   made by the resource provider.
+
+   Although many URI schemes are named after protocols, this does not
+   imply that use of these URIs will result in access to the resource
+   via the named protocol.  URIs are often used simply for the sake of
+   identification.  Even when a URI is used to retrieve a representation
+   of a resource, that access might be through gateways, proxies,
+   caches, and name resolution services that are independent of the
+   protocol associated with the scheme name.  The resolution of some
+   URIs may require the use of more than one protocol (e.g., both DNS
+   and HTTP are typically used to access an "http" URI's origin server
+   when a representation isn't found in a local cache).
+
+1.2.3.  Hierarchical Identifiers
+
+   The URI syntax is organized hierarchically, with components listed in
+   order of decreasing significance from left to right.  For some URI
+   schemes, the visible hierarchy is limited to the scheme itself:
+   everything after the scheme component delimiter (":") is considered
+   opaque to URI processing.  Other URI schemes make the hierarchy
+   explicit and visible to generic parsing algorithms.
+
+   The generic syntax uses the slash ("/"), question mark ("?"), and
+   number sign ("#") characters to delimit components that are
+   significant to the generic parser's hierarchical interpretation of an
+   identifier.  In addition to aiding the readability of such
+   identifiers through the consistent use of familiar syntax, this
+   uniform representation of hierarchy across naming schemes allows
+   scheme-independent references to be made relative to that hierarchy.
+
+   It is often the case that a group or "tree" of documents has been
+   constructed to serve a common purpose, wherein the vast majority of
+   URI references in these documents point to resources within the tree
+   rather than outside it.  Similarly, documents located at a particular
+   site are much more likely to refer to other resources at that site
+   than to resources at remote sites.  Relative referencing of URIs
+   allows document trees to be partially independent of their location
+   and access scheme.  For instance, it is possible for a single set of
+   hypertext documents to be simultaneously accessible and traversable
+   via each of the "file", "http", and "ftp" schemes if the documents
+   refer to each other with relative references.  Furthermore, such
+   document trees can be moved, as a whole, without changing any of the
+   relative references.
+
+   A relative reference (Section 4.2) refers to a resource by describing
+   the difference within a hierarchical name space between the reference
+   context and the target URI.  The reference resolution algorithm,
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 10]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   presented in Section 5, defines how such a reference is transformed
+   to the target URI.  As relative references can only be used within
+   the context of a hierarchical URI, designers of new URI schemes
+   should use a syntax consistent with the generic syntax's hierarchical
+   components unless there are compelling reasons to forbid relative
+   referencing within that scheme.
+
+      NOTE: Previous specifications used the terms "partial URI" and
+      "relative URI" to denote a relative reference to a URI.  As some
+      readers misunderstood those terms to mean that relative URIs are a
+      subset of URIs rather than a method of referencing URIs, this
+      specification simply refers to them as relative references.
+
+   All URI references are parsed by generic syntax parsers when used.
+   However, because hierarchical processing has no effect on an absolute
+   URI used in a reference unless it contains one or more dot-segments
+   (complete path segments of "." or "..", as described in Section 3.3),
+   URI scheme specifications can define opaque identifiers by
+   disallowing use of slash characters, question mark characters, and
+   the URIs "scheme:." and "scheme:..".
+
+1.3.  Syntax Notation
+
+   This specification uses the Augmented Backus-Naur Form (ABNF)
+   notation of [RFC2234], including the following core ABNF syntax rules
+   defined by that specification: ALPHA (letters), CR (carriage return),
+   DIGIT (decimal digits), DQUOTE (double quote), HEXDIG (hexadecimal
+   digits), LF (line feed), and SP (space).  The complete URI syntax is
+   collected in Appendix A.
+
+2.  Characters
+
+   The URI syntax provides a method of encoding data, presumably for the
+   sake of identifying a resource, as a sequence of characters.  The URI
+   characters are, in turn, frequently encoded as octets for transport
+   or presentation.  This specification does not mandate any particular
+   character encoding for mapping between URI characters and the octets
+   used to store or transmit those characters.  When a URI appears in a
+   protocol element, the character encoding is defined by that protocol;
+   without such a definition, a URI is assumed to be in the same
+   character encoding as the surrounding text.
+
+   The ABNF notation defines its terminal values to be non-negative
+   integers (codepoints) based on the US-ASCII coded character set
+   [ASCII].  Because a URI is a sequence of characters, we must invert
+   that relation in order to understand the URI syntax.  Therefore, the
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 11]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   integer values used by the ABNF must be mapped back to their
+   corresponding characters via US-ASCII in order to complete the syntax
+   rules.
+
+   A URI is composed from a limited set of characters consisting of
+   digits, letters, and a few graphic symbols.  A reserved subset of
+   those characters may be used to delimit syntax components within a
+   URI while the remaining characters, including both the unreserved set
+   and those reserved characters not acting as delimiters, define each
+   component's identifying data.
+
+2.1.  Percent-Encoding
+
+   A percent-encoding mechanism is used to represent a data octet in a
+   component when that octet's corresponding character is outside the
+   allowed set or is being used as a delimiter of, or within, the
+   component.  A percent-encoded octet is encoded as a character
+   triplet, consisting of the percent character "%" followed by the two
+   hexadecimal digits representing that octet's numeric value.  For
+   example, "%20" is the percent-encoding for the binary octet
+   "00100000" (ABNF: %x20), which in US-ASCII corresponds to the space
+   character (SP).  Section 2.4 describes when percent-encoding and
+   decoding is applied.
+
+      pct-encoded = "%" HEXDIG HEXDIG
+
+   The uppercase hexadecimal digits 'A' through 'F' are equivalent to
+   the lowercase digits 'a' through 'f', respectively.  If two URIs
+   differ only in the case of hexadecimal digits used in percent-encoded
+   octets, they are equivalent.  For consistency, URI producers and
+   normalizers should use uppercase hexadecimal digits for all percent-
+   encodings.
+
+2.2.  Reserved Characters
+
+   URIs include components and subcomponents that are delimited by
+   characters in the "reserved" set.  These characters are called
+   "reserved" because they may (or may not) be defined as delimiters by
+   the generic syntax, by each scheme-specific syntax, or by the
+   implementation-specific syntax of a URI's dereferencing algorithm.
+   If data for a URI component would conflict with a reserved
+   character's purpose as a delimiter, then the conflicting data must be
+   percent-encoded before the URI is formed.
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 12]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      reserved    = gen-delims / sub-delims
+
+      gen-delims  = ":" / "/" / "?" / "#" / "[" / "]" / "@"
+
+      sub-delims  = "!" / "$" / "&" / "'" / "(" / ")"
+                  / "*" / "+" / "," / ";" / "="
+
+   The purpose of reserved characters is to provide a set of delimiting
+   characters that are distinguishable from other data within a URI.
+   URIs that differ in the replacement of a reserved character with its
+   corresponding percent-encoded octet are not equivalent.  Percent-
+   encoding a reserved character, or decoding a percent-encoded octet
+   that corresponds to a reserved character, will change how the URI is
+   interpreted by most applications.  Thus, characters in the reserved
+   set are protected from normalization and are therefore safe to be
+   used by scheme-specific and producer-specific algorithms for
+   delimiting data subcomponents within a URI.
+
+   A subset of the reserved characters (gen-delims) is used as
+   delimiters of the generic URI components described in Section 3.  A
+   component's ABNF syntax rule will not use the reserved or gen-delims
+   rule names directly; instead, each syntax rule lists the characters
+   allowed within that component (i.e., not delimiting it), and any of
+   those characters that are also in the reserved set are "reserved" for
+   use as subcomponent delimiters within the component.  Only the most
+   common subcomponents are defined by this specification; other
+   subcomponents may be defined by a URI scheme's specification, or by
+   the implementation-specific syntax of a URI's dereferencing
+   algorithm, provided that such subcomponents are delimited by
+   characters in the reserved set allowed within that component.
+
+   URI producing applications should percent-encode data octets that
+   correspond to characters in the reserved set unless these characters
+   are specifically allowed by the URI scheme to represent data in that
+   component.  If a reserved character is found in a URI component and
+   no delimiting role is known for that character, then it must be
+   interpreted as representing the data octet corresponding to that
+   character's encoding in US-ASCII.
+
+2.3.  Unreserved Characters
+
+   Characters that are allowed in a URI but do not have a reserved
+   purpose are called unreserved.  These include uppercase and lowercase
+   letters, decimal digits, hyphen, period, underscore, and tilde.
+
+      unreserved  = ALPHA / DIGIT / "-" / "." / "_" / "~"
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 13]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   URIs that differ in the replacement of an unreserved character with
+   its corresponding percent-encoded US-ASCII octet are equivalent: they
+   identify the same resource.  However, URI comparison implementations
+   do not always perform normalization prior to comparison (see Section
+   6).  For consistency, percent-encoded octets in the ranges of ALPHA
+   (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E),
+   underscore (%5F), or tilde (%7E) should not be created by URI
+   producers and, when found in a URI, should be decoded to their
+   corresponding unreserved characters by URI normalizers.
+
+2.4.  When to Encode or Decode
+
+   Under normal circumstances, the only time when octets within a URI
+   are percent-encoded is during the process of producing the URI from
+   its component parts.  This is when an implementation determines which
+   of the reserved characters are to be used as subcomponent delimiters
+   and which can be safely used as data.  Once produced, a URI is always
+   in its percent-encoded form.
+
+   When a URI is dereferenced, the components and subcomponents
+   significant to the scheme-specific dereferencing process (if any)
+   must be parsed and separated before the percent-encoded octets within
+   those components can be safely decoded, as otherwise the data may be
+   mistaken for component delimiters.  The only exception is for
+   percent-encoded octets corresponding to characters in the unreserved
+   set, which can be decoded at any time.  For example, the octet
+   corresponding to the tilde ("~") character is often encoded as "%7E"
+   by older URI processing implementations; the "%7E" can be replaced by
+   "~" without changing its interpretation.
+
+   Because the percent ("%") character serves as the indicator for
+   percent-encoded octets, it must be percent-encoded as "%25" for that
+   octet to be used as data within a URI.  Implementations must not
+   percent-encode or decode the same string more than once, as decoding
+   an already decoded string might lead to misinterpreting a percent
+   data octet as the beginning of a percent-encoding, or vice versa in
+   the case of percent-encoding an already percent-encoded string.
+
+2.5.  Identifying Data
+
+   URI characters provide identifying data for each of the URI
+   components, serving as an external interface for identification
+   between systems.  Although the presence and nature of the URI
+   production interface is hidden from clients that use its URIs (and is
+   thus beyond the scope of the interoperability requirements defined by
+   this specification), it is a frequent source of confusion and errors
+   in the interpretation of URI character issues.  Implementers have to
+   be aware that there are multiple character encodings involved in the
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 14]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   production and transmission of URIs: local name and data encoding,
+   public interface encoding, URI character encoding, data format
+   encoding, and protocol encoding.
+
+   Local names, such as file system names, are stored with a local
+   character encoding.  URI producing applications (e.g., origin
+   servers) will typically use the local encoding as the basis for
+   producing meaningful names.  The URI producer will transform the
+   local encoding to one that is suitable for a public interface and
+   then transform the public interface encoding into the restricted set
+   of URI characters (reserved, unreserved, and percent-encodings).
+   Those characters are, in turn, encoded as octets to be used as a
+   reference within a data format (e.g., a document charset), and such
+   data formats are often subsequently encoded for transmission over
+   Internet protocols.
+
+   For most systems, an unreserved character appearing within a URI
+   component is interpreted as representing the data octet corresponding
+   to that character's encoding in US-ASCII.  Consumers of URIs assume
+   that the letter "X" corresponds to the octet "01011000", and even
+   when that assumption is incorrect, there is no harm in making it.  A
+   system that internally provides identifiers in the form of a
+   different character encoding, such as EBCDIC, will generally perform
+   character translation of textual identifiers to UTF-8 [STD63] (or
+   some other superset of the US-ASCII character encoding) at an
+   internal interface, thereby providing more meaningful identifiers
+   than those resulting from simply percent-encoding the original
+   octets.
+
+   For example, consider an information service that provides data,
+   stored locally using an EBCDIC-based file system, to clients on the
+   Internet through an HTTP server.  When an author creates a file with
+   the name "Laguna Beach" on that file system, the "http" URI
+   corresponding to that resource is expected to contain the meaningful
+   string "Laguna%20Beach".  If, however, that server produces URIs by
+   using an overly simplistic raw octet mapping, then the result would
+   be a URI containing "%D3%81%87%A4%95%81@%C2%85%81%83%88".  An
+   internal transcoding interface fixes this problem by transcoding the
+   local name to a superset of US-ASCII prior to producing the URI.
+   Naturally, proper interpretation of an incoming URI on such an
+   interface requires that percent-encoded octets be decoded (e.g.,
+   "%20" to SP) before the reverse transcoding is applied to obtain the
+   local name.
+
+   In some cases, the internal interface between a URI component and the
+   identifying data that it has been crafted to represent is much less
+   direct than a character encoding translation.  For example, portions
+   of a URI might reflect a query on non-ASCII data, or numeric
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 15]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   coordinates on a map.  Likewise, a URI scheme may define components
+   with additional encoding requirements that are applied prior to
+   forming the component and producing the URI.
+
+   When a new URI scheme defines a component that represents textual
+   data consisting of characters from the Universal Character Set [UCS],
+   the data should first be encoded as octets according to the UTF-8
+   character encoding [STD63]; then only those octets that do not
+   correspond to characters in the unreserved set should be percent-
+   encoded.  For example, the character A would be represented as "A",
+   the character LATIN CAPITAL LETTER A WITH GRAVE would be represented
+   as "%C3%80", and the character KATAKANA LETTER A would be represented
+   as "%E3%82%A2".
+
+3.  Syntax Components
+
+   The generic URI syntax consists of a hierarchical sequence of
+   components referred to as the scheme, authority, path, query, and
+   fragment.
+
+      URI         = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
+
+      hier-part   = "//" authority path-abempty
+                  / path-absolute
+                  / path-rootless
+                  / path-empty
+
+   The scheme and path components are required, though the path may be
+   empty (no characters).  When authority is present, the path must
+   either be empty or begin with a slash ("/") character.  When
+   authority is not present, the path cannot begin with two slash
+   characters ("//").  These restrictions result in five different ABNF
+   rules for a path (Section 3.3), only one of which will match any
+   given URI reference.
+
+   The following are two example URIs and their component parts:
+
+         foo://example.com:8042/over/there?name=ferret#nose
+         \_/   \______________/\_________/ \_________/ \__/
+          |           |            |            |        |
+       scheme     authority       path        query   fragment
+          |   _____________________|__
+         / \ /                        \
+         urn:example:animal:ferret:nose
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 16]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+3.1.  Scheme
+
+   Each URI begins with a scheme name that refers to a specification for
+   assigning identifiers within that scheme.  As such, the URI syntax is
+   a federated and extensible naming system wherein each scheme's
+   specification may further restrict the syntax and semantics of
+   identifiers using that scheme.
+
+   Scheme names consist of a sequence of characters beginning with a
+   letter and followed by any combination of letters, digits, plus
+   ("+"), period ("."), or hyphen ("-").  Although schemes are case-
+   insensitive, the canonical form is lowercase and documents that
+   specify schemes must do so with lowercase letters.  An implementation
+   should accept uppercase letters as equivalent to lowercase in scheme
+   names (e.g., allow "HTTP" as well as "http") for the sake of
+   robustness but should only produce lowercase scheme names for
+   consistency.
+
+      scheme      = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
+
+   Individual schemes are not specified by this document.  The process
+   for registration of new URI schemes is defined separately by [BCP35].
+   The scheme registry maintains the mapping between scheme names and
+   their specifications.  Advice for designers of new URI schemes can be
+   found in [RFC2718].  URI scheme specifications must define their own
+   syntax so that all strings matching their scheme-specific syntax will
+   also match the <absolute-URI> grammar, as described in Section 4.3.
+
+   When presented with a URI that violates one or more scheme-specific
+   restrictions, the scheme-specific resolution process should flag the
+   reference as an error rather than ignore the unused parts; doing so
+   reduces the number of equivalent URIs and helps detect abuses of the
+   generic syntax, which might indicate that the URI has been
+   constructed to mislead the user (Section 7.6).
+
+3.2.  Authority
+
+   Many URI schemes include a hierarchical element for a naming
+   authority so that governance of the name space defined by the
+   remainder of the URI is delegated to that authority (which may, in
+   turn, delegate it further).  The generic syntax provides a common
+   means for distinguishing an authority based on a registered name or
+   server address, along with optional port and user information.
+
+   The authority component is preceded by a double slash ("//") and is
+   terminated by the next slash ("/"), question mark ("?"), or number
+   sign ("#") character, or by the end of the URI.
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 17]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      authority   = [ userinfo "@" ] host [ ":" port ]
+
+   URI producers and normalizers should omit the ":" delimiter that
+   separates host from port if the port component is empty.  Some
+   schemes do not allow the userinfo and/or port subcomponents.
+
+   If a URI contains an authority component, then the path component
+   must either be empty or begin with a slash ("/") character.  Non-
+   validating parsers (those that merely separate a URI reference into
+   its major components) will often ignore the subcomponent structure of
+   authority, treating it as an opaque string from the double-slash to
+   the first terminating delimiter, until such time as the URI is
+   dereferenced.
+
+3.2.1.  User Information
+
+   The userinfo subcomponent may consist of a user name and, optionally,
+   scheme-specific information about how to gain authorization to access
+   the resource.  The user information, if present, is followed by a
+   commercial at-sign ("@") that delimits it from the host.
+
+      userinfo    = *( unreserved / pct-encoded / sub-delims / ":" )
+
+   Use of the format "user:password" in the userinfo field is
+   deprecated.  Applications should not render as clear text any data
+   after the first colon (":") character found within a userinfo
+   subcomponent unless the data after the colon is the empty string
+   (indicating no password).  Applications may choose to ignore or
+   reject such data when it is received as part of a reference and
+   should reject the storage of such data in unencrypted form.  The
+   passing of authentication information in clear text has proven to be
+   a security risk in almost every case where it has been used.
+
+   Applications that render a URI for the sake of user feedback, such as
+   in graphical hypertext browsing, should render userinfo in a way that
+   is distinguished from the rest of a URI, when feasible.  Such
+   rendering will assist the user in cases where the userinfo has been
+   misleadingly crafted to look like a trusted domain name
+   (Section 7.6).
+
+3.2.2.  Host
+
+   The host subcomponent of authority is identified by an IP literal
+   encapsulated within square brackets, an IPv4 address in dotted-
+   decimal form, or a registered name.  The host subcomponent is case-
+   insensitive.  The presence of a host subcomponent within a URI does
+   not imply that the scheme requires access to the given host on the
+   Internet.  In many cases, the host syntax is used only for the sake
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 18]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   of reusing the existing registration process created and deployed for
+   DNS, thus obtaining a globally unique name without the cost of
+   deploying another registry.  However, such use comes with its own
+   costs: domain name ownership may change over time for reasons not
+   anticipated by the URI producer.  In other cases, the data within the
+   host component identifies a registered name that has nothing to do
+   with an Internet host.  We use the name "host" for the ABNF rule
+   because that is its most common purpose, not its only purpose.
+
+      host        = IP-literal / IPv4address / reg-name
+
+   The syntax rule for host is ambiguous because it does not completely
+   distinguish between an IPv4address and a reg-name.  In order to
+   disambiguate the syntax, we apply the "first-match-wins" algorithm:
+   If host matches the rule for IPv4address, then it should be
+   considered an IPv4 address literal and not a reg-name.  Although host
+   is case-insensitive, producers and normalizers should use lowercase
+   for registered names and hexadecimal addresses for the sake of
+   uniformity, while only using uppercase letters for percent-encodings.
+
+   A host identified by an Internet Protocol literal address, version 6
+   [RFC3513] or later, is distinguished by enclosing the IP literal
+   within square brackets ("[" and "]").  This is the only place where
+   square bracket characters are allowed in the URI syntax.  In
+   anticipation of future, as-yet-undefined IP literal address formats,
+   an implementation may use an optional version flag to indicate such a
+   format explicitly rather than rely on heuristic determination.
+
+      IP-literal = "[" ( IPv6address / IPvFuture  ) "]"
+
+      IPvFuture  = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
+
+   The version flag does not indicate the IP version; rather, it
+   indicates future versions of the literal format.  As such,
+   implementations must not provide the version flag for the existing
+   IPv4 and IPv6 literal address forms described below.  If a URI
+   containing an IP-literal that starts with "v" (case-insensitive),
+   indicating that the version flag is present, is dereferenced by an
+   application that does not know the meaning of that version flag, then
+   the application should return an appropriate error for "address
+   mechanism not supported".
+
+   A host identified by an IPv6 literal address is represented inside
+   the square brackets without a preceding version flag.  The ABNF
+   provided here is a translation of the text definition of an IPv6
+   literal address provided in [RFC3513].  This syntax does not support
+   IPv6 scoped addressing zone identifiers.
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 19]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   A 128-bit IPv6 address is divided into eight 16-bit pieces.  Each
+   piece is represented numerically in case-insensitive hexadecimal,
+   using one to four hexadecimal digits (leading zeroes are permitted).
+   The eight encoded pieces are given most-significant first, separated
+   by colon characters.  Optionally, the least-significant two pieces
+   may instead be represented in IPv4 address textual format.  A
+   sequence of one or more consecutive zero-valued 16-bit pieces within
+   the address may be elided, omitting all their digits and leaving
+   exactly two consecutive colons in their place to mark the elision.
+
+      IPv6address =                            6( h16 ":" ) ls32
+                  /                       "::" 5( h16 ":" ) ls32
+                  / [               h16 ] "::" 4( h16 ":" ) ls32
+                  / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
+                  / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
+                  / [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
+                  / [ *4( h16 ":" ) h16 ] "::"              ls32
+                  / [ *5( h16 ":" ) h16 ] "::"              h16
+                  / [ *6( h16 ":" ) h16 ] "::"
+
+      ls32        = ( h16 ":" h16 ) / IPv4address
+                  ; least-significant 32 bits of address
+
+      h16         = 1*4HEXDIG
+                  ; 16 bits of address represented in hexadecimal
+
+   A host identified by an IPv4 literal address is represented in
+   dotted-decimal notation (a sequence of four decimal numbers in the
+   range 0 to 255, separated by "."), as described in [RFC1123] by
+   reference to [RFC0952].  Note that other forms of dotted notation may
+   be interpreted on some platforms, as described in Section 7.4, but
+   only the dotted-decimal form of four octets is allowed by this
+   grammar.
+
+      IPv4address = dec-octet "." dec-octet "." dec-octet "." dec-octet
+
+      dec-octet   = DIGIT                 ; 0-9
+                  / %x31-39 DIGIT         ; 10-99
+                  / "1" 2DIGIT            ; 100-199
+                  / "2" %x30-34 DIGIT     ; 200-249
+                  / "25" %x30-35          ; 250-255
+
+   A host identified by a registered name is a sequence of characters
+   usually intended for lookup within a locally defined host or service
+   name registry, though the URI's scheme-specific semantics may require
+   that a specific registry (or fixed name table) be used instead.  The
+   most common name registry mechanism is the Domain Name System (DNS).
+   A registered name intended for lookup in the DNS uses the syntax
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 20]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   defined in Section 3.5 of [RFC1034] and Section 2.1 of [RFC1123].
+   Such a name consists of a sequence of domain labels separated by ".",
+   each domain label starting and ending with an alphanumeric character
+   and possibly also containing "-" characters.  The rightmost domain
+   label of a fully qualified domain name in DNS may be followed by a
+   single "." and should be if it is necessary to distinguish between
+   the complete domain name and some local domain.
+
+      reg-name    = *( unreserved / pct-encoded / sub-delims )
+
+   If the URI scheme defines a default for host, then that default
+   applies when the host subcomponent is undefined or when the
+   registered name is empty (zero length).  For example, the "file" URI
+   scheme is defined so that no authority, an empty host, and
+   "localhost" all mean the end-user's machine, whereas the "http"
+   scheme considers a missing authority or empty host invalid.
+
+   This specification does not mandate a particular registered name
+   lookup technology and therefore does not restrict the syntax of reg-
+   name beyond what is necessary for interoperability.  Instead, it
+   delegates the issue of registered name syntax conformance to the
+   operating system of each application performing URI resolution, and
+   that operating system decides what it will allow for the purpose of
+   host identification.  A URI resolution implementation might use DNS,
+   host tables, yellow pages, NetInfo, WINS, or any other system for
+   lookup of registered names.  However, a globally scoped naming
+   system, such as DNS fully qualified domain names, is necessary for
+   URIs intended to have global scope.  URI producers should use names
+   that conform to the DNS syntax, even when use of DNS is not
+   immediately apparent, and should limit these names to no more than
+   255 characters in length.
+
+   The reg-name syntax allows percent-encoded octets in order to
+   represent non-ASCII registered names in a uniform way that is
+   independent of the underlying name resolution technology.  Non-ASCII
+   characters must first be encoded according to UTF-8 [STD63], and then
+   each octet of the corresponding UTF-8 sequence must be percent-
+   encoded to be represented as URI characters.  URI producing
+   applications must not use percent-encoding in host unless it is used
+   to represent a UTF-8 character sequence.  When a non-ASCII registered
+   name represents an internationalized domain name intended for
+   resolution via the DNS, the name must be transformed to the IDNA
+   encoding [RFC3490] prior to name lookup.  URI producers should
+   provide these registered names in the IDNA encoding, rather than a
+   percent-encoding, if they wish to maximize interoperability with
+   legacy URI resolvers.
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 21]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+3.2.3.  Port
+
+   The port subcomponent of authority is designated by an optional port
+   number in decimal following the host and delimited from it by a
+   single colon (":") character.
+
+      port        = *DIGIT
+
+   A scheme may define a default port.  For example, the "http" scheme
+   defines a default port of "80", corresponding to its reserved TCP
+   port number.  The type of port designated by the port number (e.g.,
+   TCP, UDP, SCTP) is defined by the URI scheme.  URI producers and
+   normalizers should omit the port component and its ":" delimiter if
+   port is empty or if its value would be the same as that of the
+   scheme's default.
+
+3.3.  Path
+
+   The path component contains data, usually organized in hierarchical
+   form, that, along with data in the non-hierarchical query component
+   (Section 3.4), serves to identify a resource within the scope of the
+   URI's scheme and naming authority (if any).  The path is terminated
+   by the first question mark ("?") or number sign ("#") character, or
+   by the end of the URI.
+
+   If a URI contains an authority component, then the path component
+   must either be empty or begin with a slash ("/") character.  If a URI
+   does not contain an authority component, then the path cannot begin
+   with two slash characters ("//").  In addition, a URI reference
+   (Section 4.1) may be a relative-path reference, in which case the
+   first path segment cannot contain a colon (":") character.  The ABNF
+   requires five separate rules to disambiguate these cases, only one of
+   which will match the path substring within a given URI reference.  We
+   use the generic term "path component" to describe the URI substring
+   matched by the parser to one of these rules.
+
+      path          = path-abempty    ; begins with "/" or is empty
+                    / path-absolute   ; begins with "/" but not "//"
+                    / path-noscheme   ; begins with a non-colon segment
+                    / path-rootless   ; begins with a segment
+                    / path-empty      ; zero characters
+
+      path-abempty  = *( "/" segment )
+      path-absolute = "/" [ segment-nz *( "/" segment ) ]
+      path-noscheme = segment-nz-nc *( "/" segment )
+      path-rootless = segment-nz *( "/" segment )
+      path-empty    = 0<pchar>
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 22]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      segment       = *pchar
+      segment-nz    = 1*pchar
+      segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" )
+                    ; non-zero-length segment without any colon ":"
+
+      pchar         = unreserved / pct-encoded / sub-delims / ":" / "@"
+
+   A path consists of a sequence of path segments separated by a slash
+   ("/") character.  A path is always defined for a URI, though the
+   defined path may be empty (zero length).  Use of the slash character
+   to indicate hierarchy is only required when a URI will be used as the
+   context for relative references.  For example, the URI
+   <mailto:[email protected]> has a path of "[email protected]", whereas
+   the URI <foo://info.example.com?fred> has an empty path.
+
+   The path segments "." and "..", also known as dot-segments, are
+   defined for relative reference within the path name hierarchy.  They
+   are intended for use at the beginning of a relative-path reference
+   (Section 4.2) to indicate relative position within the hierarchical
+   tree of names.  This is similar to their role within some operating
+   systems' file directory structures to indicate the current directory
+   and parent directory, respectively.  However, unlike in a file
+   system, these dot-segments are only interpreted within the URI path
+   hierarchy and are removed as part of the resolution process (Section
+   5.2).
+
+   Aside from dot-segments in hierarchical paths, a path segment is
+   considered opaque by the generic syntax.  URI producing applications
+   often use the reserved characters allowed in a segment to delimit
+   scheme-specific or dereference-handler-specific subcomponents.  For
+   example, the semicolon (";") and equals ("=") reserved characters are
+   often used to delimit parameters and parameter values applicable to
+   that segment.  The comma (",") reserved character is often used for
+   similar purposes.  For example, one URI producer might use a segment
+   such as "name;v=1.1" to indicate a reference to version 1.1 of
+   "name", whereas another might use a segment such as "name,1.1" to
+   indicate the same.  Parameter types may be defined by scheme-specific
+   semantics, but in most cases the syntax of a parameter is specific to
+   the implementation of the URI's dereferencing algorithm.
+
+3.4.  Query
+
+   The query component contains non-hierarchical data that, along with
+   data in the path component (Section 3.3), serves to identify a
+   resource within the scope of the URI's scheme and naming authority
+   (if any).  The query component is indicated by the first question
+   mark ("?") character and terminated by a number sign ("#") character
+   or by the end of the URI.
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 23]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      query       = *( pchar / "/" / "?" )
+
+   The characters slash ("/") and question mark ("?") may represent data
+   within the query component.  Beware that some older, erroneous
+   implementations may not handle such data correctly when it is used as
+   the base URI for relative references (Section 5.1), apparently
+   because they fail to distinguish query data from path data when
+   looking for hierarchical separators.  However, as query components
+   are often used to carry identifying information in the form of
+   "key=value" pairs and one frequently used value is a reference to
+   another URI, it is sometimes better for usability to avoid percent-
+   encoding those characters.
+
+3.5.  Fragment
+
+   The fragment identifier component of a URI allows indirect
+   identification of a secondary resource by reference to a primary
+   resource and additional identifying information.  The identified
+   secondary resource may be some portion or subset of the primary
+   resource, some view on representations of the primary resource, or
+   some other resource defined or described by those representations.  A
+   fragment identifier component is indicated by the presence of a
+   number sign ("#") character and terminated by the end of the URI.
+
+      fragment    = *( pchar / "/" / "?" )
+
+   The semantics of a fragment identifier are defined by the set of
+   representations that might result from a retrieval action on the
+   primary resource.  The fragment's format and resolution is therefore
+   dependent on the media type [RFC2046] of a potentially retrieved
+   representation, even though such a retrieval is only performed if the
+   URI is dereferenced.  If no such representation exists, then the
+   semantics of the fragment are considered unknown and are effectively
+   unconstrained.  Fragment identifier semantics are independent of the
+   URI scheme and thus cannot be redefined by scheme specifications.
+
+   Individual media types may define their own restrictions on or
+   structures within the fragment identifier syntax for specifying
+   different types of subsets, views, or external references that are
+   identifiable as secondary resources by that media type.  If the
+   primary resource has multiple representations, as is often the case
+   for resources whose representation is selected based on attributes of
+   the retrieval request (a.k.a., content negotiation), then whatever is
+   identified by the fragment should be consistent across all of those
+   representations.  Each representation should either define the
+   fragment so that it corresponds to the same secondary resource,
+   regardless of how it is represented, or should leave the fragment
+   undefined (i.e., not found).
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 24]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   As with any URI, use of a fragment identifier component does not
+   imply that a retrieval action will take place.  A URI with a fragment
+   identifier may be used to refer to the secondary resource without any
+   implication that the primary resource is accessible or will ever be
+   accessed.
+
+   Fragment identifiers have a special role in information retrieval
+   systems as the primary form of client-side indirect referencing,
+   allowing an author to specifically identify aspects of an existing
+   resource that are only indirectly provided by the resource owner.  As
+   such, the fragment identifier is not used in the scheme-specific
+   processing of a URI; instead, the fragment identifier is separated
+   from the rest of the URI prior to a dereference, and thus the
+   identifying information within the fragment itself is dereferenced
+   solely by the user agent, regardless of the URI scheme.  Although
+   this separate handling is often perceived to be a loss of
+   information, particularly for accurate redirection of references as
+   resources move over time, it also serves to prevent information
+   providers from denying reference authors the right to refer to
+   information within a resource selectively.  Indirect referencing also
+   provides additional flexibility and extensibility to systems that use
+   URIs, as new media types are easier to define and deploy than new
+   schemes of identification.
+
+   The characters slash ("/") and question mark ("?") are allowed to
+   represent data within the fragment identifier.  Beware that some
+   older, erroneous implementations may not handle this data correctly
+   when it is used as the base URI for relative references (Section
+   5.1).
+
+4.  Usage
+
+   When applications make reference to a URI, they do not always use the
+   full form of reference defined by the "URI" syntax rule.  To save
+   space and take advantage of hierarchical locality, many Internet
+   protocol elements and media type formats allow an abbreviation of a
+   URI, whereas others restrict the syntax to a particular form of URI.
+   We define the most common forms of reference syntax in this
+   specification because they impact and depend upon the design of the
+   generic syntax, requiring a uniform parsing algorithm in order to be
+   interpreted consistently.
+
+4.1.  URI Reference
+
+   URI-reference is used to denote the most common usage of a resource
+   identifier.
+
+      URI-reference = URI / relative-ref
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 25]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   A URI-reference is either a URI or a relative reference.  If the
+   URI-reference's prefix does not match the syntax of a scheme followed
+   by its colon separator, then the URI-reference is a relative
+   reference.
+
+   A URI-reference is typically parsed first into the five URI
+   components, in order to determine what components are present and
+   whether the reference is relative.  Then, each component is parsed
+   for its subparts and their validation.  The ABNF of URI-reference,
+   along with the "first-match-wins" disambiguation rule, is sufficient
+   to define a validating parser for the generic syntax.  Readers
+   familiar with regular expressions should see Appendix B for an
+   example of a non-validating URI-reference parser that will take any
+   given string and extract the URI components.
+
+4.2.  Relative Reference
+
+   A relative reference takes advantage of the hierarchical syntax
+   (Section 1.2.3) to express a URI reference relative to the name space
+   of another hierarchical URI.
+
+      relative-ref  = relative-part [ "?" query ] [ "#" fragment ]
+
+      relative-part = "//" authority path-abempty
+                    / path-absolute
+                    / path-noscheme
+                    / path-empty
+
+   The URI referred to by a relative reference, also known as the target
+   URI, is obtained by applying the reference resolution algorithm of
+   Section 5.
+
+   A relative reference that begins with two slash characters is termed
+   a network-path reference; such references are rarely used.  A
+   relative reference that begins with a single slash character is
+   termed an absolute-path reference.  A relative reference that does
+   not begin with a slash character is termed a relative-path reference.
+
+   A path segment that contains a colon character (e.g., "this:that")
+   cannot be used as the first segment of a relative-path reference, as
+   it would be mistaken for a scheme name.  Such a segment must be
+   preceded by a dot-segment (e.g., "./this:that") to make a relative-
+   path reference.
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 26]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+4.3.  Absolute URI
+
+   Some protocol elements allow only the absolute form of a URI without
+   a fragment identifier.  For example, defining a base URI for later
+   use by relative references calls for an absolute-URI syntax rule that
+   does not allow a fragment.
+
+      absolute-URI  = scheme ":" hier-part [ "?" query ]
+
+   URI scheme specifications must define their own syntax so that all
+   strings matching their scheme-specific syntax will also match the
+   <absolute-URI> grammar.  Scheme specifications will not define
+   fragment identifier syntax or usage, regardless of its applicability
+   to resources identifiable via that scheme, as fragment identification
+   is orthogonal to scheme definition.  However, scheme specifications
+   are encouraged to include a wide range of examples, including
+   examples that show use of the scheme's URIs with fragment identifiers
+   when such usage is appropriate.
+
+4.4.  Same-Document Reference
+
+   When a URI reference refers to a URI that is, aside from its fragment
+   component (if any), identical to the base URI (Section 5.1), that
+   reference is called a "same-document" reference.  The most frequent
+   examples of same-document references are relative references that are
+   empty or include only the number sign ("#") separator followed by a
+   fragment identifier.
+
+   When a same-document reference is dereferenced for a retrieval
+   action, the target of that reference is defined to be within the same
+   entity (representation, document, or message) as the reference;
+   therefore, a dereference should not result in a new retrieval action.
+
+   Normalization of the base and target URIs prior to their comparison,
+   as described in Sections 6.2.2 and 6.2.3, is allowed but rarely
+   performed in practice.  Normalization may increase the set of same-
+   document references, which may be of benefit to some caching
+   applications.  As such, reference authors should not assume that a
+   slightly different, though equivalent, reference URI will (or will
+   not) be interpreted as a same-document reference by any given
+   application.
+
+4.5.  Suffix Reference
+
+   The URI syntax is designed for unambiguous reference to resources and
+   extensibility via the URI scheme.  However, as URI identification and
+   usage have become commonplace, traditional media (television, radio,
+   newspapers, billboards, etc.) have increasingly used a suffix of the
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 27]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   URI as a reference, consisting of only the authority and path
+   portions of the URI, such as
+
+      www.w3.org/Addressing/
+
+   or simply a DNS registered name on its own.  Such references are
+   primarily intended for human interpretation rather than for machines,
+   with the assumption that context-based heuristics are sufficient to
+   complete the URI (e.g., most registered names beginning with "www"
+   are likely to have a URI prefix of "http://").  Although there is no
+   standard set of heuristics for disambiguating a URI suffix, many
+   client implementations allow them to be entered by the user and
+   heuristically resolved.
+
+   Although this practice of using suffix references is common, it
+   should be avoided whenever possible and should never be used in
+   situations where long-term references are expected.  The heuristics
+   noted above will change over time, particularly when a new URI scheme
+   becomes popular, and are often incorrect when used out of context.
+   Furthermore, they can lead to security issues along the lines of
+   those described in [RFC1535].
+
+   As a URI suffix has the same syntax as a relative-path reference, a
+   suffix reference cannot be used in contexts where a relative
+   reference is expected.  As a result, suffix references are limited to
+   places where there is no defined base URI, such as dialog boxes and
+   off-line advertisements.
+
+5.  Reference Resolution
+
+   This section defines the process of resolving a URI reference within
+   a context that allows relative references so that the result is a
+   string matching the <URI> syntax rule of Section 3.
+
+5.1.  Establishing a Base URI
+
+   The term "relative" implies that a "base URI" exists against which
+   the relative reference is applied.  Aside from fragment-only
+   references (Section 4.4), relative references are only usable when a
+   base URI is known.  A base URI must be established by the parser
+   prior to parsing URI references that might be relative.  A base URI
+   must conform to the <absolute-URI> syntax rule (Section 4.3).  If the
+   base URI is obtained from a URI reference, then that reference must
+   be converted to absolute form and stripped of any fragment component
+   prior to its use as a base URI.
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 28]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   The base URI of a reference can be established in one of four ways,
+   discussed below in order of precedence.  The order of precedence can
+   be thought of in terms of layers, where the innermost defined base
+   URI has the highest precedence.  This can be visualized graphically
+   as follows:
+
+         .----------------------------------------------------------.
+         |  .----------------------------------------------------.  |
+         |  |  .----------------------------------------------.  |  |
+         |  |  |  .----------------------------------------.  |  |  |
+         |  |  |  |  .----------------------------------.  |  |  |  |
+         |  |  |  |  |       <relative-reference>       |  |  |  |  |
+         |  |  |  |  `----------------------------------'  |  |  |  |
+         |  |  |  | (5.1.1) Base URI embedded in content   |  |  |  |
+         |  |  |  `----------------------------------------'  |  |  |
+         |  |  | (5.1.2) Base URI of the encapsulating entity |  |  |
+         |  |  |         (message, representation, or none)   |  |  |
+         |  |  `----------------------------------------------'  |  |
+         |  | (5.1.3) URI used to retrieve the entity            |  |
+         |  `----------------------------------------------------'  |
+         | (5.1.4) Default Base URI (application-dependent)         |
+         `----------------------------------------------------------'
+
+5.1.1.  Base URI Embedded in Content
+
+   Within certain media types, a base URI for relative references can be
+   embedded within the content itself so that it can be readily obtained
+   by a parser.  This can be useful for descriptive documents, such as
+   tables of contents, which may be transmitted to others through
+   protocols other than their usual retrieval context (e.g., email or
+   USENET news).
+
+   It is beyond the scope of this specification to specify how, for each
+   media type, a base URI can be embedded.  The appropriate syntax, when
+   available, is described by the data format specification associated
+   with each media type.
+
+5.1.2.  Base URI from the Encapsulating Entity
+
+   If no base URI is embedded, the base URI is defined by the
+   representation's retrieval context.  For a document that is enclosed
+   within another entity, such as a message or archive, the retrieval
+   context is that entity.  Thus, the default base URI of a
+   representation is the base URI of the entity in which the
+   representation is encapsulated.
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 29]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   A mechanism for embedding a base URI within MIME container types
+   (e.g., the message and multipart types) is defined by MHTML
+   [RFC2557].  Protocols that do not use the MIME message header syntax,
+   but that do allow some form of tagged metadata to be included within
+   messages, may define their own syntax for defining a base URI as part
+   of a message.
+
+5.1.3.  Base URI from the Retrieval URI
+
+   If no base URI is embedded and the representation is not encapsulated
+   within some other entity, then, if a URI was used to retrieve the
+   representation, that URI shall be considered the base URI.  Note that
+   if the retrieval was the result of a redirected request, the last URI
+   used (i.e., the URI that resulted in the actual retrieval of the
+   representation) is the base URI.
+
+5.1.4.  Default Base URI
+
+   If none of the conditions described above apply, then the base URI is
+   defined by the context of the application.  As this definition is
+   necessarily application-dependent, failing to define a base URI by
+   using one of the other methods may result in the same content being
+   interpreted differently by different types of applications.
+
+   A sender of a representation containing relative references is
+   responsible for ensuring that a base URI for those references can be
+   established.  Aside from fragment-only references, relative
+   references can only be used reliably in situations where the base URI
+   is well defined.
+
+5.2.  Relative Resolution
+
+   This section describes an algorithm for converting a URI reference
+   that might be relative to a given base URI into the parsed components
+   of the reference's target.  The components can then be recomposed, as
+   described in Section 5.3, to form the target URI.  This algorithm
+   provides definitive results that can be used to test the output of
+   other implementations.  Applications may implement relative reference
+   resolution by using some other algorithm, provided that the results
+   match what would be given by this one.
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 30]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+5.2.1.  Pre-parse the Base URI
+
+   The base URI (Base) is established according to the procedure of
+   Section 5.1 and parsed into the five main components described in
+   Section 3.  Note that only the scheme component is required to be
+   present in a base URI; the other components may be empty or
+   undefined.  A component is undefined if its associated delimiter does
+   not appear in the URI reference; the path component is never
+   undefined, though it may be empty.
+
+   Normalization of the base URI, as described in Sections 6.2.2 and
+   6.2.3, is optional.  A URI reference must be transformed to its
+   target URI before it can be normalized.
+
+5.2.2.  Transform References
+
+   For each URI reference (R), the following pseudocode describes an
+   algorithm for transforming R into its target URI (T):
+
+      -- The URI reference is parsed into the five URI components
+      --
+      (R.scheme, R.authority, R.path, R.query, R.fragment) = parse(R);
+
+      -- A non-strict parser may ignore a scheme in the reference
+      -- if it is identical to the base URI's scheme.
+      --
+      if ((not strict) and (R.scheme == Base.scheme)) then
+         undefine(R.scheme);
+      endif;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 31]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      if defined(R.scheme) then
+         T.scheme    = R.scheme;
+         T.authority = R.authority;
+         T.path      = remove_dot_segments(R.path);
+         T.query     = R.query;
+      else
+         if defined(R.authority) then
+            T.authority = R.authority;
+            T.path      = remove_dot_segments(R.path);
+            T.query     = R.query;
+         else
+            if (R.path == "") then
+               T.path = Base.path;
+               if defined(R.query) then
+                  T.query = R.query;
+               else
+                  T.query = Base.query;
+               endif;
+            else
+               if (R.path starts-with "/") then
+                  T.path = remove_dot_segments(R.path);
+               else
+                  T.path = merge(Base.path, R.path);
+                  T.path = remove_dot_segments(T.path);
+               endif;
+               T.query = R.query;
+            endif;
+            T.authority = Base.authority;
+         endif;
+         T.scheme = Base.scheme;
+      endif;
+
+      T.fragment = R.fragment;
+
+5.2.3.  Merge Paths
+
+   The pseudocode above refers to a "merge" routine for merging a
+   relative-path reference with the path of the base URI.  This is
+   accomplished as follows:
+
+   o  If the base URI has a defined authority component and an empty
+      path, then return a string consisting of "/" concatenated with the
+      reference's path; otherwise,
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 32]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   o  return a string consisting of the reference's path component
+      appended to all but the last segment of the base URI's path (i.e.,
+      excluding any characters after the right-most "/" in the base URI
+      path, or excluding the entire base URI path if it does not contain
+      any "/" characters).
+
+5.2.4.  Remove Dot Segments
+
+   The pseudocode also refers to a "remove_dot_segments" routine for
+   interpreting and removing the special "." and ".." complete path
+   segments from a referenced path.  This is done after the path is
+   extracted from a reference, whether or not the path was relative, in
+   order to remove any invalid or extraneous dot-segments prior to
+   forming the target URI.  Although there are many ways to accomplish
+   this removal process, we describe a simple method using two string
+   buffers.
+
+   1.  The input buffer is initialized with the now-appended path
+       components and the output buffer is initialized to the empty
+       string.
+
+   2.  While the input buffer is not empty, loop as follows:
+
+       A.  If the input buffer begins with a prefix of "../" or "./",
+           then remove that prefix from the input buffer; otherwise,
+
+       B.  if the input buffer begins with a prefix of "/./" or "/.",
+           where "." is a complete path segment, then replace that
+           prefix with "/" in the input buffer; otherwise,
+
+       C.  if the input buffer begins with a prefix of "/../" or "/..",
+           where ".." is a complete path segment, then replace that
+           prefix with "/" in the input buffer and remove the last
+           segment and its preceding "/" (if any) from the output
+           buffer; otherwise,
+
+       D.  if the input buffer consists only of "." or "..", then remove
+           that from the input buffer; otherwise,
+
+       E.  move the first path segment in the input buffer to the end of
+           the output buffer, including the initial "/" character (if
+           any) and any subsequent characters up to, but not including,
+           the next "/" character or the end of the input buffer.
+
+   3.  Finally, the output buffer is returned as the result of
+       remove_dot_segments.
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 33]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   Note that dot-segments are intended for use in URI references to
+   express an identifier relative to the hierarchy of names in the base
+   URI.  The remove_dot_segments algorithm respects that hierarchy by
+   removing extra dot-segments rather than treat them as an error or
+   leaving them to be misinterpreted by dereference implementations.
+
+   The following illustrates how the above steps are applied for two
+   examples of merged paths, showing the state of the two buffers after
+   each step.
+
+      STEP   OUTPUT BUFFER         INPUT BUFFER
+
+       1 :                         /a/b/c/./../../g
+       2E:   /a                    /b/c/./../../g
+       2E:   /a/b                  /c/./../../g
+       2E:   /a/b/c                /./../../g
+       2B:   /a/b/c                /../../g
+       2C:   /a/b                  /../g
+       2C:   /a                    /g
+       2E:   /a/g
+
+      STEP   OUTPUT BUFFER         INPUT BUFFER
+
+       1 :                         mid/content=5/../6
+       2E:   mid                   /content=5/../6
+       2E:   mid/content=5         /../6
+       2C:   mid                   /6
+       2E:   mid/6
+
+   Some applications may find it more efficient to implement the
+   remove_dot_segments algorithm by using two segment stacks rather than
+   strings.
+
+      Note: Beware that some older, erroneous implementations will fail
+      to separate a reference's query component from its path component
+      prior to merging the base and reference paths, resulting in an
+      interoperability failure if the query component contains the
+      strings "/../" or "/./".
+
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 34]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+5.3.  Component Recomposition
+
+   Parsed URI components can be recomposed to obtain the corresponding
+   URI reference string.  Using pseudocode, this would be:
+
+      result = ""
+
+      if defined(scheme) then
+         append scheme to result;
+         append ":" to result;
+      endif;
+
+      if defined(authority) then
+         append "//" to result;
+         append authority to result;
+      endif;
+
+      append path to result;
+
+      if defined(query) then
+         append "?" to result;
+         append query to result;
+      endif;
+
+      if defined(fragment) then
+         append "#" to result;
+         append fragment to result;
+      endif;
+
+      return result;
+
+   Note that we are careful to preserve the distinction between a
+   component that is undefined, meaning that its separator was not
+   present in the reference, and a component that is empty, meaning that
+   the separator was present and was immediately followed by the next
+   component separator or the end of the reference.
+
+5.4.  Reference Resolution Examples
+
+   Within a representation with a well defined base URI of
+
+      http://a/b/c/d;p?q
+
+   a relative reference is transformed to its target URI as follows.
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 35]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+5.4.1.  Normal Examples
+
+      "g:h"           =  "g:h"
+      "g"             =  "http://a/b/c/g"
+      "./g"           =  "http://a/b/c/g"
+      "g/"            =  "http://a/b/c/g/"
+      "/g"            =  "http://a/g"
+      "//g"           =  "http://g"
+      "?y"            =  "http://a/b/c/d;p?y"
+      "g?y"           =  "http://a/b/c/g?y"
+      "#s"            =  "http://a/b/c/d;p?q#s"
+      "g#s"           =  "http://a/b/c/g#s"
+      "g?y#s"         =  "http://a/b/c/g?y#s"
+      ";x"            =  "http://a/b/c/;x"
+      "g;x"           =  "http://a/b/c/g;x"
+      "g;x?y#s"       =  "http://a/b/c/g;x?y#s"
+      ""              =  "http://a/b/c/d;p?q"
+      "."             =  "http://a/b/c/"
+      "./"            =  "http://a/b/c/"
+      ".."            =  "http://a/b/"
+      "../"           =  "http://a/b/"
+      "../g"          =  "http://a/b/g"
+      "../.."         =  "http://a/"
+      "../../"        =  "http://a/"
+      "../../g"       =  "http://a/g"
+
+5.4.2.  Abnormal Examples
+
+   Although the following abnormal examples are unlikely to occur in
+   normal practice, all URI parsers should be capable of resolving them
+   consistently.  Each example uses the same base as that above.
+
+   Parsers must be careful in handling cases where there are more ".."
+   segments in a relative-path reference than there are hierarchical
+   levels in the base URI's path.  Note that the ".." syntax cannot be
+   used to change the authority component of a URI.
+
+      "../../../g"    =  "http://a/g"
+      "../../../../g" =  "http://a/g"
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 36]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   Similarly, parsers must remove the dot-segments "." and ".." when
+   they are complete components of a path, but not when they are only
+   part of a segment.
+
+      "/./g"          =  "http://a/g"
+      "/../g"         =  "http://a/g"
+      "g."            =  "http://a/b/c/g."
+      ".g"            =  "http://a/b/c/.g"
+      "g.."           =  "http://a/b/c/g.."
+      "..g"           =  "http://a/b/c/..g"
+
+   Less likely are cases where the relative reference uses unnecessary
+   or nonsensical forms of the "." and ".." complete path segments.
+
+      "./../g"        =  "http://a/b/g"
+      "./g/."         =  "http://a/b/c/g/"
+      "g/./h"         =  "http://a/b/c/g/h"
+      "g/../h"        =  "http://a/b/c/h"
+      "g;x=1/./y"     =  "http://a/b/c/g;x=1/y"
+      "g;x=1/../y"    =  "http://a/b/c/y"
+
+   Some applications fail to separate the reference's query and/or
+   fragment components from the path component before merging it with
+   the base path and removing dot-segments.  This error is rarely
+   noticed, as typical usage of a fragment never includes the hierarchy
+   ("/") character and the query component is not normally used within
+   relative references.
+
+      "g?y/./x"       =  "http://a/b/c/g?y/./x"
+      "g?y/../x"      =  "http://a/b/c/g?y/../x"
+      "g#s/./x"       =  "http://a/b/c/g#s/./x"
+      "g#s/../x"      =  "http://a/b/c/g#s/../x"
+
+   Some parsers allow the scheme name to be present in a relative
+   reference if it is the same as the base URI scheme.  This is
+   considered to be a loophole in prior specifications of partial URI
+   [RFC1630].  Its use should be avoided but is allowed for backward
+   compatibility.
+
+      "http:g"        =  "http:g"         ; for strict parsers
+                      /  "http://a/b/c/g" ; for backward compatibility
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 37]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+6.  Normalization and Comparison
+
+   One of the most common operations on URIs is simple comparison:
+   determining whether two URIs are equivalent without using the URIs to
+   access their respective resource(s).  A comparison is performed every
+   time a response cache is accessed, a browser checks its history to
+   color a link, or an XML parser processes tags within a namespace.
+   Extensive normalization prior to comparison of URIs is often used by
+   spiders and indexing engines to prune a search space or to reduce
+   duplication of request actions and response storage.
+
+   URI comparison is performed for some particular purpose.  Protocols
+   or implementations that compare URIs for different purposes will
+   often be subject to differing design trade-offs in regards to how
+   much effort should be spent in reducing aliased identifiers.  This
+   section describes various methods that may be used to compare URIs,
+   the trade-offs between them, and the types of applications that might
+   use them.
+
+6.1.  Equivalence
+
+   Because URIs exist to identify resources, presumably they should be
+   considered equivalent when they identify the same resource.  However,
+   this definition of equivalence is not of much practical use, as there
+   is no way for an implementation to compare two resources unless it
+   has full knowledge or control of them.  For this reason,
+   determination of equivalence or difference of URIs is based on string
+   comparison, perhaps augmented by reference to additional rules
+   provided by URI scheme definitions.  We use the terms "different" and
+   "equivalent" to describe the possible outcomes of such comparisons,
+   but there are many application-dependent versions of equivalence.
+
+   Even though it is possible to determine that two URIs are equivalent,
+   URI comparison is not sufficient to determine whether two URIs
+   identify different resources.  For example, an owner of two different
+   domain names could decide to serve the same resource from both,
+   resulting in two different URIs.  Therefore, comparison methods are
+   designed to minimize false negatives while strictly avoiding false
+   positives.
+
+   In testing for equivalence, applications should not directly compare
+   relative references; the references should be converted to their
+   respective target URIs before comparison.  When URIs are compared to
+   select (or avoid) a network action, such as retrieval of a
+   representation, fragment components (if any) should be excluded from
+   the comparison.
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 38]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+6.2.  Comparison Ladder
+
+   A variety of methods are used in practice to test URI equivalence.
+   These methods fall into a range, distinguished by the amount of
+   processing required and the degree to which the probability of false
+   negatives is reduced.  As noted above, false negatives cannot be
+   eliminated.  In practice, their probability can be reduced, but this
+   reduction requires more processing and is not cost-effective for all
+   applications.
+
+   If this range of comparison practices is considered as a ladder, the
+   following discussion will climb the ladder, starting with practices
+   that are cheap but have a relatively higher chance of producing false
+   negatives, and proceeding to those that have higher computational
+   cost and lower risk of false negatives.
+
+6.2.1.  Simple String Comparison
+
+   If two URIs, when considered as character strings, are identical,
+   then it is safe to conclude that they are equivalent.  This type of
+   equivalence test has very low computational cost and is in wide use
+   in a variety of applications, particularly in the domain of parsing.
+
+   Testing strings for equivalence requires some basic precautions.
+   This procedure is often referred to as "bit-for-bit" or
+   "byte-for-byte" comparison, which is potentially misleading.  Testing
+   strings for equality is normally based on pair comparison of the
+   characters that make up the strings, starting from the first and
+   proceeding until both strings are exhausted and all characters are
+   found to be equal, until a pair of characters compares unequal, or
+   until one of the strings is exhausted before the other.
+
+   This character comparison requires that each pair of characters be
+   put in comparable form.  For example, should one URI be stored in a
+   byte array in EBCDIC encoding and the second in a Java String object
+   (UTF-16), bit-for-bit comparisons applied naively will produce
+   errors.  It is better to speak of equality on a character-for-
+   character basis rather than on a byte-for-byte or bit-for-bit basis.
+   In practical terms, character-by-character comparisons should be done
+   codepoint-by-codepoint after conversion to a common character
+   encoding.
+
+   False negatives are caused by the production and use of URI aliases.
+   Unnecessary aliases can be reduced, regardless of the comparison
+   method, by consistently providing URI references in an already-
+   normalized form (i.e., a form identical to what would be produced
+   after normalization is applied, as described below).
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 39]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   Protocols and data formats often limit some URI comparisons to simple
+   string comparison, based on the theory that people and
+   implementations will, in their own best interest, be consistent in
+   providing URI references, or at least consistent enough to negate any
+   efficiency that might be obtained from further normalization.
+
+6.2.2.  Syntax-Based Normalization
+
+   Implementations may use logic based on the definitions provided by
+   this specification to reduce the probability of false negatives.
+   This processing is moderately higher in cost than character-for-
+   character string comparison.  For example, an application using this
+   approach could reasonably consider the following two URIs equivalent:
+
+      example://a/b/c/%7Bfoo%7D
+      eXAMPLE://a/./b/../b/%63/%7bfoo%7d
+
+   Web user agents, such as browsers, typically apply this type of URI
+   normalization when determining whether a cached response is
+   available.  Syntax-based normalization includes such techniques as
+   case normalization, percent-encoding normalization, and removal of
+   dot-segments.
+
+6.2.2.1.  Case Normalization
+
+   For all URIs, the hexadecimal digits within a percent-encoding
+   triplet (e.g., "%3a" versus "%3A") are case-insensitive and therefore
+   should be normalized to use uppercase letters for the digits A-F.
+
+   When a URI uses components of the generic syntax, the component
+   syntax equivalence rules always apply; namely, that the scheme and
+   host are case-insensitive and therefore should be normalized to
+   lowercase.  For example, the URI <HTTP://www.EXAMPLE.com/> is
+   equivalent to <http://www.example.com/>.  The other generic syntax
+   components are assumed to be case-sensitive unless specifically
+   defined otherwise by the scheme (see Section 6.2.3).
+
+6.2.2.2.  Percent-Encoding Normalization
+
+   The percent-encoding mechanism (Section 2.1) is a frequent source of
+   variance among otherwise identical URIs.  In addition to the case
+   normalization issue noted above, some URI producers percent-encode
+   octets that do not require percent-encoding, resulting in URIs that
+   are equivalent to their non-encoded counterparts.  These URIs should
+   be normalized by decoding any percent-encoded octet that corresponds
+   to an unreserved character, as described in Section 2.3.
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 40]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+6.2.2.3.  Path Segment Normalization
+
+   The complete path segments "." and ".." are intended only for use
+   within relative references (Section 4.1) and are removed as part of
+   the reference resolution process (Section 5.2).  However, some
+   deployed implementations incorrectly assume that reference resolution
+   is not necessary when the reference is already a URI and thus fail to
+   remove dot-segments when they occur in non-relative paths.  URI
+   normalizers should remove dot-segments by applying the
+   remove_dot_segments algorithm to the path, as described in
+   Section 5.2.4.
+
+6.2.3.  Scheme-Based Normalization
+
+   The syntax and semantics of URIs vary from scheme to scheme, as
+   described by the defining specification for each scheme.
+   Implementations may use scheme-specific rules, at further processing
+   cost, to reduce the probability of false negatives.  For example,
+   because the "http" scheme makes use of an authority component, has a
+   default port of "80", and defines an empty path to be equivalent to
+   "/", the following four URIs are equivalent:
+
+      http://example.com
+      http://example.com/
+      http://example.com:/
+      http://example.com:80/
+
+   In general, a URI that uses the generic syntax for authority with an
+   empty path should be normalized to a path of "/".  Likewise, an
+   explicit ":port", for which the port is empty or the default for the
+   scheme, is equivalent to one where the port and its ":" delimiter are
+   elided and thus should be removed by scheme-based normalization.  For
+   example, the second URI above is the normal form for the "http"
+   scheme.
+
+   Another case where normalization varies by scheme is in the handling
+   of an empty authority component or empty host subcomponent.  For many
+   scheme specifications, an empty authority or host is considered an
+   error; for others, it is considered equivalent to "localhost" or the
+   end-user's host.  When a scheme defines a default for authority and a
+   URI reference to that default is desired, the reference should be
+   normalized to an empty authority for the sake of uniformity, brevity,
+   and internationalization.  If, however, either the userinfo or port
+   subcomponents are non-empty, then the host should be given explicitly
+   even if it matches the default.
+
+   Normalization should not remove delimiters when their associated
+   component is empty unless licensed to do so by the scheme
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 41]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   specification.  For example, the URI "http://example.com/?" cannot be
+   assumed to be equivalent to any of the examples above.  Likewise, the
+   presence or absence of delimiters within a userinfo subcomponent is
+   usually significant to its interpretation.  The fragment component is
+   not subject to any scheme-based normalization; thus, two URIs that
+   differ only by the suffix "#" are considered different regardless of
+   the scheme.
+
+   Some schemes define additional subcomponents that consist of case-
+   insensitive data, giving an implicit license to normalizers to
+   convert this data to a common case (e.g., all lowercase).  For
+   example, URI schemes that define a subcomponent of path to contain an
+   Internet hostname, such as the "mailto" URI scheme, cause that
+   subcomponent to be case-insensitive and thus subject to case
+   normalization (e.g., "mailto:[email protected]" is equivalent to
+   "mailto:[email protected]", even though the generic syntax considers
+   the path component to be case-sensitive).
+
+   Other scheme-specific normalizations are possible.
+
+6.2.4.  Protocol-Based Normalization
+
+   Substantial effort to reduce the incidence of false negatives is
+   often cost-effective for web spiders.  Therefore, they implement even
+   more aggressive techniques in URI comparison.  For example, if they
+   observe that a URI such as
+
+      http://example.com/data
+
+   redirects to a URI differing only in the trailing slash
+
+      http://example.com/data/
+
+   they will likely regard the two as equivalent in the future.  This
+   kind of technique is only appropriate when equivalence is clearly
+   indicated by both the result of accessing the resources and the
+   common conventions of their scheme's dereference algorithm (in this
+   case, use of redirection by HTTP origin servers to avoid problems
+   with relative references).
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 42]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+7.  Security Considerations
+
+   A URI does not in itself pose a security threat.  However, as URIs
+   are often used to provide a compact set of instructions for access to
+   network resources, care must be taken to properly interpret the data
+   within a URI, to prevent that data from causing unintended access,
+   and to avoid including data that should not be revealed in plain
+   text.
+
+7.1.  Reliability and Consistency
+
+   There is no guarantee that once a URI has been used to retrieve
+   information, the same information will be retrievable by that URI in
+   the future.  Nor is there any guarantee that the information
+   retrievable via that URI in the future will be observably similar to
+   that retrieved in the past.  The URI syntax does not constrain how a
+   given scheme or authority apportions its namespace or maintains it
+   over time.  Such guarantees can only be obtained from the person(s)
+   controlling that namespace and the resource in question.  A specific
+   URI scheme may define additional semantics, such as name persistence,
+   if those semantics are required of all naming authorities for that
+   scheme.
+
+7.2.  Malicious Construction
+
+   It is sometimes possible to construct a URI so that an attempt to
+   perform a seemingly harmless, idempotent operation, such as the
+   retrieval of a representation, will in fact cause a possibly damaging
+   remote operation.  The unsafe URI is typically constructed by
+   specifying a port number other than that reserved for the network
+   protocol in question.  The client unwittingly contacts a site running
+   a different protocol service, and data within the URI contains
+   instructions that, when interpreted according to this other protocol,
+   cause an unexpected operation.  A frequent example of such abuse has
+   been the use of a protocol-based scheme with a port component of
+   "25", thereby fooling user agent software into sending an unintended
+   or impersonating message via an SMTP server.
+
+   Applications should prevent dereference of a URI that specifies a TCP
+   port number within the "well-known port" range (0 - 1023) unless the
+   protocol being used to dereference that URI is compatible with the
+   protocol expected on that well-known port.  Although IANA maintains a
+   registry of well-known ports, applications should make such
+   restrictions user-configurable to avoid preventing the deployment of
+   new services.
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 43]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   When a URI contains percent-encoded octets that match the delimiters
+   for a given resolution or dereference protocol (for example, CR and
+   LF characters for the TELNET protocol), these percent-encodings must
+   not be decoded before transmission across that protocol.  Transfer of
+   the percent-encoding, which might violate the protocol, is less
+   harmful than allowing decoded octets to be interpreted as additional
+   operations or parameters, perhaps triggering an unexpected and
+   possibly harmful remote operation.
+
+7.3.  Back-End Transcoding
+
+   When a URI is dereferenced, the data within it is often parsed by
+   both the user agent and one or more servers.  In HTTP, for example, a
+   typical user agent will parse a URI into its five major components,
+   access the authority's server, and send it the data within the
+   authority, path, and query components.  A typical server will take
+   that information, parse the path into segments and the query into
+   key/value pairs, and then invoke implementation-specific handlers to
+   respond to the request.  As a result, a common security concern for
+   server implementations that handle a URI, either as a whole or split
+   into separate components, is proper interpretation of the octet data
+   represented by the characters and percent-encodings within that URI.
+
+   Percent-encoded octets must be decoded at some point during the
+   dereference process.  Applications must split the URI into its
+   components and subcomponents prior to decoding the octets, as
+   otherwise the decoded octets might be mistaken for delimiters.
+   Security checks of the data within a URI should be applied after
+   decoding the octets.  Note, however, that the "%00" percent-encoding
+   (NUL) may require special handling and should be rejected if the
+   application is not expecting to receive raw data within a component.
+
+   Special care should be taken when the URI path interpretation process
+   involves the use of a back-end file system or related system
+   functions.  File systems typically assign an operational meaning to
+   special characters, such as the "/", "\", ":", "[", and "]"
+   characters, and to special device names like ".", "..", "...", "aux",
+   "lpt", etc.  In some cases, merely testing for the existence of such
+   a name will cause the operating system to pause or invoke unrelated
+   system calls, leading to significant security concerns regarding
+   denial of service and unintended data transfer.  It would be
+   impossible for this specification to list all such significant
+   characters and device names.  Implementers should research the
+   reserved names and characters for the types of storage device that
+   may be attached to their applications and restrict the use of data
+   obtained from URI components accordingly.
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 44]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+7.4.  Rare IP Address Formats
+
+   Although the URI syntax for IPv4address only allows the common
+   dotted-decimal form of IPv4 address literal, many implementations
+   that process URIs make use of platform-dependent system routines,
+   such as gethostbyname() and inet_aton(), to translate the string
+   literal to an actual IP address.  Unfortunately, such system routines
+   often allow and process a much larger set of formats than those
+   described in Section 3.2.2.
+
+   For example, many implementations allow dotted forms of three
+   numbers, wherein the last part is interpreted as a 16-bit quantity
+   and placed in the right-most two bytes of the network address (e.g.,
+   a Class B network).  Likewise, a dotted form of two numbers means
+   that the last part is interpreted as a 24-bit quantity and placed in
+   the right-most three bytes of the network address (Class A), and a
+   single number (without dots) is interpreted as a 32-bit quantity and
+   stored directly in the network address.  Adding further to the
+   confusion, some implementations allow each dotted part to be
+   interpreted as decimal, octal, or hexadecimal, as specified in the C
+   language (i.e., a leading 0x or 0X implies hexadecimal; a leading 0
+   implies octal; otherwise, the number is interpreted as decimal).
+
+   These additional IP address formats are not allowed in the URI syntax
+   due to differences between platform implementations.  However, they
+   can become a security concern if an application attempts to filter
+   access to resources based on the IP address in string literal format.
+   If this filtering is performed, literals should be converted to
+   numeric form and filtered based on the numeric value, and not on a
+   prefix or suffix of the string form.
+
+7.5.  Sensitive Information
+
+   URI producers should not provide a URI that contains a username or
+   password that is intended to be secret.  URIs are frequently
+   displayed by browsers, stored in clear text bookmarks, and logged by
+   user agent history and intermediary applications (proxies).  A
+   password appearing within the userinfo component is deprecated and
+   should be considered an error (or simply ignored) except in those
+   rare cases where the 'password' parameter is intended to be public.
+
+7.6.  Semantic Attacks
+
+   Because the userinfo subcomponent is rarely used and appears before
+   the host in the authority component, it can be used to construct a
+   URI intended to mislead a human user by appearing to identify one
+   (trusted) naming authority while actually identifying a different
+   authority hidden behind the noise.  For example
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 45]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      ftp://cnn.example.com&[email protected]/top_story.htm
+
+   might lead a human user to assume that the host is 'cnn.example.com',
+   whereas it is actually '10.0.0.1'.  Note that a misleading userinfo
+   subcomponent could be much longer than the example above.
+
+   A misleading URI, such as that above, is an attack on the user's
+   preconceived notions about the meaning of a URI rather than an attack
+   on the software itself.  User agents may be able to reduce the impact
+   of such attacks by distinguishing the various components of the URI
+   when they are rendered, such as by using a different color or tone to
+   render userinfo if any is present, though there is no panacea.  More
+   information on URI-based semantic attacks can be found in [Siedzik].
+
+8.  IANA Considerations
+
+   URI scheme names, as defined by <scheme> in Section 3.1, form a
+   registered namespace that is managed by IANA according to the
+   procedures defined in [BCP35].  No IANA actions are required by this
+   document.
+
+9.  Acknowledgements
+
+   This specification is derived from RFC 2396 [RFC2396], RFC 1808
+   [RFC1808], and RFC 1738 [RFC1738]; the acknowledgements in those
+   documents still apply.  It also incorporates the update (with
+   corrections) for IPv6 literals in the host syntax, as defined by
+   Robert M. Hinden, Brian E. Carpenter, and Larry Masinter in
+   [RFC2732].  In addition, contributions by Gisle Aas, Reese Anschultz,
+   Daniel Barclay, Tim Bray, Mike Brown, Rob Cameron, Jeremy Carroll,
+   Dan Connolly, Adam M. Costello, John Cowan, Jason Diamond, Martin
+   Duerst, Stefan Eissing, Clive D.W. Feather, Al Gilman, Tony Hammond,
+   Elliotte Harold, Pat Hayes, Henry Holtzman, Ian B. Jacobs, Michael
+   Kay, John C. Klensin, Graham Klyne, Dan Kohn, Bruce Lilly, Andrew
+   Main, Dave McAlpin, Ira McDonald, Michael Mealling, Ray Merkert,
+   Stephen Pollei, Julian Reschke, Tomas Rokicki, Miles Sabin, Kai
+   Schaetzl, Mark Thomson, Ronald Tschalaer, Norm Walsh, Marc Warne,
+   Stuart Williams, and Henry Zongaro are gratefully acknowledged.
+
+10.  References
+
+10.1.  Normative References
+
+   [ASCII]    American National Standards Institute, "Coded Character
+              Set -- 7-bit American Standard Code for Information
+              Interchange", ANSI X3.4, 1986.
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 46]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   [RFC2234]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
+              Specifications: ABNF", RFC 2234, November 1997.
+
+   [STD63]    Yergeau, F., "UTF-8, a transformation format of
+              ISO 10646", STD 63, RFC 3629, November 2003.
+
+   [UCS]      International Organization for Standardization,
+              "Information Technology - Universal Multiple-Octet Coded
+              Character Set (UCS)", ISO/IEC 10646:2003, December 2003.
+
+10.2.  Informative References
+
+   [BCP19]    Freed, N. and J. Postel, "IANA Charset Registration
+              Procedures", BCP 19, RFC 2978, October 2000.
+
+   [BCP35]    Petke, R. and I. King, "Registration Procedures for URL
+              Scheme Names", BCP 35, RFC 2717, November 1999.
+
+   [RFC0952]  Harrenstien, K., Stahl, M., and E. Feinler, "DoD Internet
+              host table specification", RFC 952, October 1985.
+
+   [RFC1034]  Mockapetris, P., "Domain names - concepts and facilities",
+              STD 13, RFC 1034, November 1987.
+
+   [RFC1123]  Braden, R., "Requirements for Internet Hosts - Application
+              and Support", STD 3, RFC 1123, October 1989.
+
+   [RFC1535]  Gavron, E., "A Security Problem and Proposed Correction
+              With Widely Deployed DNS Software", RFC 1535,
+              October 1993.
+
+   [RFC1630]  Berners-Lee, T., "Universal Resource Identifiers in WWW: A
+              Unifying Syntax for the Expression of Names and Addresses
+              of Objects on the Network as used in the World-Wide Web",
+              RFC 1630, June 1994.
+
+   [RFC1736]  Kunze, J., "Functional Recommendations for Internet
+              Resource Locators", RFC 1736, February 1995.
+
+   [RFC1737]  Sollins, K. and L. Masinter, "Functional Requirements for
+              Uniform Resource Names", RFC 1737, December 1994.
+
+   [RFC1738]  Berners-Lee, T., Masinter, L., and M. McCahill, "Uniform
+              Resource Locators (URL)", RFC 1738, December 1994.
+
+   [RFC1808]  Fielding, R., "Relative Uniform Resource Locators",
+              RFC 1808, June 1995.
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 47]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   [RFC2046]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
+              Extensions (MIME) Part Two: Media Types", RFC 2046,
+              November 1996.
+
+   [RFC2141]  Moats, R., "URN Syntax", RFC 2141, May 1997.
+
+   [RFC2396]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
+              Resource Identifiers (URI): Generic Syntax", RFC 2396,
+              August 1998.
+
+   [RFC2518]  Goland, Y., Whitehead, E., Faizi, A., Carter, S., and D.
+              Jensen, "HTTP Extensions for Distributed Authoring --
+              WEBDAV", RFC 2518, February 1999.
+
+   [RFC2557]  Palme, J., Hopmann, A., and N. Shelness, "MIME
+              Encapsulation of Aggregate Documents, such as HTML
+              (MHTML)", RFC 2557, March 1999.
+
+   [RFC2718]  Masinter, L., Alvestrand, H., Zigmond, D., and R. Petke,
+              "Guidelines for new URL Schemes", RFC 2718, November 1999.
+
+   [RFC2732]  Hinden, R., Carpenter, B., and L. Masinter, "Format for
+              Literal IPv6 Addresses in URL's", RFC 2732, December 1999.
+
+   [RFC3305]  Mealling, M. and R. Denenberg, "Report from the Joint
+              W3C/IETF URI Planning Interest Group: Uniform Resource
+              Identifiers (URIs), URLs, and Uniform Resource Names
+              (URNs): Clarifications and Recommendations", RFC 3305,
+              August 2002.
+
+   [RFC3490]  Faltstrom, P., Hoffman, P., and A. Costello,
+              "Internationalizing Domain Names in Applications (IDNA)",
+              RFC 3490, March 2003.
+
+   [RFC3513]  Hinden, R. and S. Deering, "Internet Protocol Version 6
+              (IPv6) Addressing Architecture", RFC 3513, April 2003.
+
+   [Siedzik]  Siedzik, R., "Semantic Attacks: What's in a URL?",
+              April 2001, <http://www.giac.org/practical/gsec/
+              Richard_Siedzik_GSEC.pdf>.
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 48]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+Appendix A.  Collected ABNF for URI
+
+   URI           = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
+
+   hier-part     = "//" authority path-abempty
+                 / path-absolute
+                 / path-rootless
+                 / path-empty
+
+   URI-reference = URI / relative-ref
+
+   absolute-URI  = scheme ":" hier-part [ "?" query ]
+
+   relative-ref  = relative-part [ "?" query ] [ "#" fragment ]
+
+   relative-part = "//" authority path-abempty
+                 / path-absolute
+                 / path-noscheme
+                 / path-empty
+
+   scheme        = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
+
+   authority     = [ userinfo "@" ] host [ ":" port ]
+   userinfo      = *( unreserved / pct-encoded / sub-delims / ":" )
+   host          = IP-literal / IPv4address / reg-name
+   port          = *DIGIT
+
+   IP-literal    = "[" ( IPv6address / IPvFuture  ) "]"
+
+   IPvFuture     = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
+
+   IPv6address   =                            6( h16 ":" ) ls32
+                 /                       "::" 5( h16 ":" ) ls32
+                 / [               h16 ] "::" 4( h16 ":" ) ls32
+                 / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
+                 / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
+                 / [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
+                 / [ *4( h16 ":" ) h16 ] "::"              ls32
+                 / [ *5( h16 ":" ) h16 ] "::"              h16
+                 / [ *6( h16 ":" ) h16 ] "::"
+
+   h16           = 1*4HEXDIG
+   ls32          = ( h16 ":" h16 ) / IPv4address
+   IPv4address   = dec-octet "." dec-octet "." dec-octet "." dec-octet
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 49]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   dec-octet     = DIGIT                 ; 0-9
+                 / %x31-39 DIGIT         ; 10-99
+                 / "1" 2DIGIT            ; 100-199
+                 / "2" %x30-34 DIGIT     ; 200-249
+                 / "25" %x30-35          ; 250-255
+
+   reg-name      = *( unreserved / pct-encoded / sub-delims )
+
+   path          = path-abempty    ; begins with "/" or is empty
+                 / path-absolute   ; begins with "/" but not "//"
+                 / path-noscheme   ; begins with a non-colon segment
+                 / path-rootless   ; begins with a segment
+                 / path-empty      ; zero characters
+
+   path-abempty  = *( "/" segment )
+   path-absolute = "/" [ segment-nz *( "/" segment ) ]
+   path-noscheme = segment-nz-nc *( "/" segment )
+   path-rootless = segment-nz *( "/" segment )
+   path-empty    = 0<pchar>
+
+   segment       = *pchar
+   segment-nz    = 1*pchar
+   segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" )
+                 ; non-zero-length segment without any colon ":"
+
+   pchar         = unreserved / pct-encoded / sub-delims / ":" / "@"
+
+   query         = *( pchar / "/" / "?" )
+
+   fragment      = *( pchar / "/" / "?" )
+
+   pct-encoded   = "%" HEXDIG HEXDIG
+
+   unreserved    = ALPHA / DIGIT / "-" / "." / "_" / "~"
+   reserved      = gen-delims / sub-delims
+   gen-delims    = ":" / "/" / "?" / "#" / "[" / "]" / "@"
+   sub-delims    = "!" / "$" / "&" / "'" / "(" / ")"
+                 / "*" / "+" / "," / ";" / "="
+
+Appendix B.  Parsing a URI Reference with a Regular Expression
+
+   As the "first-match-wins" algorithm is identical to the "greedy"
+   disambiguation method used by POSIX regular expressions, it is
+   natural and commonplace to use a regular expression for parsing the
+   potential five components of a URI reference.
+
+   The following line is the regular expression for breaking-down a
+   well-formed URI reference into its components.
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 50]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      ^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?
+       12            3  4          5       6  7        8 9
+
+   The numbers in the second line above are only to assist readability;
+   they indicate the reference points for each subexpression (i.e., each
+   paired parenthesis).  We refer to the value matched for subexpression
+   <n> as $<n>.  For example, matching the above expression to
+
+      http://www.ics.uci.edu/pub/ietf/uri/#Related
+
+   results in the following subexpression matches:
+
+      $1 = http:
+      $2 = http
+      $3 = //www.ics.uci.edu
+      $4 = www.ics.uci.edu
+      $5 = /pub/ietf/uri/
+      $6 = <undefined>
+      $7 = <undefined>
+      $8 = #Related
+      $9 = Related
+
+   where <undefined> indicates that the component is not present, as is
+   the case for the query component in the above example.  Therefore, we
+   can determine the value of the five components as
+
+      scheme    = $2
+      authority = $4
+      path      = $5
+      query     = $7
+      fragment  = $9
+
+   Going in the opposite direction, we can recreate a URI reference from
+   its components by using the algorithm of Section 5.3.
+
+Appendix C.  Delimiting a URI in Context
+
+   URIs are often transmitted through formats that do not provide a
+   clear context for their interpretation.  For example, there are many
+   occasions when a URI is included in plain text; examples include text
+   sent in email, USENET news, and on printed paper.  In such cases, it
+   is important to be able to delimit the URI from the rest of the text,
+   and in particular from punctuation marks that might be mistaken for
+   part of the URI.
+
+   In practice, URIs are delimited in a variety of ways, but usually
+   within double-quotes "http://example.com/", angle brackets
+   <http://example.com/>, or just by using whitespace:
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 51]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      http://example.com/
+
+   These wrappers do not form part of the URI.
+
+   In some cases, extra whitespace (spaces, line-breaks, tabs, etc.) may
+   have to be added to break a long URI across lines.  The whitespace
+   should be ignored when the URI is extracted.
+
+   No whitespace should be introduced after a hyphen ("-") character.
+   Because some typesetters and printers may (erroneously) introduce a
+   hyphen at the end of line when breaking it, the interpreter of a URI
+   containing a line break immediately after a hyphen should ignore all
+   whitespace around the line break and should be aware that the hyphen
+   may or may not actually be part of the URI.
+
+   Using <> angle brackets around each URI is especially recommended as
+   a delimiting style for a reference that contains embedded whitespace.
+
+   The prefix "URL:" (with or without a trailing space) was formerly
+   recommended as a way to help distinguish a URI from other bracketed
+   designators, though it is not commonly used in practice and is no
+   longer recommended.
+
+   For robustness, software that accepts user-typed URI should attempt
+   to recognize and strip both delimiters and embedded whitespace.
+
+   For example, the text
+
+      Yes, Jim, I found it under "http://www.w3.org/Addressing/",
+      but you can probably pick it up from <ftp://foo.example.
+      com/rfc/>.  Note the warning in <http://www.ics.uci.edu/pub/
+      ietf/uri/historical.html#WARNING>.
+
+   contains the URI references
+
+      http://www.w3.org/Addressing/
+      ftp://foo.example.com/rfc/
+      http://www.ics.uci.edu/pub/ietf/uri/historical.html#WARNING
+
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 52]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+Appendix D.  Changes from RFC 2396
+
+D.1.  Additions
+
+   An ABNF rule for URI has been introduced to correspond to one common
+   usage of the term: an absolute URI with optional fragment.
+
+   IPv6 (and later) literals have been added to the list of possible
+   identifiers for the host portion of an authority component, as
+   described by [RFC2732], with the addition of "[" and "]" to the
+   reserved set and a version flag to anticipate future versions of IP
+   literals.  Square brackets are now specified as reserved within the
+   authority component and are not allowed outside their use as
+   delimiters for an IP literal within host.  In order to make this
+   change without changing the technical definition of the path, query,
+   and fragment components, those rules were redefined to directly
+   specify the characters allowed.
+
+   As [RFC2732] defers to [RFC3513] for definition of an IPv6 literal
+   address, which, unfortunately, lacks an ABNF description of
+   IPv6address, we created a new ABNF rule for IPv6address that matches
+   the text representations defined by Section 2.2 of [RFC3513].
+   Likewise, the definition of IPv4address has been improved in order to
+   limit each decimal octet to the range 0-255.
+
+   Section 6, on URI normalization and comparison, has been completely
+   rewritten and extended by using input from Tim Bray and discussion
+   within the W3C Technical Architecture Group.
+
+D.2.  Modifications
+
+   The ad-hoc BNF syntax of RFC 2396 has been replaced with the ABNF of
+   [RFC2234].  This change required all rule names that formerly
+   included underscore characters to be renamed with a dash instead.  In
+   addition, a number of syntax rules have been eliminated or simplified
+   to make the overall grammar more comprehensible.  Specifications that
+   refer to the obsolete grammar rules may be understood by replacing
+   those rules according to the following table:
+
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 53]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   +----------------+--------------------------------------------------+
+   | obsolete rule  | translation                                      |
+   +----------------+--------------------------------------------------+
+   | absoluteURI    | absolute-URI                                     |
+   | relativeURI    | relative-part [ "?" query ]                      |
+   | hier_part      | ( "//" authority path-abempty /                  |
+   |                | path-absolute ) [ "?" query ]                    |
+   |                |                                                  |
+   | opaque_part    | path-rootless [ "?" query ]                      |
+   | net_path       | "//" authority path-abempty                      |
+   | abs_path       | path-absolute                                    |
+   | rel_path       | path-rootless                                    |
+   | rel_segment    | segment-nz-nc                                    |
+   | reg_name       | reg-name                                         |
+   | server         | authority                                        |
+   | hostport       | host [ ":" port ]                                |
+   | hostname       | reg-name                                         |
+   | path_segments  | path-abempty                                     |
+   | param          | *<pchar excluding ";">                           |
+   |                |                                                  |
+   | uric           | unreserved / pct-encoded / ";" / "?" / ":"       |
+   |                |  / "@" / "&" / "=" / "+" / "$" / "," / "/"       |
+   |                |                                                  |
+   | uric_no_slash  | unreserved / pct-encoded / ";" / "?" / ":"       |
+   |                |  / "@" / "&" / "=" / "+" / "$" / ","             |
+   |                |                                                  |
+   | mark           | "-" / "_" / "." / "!" / "~" / "*" / "'"          |
+   |                |  / "(" / ")"                                     |
+   |                |                                                  |
+   | escaped        | pct-encoded                                      |
+   | hex            | HEXDIG                                           |
+   | alphanum       | ALPHA / DIGIT                                    |
+   +----------------+--------------------------------------------------+
+
+   Use of the above obsolete rules for the definition of scheme-specific
+   syntax is deprecated.
+
+   Section 2, on characters, has been rewritten to explain what
+   characters are reserved, when they are reserved, and why they are
+   reserved, even when they are not used as delimiters by the generic
+   syntax.  The mark characters that are typically unsafe to decode,
+   including the exclamation mark ("!"), asterisk ("*"), single-quote
+   ("'"), and open and close parentheses ("(" and ")"), have been moved
+   to the reserved set in order to clarify the distinction between
+   reserved and unreserved and, hopefully, to answer the most common
+   question of scheme designers.  Likewise, the section on
+   percent-encoded characters has been rewritten, and URI normalizers
+   are now given license to decode any percent-encoded octets
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 54]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   corresponding to unreserved characters.  In general, the terms
+   "escaped" and "unescaped" have been replaced with "percent-encoded"
+   and "decoded", respectively, to reduce confusion with other forms of
+   escape mechanisms.
+
+   The ABNF for URI and URI-reference has been redesigned to make them
+   more friendly to LALR parsers and to reduce complexity.  As a result,
+   the layout form of syntax description has been removed, along with
+   the uric, uric_no_slash, opaque_part, net_path, abs_path, rel_path,
+   path_segments, rel_segment, and mark rules.  All references to
+   "opaque" URIs have been replaced with a better description of how the
+   path component may be opaque to hierarchy.  The relativeURI rule has
+   been replaced with relative-ref to avoid unnecessary confusion over
+   whether they are a subset of URI.  The ambiguity regarding the
+   parsing of URI-reference as a URI or a relative-ref with a colon in
+   the first segment has been eliminated through the use of five
+   separate path matching rules.
+
+   The fragment identifier has been moved back into the section on
+   generic syntax components and within the URI and relative-ref rules,
+   though it remains excluded from absolute-URI.  The number sign ("#")
+   character has been moved back to the reserved set as a result of
+   reintegrating the fragment syntax.
+
+   The ABNF has been corrected to allow the path component to be empty.
+   This also allows an absolute-URI to consist of nothing after the
+   "scheme:", as is present in practice with the "dav:" namespace
+   [RFC2518] and with the "about:" scheme used internally by many WWW
+   browser implementations.  The ambiguity regarding the boundary
+   between authority and path has been eliminated through the use of
+   five separate path matching rules.
+
+   Registry-based naming authorities that use the generic syntax are now
+   defined within the host rule.  This change allows current
+   implementations, where whatever name provided is simply fed to the
+   local name resolution mechanism, to be consistent with the
+   specification.  It also removes the need to re-specify DNS name
+   formats here.  Furthermore, it allows the host component to contain
+   percent-encoded octets, which is necessary to enable
+   internationalized domain names to be provided in URIs, processed in
+   their native character encodings at the application layers above URI
+   processing, and passed to an IDNA library as a registered name in the
+   UTF-8 character encoding.  The server, hostport, hostname,
+   domainlabel, toplabel, and alphanum rules have been removed.
+
+   The resolving relative references algorithm of [RFC2396] has been
+   rewritten with pseudocode for this revision to improve clarity and
+   fix the following issues:
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 55]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   o  [RFC2396] section 5.2, step 6a, failed to account for a base URI
+      with no path.
+
+   o  Restored the behavior of [RFC1808] where, if the reference
+      contains an empty path and a defined query component, the target
+      URI inherits the base URI's path component.
+
+   o  The determination of whether a URI reference is a same-document
+      reference has been decoupled from the URI parser, simplifying the
+      URI processing interface within applications in a way consistent
+      with the internal architecture of deployed URI processing
+      implementations.  The determination is now based on comparison to
+      the base URI after transforming a reference to absolute form,
+      rather than on the format of the reference itself.  This change
+      may result in more references being considered "same-document"
+      under this specification than there would be under the rules given
+      in RFC 2396, especially when normalization is used to reduce
+      aliases.  However, it does not change the status of existing
+      same-document references.
+
+   o  Separated the path merge routine into two routines: merge, for
+      describing combination of the base URI path with a relative-path
+      reference, and remove_dot_segments, for describing how to remove
+      the special "." and ".." segments from a composed path.  The
+      remove_dot_segments algorithm is now applied to all URI reference
+      paths in order to match common implementations and to improve the
+      normalization of URIs in practice.  This change only impacts the
+      parsing of abnormal references and same-scheme references wherein
+      the base URI has a non-hierarchical path.
+
+Index
+
+   A
+      ABNF  11
+      absolute  27
+      absolute-path  26
+      absolute-URI  27
+      access  9
+      authority  17, 18
+
+   B
+      base URI  28
+
+   C
+      character encoding  4
+      character  4
+      characters  8, 11
+      coded character set  4
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 56]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+   D
+      dec-octet  20
+      dereference  9
+      dot-segments  23
+
+   F
+      fragment  16, 24
+
+   G
+      gen-delims  13
+      generic syntax  6
+
+   H
+      h16  20
+      hier-part  16
+      hierarchical  10
+      host  18
+
+   I
+      identifier  5
+      IP-literal  19
+      IPv4  20
+      IPv4address  19, 20
+      IPv6  19
+      IPv6address  19, 20
+      IPvFuture  19
+
+   L
+      locator  7
+      ls32  20
+
+   M
+      merge  32
+
+   N
+      name  7
+      network-path  26
+
+   P
+      path  16, 22, 26
+         path-abempty  22
+         path-absolute  22
+         path-empty  22
+         path-noscheme  22
+         path-rootless  22
+      path-abempty  16, 22, 26
+      path-absolute  16, 22, 26
+      path-empty  16, 22, 26
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 57]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+      path-rootless  16, 22
+      pchar  23
+      pct-encoded  12
+      percent-encoding  12
+      port  22
+
+   Q
+      query  16, 23
+
+   R
+      reg-name  21
+      registered name  20
+      relative  10, 28
+      relative-path  26
+      relative-ref  26
+      remove_dot_segments  33
+      representation  9
+      reserved  12
+      resolution  9, 28
+      resource  5
+      retrieval  9
+
+   S
+      same-document  27
+      sameness  9
+      scheme  16, 17
+      segment  22, 23
+         segment-nz  23
+         segment-nz-nc  23
+      sub-delims  13
+      suffix  27
+
+   T
+      transcription  8
+
+   U
+      uniform  4
+      unreserved  13
+      URI grammar
+         absolute-URI  27
+         ALPHA  11
+         authority  18
+         CR  11
+         dec-octet  20
+         DIGIT  11
+         DQUOTE  11
+         fragment  24
+         gen-delims  13
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 58]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+         h16  20
+         HEXDIG  11
+         hier-part  16
+         host  19
+         IP-literal  19
+         IPv4address  20
+         IPv6address  20
+         IPvFuture  19
+         LF  11
+         ls32  20
+         OCTET  11
+         path  22
+         path-abempty  22
+         path-absolute  22
+         path-empty  22
+         path-noscheme  22
+         path-rootless  22
+         pchar  23
+         pct-encoded  12
+         port  22
+         query  24
+         reg-name  21
+         relative-ref  26
+         reserved  13
+         scheme  17
+         segment  23
+         segment-nz  23
+         segment-nz-nc  23
+         SP  11
+         sub-delims  13
+         unreserved  13
+         URI  16
+         URI-reference  25
+         userinfo  18
+      URI  16
+      URI-reference  25
+      URL  7
+      URN  7
+      userinfo  18
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 59]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+Authors' Addresses
+
+   Tim Berners-Lee
+   World Wide Web Consortium
+   Massachusetts Institute of Technology
+   77 Massachusetts Avenue
+   Cambridge, MA  02139
+   USA
+
+   Phone: +1-617-253-5702
+   Fax:   +1-617-258-5999
+   EMail: [email protected]
+   URI:   http://www.w3.org/People/Berners-Lee/
+
+
+   Roy T. Fielding
+   Day Software
+   5251 California Ave., Suite 110
+   Irvine, CA  92617
+   USA
+
+   Phone: +1-949-679-2960
+   Fax:   +1-949-679-2972
+   EMail: [email protected]
+   URI:   http://roy.gbiv.com/
+
+
+   Larry Masinter
+   Adobe Systems Incorporated
+   345 Park Ave
+   San Jose, CA  95110
+   USA
+
+   Phone: +1-408-536-3024
+   EMail: [email protected]
+   URI:   http://larry.masinter.net/
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 60]
+
+RFC 3986                   URI Generic Syntax               January 2005
+
+
+Full Copyright Statement
+
+   Copyright (C) The Internet Society (2005).
+
+   This document is subject to the rights, licenses and restrictions
+   contained in BCP 78, and except as set forth therein, the authors
+   retain all their rights.
+
+   This document and the information contained herein are provided on an
+   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
+   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
+   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
+   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
+   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
+   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+Intellectual Property
+
+   The IETF takes no position regarding the validity or scope of any
+   Intellectual Property Rights or other rights that might be claimed to
+   pertain to the implementation or use of the technology described in
+   this document or the extent to which any license under such rights
+   might or might not be available; nor does it represent that it has
+   made any independent effort to identify any such rights.  Information
+   on the IETF's procedures with respect to rights in IETF Documents can
+   be found in BCP 78 and BCP 79.
+
+   Copies of IPR disclosures made to the IETF Secretariat and any
+   assurances of licenses to be made available, or the result of an
+   attempt made to obtain a general license or permission for the use of
+   such proprietary rights by implementers or users of this
+   specification can be obtained from the IETF on-line IPR repository at
+   http://www.ietf.org/ipr.
+
+   The IETF invites any interested party to bring to its attention any
+   copyrights, patents or patent applications, or other proprietary
+   rights that may cover technology that may be required to implement
+   this standard.  Please address the information to the IETF at ietf-
+   [email protected].
+
+
+Acknowledgement
+
+   Funding for the RFC Editor function is currently provided by the
+   Internet Society.
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 61]
+
diff --git a/lib/inets/doc/src/ftp.xml b/lib/inets/doc/src/ftp.xml
index ca902d8d9d..f8f11ec705 100644
--- a/lib/inets/doc/src/ftp.xml
+++ b/lib/inets/doc/src/ftp.xml
@@ -1,10 +1,10 @@
-<?xml version="1.0" encoding="latin1" ?>
+<?xml version="1.0" encoding="iso-8859-1" ?>
 <!DOCTYPE erlref SYSTEM "erlref.dtd">
 
 <erlref>
   <header>
     <copyright>
-      <year>1997</year><year>2010</year>
+      <year>1997</year><year>2011</year>
       <holder>Ericsson AB. All Rights Reserved.</holder>
     </copyright>
     <legalnotice>
@@ -141,11 +141,21 @@
       <tag>{timeout, Timeout}</tag>
       <item>
         <marker id="timeout"></marker>
-	<p>Timeout = <c>integer() >= 0</c> </p>
+	<p>Timeout = <c>non_neg_integer()</c> </p>
 	<p>Connection timeout. </p>
 	<p>Default is 60000 (milliseconds). </p>
       </item>
 
+      <tag>{dtimeout, DTimeout}</tag>
+      <item>
+        <marker id="dtimeout"></marker>
+	<p>DTimeout = <c>non_neg_integer() | infinity</c> </p>
+	<p>Data Connect timeout. 
+	The time the client will wait for the server to connect to the 
+	data socket. </p>
+	<p>Default is infinity. </p>
+      </item>
+
       <tag>{progress, Progress}</tag>
       <item>
         <marker id="progress"></marker>
@@ -542,11 +552,12 @@
 	<v>verbose() = boolean() (defaults to false)</v>
 	<v>debug() = disable | debug | trace (defaults to disable)</v>
 	<!-- <v>open_options() = [open_option()]</v> -->
-	<v>open_option() = {ipfamily, ipfamily()} | {port, port()} | {mode, mode()} | {timeout, timeout()} | {progress, progress()}</v>
+	<v>open_option() = {ipfamily, ipfamily()} | {port, port()} | {mode, mode()} | {timeout, timeout()} | {dtimeout, dtimeout()} | {progress, progress()}</v>
 	<v>ipfamily() = inet | inet6 | inet6fb4 (defaults to inet)</v>
 	<v>port() = integer() > 0 (defaults to 21)</v>
 	<v>mode() = active | passive (defaults to passive)</v>
-	<v>timeout() = integer() >= 0 (defaults to 60000 milliseconds)</v>
+	<v>timeout() = integer() > 0 (defaults to 60000 milliseconds)</v>
+	<v>dtimeout() = integer() > 0 | infinity (defaults to infinity)</v>
 	<v>pogress() = ignore | {module(), function(), initial_data()} (defaults to ignore)</v>
 	<v>module() = atom()</v>
 	<v>function() = atom()</v>
diff --git a/lib/inets/doc/src/notes.xml b/lib/inets/doc/src/notes.xml
index 87a8c173a5..79b7dfab4a 100644
--- a/lib/inets/doc/src/notes.xml
+++ b/lib/inets/doc/src/notes.xml
@@ -35,17 +35,22 @@
   <section><title>Inets 5.8</title>
 
     <section><title>Improvements and New Features</title>
+<!--
     <p>-</p>
+-->
 
-<!--
       <list>
         <item>
-          <p>[httpc|httpd] Added support for IPv6 with ssl. </p>
-	  <p>Own Id: OTP-5566</p>
+          <p>[ftpc] Add a config option to specify a 
+	  <seealso marker="ftp#dtimeout">data connect timeout</seealso>.
+	  That is how long the ftp client will wait for the server to connect
+	  to the data socket. If this timeout occurs, an error will be 
+	  returned to the caller and the ftp client process will be 
+	  terminated. </p>
+	  <p>Own Id: OTP-9545</p>
         </item>
 
       </list>
--->
 
     </section>
 
diff --git a/lib/inets/src/ftp/ftp.erl b/lib/inets/src/ftp/ftp.erl
index ac72963347..b6da92947c 100644
--- a/lib/inets/src/ftp/ftp.erl
+++ b/lib/inets/src/ftp/ftp.erl
@@ -55,9 +55,10 @@
 -include("ftp_internal.hrl").
 
 %% Constante used in internal state definition
--define(CONNECTION_TIMEOUT, 60*1000).
--define(DEFAULT_MODE,       passive).
--define(PROGRESS_DEFAULT,   ignore).
+-define(CONNECTION_TIMEOUT,  60*1000).
+-define(DATA_ACCEPT_TIMEOUT, infinity).
+-define(DEFAULT_MODE,        passive).
+-define(PROGRESS_DEFAULT,    ignore).
 
 %% Internal Constants
 -define(FTP_PORT, 21).
@@ -88,7 +89,8 @@
 	  %% data needed further on.
 	  caller = undefined, % term()     
 	  ipfamily,     % inet | inet6 | inet6fb4
-	  progress = ignore   % ignore | pid()	    
+	  progress = ignore,   % ignore | pid()	    
+	  dtimeout = ?DATA_ACCEPT_TIMEOUT  % non_neg_integer() | infinity
 	 }).
 
 
@@ -847,6 +849,7 @@ start_options(Options) ->
 %%    host
 %%    port
 %%    timeout
+%%    dtimeout
 %%    progress
 open_options(Options) ->
     ?fcrt("open_options", [{options, Options}]), 
@@ -875,7 +878,12 @@ open_options(Options) ->
 	   (_) -> false
 	end,
     ValidateTimeout = 
-	fun(Timeout) when is_integer(Timeout) andalso (Timeout > 0) -> true;
+	fun(Timeout) when is_integer(Timeout) andalso (Timeout >= 0) -> true;
+	   (_) -> false
+	end,
+    ValidateDTimeout = 
+	fun(DTimeout) when is_integer(DTimeout) andalso (DTimeout >= 0) -> true;
+	   (infinity) -> true;
 	   (_) -> false
 	end,
     ValidateProgress = 
@@ -893,6 +901,7 @@ open_options(Options) ->
 	 {port,     ValidatePort,     false, ?FTP_PORT},
 	 {ipfamily, ValidateIpFamily, false, inet},
 	 {timeout,  ValidateTimeout,  false, ?CONNECTION_TIMEOUT}, 
+	 {dtimeout, ValidateDTimeout, false, ?DATA_ACCEPT_TIMEOUT}, 
 	 {progress, ValidateProgress, false, ?PROGRESS_DEFAULT}], 
     validate_options(Options, ValidOptions, []).
 
@@ -1037,13 +1046,15 @@ handle_call({_, {open, ip_comm, Opts}}, From, State) ->
 	    Mode     = key_search(mode,     Opts, ?DEFAULT_MODE),
 	    Port     = key_search(port,     Opts, ?FTP_PORT), 
 	    Timeout  = key_search(timeout,  Opts, ?CONNECTION_TIMEOUT),
+	    DTimeout = key_search(dtimeout, Opts, ?DATA_ACCEPT_TIMEOUT),
 	    Progress = key_search(progress, Opts, ignore),
 	    IpFamily = key_search(ipfamily, Opts, inet),
-	    
+
 	    State2 = State#state{client   = From, 
 				 mode     = Mode,
 				 progress = progress(Progress),
-				 ipfamily = IpFamily}, 
+				 ipfamily = IpFamily, 
+				 dtimeout = DTimeout}, 
 
 	    ?fcrd("handle_call(open) -> setup ctrl connection with", 
 		  [{host, Host}, {port, Port}, {timeout, Timeout}]), 
@@ -1064,11 +1075,13 @@ handle_call({_, {open, ip_comm, Host, Opts}}, From, State) ->
     Mode     = key_search(mode,     Opts, ?DEFAULT_MODE),
     Port     = key_search(port,     Opts, ?FTP_PORT), 
     Timeout  = key_search(timeout,  Opts, ?CONNECTION_TIMEOUT),
+    DTimeout = key_search(dtimeout, Opts, ?DATA_ACCEPT_TIMEOUT),
     Progress = key_search(progress, Opts, ignore),
     
     State2 = State#state{client   = From, 
 			 mode     = Mode,
-			 progress = progress(Progress)}, 
+			 progress = progress(Progress), 
+			 dtimeout = DTimeout}, 
 
     case setup_ctrl_connection(Host, Port, Timeout, State2) of
 	{ok, State3, WaitTimeout} ->
@@ -1657,9 +1670,19 @@ handle_ctrl_result({pos_compl, Lines},
 %%--------------------------------------------------------------------------
 %% Directory listing 
 handle_ctrl_result({pos_prel, _}, #state{caller = {dir, Dir}} = State) ->
-    NewState = accept_data_connection(State),
-    activate_data_connection(NewState),
-    {noreply, NewState#state{caller = {handle_dir_result, Dir}}};
+    case accept_data_connection(State) of
+	{ok, NewState} ->
+	    activate_data_connection(NewState),
+	    {noreply, NewState#state{caller = {handle_dir_result, Dir}}};
+	{error, _Reason} = ERROR ->
+	    case State#state.client of
+		undefined ->
+		    {stop, ERROR, State};
+		From ->
+		    gen_server:reply(From, ERROR),
+		    {stop, normal, State#state{client = undefined}}
+	    end
+    end;
 
 handle_ctrl_result({pos_compl, _}, #state{caller = {handle_dir_result, Dir,
 						    Data}, client = From} 
@@ -1756,9 +1779,19 @@ handle_ctrl_result({Status, _},
 %%--------------------------------------------------------------------------
 %% File handling - recv_bin
 handle_ctrl_result({pos_prel, _}, #state{caller = recv_bin} = State) ->
-    NewState = accept_data_connection(State),
-    activate_data_connection(NewState),
-    {noreply, NewState};
+    case accept_data_connection(State) of
+	{ok, NewState} ->
+	    activate_data_connection(NewState),
+	    {noreply, NewState};
+	{error, _Reason} = ERROR ->
+	    case State#state.client of
+		undefined ->
+		    {stop, ERROR, State};
+		From ->
+		    gen_server:reply(From, ERROR),
+		    {stop, normal, State#state{client = undefined}}
+	    end
+    end;
 
 handle_ctrl_result({pos_compl, _}, #state{caller = {recv_bin, Data},
 					  client = From} = State) ->
@@ -1780,16 +1813,37 @@ handle_ctrl_result({Status, _}, #state{caller = {recv_bin, _}} = State) ->
 handle_ctrl_result({pos_prel, _}, #state{client = From,
 					 caller = start_chunk_transfer}
 		   = State) ->
-    NewState = accept_data_connection(State),
-    gen_server:reply(From, ok),
-    {noreply, NewState#state{chunk = true, client = undefined,
-			     caller = undefined}};
+    case accept_data_connection(State) of
+	{ok, NewState} ->
+	    gen_server:reply(From, ok),
+	    {noreply, NewState#state{chunk = true, client = undefined,
+				     caller = undefined}};
+	{error, _Reason} = ERROR ->
+	    case State#state.client of
+		undefined ->
+		    {stop, ERROR, State};
+		From ->
+		    gen_server:reply(From, ERROR),
+		    {stop, normal, State#state{client = undefined}}
+	    end
+    end;
+
 %%--------------------------------------------------------------------------
 %% File handling - recv_file
 handle_ctrl_result({pos_prel, _}, #state{caller = {recv_file, _}} = State) ->
-    NewState = accept_data_connection(State),
-    activate_data_connection(NewState),
-    {noreply, NewState};
+    case accept_data_connection(State) of
+	{ok, NewState} ->
+	    activate_data_connection(NewState),
+	    {noreply, NewState};
+	{error, _Reason} = ERROR ->
+	    case State#state.client of
+		undefined ->
+		    {stop, ERROR, State};
+		From ->
+		    gen_server:reply(From, ERROR),
+		    {stop, normal, State#state{client = undefined}}
+	    end
+    end;
 
 handle_ctrl_result({Status, _}, #state{caller = {recv_file, Fd}} = State) ->
     file_close(Fd),
@@ -1800,17 +1854,38 @@ handle_ctrl_result({Status, _}, #state{caller = {recv_file, Fd}} = State) ->
 %% File handling - transfer_*
 handle_ctrl_result({pos_prel, _}, #state{caller = {transfer_file, Fd}} 
 		   = State) ->
-    NewState = accept_data_connection(State),
-    send_file(Fd, NewState); 
+    case accept_data_connection(State) of
+	{ok, NewState} ->
+	    send_file(Fd, NewState); 
+	{error, _Reason} = ERROR ->
+	    case State#state.client of
+		undefined ->
+		    {stop, ERROR, State};
+		From ->
+		    gen_server:reply(From, ERROR),
+		    {stop, normal, State#state{client = undefined}}
+	    end
+    end;
 
 handle_ctrl_result({pos_prel, _}, #state{caller = {transfer_data, Bin}} 
 		   = State) ->
-    NewState = accept_data_connection(State),
-    send_data_message(NewState, Bin),
-    close_data_connection(NewState),
-    activate_ctrl_connection(NewState),
-    {noreply, NewState#state{caller = transfer_data_second_phase,
-			     dsock = undefined}};
+    case accept_data_connection(State) of
+	{ok, NewState} ->
+	    send_data_message(NewState, Bin),
+	    close_data_connection(NewState),
+	    activate_ctrl_connection(NewState),
+	    {noreply, NewState#state{caller = transfer_data_second_phase,
+				     dsock = undefined}};
+	{error, _Reason} = ERROR ->
+	    case State#state.client of
+		undefined ->
+		    {stop, ERROR, State};
+		From ->
+		    gen_server:reply(From, ERROR),
+		    {stop, normal, State#state{client = undefined}}
+	    end
+    end;
+
 %%--------------------------------------------------------------------------
 %% Default
 handle_ctrl_result({Status, Lines}, #state{client = From} = State) 
@@ -2009,16 +2084,20 @@ connect2(Host, Port, IpFam, Timeout) ->
 	    Error
     end.
 	    
-		
 
-accept_data_connection(#state{mode = active,
-			      dsock = {lsock, LSock}} = State) ->
-    {ok, Socket} = gen_tcp:accept(LSock),
-    gen_tcp:close(LSock),
-    State#state{dsock = Socket};
+accept_data_connection(#state{mode     = active,
+			      dtimeout = DTimeout, 
+			      dsock    = {lsock, LSock}} = State) ->
+    case gen_tcp:accept(LSock, DTimeout) of
+	{ok, Socket} ->
+	    gen_tcp:close(LSock),
+	    {ok, State#state{dsock = Socket}};
+	{error, Reason} ->
+	    {error, {data_connect_failed, Reason}}
+    end;
 
 accept_data_connection(#state{mode = passive} = State) ->
-    State.
+    {ok, State}.
 
 send_ctrl_message(#state{csock = Socket, verbose = Verbose}, Message) ->
     %% io:format("send control message: ~n~p~n", [lists:flatten(Message)]),
diff --git a/lib/inets/src/http_client/httpc.erl b/lib/inets/src/http_client/httpc.erl
index 75c26c63cc..d72c34fa6b 100644
--- a/lib/inets/src/http_client/httpc.erl
+++ b/lib/inets/src/http_client/httpc.erl
@@ -141,7 +141,9 @@ request(Url, Profile) ->
 request(Method, Request, HttpOptions, Options) ->
     request(Method, Request, HttpOptions, Options, default_profile()). 
 
-request(Method, {Url, Headers}, HTTPOptions, Options, Profile) 
+request(Method, 
+	{Url, Headers}, 
+	HTTPOptions, Options, Profile) 
   when (Method =:= options) orelse 
        (Method =:= get) orelse 
        (Method =:= head) orelse 
@@ -154,15 +156,17 @@ request(Method, {Url, Headers}, HTTPOptions, Options, Profile)
 		      {http_options, HTTPOptions}, 
 		      {options,      Options}, 
 		      {profile,      Profile}]),
-    case http_uri:parse(Url) of
+    case http_uri:parse(Url, Options) of
 	{error, Reason} ->
 	    {error, Reason};
-	ParsedUrl ->
+	{ok, ParsedUrl} ->
 	    handle_request(Method, Url, ParsedUrl, Headers, [], [], 
 			   HTTPOptions, Options, Profile)
     end;
      
-request(Method, {Url,Headers,ContentType,Body}, HTTPOptions, Options, Profile) 
+request(Method, 
+	{Url, Headers, ContentType, Body}, 
+	HTTPOptions, Options, Profile) 
   when ((Method =:= post) orelse (Method =:= put)) andalso 
        (is_atom(Profile) orelse is_pid(Profile)) ->
     ?hcrt("request", [{method,       Method}, 
@@ -173,10 +177,10 @@ request(Method, {Url,Headers,ContentType,Body}, HTTPOptions, Options, Profile)
 		      {http_options, HTTPOptions}, 
 		      {options,      Options}, 
 		      {profile,      Profile}]),
-    case http_uri:parse(Url) of
+    case http_uri:parse(Url, Options) of
 	{error, Reason} ->
 	    {error, Reason};
-	ParsedUrl ->
+	{ok, ParsedUrl} ->
 	    handle_request(Method, Url, 
 			   ParsedUrl, Headers, ContentType, Body, 
 			   HTTPOptions, Options, Profile)
@@ -267,7 +271,10 @@ store_cookies(SetCookieHeaders, Url, Profile)
 			    {profile,            Profile}]),
     try 
 	begin
-	    {_, _, Host, Port, Path, _} = http_uri:parse(Url),
+	    %% Since the Address part is not actually used
+	    %% by the manager when storing cookies, we dont
+	    %% care about ipv6-host-with-brackets.
+	    {ok, {_, _, Host, Port, Path, _}} = http_uri:parse(Url),
 	    Address     = {Host, Port}, 
 	    ProfileName = profile_name(Profile),
 	    Cookies     = httpc_cookie:cookies(SetCookieHeaders, Path, Host),
@@ -464,6 +471,8 @@ handle_request(Method, Url,
 	    HeadersRecord = header_record(NewHeaders, Host2, HTTPOptions),
 	    Receiver      = proplists:get_value(receiver, Options),
 	    SocketOpts    = proplists:get_value(socket_opts, Options),
+	    BracketedHost = proplists:get_value(ipv6_host_with_brackets, 
+						Options),
 	    MaybeEscPath  = maybe_encode_uri(HTTPOptions, Path),
 	    MaybeEscQuery = maybe_encode_uri(HTTPOptions, Query),
 	    AbsUri        = maybe_encode_uri(HTTPOptions, Url),
@@ -482,7 +491,8 @@ handle_request(Method, Url,
 			       stream        = Stream, 
 			       headers_as_is = headers_as_is(Headers0, Options),
 			       socket_opts   = SocketOpts, 
-			       started       = Started},
+			       started       = Started,
+			       ipv6_host_with_brackets = BracketedHost},
 
 	    case httpc_manager:request(Request, profile_name(Profile)) of
 		{ok, RequestId} ->
@@ -739,14 +749,17 @@ request_options_defaults() ->
 		error
 	end,
 
+    VerifyBrackets = VerifyBoolean, 
+
     [
-     {sync,          true,      VerifySync}, 
-     {stream,        none,      VerifyStream},
-     {body_format,   string,    VerifyBodyFormat},
-     {full_result,   true,      VerifyFullResult},
-     {headers_as_is, false,     VerifyHeaderAsIs},
-     {receiver,      self(),    VerifyReceiver},
-     {socket_opts,   undefined, VerifySocketOpts}
+     {sync,                    true,      VerifySync}, 
+     {stream,                  none,      VerifyStream},
+     {body_format,             string,    VerifyBodyFormat},
+     {full_result,             true,      VerifyFullResult},
+     {headers_as_is,           false,     VerifyHeaderAsIs},
+     {receiver,                self(),    VerifyReceiver},
+     {socket_opts,             undefined, VerifySocketOpts},
+     {ipv6_host_with_brackets, false,     VerifyBrackets}
     ]. 
 
 request_options(Options) ->
diff --git a/lib/inets/src/http_client/httpc_internal.hrl b/lib/inets/src/http_client/httpc_internal.hrl
index 1d8a5b6a92..e4127d992d 100644
--- a/lib/inets/src/http_client/httpc_internal.hrl
+++ b/lib/inets/src/http_client/httpc_internal.hrl
@@ -90,25 +90,28 @@
 %%% All data associated to a specific HTTP request
 -record(request,
 	{
-	 id,            % ref() - Request Id
-	 from,          % pid() - Caller
-	 redircount = 0,% Number of redirects made for this request
-	 scheme,        % http | https 
-	 address,       % ({Host,Port}) Destination Host and Port
-	 path,          % string() - Path of parsed URL
-	 pquery,        % string() - Rest of parsed URL
-	 method,        % atom() - HTTP request Method
-	 headers,       % #http_request_h{}
-	 content,       % {ContentType, Body} - Current HTTP request
-	 settings,      % #http_options{} - User defined settings
-	 abs_uri,       % string() ex: "http://www.erlang.org"
-	 userinfo,      % string() - optinal "<userinfo>@<host>:<port>"
-	 stream,	% Boolean() - stream async reply?
-	 headers_as_is, % Boolean() - workaround for servers that does
-			% not honor the http standard, can also be used for testing purposes.
-	 started,       % integer() > 0 - When we started processing the request
-	 timer,         % undefined | ref()
-	 socket_opts    % undefined | [socket_option()]
+	  id,            % ref() - Request Id
+	  from,          % pid() - Caller
+	  redircount = 0,% Number of redirects made for this request
+	  scheme,        % http | https 
+	  address,       % ({Host,Port}) Destination Host and Port
+	  path,          % string() - Path of parsed URL
+	  pquery,        % string() - Rest of parsed URL
+	  method,        % atom() - HTTP request Method
+	  headers,       % #http_request_h{}
+	  content,       % {ContentType, Body} - Current HTTP request
+	  settings,      % #http_options{} - User defined settings
+	  abs_uri,       % string() ex: "http://www.erlang.org"
+	  userinfo,      % string() - optinal "<userinfo>@<host>:<port>"
+	  stream,	 % boolean() - stream async reply?
+	  headers_as_is, % boolean() - workaround for servers that does
+			 % not honor the http standard, can also be used 
+			 % for testing purposes.
+	  started,       % integer() > 0 - When we started processing the 
+			 % request
+	  timer,         % undefined | ref()
+	  socket_opts,   % undefined | [socket_option()]
+	  ipv6_host_with_brackets % boolean()
 	}
        ).               
 
diff --git a/lib/inets/src/http_client/httpc_manager.erl b/lib/inets/src/http_client/httpc_manager.erl
index 9015bf1ce2..ab575d867e 100644
--- a/lib/inets/src/http_client/httpc_manager.erl
+++ b/lib/inets/src/http_client/httpc_manager.erl
@@ -256,19 +256,27 @@ reset_cookies(ProfileName) ->
 
 
 %%--------------------------------------------------------------------
-%% Function: which_cookies(Url, ProfileName) -> [cookie()]
+%% Function: which_cookies(ProfileName)               -> [cookie()]
+%%           which_cookies(Url, ProfileName)          -> [cookie()]
+%%           which_cookies(Url, Options, ProfileName) -> [cookie()]
 %%
 %%	Url = string()
+%%	Options = [option()]
 %%      ProfileName = atom()
+%%      option() = {ipv6_host_with_brackets, boolean()}
 %%
 %% Description: Retrieves the cookies that would be sent when 
 %% requesting <Url>.
 %%--------------------------------------------------------------------
 
-which_cookies(ProfileName) ->
+which_cookies(ProfileName) when is_atom(ProfileName) ->
     call(ProfileName, which_cookies).
-which_cookies(Url, ProfileName) ->
-    call(ProfileName, {which_cookies, Url}).
+which_cookies(Url, ProfileName) 
+  when is_list(Url) andalso is_atom(ProfileName) ->
+    call(ProfileName, {which_cookies, Url, []}).
+which_cookies(Url, Options, ProfileName) 
+  when is_list(Url) andalso is_list(Options) andalso is_atom(ProfileName) ->
+    call(ProfileName, {which_cookies, Url, Options}).
 
 
 %%--------------------------------------------------------------------
@@ -395,15 +403,16 @@ handle_call(which_cookies, _, #state{cookie_db = CookieDb} = State) ->
     CookieHeaders = httpc_cookie:which_cookies(CookieDb),
     {reply, CookieHeaders, State};
 
-handle_call({which_cookies, Url}, _, #state{cookie_db = CookieDb} = State) ->
-    ?hcrv("which cookies", [{url, Url}]),
-    case http_uri:parse(Url) of
-	{Scheme, _, Host, Port, Path, _} ->
+handle_call({which_cookies, Url, Options}, _, 
+	    #state{cookie_db = CookieDb} = State) ->
+    ?hcrv("which cookies", [{url, Url}, {options, Options}]),
+    case http_uri:parse(Url, Options) of
+	{ok, {Scheme, _, Host, Port, Path, _}} ->
 	    CookieHeaders = 
 		httpc_cookie:header(CookieDb, Scheme, {Host, Port}, Path),
 	    {reply, CookieHeaders, State};
-	Msg ->
-	    {reply, Msg, State}
+	{error, _} = ERROR ->
+	    {reply, ERROR, State}
     end;
 
 handle_call(info, _, State) ->
diff --git a/lib/inets/src/http_client/httpc_response.erl b/lib/inets/src/http_client/httpc_response.erl
index 207b96271c..2414ed0911 100644
--- a/lib/inets/src/http_client/httpc_response.erl
+++ b/lib/inets/src/http_client/httpc_response.erl
@@ -340,7 +340,9 @@ redirect(Response = {StatusLine, Headers, Body}, Request) ->
 	undefined ->
 	    transparent(Response, Request);
 	RedirUrl ->
-	    case http_uri:parse(RedirUrl) of
+	    UrlParseOpts = [{ipv6_host_with_brackets, 
+			     Request#request.ipv6_host_with_brackets}], 
+	    case http_uri:parse(RedirUrl, UrlParseOpts) of
 		{error, no_scheme} when
 		(Request#request.settings)#http_options.relaxed ->
 		    NewLocation = fix_relative_uri(Request, RedirUrl),
@@ -350,10 +352,9 @@ redirect(Response = {StatusLine, Headers, Body}, Request) ->
 		{error, Reason} ->
 		    {ok, error(Request, Reason), Data};
 		%% Automatic redirection
-		{Scheme, _, Host, Port, Path,  Query} -> 
+		{ok, {Scheme, _, Host, Port, Path,  Query}} -> 
 		    NewHeaders = 
-			(Request#request.headers)#http_request_h{host = 
-								 Host},
+			(Request#request.headers)#http_request_h{host = Host},
 		    NewRequest = 
 			Request#request{redircount = 
 					Request#request.redircount+1,
diff --git a/lib/inets/src/http_lib/http_uri.erl b/lib/inets/src/http_lib/http_uri.erl
index 44b9face0b..74ffa37ca4 100644
--- a/lib/inets/src/http_lib/http_uri.erl
+++ b/lib/inets/src/http_lib/http_uri.erl
@@ -1,7 +1,7 @@
 %%
 %% %CopyrightBegin%
 %%
-%% Copyright Ericsson AB 2006-2010. All Rights Reserved.
+%% Copyright Ericsson AB 2006-2011. All Rights Reserved.
 %%
 %% The contents of this file are subject to the Erlang Public License,
 %% Version 1.1, (the "License"); you may not use this file except in
@@ -16,23 +16,30 @@
 %%
 %% %CopyrightEnd%
 %%
-%%
+%% 
+%% RFC 3986
+%% 
 
 -module(http_uri).
 
--export([parse/1, encode/1, decode/1]).
+-export([parse/1, parse/2, 
+	 encode/1, decode/1]).
+
 
 %%%=========================================================================
 %%%  API
 %%%=========================================================================
 parse(AbsURI) ->
+    parse(AbsURI, []).
+
+parse(AbsURI, Opts) ->
     case parse_scheme(AbsURI) of
 	{error, Reason} ->
 	    {error, Reason};
 	{Scheme, Rest} ->
-	    case (catch parse_uri_rest(Scheme, Rest)) of
+	    case (catch parse_uri_rest(Scheme, Rest, Opts)) of
 		{UserInfo, Host, Port, Path, Query} ->
-		    {Scheme, UserInfo, Host, Port, Path, Query};
+		    {ok, {Scheme, UserInfo, Host, Port, Path, Query}};
 		_  ->
 		    {error, {malformed_url, AbsURI}}
 	    end
@@ -62,15 +69,14 @@ parse_scheme(AbsURI) ->
 	    {error, no_scheme};
 	{StrScheme, Rest} ->
 	    case list_to_atom(http_util:to_lower(StrScheme)) of
-		Scheme when Scheme == http; Scheme == https ->
+		Scheme when (Scheme =:= http) orelse (Scheme =:= https) ->
 		    {Scheme, Rest};
 		Scheme ->
 		    {error, {not_supported_scheme, Scheme}}
 	    end
     end.
 
-parse_uri_rest(Scheme, "//" ++ URIPart) ->
-
+parse_uri_rest(Scheme, "//" ++ URIPart, Opts) ->
     {Authority, PathQuery} =
 	case split_uri(URIPart, "/", URIPart, 1, 0) of
 	    Split = {_, _} ->
@@ -85,8 +91,8 @@ parse_uri_rest(Scheme, "//" ++ URIPart) ->
 	end,
 
     {UserInfo, HostPort} = split_uri(Authority, "@", {"", Authority}, 1, 1),
-    {Host, Port} = parse_host_port(Scheme, HostPort),
-    {Path, Query} = parse_path_query(PathQuery),
+    {Host, Port}         = parse_host_port(Scheme, HostPort, Opts),
+    {Path, Query}        = parse_path_query(PathQuery),
     {UserInfo, Host, Port, Path, Query}.
 
 
@@ -94,13 +100,14 @@ parse_path_query(PathQuery) ->
     {Path, Query} =  split_uri(PathQuery, "\\?", {PathQuery, ""}, 1, 0),
     {path(Path), Query}.
 
-parse_host_port(Scheme,"[" ++ HostPort) -> %ipv6
+parse_host_port(Scheme,"[" ++ HostPort, Opts) -> %ipv6
     DefaultPort = default_port(Scheme),
     {Host, ColonPort} = split_uri(HostPort, "\\]", {HostPort, ""}, 1, 1),
+    Host2 = maybe_ipv6_host_with_brackets(Host, Opts),
     {_, Port} = split_uri(ColonPort, ":", {"", DefaultPort}, 0, 1),
-    {Host, int_port(Port)};
+    {Host2, int_port(Port)};
 
-parse_host_port(Scheme, HostPort) ->
+parse_host_port(Scheme, HostPort, _Opts) ->
     DefaultPort = default_port(Scheme),
     {Host, Port} = split_uri(HostPort, ":", {HostPort, DefaultPort}, 1, 1),
     {Host, int_port(Port)}.
@@ -114,6 +121,14 @@ split_uri(UriPart, SplitChar, NoMatchResult, SkipLeft, SkipRight) ->
 	    NoMatchResult
     end.
 
+maybe_ipv6_host_with_brackets(Host, Opts) ->
+    case lists:keysearch(ipv6_host_with_brackets, 1, Opts) of
+	{value, {ipv6_host_with_brackets, true}} ->
+	    "[" ++ Host ++ "]";
+	_ ->
+	    Host
+    end.
+
 default_port(http) ->
     80;
 default_port(https) ->
diff --git a/lib/inets/src/inets_app/Makefile b/lib/inets/src/inets_app/Makefile
index 20e22917e2..63ab0a5bae 100644
--- a/lib/inets/src/inets_app/Makefile
+++ b/lib/inets/src/inets_app/Makefile
@@ -30,6 +30,7 @@ include ../../vsn.mk
 
 VSN = $(INETS_VSN)
 
+
 # ----------------------------------------------------
 # Release directory specification
 # ----------------------------------------------------
@@ -41,8 +42,8 @@ RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN)
 # ----------------------------------------------------
 
 MODULES = \
-	inets_service \
 	inets \
+	inets_service \
 	inets_app \
 	inets_sup \
 	inets_regexp
diff --git a/lib/inets/src/inets_app/inets.mk b/lib/inets/src/inets_app/inets.mk
index b6e9fe1d96..35fb0d7eca 100644
--- a/lib/inets/src/inets_app/inets.mk
+++ b/lib/inets/src/inets_app/inets.mk
@@ -33,6 +33,10 @@ ifeq ($(WARN_UNUSED_WARS), true)
 ERL_COMPILE_FLAGS += +warn_unused_vars
 endif
 
+ifeq ($(shell erl -noshell -eval 'io:format("~4s", [erlang:system_info(otp_release)])' -s init stop), R14B)
+INETS_ERL_COMPILE_FLAGS += -D'OTP-R14B-COMPILER'
+endif
+
 INETS_APP_VSN_COMPILE_FLAGS = \
 	+'{parse_transform,sys_pre_attributes}' \
 	+'{attribute,insert,app_vsn,$(APP_VSN)}'
diff --git a/lib/inets/src/inets_app/inets_service.erl b/lib/inets/src/inets_app/inets_service.erl
index f89dac195c..a057a51e2c 100644
--- a/lib/inets/src/inets_app/inets_service.erl
+++ b/lib/inets/src/inets_app/inets_service.erl
@@ -1,7 +1,7 @@
 %%
 %% %CopyrightBegin%
 %%
-%% Copyright Ericsson AB 2007-2010. All Rights Reserved.
+%% Copyright Ericsson AB 2007-2011. All Rights Reserved.
 %%
 %% The contents of this file are subject to the Erlang Public License,
 %% Version 1.1, (the "License"); you may not use this file except in
@@ -20,6 +20,21 @@
 
 -module(inets_service).
 
+-ifdef('OTP-R14B-COMPILER').
+
+-export([behaviour_info/1]).
+
+behaviour_info(callbacks) ->
+        [{start_standalone,         1}, 
+	 {start_service,            1},
+	 {stop_service,             1},
+	 {services,                 0},
+	 {service_info,             1}];
+behaviour_info(_) ->
+        undefined.
+
+-else.
+
 %% Starts service stand-alone
 %% start_standalone(Config) ->  % {ok, Pid} | {error, Reason}
 %%    <service>:start_link(Config).
@@ -67,3 +82,5 @@
 
 -callback service_info(Service :: term()) ->
     {ok, [{Property :: term(), Value :: term()}]} | {error, Reason :: term()}.
+
+-endif.
diff --git a/lib/inets/src/tftp/tftp.erl b/lib/inets/src/tftp/tftp.erl
index b33c0a98f4..8d8fce388d 100644
--- a/lib/inets/src/tftp/tftp.erl
+++ b/lib/inets/src/tftp/tftp.erl
@@ -224,6 +224,20 @@
 	 service_info/1
 	]).
 
+-ifdef('OTP-R14B-COMPILER').
+
+-export([behaviour_info/1]).
+
+behaviour_info(callbacks) ->
+    [{prepare, 6}, 
+     {open,    6}, 
+     {read,    1}, 
+     {write,   2}, 
+     {abort,   3}];
+behaviour_info(_) ->
+    undefined.
+
+-else.
 
 -type peer() :: {PeerType :: inet | inet6,
 		 PeerHost :: inet:ip_address(),
@@ -266,6 +280,8 @@
 
 -callback abort(Code :: error_code(), string(), State :: term()) -> 'ok'.
 
+-endif.
+
 -include("tftp.hrl").
 
 
diff --git a/lib/inets/test/ftp_suite_lib.erl b/lib/inets/test/ftp_suite_lib.erl
index 3ebd02229e..ffb58c91b6 100644
--- a/lib/inets/test/ftp_suite_lib.erl
+++ b/lib/inets/test/ftp_suite_lib.erl
@@ -196,7 +196,9 @@ test_filenames() ->
 %% variable, but should NOT alter/remove any existing entries.
 %%--------------------------------------------------------------------
 init_per_testcase(Case, Config) 
-  when (Case =:= open) orelse (Case =:= open_port) ->
+  when (Case =:= open) orelse 
+       (Case =:= open_port) ->
+    put(ftp_testcase, Case), 
     io:format(user, "~n~n*** INIT ~w:~w ***~n~n", [?MODULE, Case]),
     inets:start(),
     NewConfig = data_dir(Config),
@@ -266,7 +268,7 @@ do_init_per_testcase(Case, Config) ->
  	end,
     Opts2 = 
 	case string:tokens(atom_to_list(Case), [$_]) of
-	    [_, "active" | _] ->
+	    ["active" | _] ->
 		[{mode, active}  | Opts1];
 	    _ ->
 		[{mode, passive} | Opts1]
@@ -367,8 +369,11 @@ open(Config) when is_list(Config) ->
 
 
 tc_open(Host) ->
+    p("tc_open -> entry with"
+      "~n   Host: ~p", [Host]),
     {ok, Pid} = ?ftp_open(Host, []),
     ok = ftp:close(Pid),
+    p("tc_open -> try (ok) open 1"),
     {ok, Pid1} = 
 	ftp:open({option_list, [{host,Host}, 
 				{port, ?FTP_PORT}, 
@@ -376,11 +381,13 @@ tc_open(Host) ->
 				{timeout, 30000}]}),
     ok = ftp:close(Pid1),
     
+    p("tc_open -> try (fail) open 2"),
     {error, ehost} = 
 	ftp:open({option_list, [{port, ?FTP_PORT}, {flags, [verbose]}]}),
     {ok, Pid2} = ftp:open(Host),
     ok = ftp:close(Pid2),
     
+    p("tc_open -> try (ok) open 3"),
     {ok, NewHost} = inet:getaddr(Host, inet),
     {ok, Pid3} = ftp:open(NewHost),
     ftp:user(Pid3, ?FTP_USER, ?FTP_PASS),
@@ -392,33 +399,68 @@ tc_open(Host) ->
 
     %% Bad input that has default values are ignored and the defult 
     %% is used.
+    p("tc_open -> try (ok) open 4"),
     {ok, Pid4} = 
-	ftp:open({option_list, [{host, Host}, {port, badarg}, 
-				{flags, [verbose]}, 
+	ftp:open({option_list, [{host,    Host}, 
+				{port,    badarg}, 
+				{flags,   [verbose]}, 
 				{timeout, 30000}]}),
     test_server:sleep(100),
     ok = ftp:close(Pid4),
+
+    p("tc_open -> try (ok) open 5"),
     {ok, Pid5} = 
-	ftp:open({option_list, [{host, Host}, {port, ?FTP_PORT}, 
-				{flags, [verbose]}, 
+	ftp:open({option_list, [{host,    Host}, 
+				{port,    ?FTP_PORT}, 
+				{flags,   [verbose]}, 
 				{timeout, -42}]}),
     test_server:sleep(100),
     ok = ftp:close(Pid5),
+
+    p("tc_open -> try (ok) open 6"),
     {ok, Pid6} = 
-	ftp:open({option_list, [{host, Host}, {port, ?FTP_PORT}, 
+	ftp:open({option_list, [{host,  Host}, 
+				{port,  ?FTP_PORT}, 
 				{flags, [verbose]}, 
-				{mode, cool}]}),
+				{mode,  cool}]}),
     test_server:sleep(100),
     ok = ftp:close(Pid6),
 
+    p("tc_open -> try (ok) open 7"),
     {ok, Pid7} = 
 	ftp:open(Host, [{port, ?FTP_PORT}, {verbose, true}, {timeout, 30000}]),
     ok = ftp:close(Pid7),
 
+    p("tc_open -> try (ok) open 8"),
     {ok, Pid8} = 
 	ftp:open(Host, ?FTP_PORT),
     ok = ftp:close(Pid8),
 
+    p("tc_open -> try (ok) open 9"),
+    {ok, Pid9} = 
+	ftp:open(Host, [{port,     ?FTP_PORT}, 
+			{verbose,  true}, 
+			{timeout,  30000}, 
+			{dtimeout, -99}]),
+    ok = ftp:close(Pid9),
+
+    p("tc_open -> try (ok) open 10"),
+    {ok, Pid10} = 
+	ftp:open(Host, [{port,     ?FTP_PORT}, 
+			{verbose,  true}, 
+			{timeout,  30000}, 
+			{dtimeout, "foobar"}]),
+    ok = ftp:close(Pid10),
+
+    p("tc_open -> try (ok) open 11"),
+    {ok, Pid11} = 
+	ftp:open(Host, [{port,     ?FTP_PORT}, 
+			{verbose,  true}, 
+			{timeout,  30000}, 
+			{dtimeout, 1}]),
+    ok = ftp:close(Pid11),
+
+    p("tc_open -> done"),
     ok.
 
     
@@ -445,7 +487,7 @@ passive_user(suite) ->
     [];
 passive_user(Config) when is_list(Config) ->
     Pid = ?config(ftp, Config),
-    io:format("Pid: ~p~n",[Pid]),
+    p("Pid: ~p",[Pid]),
     do_user(Pid).
 
 
@@ -967,13 +1009,13 @@ api_missuse(doc)->
     ["Test that behaviour of the ftp process if the api is abused"];
 api_missuse(suite) -> [];
 api_missuse(Config) when is_list(Config) ->
-    io:format("api_missuse -> entry~n", []),
+    p("api_missuse -> entry"),
     Flag =  process_flag(trap_exit, true),
     Pid = ?config(ftp, Config),
     Host = ftp_host(Config), 
     
     %% Serious programming fault, connetion will be shut down 
-    io:format("api_missuse -> verify bad call termination (~p)~n", [Pid]),
+    p("api_missuse -> verify bad call termination (~p)", [Pid]),
     case (catch gen_server:call(Pid, {self(), foobar, 10}, infinity)) of
 	{error, {connection_terminated, 'API_violation'}} ->
 	    ok;
@@ -983,23 +1025,23 @@ api_missuse(Config) when is_list(Config) ->
     test_server:sleep(500),
     undefined = process_info(Pid, status),
 
-    io:format("api_missuse -> start new client~n", []),
+    p("api_missuse -> start new client"),
     {ok, Pid2} =  ?ftp_open(Host, []),
     %% Serious programming fault, connetion will be shut down 
-    io:format("api_missuse -> verify bad cast termination~n", []),
+    p("api_missuse -> verify bad cast termination"),
     gen_server:cast(Pid2, {self(), foobar, 10}),
     test_server:sleep(500),
     undefined = process_info(Pid2, status),
 
-    io:format("api_missuse -> start new client~n", []),
+    p("api_missuse -> start new client"),
     {ok, Pid3} =  ?ftp_open(Host, []),
     %% Could be an innocent misstake the connection lives. 
-    io:format("api_missuse -> verify bad bang~n", []),
+    p("api_missuse -> verify bad bang"),
     Pid3 ! foobar, 
     test_server:sleep(500),
     {status, _} = process_info(Pid3, status),
     process_flag(trap_exit, Flag),
-    io:format("api_missuse -> done~n", []),
+    p("api_missuse -> done"),
     ok.
 
 
@@ -1567,9 +1609,9 @@ split([], I, Is) ->
     lists:reverse([lists:reverse(I)| Is]).
 
 do_ftp_open(Host, Opts) ->
-    io:format("do_ftp_open -> entry with"
-	      "~n   Host: ~p"
-	      "~n   Opts: ~p", [Host, Opts]), 
+    p("do_ftp_open -> entry with"
+      "~n   Host: ~p"
+      "~n   Opts: ~p", [Host, Opts]), 
     case ftp:open(Host, Opts) of
 	{ok, _} = OK ->
 	    OK;
@@ -1595,7 +1637,7 @@ passwd() ->
 ftpd_hosts(Config) ->
     DataDir = ?config(data_dir, Config),
     FileName = filename:join([DataDir, "../ftp_SUITE_data/", ftpd_hosts]),
-    io:format("FileName: ~p~n", [FileName]),
+    p("FileName: ~p", [FileName]),
     case file:consult(FileName) of
 	{ok, [Hosts]} when is_list(Hosts) ->
 	    Hosts;
diff --git a/lib/inets/test/ftp_windows_2003_server_test.erl b/lib/inets/test/ftp_windows_2003_server_test.erl
index 57f1ae8358..32f25713f8 100644
--- a/lib/inets/test/ftp_windows_2003_server_test.erl
+++ b/lib/inets/test/ftp_windows_2003_server_test.erl
@@ -1,7 +1,7 @@
 %%
 %% %CopyrightBegin%
 %% 
-%% Copyright Ericsson AB 2005-2010. All Rights Reserved.
+%% Copyright Ericsson AB 2005-2011. All Rights Reserved.
 %% 
 %% The contents of this file are subject to the Erlang Public License,
 %% Version 1.1, (the "License"); you may not use this file except in
@@ -87,14 +87,22 @@ end_per_testcase(Case, Config) ->
 %% Description: Returns a list of all test cases in this test suite
 %%--------------------------------------------------------------------
 all() -> 
-    [open, open_port, {group, passive}, {group, active},
-     api_missuse, not_owner, {group, progress_report}].
+    [
+     open, 
+     open_port, 
+     {group, passive}, 
+     {group, active},
+     api_missuse, 
+     not_owner, 
+     {group, progress_report}
+    ].
 
 groups() -> 
-    [{passive, [], ftp_suite_lib:passive(suite)},
-     {active, [], ftp_suite_lib:active(suite)},
-     {progress_report, [],
-      ftp_suite_lib:progress_report(suite)}].
+    [
+     {passive,         [], ftp_suite_lib:passive(suite)},
+     {active,          [], ftp_suite_lib:active(suite)},
+     {progress_report, [], ftp_suite_lib:progress_report(suite)}
+    ].
 
 init_per_group(_GroupName, Config) ->
     Config.
diff --git a/lib/inets/test/httpc_SUITE.erl b/lib/inets/test/httpc_SUITE.erl
index f95fb93669..6eb500ea37 100644
--- a/lib/inets/test/httpc_SUITE.erl
+++ b/lib/inets/test/httpc_SUITE.erl
@@ -1878,22 +1878,31 @@ parse_url(suite) ->
     [];
 parse_url(Config) when is_list(Config) ->
     %% ipv6
-    {http,[],"2010:836B:4179::836B:4179",80,"/foobar.html",[]}
-	= http_uri:parse("http://[2010:836B:4179::836B:4179]/foobar.html"),
+    {ok, {http,[],"2010:836B:4179::836B:4179",80,"/foobar.html",[]}} = 
+	http_uri:parse("http://[2010:836B:4179::836B:4179]/foobar.html"),
+    {ok, {http,[],"[2010:836B:4179::836B:4179]",80,"/foobar.html",[]}} = 
+	http_uri:parse("http://[2010:836B:4179::836B:4179]/foobar.html", 
+		       [{ipv6_host_with_brackets, true}]),
+    {ok, {http,[],"2010:836B:4179::836B:4179",80,"/foobar.html",[]}} = 
+	http_uri:parse("http://[2010:836B:4179::836B:4179]/foobar.html", 
+		       [{ipv6_host_with_brackets, false}]),
+    {ok, {http,[],"2010:836B:4179::836B:4179",80,"/foobar.html",[]}} = 
+	http_uri:parse("http://[2010:836B:4179::836B:4179]/foobar.html", 
+		       [{foo, false}]),
     {error,
      {malformed_url,"http://2010:836B:4179::836B:4179/foobar.html"}} =
 	http_uri:parse("http://2010:836B:4179::836B:4179/foobar.html"), 
 
     %% ipv4
-    {http,[],"127.0.0.1",80,"/foobar.html",[]} =
+    {ok, {http,[],"127.0.0.1",80,"/foobar.html",[]}} =
 	http_uri:parse("http://127.0.0.1/foobar.html"),
     
     %% host
-    {http,[],"localhost",8888,"/foobar.html",[]} = 
+    {ok, {http,[],"localhost",8888,"/foobar.html",[]}} = 
 	http_uri:parse("http://localhost:8888/foobar.html"),
     
     %% Userinfo
-    {http,"nisse:foobar","localhost",8888,"/foobar.html",[]} =
+    {ok, {http,"nisse:foobar","localhost",8888,"/foobar.html",[]}} =
 	http_uri:parse("http://nisse:foobar@localhost:8888/foobar.html"),
     
     %% Scheme error
@@ -1902,18 +1911,20 @@ parse_url(Config) when is_list(Config) ->
 	http_uri:parse("localhost:8888/foobar.html"),
     
     %% Query
-    {http,[],"localhost",8888,"/foobar.html","?foo=bar&foobar=42"} =
+    {ok, {http,[],"localhost",8888,"/foobar.html","?foo=bar&foobar=42"}} =
 	http_uri:parse("http://localhost:8888/foobar.html?foo=bar&foobar=42"),
     
     %%  Esc chars
-    {http,[],"www.somedomain.com",80,"/%2Eabc",[]} =
+    {ok, {http,[],"www.somedomain.com",80,"/%2Eabc",[]}} =
 	http_uri:parse("http://www.somedomain.com/%2Eabc"),
-    {http,[],"www.somedomain.com",80,"/%252Eabc",[]} = 
+    {ok, {http,[],"www.somedomain.com",80,"/%252Eabc",[]}} = 
 	http_uri:parse("http://www.somedomain.com/%252Eabc"),
-    {http,[],"www.somedomain.com",80,"/%25abc",[]} =
+    {ok, {http,[],"www.somedomain.com",80,"/%25abc",[]}} =
 	http_uri:parse("http://www.somedomain.com/%25abc"),
-    {http,[],"www.somedomain.com",80,"/%25abc", "?foo=bar"} =
+    {ok, {http,[],"www.somedomain.com",80,"/%25abc", "?foo=bar"}} =
 	http_uri:parse("http://www.somedomain.com/%25abc?foo=bar"),
+
+    
     ok.    
 
 
@@ -2058,12 +2069,14 @@ http_invalid_http(Config) when is_list(Config) ->
 
 %%-------------------------------------------------------------------------
 
+-define(GOOGLE, "www.google.com").
+
 hexed_query_otp_6191(doc) ->
     [];
 hexed_query_otp_6191(suite) ->
     [];
 hexed_query_otp_6191(Config) when is_list(Config) ->
-    Google = "www.google.com",
+    Google = ?GOOGLE, 
     GoogleSearch = "http://" ++ Google ++ "/search",
     Search1 = "?hl=en&q=a%D1%85%D1%83%D0%B9&btnG=Google+Search", 
     URI1    = GoogleSearch ++ Search1,
@@ -2072,11 +2085,32 @@ hexed_query_otp_6191(Config) when is_list(Config) ->
     Search3 = "?hl=en&q=%foo",
     URI3    = GoogleSearch ++ Search3, 
 
-    {http, [], Google, 80, "/search", _} = http_uri:parse(URI1),
-    {http, [], Google, 80, "/search", _} = http_uri:parse(URI2),
-    {http, [], Google, 80, "/search", _} = http_uri:parse(URI3),
+    Verify1 = 
+	fun({http, [], ?GOOGLE, 80, "/search", _}) -> ok;
+	   (_) -> error
+	end,
+    Verify2 = Verify1, 
+    Verify3 = Verify1, 
+    verify_uri(URI1, Verify1), 
+    verify_uri(URI2, Verify2), 
+    verify_uri(URI3, Verify3), 
     ok.
 
+verify_uri(URI, Verify) ->
+    case http_uri:parse(URI) of
+	{ok, ParsedURI} ->
+	    case Verify(ParsedURI) of
+		ok ->
+		    ok;
+		error ->
+		    Reason = {unexpected_parse_result, URI, ParsedURI}, 
+		    ERROR  = {error, Reason}, 
+		    throw(ERROR)
+	    end;
+	{error, _} = ERROR ->
+	    throw(ERROR)
+    end.
+
 
 %%-------------------------------------------------------------------------
 
diff --git a/lib/wx/examples/demo/Makefile b/lib/wx/examples/demo/Makefile
index 98d7c6a130..8afa0e780e 100644
--- a/lib/wx/examples/demo/Makefile
+++ b/lib/wx/examples/demo/Makefile
@@ -80,7 +80,7 @@ include $(ERL_TOP)/make/otp_release_targets.mk
 
 docs: 
 
-release_spec: 
+release_spec: opt
 	$(INSTALL_DIR) $(EXRELSYSDIR)
 	$(INSTALL_DATA) $(TESTSRC)  $(EXRELSYSDIR)
 	$(INSTALL_DATA) $(TESTTARGETS) $(EXRELSYSDIR)
diff --git a/lib/wx/examples/simple/Makefile b/lib/wx/examples/simple/Makefile
index 41f0b46eb1..66f5952f0d 100644
--- a/lib/wx/examples/simple/Makefile
+++ b/lib/wx/examples/simple/Makefile
@@ -51,7 +51,7 @@ include $(ERL_TOP)/make/otp_release_targets.mk
 
 docs: 
 
-release_spec: 
+release_spec: opt
 	$(INSTALL_DIR) $(EXRELSYSDIR)
 	$(INSTALL_DATA) $(TESTSRC) $(EXRELSYSDIR)
 	$(INSTALL_DATA) copy.xpm sample.xpm $(TESTTARGETS) $(EXRELSYSDIR)
diff --git a/lib/wx/examples/sudoku/Makefile b/lib/wx/examples/sudoku/Makefile
index b86c654fdd..33725756b7 100644
--- a/lib/wx/examples/sudoku/Makefile
+++ b/lib/wx/examples/sudoku/Makefile
@@ -51,7 +51,7 @@ include $(ERL_TOP)/make/otp_release_targets.mk
 
 docs: 
 
-release_spec: 
+release_spec: opt
 	$(INSTALL_DIR) $(EXRELSYSDIR)
 	$(INSTALL_DATA) $(TESTSRC) sudoku.hrl $(EXRELSYSDIR)
 	$(INSTALL_DATA) $(TESTTARGETS) $(EXRELSYSDIR)
diff --git a/lib/wx/examples/xrc/Makefile b/lib/wx/examples/xrc/Makefile
index 1dfaae9689..aba58e0d0f 100644
--- a/lib/wx/examples/xrc/Makefile
+++ b/lib/wx/examples/xrc/Makefile
@@ -28,7 +28,8 @@ TESTMODS = xrc
 TESTTARGETS = $(TESTMODS:%=%.beam)
 TESTSRC = $(TESTMODS:%=%.erl)
 
-RESOURCEFILES = appicon.ico basicdlg.xpm custclas.xpm fileopen.gif menu.xrc \
+RESOURCEFILES = \
+	appicon.ico basicdlg.xpm custclas.xpm fileopen.gif menu.xrc \
 	resource.xrc uncenter.xpm  variable.xrc appicon.xpm basicdlg.xrc \
 	custclas.xrc filesave.gif platform.xpm stop.xpm uncenter.xrc \
 	artprov.xpm controls.xpm derivdlg.xpm frame.xrc platform.xrc \
@@ -59,7 +60,7 @@ include $(ERL_TOP)/make/otp_release_targets.mk
 
 docs: 
 
-release_spec: 
+release_spec: opt
 	$(INSTALL_DIR) $(EXRELSYSDIR)
 	$(INSTALL_DATA) $(TESTSRC) $(EXRELSYSDIR)
 	$(INSTALL_DATA) $(TESTTARGETS) $(EXRELSYSDIR)