Merge remote branch 'origin/peppe/common_test/documentation_r15b02.2' into maint

* origin/peppe/common_test/documentation_r15b02.2:
  Update the documentation for R15B02

OTP-10050
OTP-10069
OTP-10072
OTP-10087
OTP-9865
OTP-10049
OTP-10089
OTP-10145
OTP-9896
OTP-10135
OTP-10067
OTP-9625
OTP-10127
OTP-10172
OTP-10248
OTP-9625
OTP-10086
OTP-10248

7 files changed, 624 insertions, 318 deletions

diff --git a/lib/common_test/doc/src/config_file_chapter.xml b/lib/common_test/doc/src/config_file_chapter.xml
index e843ed3ba4..3e6fb21659 100644
--- a/lib/common_test/doc/src/config_file_chapter.xml
+++ b/lib/common_test/doc/src/config_file_chapter.xml
@@ -29,6 +29,8 @@
     <file>config_file_chapter.xml</file>
   </header>
 
+    <marker id="top"></marker>
+
   <section>
     <title>General</title>
 
diff --git a/lib/common_test/doc/src/ct_master_chapter.xml b/lib/common_test/doc/src/ct_master_chapter.xml
index f4f0ecad62..21deed099d 100644
--- a/lib/common_test/doc/src/ct_master_chapter.xml
+++ b/lib/common_test/doc/src/ct_master_chapter.xml
@@ -124,7 +124,8 @@
     <p><c>NodeRef = NodeAlias | node() | master</c></p>
 
     <p>A <c>NodeAlias</c> (<c>atom()</c>) is used in a test specification as a 
-    reference to a node name (so the actual node name only needs to be declared once). 
+    reference to a node name (so the actual node name only needs to be declared once,
+      which can of course also be achieved using constants). 
     The alias is declared with a <c>node</c> term:</p>
 
     <p><c>{node, NodeAlias, NodeName}</c></p>
@@ -141,30 +142,32 @@
     CT Master:</p>
 
     <pre>
-      {node, node1, ct_node@host_x}.
-      {node, node2, ct_node@host_y}.
- 
-      {logdir, master, "/home/test/master_logs"}.
-      {logdir, "/home/test/logs"}.
+      {define, 'Top', "/home/test"}.
+      {define, 'T1', "'Top'/t1"}.
+      {define, 'T2', "'Top'/t2"}.
+      {define, 'T3', "'Top'/t3"}.
+      {define, 'CfgFile', "config.cfg"}.
+      {define, 'Node', ct_node}.
+
+      {node, node1, 'Node@host_x'}.
+      {node, node2, 'Node@host_y'}.
+
+      {logdir, master, "'Top'/master_logs"}.
+      {logdir, "'Top'/logs"}.
       
-      {config, node1, "/home/test/t1/cfg/config.cfg"}.
-      {config, node2, "/home/test/t2/cfg/config.cfg"}.
-      {config, "/home/test/t3/cfg/config.cfg"}.
+      {config, node1, "'T1'/'CfgFile'"}.
+      {config, node2, "'T2'/'CfgFile'"}.
+      {config, "'T3'/'CfgFile'"}.
       
-      {alias, t1, "/home/test/t1"}.
-      {alias, t2, "/home/test/t2"}.
-      {alias, t3, "/home/test/t3"}.
+      {suites, node1, 'T1', all}.
+      {skip_suites, node1, 'T1', [t1B_SUITE,t1D_SUITE], "Not implemented"}.
+      {skip_cases, node1, 'T1', t1A_SUITE, [test3,test4], "Irrelevant"}.
+      {skip_cases, node1, 'T1', t1C_SUITE, [test1], "Ignore"}.
       
-      {suites, node1, t1, all}.
-      {skip_suites, node1, t1, [t1B_SUITE,t1D_SUITE], "Not implemented"}.
-      {skip_cases, node1, t1, t1A_SUITE, [test3,test4], "Irrelevant"}.
-      {skip_cases, node1, t1, t1C_SUITE, [test1], "Ignore"}.
+      {suites, node2, 'T2', [t2B_SUITE,t2C_SUITE]}.
+      {cases, node2, 'T2', t2A_SUITE, [test4,test1,test7]}.
       
-      {suites, node2, t2, [t2B_SUITE,t2C_SUITE]}.
-      {cases, node2, t2, t2A_SUITE, [test4,test1,test7]}.
-      
-      {skip_suites, t3, all, "Not implemented"}.
-    </pre>
+      {skip_suites, 'T3', all, "Not implemented"}.</pre>
 
     <p>This example specifies the same tests as the original example. But 
     now if started with a call to <c>ct_master:run(TestSpecName)</c>, the 
@@ -190,10 +193,6 @@
     name as the Common Test node in question (typically <c>ct@somehost</c> if started
     with the <c>ct_run</c> program), will be performed. Tests without explicit
     node association will always be performed too of course!</p>
-
-    <note><p>It is recommended that absolute paths are used for log directories,
-    config files and test directory aliases in the test specifications so that
-    current working directory settings are not important.</p></note>
   </section>
 
   <section>
diff --git a/lib/common_test/doc/src/ct_run.xml b/lib/common_test/doc/src/ct_run.xml
index 8061c840b0..9cc5495af7 100644
--- a/lib/common_test/doc/src/ct_run.xml
+++ b/lib/common_test/doc/src/ct_run.xml
@@ -36,6 +36,8 @@
     OS command line.
   </comsummary>
 
+  <marker id="top"></marker>
+
   <description>
   <p>The <c>ct_run</c> program is automatically installed with Erlang/OTP
     and Common Test (please see the Installation chapter in the Common
@@ -72,6 +74,10 @@
     following <c>-erl_args</c> on the command line. These directories are added
     to the code path normally (i.e. on specified form)</p>
 
+  <p>Exit status is set before the program ends. Value <c>0</c> indicates a successful
+    test result, <c>1</c> indicates one or more failed or auto-skipped test cases, and
+    <c>2</c> indicates test execution failure.</p>
+
   <p>If <c>ct_run</c> is called with option:</p>
     <pre>-help</pre>
     <p>it prints all valid start flags to stdout.</p>
@@ -112,6 +118,7 @@
 	[-basic_html]
     	[-ct_hooks CTHModule1 CTHOpts1 and CTHModule2 CTHOpts2 and ..
 	 CTHModuleN CTHOptsN]
+	[-exit_status ignore_config]
     </pre>
   </section>
   <section>
@@ -145,6 +152,7 @@
 	[-basic_html]
     	[-ct_hooks CTHModule1 CTHOpts1 and CTHModule2 CTHOpts2 and ..
 	 CTHModuleN CTHOptsN]
+	[-exit_status ignore_config]
     </pre>
   </section>
   <section>
diff --git a/lib/common_test/doc/src/run_test_chapter.xml b/lib/common_test/doc/src/run_test_chapter.xml
index 058b27d622..ea62df27cc 100644
--- a/lib/common_test/doc/src/run_test_chapter.xml
+++ b/lib/common_test/doc/src/run_test_chapter.xml
@@ -178,6 +178,8 @@
       <item><c><![CDATA[-basic_html]]></c>, switches off html enhancements that might not be compatible with older browsers.</item>
       <item><c><![CDATA[-logopts <opts>]]></c>, makes it possible to modify aspects of the logging behaviour, see
         <seealso marker="run_test_chapter#logopts">Log options</seealso> below.</item>
+      <item><c><![CDATA[-verbosity <levels>]]></c>, sets <seealso marker="write_test_chapter#logging">verbosity levels
+      for printouts</seealso>.</item>
     </list>
 
     <note><p>Directories passed to Common Test may have either relative or absolute paths.</p></note>
@@ -196,60 +198,73 @@
 	     the current working directory of the Erlang Runtime System during the test run!</p>
     </note>
     
-    <p>For more information about the <c>ct_run</c> program, see the
-      <seealso marker="install_chapter#general">Installation</seealso> chapter.
-    </p>
-  </section>
-  
-  <section>
-    <title>Running tests from the Web based GUI</title>
-    
-    <p>The web based GUI, VTS, is started with the <c>ct_run</c>
-      program. From the GUI you can load config files, and select
-      directories, suites and cases to run. You can also state the
-      config files, directories, suites and cases on the command line
-      when starting the web based GUI.
-    </p>
-    
+    <p>The <c>ct_run</c> program sets the exit status before shutting down. The following values
+      are defined:</p>
     <list>
-      <item><c>ct_run -vts</c></item>
-      <item><c><![CDATA[ct_run -vts -config <configfilename>]]></c></item>
-      <item><c><![CDATA[ct_run -vts -config <configfilename> -suite <suitewithfullpath>
-	      -case <casename>]]></c></item>
+      <item><c>0</c> indicates a successful testrun, i.e. one without failed or auto-skipped test cases.</item>
+      <item><c>1</c> indicates that one or more test cases have failed, or have been auto-skipped.</item>
+      <item><c>2</c> indicates that the test execution has failed because of e.g. compilation errors, an
+	illegal return value from an info function, etc.</item>
     </list>
+    <p>If auto-skipped test cases should not affect the exit status, you may change the default
+      behaviour using start flag:</p>
+    <pre>-exit_status ignore_config</pre>
     
-    <p>From the GUI you can run tests and view the result and the logs.
+    <p>For more information about the <c>ct_run</c> program, see the
+      <seealso marker="ct_run#top">Reference Manual</seealso> and the
+      <seealso marker="install_chapter#general">Installation</seealso> chapter.
     </p>
-    
-    <p>Note that <c>ct_run -vts</c> will try to open the Common Test start
-      page in an existing web browser window or start the browser if it is
-      not running. Which browser should be started may be specified with
-      the browser start command option:</p>
-      <p><c><![CDATA[ct_run -vts -browser <browser_start_cmd>]]></c></p>
-      <p>Example:</p>
-      <p><c><![CDATA[$ ct_run -vts -browser 'firefox&']]></c></p>
-      <p>Note that the browser must run as a separate OS process or VTS will hang!</p>
-      <p>If no specific browser start command is specified, Firefox will
-        be the default browser on Unix platforms and Internet Explorer on Windows.
-	If Common Test fails to start a browser automatically, or <c>'none'</c> is
-	specified as the value for -browser (i.e. <c>-browser none</c>), start your
-	favourite browser manually and type in the URL that Common Test
-	displays in the shell.</p>    
   </section>
-  
+    
   <section>
     <title>Running tests from the Erlang shell or from an Erlang program</title>
     
     <p>Common Test provides an Erlang API for running tests. The main (and most
       flexible) function for specifying and executing tests is called
-      <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>. This function takes the same start parameters as
-      the <c>ct_run</c> program described above, only the flags are instead
+      <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>.
+      This function takes the same start parameters as
+      the <c><seealso marker="run_test_chapter#ct_run">ct_run</seealso></c>
+      program described above, only the flags are instead
       given as options in a list of key-value tuples. E.g. a test specified 
       with <c>ct_run</c> like:</p>
+
       <p><c>$ ct_run -suite ./my_SUITE -logdir ./results</c></p> 
       <p>is with <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c> specified as:</p>
       <p><c>1> ct:run_test([{suite,"./my_SUITE"},{logdir,"./results"}]).</c></p>
-      <p>For detailed documentation, please see the <c>ct</c> manual page.</p>    
+
+      <p>The function returns the test result, represented by the tuple:
+	<c>{Ok,Failed,{UserSkipped,AutoSkipped}}</c>, where each element is an
+	integer. If test execution fails, the function returns the tuple:
+	<c>{error,Reason}</c>, where the term <c>Reason</c> explains the
+	failure.</p>
+
+	<section>
+	  <title>Releasing the Erlang shell</title>
+	  <p>During execution of tests, started with
+	  <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>,
+	  the Erlang shell process, controlling stdin, will remain the top
+	  level process of the Common Test system of processes. The result
+	  is that the Erlang shell is not available for interaction during
+	  the test run. If this is not desirable, maybe because the shell is needed
+	  for debugging purposes or for interaction with the SUT during test
+	  execution, you may set the <c>release_shell</c> start option to
+	  <c>true</c> (in the call to <c>ct:run_test/1</c> or by
+	  using the corresponding test specification term, see below). This will
+	  make Common Test release the shell immediately after the test suite
+	  compilation stage. To accomplish this, a test runner process
+	  is spawned to take control of the test execution, and the effect is that
+	  <c>ct:run_test/1</c> returns the pid of this process rather than the
+	  test result - which instead is printed to tty at the end of the test run.</p>
+	  <note><p>Note that in order to use the
+	  <c><seealso marker="ct#break-1">ct:break/1/2</seealso></c> and
+	  <c><seealso marker="ct#continue-0">ct:continue/0/1</seealso></c> functions,
+	  <c>release_shell</c> <em>must</em> be set to <c>true</c>.</p></note>
+	</section>
+        
+      <p>For detailed documentation about
+        <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>,
+        please see the
+        <c><seealso marker="ct#run_test-1">ct</seealso></c> manual page.</p>    
   </section>
   
   <section>
@@ -353,31 +368,34 @@
 
   <marker id="test_specifications"></marker>
   <section>
-    <title>Using test specifications</title>
+    <title>Test Specifications</title>
     
     <p>The most flexible way to specify what to test, is to use a so
       called test specification. A test specification is a sequence of
-      Erlang terms. The terms may be declared in a text file or passed
-      to the test server at runtime as a list
-      (see <c>run_testspec/1</c> in the manual page
-      for <c>ct</c>). There are two general types of terms:
-      configuration terms and test specification terms.</p>
+      Erlang terms. The terms are normally declared in a text file (see
+      <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>), but
+      may also be passed to Common Test on the form of a list (see
+      <c><seealso marker="ct#run_testspec-1">ct:run_testspec/1</seealso></c>).
+      There are two general types of terms: configuration terms and test
+      specification terms.</p>
     <p>With configuration terms it is possible to e.g. label the test
       run (similar to <c>ct_run -label</c>), evaluate arbitrary expressions
-      before starting a test, import configuration
-      data (similar to
-      <c>ct_run -config/-userconfig</c>), specify HTML log directories (similar
-      to
-      <c>ct_run -logdir</c>), give aliases to test nodes and test
-      directories (to make a specification easier to read and
-      maintain), enable code coverage analysis (see
-      the <seealso marker="cover_chapter#cover">Code Coverage
-      Analysis</seealso> chapter) and specify event_handler plugins
-      (see the <seealso marker="event_handler_chapter#event_handling">
-      Event Handling</seealso> chapter). There is also a term for
-      specifying include directories that should be passed on to the
-      compiler when automatic compilation is performed (similar
-      to <c>ct_run -include</c>, see above).</p>
+      before starting the test, import configuration data (similar to
+      <c>ct_run -config/-userconfig</c>), specify the top level HTML log
+      directory (similar to <c>ct_run -logdir</c>), enable code coverage
+      analysis (similar to <c>ct_run -cover</c>), install Common Test Hooks
+      (similar to <c>ct_run -ch_hooks</c>), install event_handler plugins
+      (similar to <c>ct_run -event_handler</c>), specify include directories
+      that should be passed to the compiler for automatic compilation
+      (similar to <c>ct_run -include</c>), disable the auto compilation
+      feature (similar to <c>ct_run -no_auto_compile</c>), set verbosity
+      levels (similar to <c>ct_run -verbosity</c>), and more.</p>
+    <p>Configuration terms can be combined with <c>ct_run</c> start flags,
+      or <c>ct:run_test/1</c> options. The result will for some flags/options
+      and terms be that the values are merged (e.g. configuration files,
+      include directories, verbosity levels, silent connections), and for
+      others that the start flags/options override the test specification
+      terms (e.g. log directory, label, style sheet, auto compilation).</p>
     <p>With test specification terms it is possible to state exactly
       which tests should run and in which order. A test term specifies
       either one or more suites, one or more test case groups, or one
@@ -392,11 +410,12 @@
       S, is a test of all cases in S. However, if a term specifying
       test case X and Y in S is merged with a term specifying case Z
       in S, the result is a test of X, Y and Z in S. To disable this
-      behaviour, it is possible in test specification to set the 
-      <c>merge_tests</c> term to <c>false</c>.</p>
+      behaviour, i.e. to instead perform each test sequentially in a "script-like"
+      manner, the term <c>merge_tests</c> can be set to <c>false</c> in
+      the test specification.</p>
     <p>A test term can also specify one or more test suites, groups,
       or test cases to be skipped. Skipped suites, groups and cases
-      are not executed and show up in the HTML test log files as
+      are not executed and show up in the HTML log files as
       SKIPPED.</p>
     <p>When a test case group is specified, the resulting test
       executes the
@@ -429,12 +448,27 @@
       Testing). The node parameters in the <c>init</c> term are only
       relevant in the latter (see the
       <seealso marker="ct_master_chapter#test_specifications">Large
-      Scale Testing</seealso> chapter for information). For details on
-      the event_handler term, see the
+      Scale Testing</seealso> chapter for information). For more information
+      about the various terms, please see the corresponding sections in the
+      User's Guide, such as e.g. the
+      <seealso marker="run_test_chapter#ct_run"><c>ct_run</c>
+      program</seealso> for an overview of available start flags
+      (since most flags have a corresponding configuration term), and
+      more detailed explanation of e.g.
+      <seealso marker="write_test_chapter#logging">Logging</seealso>
+      (for the <c>verbosity</c>, <c>stylesheet</c> and <c>basic_html</c> terms),
+      <seealso marker="config_file_chapter#top">External Configuration Data</seealso>
+      (for the <c>config</c> and <c>userconfig</c> terms),      
       <seealso marker="event_handler_chapter#event_handling">Event
-      Handling</seealso> chapter.</p>
+      Handling</seealso> (for the <c>event_handler</c> term),
+      <seealso marker="ct_hooks_chapter#installing">Common Test Hooks</seealso>
+      (for the <c>ct_hooks</c> term), etc.</p>
       <p>Config terms:</p>
     <pre>
+      {merge_tests, Bool}.
+
+      {define, Constant, Value}.
+
       {node, NodeAlias, Node}.
 
       {init, InitOptions}.
@@ -443,6 +477,15 @@
       {label, Label}.
       {label, NodeRefs, Label}.
 
+      {verbosity, VerbosityLevels}.
+      {verbosity, NodeRefs, VerbosityLevels}.
+
+      {stylesheet, CSSFile}.
+      {stylesheet, NodeRefs, CSSFile}.
+
+      {silent_connections, ConnTypes}.
+      {silent_connections, NodeRefs, ConnTypes}.
+
       {multiply_timetraps, N}.
       {multiply_timetraps, NodeRefs, N}.
 
@@ -455,19 +498,23 @@
       {include, IncludeDirs}.
       {include, NodeRefs, IncludeDirs}.
 
+      {auto_compile, Bool},
+      {auto_compile, NodeRefs, Bool},
+
       {config, ConfigFiles}.
+      {config, ConfigDir, ConfigBaseNames}.
       {config, NodeRefs, ConfigFiles}.
+      {config, NodeRefs, ConfigDir, ConfigBaseNames}.
 
       {userconfig, {CallbackModule, ConfigStrings}}.
       {userconfig, NodeRefs, {CallbackModule, ConfigStrings}}.
       
-      {alias, DirAlias, Dir}.
-
-      {merge_tests, Bool}.
-      
       {logdir, LogDir}.                                        
       {logdir, NodeRefs, LogDir}.
 
+      {logopts, LogOpts}.
+      {logopts, NodeRefs, LogOpts}.
+
       {create_priv_dir, PrivDirOption}.
       {create_priv_dir, NodeRefs, PrivDirOption}.
       
@@ -480,83 +527,176 @@
       {ct_hooks, NodeRefs, CTHModules}.
 
       {enable_builtin_hooks, Bool}.
-    </pre>
+      
+      {basic_html, Bool}.
+      {basic_html, NodeRefs, Bool}.
+
+      {release_shell, Bool}.</pre>
+
       <p>Test terms:</p>
     <pre>
-      {suites, DirRef, Suites}.                                
-      {suites, NodeRefs, DirRef, Suites}.
+      {suites, Dir, Suites}.                                
+      {suites, NodeRefs, Dir, Suites}.
       
-      {groups, DirRef, Suite, Groups}.
-      {groups, NodeRefsDirRef, Suite, Groups}.
+      {groups, Dir, Suite, Groups}.
+      {groups, NodeRefs, Dir, Suite, Groups}.
 
-      {groups, DirRef, Suite, GroupSpec, {cases,Cases}}.
-      {groups, NodeRefsDirRef, Suite, GroupSpec, {cases,Cases}}.
+      {groups, Dir, Suite, GroupSpec, {cases,Cases}}.
+      {groups, NodeRefs, Dir, Suite, GroupSpec, {cases,Cases}}.
 
-      {cases, DirRef, Suite, Cases}.                           
-      {cases, NodeRefs, DirRef, Suite, Cases}.
+      {cases, Dir, Suite, Cases}.                           
+      {cases, NodeRefs, Dir, Suite, Cases}.
 
-      {skip_suites, DirRef, Suites, Comment}.
-      {skip_suites, NodeRefs, DirRef, Suites, Comment}.
+      {skip_suites, Dir, Suites, Comment}.
+      {skip_suites, NodeRefs, Dir, Suites, Comment}.
 
-      {skip_groups, DirRef, Suite, GroupNames, Comment}.
-      {skip_groups, NodeRefs, DirRef, Suite, GroupNames, Comment}.
+      {skip_groups, Dir, Suite, GroupNames, Comment}.
+      {skip_groups, NodeRefs, Dir, Suite, GroupNames, Comment}.
       
-      {skip_cases, DirRef, Suite, Cases, Comment}.
-      {skip_cases, NodeRefs, DirRef, Suite, Cases, Comment}.
-    </pre>
+      {skip_cases, Dir, Suite, Cases, Comment}.
+      {skip_cases, NodeRefs, Dir, Suite, Cases, Comment}.</pre>
+
       <p>Types:</p>
     <pre>
-      NodeAlias     = atom()
-      InitOptions   = term()
-      Node          = node()
-      NodeRef       = NodeAlias | Node | master
-      NodeRefs      = all_nodes | [NodeRef] | NodeRef
-      N             = integer()
-      Bool          = true | false
-      CoverSpecFile = string()
-      IncludeDirs   = string() | [string()]
-      ConfigFiles   = string() | [string()]
-      DirAlias      = atom()
-      Dir           = string()
-      LogDir        = string()
-      PrivDirOption = auto_per_run | auto_per_tc | manual_per_tc
-      EventHandlers = atom() | [atom()]
-      InitArgs      = [term()]
-      CTHModules    = [CTHModule | {CTHModule, CTHInitArgs} | {CTHModule, CTHInitArgs, CTHPriority}]
-      CTHModule     = atom()
-      CTHInitArgs   = term()
-      DirRef        = DirAlias | Dir
-      Suites        = atom() | [atom()] | all
-      Suite         = atom()
-      Groups        = GroupSpec | [GroupSpec] | all
-      GroupSpec     = GroupName | {GroupName,Properties} | {GroupName,Properties,GroupSpec}
-      GroupName     = atom()
-      GroupNames    = GroupName | [GroupName]
-      Cases         = atom() | [atom()] | all
-      Comment       = string() | ""
-    </pre>
-    <p>Example:</p>
+      Bool            = true | false
+      Constant        = atom()
+      Value           = term()
+      NodeAlias       = atom()
+      Node            = node()
+      NodeRef         = NodeAlias | Node | master
+      NodeRefs        = all_nodes | [NodeRef] | NodeRef
+      InitOptions     = term()
+      Label           = atom() | string()
+      VerbosityLevels = integer() | [{Category,integer()}]
+      Category        = atom()
+      CSSFile         = string()
+      ConnTypes       = all | [atom()]
+      N               = integer()
+      CoverSpecFile   = string()
+      IncludeDirs     = string() | [string()]
+      ConfigFiles     = string() | [string()]
+      ConfigDir       = string()
+      ConfigBaseNames = string() | [string()]
+      CallbackModule  = atom()
+      ConfigStrings   = string() | [string()]
+      LogDir          = string()
+      LogOpts         = [term()]
+      PrivDirOption   = auto_per_run | auto_per_tc | manual_per_tc
+      EventHandlers   = atom() | [atom()]
+      InitArgs        = [term()]
+      CTHModules      = [CTHModule | {CTHModule, CTHInitArgs} | {CTHModule, CTHInitArgs, CTHPriority}]
+      CTHModule       = atom()
+      CTHInitArgs     = term()
+      Dir             = string()
+      Suites          = atom() | [atom()] | all
+      Suite           = atom()
+      Groups          = GroupSpec | [GroupSpec] | all
+      GroupSpec       = GroupName | {GroupName,Properties} | {GroupName,Properties,GroupSpec}
+      GroupName       = atom()
+      GroupNames      = GroupName | [GroupName]
+      Cases           = atom() | [atom()] | all
+      Comment         = string() | ""</pre>
+
+    <p>The difference between the <c>config</c> terms above, is that with
+      <c>ConfigDir</c>, <c>ConfigBaseNames</c> is a list of base names,
+      i.e. without directory paths. <c>ConfigFiles</c> must be full names,
+      including paths. E.g, these two terms have the same meaning:</p>
     <pre>
-      {logdir, "/home/test/logs"}.
+      {config, ["/home/testuser/tests/config/nodeA.cfg",
+                "/home/testuser/tests/config/nodeB.cfg"]}.
+
+      {config, "/home/testuser/tests/config", ["nodeA.cfg","nodeB.cfg"]}.</pre>
+
+    <note><p>Any relative paths specified in the test specification, will be
+	relative to the directory which contains the test specification file, if
+	<c>ct_run -spec TestSpecFile ...</c> or
+	<c>ct:run:test([{spec,TestSpecFile},...])</c>
+	executes the test. The path will be relative to the top level log directory, if
+	<c>ct:run:testspec(TestSpec)</c> executes the test.</p></note>
       
-      {config, "/home/test/t1/cfg/config.cfg"}.
-      {config, "/home/test/t2/cfg/config.cfg"}.
-      {config, "/home/test/t3/cfg/config.cfg"}.
+    <p>The <c>define</c> term introduces a constant, which is used to
+      replace the name <c>Constant</c> with <c>Value</c>, wherever it's found in
+      the test specification. This replacement happens during an initial iteration
+      through the test specification. Constants may be used anywhere in the test
+      specification, e.g. in arbitrary lists and tuples, and even in strings
+      and inside the value part of other constant definitions! A constant can
+      also be part of a node name, but that is the only place where a constant
+      can be part of an atom.</p>
+    
+    <note><p>For the sake of readability, the name of the constant must always
+	begin with an upper case letter, or a <c>$</c>, <c>?</c>, or <c>_</c>.
+	This also means that it must always be single quoted (obviously, since
+	the constant name is actually an atom, not text).</p></note>
+
+    <p>The main benefit of constants is that they can be used to reduce the size
+      (and avoid repetition) of long strings, such as file paths. Compare these
+      terms:</p>
+
+    <pre>
+      %% 1a. no constant
+      {config, "/home/testuser/tests/config", ["nodeA.cfg","nodeB.cfg"]}.
+      {suites, "/home/testuser/tests/suites", all}.
       
-      {alias, t1, "/home/test/t1"}.
-      {alias, t2, "/home/test/t2"}.
-      {alias, t3, "/home/test/t3"}.
+      %% 1b. with constant
+      {define, 'TESTDIR', "/home/testuser/tests"}.
+      {config, "'TESTDIR'/config", ["nodeA.cfg","nodeB.cfg"]}.
+      {suites, "'TESTDIR'/suites", all}.
+
+      %% 2a. no constants
+      {config, [testnode@host1, testnode@host2], "../config", ["nodeA.cfg","nodeB.cfg"]}.
+      {suites, [testnode@host1, testnode@host2], "../suites", [x_SUITE, y_SUITE]}.
+
+      %% 2b. with constants
+      {define, 'NODE', testnode}.
+      {define, 'NODES', ['NODE'@host1, 'NODE'@host2]}.
+      {config, 'NODES', "../config", ["nodeA.cfg","nodeB.cfg"]}.
+      {suites, 'NODES', "../suites", [x_SUITE, y_SUITE]}.</pre>
+
+    <p>Constants make the test specification term <c>alias</c>, in previous
+      versions of Common Test, redundant. This term has been deprecated but will
+      remain supported in upcoming Common Test releases. Replacing <c>alias</c>
+      terms with <c>define</c> is strongly recommended though! Here's an example
+      of such a replacement:</p>
+
+    <pre>
+      %% using the old alias term
+      {config, "/home/testuser/tests/config/nodeA.cfg"}.
+      {alias, suite_dir, "/home/testuser/tests/suites"}.
+      {groups, suite_dir, x_SUITE, group1}.
+
+      %% replacing with constants
+      {define, 'TestDir', "/home/testuser/tests"}.
+      {define, 'CfgDir', "'TestDir'/config"}.
+      {define, 'SuiteDir', "'TestDir'/suites"}.
+      {config, 'CfgDir', "nodeA.cfg"}.
+      {groups, 'SuiteDir', x_SUITE, group1}.</pre>
+
+    <p>Actually, constants could well replace the <c>node</c> term too, but
+      this still has declarative value, mainly when used in combination
+      with <c>NodeRefs == all_nodes</c> (see types above).</p>
+
+    <p>Here follows a simple test specification example:</p>
+    <pre>
+      {define, 'Top', "/home/test"}.
+      {define, 'T1', "'Top'/t1"}.
+      {define, 'T2', "'Top'/t2"}.
+      {define, 'T3', "'Top'/t3"}.
+      {define, 'CfgFile', "config.cfg"}.
+
+      {logdir, "'Top'/logs"}.
       
-      {suites, t1, all}.
-      {skip_suites, t1, [t1B_SUITE,t1D_SUITE], "Not implemented"}.
-      {skip_cases, t1, t1A_SUITE, [test3,test4], "Irrelevant"}.
-      {skip_cases, t1, t1C_SUITE, [test1], "Ignore"}.
+      {config, ["'T1'/'CfgFile'", "'T2'/'CfgFile'", "'T3'/'CfgFile'"]}.
       
-      {suites, t2, [t2B_SUITE,t2C_SUITE]}.
-      {cases, t2, t2A_SUITE, [test4,test1,test7]}.
+      {suites, 'T1', all}.
+      {skip_suites, 'T1', [t1B_SUITE,t1D_SUITE], "Not implemented"}.
+      {skip_cases, 'T1', t1A_SUITE, [test3,test4], "Irrelevant"}.
+      {skip_cases, 'T1', t1C_SUITE, [test1], "Ignore"}.
       
-      {skip_suites, t3, all, "Not implemented"}.
-    </pre>
+      {suites, 'T2', [t2B_SUITE,t2C_SUITE]}.
+      {cases, 'T2', t2A_SUITE, [test4,test1,test7]}.
+      
+      {skip_suites, 'T3', all, "Not implemented"}.</pre>
+
     <p>The example specifies the following:</p>
     <list>
       <item>The specified logdir directory will be used for storing 
@@ -564,8 +704,6 @@
 	date and time).</item>
       <item>The variables in the specified test system config files will be 
 	imported for the test.</item>
-      <item>Aliases are given for three test system directories. The suites in
-	this example are stored in "/home/test/tX/test".</item>
       <item>The first test to run includes all suites for system t1. Excluded from
 	the test are however the t1B and t1D suites. Also test cases test3 and
 	test4 in t1A as well as the test1 case in t1C are excluded from
@@ -590,8 +728,46 @@
       If <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c> is used for starting the tests, the relaxed scanner
       mode is enabled by means of the tuple: <c>{allow_user_terms,true}</c></p>
   </section>
+
+  <section>
+    <title>Running tests from the Web based GUI</title>
+    
+    <p>The web based GUI, VTS, is started with the
+      <c><seealso marker="run_test_chapter#ct_run">ct_run</seealso></c>
+      program. From the GUI you can load config files, and select
+      directories, suites and cases to run. You can also state the
+      config files, directories, suites and cases on the command line
+      when starting the web based GUI.
+    </p>
+    
+    <list>
+      <item><c>ct_run -vts</c></item>
+      <item><c><![CDATA[ct_run -vts -config <configfilename>]]></c></item>
+      <item><c><![CDATA[ct_run -vts -config <configfilename> -suite <suitewithfullpath>
+	      -case <casename>]]></c></item>
+    </list>
+    
+    <p>From the GUI you can run tests and view the result and the logs.
+    </p>
+    
+    <p>Note that <c>ct_run -vts</c> will try to open the Common Test start
+      page in an existing web browser window or start the browser if it is
+      not running. Which browser should be started may be specified with
+      the browser start command option:</p>
+      <p><c><![CDATA[ct_run -vts -browser <browser_start_cmd>]]></c></p>
+      <p>Example:</p>
+      <p><c><![CDATA[$ ct_run -vts -browser 'firefox&']]></c></p>
+      <p>Note that the browser must run as a separate OS process or VTS will hang!</p>
+      <p>If no specific browser start command is specified, Firefox will
+        be the default browser on Unix platforms and Internet Explorer on Windows.
+	If Common Test fails to start a browser automatically, or <c>'none'</c> is
+	specified as the value for -browser (i.e. <c>-browser none</c>), start your
+	favourite browser manually and type in the URL that Common Test
+	displays in the shell.</p>    
+  </section>
   
   <section>
+    <marker id="log_files"></marker>
     <title>Log files</title>
     
     <p>As the execution of the test suites proceed, events are logged in
@@ -719,17 +895,30 @@
 	  <p>instead of each <c>x</c> printed on a new line, which is the default behaviour.</p>
 	</section>
 
+	<section>
+	  <marker id="table_sorting"></marker>
+	  <title>Sorting HTML table columns</title>
+	  <p>By clicking the name in the column header of any table (e.g. "Ok", "Case", "Time", etc),
+	    the table rows are sorted in whatever order makes sense for the type of value (e.g.
+	    numerical for "Ok" or "Time", and alphabetical for "Case"). The sorting is performed
+	    by means of JavaScript code, automatically inserted into the HTML log files. Common Test
+	    uses the <url href="http://jquery.com">jQuery</url> library and the
+	    <url href="http://tablesorter.com">tablesorter</url> plugin, with customized sorting
+	    functions, for this implementation.</p>
+	</section>
       </section>
   
       <section>
 	<marker id="html_stylesheet"></marker>
 	<title>HTML Style Sheets</title>
-	<p>Common Test uses a CSS file to control the look of the HTML
-	  files generated during test runs. If, for some reason, the
-	  log files are not displayed correctly in the HTML browser of your
-	  choice, or you prefer the "pre Common Test v1.6 look"
-	  of the log files (i.e. not using CSS), use the start flag/option
-	  <c>basic_html</c> to revert to the old style.</p>
+	<p>Common Test uses an HTML Style Sheet (CSS file) to control the look of
+	  the HTML log files generated during test runs. If, for some reason, the
+	  log files are not displayed correctly in the browser of your
+	  choice, or you prefer a more primitive ("pre Common Test v1.6") look
+	  of the logs, use the start flag/option:</p>
+	<pre>basic_html</pre>
+	<p>This disables the use of Style Sheets, as well as JavaScripts (see
+	  table sorting above).</p>
 	  
 	<p>Common Test includes an <em>optional</em> feature to allow
 	  user HTML style sheets for customizing printouts. The
@@ -882,75 +1071,82 @@
   <section>
     <marker id="silent_connections"></marker>
       <title>Silent Connections</title>
-      <p>The protocol handling processes in Common Test, implemented by ct_telnet, ct_ftp etc,
-	do verbose printing to the test case logs. This can be switched off by means
-	of the <c>-silent_connections</c> flag:</p>
+      <p>The protocol handling processes in Common Test, implemented by ct_telnet,
+      ct_ssh, ct_ftp etc, do verbose printing to the test case logs. This can be switched off
+      by means of the <c>-silent_connections</c> flag:</p>
       
       <pre>
 	ct_run -silent_connections [conn_types]
       </pre>
       
-      <p>where <c>conn_types</c> specifies <c>telnet, ftp, rpc</c> and/or <c>snmp</c>.</p>
+      <p>where <c>conn_types</c> specifies <c>ssh, telnet, ftp, rpc</c> and/or <c>snmp</c>.</p>
       
       <p>Example:</p>
       
       <pre>
-	ct_run ... -silent_connections telnet ftp</pre>
-      <p>switches off logging for telnet and ftp connections.</p>
+	ct_run ... -silent_connections ssh telnet</pre>
+      <p>switches off logging for ssh and telnet connections.</p>
       
       <pre>
 	ct_run ... -silent_connections</pre>
       <p>switches off logging for all connection types.</p>
       
       
-      <p>Basic and important information such as opening and closing a connection,
-	fatal communication error and reconnection attempts will always be printed even 
-	if logging has been suppressed for the connection type in question. However, operations
-	such as sending and receiving data may be performed silently.</p>
+      <p>Fatal communication error and reconnection attempts will always be printed even 
+      if logging has been suppressed for the connection type in question. However, operations
+      such as sending and receiving data will be performed silently.</p>
       
       <p>It is possible to also specify <c>silent_connections</c> in a test suite. This is
 	accomplished by returning a tuple, <c>{silent_connections,ConnTypes}</c>, in the
 	<c>suite/0</c> or test case info list. If <c>ConnTypes</c> is a list of atoms 
-	(<c>telnet, ftp, rpc</c> and/or <c>snmp</c>), output for any corresponding connections 
+	(<c>ssh, telnet, ftp, rpc</c> and/or <c>snmp</c>), output for any corresponding connections 
 	will be suppressed. Full logging is per default enabled for any connection of type not 
 	specified in <c>ConnTypes</c>. Hence, if <c>ConnTypes</c> is the empty list, logging 
 	is enabled for all connections.</p>
       
-      <p>The <c>silent_connections</c> setting returned from a test case info function overrides,
-	for the test case in question, any setting made with <c>suite/0</c> (which is the setting 
-	used for all cases in the suite). Example:</p>
+	<p>Example:</p>
       
       <pre>
 	
 	-module(my_SUITE).
+
+	suite() -> [..., {silent_connections,[telnet,ssh]}, ...].
+
 	...
-	suite() -> [..., {silent_connections,[telnet,ftp]}, ...].
-	...
+
 	my_testcase1() ->
-	[{silent_connections,[ftp]}].
+	    [{silent_connections,[ssh]}].
+
 	my_testcase1(_) ->
-	...
+	    ...
+
 	my_testcase2(_) ->
-	...
+	    ...
       </pre>
       
       <p>In this example, <c>suite/0</c> tells Common Test to suppress
-	printouts from telnet and ftp connections. This is valid for
+	printouts from telnet and ssh connections. This is valid for
 	all test cases. However, <c>my_testcase1/0</c> specifies that
-	for this test case, only ftp should be silent. The result is
+	for this test case, only ssh should be silent. The result is
 	that <c>my_testcase1</c> will get telnet info (if any) printed
-	in the log, but not ftp info. <c>my_testcase2</c> will get no
+	in the log, but not ssh info. <c>my_testcase2</c> will get no
 	info from either connection printed.</p>
       
-      <p>The <c>-silent_connections</c> tag (or
-	<c>silent_connections</c> tagged tuple in the call to
-	<c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>) overrides any settings in the test
-	suite.</p>
+	<p><c>silent_connections</c> may also be specified with a term
+	in a test specification
+	(see <seealso marker="run_test_chapter#test_specifications">Test
+	Specifications</seealso>). Connections provided with the
+	<c>silent_connections</c> start	flag/option, will be merged with
+	any connections listed in the test specification.</p>
+
+	<p>The <c>silent_connections</c> start flag/option and test
+	specification term, overrides any settings made by the info functions
+	inside the test suite.</p>
       
-      <p>Note that in the current Common Test version, the
+      <note><p>Note that in the current Common Test version, the
 	<c>silent_connections</c> feature only works for telnet
-	connections. Support for other connection types will be added
-	in future Common Test versions.</p>
+	and ssh connections! Support for other connection types will be added
+	in future Common Test versions.</p></note>
       
   </section>
 </chapter>
diff --git a/lib/common_test/doc/src/write_test_chapter.xml b/lib/common_test/doc/src/write_test_chapter.xml
index 198f79126c..248d7de8b6 100644
--- a/lib/common_test/doc/src/write_test_chapter.xml
+++ b/lib/common_test/doc/src/write_test_chapter.xml
@@ -47,7 +47,7 @@
       module for details about these functions.</p>
     
     <p>The CT application also includes other modules named 
-      <c><![CDATA[ct_<something>]]></c> that
+      <c><![CDATA[ct_<component>]]></c> that
       provide various support, mainly simplified use of communication
       protocols such as rpc, snmp, ftp, telnet, etc.</p>
 
@@ -935,6 +935,99 @@
   </section>
 
   <section>
+    <marker id="logging"></marker>
+    <title>Logging - categories and verbosity levels</title>
+    <p>Common Test provides three main functions for printing strings:</p>
+    <list>
+      <item><c>ct:log(Category, Importance, Format, Args)</c></item>
+      <item><c>ct:print(Category, Importance, Format, Args)</c></item>
+      <item><c>ct:pal(Category, Importance, Format, Args)</c></item>
+    </list>
+    <p>The <c>log/1/2/3/4</c> function will print a string to the test case
+    log file. The <c>print/1/2/3/4</c> function will print the string to screen,
+    and the <c>pal/1/2/3/4</c> function will print the same string both to file and
+    screen. (The functions are documented in the <c>ct</c> reference manual).</p>
+
+    <p>The optional <c>Category</c> argument may be used to categorize the
+    log printout, and categories can be used for two things:</p>
+    <list>
+      <item>To compare the importance of the printout to a specific
+      verbosity level, and</item>
+      <item>to format the printout according to a user specific HTML
+      Style Sheet (CSS).</item>
+    </list>
+
+    <p>The <c>Importance</c> argument specifies a level of importance
+    which, compared to a verbosity level (general and/or set per category),
+    determines if the printout should be visible or not. <c>Importance</c>
+    is an arbitrary integer in the range 0..99. Pre-defined constants
+    exist in the <c>ct.hrl</c> header file. The default importance level,
+    <c>?STD_IMPORTANCE</c> (used if the <c>Importance</c> argument is not
+    provided), is 50. This is also the importance used for standard IO, e.g.
+    from printouts made with <c>io:format/2</c>, <c>io:put_chars/1</c>, etc.</p>
+
+    <p><c>Importance</c> is compared to a verbosity level set by means of the
+    <c>verbosity</c> start flag/option. The verbosity level can be set per
+    category and/or generally. The default verbosity level, <c>?STD_VERBOSITY</c>,
+    is 50, i.e. all standard IO gets printed. If a lower verbosity level is set,
+    standard IO printouts will be ignored. Common Test performs the following test:</p>
+    <pre>Importance >= (100-VerbosityLevel)</pre>
+    <p>This also means that verbosity level 0 effectively turns all logging off
+    (with the exception of printouts made by Common Test itself).</p>
+
+    <p>The general verbosity level is not associated with any particular
+    category. This level sets the threshold for the standard IO printouts,
+    uncategorized <c>ct:log/print/pal</c> printouts, as well as
+    printouts for categories with undefined verbosity level.</p>
+
+    <p>Example:</p>
+    <pre>
+
+      Some printouts during test case execution:
+
+        io:format("1. Standard IO, importance = ~w~n", [?STD_IMPORTANCE]),
+        ct:log("2. Uncategorized, importance = ~w", [?STD_IMPORTANCE]),
+        ct:log(info, "3. Categorized info, importance = ~w", [?STD_IMPORTANCE]]),
+        ct:log(info, ?LOW_IMPORTANCE, "4. Categorized info, importance = ~w", [?LOW_IMPORTANCE]),
+        ct:log(error, "5. Categorized error, importance = ~w", [?HI_IMPORTANCE]),
+        ct:log(error, ?HI_IMPORTANCE, "6. Categorized error, importance = ~w", [?MAX_IMPORTANCE]),
+
+      If starting the test without specifying any verbosity levels:
+
+        $ ct_run ...
+
+      the following gets printed:
+      
+        1. Standard IO, importance = 50
+        2. Uncategorized, importance = 50
+        3. Categorized info, importance = 50
+        5. Categorized error, importance = 75
+        6. Categorized error, importance = 99
+
+      If starting the test with:
+        
+        $ ct_run -verbosity 1 and info 75
+      
+      the following gets printed:
+
+        3. Categorized info, importance = 50
+	4. Categorized info, importance = 25
+        6. Categorized error, importance = 99
+    </pre>
+
+    <p>How categories can be mapped to CSS tags is documented in the 
+    <seealso marker="run_test_chapter#html_stylesheet">Running Tests</seealso>
+    chapter.</p>
+
+    <p>The <c>Format</c> and <c>Args</c> arguments in <c>ct:log/print/pal</c> are
+    always passed on to the <c>io:format/3</c> function in <c>stdlib</c>
+    (please see the <c>io</c> manual page for details).</p>
+    
+    <p>For more information about log files, please see the
+    <seealso marker="run_test_chapter#log_files">Running Tests</seealso> chapter.</p>
+  </section>
+  
+  <section>
     <title>Illegal dependencies</title>
 
     <p>Even though it is highly efficient to write test suites with
@@ -944,7 +1037,6 @@
       Erlang/OTP test suites.</p>
 
     <list>
-
 	<item>Depending on current directory, and writing there:<br></br>
 	    
 	    <p>This is a common error in test suites. It is assumed that
@@ -956,19 +1048,10 @@
 	    </p>
 	</item>
 
-	<item>Depending on the Clearcase (file version control system) 
-	  paths and files:<br></br>
-	    
-	    <p>The test suites are stored in Clearcase but are not 
-	      (necessarily) run within this environment. The directory 
-	      structure may vary from test run to test run.
-	    </p>
-	</item>
-
 	<item>Depending on execution order:<br></br>
 	
-	    <p>During development of test suites, no assumption should be made
-	    (preferrably) about the execution order of the test cases or suites.
+	    <p>During development of test suites, no assumption should preferrably
+	    be made about the execution order of the test cases or suites.
 	    E.g. a test case should not assume that a server it depends on,
 	    has already been started by a previous test case. There are
 	    several reasons for this:
diff --git a/lib/common_test/src/ct.erl b/lib/common_test/src/ct.erl
index aa8813c391..455fd1e4f1 100644
--- a/lib/common_test/src/ct.erl
+++ b/lib/common_test/src/ct.erl
@@ -25,24 +25,24 @@
 %%%
 %%% <p><strong>Test Suite Support Macros</strong></p>
 %%%
-%%% <p>The <code>config</code> macro is defined in <code>ct.hrl</code>. This
+%%% <p>The <c>config</c> macro is defined in <c>ct.hrl</c>. This
 %%% macro should be used to retrieve information from the
-%%% <code>Config</code> variable sent to all test cases. It is used with two
+%%% <c>Config</c> variable sent to all test cases. It is used with two
 %%% arguments, where the first is the name of the configuration
-%%% variable you wish to retrieve, and the second is the <code>Config</code>
+%%% variable you wish to retrieve, and the second is the <c>Config</c>
 %%% variable supplied to the test case.</p>
 %%%
 %%% <p>Possible configuration variables include:</p>
 %%% <ul>
-%%%   <li><code>data_dir</code>  - Data file directory.</li>
-%%%   <li><code>priv_dir</code>  - Scratch file directory.</li>
-%%%   <li>Whatever added by <code>init_per_suite/1</code> or
-%%%   <code>init_per_testcase/2</code> in the test suite.</li>
+%%%   <li><c>data_dir</c>  - Data file directory.</li>
+%%%   <li><c>priv_dir</c>  - Scratch file directory.</li>
+%%%   <li>Whatever added by <c>init_per_suite/1</c> or
+%%%   <c>init_per_testcase/2</c> in the test suite.</li>
 %%% </ul>
 
 %%% @type var_name() = atom(). A variable name which is specified when
-%%% <code>ct:require/2</code> is called,
-%%% e.g. <code>ct:require(mynodename,{node,[telnet]})</code>
+%%% <c>ct:require/2</c> is called,
+%%% e.g. <c>ct:require(mynodename,{node,[telnet]})</c>
 %%%
 %%% @type target_name() = var_name(). The name of a target.
 %%%
@@ -99,10 +99,10 @@
 %%% <p>Run this function once before first test.</p>
 %%%
 %%% <p>Example:<br/>
-%%% <code>install([{config,["config_node.ctc","config_user.ctc"]}])</code>.</p>
+%%% <c>install([{config,["config_node.ctc","config_user.ctc"]}])</c>.</p>
 %%%
 %%% <p>Note that this function is automatically run by the
-%%% <code>ct_run</code> program.</p>
+%%% <c>ct_run</c> program.</p>
 install(Opts) ->
     ct_run:install(Opts).
 
@@ -115,10 +115,10 @@ install(Opts) ->
 %%%
 %%% @doc Run the given test case(s).
 %%%
-%%% <p>Requires that <code>ct:install/1</code> has been run first.</p>
+%%% <p>Requires that <c>ct:install/1</c> has been run first.</p>
 %%%
 %%% <p>Suites (*_SUITE.erl) files must be stored in
-%%% <code>TestDir</code> or <code>TestDir/test</code>.  All suites
+%%% <c>TestDir</c> or <c>TestDir/test</c>.  All suites
 %%% will be compiled when test is run.</p>
 run(TestDir,Suite,Cases) ->
     ct_run:run(TestDir,Suite,Cases).
@@ -201,25 +201,32 @@ run(TestDirs) ->
 %%%   AutoSkipped = integer()
 %%%   TestRunnerPid = pid()
 %%%   Reason = term()
-%%% @doc <p>Run tests as specified by the combination of options in <code>Opts</code>.
+%%% @doc <p>Run tests as specified by the combination of options in <c>Opts</c>.
 %%% The options are the same as those used with the
-%%% <seealso marker="ct_run#ct_run"><code>ct_run</code></seealso> program.
-%%% Note that here a <code>TestDir</code> can be used to point out the path to 
-%%% a <code>Suite</code>. Note also that the option <code>testcase</code>
-%%% corresponds to the <code>-case</code> option in the <code>ct_run</code> 
-%%% program. Configuration files specified in <code>Opts</code> will be
+%%% <seealso marker="ct_run#ct_run"><c>ct_run</c></seealso> program.
+%%% Note that here a <c>TestDir</c> can be used to point out the path to 
+%%% a <c>Suite</c>. Note also that the option <c>testcase</c>
+%%% corresponds to the <c>-case</c> option in the <c>ct_run</c> 
+%%% program. Configuration files specified in <c>Opts</c> will be
 %%% installed automatically at startup.</p>
-%%% <p><code>TestRunnerPid</code> is returned if <code>release_shell == true</code>
-%%% (see the User's Guide for details).</p>
-%%% <p><code>Reason</code> indicates what type of error has been encountered.</p>
+%%% <p><c>TestRunnerPid</c> is returned if <c>release_shell == true</c>
+%%% (see <c>break/1</c> for details).</p>
+%%% <p><c>Reason</c> indicates what type of error has been encountered.</p>
 run_test(Opts) ->
     ct_run:run_test(Opts).
 
 %%%-----------------------------------------------------------------
 %%% @spec run_testspec(TestSpec) -> Result
 %%%   TestSpec = [term()]
-%%% @doc Run test specified by <code>TestSpec</code>. The terms are
+%%%   Result = {Ok,Failed,{UserSkipped,AutoSkipped}} | {error,Reason}
+%%%   Ok = integer()
+%%%   Failed = integer()
+%%%   UserSkipped = integer()
+%%%   AutoSkipped = integer()
+%%%   Reason = term()
+%%% @doc Run test specified by <c>TestSpec</c>. The terms are
 %%% the same as those used in test specification files.
+%%% <p><c>Reason</c> indicates what type of error has been encountered.</p>
 run_testspec(TestSpec) ->
     ct_run:run_testspec(TestSpec).
     
@@ -239,8 +246,8 @@ step(TestDir,Suite,Case) ->
 %%%   Opt = config | keep_inactive
 %%%
 %%% @doc Step through a test case with the debugger. If the
-%%% <code>config</code> option has been given, breakpoints will
-%%% be set also on the configuration functions in <code>Suite</code>.
+%%% <c>config</c> option has been given, breakpoints will
+%%% be set also on the configuration functions in <c>Suite</c>.
 %%% @see run/3
 step(TestDir,Suite,Case,Opts) ->
     ct_run:step(TestDir,Suite,Case,Opts).
@@ -252,20 +259,20 @@ step(TestDir,Suite,Case,Opts) ->
 %%%
 %%% <p>From this mode all test case support functions can be executed
 %%% directly from the erlang shell. The interactive mode can also be
-%%% started from the OS command line with <code>ct_run -shell
-%%% [-config File...]</code>.</p>
+%%% started from the OS command line with <c>ct_run -shell
+%%% [-config File...]</c>.</p>
 %%%
 %%% <p>If any functions using "required config data" (e.g. telnet or
 %%% ftp functions) are to be called from the erlang shell, config data
-%%% must first be required with <code>ct:require/2</code>.</p>
+%%% must first be required with <c>ct:require/2</c>.</p>
 %%%
 %%% <p>Example:<br/>
-%%% <code>&gt; ct:require(unix_telnet, unix).</code><br/>
-%%% <code>ok</code><br/>
-%%% <code>&gt; ct_telnet:open(unix_telnet).</code><br/>
-%%% <code>{ok,&lt;0.105.0&gt;}</code><br/>
-%%% <code>&gt; ct_telnet:cmd(unix_telnet, "ls .").</code><br/>
-%%% <code>{ok,["ls","file1  ...",...]}</code></p>
+%%% <c>&gt; ct:require(unix_telnet, unix).</c><br/>
+%%% <c>ok</c><br/>
+%%% <c>&gt; ct_telnet:open(unix_telnet).</c><br/>
+%%% <c>{ok,&lt;0.105.0&gt;}</c><br/>
+%%% <c>&gt; ct_telnet:cmd(unix_telnet, "ls .").</c><br/>
+%%% <c>{ok,["ls","file1  ...",...]}</c></p>
 start_interactive() ->
     ct_util:start(interactive).
 
@@ -292,21 +299,21 @@ stop_interactive() ->
 %%% to specify arbitrarily deep tuples as <c>Required</c>. Note that it is
 %%% only the last element of the tuple which can be a list of <c>SubKey</c>s.
 %%%
-%%% <p>Example 1: require the variable <code>myvar</code>:</p>
+%%% <p>Example 1: require the variable <c>myvar</c>:</p>
 %%% <pre>ok = ct:require(myvar).</pre>
 %%%
 %%% <p>In this case the config file must at least contain:</p>
 %%% <pre>{myvar,Value}.</pre>
 %%% 
-%%% <p>Example 2: require the key <code>myvar</code> with
-%%% subkeys <code>sub1</code> and <code>sub2</code>:</p>
+%%% <p>Example 2: require the key <c>myvar</c> with
+%%% subkeys <c>sub1</c> and <c>sub2</c>:</p>
 %%% <pre>ok = ct:require({myvar,[sub1,sub2]}).</pre>
 %%%
 %%% <p>In this case the config file must at least contain:</p>
 %%% <pre>{myvar,[{sub1,Value},{sub2,Value}]}.</pre>
 %%%
-%%% <p>Example 3: require the key <code>myvar</code> with
-%%% subkey <code>sub1</code> with <code>subsub1</code>:</p>
+%%% <p>Example 3: require the key <c>myvar</c> with
+%%% subkey <c>sub1</c> with <c>subsub1</c>:</p>
 %%% <pre>ok = ct:require({myvar,sub1,sub2}).</pre>
 %%%
 %%% <p>In this case the config file must at least contain:</p>
@@ -332,12 +339,12 @@ require(Required) ->
 %%% of <c>SubKey</c>s.
 %%%
 %%% <p>If the requested data is available, the sub entry will be
-%%% associated with <code>Name</code> so that the value of the element
-%%% can be read with <code>get_config/1,2</code> provided
-%%% <code>Name</code> instead of the whole <code>Required</code> term.</p>
+%%% associated with <c>Name</c> so that the value of the element
+%%% can be read with <c>get_config/1,2</c> provided
+%%% <c>Name</c> instead of the whole <c>Required</c> term.</p>
 %%%
 %%% <p>Example: Require one node with a telnet connection and an
-%%% ftp connection. Name the node <code>a</code>:
+%%% ftp connection. Name the node <c>a</c>:
 %%% <pre>ok = ct:require(a,{machine,node}).</pre>
 %%% All references to this node may then use the node name.
 %%% E.g. you can fetch a file over ftp like this:</p>
@@ -386,7 +393,7 @@ get_config(Required,Default) ->
 %%%
 %%% <p>This function returns the matching value(s) or config element(s),
 %%% given a config variable key or its associated name
-%%% (if one has been specified with <code>require/2</code> or a 
+%%% (if one has been specified with <c>require/2</c> or a 
 %%% require statement).</p>
 %%%
 %%% <p>Example, given the following config file:</p>
@@ -394,33 +401,33 @@ get_config(Required,Default) ->
 %%% {unix,[{telnet,IpAddr},
 %%%        {user,[{username,Username},
 %%%               {password,Password}]}]}.</pre>
-%%% <p><code>ct:get_config(unix,Default) ->
+%%% <p><c>ct:get_config(unix,Default) ->
 %%%                          [{telnet,IpAddr},
 %%%                           {user, [{username,Username},
-%%%                                   {password,Password}]}]</code><br/>
-%%% <code>ct:get_config({unix,telnet},Default) -> IpAddr</code><br/>
-%%% <code>ct:get_config({unix,user,username},Default) -> Username</code><br/>
-%%% <code>ct:get_config({unix,ftp},Default) -> Default</code><br/>
-%%% <code>ct:get_config(unknownkey,Default) -> Default</code></p>
+%%%                                   {password,Password}]}]</c><br/>
+%%% <c>ct:get_config({unix,telnet},Default) -> IpAddr</c><br/>
+%%% <c>ct:get_config({unix,user,username},Default) -> Username</c><br/>
+%%% <c>ct:get_config({unix,ftp},Default) -> Default</c><br/>
+%%% <c>ct:get_config(unknownkey,Default) -> Default</c></p>
 %%%
 %%% <p>If a config variable key has been associated with a name (by
-%%% means of <code>require/2</code> or a require statement), the name 
+%%% means of <c>require/2</c> or a require statement), the name 
 %%% may be used instead of the key to read the value:</p>
 %%%
-%%% <p><code>ct:require(myuser,{unix,user}) -> ok.</code><br/>
-%%% <code>ct:get_config(myuser,Default) ->
+%%% <p><c>ct:require(myuser,{unix,user}) -> ok.</c><br/>
+%%% <c>ct:get_config(myuser,Default) ->
 %%%          [{username,Username},
-%%%           {password,Password}]</code></p>
+%%%           {password,Password}]</c></p>
 %%%
 %%% <p>If a config variable is defined in multiple files and you want to
-%%% access all possible values, use the <code>all</code> option. The
+%%% access all possible values, use the <c>all</c> option. The
 %%% values will be returned in a list and the order of the elements
 %%% corresponds to the order that the config files were specified at 
 %%% startup.</p>
 %%%
 %%% <p>If you want config elements (key-value tuples) returned as result 
-%%% instead of values, use the <code>element</code> option. 
-%%% The returned elements will then be on the form <code>{Required,Value}</code></p>
+%%% instead of values, use the <c>element</c> option. 
+%%% The returned elements will then be on the form <c>{Required,Value}</c></p>
 %%%
 %%% @see get_config/1
 %%% @see get_config/2
@@ -493,11 +500,11 @@ log(X1,X2,X3) ->
 %%% <p>This function is meant for printing a string directly from a
 %%% test case to the test case log file.</p>
 %%%
-%%% <p>Default <code>Category</code> is <code>default</code>,
-%%% default <code>Importance</code> is <code>?STD_IMPORTANCE</code>,
-%%% and default value for <code>Args</code> is <code>[]</code>.</p>
-%%% <p>Please see the User's Guide for details on <code>Category</code>
-%%% and <code>Importance</code>.</p>
+%%% <p>Default <c>Category</c> is <c>default</c>,
+%%% default <c>Importance</c> is <c>?STD_IMPORTANCE</c>,
+%%% and default value for <c>Args</c> is <c>[]</c>.</p>
+%%% <p>Please see the User's Guide for details on <c>Category</c>
+%%% and <c>Importance</c>.</p>
 log(Category,Importance,Format,Args) ->
     ct_logs:tc_log(Category,Importance,Format,Args).
 
@@ -547,11 +554,11 @@ print(X1,X2,X3) ->
 %%% <p>This function is meant for printing a string from a test case
 %%% to the console.</p>
 %%%
-%%% <p>Default <code>Category</code> is <code>default</code>,
-%%% default <code>Importance</code> is <code>?STD_IMPORTANCE</code>,
-%%% and default value for <code>Args</code> is <code>[]</code>.</p>
-%%% <p>Please see the User's Guide for details on <code>Category</code>
-%%% and <code>Importance</code>.</p>
+%%% <p>Default <c>Category</c> is <c>default</c>,
+%%% default <c>Importance</c> is <c>?STD_IMPORTANCE</c>,
+%%% and default value for <c>Args</c> is <c>[]</c>.</p>
+%%% <p>Please see the User's Guide for details on <c>Category</c>
+%%% and <c>Importance</c>.</p>
 print(Category,Importance,Format,Args) ->
     ct_logs:tc_print(Category,Importance,Format,Args).
 
@@ -601,11 +608,11 @@ pal(X1,X2,X3) ->
 %%% <p>This function is meant for printing a string from a test case,
 %%% both to the test case log file and to the console.</p>
 %%%
-%%% <p>Default <code>Category</code> is <code>default</code>,
-%%% default <code>Importance</code> is <code>?STD_IMPORTANCE</code>,
-%%% and default value for <code>Args</code> is <code>[]</code>.</p>
-%%% <p>Please see the User's Guide for details on <code>Category</code>
-%%% and <code>Importance</code>.</p>
+%%% <p>Default <c>Category</c> is <c>default</c>,
+%%% default <c>Importance</c> is <c>?STD_IMPORTANCE</c>,
+%%% and default value for <c>Args</c> is <c>[]</c>.</p>
+%%% <p>Please see the User's Guide for details on <c>Category</c>
+%%% and <c>Importance</c>.</p>
 pal(Category,Importance,Format,Args) ->
     ct_logs:tc_pal(Category,Importance,Format,Args).
 
@@ -624,7 +631,7 @@ capture_start() ->
 %%% @spec capture_stop() -> ok
 %%%
 %%% @doc Stop capturing text strings (a session started with
-%%% <code>capture_start/0</code>).
+%%% <c>capture_start/0</c>).
 %%%
 %%% @see capture_start/0
 %%% @see capture_get/1
@@ -647,9 +654,9 @@ capture_get() ->
 %%%
 %%% @doc Return and purge the list of text strings buffered
 %%% during the latest session of capturing printouts to stdout.
-%%% With <code>ExclCategories</code> it's possible to specify
-%%% log categories that should be ignored in <code>ListOfStrings</code>.
-%%% If <code>ExclCategories = []</code>, no filtering takes place.
+%%% With <c>ExclCategories</c> it's possible to specify
+%%% log categories that should be ignored in <c>ListOfStrings</c>.
+%%% If <c>ExclCategories = []</c>, no filtering takes place.
 %%%
 %%% @see capture_start/0
 %%% @see capture_stop/0
@@ -674,7 +681,7 @@ capture_get([]) ->
 %%%      Reason = term()
 %%%
 %%% @doc Terminate a test case with the given error
-%%% <code>Reason</code>.
+%%% <c>Reason</c>.
 fail(Reason) ->
     try
 	exit({test_case_failed,Reason})
@@ -694,7 +701,7 @@ fail(Reason) ->
 %%%
 %%% @doc Terminate a test case with an error message specified
 %%% by a format string and a list of values (used as arguments to
-%%% <code>io_lib:format/2</code>).
+%%% <c>io_lib:format/2</c>).
 fail(Format, Args) ->
     try io_lib:format(Format, Args) of
 	Str ->
@@ -717,11 +724,11 @@ fail(Format, Args) ->
 %%% @spec comment(Comment) -> void()
 %%%      Comment = term()
 %%%
-%%% @doc Print the given <code>Comment</code> in the comment field in
+%%% @doc Print the given <c>Comment</c> in the comment field in
 %%% the table on the test suite result page.
 %%%
 %%% <p>If called several times, only the last comment is printed.
-%%% The test case return value <code>{comment,Comment}</code>
+%%% The test case return value <c>{comment,Comment}</c>
 %%% overwrites the string set by this function.</p>
 comment(Comment) when is_list(Comment) ->
     Formatted =
@@ -744,10 +751,10 @@ comment(Comment) ->
 %%% @doc Print the formatted string in the comment field in
 %%% the table on the test suite result page.
 %%% 
-%%% <p>The <code>Format</code> and <code>Args</code> arguments are
-%%% used in call to <code>io_lib:format/2</code> in order to create
-%%% the comment string. The behaviour of <code>comment/2</code> is
-%%% otherwise the same as the <code>comment/1</code> function (see
+%%% <p>The <c>Format</c> and <c>Args</c> arguments are
+%%% used in call to <c>io_lib:format/2</c> in order to create
+%%% the comment string. The behaviour of <c>comment/2</c> is
+%%% otherwise the same as the <c>comment/1</c> function (see
 %%% above for details).</p>
 comment(Format, Args) when is_list(Format), is_list(Args) ->
     Formatted =
@@ -792,11 +799,11 @@ get_target_name(Handle) ->
 %%% @doc Parse the printout from an SQL table and return a list of tuples.
 %%%
 %%% <p>The printout to parse would typically be the result of a
-%%% <code>select</code> command in SQL. The returned
-%%% <code>Table</code> is a list of tuples, where each tuple is a row
+%%% <c>select</c> command in SQL. The returned
+%%% <c>Table</c> is a list of tuples, where each tuple is a row
 %%% in the table.</p>
 %%% 
-%%% <p><code>Heading</code> is a tuple of strings representing the
+%%% <p><c>Heading</c> is a tuple of strings representing the
 %%% headings of each column in the table.</p>
 parse_table(Data) ->
     ct_util:parse_table(Data).
@@ -868,8 +875,8 @@ make_and_load(Dir, Suite) ->
 %%%       SuiteUserData = [term()]
 %%%       Reason = term()
 %%%
-%%% @doc Returns any data specified with the tag <code>userdata</code> 
-%%% in the list of tuples returned from <code>Suite:suite/0</code>.
+%%% @doc Returns any data specified with the tag <c>userdata</c> 
+%%% in the list of tuples returned from <c>Suite:suite/0</c>.
 userdata(TestDir, Suite) ->
     case make_and_load(TestDir, Suite) of
 	E = {error,_} ->
@@ -904,9 +911,9 @@ get_userdata(_BadTerm, Spec) ->
 %%%       TCUserData = [term()]
 %%%       Reason = term()
 %%%
-%%% @doc Returns any data specified with the tag <code>userdata</code>
-%%% in the list of tuples returned from <code>Suite:group(GroupName)</code>
-%%% or <code>Suite:Case()</code>.
+%%% @doc Returns any data specified with the tag <c>userdata</c>
+%%% in the list of tuples returned from <c>Suite:group(GroupName)</c>
+%%% or <c>Suite:Case()</c>.
 userdata(TestDir, Suite, {group,GroupName}) ->
     case make_and_load(TestDir, Suite) of
 	E = {error,_} ->
@@ -986,7 +993,7 @@ get_testdata(Key) ->
 %%%	 executing. The function is therefore only safe to call from a function which
 %%%	 has been called (or synchronously invoked) by the test case.</p>
 %%%
-%%%      <p><code>Reason</code>, the reason for aborting the test case, is printed
+%%%      <p><c>Reason</c>, the reason for aborting the test case, is printed
 %%%      in the test case log.</p>
 abort_current_testcase(Reason) ->
     test_server_ctrl:abort_current_testcase(Reason).
@@ -999,13 +1006,13 @@ abort_current_testcase(Reason) ->
 %%%       Reason = term()
 %%%
 %%% @doc <p>This function encrypts the source config file with DES3 and 
-%%%      saves the result in file <code>EncryptFileName</code>. The key,
+%%%      saves the result in file <c>EncryptFileName</c>. The key,
 %%%      a string, must be available in a text file named 
-%%%      <code>.ct_config.crypt</code> in the current directory, or the 
+%%%      <c>.ct_config.crypt</c> in the current directory, or the 
 %%%      home directory of the user (it is searched for in that order).</p>
 %%%      <p>See the Common Test User's Guide for information about using
 %%%      encrypted config files when running tests.</p>
-%%%      <p>See the <code>crypto</code> application for details on DES3
+%%%      <p>See the <c>crypto</c> application for details on DES3
 %%%      encryption/decryption.</p>
 encrypt_config_file(SrcFileName, EncryptFileName) ->
     ct_config:encrypt_config_file(SrcFileName, EncryptFileName).
@@ -1019,13 +1026,13 @@ encrypt_config_file(SrcFileName, EncryptFileName) ->
 %%%       Reason = term()
 %%%
 %%% @doc <p>This function encrypts the source config file with DES3 and
-%%%      saves the result in the target file <code>EncryptFileName</code>. 
+%%%      saves the result in the target file <c>EncryptFileName</c>. 
 %%%      The encryption key to use is either the value in 
-%%%      <code>{key,Key}</code> or the value stored in the file specified 
-%%%      by <code>{file,File}</code>.</p>
+%%%      <c>{key,Key}</c> or the value stored in the file specified 
+%%%      by <c>{file,File}</c>.</p>
 %%%      <p>See the Common Test User's Guide for information about using
 %%%      encrypted config files when running tests.</p>
-%%%      <p>See the <code>crypto</code> application for details on DES3
+%%%      <p>See the <c>crypto</c> application for details on DES3
 %%%      encryption/decryption.</p>
 encrypt_config_file(SrcFileName, EncryptFileName, KeyOrFile) ->
     ct_config:encrypt_config_file(SrcFileName, EncryptFileName, KeyOrFile).
@@ -1037,11 +1044,11 @@ encrypt_config_file(SrcFileName, EncryptFileName, KeyOrFile) ->
 %%%       TargetFileName = string()
 %%%       Reason = term()
 %%%
-%%% @doc <p>This function decrypts <code>EncryptFileName</code>, previously 
-%%%      generated with <code>encrypt_config_file/2/3</code>. The original
+%%% @doc <p>This function decrypts <c>EncryptFileName</c>, previously 
+%%%      generated with <c>encrypt_config_file/2/3</c>. The original
 %%%      file contents is saved in the target file. The encryption key, a
 %%%      string, must be available in a text file named
-%%%      <code>.ct_config.crypt</code> in the current directory, or the
+%%%      <c>.ct_config.crypt</c> in the current directory, or the
 %%%      home directory of the user (it is searched for in that order).</p>
 decrypt_config_file(EncryptFileName, TargetFileName) ->
     ct_config:decrypt_config_file(EncryptFileName, TargetFileName).
@@ -1054,8 +1061,8 @@ decrypt_config_file(EncryptFileName, TargetFileName) ->
 %%%       KeyOrFile = {key,string()} | {file,string()}
 %%%       Reason = term()
 %%%
-%%% @doc <p>This function decrypts <code>EncryptFileName</code>, previously 
-%%%      generated with <code>encrypt_config_file/2/3</code>. The original
+%%% @doc <p>This function decrypts <c>EncryptFileName</c>, previously 
+%%%      generated with <c>encrypt_config_file/2/3</c>. The original
 %%%      file contents is saved in the target file. The key must have the
 %%%      the same value as that used for encryption.</p>
 decrypt_config_file(EncryptFileName, TargetFileName, KeyOrFile) ->
@@ -1072,7 +1079,7 @@ decrypt_config_file(EncryptFileName, TargetFileName, KeyOrFile) ->
 %%% 	 given callback module and configuration string. Callback module
 %%%	 should be either loaded or present in the code part. Loaded
 %%%	 configuration variables can later be removed using
-%%%	 <code>remove_config/2</code> function.</p>
+%%%	 <c>remove_config/2</c> function.</p>
 add_config(Callback, Config)->
     ct_config:add_config(Callback, Config).
 
@@ -1101,9 +1108,9 @@ remove_config(Callback, Config) ->
 %%%       A = list()
 %%%
 %%% @doc <p>Use this function to set a new timetrap for the running test case.
-%%%      If the argument is <code>Func</code>, the timetrap will be triggered
-%%%      when this function returns. <code>Func</code> may also return a new
-%%%      <code>Time</code> value, which in that case will be the value for the
+%%%      If the argument is <c>Func</c>, the timetrap will be triggered
+%%%      when this function returns. <c>Func</c> may also return a new
+%%%      <c>Time</c> value, which in that case will be the value for the
 %%%      new timetrap.</p>
 timetrap(Time) ->
     test_server:timetrap_cancel(),
@@ -1174,13 +1181,21 @@ sync_notify(Name,Data) ->
 %%%                'enable break with release_shell option'
 %%%       TestCases = [atom()]
 %%%
-%%% @doc <p>This function will cancel all timetraps and pause the
+%%% @doc <p>This function will cancel any active timetrap and pause the
 %%%       execution of the current test case until the user calls the
 %%%       <c>continue/0</c> function. It gives the user the opportunity
 %%%       to interact with the erlang node running the tests, e.g. for
 %%%       debugging purposes or for manually executing a part of the
 %%%       test case. If a parallel group is executing, <c>break/2</c>
 %%%       should be called instead.</p>
+%%%      <p>A cancelled timetrap will not be automatically
+%%%       reactivated after the break, but must be started exlicitly with
+%%%       <c>ct:timetrap/1</c></p>
+%%%      <p>In order for the break/continue functionality to work,
+%%%       Common Test must release the shell process controlling stdin.
+%%%       This is done by setting the <c>release_shell</c> start option
+%%%       to <c>true</c>. See the User's Guide for more information.</p>
+
 break(Comment) ->
     case {ct_util:get_testdata(starter),
 	  ct_util:get_testdata(release_shell)} of
@@ -1191,7 +1206,7 @@ break(Comment) ->
 	    {error,'enable break with release_shell option'};
 	_ ->
 	    case get_testdata(curr_tc) of
-		{ok,{_,TestCase}} ->
+		{ok,{_,_TestCase}} ->
 		    test_server:break(?MODULE, Comment);
 		{ok,Cases} when is_list(Cases) ->
 		    {error,{'multiple cases running',
@@ -1215,6 +1230,7 @@ break(Comment) ->
 %%%       pause a test case executing in a parallel group. The
 %%%       <c>continue/1</c> function should be used to resume
 %%%       execution of <c>TestCase</c>.</p>
+%%%      <p>See <c>break/1</c> for more details.</p>
 break(TestCase, Comment) ->
     case {ct_util:get_testdata(starter),
 	  ct_util:get_testdata(release_shell)} of
diff --git a/lib/test_server/doc/src/test_server_ctrl.xml b/lib/test_server/doc/src/test_server_ctrl.xml
index 9028a67ecb..6b33591701 100644
--- a/lib/test_server/doc/src/test_server_ctrl.xml
+++ b/lib/test_server/doc/src/test_server_ctrl.xml
@@ -769,11 +769,13 @@ Optional, if not given the test server controller node
         constantly updated. The following can be reported:
         </p>
         <p><c>What = tests_start, Data = {Name,NumCases}</c><br></br>
+	   <c>What = loginfo, Data = [{topdir,TestRootDir},{rundir,CurrLogDir}]</c><br></br>
 	   <c>What = tests_done, Data = {Ok,Failed,{UserSkipped,AutoSkipped}}</c><br></br>
-	   <c>What = tc_start, Data = {Mod,Func}</c><br></br>
+	   <c>What = tc_start, Data = {{Mod,Func},TCLogFile}</c><br></br>
 	   <c>What = tc_done, Data = {Mod,Func,Result}</c><br></br>
 	   <c>What = tc_user_skip, Data = {Mod,Func,Comment}</c><br></br>
-	   <c>What = tc_auto_skip, Data = {Mod,Func,Comment}</c></p>
+	   <c>What = tc_auto_skip, Data = {Mod,Func,Comment}</c><br></br>
+	   <c>What = framework_error, Data = {{FWMod,FWFunc},Error}</c></p>
       </desc>
     </func>
     <func>