diff options
| author | Lukas Larsson <[email protected]> | 2015-07-02 11:13:32 +0200 |
|---|---|---|
| committer | Lukas Larsson <[email protected]> | 2015-07-10 14:15:37 +0200 |
| commit | c431a065ba515d27830f01c852f70940efb3003b (patch) | |
| tree | 3fffccb470dc6cfa81bc397f4f35d5b5eb226d17 | |
| parent | db2e9773f95a79b40e197031c7b8782392fa9d02 (diff) | |
| download | otp-c431a065ba515d27830f01c852f70940efb3003b.tar.gz otp-c431a065ba515d27830f01c852f70940efb3003b.tar.bz2 otp-c431a065ba515d27830f01c852f70940efb3003b.zip | |
ose: Remove all code related to the OSE port
The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.
115 files changed, 1291 insertions, 14910 deletions
diff --git a/HOWTO/INSTALL-CROSS.md b/HOWTO/INSTALL-CROSS.md index 224f238fd0..0c984a825d 100644 --- a/HOWTO/INSTALL-CROSS.md +++ b/HOWTO/INSTALL-CROSS.md @@ -520,29 +520,6 @@ When a variable has been set, no warning will be issued. `posix_memalign` implementation that accepts larger than page size alignment. -* `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1) - -* `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2) - -* `erl_xcomp_ose_OSEROOT` - OSE installation root directory - -* `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution - -* `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool - -* `erl_xcomp_ose_LM_SET_CONF` - Sets the configuration for an OSE load module - -* `erl_xcomp_ose_LM_ELF_SIZE` - Prints the section size information for an - OSE load module - -* `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file - -* `erl_xcomp_ose_BEAM_LM_CONF` - Beam OSE load module configuration file - -* `erl_xcomp_ose_EPMD_LM_CONF` - EPMD OSE load module configuration file - -* `erl_xcomp_ose_RUN_ERL_LM_CONF` - run_erl_lm OSE load module configuration file - Copyright and License --------------------- diff --git a/erts/aclocal.m4 b/erts/aclocal.m4 index 01541aff72..fc2078025e 100644 --- a/erts/aclocal.m4 +++ b/erts/aclocal.m4 @@ -74,21 +74,6 @@ AC_ARG_VAR(erl_xcomp_clock_gettime_cpu_time, [clock_gettime() can be used for re AC_ARG_VAR(erl_xcomp_after_morecore_hook, [__after_morecore_hook can track malloc()s core memory usage: yes|no (only used when cross compiling)]) AC_ARG_VAR(erl_xcomp_dlsym_brk_wrappers, [dlsym(RTLD_NEXT, _) brk wrappers can track malloc()s core memory usage: yes|no (only used when cross compiling)]) -dnl Cross compilation variables for OSE -AC_ARG_VAR(erl_xcomp_ose_ldflags_pass1, [Linker flags for the OSE module (pass 1) (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_ldflags_pass2, [Linker flags for the OSE module (pass 2) (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_OSEROOT, [OSE installation root directory (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_STRIP, [Strip utility shipped with the OSE distribution(only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_LM_POST_LINK, [OSE postlink tool (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_LM_SET_CONF, [Sets the configuration for an OSE load module (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_LM_ELF_SIZE, [Prints the section size information for an OSE load module (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_LM_LCF, [OSE load module linker configuration file (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_BEAM_LM_CONF, [BEAM OSE load module default configuration file (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_EPMD_LM_CONF, [EPMD OSE load module default configuration file (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_RUN_ERL_LM_CONF, [run_erl_lm OSE load module default configuration file (only used when cross compiling for OSE)]) -AC_ARG_VAR(erl_xcomp_ose_CONFD, [OSE confd source file]) -AC_ARG_VAR(erl_xcomp_ose_CRT0_LM, [OSE crt0 lm source file]) - ]) AC_DEFUN(ERL_XCOMP_SYSROOT_INIT, @@ -503,8 +488,6 @@ AC_CACHE_VAL(ac_cv_sys_ipv6_support, #ifdef __WIN32__ #include <winsock2.h> #include <ws2tcpip.h> -#elif __OSE__ -#error "no ipv6" #else #include <netinet/in.h> #endif], @@ -517,8 +500,6 @@ else #ifdef __WIN32__ #include <winsock2.h> #include <ws2tcpip.h> -#elif __OSE__ -#error "no ipv6" #else #include <netinet/in.h> #endif], @@ -985,12 +966,6 @@ if test "X$host_os" = "Xwin32"; then THR_LIBS= THR_LIB_NAME=win32_threads THR_LIB_TYPE=win32_threads -elif test "X$host_os" = "Xose"; then - AC_MSG_RESULT(yes) - THR_DEFS="-DOSE_THREADS" - THR_LIBS= - THR_LIB_NAME=ose_threads - THR_LIB_TYPE=ose_threads else AC_MSG_RESULT(no) THR_DEFS= @@ -1577,22 +1552,9 @@ case "$THR_LIB_NAME" in fi ;; - pthread|ose_threads) - case "$THR_LIB_NAME" in - pthread) - ETHR_THR_LIB_BASE_DIR=pthread - AC_DEFINE(ETHR_PTHREADS, 1, [Define if you have pthreads]) - ;; - ose_threads) - AC_DEFINE(ETHR_OSE_THREADS, 1, - [Define if you have OSE style threads]) - ETHR_THR_LIB_BASE_DIR=ose - AC_CHECK_HEADER(ose_spi/ose_spi.h, - AC_DEFINE(HAVE_OSE_SPI_H, 1, - [Define if you have the "ose_spi/ose_spi.h" header file.])) - ;; - esac - if test "x$THR_LIB_NAME" = "xpthread"; then + pthread) + ETHR_THR_LIB_BASE_DIR=pthread + AC_DEFINE(ETHR_PTHREADS, 1, [Define if you have pthreads]) case $host_os in openbsd*) # The default stack size is insufficient for our needs @@ -1651,7 +1613,6 @@ case "$THR_LIB_NAME" in *) ;; esac - fi dnl We sometimes need ETHR_DEFS in order to find certain headers dnl (at least for pthread.h on osf1). saved_cppflags="$CPPFLAGS" @@ -1696,7 +1657,6 @@ case "$THR_LIB_NAME" in dnl dnl Check for functions dnl - if test "x$THR_LIB_NAME" = "xpthread"; then AC_CHECK_FUNC(pthread_spin_lock, \ [ethr_have_native_spinlock=yes \ AC_DEFINE(ETHR_HAVE_PTHREAD_SPIN_LOCK, 1, \ @@ -1916,8 +1876,6 @@ case "$THR_LIB_NAME" in esac CFLAGS=$old_CFLAGS - fi ## test "x$THR_LIB_NAME" = "xpthread" - if test "X$disable_native_ethr_impls" = "Xyes"; then ethr_have_native_atomics=no else diff --git a/erts/configure.in b/erts/configure.in index 293ff825f8..6950915a6a 100644 --- a/erts/configure.in +++ b/erts/configure.in @@ -897,10 +897,7 @@ dnl what the user say. This might not be the right way to do it, but dnl for now that is the way we do it. USER_LD=$LD USER_LDFLAGS="$LDFLAGS" -case $host in - *ose) ;; - *) LD='$(CC)' ;; -esac +LD='$(CC)' AC_SUBST(LD) LDFLAG_RUNTIME_LIBRARY_PATH="$CFLAG_RUNTIME_LIBRARY_PATH" @@ -915,8 +912,6 @@ dnl This is the os flavour, should be unix, ose, vxworks or win32 case $host in win32) ERLANG_OSTYPE=win32 ;; - *ose) - ERLANG_OSTYPE=ose ;; *) ERLANG_OSTYPE=unix ;; esac @@ -1225,7 +1220,7 @@ case "$enable_threads"-"$found_threads" in AC_MSG_RESULT(yes; enabled by user) ;; unknown-yes) case $host_os in - solaris*|linux*|darwin*|win32|ose) + solaris*|linux*|darwin*|win32) emu_threads=yes AC_MSG_RESULT(yes; default on this platform) ;; @@ -1307,7 +1302,7 @@ else enable_child_waiter_thread=no fi ;; - win32|ose) + win32) # Child waiter thread cannot be enabled disable_child_waiter_thread=yes enable_child_waiter_thread=no @@ -2071,7 +2066,7 @@ AC_CHECK_FUNCS([getipnodebyname getipnodebyaddr gethostbyname2]) AC_CHECK_FUNCS([ieee_handler fpsetmask finite isnan isinf res_gethostbyname dlopen \ pread pwrite memmove strerror strerror_r strncasecmp \ gethrtime localtime_r gmtime_r inet_pton \ - memcpy mallopt sbrk _sbrk __sbrk brk _brk __brk \ + mmap mremap memcpy mallopt sbrk _sbrk __sbrk brk _brk __brk \ flockfile fstat strlcpy strlcat setsid posix2time time2posix \ setlocale nl_langinfo poll mlockall ppoll]) @@ -2123,17 +2118,6 @@ case $host_os in AC_CHECK_FUNCS([writev]) ;; esac -case $host_os in - *ose) - AC_MSG_CHECKING([for mmap]) - AC_MSG_RESULT(not using for OSE) - AC_MSG_CHECKING([for mremap]) - AC_MSG_RESULT(not using for OSE) ;; - *) - AC_CHECK_FUNCS([mmap mremap]) ;; -esac - - AC_CHECK_DECLS([posix2time, time2posix],,,[#include <time.h>]) disable_vfork=false @@ -4887,7 +4871,6 @@ AC_OUTPUT( Makefile:Makefile.in ../make/$host/otp.mk:../make/otp.mk.in ../make/$host/otp_ded.mk:../make/otp_ded.mk.in - ../make/$host/ose_lm.mk:../make/ose_lm.mk.in dnl dnl The ones below should be moved to their respective lib dnl diff --git a/erts/doc/src/driver_entry.xml b/erts/doc/src/driver_entry.xml index 30772c68fe..32fc9e13a4 100644 --- a/erts/doc/src/driver_entry.xml +++ b/erts/doc/src/driver_entry.xml @@ -246,14 +246,10 @@ typedef struct erl_drv_entry { something that the <c>WaitForMultipleObjects</c> API function understands). (Some trickery in the emulator allows more than the built-in limit of 64 <c>Events</c> to be used.)</p> - <p>On Enea OSE the <c>event</c> is one or more signals that can - be retrieved using <seealso marker="ose:ose_erl_driver#erl_drv_ose_get_signal">erl_drv_ose_get_signal</seealso>.</p> <p>To use this with threads and asynchronous routines, create a - pipe on unix, an Event on Windows or a unique signal number on - Enea OSE. When the routine + pipe on unix and an Event on Windows. When the routine completes, write to the pipe (use <c>SetEvent</c> on - Windows or send a message to the emulator process on Enea OSE), - this will make the emulator call + Windows), this will make the emulator call <c>ready_input</c> or <c>ready_output</c>.</p> <p>Spurious events may happen. That is, calls to <c>ready_input</c> or <c>ready_output</c> even though no real events are signaled. In diff --git a/erts/doc/src/erl_driver.xml b/erts/doc/src/erl_driver.xml index 1f7fe0f961..3bf18ae8d0 100644 --- a/erts/doc/src/erl_driver.xml +++ b/erts/doc/src/erl_driver.xml @@ -1044,9 +1044,7 @@ typedef struct ErlIOVec { <c>select</c>/<c>poll</c> can use). On windows, the Win32 API function <c>WaitForMultipleObjects</c> is used. This places other restrictions on the event object. - Refer to the Win32 SDK documentation. - On Enea OSE, the receive function is used. See the <seealso - marker="ose:ose_erl_driver"></seealso> for more details.</p> + Refer to the Win32 SDK documentation.</p> <p>The <c>on</c> parameter should be <c>1</c> for setting events and <c>0</c> for clearing them.</p> <p>The <c>mode</c> argument is a bitwise-or combination of @@ -1058,7 +1056,7 @@ typedef struct ErlIOVec { <seealso marker="driver_entry#ready_output">ready_output</seealso>. </p> <note> - <p>Some OS (Windows and Enea OSE) do not differentiate between read and write events. + <p>Some OS (Windows) do not differentiate between read and write events. The call-back for a fired event then only depends on the value of <c>mode</c>.</p> </note> <p><c>ERL_DRV_USE</c> specifies if we are using the event object or if we want to close it. diff --git a/erts/doc/src/erlang.xml b/erts/doc/src/erlang.xml index 37f0aa289e..e77532463e 100644 --- a/erts/doc/src/erlang.xml +++ b/erts/doc/src/erlang.xml @@ -1054,7 +1054,7 @@ <fsummary>Print a term on standard output</fsummary> <desc> <p>Prints a text representation of <c><anno>Term</anno></c> on the standard - output. On OSE the term is printed to the ramlog.</p> + output.</p> <warning> <p>This BIF is intended for debugging only.</p> </warning> diff --git a/erts/doc/src/run_erl.xml b/erts/doc/src/run_erl.xml index 0a5b2c6136..faec3c68c1 100644 --- a/erts/doc/src/run_erl.xml +++ b/erts/doc/src/run_erl.xml @@ -59,7 +59,7 @@ first argument to run_erl on the command line.</item> <tag>pipe_dir</tag> <item>This is where to put the named pipe, usually - <c><![CDATA[/tmp/]]></c> on Unix or <c><![CDATA[/pipe/]]></c> on OSE. It shall be suffixed by a <c><![CDATA[/]]></c> (slash), + <c><![CDATA[/tmp/]]></c>. It shall be suffixed by a <c><![CDATA[/]]></c> (slash), i.e. not <c><![CDATA[/tmp/epipies]]></c>, but <c><![CDATA[/tmp/epipes/]]></c>. </item> <tag>log_dir</tag> <item>This is where the log files are written. There will be one diff --git a/erts/emulator/Makefile.in b/erts/emulator/Makefile.in index a919f0e3ac..c5080d5b5d 100644 --- a/erts/emulator/Makefile.in +++ b/erts/emulator/Makefile.in @@ -23,10 +23,6 @@ include ../vsn.mk include $(ERL_TOP)/make/$(TARGET)/otp.mk -include $(TARGET)/gen_git_version.mk -ifeq ($(findstring ose,$(TARGET)),ose) -include $(ERL_TOP)/make/$(TARGET)/ose_lm.mk -endif - ENABLE_ALLOC_TYPE_VARS = @ENABLE_ALLOC_TYPE_VARS@ HIPE_ENABLED=@HIPE_ENABLED@ DTRACE_ENABLED=@DTRACE_ENABLED@ @@ -245,9 +241,7 @@ HCC = @HCC@ LD = @LD@ DEXPORT = @DEXPORT@ RANLIB = @RANLIB@ -ifneq ($(findstring ose,$(TARGET)),ose) STRIP = strip -endif PERL = @PERL@ RM = @RM@ MKDIR = @MKDIR@ @@ -684,14 +678,6 @@ $(OBJDIR)/%.o: $(TTF_DIR)/%.c $(OBJDIR)/%.o: sys/$(ERLANG_OSTYPE)/%.c $(V_CC) $(CFLAGS) $(INCLUDES) -c $< -o $@ -ifeq ($(findstring ose,$(TARGET)),ose) -$(OBJDIR)/ose_confd.o: $(OSE_CONFD) - $(V_CC) $(CFLAGS) $(INCLUDES) -c $< -o $@ - -$(OBJDIR)/crt0_lm.o: $(CRT0_LM) - $(V_CC) $(CFLAGS) $(INCLUDES) -c $< -o $@ -endif - $(OBJDIR)/%.o: sys/common/%.c $(V_CC) $(subst -O2, $(GEN_OPT_FLGS), $(CFLAGS)) $(INCLUDES) -c $< -o $@ @@ -810,29 +796,6 @@ OS_OBJS = \ $(OBJDIR)/dosmap.o else -ifeq ($(findstring ose,$(TARGET)),ose) -OS_OBJS = \ - $(OBJDIR)/sys.o \ - $(OBJDIR)/driver_tab.o \ - $(OBJDIR)/ose_efile.o \ - $(OBJDIR)/gzio.o \ - $(OBJDIR)/elib_memmove.o - -OS_OBJS += $(OBJDIR)/ose_confd.o \ - $(OBJDIR)/crt0_lm.o - -OS_OBJS += $(OBJDIR)/sys_float.o \ - $(OBJDIR)/sys_time.o - -DRV_OBJS = \ - $(OBJDIR)/efile_drv.o \ - $(OBJDIR)/ose_signal_drv.o \ - $(OBJDIR)/inet_drv.o \ - $(OBJDIR)/zlib_drv.o \ - $(OBJDIR)/ram_file_drv.o \ - $(OBJDIR)/ttsl_drv.o - -else OS_OBJS = \ $(OBJDIR)/sys.o \ $(OBJDIR)/driver_tab.o \ @@ -849,7 +812,6 @@ DRV_OBJS = \ $(OBJDIR)/ram_file_drv.o \ $(OBJDIR)/ttsl_drv.o endif -endif ifneq ($(STATIC_NIFS),no) STATIC_NIF_LIBS = $(STATIC_NIFS) @@ -1022,19 +984,12 @@ $(BINDIR)/$(EMULATOR_EXECUTABLE): $(INIT_OBJS) $(OBJS) $(DEPLIBS) $(STATIC_DRIVER_LIBS) $(LIBS) else -ifeq ($(findstring ose,$(TARGET)),ose) -$(BINDIR)/$(EMULATOR_EXECUTABLE): $(INIT_OBJS) $(OBJS) $(DEPLIBS) $(LCF) - $(call build-ose-load-module, $@, $(INIT_OBJS) $(OBJS), $(STATIC_NIF_LIBS) \ - $(STATIC_DRIVER_LIBS) $(LIBS), $(BEAM_LMCONF)) - -else $(BINDIR)/$(EMULATOR_EXECUTABLE): $(INIT_OBJS) $(OBJS) $(DEPLIBS) $(ld_verbose)$(PURIFY) $(LD) -o $(BINDIR)/$(EMULATOR_EXECUTABLE) \ $(HIPEBEAMLDFLAGS) $(LDFLAGS) $(DEXPORT) $(INIT_OBJS) $(OBJS) \ $(STATIC_NIF_LIBS) $(STATIC_DRIVER_LIBS) $(LIBS) endif -endif # ---------------------------------------------------------------------- # Dependencies diff --git a/erts/emulator/beam/atom.names b/erts/emulator/beam/atom.names index f9a2f3e33e..6328b3d18f 100644 --- a/erts/emulator/beam/atom.names +++ b/erts/emulator/beam/atom.names @@ -437,13 +437,6 @@ atom orelse atom os_pid atom os_type atom os_version -atom ose_bg_proc -atom ose_int_proc -atom ose_phantom -atom ose_pri_proc -atom ose_process_prio -atom ose_process_type -atom ose_ti_proc atom out atom out_exited atom out_exiting diff --git a/erts/emulator/beam/erl_alloc.types b/erts/emulator/beam/erl_alloc.types index 1d5dec4807..4804fb407d 100644 --- a/erts/emulator/beam/erl_alloc.types +++ b/erts/emulator/beam/erl_alloc.types @@ -394,21 +394,6 @@ type SYS_WRITE_BUF BINARY SYSTEM sys_write_buf +endif -+if ose - -type SYS_READ_BUF TEMPORARY SYSTEM sys_read_buf -type FD_TAB LONG_LIVED SYSTEM fd_tab -type FD_ENTRY_BUF STANDARD SYSTEM fd_entry_buf -type FD_SIG_LIST SHORT_LIVED SYSTEM fd_sig_list -type DRV_EV STANDARD SYSTEM driver_event -type CS_PROG_PATH LONG_LIVED SYSTEM cs_prog_path -type ENVIRONMENT TEMPORARY SYSTEM environment -type PUTENV_STR SYSTEM SYSTEM putenv_string -type PRT_REP_EXIT STANDARD SYSTEM port_report_exit - -+endif - - +if win32 type DRV_DATA_BUF SYSTEM SYSTEM drv_data_buf diff --git a/erts/emulator/beam/erl_async.c b/erts/emulator/beam/erl_async.c index f071898046..be0bc0cfec 100644 --- a/erts/emulator/beam/erl_async.c +++ b/erts/emulator/beam/erl_async.c @@ -167,7 +167,6 @@ async_ready_q(Uint sched_id) #endif - void erts_init_async(void) { diff --git a/erts/emulator/beam/erl_driver.h b/erts/emulator/beam/erl_driver.h index ef2d41e7a2..e71b87803b 100644 --- a/erts/emulator/beam/erl_driver.h +++ b/erts/emulator/beam/erl_driver.h @@ -690,16 +690,6 @@ EXTERN char *driver_dl_error(void); EXTERN int erl_drv_putenv(char *key, char *value); EXTERN int erl_drv_getenv(char *key, char *value, size_t *value_size); -#ifdef __OSE__ -typedef ErlDrvUInt ErlDrvOseEventId; -EXTERN union SIGNAL *erl_drv_ose_get_signal(ErlDrvEvent ev); -EXTERN ErlDrvEvent erl_drv_ose_event_alloc(SIGSELECT sig, ErlDrvOseEventId handle, - ErlDrvOseEventId (*resolve_signal)(union SIGNAL *sig), void *extra); -EXTERN void erl_drv_ose_event_free(ErlDrvEvent ev); -EXTERN void erl_drv_ose_event_fetch(ErlDrvEvent ev, SIGSELECT *sig, - ErlDrvOseEventId *handle, void **extra); -#endif - #endif /* !ERL_DRIVER_TYPES_ONLY */ #ifdef WIN32_DYNAMIC_ERL_DRIVER diff --git a/erts/emulator/beam/erl_port_task.c b/erts/emulator/beam/erl_port_task.c index 5c38db1cbc..2c09834d19 100644 --- a/erts/emulator/beam/erl_port_task.c +++ b/erts/emulator/beam/erl_port_task.c @@ -1734,7 +1734,7 @@ erts_port_task_execute(ErtsRunQueue *runq, Port **curr_port_pp) reds = ERTS_PORT_REDS_INPUT; ASSERT((state & ERTS_PORT_SFLGS_DEAD) == 0); DTRACE_DRIVER(driver_ready_input, pp); - /* NOTE some windows/ose drivers use ->ready_input + /* NOTE some windows drivers use ->ready_input for input and output */ (*pp->drv_ptr->ready_input)((ErlDrvData) pp->drv_data, ptp->u.alive.td.io.event); diff --git a/erts/emulator/beam/erl_process.c b/erts/emulator/beam/erl_process.c index 135f09c04d..5b13f74dcb 100644 --- a/erts/emulator/beam/erl_process.c +++ b/erts/emulator/beam/erl_process.c @@ -58,11 +58,7 @@ #define ERTS_PROC_MIN_CONTEXT_SWITCH_REDS_COST (CONTEXT_REDS/10) -#ifndef ERTS_SCHED_MIN_SPIN #define ERTS_SCHED_SPIN_UNTIL_YIELD 100 -#else -#define ERTS_SCHED_SPIN_UNTIL_YIELD 1 -#endif #define ERTS_SCHED_SYS_SLEEP_SPINCOUNT_VERY_LONG 40 #define ERTS_SCHED_AUX_WORK_SLEEP_SPINCOUNT_FACT_VERY_LONG 1000 @@ -152,12 +148,7 @@ extern BeamInstr beam_apply[]; extern BeamInstr beam_exit[]; extern BeamInstr beam_continue_exit[]; -#ifdef __OSE__ -/* Eager check I/O not supported on OSE yet. */ -int erts_eager_check_io = 0; -#else int erts_eager_check_io = 1; -#endif int erts_sched_compact_load; int erts_sched_balance_util = 0; Uint erts_no_schedulers; @@ -2521,19 +2512,10 @@ try_set_sys_scheduling(void) #endif static ERTS_INLINE int -prepare_for_sys_schedule(ErtsSchedulerData *esdp, int non_blocking) +prepare_for_sys_schedule(int non_blocking) { if (non_blocking && erts_eager_check_io) { #ifdef ERTS_SMP -#ifdef ERTS_SCHED_ONLY_POLL_SCHED_1 - if (esdp->no != 1) { - /* If we are not scheduler 1 and ERTS_SCHED_ONLY_POLL_SCHED_1 is used - then we make sure to wake scheduler 1 */ - ErtsRunQueue *rq = ERTS_RUNQ_IX(0); - wake_scheduler(rq); - return 0; - } -#endif return try_set_sys_scheduling(); #else return 1; @@ -2543,16 +2525,6 @@ prepare_for_sys_schedule(ErtsSchedulerData *esdp, int non_blocking) #ifdef ERTS_SMP while (!erts_port_task_have_outstanding_io_tasks() && try_set_sys_scheduling()) { -#ifdef ERTS_SCHED_ONLY_POLL_SCHED_1 - if (esdp->no != 1) { - /* If we are not scheduler 1 and ERTS_SCHED_ONLY_POLL_SCHED_1 is used - then we make sure to wake scheduler 1 */ - ErtsRunQueue *rq = ERTS_RUNQ_IX(0); - clear_sys_scheduling(); - wake_scheduler(rq); - return 0; - } -#endif if (!erts_port_task_have_outstanding_io_tasks()) return 1; clear_sys_scheduling(); @@ -2876,8 +2848,6 @@ aux_thread(void *unused) erts_thr_progress_active(NULL, thr_prgr_active = 0); erts_thr_progress_prepare_wait(NULL); - ERTS_SCHED_FAIR_YIELD(); - flgs = sched_spin_wait(ssi, 0); if (flgs & ERTS_SSI_FLG_SLEEPING) { @@ -2945,7 +2915,7 @@ scheduler_wait(int *fcalls, ErtsSchedulerData *esdp, ErtsRunQueue *rq) * be waiting in erl_sys_schedule() */ - if (ERTS_SCHEDULER_IS_DIRTY(esdp) || !prepare_for_sys_schedule(esdp, 0)) { + if (ERTS_SCHEDULER_IS_DIRTY(esdp) || !prepare_for_sys_schedule(0)) { sched_waiting(esdp->no, rq); @@ -3010,8 +2980,6 @@ scheduler_wait(int *fcalls, ErtsSchedulerData *esdp, ErtsRunQueue *rq) erts_thr_progress_prepare_wait(esdp); } - ERTS_SCHED_FAIR_YIELD(); - flgs = sched_spin_wait(ssi, spincount); if (flgs & ERTS_SSI_FLG_SLEEPING) { ASSERT(flgs & ERTS_SSI_FLG_WAITING); @@ -3082,13 +3050,8 @@ scheduler_wait(int *fcalls, ErtsSchedulerData *esdp, ErtsRunQueue *rq) #ifdef ERTS_DIRTY_SCHEDULERS ASSERT(!ERTS_SCHEDULER_IS_DIRTY(esdp)); #endif - -#ifdef ERTS_SCHED_ONLY_POLL_SCHED_1 - ASSERT(esdp->no == 1); -#endif sched_waiting_sys(esdp->no, rq); - erts_smp_runq_unlock(rq); ASSERT(working); @@ -3158,7 +3121,7 @@ scheduler_wait(int *fcalls, ErtsSchedulerData *esdp, ErtsRunQueue *rq) * Got to check that we still got I/O tasks; otherwise * we have to continue checking for I/O... */ - if (!prepare_for_sys_schedule(esdp, 0)) { + if (!prepare_for_sys_schedule(0)) { spincount *= ERTS_SCHED_TSE_SLEEP_SPINCOUNT_FACT; goto tse_wait; } @@ -3180,7 +3143,7 @@ scheduler_wait(int *fcalls, ErtsSchedulerData *esdp, ErtsRunQueue *rq) * Got to check that we still got I/O tasks; otherwise * we have to wait in erl_sys_schedule() after all... */ - if (!prepare_for_sys_schedule(esdp, 0)) { + if (!prepare_for_sys_schedule(0)) { /* * Not allowed to wait in erl_sys_schedule; * do tse wait instead... @@ -5301,17 +5264,11 @@ erts_early_init_scheduling(int no_schedulers) wakeup_other.threshold = ERTS_SCHED_WAKEUP_OTHER_THRESHOLD_MEDIUM; wakeup_other.type = ERTS_SCHED_WAKEUP_OTHER_TYPE_DEFAULT; #endif -#ifndef ERTS_SCHED_MIN_SPIN sched_busy_wait.sys_schedule = ERTS_SCHED_SYS_SLEEP_SPINCOUNT_MEDIUM; sched_busy_wait.tse = (ERTS_SCHED_SYS_SLEEP_SPINCOUNT_MEDIUM * ERTS_SCHED_TSE_SLEEP_SPINCOUNT_FACT); sched_busy_wait.aux_work = (ERTS_SCHED_SYS_SLEEP_SPINCOUNT_MEDIUM * ERTS_SCHED_AUX_WORK_SLEEP_SPINCOUNT_FACT_MEDIUM); -#else - sched_busy_wait.sys_schedule = ERTS_SCHED_SYS_SLEEP_SPINCOUNT_NONE; - sched_busy_wait.tse = ERTS_SCHED_SYS_SLEEP_SPINCOUNT_NONE; - sched_busy_wait.aux_work = ERTS_SCHED_SYS_SLEEP_SPINCOUNT_NONE; -#endif } int @@ -8187,18 +8144,12 @@ erts_start_schedulers(void) erts_snprintf(opts.name, 16, "%lu_scheduler", actual + 1); -#ifdef __OSE__ - /* This should be done in the bind strategy */ - opts.coreNo = (actual+1) % ose_num_cpus(); -#endif - res = ethr_thr_create(&esdp->tid, sched_thread_func, (void*)esdp, &opts); if (res != 0) { break; } } - erts_no_schedulers = actual; #ifdef ERTS_DIRTY_SCHEDULERS @@ -8227,10 +8178,6 @@ erts_start_schedulers(void) erts_snprintf(opts.name, 16, "aux"); -#ifdef __OSE__ - opts.coreNo = 0; -#endif /* __OSE__ */ - res = ethr_thr_create(&aux_tid, aux_thread, NULL, &opts); if (res != 0) erl_exit(1, "Failed to create aux thread\n"); @@ -8250,7 +8197,6 @@ erts_start_schedulers(void) actual, actual == 1 ? " was" : "s were"); erts_send_error_to_logger_nogl(dsbufp); } - } #endif /* ERTS_SMP */ @@ -9391,12 +9337,10 @@ Process *schedule(Process *p, int calls) int leader_update = ERTS_SCHEDULER_IS_DIRTY(esdp) ? 0 : erts_thr_progress_update(esdp); aux_work = erts_atomic32_read_acqb(&esdp->ssi->aux_work); - if (aux_work | leader_update | ERTS_SCHED_FAIR) { + if (aux_work | leader_update) { erts_smp_runq_unlock(rq); if (leader_update) erts_thr_progress_leader_update(esdp); - else if (ERTS_SCHED_FAIR) - ERTS_SCHED_FAIR_YIELD(); if (aux_work) handle_aux_work(&esdp->aux_work_data, aux_work, 0); erts_smp_runq_lock(rq); @@ -9472,7 +9416,7 @@ Process *schedule(Process *p, int calls) } else if (!ERTS_SCHEDULER_IS_DIRTY(esdp) && (fcalls > input_reductions && - prepare_for_sys_schedule(esdp, !0))) { + prepare_for_sys_schedule(!0))) { ErtsMonotonicTime current_time; /* * Schedule system-level activities. diff --git a/erts/emulator/beam/erl_process.h b/erts/emulator/beam/erl_process.h index 20ffe7ea7c..caac89c087 100644 --- a/erts/emulator/beam/erl_process.h +++ b/erts/emulator/beam/erl_process.h @@ -691,13 +691,6 @@ extern ErtsAlignedSchedulerData *erts_aligned_dirty_io_scheduler_data; extern ErtsSchedulerData *erts_scheduler_data; #endif -#ifdef ERTS_SCHED_FAIR -#define ERTS_SCHED_FAIR_YIELD() ETHR_YIELD() -#else -#define ERTS_SCHED_FAIR 0 -#define ERTS_SCHED_FAIR_YIELD() -#endif - #if defined(ERTS_SMP) && defined(ERTS_ENABLE_LOCK_CHECK) int erts_smp_lc_runq_is_locked(ErtsRunQueue *); #endif diff --git a/erts/emulator/beam/erl_trace.c b/erts/emulator/beam/erl_trace.c index e1b03a057f..3a74d752fe 100644 --- a/erts/emulator/beam/erl_trace.c +++ b/erts/emulator/beam/erl_trace.c @@ -3297,8 +3297,6 @@ sys_msg_dispatcher_func(void *unused) if (erts_thr_progress_update(NULL)) erts_thr_progress_leader_update(NULL); - ERTS_SCHED_FAIR_YIELD(); - #ifdef DEBUG_PRINTOUTS print_msg_type(smqp); #endif @@ -3453,9 +3451,6 @@ static void init_sys_msg_dispatcher(void) { erts_smp_thr_opts_t thr_opts = ERTS_SMP_THR_OPTS_DEFAULT_INITER; -#ifdef __OSE__ - thr_opts.coreNo = 0; -#endif thr_opts.detached = 1; thr_opts.name = "sys_msg_dispatcher"; init_smq_element_alloc(); @@ -3463,7 +3458,6 @@ init_sys_msg_dispatcher(void) sys_message_queue_end = NULL; erts_smp_cnd_init(&smq_cnd); erts_smp_mtx_init(&smq_mtx, "sys_msg_q"); - erts_smp_thr_create(&sys_msg_dispatcher_tid, sys_msg_dispatcher_func, NULL, diff --git a/erts/emulator/beam/io.c b/erts/emulator/beam/io.c index 6b4b90cb06..d754fc634e 100644 --- a/erts/emulator/beam/io.c +++ b/erts/emulator/beam/io.c @@ -52,9 +52,7 @@ #include "erl_hl_timer.h" extern ErlDrvEntry fd_driver_entry; -#ifndef __OSE__ extern ErlDrvEntry vanilla_driver_entry; -#endif extern ErlDrvEntry spawn_driver_entry; extern ErlDrvEntry *driver_tab[]; /* table of static drivers, only used during initialization */ @@ -2794,9 +2792,7 @@ void erts_init_io(int port_tab_size, erts_smp_rwmtx_rwlock(&erts_driver_list_lock); init_driver(&fd_driver, &fd_driver_entry, NULL); -#ifndef __OSE__ init_driver(&vanilla_driver, &vanilla_driver_entry, NULL); -#endif init_driver(&spawn_driver, &spawn_driver_entry, NULL); erts_init_static_drivers(); for (dp = driver_tab; *dp != NULL; dp++) diff --git a/erts/emulator/beam/sys.h b/erts/emulator/beam/sys.h index 14eeb0ee8f..34011147d9 100644 --- a/erts/emulator/beam/sys.h +++ b/erts/emulator/beam/sys.h @@ -74,9 +74,7 @@ #if defined (__WIN32__) # include "erl_win_sys.h" -#elif defined (__OSE__) -# include "erl_ose_sys.h" -#else +#else # include "erl_unix_sys.h" #ifndef UNIX # define UNIX 1 diff --git a/erts/emulator/drivers/common/efile_drv.c b/erts/emulator/drivers/common/efile_drv.c index 0317a95e8b..2cb4662fc3 100644 --- a/erts/emulator/drivers/common/efile_drv.c +++ b/erts/emulator/drivers/common/efile_drv.c @@ -101,15 +101,9 @@ # include "config.h" #endif -#ifndef __OSE__ #include <ctype.h> #include <sys/types.h> #include <stdlib.h> -#else -#include "ctype.h" -#include "sys/types.h" -#include "stdlib.h" -#endif /* Need (NON)BLOCKING macros for sendfile */ #ifndef WANT_NONBLOCKING diff --git a/erts/emulator/drivers/common/inet_drv.c b/erts/emulator/drivers/common/inet_drv.c index 549de6503c..31b4b22081 100644 --- a/erts/emulator/drivers/common/inet_drv.c +++ b/erts/emulator/drivers/common/inet_drv.c @@ -94,10 +94,6 @@ typedef unsigned long long llu_t; #define INT16_MAX (32767) #endif -#ifdef __OSE__ -#include "inet.h" -#endif - #ifdef __WIN32__ #define STRNCASECMP strncasecmp @@ -298,139 +294,7 @@ static unsigned long one_value = 1; #define TCP_SHUT_RD SD_RECEIVE #define TCP_SHUT_RDWR SD_BOTH -#elif defined (__OSE__) - -/* - * Some notes about how inet (currently only tcp) works on OSE. - * The driver uses OSE signals to communicate with the one_inet - * process. Because of the difference in how signals and file descriptors - * work the whole select/deselect mechanic is very different. - * In ose when a sock_select is done a function is called. That function - * notes the changes that the driver want to do, but does not act on it. - * later when the function returns the new desired state is compared - * to the previous state and the apprioriate actions are taken. The action - * is usually to either request more data from the stack or stop requesting - * data. - * - * One thing to note is that the driver never does select/deselect. It always - * listens for the signals. Flow of data is regulated by sending or not sending - * signals to the ose inet process. - * - * The interesting functions to look at are: - * * inet_driver_select : called when sock_select is called - * * tcp_inet_ose_dispatch_signal : checks state changes and sends new signals - * * tcp_inet_drv_output_ose : ready output callback, reads signals and calls - * dispatch_signal - * * tcp_inet_drv_input_ose : ready input callback. - */ - -#include "efs.h" -#include "sys/socket.h" -#include "sys/uio.h" -#include "sfk/sys/sfk_uio.h" -#include "netinet/in.h" -#include "netinet/tcp.h" -#include "netdb.h" -#include "ose_spi/socket.sig" - - -static ssize_t writev_fallback(int fd, const struct iovec *iov, int iovcnt, int max_sz); - -#define INVALID_SOCKET -1 -#define INVALID_EVENT -1 -#define SOCKET_ERROR -1 - -#define SOCKET int -#define HANDLE int -#define FD_READ ERL_DRV_READ -#define FD_WRITE ERL_DRV_WRITE -#define FD_CLOSE 0 -#define FD_CONNECT (1<<4) -#define FD_ACCEPT (1<<5) -#define SOCK_FD_ERROR (1<<6) - -#define sock_connect(s, addr, len) connect((s), (addr), (len)) -#define sock_listen(s, b) listen((s), (b)) -#define sock_bind(s, addr, len) bind((s), (addr), (len)) -#define sock_getopt(s,t,n,v,l) getsockopt((s),(t),(n),(v),(l)) -#define sock_setopt(s,t,n,v,l) setsockopt((s),(t),(n),(v),(l)) -#define sock_name(s, addr, len) getsockname((s), (addr), (len)) -#define sock_peer(s, addr, len) getpeername((s), (addr), (len)) -#define sock_ntohs(x) ntohs((x)) -#define sock_ntohl(x) ntohl((x)) -#define sock_htons(x) htons((x)) -#define sock_htonl(x) htonl((x)) - -#define sock_accept(s, addr, len) accept((s), (addr), (len)) -#define sock_send(s,buf,len,flag) inet_send((s),(buf),(len),(flag)) -#define sock_sendto(s,buf,blen,flag,addr,alen) \ - sendto((s),(buf),(blen),(flag),(addr),(alen)) -#define sock_sendv(s, vec, size, np, flag) \ - (*(np) = writev_fallback((s), (struct iovec*)(vec), (size), (*(np)))) -#define sock_sendmsg(s,msghdr,flag) sendmsg((s),(msghdr),(flag)) - -#define sock_open(af, type, proto) socket((af), (type), (proto)) -#define sock_close(s) close((s)) -#define sock_dup(s) dup((s)) -#define sock_shutdown(s, how) shutdown((s), (how)) - -#define sock_hostname(buf, len) gethostname((buf), (len)) -#define sock_getservbyname(name,proto) getservbyname((name), (proto)) -#define sock_getservbyport(port,proto) getservbyport((port), (proto)) - -#define sock_recv(s,buf,len,flag) recv((s),(buf),(len),(flag)) -#define sock_recvfrom(s,buf,blen,flag,addr,alen) \ - recvfrom((s),(buf),(blen),(flag),(addr),(alen)) -#define sock_recvmsg(s,msghdr,flag) recvmsg((s),(msghdr),(flag)) - -#define sock_errno() errno -#define sock_create_event(d) ((d)->s) /* return file descriptor */ -#define sock_close_event(e) /* do nothing */ - -#ifndef WANT_NONBLOCKING -#define WANT_NONBLOCKING -#endif -#include "sys.h" - -typedef unsigned long u_long; -#define IN_CLASSA(a) ((((in_addr_t)(a)) & 0x80000000) == 0) -#define IN_CLASSA_NET 0xff000000 -#define IN_CLASSA_NSHIFT 24 -#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) -#define IN_CLASSA_MAX 128 - -#define IN_CLASSB(a) ((((in_addr_t)(a)) & 0xc0000000) == 0x80000000) -#define IN_CLASSB_NET 0xffff0000 -#define IN_CLASSB_NSHIFT 16 -#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) -#define IN_CLASSB_MAX 65536 - -#define IN_CLASSC(a) ((((in_addr_t)(a)) & 0xe0000000) == 0xc0000000) -#define IN_CLASSC_NET 0xffffff00 -#define IN_CLASSC_NSHIFT 8 -#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) - -#define IN_CLASSD(a) ((((in_addr_t)(a)) & 0xf0000000) == 0xe0000000) -#define IN_MULTICAST(a) IN_CLASSD(a) - -#define IN_EXPERIMENTAL(a) ((((in_addr_t)(a)) & 0xe0000000) == 0xe0000000) -#define IN_BADCLASS(a) ((((in_addr_t)(a)) & 0xf0000000) == 0xf0000000) - -#define sock_select(d, flags, onoff) do { \ - ASSERT(!(d)->is_ignored); \ - (d)->event_mask = (onoff) ? \ - ((d)->event_mask | (flags)) : \ - ((d)->event_mask & ~(flags)); \ - DEBUGF(("(%s / %d) sock_select(%ld): flags=%02X, onoff=%d, event_mask=%02lX, s=%d\r\n", \ - __FILE__, __LINE__, (long) (d)->port, (flags), (onoff), (unsigned long) (d)->event_mask, (d)->s)); \ - inet_driver_select((d), (flags), (onoff)); \ - } while(0) - -#define TCP_SHUT_WR SHUT_WR -#define TCP_SHUT_RD SHUT_RD -#define TCP_SHUT_RDWR SHUT_RDWR - -#else /* !__OSE__ && !__WIN32__ */ +#else /* !__WIN32__ */ #include <sys/time.h> #ifdef NETDB_H_NEEDS_IN_H @@ -704,7 +568,7 @@ static int my_strncasecmp(const char *s1, const char *s2, size_t n) #define TCP_SHUT_RD SHUT_RD #define TCP_SHUT_RDWR SHUT_RDWR -#endif /* !__WIN32__ && !__OSE__ */ +#endif /* !__WIN32__ */ #ifdef HAVE_SOCKLEN_T # define SOCKLEN_T socklen_t @@ -1166,13 +1030,6 @@ typedef struct { char *netns; /* Socket network namespace name as full file path */ #endif -#ifdef __OSE__ - int select_state; /* state to keep track of whether we - should trigger another read/write - request at end of ready_input/output */ - ErlDrvEvent events[6]; -#endif - } inet_descriptor; @@ -1188,10 +1045,8 @@ static void tcp_inet_stop(ErlDrvData); static void tcp_inet_command(ErlDrvData, char*, ErlDrvSizeT); static void tcp_inet_commandv(ErlDrvData, ErlIOVec*); static void tcp_inet_flush(ErlDrvData drv_data); -#ifndef __OSE__ static void tcp_inet_drv_input(ErlDrvData, ErlDrvEvent); static void tcp_inet_drv_output(ErlDrvData data, ErlDrvEvent event); -#endif static ErlDrvData tcp_inet_start(ErlDrvPort, char* command); static ErlDrvSSizeT tcp_inet_ctl(ErlDrvData, unsigned int, char*, ErlDrvSizeT, char**, ErlDrvSizeT); @@ -1204,71 +1059,6 @@ static void tcp_inet_event(ErlDrvData, ErlDrvEvent); static void find_dynamic_functions(void); #endif -#ifdef __OSE__ -/* The structure of the signal used for requesting asynchronous - * notification from the stack. Under normal circumstances the network stack - * shouldn't overwrite the value set in the fd field by the sender - * of the request */ -struct OseAsyncSig { - struct FmEvent event; - int fd; -}; - -union SIGNAL { - SIGSELECT signo; - struct OseAsyncSig async; -}; - -static ErlDrvSSizeT tcp_inet_ctl_ose(ErlDrvData e, unsigned int cmd, - char* buf, ErlDrvSizeT len, - char** rbuf, ErlDrvSizeT rsize); -static void tcp_inet_commandv_ose(ErlDrvData e, ErlIOVec* ev); -static void tcp_inet_drv_output_ose(ErlDrvData data, ErlDrvEvent event); -static void tcp_inet_drv_input_ose(ErlDrvData data, ErlDrvEvent event); -static ErlDrvOseEventId inet_resolve_signal(union SIGNAL *sig); - -#ifdef INET_DRV_DEBUG - -static char *read_req = "SO_EVENT_READ_REQUEST"; -static char *read_rep = "SO_EVENT_READ_REPLY"; -static char *write_req = "SO_EVENT_WRITE_REQUEST"; -static char *write_rep = "SO_EVENT_WRITE_REPLY"; -static char *eof_req = "SO_EVENT_EOF_REQUEST"; -static char *eof_rep = "SO_EVENT_EOF_REPLY"; -static char *accept_req = "SO_EVENT_ACCEPT_REQUEST"; -static char *accept_rep = "SO_EVENT_ACCEPT_REPLY"; -static char *connect_req = "SO_EVENT_CONNECT_REQUEST"; -static char *connect_rep = "SO_EVENT_CONNECT_REPLY"; -static char *error_req = "SO_EVENT_ERROR_REQUEST"; -static char *error_rep = "SO_EVENT_ERROR_REPLY"; -static char signo_tmp[32]; - -static char *signo_to_string(SIGSELECT signo) { - switch (signo) { - case SO_EVENT_READ_REQUEST: { return read_req; } - case SO_EVENT_READ_REPLY: { return read_rep; } - case SO_EVENT_WRITE_REQUEST: { return write_req; } - case SO_EVENT_WRITE_REPLY: { return write_rep; } - case SO_EVENT_EOF_REQUEST: { return eof_req; } - case SO_EVENT_EOF_REPLY: { return eof_rep; } - case SO_EVENT_ACCEPT_REQUEST: { return accept_req; } - case SO_EVENT_ACCEPT_REPLY: { return accept_rep; } - case SO_EVENT_CONNECT_REQUEST: { return connect_req; } - case SO_EVENT_CONNECT_REPLY: { return connect_rep; } - case SO_EVENT_ERROR_REQUEST: { return error_req; } - case SO_EVENT_ERROR_REPLY: { return error_rep; } - } - - snprintf(signo_tmp,32,"0x%x",signo); - - return signo_tmp; -} - -#endif - -#endif /* __OSE__ */ - - static struct erl_drv_entry tcp_inet_driver_entry = { tcp_inet_init, /* inet_init will add this driver !! */ @@ -1278,9 +1068,6 @@ static struct erl_drv_entry tcp_inet_driver_entry = #ifdef __WIN32__ tcp_inet_event, NULL, -#elif defined(__OSE__) - tcp_inet_drv_input_ose, /*ready_input*/ - tcp_inet_drv_output_ose, /*ready_output*/ #else tcp_inet_drv_input, tcp_inet_drv_output, @@ -1288,17 +1075,9 @@ static struct erl_drv_entry tcp_inet_driver_entry = "tcp_inet", NULL, NULL, -#ifdef __OSE__ - tcp_inet_ctl_ose, -#else tcp_inet_ctl, -#endif tcp_inet_timeout, -#ifdef __OSE__ - tcp_inet_commandv_ose, -#else tcp_inet_commandv, -#endif NULL, tcp_inet_flush, NULL, @@ -1450,14 +1229,6 @@ static int packet_inet_output(udp_descriptor* udesc, HANDLE event); /* convert descriptor pointer to inet_descriptor pointer */ #define INETP(d) (&(d)->inet) -#ifdef __OSE__ -static void inet_driver_select(inet_descriptor* desc, - int flags, int onoff); -static void tcp_inet_ose_dispatch_signals(tcp_descriptor *desc, - int prev_select_state, - union SIGNAL *sig); -#endif - static int async_ref = 0; /* async reference id generator */ #define NEW_ASYNC_ID() ((async_ref++) & 0xffff) @@ -4353,16 +4124,6 @@ static void desc_close(inet_descriptor* desc) desc->forced_events = 0; desc->send_would_block = 0; #endif -#ifdef __OSE__ - if (desc->events[0]) { - driver_select(desc->port,desc->events[0],FD_READ|FD_WRITE|ERL_DRV_USE,0); - driver_select(desc->port,desc->events[1],FD_READ|FD_WRITE|ERL_DRV_USE,0); - driver_select(desc->port,desc->events[2],FD_READ|FD_WRITE|ERL_DRV_USE,0); - driver_select(desc->port,desc->events[3],FD_READ|FD_WRITE|ERL_DRV_USE,0); - driver_select(desc->port,desc->events[4],FD_READ|FD_WRITE|ERL_DRV_USE,0); - driver_select(desc->port,desc->events[5],FD_READ|FD_WRITE|ERL_DRV_USE,0); - } -#else /* * We should close the fd here, but the other driver might still * be selecting on it. @@ -4372,7 +4133,6 @@ static void desc_close(inet_descriptor* desc) ERL_DRV_USE, 0); else inet_stop_select((ErlDrvEvent)(long)desc->event,NULL); -#endif desc->event = INVALID_EVENT; /* closed by stop_select callback */ desc->s = INVALID_SOCKET; desc->event_mask = 0; @@ -4414,65 +4174,6 @@ static int erl_inet_close(inet_descriptor* desc) return 0; } -#ifdef __OSE__ -static void inet_select_init(inet_descriptor* desc) -{ - desc->events[0] = - erl_drv_ose_event_alloc(SO_EVENT_READ_REPLY, - desc->s, - inet_resolve_signal, - NULL); - driver_select(desc->port, desc->events[0], - ERL_DRV_READ|ERL_DRV_USE, 1); - - desc->events[1] = - erl_drv_ose_event_alloc(SO_EVENT_EOF_REPLY, - desc->s, - inet_resolve_signal, - NULL); - driver_select(desc->port, desc->events[1], - ERL_DRV_READ|ERL_DRV_USE, 1); - - desc->events[2] = - erl_drv_ose_event_alloc(SO_EVENT_ACCEPT_REPLY, - desc->s, - inet_resolve_signal, - NULL); - driver_select(desc->port, desc->events[2], - ERL_DRV_READ|ERL_DRV_USE, 1); - - /* trigger tcp_inet_input */ - desc->events[3] = - erl_drv_ose_event_alloc(SO_EVENT_WRITE_REPLY, - desc->s, - inet_resolve_signal, - NULL); - driver_select(desc->port, desc->events[3], - ERL_DRV_WRITE|ERL_DRV_USE, 1); - - desc->events[4] = - erl_drv_ose_event_alloc(SO_EVENT_CONNECT_REPLY, - desc->s, - inet_resolve_signal, - NULL); - driver_select(desc->port, desc->events[4], - ERL_DRV_WRITE|ERL_DRV_USE, 1); - - desc->events[5] = - erl_drv_ose_event_alloc(SO_EVENT_ERROR_REPLY, - desc->s, - inet_resolve_signal, - NULL); - driver_select(desc->port, desc->events[5], - ERL_DRV_WRITE|ERL_DRV_USE, 1); - - /* Issue a select on error event before any other select to be sure we are - prepared to receive error notifications from the stack, even in the - situations when select isn't issued */ - sock_select(desc, SOCK_FD_ERROR, 1); -} -#endif - static ErlDrvSSizeT inet_ctl_open(inet_descriptor* desc, int domain, int type, char** rbuf, ErlDrvSizeT rsize) { @@ -4555,9 +4256,6 @@ static ErlDrvSSizeT inet_ctl_open(inet_descriptor* desc, int domain, int type, #ifdef __WIN32__ driver_select(desc->port, desc->event, ERL_DRV_READ, 1); #endif -#ifdef __OSE__ - inet_select_init(desc); -#endif desc->state = INET_STATE_OPEN; desc->stype = type; @@ -4581,13 +4279,7 @@ static ErlDrvSSizeT inet_ctl_fdopen(inet_descriptor* desc, int domain, int type, if (name.sa.sa_family != domain) return ctl_error(EINVAL, rbuf, rsize); } -#ifdef __OSE__ - /* for fdopen duplicating the sd will allow to uniquely identify - the signal from OSE with erlang port */ - desc->s = sock_dup(s); -#else desc->s = s; -#endif if ((desc->event = sock_create_event(desc)) == INVALID_EVENT) return ctl_error(sock_errno(), rbuf, rsize); @@ -4605,12 +4297,6 @@ static ErlDrvSSizeT inet_ctl_fdopen(inet_descriptor* desc, int domain, int type, sz = sizeof(name); if (!IS_SOCKET_ERROR(sock_peer(s, (struct sockaddr*) &name, &sz))) { desc->state = INET_STATE_CONNECTED; -#ifdef __OSE__ - /* since we are dealing with different descriptors (i.e. inet and - socket) the select part should be initialized with the right - values */ - inet_select_init(desc); -#endif } } @@ -8404,15 +8090,6 @@ static ErlDrvData inet_start(ErlDrvPort port, int size, int protocol) #ifdef HAVE_SETNS desc->netns = NULL; #endif -#ifdef __OSE__ - desc->select_state = 0; - desc->events[0] = NULL; - desc->events[1] = NULL; - desc->events[2] = NULL; - desc->events[3] = NULL; - desc->events[4] = NULL; - desc->events[5] = NULL; -#endif return (ErlDrvData)desc; } @@ -9139,10 +8816,6 @@ static tcp_descriptor* tcp_inet_copy(tcp_descriptor* desc,SOCKET s, copy_desc->inet.port = port; copy_desc->inet.dport = driver_mk_port(port); -#ifdef __OSE__ - inet_select_init(©_desc->inet); -#endif - *err = 0; return copy_desc; } @@ -9204,23 +8877,6 @@ static void tcp_inet_stop(ErlDrvData e) inet_stop(INETP(desc)); } -#ifdef __OSE__ - -static ErlDrvSSizeT tcp_inet_ctl_ose(ErlDrvData e, unsigned int cmd, - char* buf, ErlDrvSizeT len, - char** rbuf, ErlDrvSizeT rsize) { - - tcp_descriptor* desc = (tcp_descriptor*)e; - int prev_select_state = INETP(desc)->select_state; - - ErlDrvSSizeT res = tcp_inet_ctl(e,cmd,buf,len,rbuf,rsize); - - tcp_inet_ose_dispatch_signals((tcp_descriptor*)e,prev_select_state,NULL); - - return res; -} -#endif - /* TCP requests from Erlang */ static ErlDrvSSizeT tcp_inet_ctl(ErlDrvData e, unsigned int cmd, char* buf, ErlDrvSizeT len, @@ -9662,17 +9318,6 @@ static void tcp_inet_command(ErlDrvData e, char *buf, ErlDrvSizeT len) DEBUGF(("tcp_inet_command(%ld) }\r\n", (long)desc->inet.port)); } -#ifdef __OSE__ - -static void tcp_inet_commandv_ose(ErlDrvData e, ErlIOVec* ev) { - int prev_select_state = INETP((tcp_descriptor*)e)->select_state; - tcp_inet_commandv(e, ev); - tcp_inet_ose_dispatch_signals((tcp_descriptor*)e,prev_select_state,NULL); -} - -#endif - - static void tcp_inet_commandv(ErlDrvData e, ErlIOVec* ev) { tcp_descriptor* desc = (tcp_descriptor*)e; @@ -9745,22 +9390,6 @@ static void inet_stop_select(ErlDrvEvent event, void* _) { #ifdef __WIN32__ WSACloseEvent((HANDLE)event); -#elif defined(__OSE__) - ErlDrvOseEventId id; - union SIGNAL *sig; - erl_drv_ose_event_fetch(event, NULL, &id,NULL); - DEBUGF(("inet_stop_select(?#?) {s=%d\n",id)); - sock_close((int)id); - /* On socket close all the signals waiting to be processed as part of the - select should be deallocated */ - while((sig = erl_drv_ose_get_signal(event))) { - DEBUGF(("inet_stop_select(?#?): Freeing signal %s\n", - signo_to_string(sig->signo))); - free_buf(&sig); - } - erl_drv_ose_event_free(event); - DEBUGF(("inet_stop_select(?#?) }\n")); - #else sock_close((SOCKET)(long)event); #endif @@ -10309,146 +9938,7 @@ static void tcp_inet_event(ErlDrvData e, ErlDrvEvent event) return; } -#elif defined(__OSE__) /* !__WIN32__ */ -/* The specific resolve signal function. It will return the socket descriptor - for which the select was issued */ -static ErlDrvOseEventId inet_resolve_signal(union SIGNAL *sig) { - DEBUGF(("%s(?#?): s=%d got signal %s, status = %d, extra = %d, sender = 0x%x\n", - __FUNCTION__,sig->async.fd,signo_to_string(sig->signo), - sig->async.event.status, - sig->async.event.extra,sender(&sig))); - if (sig->signo == SO_EVENT_READ_REPLY || - sig->signo == SO_EVENT_ACCEPT_REPLY || - sig->signo == SO_EVENT_EOF_REPLY || - sig->signo == SO_EVENT_WRITE_REPLY || - sig->signo == SO_EVENT_ERROR_REPLY || - sig->signo == SO_EVENT_CONNECT_REPLY ) { - return sig->async.fd; - } - - return -1; -} - -static void inet_driver_select(inet_descriptor* desc, - int flags, int onoff) { - ASSERT(!desc->is_ignored); - - if(onoff) { - desc->select_state |= flags; - } else { - desc->select_state &= ~flags; - } -} - -static ssize_t writev_fallback(int fd, const struct iovec *iov, int iovcnt, int max_sz) -{ - size_t data_len = 0; - size_t sent = 0; - ssize_t n; - int i; - - for(i = 0; i < iovcnt; i++) - { - data_len = iov[i].iov_len; -tryagain: - n = sock_send(fd, iov[i].iov_base, data_len, 0); - if (IS_SOCKET_ERROR(n)) { - /* If buffer length is greater than the amount stack is able to - * send out then try to send at least max_sz (this comes with - * SO_EVENT_WRITE_REPLY signal*/ - if ((errno == EMSGSIZE) && (max_sz > 0) && (data_len > max_sz)) { - data_len = max_sz; - goto tryagain; - } - break; - } - sent += n; - } - return sent; -} - -#define OSE_EVENT_REQ(TCP_DESC,EVENT) do { \ - union SIGNAL *sig = alloc(sizeof(struct OseAsyncSig), EVENT); \ - sig->async.fd = INETP(TCP_DESC)->s; \ - ose_request_event(INETP(TCP_DESC)->s, &sig, 1); \ - DEBUGF(("%s(%ld): s=%d sent %s\r\n",__FUNCTION__, \ - INETP(TCP_DESC)->port,INETP(TCP_DESC)->s,signo_to_string(EVENT))); \ - } while(0) - -static void tcp_inet_ose_dispatch_signals(tcp_descriptor *desc, - int prev_select_state, - union SIGNAL *sig) { - if (sig) { - DEBUGF(("tcp_inet_ose_dispatch_signals(%ld) {s=%d resend\r\n", - (long)INETP(desc)->port,INETP(desc)->s)); - /* We are reacting to a signal, which means that if - the select_state for that signal is still activated - we should send a new signal */ - switch (sig->signo) { - case SO_EVENT_READ_REPLY: { - if (INETP(desc)->select_state & FD_READ) - OSE_EVENT_REQ(desc,SO_EVENT_READ_REQUEST); - break; - } - case SO_EVENT_WRITE_REPLY: { - if (INETP(desc)->select_state & FD_WRITE) - OSE_EVENT_REQ(desc,SO_EVENT_WRITE_REQUEST); - break; - } - case SO_EVENT_CONNECT_REPLY: { - if (INETP(desc)->select_state & FD_CONNECT) - OSE_EVENT_REQ(desc,SO_EVENT_CONNECT_REQUEST); - break; - } - case SO_EVENT_ACCEPT_REPLY: { - if (INETP(desc)->select_state & FD_ACCEPT) - OSE_EVENT_REQ(desc,SO_EVENT_ACCEPT_REQUEST); - break; - } - case SO_EVENT_ERROR_REPLY: { - if (INETP(desc)->select_state & SOCK_FD_ERROR) - OSE_EVENT_REQ(desc,SO_EVENT_ERROR_REQUEST); - break; - } - - } - DEBUGF(("tcp_inet_ose_dispatch_signals(%ld) }\r\n", - (long)INETP(desc)->port)); - } - - if (INETP(desc)->select_state != prev_select_state) { - /* If the select state has changed we have to issue signals for - the state parts that have changed. */ - int xor_select_state = INETP(desc)->select_state ^ prev_select_state; - DEBUGF(("tcp_inet_ose_dispatch_signals(%ld) {s=%d select change\r\n", - (long)INETP(desc)->port,INETP(desc)->s)); - if ((xor_select_state & FD_READ) && - (INETP(desc)->select_state & FD_READ)) { - OSE_EVENT_REQ(desc,SO_EVENT_READ_REQUEST); - } - if ((xor_select_state & FD_WRITE) && - (INETP(desc)->select_state & FD_WRITE)) { - OSE_EVENT_REQ(desc,SO_EVENT_WRITE_REQUEST); - } - if ((xor_select_state & FD_CONNECT) && - (INETP(desc)->select_state & FD_CONNECT)) { - OSE_EVENT_REQ(desc,SO_EVENT_CONNECT_REQUEST); - } - if ((xor_select_state & FD_ACCEPT) && - (INETP(desc)->select_state & FD_ACCEPT)) { - OSE_EVENT_REQ(desc,SO_EVENT_ACCEPT_REQUEST); - } - if ((xor_select_state & SOCK_FD_ERROR) && - (INETP(desc)->select_state & SOCK_FD_ERROR)) { - OSE_EVENT_REQ(desc,SO_EVENT_ERROR_REQUEST); - } - - DEBUGF(("tcp_inet_ose_dispatch_signals(%ld) }\r\n", - (long)INETP(desc)->port)); - } -} - -#endif /* __OSE__ */ +#endif /* __WIN32__ */ /* socket has input: @@ -10935,49 +10425,6 @@ static void tcp_shutdown_async(tcp_descriptor* desc) desc->tcp_add_flags |= TCP_ADDF_SHUTDOWN_WR_DONE; } -#ifdef __OSE__ - -static void tcp_inet_drv_output_ose(ErlDrvData data, ErlDrvEvent event) -{ - union SIGNAL *event_sig = erl_drv_ose_get_signal(event); - - while (event_sig) { - int prev_select_state = INETP((tcp_descriptor*)data)->select_state; - int res = tcp_inet_output((tcp_descriptor*)data, (HANDLE)event_sig); - if (res != -1) { - tcp_inet_ose_dispatch_signals((tcp_descriptor*)data, - prev_select_state,event_sig); - free_buf(&event_sig); - event_sig = erl_drv_ose_get_signal(event); - } else { - /* NOTE: here the event object could have been deallocated!!!! - inet_stop_select is called when doing driver_select(ERL_DRV_USE,0) - */ - free_buf(&event_sig); - return; - } - } -} - -static void tcp_inet_drv_input_ose(ErlDrvData data, ErlDrvEvent event) -{ - union SIGNAL *event_sig = erl_drv_ose_get_signal(event); - - while (event_sig) { - int prev_select_state = INETP((tcp_descriptor*)data)->select_state; - int res = tcp_inet_input((tcp_descriptor*)data, (HANDLE)event); - if (res != -1) { - tcp_inet_ose_dispatch_signals((tcp_descriptor*)data, prev_select_state, - event_sig); - free_buf(&event_sig); - event_sig = erl_drv_ose_get_signal(event); - } else { - free_buf(&event_sig); - return; - } - } -} -#else static void tcp_inet_drv_output(ErlDrvData data, ErlDrvEvent event) { (void)tcp_inet_output((tcp_descriptor*)data, (HANDLE)event); @@ -10987,7 +10434,6 @@ static void tcp_inet_drv_input(ErlDrvData data, ErlDrvEvent event) { (void)tcp_inet_input((tcp_descriptor*)data, (HANDLE)event); } -#endif /* socket ready for ouput: ** 1. INET_STATE_CONNECTING => non block connect ? @@ -11053,13 +10499,6 @@ static int tcp_inet_output(tcp_descriptor* desc, HANDLE event) ssize_t n; SysIOVec* iov; -#ifdef __OSE__ - /* For large size buffers case the amount of data that the stack is - able to send out (received in the .extra field) should be passed - down to writev_fallback */ - n = event ? ((union SIGNAL*)event)->async.event.extra : 0; -#endif - if ((iov = driver_peekq(ix, &vsize)) == NULL) { sock_select(INETP(desc), FD_WRITE, 0); send_empty_out_q_msgs(INETP(desc)); @@ -11087,12 +10526,6 @@ static int tcp_inet_output(tcp_descriptor* desc, HANDLE event) sizes > (max 32 bit signed int) */ size_t howmuch = 0x7FFFFFFF; /* max signed 32 bit */ int x; -#ifdef __OSE__ - /* For EWOULDBLOCK sock_sendv returns 0 so we have to be sure it - wasn't the case */ - if(sock_errno() == ERRNO_BLOCK) - goto done; -#endif for(x = 0; x < vsize && iov[x].iov_len == 0; ++x) ; if (x < vsize) { diff --git a/erts/emulator/drivers/ose/ose_efile.c b/erts/emulator/drivers/ose/ose_efile.c deleted file mode 100644 index c8337a95d5..0000000000 --- a/erts/emulator/drivers/ose/ose_efile.c +++ /dev/null @@ -1,1125 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 1997-2012. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -/* - * Purpose: Provides file and directory operations for OSE. - */ -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif -#if defined(HAVE_POSIX_FALLOCATE) && !defined(__sun) && !defined(__sun__) -#define _XOPEN_SOURCE 600 -#endif -#if !defined(_GNU_SOURCE) && defined(HAVE_LINUX_FALLOC_H) -#define _GNU_SOURCE -#endif -#include "sys.h" -#include "erl_driver.h" -#include "erl_efile.h" -#if defined(DARWIN) || defined(HAVE_LINUX_FALLOC_H) || defined(HAVE_POSIX_FALLOCATE) -#include "fcntl.h" -#endif -#include "ose.h" -#include "unistd.h" -#include "sys/stat.h" -#include "dirent.h" -#include "sys/time.h" -#include "time.h" -#include "assert.h" - -/* Find a definition of MAXIOV, that is used in the code later. */ -#if defined IOV_MAX -#define MAXIOV IOV_MAX -#elif defined UIO_MAXIOV -#define MAXIOV UIO_MAXIOV -#else -#define MAXIOV 16 -#endif - -/* - * Macros for testing file types. - */ - -#define ISDIR(st) (((st).st_mode & S_IFMT) == S_IFDIR) -#define ISREG(st) (((st).st_mode & S_IFMT) == S_IFREG) -#define ISDEV(st) \ - (((st).st_mode&S_IFMT) == S_IFCHR || ((st).st_mode&S_IFMT) == S_IFBLK) -#define ISLNK(st) (((st).st_mode & S_IFLNK) == S_IFLNK) -#ifdef NO_UMASK -#define FILE_MODE 0644 -#define DIR_MODE 0755 -#else -#define FILE_MODE 0666 -#define DIR_MODE 0777 -#endif - -#define IS_DOT_OR_DOTDOT(s) \ - (s[0] == '.' && (s[1] == '\0' || (s[1] == '.' && s[2] == '\0'))) - -/* - * Macros for handling local file descriptors - * and mutexes. - * - * Handling of files like this is necessary because OSE - * does not allow seeking after the end of a file. So - * what we do it emulate this by keeping track of the size - * of the file and where the file's positions is. If a - * write happens after eof then we pad it. - * - * Given time this should be rewritten to get rid of the - * mutex and use the port lock to protect the data. This - * could be done be done by adapting the efile api for some - * calls to allow some meta-data to be associated with the - * open file. - */ - -#define L_FD_IS_VALID(fd_data) ((fd_data)->beyond_eof > 0) -#define L_FD_INVALIDATE(fd_data) (fd_data)->beyond_eof = 0 -#define L_FD_CUR(fd_data) (fd_data)->pos -#define L_FD_OFFS_BEYOND_EOF(fd_data, offs) \ - (((fd_data)->size > offs) ? 0 : 1) - -#define L_FD_FAIL -1 -#define L_FD_SUCCESS 1 -#define L_FD_PAD_SIZE 255 - -struct fd_meta { - ErlDrvMutex *meta_mtx; - struct fd_data *fd_data_list; -}; - -struct fd_data { - int fd; - struct fd_data *next; - struct fd_data *prev; - int pos; - int beyond_eof; - size_t size; -#ifdef DEBUG - PROCESS owner; -#endif -}; - -static int l_invalidate_local_fd(int fd); -static int l_pad_file(struct fd_data *fd_data, off_t offset); -static int check_error(int result, Efile_error* errInfo); -static struct fd_data* l_new_fd(void); -static int l_remove_local_fd(int fd); -static struct fd_data* l_find_local_fd(int fd); -static int l_update_local_fd(int fd, int pos, int size); - -static struct fd_meta* fdm = NULL; - - -/***************************************************************************/ - -static int -l_remove_local_fd(int fd) -{ - struct fd_data *fd_data; - fd_data = l_find_local_fd(fd); - - if (fd_data == NULL) { - return L_FD_FAIL; - } -#ifdef DEBUG - assert(fd_data->owner == current_process()); -#endif - erl_drv_mutex_lock(fdm->meta_mtx); - /* head ? */ - if (fd_data == fdm->fd_data_list) { - if (fd_data->next != NULL) { - /* remove link to head */ - fd_data->next->prev = NULL; - /* set new head */ - fdm->fd_data_list = fd_data->next; - } - else { - /* head is lonely */ - fdm->fd_data_list = NULL; - } - } - else { /* not head */ - if (fd_data->prev == NULL) { - erl_drv_mutex_unlock(fdm->meta_mtx); - return L_FD_FAIL; - } - else { - if (fd_data->next != NULL) { - fd_data->next->prev = fd_data->prev; - fd_data->prev->next = fd_data->next; - } - else { - fd_data->prev->next = NULL; - } - } - } - - /* scramble values */ - fd_data->beyond_eof = -1; - fd_data->next = NULL; - fd_data->prev = NULL; - fd_data->fd = -1; - - /* unlock and clean */ - driver_free(fd_data); - erl_drv_mutex_unlock(fdm->meta_mtx); - - return L_FD_SUCCESS; -} - -/***************************************************************************/ - -static int -l_invalidate_local_fd(int fd) { - struct fd_data *fd_data; - - if ((fd_data = l_find_local_fd(fd)) == NULL) { - return L_FD_FAIL; - } - - fd_data->beyond_eof = 0; - return L_FD_SUCCESS; -} - -/****************************************************************************/ - -static struct fd_data* -l_find_local_fd(int fd) { - struct fd_data *fd_data; - - fd_data = NULL; - erl_drv_mutex_lock(fdm->meta_mtx); - for (fd_data = fdm->fd_data_list; fd_data != NULL; ) { - if (fd_data->fd == fd) { -#ifdef DEBUG - assert(fd_data->owner == current_process()); -#endif - break; - } - fd_data = fd_data->next; - } - erl_drv_mutex_unlock(fdm->meta_mtx); - return fd_data; -} - -/***************************************************************************/ - -static struct fd_data* -l_new_fd(void) { - struct fd_data *fd_data; - - fd_data = driver_alloc(sizeof(struct fd_data)); - if (fd_data == NULL) { - return NULL; - } - erl_drv_mutex_lock(fdm->meta_mtx); - if (fdm->fd_data_list == NULL) { - fdm->fd_data_list = fd_data; - fdm->fd_data_list->prev = NULL; - fdm->fd_data_list->next = NULL; - } - else { - fd_data->next = fdm->fd_data_list; - fdm->fd_data_list = fd_data; - fdm->fd_data_list->prev = NULL; - } -#ifdef DEBUG - fd_data->owner = current_process(); -#endif - erl_drv_mutex_unlock(fdm->meta_mtx); - return fd_data; -} - -/***************************************************************************/ - -static int -l_update_local_fd(int fd, int pos, int size) { - struct fd_data *fd_data = NULL; - - fd_data = l_find_local_fd(fd); - /* new fd to handle? */ - if (fd_data == NULL) { - fd_data = l_new_fd(); - if (fd_data == NULL) { - /* out of memory */ - return L_FD_FAIL; - } - } - fd_data->size = size; - fd_data->pos = pos; - fd_data->fd = fd; - fd_data->beyond_eof = 1; - - return L_FD_SUCCESS; -} - -/***************************************************************************/ - -static int -l_pad_file(struct fd_data *fd_data, off_t offset) { - int size_dif; - int written = 0; - int ret_val = L_FD_SUCCESS; - char padding[L_FD_PAD_SIZE]; - - size_dif = (offset - fd_data->size); - memset(&padding, '\0', L_FD_PAD_SIZE); - - while (size_dif > 0) { - written = write(fd_data->fd, padding, - (size_dif < L_FD_PAD_SIZE) ? - size_dif : L_FD_PAD_SIZE); - if (written < 0 && errno != EINTR && errno != EAGAIN) { - ret_val = -1; - break; - } - size_dif -= written; - } - L_FD_INVALIDATE(fd_data); - return ret_val; -} - -/***************************************************************************/ - -static int -check_error(int result, Efile_error *errInfo) { - if (result < 0) { - errInfo->posix_errno = errInfo->os_errno = errno; - return 0; - } - return 1; -} - -/***************************************************************************/ - -int -efile_init() { - fdm = driver_alloc(sizeof(struct fd_meta)); - if (fdm == NULL) { - return L_FD_FAIL; - } - fdm->meta_mtx = erl_drv_mutex_create("ose_efile local fd mutex\n"); - erl_drv_mutex_lock(fdm->meta_mtx); - fdm->fd_data_list = NULL; - erl_drv_mutex_unlock(fdm->meta_mtx); - return L_FD_SUCCESS; -} - -/***************************************************************************/ - -int -efile_mkdir(Efile_error* errInfo, /* Where to return error codes. */ - char* name) /* Name of directory to create. */ -{ -#ifdef NO_MKDIR_MODE - return check_error(mkdir(name), errInfo); -#else - int res = mkdir(name, DIR_MODE); - if (res < 0 && errno == EINVAL) { - errno = ENOENT; - } - return check_error(res, errInfo); -#endif -} - -/***************************************************************************/ - -int -efile_rmdir(Efile_error* errInfo, /* Where to return error codes. */ - char* name) /* Name of directory to delete. */ -{ - if (rmdir(name) == 0) { - return 1; - } - if (errno == ENOTEMPTY) { - errno = EEXIST; - } - if (errno == EEXIST || errno == EINVAL) { - int saved_errno = errno; - struct stat file_stat; - struct stat cwd_stat; - - if(stat(name, &file_stat) != 0) { - errno = ENOENT; - return check_error(-1, errInfo); - } - /* - * The error code might be wrong if this is the current directory. - */ - if (stat(name, &file_stat) == 0 && stat(".", &cwd_stat) == 0 && - file_stat.st_ino == cwd_stat.st_ino && - file_stat.st_dev == cwd_stat.st_dev) { - saved_errno = EACCES; - } - errno = saved_errno; - } - return check_error(-1, errInfo); -} - -/***************************************************************************/ - -int -efile_delete_file(Efile_error* errInfo, /* Where to return error codes. */ - char* name) /* Name of file to delete. */ -{ - struct stat statbuf; - - if (stat(name, &statbuf) >= 0) { - /* Do not let unlink() remove directories */ - if (ISDIR(statbuf)) { - errno = EPERM; - return check_error(-1, errInfo); - } - - if (unlink(name) == 0) { - return 1; - } - - if (errno == EISDIR) { - errno = EPERM; - return check_error(-1, errInfo); - } - } - else { - if (errno == EINVAL) { - errno = ENOENT; - return check_error(-1, errInfo); - } - } - return check_error(-1, errInfo); -} - -/* - *--------------------------------------------------------------------------- - * - * Changes the name of an existing file or directory, from src to dst. - * If src and dst refer to the same file or directory, does nothing - * and returns success. Otherwise if dst already exists, it will be - * deleted and replaced by src subject to the following conditions: - * If src is a directory, dst may be an empty directory. - * If src is a file, dst may be a file. - * In any other situation where dst already exists, the rename will - * fail. - * - * Results: - * If the directory was successfully created, returns 1. - * Otherwise the return value is 0 and errno is set to - * indicate the error. Some possible values for errno are: - * - * EACCES: src or dst parent directory can't be read and/or written. - * EEXIST: dst is a non-empty directory. - * EINVAL: src is a root directory or dst is a subdirectory of src. - * EISDIR: dst is a directory, but src is not. - * ENOENT: src doesn't exist, or src or dst is "". - * ENOTDIR: src is a directory, but dst is not. - * EXDEV: src and dst are on different filesystems. - * - * Side effects: - * The implementation of rename may allow cross-filesystem renames, - * but the caller should be prepared to emulate it with copy and - * delete if errno is EXDEV. - * - *--------------------------------------------------------------------------- - */ - -int -efile_rename(Efile_error* errInfo, /* Where to return error codes. */ - char* src, /* Original name. */ - char* dst) /* New name. */ -{ - - /* temporary fix AFM does not recognize ./<file name> - * in destination remove pending on adaption of AFM fix - */ - - char *dot_str; - if (dst != NULL) { - dot_str = strchr(dst, '.'); - if (dot_str && dot_str == dst && dot_str[1] == '/') { - dst = dst+2; - } - } - - if (rename(src, dst) == 0) { - return 1; - } - if (errno == ENOTEMPTY) { - errno = EEXIST; - } - if (errno == EINVAL) { - struct stat file_stat; - - if (stat(dst, &file_stat)== 0) { - if (ISDIR(file_stat)) { - errno = EISDIR; - } - else if (ISREG(file_stat)) { - errno = ENOTDIR; - } - else { - errno = EINVAL; - } - } - else { - errno = EINVAL; - } - } - - if (strcmp(src, "/") == 0) { - errno = EINVAL; - } - return check_error(-1, errInfo); -} - -/***************************************************************************/ - -int -efile_chdir(Efile_error* errInfo, /* Where to return error codes. */ - char* name) /* Name of directory to make current. */ -{ - return check_error(chdir(name), errInfo); -} - -/***************************************************************************/ - -int -efile_getdcwd(Efile_error* errInfo, /* Where to return error codes. */ - int drive, /* 0 - current, 1 - A, 2 - B etc. */ - char* buffer, /* Where to return the current - directory. */ - size_t size) /* Size of buffer. */ -{ - if (drive == 0) { - if (getcwd(buffer, size) == NULL) - return check_error(-1, errInfo); - - return 1; - } - - /* - * Drives other than 0 is not supported on Unix. - */ - - errno = ENOTSUP; - return check_error(-1, errInfo); -} - -/***************************************************************************/ - -int -efile_readdir(Efile_error* errInfo, /* Where to return error codes. */ - char* name, /* Name of directory to open. */ - EFILE_DIR_HANDLE* p_dir_handle, /* Pointer to directory - handle of - open directory.*/ - char* buffer, /* Pointer to buffer for - one filename. */ - size_t *size) /* in-out Size of buffer, length - of name. */ -{ - DIR *dp; /* Pointer to directory structure. */ - struct dirent* dirp; /* Pointer to directory entry. */ - - /* - * If this is the first call, we must open the directory. - */ - - if (*p_dir_handle == NULL) { - dp = opendir(name); - if (dp == NULL) - return check_error(-1, errInfo); - *p_dir_handle = (EFILE_DIR_HANDLE) dp; - } - - /* - * Retrieve the name of the next file using the directory handle. - */ - - dp = *((DIR **)((void *)p_dir_handle)); - for (;;) { - dirp = readdir(dp); - if (dirp == NULL) { - closedir(dp); - return 0; - } - if (IS_DOT_OR_DOTDOT(dirp->d_name)) - continue; - buffer[0] = '\0'; - strncat(buffer, dirp->d_name, (*size)-1); - *size = strlen(dirp->d_name); - return 1; - } -} - -/***************************************************************************/ - -int -efile_openfile(Efile_error* errInfo, /* Where to return error codes. */ - char* name, /* Name of directory to open. */ - int flags, /* Flags to user for opening. */ - int* pfd, /* Where to store the file - descriptor. */ - Sint64 *pSize) /* Where to store the size of the - file. */ -{ - struct stat statbuf; - int fd; - int mode; /* Open mode. */ - - if (stat(name, &statbuf) >= 0 && !ISREG(statbuf)) { - errno = EISDIR; - return check_error(-1, errInfo); - } - - switch (flags & (EFILE_MODE_READ|EFILE_MODE_WRITE)) { - case EFILE_MODE_READ: - mode = O_RDONLY; - break; - case EFILE_MODE_WRITE: - if (flags & EFILE_NO_TRUNCATE) - mode = O_WRONLY | O_CREAT; - else - mode = O_WRONLY | O_CREAT | O_TRUNC; - break; - case EFILE_MODE_READ_WRITE: - mode = O_RDWR | O_CREAT; - break; - default: - errno = EINVAL; - return check_error(-1, errInfo); - } - - - if (flags & EFILE_MODE_APPEND) { - mode &= ~O_TRUNC; - mode |= O_APPEND; - } - - if (flags & EFILE_MODE_EXCL) { - mode |= O_EXCL; - } - - fd = open(name, mode, FILE_MODE); - - if (!check_error(fd, errInfo)) - return 0; - - *pfd = fd; - if (pSize) { - *pSize = statbuf.st_size; - } - return 1; -} - -/***************************************************************************/ - -int -efile_may_openfile(Efile_error* errInfo, char *name) { - struct stat statbuf; /* Information about the file */ - int result; - - result = stat(name, &statbuf); - if (!check_error(result, errInfo)) - return 0; - if (!ISREG(statbuf)) { - errno = EISDIR; - return check_error(-1, errInfo); - } - return 1; -} - -/***************************************************************************/ - -void -efile_closefile(int fd) -{ - if (l_find_local_fd(fd) != NULL) { - l_remove_local_fd(fd); - } - close(fd); -} - -/***************************************************************************/ - -int -efile_fdatasync(Efile_error *errInfo, /* Where to return error codes. */ - int fd) /* File descriptor for file to sync data. */ -{ - return efile_fsync(errInfo, fd); -} - -/***************************************************************************/ - -int -efile_fsync(Efile_error *errInfo, /* Where to return error codes. */ - int fd) /* File descriptor for file to sync. */ -{ - return check_error(fsync(fd), errInfo); -} - -/***************************************************************************/ - -int -efile_fileinfo(Efile_error* errInfo, Efile_info* pInfo, - char* name, int info_for_link) -{ - struct stat statbuf; /* Information about the file */ - int result; - - result = stat(name, &statbuf); - if (!check_error(result, errInfo)) { - return 0; - } - -#if SIZEOF_OFF_T == 4 - pInfo->size_high = 0; -#else - pInfo->size_high = (Uint32)(statbuf.st_size >> 32); -#endif - pInfo->size_low = (Uint32)statbuf.st_size; - -#ifdef NO_ACCESS - /* Just look at read/write access for owner. */ - - pInfo->access = ((statbuf.st_mode >> 6) & 07) >> 1; - -#else - pInfo->access = FA_NONE; - if (access(name, R_OK) == 0) - pInfo->access |= FA_READ; - if (access(name, W_OK) == 0) - pInfo->access |= FA_WRITE; - -#endif - - if (ISDEV(statbuf)) - pInfo->type = FT_DEVICE; - else if (ISDIR(statbuf)) - pInfo->type = FT_DIRECTORY; - else if (ISREG(statbuf)) - pInfo->type = FT_REGULAR; - else if (ISLNK(statbuf)) - pInfo->type = FT_SYMLINK; - else - pInfo->type = FT_OTHER; - - pInfo->accessTime = statbuf.st_atime; - pInfo->modifyTime = statbuf.st_mtime; - pInfo->cTime = statbuf.st_ctime; - - pInfo->mode = statbuf.st_mode; - pInfo->links = statbuf.st_nlink; - pInfo->major_device = statbuf.st_dev; - pInfo->inode = statbuf.st_ino; - pInfo->uid = statbuf.st_uid; - pInfo->gid = statbuf.st_gid; - - return 1; -} - -/***************************************************************************/ - -int -efile_write_info(Efile_error *errInfo, Efile_info *pInfo, char *name) -{ - /* - * On some systems chown will always fail for a non-root user unless - * POSIX_CHOWN_RESTRICTED is not set. Others will succeed as long as - * you don't try to chown a file to someone besides youself. - */ - if (pInfo->mode != -1) { - mode_t newMode = pInfo->mode & (S_ISUID | S_ISGID | - S_IRWXU | S_IRWXG | S_IRWXO); - if (chmod(name, newMode)) { - newMode &= ~(S_ISUID | S_ISGID); - if (chmod(name, newMode)) { - return check_error(-1, errInfo); - } - } - } - - return 1; -} - -/***************************************************************************/ - -int -efile_write(Efile_error* errInfo, /* Where to return error codes. */ - int flags, /* Flags given when file was - opened. */ - int fd, /* File descriptor to write to. */ - char* buf, /* Buffer to write. */ - size_t count) /* Number of bytes to write. */ -{ - ssize_t written; /* Bytes written in last operation. */ - struct fd_data *fd_data; - - if ((fd_data = l_find_local_fd(fd)) != NULL) { - if (L_FD_IS_VALID(fd_data)) { - /* we are beyond eof and need to pad*/ - if (l_pad_file(fd_data, L_FD_CUR(fd_data)) < 0) { - return check_error(-1, errInfo); - } - } - } - - while (count > 0) { - if ((written = write(fd, buf, count)) < 0) { - if (errno != EINTR) { - return check_error(-1, errInfo); - } - else { - written = 0; - } - } - ASSERT(written <= count); - buf += written; - count -= written; - } - return 1; -} - -/***************************************************************************/ - -int -efile_writev(Efile_error* errInfo, /* Where to return error codes */ - int flags, /* Flags given when file was - * opened */ - int fd, /* File descriptor to write to */ - SysIOVec* iov, /* Vector of buffer structs. - * The structs may be changed i.e. - * due to incomplete writes */ - int iovcnt) /* Number of structs in vector */ -{ - struct fd_data *fd_data; - int cnt = 0; /* Buffers so far written */ - - ASSERT(iovcnt >= 0); - if ((fd_data = l_find_local_fd(fd)) != NULL) { - if (L_FD_IS_VALID(fd_data)) { - /* we are beyond eof and need to pad*/ - if (l_pad_file(fd_data, L_FD_CUR(fd_data)) < 0) { - return check_error(-1, errInfo); - } - } - } - while (cnt < iovcnt) { - if ((! iov[cnt].iov_base) || (iov[cnt].iov_len <= 0)) { - /* Empty buffer - skip */ - cnt++; - } - else { /* Non-empty buffer */ - ssize_t w; /* Bytes written in this call */ - do { - w = write(fd, iov[cnt].iov_base, iov[cnt].iov_len); - } while (w < 0 && errno == EINTR); - - ASSERT(w <= iov[cnt].iov_len || w == -1); - - if (w < 0) { - return check_error(-1, errInfo); - } - /* Move forward to next buffer to write */ - for (; cnt < iovcnt && w > 0; cnt++) { - if (iov[cnt].iov_base && iov[cnt].iov_len > 0) { - if (w < iov[cnt].iov_len) { - /* Adjust the buffer for next write */ - iov[cnt].iov_len -= w; - iov[cnt].iov_base += w; - w = 0; - break; - } - else { - w -= iov[cnt].iov_len; - } - } - } - ASSERT(w == 0); - } /* else Non-empty buffer */ - } /* while (cnt< iovcnt) */ - return 1; -} - -/***************************************************************************/ - -int -efile_read(Efile_error* errInfo, /* Where to return error codes. */ - int flags, /* Flags given when file was opened. */ - int fd, /* File descriptor to read from. */ - char* buf, /* Buffer to read into. */ - size_t count, /* Number of bytes to read. */ - size_t *pBytesRead) /* Where to return number of - bytes read. */ -{ - ssize_t n; - struct fd_data *fd_data; - - if ((fd_data = l_find_local_fd(fd)) != NULL) { - if (L_FD_IS_VALID(fd_data)) { - *pBytesRead = 0; - return 1; - } - } - for (;;) { - if ((n = read(fd, buf, count)) >= 0) { - break; - } - else if (errno != EINTR) { - return check_error(-1, errInfo); - } - } - if (fd_data != NULL && L_FD_IS_VALID(fd_data)) { - L_FD_INVALIDATE(fd_data); - } - *pBytesRead = (size_t) n; - return 1; -} - -/* pread() and pwrite() */ -/* Some unix systems, notably Solaris has these syscalls */ -/* It is especially nice for i.e. the dets module to have support */ -/* for this, even if the underlying OS dosn't support it, it is */ -/* reasonably easy to work around by first calling seek, and then */ -/* calling read(). */ -/* This later strategy however changes the file pointer, which pread() */ -/* does not do. We choose to ignore this and say that the location */ -/* of the file pointer is undefined after a call to any of the p functions*/ - - -int -efile_pread(Efile_error* errInfo, /* Where to return error codes. */ - int fd, /* File descriptor to read from. */ - Sint64 offset, /* Offset in bytes from BOF. */ - char* buf, /* Buffer to read into. */ - size_t count, /* Number of bytes to read. */ - size_t *pBytesRead) /* Where to return - number of bytes read. */ -{ - int res = efile_seek(errInfo, fd, offset, EFILE_SEEK_SET, NULL); - if (res) { - return efile_read(errInfo, 0, fd, buf, count, pBytesRead); - } else { - return res; - } -} - - -/***************************************************************************/ - -int -efile_pwrite(Efile_error* errInfo, /* Where to return error codes. */ - int fd, /* File descriptor to write to. */ - char* buf, /* Buffer to write. */ - size_t count, /* Number of bytes to write. */ - Sint64 offset) /* where to write it */ -{ - int res = efile_seek(errInfo, fd, offset, EFILE_SEEK_SET, NULL); - - if (res) { - return efile_write(errInfo, 0, fd, buf, count); - } else { - return res; - } -} - -/***************************************************************************/ - -int -efile_seek(Efile_error* errInfo, /* Where to return error codes. */ - int fd, /* File descriptor to do the seek on. */ - Sint64 offset, /* Offset in bytes from the given - origin. */ - int origin, /* Origin of seek (SEEK_SET, SEEK_CUR, - SEEK_END). */ - Sint64 *new_location) /* Resulting new location in file. */ -{ - off_t off, result; - off = (off_t) offset; - - switch (origin) { - case EFILE_SEEK_SET: - origin = SEEK_SET; - break; - case EFILE_SEEK_CUR: - origin = SEEK_CUR; - break; - case EFILE_SEEK_END: - origin = SEEK_END; - break; - default: - errno = EINVAL; - return check_error(-1, errInfo); - } - - if (off != offset) { - errno = EINVAL; - return check_error(-1, errInfo); - } - - errno = 0; - result = lseek(fd, off, origin); - - if (result >= 0) { - l_invalidate_local_fd(fd); - } - - if (result < 0) - { - if (errno == ENOSYS) { - int size, cur_pos; - - if (off < 0) { - errno = EINVAL; - return check_error(-1, errInfo); - } - - cur_pos = lseek(fd, 0, SEEK_CUR); - size = lseek(fd, 0, SEEK_END); - - if (origin == SEEK_SET) { - result = offset; - } - else if (origin == SEEK_CUR) { - result = offset + cur_pos; - } - else if (origin == SEEK_END) { - result = size + offset; - } - - /* sanity check our result */ - if (size > result) { - return check_error(-1, errInfo); - } - - /* store the data localy */ - l_update_local_fd(fd, result, size); - - /* reset the original file position */ - if (origin != SEEK_END) { - lseek(fd, cur_pos, SEEK_SET); - } - } - else if (errno == 0) { - errno = EINVAL; - } - } - - if (new_location) { - *new_location = result; - } - - return 1; -} - -/***************************************************************************/ - -int -efile_truncate_file(Efile_error* errInfo, int *fd, int flags) -{ - off_t offset; - struct fd_data *fd_data; - - if ((fd_data = l_find_local_fd(*fd)) != NULL && L_FD_IS_VALID(fd_data)) { - offset = L_FD_CUR(fd_data); - } - else { - offset = lseek(*fd, 0, SEEK_CUR); - } - - return check_error(((offset >= 0) && - (ftruncate(*fd, offset) == 0)) ? 1 : -1, errInfo); -} - -/***************************************************************************/ - -int -efile_readlink(Efile_error* errInfo, char* name, char* buffer, size_t size) -{ - errno = ENOTSUP; - return check_error(-1, errInfo); -} - -/***************************************************************************/ - -int -efile_altname(Efile_error* errInfo, char* name, char* buffer, size_t size) -{ - errno = ENOTSUP; - return check_error(-1, errInfo); -} - -/***************************************************************************/ - -int -efile_link(Efile_error* errInfo, char* old, char* new) -{ - errno = ENOTSUP; - return check_error(-1, errInfo); -} - -/***************************************************************************/ - -int -efile_symlink(Efile_error* errInfo, char* old, char* new) -{ - errno = ENOTSUP; - return check_error(-1, errInfo); -} - -/***************************************************************************/ - -int -efile_fadvise(Efile_error* errInfo, int fd, Sint64 offset, - Sint64 length, int advise) -{ - return check_error(posix_fadvise(fd, offset, length, advise), errInfo); -} - -/***************************************************************************/ - -static int -call_posix_fallocate(int fd, Sint64 offset, Sint64 length) -{ - int ret; - - /* - * On Linux and Solaris for example, posix_fallocate() returns - * a positive error number on error and it does not set errno. - * On FreeBSD however (9.0 at least), it returns -1 on error - * and it sets errno. - */ - do { - ret = posix_fallocate(fd, (off_t) offset, (off_t) length); - if (ret > 0) { - errno = ret; - ret = -1; - } - } while (ret != 0 && errno == EINTR); - - return ret; -} - -/***************************************************************************/ - -int -efile_fallocate(Efile_error* errInfo, int fd, Sint64 offset, Sint64 length) -{ - return check_error(call_posix_fallocate(fd, offset, length), errInfo); -} diff --git a/erts/emulator/drivers/ose/ose_signal_drv.c b/erts/emulator/drivers/ose/ose_signal_drv.c deleted file mode 100644 index 2be9462a47..0000000000 --- a/erts/emulator/drivers/ose/ose_signal_drv.c +++ /dev/null @@ -1,897 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2013-2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include "errno.h" -#include "stdio.h" -#include "string.h" -#include "stddef.h" - -#include "sys.h" -#include "erl_driver.h" -#include "ose.h" - - -#ifdef HAVE_OSE_SPI_H -#include "ose_spi/ose_spi.h" -#endif - -#define DEBUG_ATTACH 0 -#define DEBUG_HUNT 0 -#define DEBUG_SEND 0 -#define DEBUG_LISTEN 0 - -#if 0 -#define DEBUGP(FMT,...) printf(FMT, __VA_ARGS__) -#else -#define DEBUGP(FMT,...) -#endif - -#if DEBUG_ATTACH -#define DEBUGP_ATTACH(...) DEBUGP( __VA_ARGS__) -#else -#define DEBUGP_ATTACH(...) -#endif - -#if DEBUG_HUNT -#define DEBUGP_HUNT(...) DEBUGP( __VA_ARGS__) -#else -#define DEBUGP_HUNT(...) -#endif - -#if DEBUG_LISTEN -#define DEBUGP_LISTEN(...) DEBUGP( __VA_ARGS__) -#else -#define DEBUGP_LISTEN(...) -#endif - -#if DEBUG_SEND -#define DEBUGP_SEND(...) DEBUGP( __VA_ARGS__) -#else -#define DEBUGP_SEND(...) -#endif - - -#define DRIVER_NAME "ose_signal_drv" -#define GET_SPID 1 -#define GET_NAME 2 -#define HUNT 100 -#define DEHUNT 101 -#define ATTACH 102 -#define DETACH 103 -#define SEND 104 -#define SEND_W_S 105 -#define LISTEN 106 -#define OPEN 200 - -#define REF_SEGMENT_SIZE 8 - -struct async { - SIGSELECT signo; - ErlDrvTermData port; - ErlDrvTermData proc; - PROCESS spid; - PROCESS target; - Uint32 ref; -}; - -/** - * OSE signals - **/ -union SIGNAL { - SIGSELECT signo; - struct async async; -}; - -/** - * The driver's context - **/ -typedef struct _driver_context { - ErlDrvPort port; - PROCESS spid; - ErlDrvEvent perm_events[2]; - ErlDrvEvent *events; - Uint32 event_cnt; - Uint32 ref; - Uint32 *outstanding_refs; - Uint32 outstanding_refs_max; - Uint32 outstanding_refs_cnt; -} driver_context_t; - -/** - * Global variables - **/ -static ErlDrvTermData a_ok; -static ErlDrvTermData a_error; -static ErlDrvTermData a_enomem; -static ErlDrvTermData a_enoent; -static ErlDrvTermData a_badarg; -static ErlDrvTermData a_mailbox_up; -static ErlDrvTermData a_mailbox_down; -static ErlDrvTermData a_ose_drv_reply; -static ErlDrvTermData a_message; -static PROCESS proxy_proc; - - -/** - * Serialize/unserialize unsigned 32-bit values - **/ -static char *put_u32(unsigned int value, char *ptr) { - *ptr++ = (value & 0xff000000) >> 24; - *ptr++ = (value & 0x00ff0000) >> 16; - *ptr++ = (value & 0x0000ff00) >> 8; - *ptr++ = (value & 0xff); - - return ptr; -} - -static unsigned int get_u32(char *ptr) { - unsigned int result = 0; - result += (ptr[0] & 0xff) << 24; - result += (ptr[1] & 0xff) << 16; - result += (ptr[2] & 0xff) << 8; - result += (ptr[3] & 0xff); - - return result; -} - - -/* Stolen from efile_drv.c */ - -/* char EV_CHAR_P(ErlIOVec *ev, int p, int q) */ -#define EV_CHAR_P(ev, p, q) \ - (((char *)(ev)->iov[(q)].iov_base) + (p)) - -/* int EV_GET_CHAR(ErlIOVec *ev, char *p, int *pp, int *qp) */ -#define EV_GET_CHAR(ev, p, pp, qp) ev_get_char(ev, p ,pp, qp) -static int -ev_get_char(ErlIOVec *ev, char *p, int *pp, int *qp) { - if (*(pp)+1 <= (ev)->iov[*(qp)].iov_len) { - *(p) = *EV_CHAR_P(ev, *(pp), *(qp)); - if (*(pp)+1 < (ev)->iov[*(qp)].iov_len) - *(pp) = *(pp)+1; - else { - (*(qp))++; - *pp = 0; - } - return !0; - } - return 0; -} - -/* Uint32 EV_UINT32(ErlIOVec *ev, int p, int q)*/ -#define EV_UINT32(ev, p, q) \ - ((Uint32) *(((unsigned char *)(ev)->iov[(q)].iov_base) + (p))) - -/* int EV_GET_UINT32(ErlIOVec *ev, Uint32 *p, int *pp, int *qp) */ -#define EV_GET_UINT32(ev, p, pp, qp) ev_get_uint32(ev,(Uint32*)(p),pp,qp) -static int -ev_get_uint32(ErlIOVec *ev, Uint32 *p, int *pp, int *qp) { - if (*(pp)+4 <= (ev)->iov[*(qp)].iov_len) { - *(p) = (EV_UINT32(ev, *(pp), *(qp)) << 24) - | (EV_UINT32(ev, *(pp)+1, *(qp)) << 16) - | (EV_UINT32(ev, *(pp)+2, *(qp)) << 8) - | (EV_UINT32(ev, *(pp)+3, *(qp))); - if (*(pp)+4 < (ev)->iov[*(qp)].iov_len) - *(pp) = *(pp)+4; - else { - (*(qp))++; - *pp = 0; - } - return !0; - } - return 0; -} - -/** - * Convinience macros - **/ -#define send_response(port,output) erl_drv_send_term(driver_mk_port(port),\ - driver_caller(port), output, sizeof(output) / sizeof(output[0])); - -void iov_memcpy(void *dest,ErlIOVec *ev,int ind,int off); -void iov_memcpy(void *dest,ErlIOVec *ev,int ind,int off) { - int i; - memcpy(dest,ev->iov[ind].iov_base+off,ev->iov[ind].iov_len-off); - for (i = ind+1; i < ev->vsize; i++) - memcpy(dest,ev->iov[i].iov_base,ev->iov[i].iov_len); -} - -/** - * Reference handling - **/ - -static int add_reference(driver_context_t *ctxt, Uint32 ref) { - - /* - * Premature optimizations may be evil, but they sure are fun. - */ - - if (ctxt->outstanding_refs == NULL) { - /* First ref to be ignored */ - ctxt->outstanding_refs = driver_alloc(REF_SEGMENT_SIZE*sizeof(Uint32)); - if (!ctxt->outstanding_refs) - return 1; - - memset(ctxt->outstanding_refs,0,REF_SEGMENT_SIZE*sizeof(Uint32)); - ctxt->outstanding_refs_max += REF_SEGMENT_SIZE; - ctxt->outstanding_refs[ctxt->outstanding_refs_cnt++] = ref; - } else if (ctxt->outstanding_refs_cnt == ctxt->outstanding_refs_max) { - /* Expand ref array */ - Uint32 *new_array; - ctxt->outstanding_refs_max += REF_SEGMENT_SIZE; - new_array = driver_realloc(ctxt->outstanding_refs, - ctxt->outstanding_refs_max*sizeof(Uint32)); - - if (!new_array) { - ctxt->outstanding_refs_max -= REF_SEGMENT_SIZE; - return 1; - } - - ctxt->outstanding_refs = new_array; - - memset(ctxt->outstanding_refs+ctxt->outstanding_refs_cnt,0, - REF_SEGMENT_SIZE*sizeof(Uint32)); - ctxt->outstanding_refs[ctxt->outstanding_refs_cnt++] = ref; - - } else { - /* Find an empty slot: - * First we try current index, - * then we scan for a slot. - */ - if (!ctxt->outstanding_refs[ctxt->outstanding_refs_cnt]) { - ctxt->outstanding_refs[ctxt->outstanding_refs_cnt++] = ref; - } else { - int i; - ASSERT(ctxt->outstanding_refs_cnt < ctxt->outstanding_refs_max); - for (i = 0; i < ctxt->outstanding_refs_max; i++) - if (!ctxt->outstanding_refs[i]) - break; - ASSERT(ctxt->outstanding_refs[i] == 0); - ctxt->outstanding_refs[i] = ref; - ctxt->outstanding_refs_cnt++; - } - } - return 0; -} - -/* Return 0 if removed, 1 if does not exist, */ -static int remove_reference(driver_context_t *ctxt, Uint32 ref) { - int i,j; - - if (ctxt->outstanding_refs_max == 0 && ctxt->outstanding_refs_cnt == 0) { - ASSERT(ctxt->outstanding_refs == NULL); - return 1; - } - - for (i = 0; i < ctxt->outstanding_refs_max; i++) { - if (ctxt->outstanding_refs[i] == ref) { - ctxt->outstanding_refs[i] = 0; - ctxt->outstanding_refs_cnt--; - i = -1; - break; - } - } - - if (i != -1) - return 1; - - if (ctxt->outstanding_refs_cnt == 0) { - driver_free(ctxt->outstanding_refs); - ctxt->outstanding_refs = NULL; - ctxt->outstanding_refs_max = 0; - } else if (ctxt->outstanding_refs_cnt == (ctxt->outstanding_refs_max - REF_SEGMENT_SIZE)) { - Uint32 *new_array; - for (i = 0, j = 0; i < ctxt->outstanding_refs_cnt; i++) { - if (ctxt->outstanding_refs[i] == 0) { - for (j = i+1; j < ctxt->outstanding_refs_max; j++) - if (ctxt->outstanding_refs[j]) { - ctxt->outstanding_refs[i] = ctxt->outstanding_refs[j]; - ctxt->outstanding_refs[j] = 0; - break; - } - } - } - ctxt->outstanding_refs_max -= REF_SEGMENT_SIZE; - new_array = driver_realloc(ctxt->outstanding_refs, - ctxt->outstanding_refs_max*sizeof(Uint32)); - if (!new_array) { - ctxt->outstanding_refs_max += REF_SEGMENT_SIZE; - return 2; - } - - ctxt->outstanding_refs = new_array; - - } - - return 0; -} - -/** - * The OSE proxy process. This only handles ERTS_SIGNAL_OSE_DRV_ATTACH. - * The process is needed because signals triggered by attach ignore - * redir tables. - * - * We have one global proxy process to save memory. An attempt to make each - * port phantom into a proxy was made, but that used way to much memory. - */ -static OS_PROCESS(driver_proxy_process) { - SIGSELECT sigs[] = {1,ERTS_SIGNAL_OSE_DRV_ATTACH}; - PROCESS master = 0; - - while (1) { - union SIGNAL *sig = receive(sigs); - - if (sig->signo == ERTS_SIGNAL_OSE_DRV_ATTACH) { - - /* The first message is used to determine who to send messages to. */ - if (master == 0) - master = sender(&sig); - - if (sig->async.target == 0) { - PROCESS from = sender(&sig); - restore(sig); - DEBUGP_ATTACH("0x%x: got attach 0x%x, sending to 0x%x\n", - current_process(),from,master); - sig->async.target = from; - send(&sig,master); - } else { - PROCESS target = sig->async.target; - restore(sig); - sig->async.target = 0; - DEBUGP_ATTACH("0x%x: doing attach on 0x%x\n",current_process(),target); - attach(&sig,target); - } - } - } -} - - -/** - * Init routine for the driver - **/ -static int drv_init(void) { - - a_ok = driver_mk_atom("ok"); - a_error = driver_mk_atom("error"); - a_enomem = driver_mk_atom("enomem"); - a_enoent = driver_mk_atom("enoent"); - a_badarg = driver_mk_atom("badarg"); - a_mailbox_up = driver_mk_atom("mailbox_up"); - a_mailbox_down = driver_mk_atom("mailbox_down"); - a_ose_drv_reply = driver_mk_atom("ose_drv_reply"); - a_message = driver_mk_atom("message"); - - proxy_proc = create_process(get_ptype(current_process()), - "ose_signal_driver_proxy", - driver_proxy_process, 10000, - get_pri(current_process()), - 0, 0, NULL, 0, 0); - -#ifdef DEBUG - efs_clone(proxy_proc); -#endif - start(proxy_proc); - - return 0; -} - -/* Signal resolution callback */ -static ErlDrvOseEventId resolve_signal(union SIGNAL* osig) { - union SIGNAL *sig = osig; - if (sig->signo == ERTS_SIGNAL_OSE_DRV_HUNT || - sig->signo == ERTS_SIGNAL_OSE_DRV_ATTACH) { - return sig->async.spid; - } - DEBUGP("%p: Got signal %d sent to %p from 0x%p\n", - current_process(),sig->signo,addressee(&sig),sender(&sig)); - return addressee(&sig); -} - - -/** - * Start routine for the driver - **/ -static ErlDrvData drv_start(ErlDrvPort port, char *command) -{ - driver_context_t *ctxt = driver_alloc(sizeof(driver_context_t)); - - ctxt->perm_events[0] = NULL; - ctxt->perm_events[1] = NULL; - - ctxt->spid = 0; - ctxt->port = port; - ctxt->event_cnt = 0; - ctxt->events = NULL; - ctxt->ref = 0; - ctxt->outstanding_refs = NULL; - ctxt->outstanding_refs_max = 0; - ctxt->outstanding_refs_cnt = 0; - - - /* Set the communication protocol to Erlang to be binary */ - set_port_control_flags(port, PORT_CONTROL_FLAG_BINARY); - - /* Everything ok */ - return (ErlDrvData)ctxt; -} - -/** - * Stop routine for the driver - **/ -static void drv_stop(ErlDrvData driver_data) -{ - driver_context_t *ctxt = (driver_context_t *)driver_data; - int i; - - /* HUNT + ATTACH */ - if (ctxt->perm_events[0]) - driver_select(ctxt->port, ctxt->perm_events[0], - ERL_DRV_USE|ERL_DRV_READ, 0); - if (ctxt->perm_events[1]) - driver_select(ctxt->port, ctxt->perm_events[1], - ERL_DRV_USE|ERL_DRV_READ, 0); - - for (i = 0; i < ctxt->event_cnt; i++) { - driver_select(ctxt->port, ctxt->events[i], ERL_DRV_USE|ERL_DRV_READ, 0); - } - - if (ctxt->spid != 0) - kill_proc(ctxt->spid); - DEBUGP("0x%x: stopped\n",ctxt->spid); - if (ctxt->events) - driver_free(ctxt->events); - if (ctxt->outstanding_refs) - driver_free(ctxt->outstanding_refs); - - driver_free(ctxt); -} - -/** - * Output from Erlang - **/ -static void outputv(ErlDrvData driver_data, ErlIOVec *ev) -{ - driver_context_t *ctxt = (driver_context_t *)driver_data; - int p = 0, q = 1; - char cmd; - - if (! EV_GET_CHAR(ev,&cmd,&p,&q)) { - ErlDrvTermData output[] = { - ERL_DRV_ATOM, a_ose_drv_reply, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_ATOM, a_badarg, - ERL_DRV_TUPLE, 3}; - send_response(ctxt->port, output); - return; - } - - /* Command is in the buffer's first byte */ - switch(cmd) { - - case OPEN: { - char *name = driver_alloc(ev->size - 1+1); - struct OS_redir_entry redir[2]; - - redir[0].sig = 1; - redir[0].pid = current_process(); - - iov_memcpy(name,ev,q,p); - name[ev->size-1] = '\0'; - - ctxt->spid = create_process(OS_PHANTOM, name, NULL, 0, - 0, 0, 0, redir, 0, 0); - - DEBUGP("0x%x: open\n",ctxt->spid); - - ctxt->perm_events[1] = - erl_drv_ose_event_alloc(ERTS_SIGNAL_OSE_DRV_ATTACH,(int)ctxt->spid, - resolve_signal, NULL); - driver_select(ctxt->port,ctxt->perm_events[1],ERL_DRV_READ|ERL_DRV_USE,1); - - ctxt->perm_events[0] = - erl_drv_ose_event_alloc(ERTS_SIGNAL_OSE_DRV_HUNT,(int)ctxt->spid, - resolve_signal, NULL); - driver_select(ctxt->port,ctxt->perm_events[0],ERL_DRV_READ|ERL_DRV_USE,1); - - start(ctxt->spid); - - { - ErlDrvTermData output[] = { - ERL_DRV_ATOM, a_ose_drv_reply, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_ATOM, a_ok, - ERL_DRV_TUPLE, 3}; - - send_response(ctxt->port, output); - } - - break; - - } - - case ATTACH: - case HUNT: - { - union SIGNAL *sig = alloc(sizeof(union SIGNAL), - cmd == HUNT ? ERTS_SIGNAL_OSE_DRV_HUNT:ERTS_SIGNAL_OSE_DRV_ATTACH); - - sig->async.port = driver_mk_port(ctxt->port); - sig->async.proc = driver_caller(ctxt->port); - sig->async.spid = ctxt->spid; - sig->async.ref = ++ctxt->ref; - - if (add_reference(ctxt,ctxt->ref)) { - ErlDrvTermData output[] = { - ERL_DRV_ATOM, a_ose_drv_reply, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_ATOM, a_enomem, - ERL_DRV_TUPLE, 3}; - send_response(ctxt->port, output); - free_buf(&sig); - } else { - ErlDrvTermData output[] = { - ERL_DRV_ATOM, a_ose_drv_reply, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_INT, (ErlDrvUInt)ctxt->ref, - ERL_DRV_TUPLE, 2, - ERL_DRV_TUPLE, 3}; - send_response(ctxt->port, output); - - if (cmd == HUNT) { - char *huntname = driver_alloc(sizeof(char)*((ev->size-1)+1)); - - iov_memcpy(huntname,ev,q,p); - huntname[ev->size-1] = '\0'; - - DEBUGP_HUNT("0x%x: hunt %s -> %u (%u,%u)\n", - ctxt->spid,huntname,ctxt->ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - - hunt(huntname, 0, NULL, &sig); - - driver_free(huntname); - } else { - EV_GET_UINT32(ev,&sig->async.target,&p,&q); - DEBUGP_ATTACH("0x%x: attach %u -> %u (%u,%u)\n", - ctxt->spid,sig->async.target, - ctxt->ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - - send(&sig,proxy_proc); - } - - } - - break; - } - - case DETACH: - case DEHUNT: - { - - Uint32 ref; - - EV_GET_UINT32(ev,&ref,&p,&q); - if (cmd == DETACH) { - DEBUGP_ATTACH("0x%x: detach %u (%u,%u)\n",ctxt->spid,ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - } else { - DEBUGP_HUNT("0x%x: dehunt %u (%u,%u)\n",ctxt->spid,ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - } - - if (remove_reference(ctxt,ref)) { - ErlDrvTermData output[] = { - ERL_DRV_ATOM, a_ose_drv_reply, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_ATOM, a_error, - ERL_DRV_ATOM, a_enoent, - ERL_DRV_TUPLE, 2, - ERL_DRV_TUPLE, 3}; - - send_response(ctxt->port, output); - } else { - ErlDrvTermData output[] = { - ERL_DRV_ATOM, a_ose_drv_reply, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_ATOM, a_ok, - ERL_DRV_TUPLE, 3}; - - send_response(ctxt->port, output); - } - - break; - } - - case SEND: - case SEND_W_S: - { - PROCESS spid; - PROCESS sender; - SIGSELECT signo; - OSBUFSIZE size = ev->size-9; - union SIGNAL *sig; - - EV_GET_UINT32(ev,&spid,&p,&q); - - if (cmd == SEND_W_S) { - EV_GET_UINT32(ev,&sender,&p,&q); - size -= 4; - } else { - sender = ctxt->spid; - } - - EV_GET_UINT32(ev,&signo,&p,&q); - - sig = alloc(size + sizeof(SIGSELECT),signo); - - if (cmd == SEND_W_S) { - DEBUGP_SEND("0x%x: send_w_s(%u,%u,%u)\n",ctxt->spid,spid,signo,sender); - } else { - DEBUGP_SEND("0x%x: send(%u,%u)\n",ctxt->spid,spid,signo); - } - - iov_memcpy(((char *)&sig->signo) + sizeof(SIGSELECT),ev,q,p); - - send_w_s(&sig, sender, spid); - - break; - } - - case LISTEN: - { - int i,j,event_cnt = (ev->size - 1)/4; - ErlDrvEvent *events = NULL; - SIGSELECT signo,tmp_signo; - - if (event_cnt == 0) { - for (i = 0; i < ctxt->event_cnt; i++) - driver_select(ctxt->port,ctxt->events[i],ERL_DRV_READ|ERL_DRV_USE,0); - if (ctxt->events) - driver_free(ctxt->events); - } else { - events = driver_alloc(sizeof(ErlDrvEvent)*event_cnt); - EV_GET_UINT32(ev,&signo,&p,&q); - for (i = 0, j = 0; i < event_cnt || j < ctxt->event_cnt; ) { - - if (ctxt->events) - erl_drv_ose_event_fetch(ctxt->events[j],&tmp_signo,NULL,NULL); - - if (signo == tmp_signo) { - events[i++] = ctxt->events[j++]; - EV_GET_UINT32(ev,&signo,&p,&q); - } else if (signo < tmp_signo || !ctxt->events) { - /* New signal to select on */ - events[i] = erl_drv_ose_event_alloc(signo,(int)ctxt->spid, - resolve_signal, NULL); - driver_select(ctxt->port,events[i++],ERL_DRV_READ|ERL_DRV_USE,1); - EV_GET_UINT32(ev,&signo,&p,&q); - } else { - /* Remove old signal to select on */ - driver_select(ctxt->port,ctxt->events[j++],ERL_DRV_READ|ERL_DRV_USE,0); - } - } - if (ctxt->events) - driver_free(ctxt->events); - } - ctxt->events = events; - ctxt->event_cnt = event_cnt; - - { - ErlDrvTermData output[] = { - ERL_DRV_ATOM, a_ose_drv_reply, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_ATOM, a_ok, - ERL_DRV_TUPLE, 3}; - send_response(ctxt->port, output); - } - break; - } - - default: - { - DEBUGP("Warning: 'ose_signal_drv' unknown command '%d'\n", cmd); - break; - } - } -} - -/** - * Handler for when OSE signal arrives - **/ -static void ready_input(ErlDrvData driver_data, ErlDrvEvent event) -{ - driver_context_t *ctxt = (driver_context_t *)driver_data; - union SIGNAL *sig = erl_drv_ose_get_signal(event); - - while (sig != NULL) { - - switch(sig->signo) - { - /* Remote process is available */ - case ERTS_SIGNAL_OSE_DRV_HUNT: - { - const PROCESS spid = sender(&sig); - - if (remove_reference(ctxt,sig->async.ref)) { - DEBUGP_HUNT("0x%x: Got hunt from 0x%x -> %u (CANCELLED) (%u,%u)\n", - ctxt->spid,spid,sig->async.ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - /* Already removed by dehunt */ - } else { - ErlDrvTermData reply[] = { - ERL_DRV_ATOM, a_mailbox_up, - ERL_DRV_PORT, sig->async.port, - ERL_DRV_PORT, sig->async.port, - ERL_DRV_UINT, (ErlDrvUInt)sig->async.ref, - ERL_DRV_TUPLE, 2, - ERL_DRV_UINT, (ErlDrvUInt)spid, - ERL_DRV_TUPLE, 4}; - DEBUGP_HUNT("0x%x: Got hunt from 0x%x -> %u (%u,%u)\n", - ctxt->spid,spid,sig->async.ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - erl_drv_send_term(sig->async.port, sig->async.proc, reply, - sizeof(reply) / sizeof(reply[0])); - } - break; - } - - /* Remote process is down */ - case ERTS_SIGNAL_OSE_DRV_ATTACH: - { - PROCESS spid = sig->async.target; - - if (remove_reference(ctxt,sig->async.ref)) { - DEBUGP_ATTACH("0x%x: Got attach from 0x%x -> %u (CANCELLED) (%u,%u)\n", - ctxt->spid,spid,sig->async.ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - /* Already removed by detach */ - } else { - ErlDrvTermData reply[] = { - ERL_DRV_ATOM, a_mailbox_down, - ERL_DRV_PORT, sig->async.port, - ERL_DRV_PORT, sig->async.port, - ERL_DRV_UINT, sig->async.ref, - ERL_DRV_TUPLE, 2, - ERL_DRV_UINT, (ErlDrvUInt)spid, - ERL_DRV_TUPLE, 4}; - DEBUGP_ATTACH("0x%x: Got attach from 0x%x -> %u (%u,%u)\n", - ctxt->spid,spid,sig->async.ref, - ctxt->outstanding_refs_cnt, - ctxt->outstanding_refs_max); - erl_drv_send_term(sig->async.port, sig->async.proc, reply, - sizeof(reply) / sizeof(reply[0])); - } - break; - } - - /* Received user defined signal */ - default: - { - const PROCESS spid = sender(&sig); - const OSBUFSIZE size = sigsize(&sig) - sizeof(SIGSELECT); - const char *sig_data = ((char *)&sig->signo) + sizeof(SIGSELECT); - - ErlDrvTermData reply[] = { - ERL_DRV_ATOM, a_message, - ERL_DRV_PORT, driver_mk_port(ctxt->port), - ERL_DRV_UINT, (ErlDrvUInt)spid, - ERL_DRV_UINT, (ErlDrvUInt)ctxt->spid, - ERL_DRV_UINT, (ErlDrvUInt)sig->signo, - ERL_DRV_BUF2BINARY, (ErlDrvTermData)sig_data, (ErlDrvUInt)size, - ERL_DRV_TUPLE, 4, - ERL_DRV_TUPLE, 3}; - - DEBUGP_SEND("0x%x: Got 0x%u\r\n", spid, sig->signo); - - erl_drv_output_term(driver_mk_port(ctxt->port), reply, - sizeof(reply) / sizeof(reply[0])); - break; - } - } - - free_buf(&sig); - sig = erl_drv_ose_get_signal(event); - } -} - -/** - * Handler for 'port_control' - **/ -static ErlDrvSSizeT control(ErlDrvData driver_data, unsigned int cmd, - char *buf, ErlDrvSizeT len, - char **rbuf, ErlDrvSizeT rlen) -{ - driver_context_t *ctxt = (driver_context_t *)driver_data; - - switch(cmd) - { - case GET_SPID: - { - const PROCESS spid = ctxt->spid; - put_u32(spid, *rbuf); - return sizeof(PROCESS); - } - -#ifdef HAVE_OSE_SPI_H - case GET_NAME: - { - const PROCESS spid = get_u32(buf); - char *name = (char*)get_pid_info(spid,OSE_PI_NAME); - int n; - if (!name) { - *rbuf = NULL; - return 0; - } - - if (rlen < (n = strlen(name))) { - ErlDrvBinary *bin = driver_alloc_binary(n); - strncpy(bin->orig_bytes,name,n); - *rbuf = (char*)bin; - } else - strncpy(*rbuf,name,n); - free_buf((union SIGNAL**)&name); - - return n; - } -#endif - default: - { - /* Unknown command */ - return (ErlDrvSSizeT)ERL_DRV_ERROR_GENERAL; - break; - } - } -} - -static void stop_select(ErlDrvEvent event, void *reserved) -{ - erl_drv_ose_event_free(event); -} - -/** - * Setup the driver entry for the Erlang runtime - **/ -ErlDrvEntry ose_signal_driver_entry = { - .init = drv_init, - .start = drv_start, - .stop = drv_stop, - .outputv = outputv, - .ready_input = ready_input, - .driver_name = DRIVER_NAME, - .control = control, - .extended_marker = ERL_DRV_EXTENDED_MARKER, - .major_version = ERL_DRV_EXTENDED_MAJOR_VERSION, - .minor_version = ERL_DRV_EXTENDED_MINOR_VERSION, - .driver_flags = ERL_DRV_FLAG_USE_PORT_LOCKING, - .stop_select = stop_select -}; - diff --git a/erts/emulator/drivers/ose/ttsl_drv.c b/erts/emulator/drivers/ose/ttsl_drv.c deleted file mode 100644 index f759b47984..0000000000 --- a/erts/emulator/drivers/ose/ttsl_drv.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 1996-2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -/* - * Stub tty driver because group/user depend on this. - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include "erl_driver.h" - -static int ttysl_init(void); -static ErlDrvData ttysl_start(ErlDrvPort, char*); - -/* Define the driver table entry. */ -struct erl_drv_entry ttsl_driver_entry = { - ttysl_init, - ttysl_start, - NULL, - NULL, - NULL, - NULL, - "tty_sl", - NULL, - NULL, - NULL, - NULL, /* timeout */ - NULL, /* outputv */ - NULL, /* ready_async */ - NULL, /* flush */ - NULL, /* call */ - NULL, /* event */ - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - 0, /* ERL_DRV_FLAGs */ - NULL, - NULL, /* process_exit */ - NULL -}; - - -static int ttysl_init(void) -{ - return 0; -} - -static ErlDrvData ttysl_start(ErlDrvPort port, char* buf) -{ - return ERL_DRV_ERROR_GENERAL; -} diff --git a/erts/emulator/sys/common/erl_check_io.c b/erts/emulator/sys/common/erl_check_io.c index 105b129065..f87196d724 100644 --- a/erts/emulator/sys/common/erl_check_io.c +++ b/erts/emulator/sys/common/erl_check_io.c @@ -1337,11 +1337,7 @@ print_select_op(erts_dsprintf_buf_t *dsbufp, { Port *pp = erts_drvport2port(ix); erts_dsprintf(dsbufp, -#ifdef __OSE__ - "driver_select(%p, %d,%s%s%s%s | %d, %d) " -#else "driver_select(%p, %d,%s%s%s%s, %d) " -#endif "by ", ix, (int) GET_FD(fd), @@ -1861,25 +1857,6 @@ stale_drv_select(Eterm id, ErtsDrvEventState *state, int mode) #ifndef ERTS_SYS_CONTINOUS_FD_NUMBERS -#ifdef __OSE__ -static SafeHashValue drv_ev_state_hash(void *des) -{ - ErtsSysFdType fd = ((ErtsDrvEventState *) des)->fd; - /* We use hash on signo ^ id in order for steal to happen when the - same signo + fd is selected on by two different ports */ - SafeHashValue val = (SafeHashValue)(fd->signo ^ fd->id); - return val ^ (val >> 8); -} - -static int drv_ev_state_cmp(void *des1, void *des2) -{ - ErtsSysFdType fd1 = ((ErtsDrvEventState *) des1)->fd; - ErtsSysFdType fd2 = ((ErtsDrvEventState *) des2)->fd; - if (fd1->signo == fd2->signo && fd1->id == fd2->id) - return 0; - return 1; -} -#else /* !__OSE__ && !ERTS_SYS_CONTINOUS_FD_NUMBERS i.e. probably windows */ static SafeHashValue drv_ev_state_hash(void *des) { SafeHashValue val = (SafeHashValue) ((ErtsDrvEventState *) des)->fd; @@ -1891,7 +1868,6 @@ static int drv_ev_state_cmp(void *des1, void *des2) return ( ((ErtsDrvEventState *) des1)->fd == ((ErtsDrvEventState *) des2)->fd ? 0 : 1); } -#endif static void *drv_ev_state_alloc(void *des_tmpl) { diff --git a/erts/emulator/sys/common/erl_poll.h b/erts/emulator/sys/common/erl_poll.h index 19ce582154..6d8aef822e 100644 --- a/erts/emulator/sys/common/erl_poll.h +++ b/erts/emulator/sys/common/erl_poll.h @@ -93,7 +93,7 @@ # if defined(ERTS_USE_POLL) # undef ERTS_POLL_USE_POLL # define ERTS_POLL_USE_POLL 1 -# elif !defined(__WIN32__) && !defined(__OSE__) +# elif !defined(__WIN32__) # undef ERTS_POLL_USE_SELECT # define ERTS_POLL_USE_SELECT 1 # endif @@ -104,31 +104,13 @@ typedef Uint32 ErtsPollEvents; #undef ERTS_POLL_EV_E2N -#if defined(__WIN32__) || defined(__OSE__) /* --- win32 or ose -------- */ +#if defined(__WIN32__) /* --- win32 --------------------------------------- */ #define ERTS_POLL_EV_IN 1 #define ERTS_POLL_EV_OUT 2 #define ERTS_POLL_EV_ERR 4 #define ERTS_POLL_EV_NVAL 8 -#ifdef __OSE__ - -typedef struct ErtsPollOseMsgList_ { - struct ErtsPollOseMsgList_ *next; - union SIGNAL *data; -} ErtsPollOseMsgList; - -struct erts_sys_fd_type { - SIGSELECT signo; - ErlDrvOseEventId id; - ErtsPollOseMsgList *msgs; - ErlDrvOseEventId (*resolve_signal)(union SIGNAL *sig); - ethr_mutex mtx; - void *extra; -}; - -#endif - #elif ERTS_POLL_USE_EPOLL /* --- epoll ------------------------------- */ #include <sys/epoll.h> diff --git a/erts/emulator/sys/ose/beam.lmconf b/erts/emulator/sys/ose/beam.lmconf deleted file mode 100644 index 4ad46b01d9..0000000000 --- a/erts/emulator/sys/ose/beam.lmconf +++ /dev/null @@ -1,26 +0,0 @@ -OSE_LM_STACK_SIZES=256,512,1024,2048,4096,8192,16384,65536 -OSE_LM_SIGNAL_SIZES=31,63,127,255,1023,4095,16383,65535 -OSE_LM_POOL_SIZE=0x200000 -OSE_LM_MAIN_NAME=main -OSE_LM_MAIN_STACK_SIZE=0xF000 -OSE_LM_MAIN_PRIORITY=20 -## Has to be of a type that allows MAM -OSE_LM_PROGRAM_TYPE=APP_RAM -OSE_LM_DATA_INIT=YES -OSE_LM_BSS_INIT=YES -OSE_LM_EXEC_MODEL=SHARED -HEAP_MAX_SIZE=1000000000 -HEAP_SMALL_BUF_INIT_SIZE=20971520 -HEAP_LARGE_BUF_THRESHOLD=16000000 -HEAP_LOCK_TYPE=2 - -ERTS_DEFAULT_PRIO=24 -ERTS_SCHEDULER_PRIO=24 -ERTS_ASYNC_PRIO=22 -ERTS_AUX_PRIO=24 -ERTS_SYS_MSG_DISPATCHER_PRIO=21 - -# Setting the environment variable EFS_RESOLVE_TMO on the block to 0. -# This will eliminiate delays when trying to open files on not mounted -# volumes. -EFS_RESOLVE_TMO=0 diff --git a/erts/emulator/sys/ose/driver_int.h b/erts/emulator/sys/ose/driver_int.h deleted file mode 100644 index 4a5b7171d1..0000000000 --- a/erts/emulator/sys/ose/driver_int.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 1997-2009. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -/* - * System dependant driver declarations - */ - -#ifndef __DRIVER_INT_H__ -#define __DRIVER_INT_H__ - -#ifdef HAVE_SYS_UIO_H -#include <sys/types.h> -#include <sys/uio.h> - -typedef struct iovec SysIOVec; - -#else - -typedef struct { - char* iov_base; - int iov_len; -} SysIOVec; - -#endif - -#endif diff --git a/erts/emulator/sys/ose/erl_main.c b/erts/emulator/sys/ose/erl_main.c deleted file mode 100644 index 877e85f43a..0000000000 --- a/erts/emulator/sys/ose/erl_main.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2000-2009. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif -#include <stdlib.h> - -#include "sys.h" -#include "erl_vm.h" -#include "global.h" -#include "ose.h" - -int -main(int argc, char **argv) { - - (void)stdin;(void)stdout;(void)stderr; - - /* When starting using pm_create -c ARGV="-- -root ..", argv[0] is the first - part of ARGV and not the name of the executable. So we shuffle some - pointers here to make erl_start happy. */ - if (argv[0][0] == '-') { - int i; - char **tmp_argv = malloc(sizeof(char*)*(argc+1)); - for (i = 0; i < argc; i++) - tmp_argv[i+1] = argv[i]; - tmp_argv[0] = "beam"; - erl_start(argc+1,tmp_argv); - free(tmp_argv); - } else { - erl_start(argc,argv); - } - - stop(current_process()); - - return 0; -} diff --git a/erts/emulator/sys/ose/erl_ose_sys.h b/erts/emulator/sys/ose/erl_ose_sys.h deleted file mode 100644 index d0cd3180bf..0000000000 --- a/erts/emulator/sys/ose/erl_ose_sys.h +++ /dev/null @@ -1,356 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 1997-2011. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - * - * This file handles differences between different Unix systems. - * This should be the only place with conditional compilation - * depending on the type of OS. - */ - -#ifndef _ERL_OSE_SYS_H -#define _ERL_OSE_SYS_H - -#include "ose.h" -#undef NIL -#include "ramlog.h" -#include "erts.sig" - -#include "fcntl.h" -#include "math.h" -#include "stdio.h" -#include "stdlib.h" -#include "string.h" -#include "sys/param.h" -#include "sys/time.h" -#include "time.h" -#include "dirent.h" -#include "ethread.h" - -/* FIXME: configuration options */ -#define ERTS_SCHED_MIN_SPIN 1 -#define ERTS_SCHED_ONLY_POLL_SCHED_1 1 -#define ERTS_SCHED_FAIR 1 -#define NO_SYSCONF 1 -#define OPEN_MAX FOPEN_MAX - -#define MAP_ANON MAP_ANONYMOUS - -#ifndef HAVE_MMAP -# define HAVE_MMAP 0 -#endif - -#if HAVE_MMAP -# include "sys/mman.h" -#endif - -/* - * Min number of async threads - */ -#define ERTS_MIN_NO_OF_ASYNC_THREADS 1 - -/* - * Our own type of "FD's" - */ -#define ERTS_SYS_FD_TYPE struct erts_sys_fd_type* -#define NO_FSTAT_ON_SYS_FD_TYPE 1 /* They are signals, not files */ - -#include "sys/stat.h" - -/* FIXME mremap is not defined in OSE - POSIX issue */ -extern void *mremap (void *__addr, size_t __old_len, size_t __new_len, - int __flags, ...); - -/* FIXME: mremap constants */ -#define MREMAP_MAYMOVE 1 -#define MREMAP_FIXED 2 - -typedef void *GETENV_STATE; - -/* -** For the erl_timer_sup module. -*/ -#define HAVE_GETHRTIME - -typedef long long SysHrTime; -extern SysHrTime sys_gethrtime(void); - -void sys_init_hrtime(void); - -typedef time_t erts_time_t; - -typedef struct timeval SysTimeval; - -#define sys_gettimeofday(Arg) ((void) gettimeofday((Arg), NULL)) - -typedef struct { - clock_t tms_utime; - clock_t tms_stime; - clock_t tms_cutime; - clock_t tms_cstime; -} SysTimes; - -extern int erts_ticks_per_sec; - -#define SYS_CLK_TCK (erts_ticks_per_sec) - -extern clock_t sys_times(SysTimes *buffer); - -/* No use in having other resolutions than 1 Ms. */ -#define SYS_CLOCK_RESOLUTION 1 - -#define erts_isfinite finite - -#ifdef NO_FPE_SIGNALS - -#define erts_get_current_fp_exception() NULL -#ifdef ERTS_SMP -#define erts_thread_init_fp_exception() do{}while(0) -#endif -# define __ERTS_FP_CHECK_INIT(fpexnp) do {} while (0) -# define __ERTS_FP_ERROR(fpexnp, f, Action) if (!finite(f)) { Action; } else {} -# define __ERTS_FP_ERROR_THOROUGH(fpexnp, f, Action) __ERTS_FP_ERROR(fpexnp, f, Action) -# define __ERTS_SAVE_FP_EXCEPTION(fpexnp) -# define __ERTS_RESTORE_FP_EXCEPTION(fpexnp) - -#define erts_sys_block_fpe() 0 -#define erts_sys_unblock_fpe(x) do{}while(0) - -#else /* !NO_FPE_SIGNALS */ - -extern volatile unsigned long *erts_get_current_fp_exception(void); -#ifdef ERTS_SMP -extern void erts_thread_init_fp_exception(void); -#endif -# if (defined(__i386__) || defined(__x86_64__)) && defined(__GNUC__) -# define erts_fwait(fpexnp,f) \ - __asm__ __volatile__("fwait" : "=m"(*(fpexnp)) : "m"(f)) -# elif (defined(__powerpc__) || defined(__ppc__)) && defined(__GNUC__) -# define erts_fwait(fpexnp,f) \ - __asm__ __volatile__("" : "=m"(*(fpexnp)) : "fm"(f)) -# elif defined(__sparc__) && defined(__linux__) && defined(__GNUC__) -# define erts_fwait(fpexnp,f) \ - __asm__ __volatile__("" : "=m"(*(fpexnp)) : "em"(f)) -# else -# define erts_fwait(fpexnp,f) \ - __asm__ __volatile__("" : "=m"(*(fpexnp)) : "g"(f)) -# endif -# if (defined(__i386__) || defined(__x86_64__)) && defined(__GNUC__) - extern void erts_restore_fpu(void); -# else -# define erts_restore_fpu() /*empty*/ -# endif -# if (!defined(__GNUC__) || \ - (__GNUC__ < 2) || \ - (__GNUC__ == 2 && __GNUC_MINOR < 96)) && \ - !defined(__builtin_expect) -# define __builtin_expect(x, expected_value) (x) -# endif -static __inline__ int erts_check_fpe(volatile unsigned long *fp_exception, double f) -{ - erts_fwait(fp_exception, f); - if (__builtin_expect(*fp_exception == 0, 1)) - return 0; - *fp_exception = 0; - erts_restore_fpu(); - return 1; -} -# undef erts_fwait -# undef erts_restore_fpu -extern void erts_fp_check_init_error(volatile unsigned long *fp_exception); -static __inline__ void __ERTS_FP_CHECK_INIT(volatile unsigned long *fp_exception) -{ - if (__builtin_expect(*fp_exception == 0, 1)) - return; - erts_fp_check_init_error(fp_exception); -} -# define __ERTS_FP_ERROR(fpexnp, f, Action) do { if (erts_check_fpe((fpexnp),(f))) { Action; } } while (0) -# define __ERTS_SAVE_FP_EXCEPTION(fpexnp) unsigned long old_erl_fp_exception = *(fpexnp) -# define __ERTS_RESTORE_FP_EXCEPTION(fpexnp) \ - do { *(fpexnp) = old_erl_fp_exception; } while (0) - /* This is for library calls where we don't trust the external - code to always throw floating-point exceptions on errors. */ -static __inline__ int erts_check_fpe_thorough(volatile unsigned long *fp_exception, double f) -{ - return erts_check_fpe(fp_exception, f) || !finite(f); -} -# define __ERTS_FP_ERROR_THOROUGH(fpexnp, f, Action) \ - do { if (erts_check_fpe_thorough((fpexnp),(f))) { Action; } } while (0) - -int erts_sys_block_fpe(void); -void erts_sys_unblock_fpe(int); - -#endif /* !NO_FPE_SIGNALS */ - -#define ERTS_FP_CHECK_INIT(p) __ERTS_FP_CHECK_INIT(&(p)->fp_exception) -#define ERTS_FP_ERROR(p, f, A) __ERTS_FP_ERROR(&(p)->fp_exception, f, A) -#define ERTS_FP_ERROR_THOROUGH(p, f, A) __ERTS_FP_ERROR_THOROUGH(&(p)->fp_exception, f, A) - -/* FIXME: force HAVE_GETPAGESIZE and stub getpagesize */ -#ifndef HAVE_GETPAGESIZE -#define HAVE_GETPAGESIZE 1 -#endif - -extern int getpagesize(void); - -#ifndef HZ -#define HZ 60 -#endif - -/* OSE5 doesn't provide limits.h so a number of macros should be - * added manually */ - -#ifndef CHAR_BIT -#define CHAR_BIT 8 -#endif - -/* Minimum and maximum values a `signed int' can hold. */ -#ifndef INT_MAX -#define INT_MAX 2147483647 -#endif - -#ifndef INT_MIN -#define INT_MIN (-INT_MAX - 1) -#endif - -#ifndef UINT_MAX -# define UINT_MAX 4294967295U -#endif - -/* -static void erts_ose_sys_send(union SIGNAL **signal,PROCESS dst, - char* file,int line) { - SIGSELECT **ziggy = (SIGSELECT**)signal; - printf("%s:%d 0x%x Send signal 0x%x(0x%x) to 0x%x\r\n", - file,line,current_process(),ziggy[0][0],*ziggy,dst); - send(signal,dst); -} -#define send(signal,dst) erts_ose_sys_send(signal,dst,__FILE__,__LINE__) - -static void erts_ose_sys_send_w_sender(union SIGNAL **signal, - PROCESS sender,PROCESS dst, - char* file,int line) { - SIGSELECT **ziggy = (SIGSELECT**)signal; - printf("%s:%d 0x%x Send signal 0x%x(0x%x) to 0x%x as 0x%x\r\n", - file,line,current_process(),ziggy[0][0],*ziggy,dst,sender); - send_w_sender(signal,sender,dst); -} -#define send_w_sender(signal,sender,dst) \ - erts_ose_sys_send_w_sender(signal,sender,dst,__FILE__,__LINE__) - - -static union SIGNAL *erts_ose_sys_receive(SIGSELECT *sigsel, - char *file, - int line) { - SIGSELECT *sig; - int i; - - printf("%s:%d 0x%x receive({%d,",file,line,current_process(),sigsel[0]); - for (i = 1; i < sigsel[0]; i++) - printf("0x%x, ",sigsel[i]); - if (sigsel[0] != 0) - printf("0x%x",sigsel[i]); - printf("})\n"); - sig = (SIGSELECT*)receive(sigsel); - printf("%s:%d 0x%x got 0x%x from 0x%x\n",file,line,current_process(), - *sig,sender((union SIGNAL**)(&sig))); - return (union SIGNAL*)sig; -} -#define receive(SIGSEL) erts_ose_sys_receive(SIGSEL,__FILE__,__LINE__) - -static union SIGNAL *erts_ose_sys_receive_w_tmo(OSTIME tmo,SIGSELECT *sigsel, - char *file,int line) { - SIGSELECT *sig; - int i; - if (tmo == 0) { - sig = (SIGSELECT*)receive_w_tmo(tmo,sigsel); - if (sig != NULL) { - printf("%s:%d 0x%x receive_w_tmo(0,{%d,",file,line,current_process(), - sigsel[0]); - for (i = 1; i < sigsel[0]; i++) - printf("0x%x, ",sigsel[i]); - if (sigsel[0] != 0) - printf("0x%x",sigsel[i]); - printf("})\n"); - printf("%s:%d 0x%x got 0x%x from 0x%x\n",file,line,current_process(), - *sig,sender((union SIGNAL**)(&sig))); - } - } else { - printf("%s:%d 0x%x receive_w_tmo(%u,{%d,",file,line,current_process(),tmo, - sigsel[0]); - for (i = 1; i < sigsel[0]; i++) - printf("0x%x, ",sigsel[i]); - if (sigsel[0] != 0) - printf("0x%x",sigsel[i]); - printf("})\n"); - sig = (SIGSELECT*)receive_w_tmo(tmo,sigsel); - printf("%s:%d 0x%x got ",file,line,current_process()); - if (sig == NULL) - printf("TIMEOUT\n"); - else - printf("0x%x from 0x%x\n",*sig,sender((union SIGNAL**)(&sig))); - } - - return (union SIGNAL*)sig; -} - -#define receive_w_tmo(tmo,sigsel) erts_ose_sys_receive_w_tmo(tmo,sigsel, \ - __FILE__,__LINE__) - -static union SIGNAL *erts_ose_sys_receive_fsem(OSTIME tmo,SIGSELECT *sigsel, - OSFSEMVAL fsem, - char *file,int line) { - SIGSELECT *sig; - int i; - if (tmo == 0) { - sig = (SIGSELECT*)receive_fsem(tmo,sigsel,fsem); - if (sig != NULL && sig != OS_RCV_FSEM) { - printf("%s:%d 0x%x receive_fsem(0,{%d,",file,line,current_process(), - sigsel[0]); - for (i = 1; i < sigsel[0]; i++) - printf("0x%x, ",sigsel[i]); - if (sigsel[0] != 0) - printf("0x%x",sigsel[i]); - printf("},%d)\n",fsem); - printf("%s:%d 0x%x got 0x%x from 0x%x\n",file,line,current_process(), - *sig,sender((union SIGNAL**)(&sig))); - } - } else { - printf("%s:%d 0x%x receive_fsem(%u,{%d,",file,line,current_process(),tmo, - sigsel[0]); - for (i = 1; i < sigsel[0]; i++) - printf("0x%x, ",sigsel[i]); - if (sigsel[0] != 0) - printf("0x%x",sigsel[i]); - printf("},%d)\n",fsem); - sig = (SIGSELECT*)receive_fsem(tmo,sigsel,fsem); - printf("%s:%d 0x%x got ",file,line,current_process()); - if (sig == NULL) - printf("TIMEOUT\n"); - else if (sig == OS_RCV_FSEM) - printf("FSEM\n"); - else - printf("0x%x from 0x%x\n",*sig,sender((union SIGNAL**)(&sig))); - } - - return (union SIGNAL*)sig; -} - -#define receive_fsem(tmo,sigsel,fsem) \ - erts_ose_sys_receive_fsem(tmo,sigsel,fsem,__FILE__,__LINE__) -*/ -#endif /* _ERL_OSE_SYS_H */ diff --git a/erts/emulator/sys/ose/erl_ose_sys_ddll.c b/erts/emulator/sys/ose/erl_ose_sys_ddll.c deleted file mode 100644 index 5051f7fcc1..0000000000 --- a/erts/emulator/sys/ose/erl_ose_sys_ddll.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2006-2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -/* - * Interface functions to the dynamic linker using dl* functions. - * (No support in OSE, we use static linkage instead) - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include "sys.h" -#include "erl_vm.h" -#include "global.h" - - -void erl_sys_ddll_init(void) { -} - -/* - * Open a shared object - */ -int erts_sys_ddll_open(const char *full_name, void **handle, ErtsSysDdllError* err) -{ - return ERL_DE_ERROR_NO_DDLL_FUNCTIONALITY; -} - -int erts_sys_ddll_open_noext(char *dlname, void **handle, ErtsSysDdllError* err) -{ - return ERL_DE_ERROR_NO_DDLL_FUNCTIONALITY; -} - -/* - * Find a symbol in the shared object - */ -int erts_sys_ddll_sym2(void *handle, const char *func_name, void **function, - ErtsSysDdllError* err) -{ - return ERL_DE_ERROR_NO_DDLL_FUNCTIONALITY; -} - -/* XXX:PaN These two will be changed with new driver interface! */ - -/* - * Load the driver init function, might appear under different names depending on object arch... - */ - -int erts_sys_ddll_load_driver_init(void *handle, void **function) -{ - void *fn; - int res; - if ((res = erts_sys_ddll_sym2(handle, "driver_init", &fn, NULL)) != ERL_DE_NO_ERROR) { - res = erts_sys_ddll_sym2(handle, "_driver_init", &fn, NULL); - } - if (res == ERL_DE_NO_ERROR) { - *function = fn; - } - return res; -} - -int erts_sys_ddll_load_nif_init(void *handle, void **function, ErtsSysDdllError* err) -{ - void *fn; - int res; - if ((res = erts_sys_ddll_sym2(handle, "nif_init", &fn, err)) != ERL_DE_NO_ERROR) { - res = erts_sys_ddll_sym2(handle, "_nif_init", &fn, err); - } - if (res == ERL_DE_NO_ERROR) { - *function = fn; - } - return res; -} - -/* - * Call the driver_init function, whatever it's really called, simple on unix... -*/ -void *erts_sys_ddll_call_init(void *function) { - void *(*initfn)(void) = function; - return (*initfn)(); -} -void *erts_sys_ddll_call_nif_init(void *function) { - return erts_sys_ddll_call_init(function); -} - - - -/* - * Close a chared object - */ -int erts_sys_ddll_close2(void *handle, ErtsSysDdllError* err) -{ - return ERL_DE_ERROR_NO_DDLL_FUNCTIONALITY; -} - - -/* - * Return string that describes the (current) error - */ -char *erts_sys_ddll_error(int code) -{ - return "Unspecified error"; -} - -void erts_sys_ddll_free_error(ErtsSysDdllError* err) -{ - if (err->str != NULL) { - erts_free(ERTS_ALC_T_DDLL_TMP_BUF, err->str); - } -} diff --git a/erts/emulator/sys/ose/erl_poll.c b/erts/emulator/sys/ose/erl_poll.c deleted file mode 100644 index 5cee582a00..0000000000 --- a/erts/emulator/sys/ose/erl_poll.c +++ /dev/null @@ -1,818 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2006-2012. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -/* - * Description: Poll interface suitable for ERTS on OSE with or without - * SMP support. - * - * The interface is currently implemented using: - * - receive + receive_fsem - * - * Author: Lukas Larsson - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include "erl_thr_progress.h" -#include "erl_driver.h" -#include "erl_alloc.h" -#include "erl_poll.h" - -#define NOFILE 4096 - -/* - * Some debug macros - */ - -/* #define HARDDEBUG -#define HARDTRACE*/ -#ifdef HARDDEBUG -#ifdef HARDTRACE -#define HARDTRACEF(X, ...) { fprintf(stderr, X, __VA_ARGS__); fprintf(stderr,"\r\n"); } -#else -#define HARDTRACEF(...) -#endif - -#else -#define HARDTRACEF(X,...) -#define HARDDEBUGF(...) -#endif - -#if 0 -#define ERTS_POLL_DEBUG_PRINT -#endif - -#if defined(DEBUG) && 0 -#define HARD_DEBUG -#endif - -# define SEL_ALLOC erts_alloc -# define SEL_REALLOC realloc_wrap -# define SEL_FREE erts_free - -#ifdef ERTS_SMP - -#define ERTS_POLLSET_LOCK(PS) \ - erts_smp_mtx_lock(&(PS)->mtx) -#define ERTS_POLLSET_UNLOCK(PS) \ - erts_smp_mtx_unlock(&(PS)->mtx) - -#else - -#define ERTS_POLLSET_LOCK(PS) -#define ERTS_POLLSET_UNLOCK(PS) - -#endif - -/* - * --- Data types ------------------------------------------------------------ - */ - -union SIGNAL { - SIGSELECT sig_no; -}; - -typedef struct erts_sigsel_item_ ErtsSigSelItem; - -struct erts_sigsel_item_ { - ErtsSigSelItem *next; - ErtsSysFdType fd; - ErtsPollEvents events; -}; - -typedef struct erts_sigsel_info_ ErtsSigSelInfo; - -struct erts_sigsel_info_ { - ErtsSigSelInfo *next; - SIGSELECT signo; - ErlDrvOseEventId (*decode)(union SIGNAL* sig); - ErtsSigSelItem *fds; -}; - -struct ErtsPollSet_ { - SIGSELECT *sigs; - ErtsSigSelInfo *info; - Uint sig_count; - Uint item_count; - PROCESS interrupt; - erts_atomic32_t wakeup_state; - erts_atomic64_t timeout_time; -#ifdef ERTS_SMP - erts_smp_mtx_t mtx; -#endif -}; - -static int max_fds = -1; - -static ERTS_INLINE void -init_timeout_time(ErtsPollSet ps) -{ - erts_atomic64_init_nob(&ps->timeout_time, - (erts_aint64_t) ERTS_MONOTONIC_TIME_MAX); -} - -static ERTS_INLINE void -set_timeout_time(ErtsPollSet ps, ErtsMonotonicTime time) -{ - erts_atomic64_set_relb(&ps->timeout_time, - (erts_aint64_t) time); -} - -static ERTS_INLINE ErtsMonotonicTime -get_timeout_time(ErtsPollSet ps) -{ - return (ErtsMonotonicTime) erts_atomic64_read_acqb(&ps->timeout_time); -} - -#define ERTS_POLL_NOT_WOKEN ((erts_aint32_t) (1 << 0)) -#define ERTS_POLL_WOKEN_INTR ((erts_aint32_t) (1 << 1)) -#define ERTS_POLL_WOKEN_TIMEDOUT ((erts_aint32_t) (1 << 2)) -#define ERTS_POLL_WOKEN_IO_READY ((erts_aint32_t) (1 << 3)) -#define ERTS_POLL_SLEEPING ((erts_aint32_t) (1 << 4)) - -/* signal list prototypes */ -static ErtsSigSelInfo *get_sigsel_info(ErtsPollSet ps, SIGSELECT signo); -static ErtsSigSelItem *get_sigsel_item(ErtsPollSet ps, ErtsSysFdType fd); -static ErtsSigSelInfo *add_sigsel_info(ErtsPollSet ps, ErtsSysFdType fd, - ErlDrvOseEventId (*decode)(union SIGNAL* sig)); -static ErtsSigSelItem *add_sigsel_item(ErtsPollSet ps, ErtsSysFdType fd, - ErlDrvOseEventId (*decode)(union SIGNAL* sig)); -static int del_sigsel_info(ErtsPollSet ps, ErtsSigSelInfo *info); -static int del_sigsel_item(ErtsPollSet ps, ErtsSigSelItem *item); -static int update_sigsel(ErtsPollSet ps); - -static ErtsSigSelInfo * -get_sigsel_info(ErtsPollSet ps, SIGSELECT signo) { - ErtsSigSelInfo *curr = ps->info; - while (curr != NULL) { - if (curr->signo == signo) - return curr; - curr = curr->next; - } - return NULL; -} - -static ErtsSigSelItem * -get_sigsel_item(ErtsPollSet ps, ErtsSysFdType fd) { - ErtsSigSelInfo *info = get_sigsel_info(ps,fd->signo); - ErtsSigSelItem *curr; - - if (info == NULL) - return NULL; - - curr = info->fds; - - while (curr != NULL) { - if (curr->fd->id == fd->id) { - ASSERT(curr->fd->signo == fd->signo); - return curr; - } - curr = curr->next; - } - return NULL; -} - -static ErtsSigSelInfo * -add_sigsel_info(ErtsPollSet ps, ErtsSysFdType fd, - ErlDrvOseEventId (*decode)(union SIGNAL* sig)) { - ErtsSigSelInfo *info = SEL_ALLOC(ERTS_ALC_T_POLLSET, - sizeof(ErtsSigSelInfo)); - info->next = ps->info; - info->fds = NULL; - info->signo = fd->signo; - info->decode = decode; - ps->info = info; - ps->sig_count++; - return info; -} - -static ErtsSigSelItem * -add_sigsel_item(ErtsPollSet ps, ErtsSysFdType fd, - ErlDrvOseEventId (*decode)(union SIGNAL* sig)) { - ErtsSigSelInfo *info = get_sigsel_info(ps,fd->signo); - ErtsSigSelItem *item = SEL_ALLOC(ERTS_ALC_T_POLLSET, - sizeof(ErtsSigSelItem)); - if (info == NULL) - info = add_sigsel_info(ps, fd, decode); - if (info->decode != decode) { - erts_dsprintf_buf_t *dsbufp = erts_create_logger_dsbuf(); - erts_dsprintf(dsbufp, "erts_poll_control() inconsistency: multiple resolve_signal functions for same signal (%d)\n", - fd->signo); - erts_send_error_to_logger_nogl(dsbufp); - } - ASSERT(info->decode == decode); - item->next = info->fds; - item->fd = fd; - item->events = 0; - info->fds = item; - ps->item_count++; - return item; -} - -static int del_sigsel_info(ErtsPollSet ps, ErtsSigSelInfo *info) { - ErtsSigSelInfo *curr, *prev; - - if (ps->info == info) { - ps->info = ps->info->next; - } else { - curr = ps->info->next; - prev = ps->info; - - while (curr != info) { - if (curr == NULL) - return 1; - prev = curr; - curr = curr->next; - } - prev->next = curr->next; - } - - ps->sig_count--; - SEL_FREE(ERTS_ALC_T_POLLSET, info); - return 0; -} - -static int del_sigsel_item(ErtsPollSet ps, ErtsSigSelItem *item) { - ErtsSigSelInfo *info = get_sigsel_info(ps,item->fd->signo); - ErtsSigSelItem *curr, *prev; - - ps->item_count--; - ASSERT(ps->item_count >= 0); - - if (info->fds == item) { - info->fds = info->fds->next; - SEL_FREE(ERTS_ALC_T_POLLSET,item); - if (info->fds == NULL) - return del_sigsel_info(ps,info); - return 0; - } - - curr = info->fds->next; - prev = info->fds; - - while (curr != item) { - if (curr == NULL) { - /* We did not find an item to delete so we have to - * increment item count again. - */ - ps->item_count++; - return 1; - } - prev = curr; - curr = curr->next; - } - prev->next = curr->next; - SEL_FREE(ERTS_ALC_T_POLLSET,item); - return 0; -} - -#ifdef ERTS_SMP - -static void update_redir_tables(ErtsPollSet ps) { - struct OS_redir_entry *redir_table; - PROCESS sched_1 = ERTS_SCHEDULER_IX(0)->tid.id; - int i; - redir_table = SEL_ALLOC(ERTS_ALC_T_POLLSET, - sizeof(struct OS_redir_entry)*(ps->sig_count+1)); - - redir_table[0].sig = ps->sig_count+1; - redir_table[0].pid = 0; - - for (i = 1; i < ps->sig_count+1; i++) { - redir_table[i].sig = ps->sigs[i]; - redir_table[i].pid = sched_1; - } - - for (i = 1; i < erts_no_schedulers; i++) { - ErtsSchedulerData *esdp = ERTS_SCHEDULER_IX(i); - set_redirection(esdp->tid.id,redir_table); - } - - SEL_FREE(ERTS_ALC_T_POLLSET,redir_table); -} - -#endif - -static int update_sigsel(ErtsPollSet ps) { - ErtsSigSelInfo *info = ps->info; - - int i; - - if (ps->sigs != NULL) - SEL_FREE(ERTS_ALC_T_POLLSET,ps->sigs); - - if (ps->sig_count == 0) { - /* If there are no signals we place a non-valid signal to make sure that - * we do not trigger on a any unrelated signals which are sent to the - * process. - */ - ps->sigs = SEL_ALLOC(ERTS_ALC_T_POLLSET,sizeof(SIGSELECT)*(2)); - ps->sigs[0] = 1; - ps->sigs[1] = ERTS_SIGNAL_INVALID; - return 0; - } - - ps->sigs = SEL_ALLOC(ERTS_ALC_T_POLLSET,sizeof(SIGSELECT)*(ps->sig_count+1)); - ps->sigs[0] = ps->sig_count; - - for (i = 1; info != NULL; i++, info = info->next) - ps->sigs[i] = info->signo; - -#ifdef ERTS_SMP - update_redir_tables(ps); -#endif - - return 0; -} - -static ERTS_INLINE void -wake_poller(ErtsPollSet ps) -{ - erts_aint32_t wakeup_state; - - ERTS_THR_MEMORY_BARRIER; - wakeup_state = erts_atomic32_read_nob(&ps->wakeup_state); - while (wakeup_state != ERTS_POLL_WOKEN_IO_READY - && wakeup_state != ERTS_POLL_WOKEN_INTR) { - erts_aint32_t act = erts_atomic32_cmpxchg_nob(&ps->wakeup_state, - ERTS_POLL_WOKEN_INTR, - wakeup_state); - if (act == wakeup_state) { - wakeup_state = act; - break; - } - wakeup_state = act; - } - if (wakeup_state == ERTS_POLL_SLEEPING) { - /* - * Since we don't know the internals of signal_fsem() we issue - * a memory barrier as a safety precaution ensuring that - * the store we just made to wakeup_state wont be reordered - * with loads in signal_fsem(). - */ - ERTS_THR_MEMORY_BARRIER; - signal_fsem(ps->interrupt); - } -} - -static ERTS_INLINE void -reset_interrupt(ErtsPollSet ps) -{ - /* We need to keep io-ready if set */ - erts_aint32_t wakeup_state = erts_atomic32_read_nob(&ps->wakeup_state); - while (wakeup_state != ERTS_POLL_NOT_WOKEN && - wakeup_state != ERTS_POLL_SLEEPING) { - erts_aint32_t act = erts_atomic32_cmpxchg_nob(&ps->wakeup_state, - ERTS_POLL_NOT_WOKEN, - wakeup_state); - if (wakeup_state == act) - break; - wakeup_state = act; - } - ERTS_THR_MEMORY_BARRIER; -} - -static ERTS_INLINE void -set_interrupt(ErtsPollSet ps) -{ - wake_poller(ps); -} - -void erts_poll_interrupt(ErtsPollSet ps,int set) { - HARDTRACEF("erts_poll_interrupt called!\n"); - - if (!set) - reset_interrupt(ps); - else - set_interrupt(ps); - -} - -void erts_poll_interrupt_timed(ErtsPollSet ps, - int set, - ErtsTimeoutTime timeout_time) { - HARDTRACEF("erts_poll_interrupt_timed called!\n"); - - if (!set) - reset_interrupt(ps); - else if (get_timeout_time(ps) > timeout_time) - set_interrupt(ps); -} - -ErtsPollEvents erts_poll_control(ErtsPollSet ps, ErtsSysFdType fd, - ErtsPollEvents pe, int on, int* do_wake) { - ErtsSigSelItem *curr; - ErtsPollEvents new_events; - int old_sig_count; - - HARDTRACEF( - "%ux: In erts_poll_control, fd = %d, pe = %d, on = %d, *do_wake = %d, curr = 0x%xu", - ps, fd, pe, on, do_wake, curr); - - ERTS_POLLSET_LOCK(ps); - - if (on && (pe & ERTS_POLL_EV_IN) && (pe & ERTS_POLL_EV_OUT)) { - /* Check to make sure both in and out are not used at the same time */ - new_events = ERTS_POLL_EV_NVAL; - goto done; - } - - curr = get_sigsel_item(ps, fd); - old_sig_count = ps->sig_count; - - if (curr == NULL && on) { - curr = add_sigsel_item(ps, fd, fd->resolve_signal); - } else if (curr == NULL && !on) { - new_events = ERTS_POLL_EV_NVAL; - goto done; - } - - new_events = curr->events; - - if (pe == 0) { - *do_wake = 0; - goto done; - } - - if (on) { - new_events |= pe; - curr->events = new_events; - } else { - new_events &= ~pe; - curr->events = new_events; - if (new_events == 0 && del_sigsel_item(ps, curr)) { - new_events = ERTS_POLL_EV_NVAL; - goto done; - } - } - - if (ps->sig_count != old_sig_count) { - if (update_sigsel(ps)) - new_events = ERTS_POLL_EV_NVAL; - } -done: - ERTS_POLLSET_UNLOCK(ps); - HARDTRACEF("%ux: Out erts_poll_control", ps); - return new_events; -} - -int erts_poll_wait(ErtsPollSet ps, - ErtsPollResFd pr[], - int *len, - ErtsMonotonicTime timeout_time) -{ - int res = ETIMEDOUT, no_fds, currid = 0; - OSTIME timeout; - union SIGNAL *sig; - ErtsMonotonicTime current_time, diff_time, timeout; - // HARDTRACEF("%ux: In erts_poll_wait",ps); - if (ps->interrupt == (PROCESS)0) - ps->interrupt = current_process(); - - ASSERT(current_process() == ps->interrupt); - ASSERT(get_fsem(current_process()) == 0); - ASSERT(erts_atomic32_read_nob(&ps->wakeup_state) & - (ERTS_POLL_NOT_WOKEN | ERTS_POLL_WOKEN_INTR)); - /* Max no of spots avable in pr */ - no_fds = *len; - - *len = 0; - - /* erts_printf("Entering erts_poll_wait(), timeout_time=%bps\n", - timeout_time); */ - - if (timeout_time == ERTS_POLL_NO_TIMEOUT) { - no_timeout: - timeout = (OSTIME) 0; - save_timeout_time = ERTS_MONOTONIC_TIME_MIN; - } - else { - ErtsMonotonicTime current_time, diff_time; - current_time = erts_get_monotonic_time(NULL); - diff_time = timeout_time - current_time; - if (diff_time <= 0) - goto no_timeout; - diff_time = (ERTS_MONOTONIC_TO_MSEC(diff_time - 1) + 1); - if (diff_time > INT_MAX) - diff_time = INT_MAX; - timeout = (OSTIME) diff_time; - save_timeout_time = current_time; - save_timeout_time += ERTS_MSEC_TO_MONOTONIC(diff_time); - } - - set_timeout_time(ps, save_timeout_time); - - while (currid < no_fds) { - if (timeout > 0) { - erts_aint32_t act = erts_atomic32_cmpxchg_nob(&ps->wakeup_state, - ERTS_POLL_SLEEPING, - ERTS_POLL_NOT_WOKEN); - if (act == ERTS_POLL_NOT_WOKEN) { -#ifdef ERTS_SMP - erts_thr_progress_prepare_wait(NULL); -#endif - sig = receive_fsem(timeout, ps->sigs, 1); -#ifdef ERTS_SMP - erts_thr_progress_finalize_wait(NULL); -#endif - } else { - ASSERT(act == ERTS_POLL_WOKEN_INTR); - sig = OS_RCV_FSEM; - } - } else - sig = receive_w_tmo(0, ps->sigs); - - if (sig == NULL) { - if (timeout > 0) { - erts_aint32_t act = erts_atomic32_cmpxchg_nob(&ps->wakeup_state, - ERTS_POLL_WOKEN_TIMEDOUT, - ERTS_POLL_SLEEPING); - if (act == ERTS_POLL_WOKEN_INTR) - /* Restore fsem as it was signaled but we got a timeout */ - wait_fsem(1); - } else - erts_atomic32_cmpxchg_nob(&ps->wakeup_state, - ERTS_POLL_WOKEN_TIMEDOUT, - ERTS_POLL_NOT_WOKEN); - break; - } else if (sig == OS_RCV_FSEM) { - ASSERT(erts_atomic32_read_nob(&ps->wakeup_state) == ERTS_POLL_WOKEN_INTR); - break; - } - { - ErtsSigSelInfo *info = get_sigsel_info(ps, sig->sig_no); - struct erts_sys_fd_type fd = { sig->sig_no, info->decode(sig) }; - ErtsSigSelItem *item = get_sigsel_item(ps, &fd); - - ASSERT(sig); - if (currid == 0 && timeout > 0) { - erts_aint32_t act = erts_atomic32_cmpxchg_nob(&ps->wakeup_state, - ERTS_POLL_WOKEN_IO_READY, - ERTS_POLL_SLEEPING); - if (act == ERTS_POLL_WOKEN_INTR) { - /* Restore fsem as it was signaled but we got a msg */ - wait_fsem(1); - act = erts_atomic32_cmpxchg_nob(&ps->wakeup_state, - ERTS_POLL_WOKEN_IO_READY, - ERTS_POLL_WOKEN_INTR); - } - } else if (currid == 0) { - erts_atomic32_set_nob(&ps->wakeup_state, - ERTS_POLL_WOKEN_IO_READY); - } - - if (item == NULL) { - erts_dsprintf_buf_t *dsbufp = erts_create_logger_dsbuf(); - erts_dsprintf( - dsbufp, - "erts_poll_wait() failed: found unkown signal id %d (signo %u) " - "(curr_proc 0x%x)\n", - fd.id, fd.signo, current_process()); - erts_send_error_to_logger_nogl(dsbufp); - timeout = 0; - /* Under normal circumstances the signal is deallocated by the - * driver that issued the select operation. But in this case - * there's no driver waiting for such signal so we have to - * deallocate it here */ - if (sig) - free_buf(&sig); - } else { - int i; - struct erts_sys_fd_type *fd = NULL; - ErtsPollOseMsgList *tl,*new; - - /* Check if this fd has already been triggered by a previous signal */ - for (i = 0; i < currid;i++) { - if (pr[i].fd == item->fd) { - fd = pr[i].fd; - pr[i].events |= item->events; - break; - } - } - - /* First time this fd is triggered */ - if (fd == NULL) { - pr[currid].fd = item->fd; - pr[currid].events = item->events; - fd = item->fd; - timeout = 0; - currid++; - } - - /* Insert new signal in approriate list */ - new = erts_alloc(ERTS_ALC_T_FD_SIG_LIST,sizeof(ErtsPollOseMsgList)); - new->next = NULL; - new->data = sig; - - ethr_mutex_lock(&fd->mtx); - tl = fd->msgs; - - if (tl == NULL) { - fd->msgs = new; - } else { - while (tl->next != NULL) - tl = tl->next; - tl->next = new; - } - ethr_mutex_unlock(&fd->mtx); - } - - } - } - - { - erts_aint32_t wakeup_state = erts_atomic32_read_nob(&ps->wakeup_state); - - switch (wakeup_state) { - case ERTS_POLL_WOKEN_IO_READY: - res = 0; - break; - case ERTS_POLL_WOKEN_INTR: - res = EINTR; - break; - case ERTS_POLL_WOKEN_TIMEDOUT: - res = ETIMEDOUT; - break; - case ERTS_POLL_NOT_WOKEN: - /* This happens when we get an invalid signal only */ - res = EINVAL; - break; - default: - res = 0; - erl_exit(ERTS_ABORT_EXIT, - "%s:%d: Internal error: Invalid wakeup_state=%d\n", - __FILE__, __LINE__, (int) wakeup_state); - } - } - - erts_atomic32_set_nob(&ps->wakeup_state, ERTS_POLL_NOT_WOKEN); - set_timeout_time(ps, ERTS_MONOTONIC_TIME_MAX); - - *len = currid; - - // HARDTRACEF("%ux: Out erts_poll_wait",ps); - return res; -} - -int erts_poll_max_fds(void) -{ - - HARDTRACEF("In/Out erts_poll_max_fds -> %d",max_fds); - return max_fds; -} - -void erts_poll_info(ErtsPollSet ps, - ErtsPollInfo *pip) -{ - Uint size = 0; - Uint num_events = 0; - - size += sizeof(struct ErtsPollSet_); - size += sizeof(ErtsSigSelInfo)*ps->sig_count; - size += sizeof(ErtsSigSelItem)*ps->item_count; - size += sizeof(SIGSELECT)*(ps->sig_count+1); - - pip->primary = "receive_fsem"; - - pip->fallback = NULL; - - pip->kernel_poll = NULL; - - pip->memory_size = size; - - pip->poll_set_size = num_events; - - pip->fallback_poll_set_size = 0; - - pip->lazy_updates = 0; - - pip->pending_updates = 0; - - pip->batch_updates = 0; - - pip->concurrent_updates = 0; - - - pip->max_fds = erts_poll_max_fds(); - HARDTRACEF("%ux: Out erts_poll_info",ps); - -} - -ErtsPollSet erts_poll_create_pollset(void) -{ - ErtsPollSet ps = SEL_ALLOC(ERTS_ALC_T_POLLSET, - sizeof(struct ErtsPollSet_)); - - ps->sigs = NULL; - ps->sig_count = 0; - ps->item_count = 0; - ps->info = NULL; - ps->interrupt = (PROCESS)0; - erts_atomic32_init_nob(&ps->wakeup_state, ERTS_POLL_NOT_WOKEN); - init_timeout_time(ps); -#ifdef ERTS_SMP - erts_smp_mtx_init(&ps->mtx, "pollset"); -#endif - update_sigsel(ps); - HARDTRACEF("%ux: Out erts_poll_create_pollset",ps); - return ps; -} - -void erts_poll_destroy_pollset(ErtsPollSet ps) -{ - ErtsSigSelInfo *info; - for (info = ps->info; ps->info != NULL; info = ps->info, ps->info = ps->info->next) { - ErtsSigSelItem *item; - for (item = info->fds; info->fds != NULL; item = info->fds, info->fds = info->fds->next) - SEL_FREE(ERTS_ALC_T_POLLSET, item); - SEL_FREE(ERTS_ALC_T_POLLSET, info); - } - - SEL_FREE(ERTS_ALC_T_POLLSET,ps->sigs); - -#ifdef ERTS_SMP - erts_smp_mtx_destroy(&ps->mtx); -#endif - - SEL_FREE(ERTS_ALC_T_POLLSET,ps); -} - -void erts_poll_init(void) -{ - HARDTRACEF("In %s", __FUNCTION__); - max_fds = 256; - - HARDTRACEF("Out %s", __FUNCTION__); -} - - -/* OSE driver functions */ - -union SIGNAL *erl_drv_ose_get_signal(ErlDrvEvent drv_ev) { - struct erts_sys_fd_type *ev = (struct erts_sys_fd_type *)drv_ev; - ethr_mutex_lock(&ev->mtx); - if (ev->msgs == NULL) { - ethr_mutex_unlock(&ev->mtx); - return NULL; - } else { - ErtsPollOseMsgList *msg = ev->msgs; - union SIGNAL *sig = (union SIGNAL*)msg->data; - ASSERT(msg->data); - ev->msgs = msg->next; - ethr_mutex_unlock(&ev->mtx); - erts_free(ERTS_ALC_T_FD_SIG_LIST,msg); - restore(sig); - return sig; - } -} - -ErlDrvEvent -erl_drv_ose_event_alloc(SIGSELECT signo, ErlDrvOseEventId id, - ErlDrvOseEventId (*resolve_signal)(union SIGNAL *sig), void *extra) { - struct erts_sys_fd_type *ev = erts_alloc(ERTS_ALC_T_DRV_EV, - sizeof(struct erts_sys_fd_type)); - ev->signo = signo; - ev->extra = extra; - ev->id = id; - ev->msgs = NULL; - ev->resolve_signal = resolve_signal; - ethr_mutex_init(&ev->mtx); - return (ErlDrvEvent)ev; -} - -void erl_drv_ose_event_free(ErlDrvEvent drv_ev) { - struct erts_sys_fd_type *ev = (struct erts_sys_fd_type *)drv_ev; - ASSERT(ev->msgs == NULL); - ethr_mutex_destroy(&ev->mtx); - erts_free(ERTS_ALC_T_DRV_EV,ev); -} - -void erl_drv_ose_event_fetch(ErlDrvEvent drv_ev, SIGSELECT *signo, - ErlDrvOseEventId *id, void **extra) { - struct erts_sys_fd_type *ev = (struct erts_sys_fd_type *)drv_ev; - if (signo) - *signo = ev->signo; - if (extra) - *extra = ev->extra; - if (id) - *id = ev->id; -} diff --git a/erts/emulator/sys/ose/erts.sig b/erts/emulator/sys/ose/erts.sig deleted file mode 100644 index 78b883ee6c..0000000000 --- a/erts/emulator/sys/ose/erts.sig +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef ERTS_OSE_SIGNALS -#define ERTS_OSE_SIGNALS - -#ifndef ERTS_OSE_SIGNAL_BASE -#define ERTS_OSE_SIGNAL_BASE 0x01900280 -#endif - -#define ERTS_SIGNAL_INVALID ERTS_OSE_SIGNAL_BASE -#define ERTS_SIGNAL_FD_DRV_CONFIG ERTS_OSE_SIGNAL_BASE+1 -#define ERTS_SIGNAL_FD_DRV_ASYNC ERTS_OSE_SIGNAL_BASE+2 -#define ERTS_SIGNAL_OSE_DRV_ATTACH ERTS_OSE_SIGNAL_BASE+3 -#define ERTS_SIGNAL_OSE_DRV_HUNT ERTS_OSE_SIGNAL_BASE+4 - -#define ERTS_SIGNAL_RUN_ERL_SETUP ERTS_OSE_SIGNAL_BASE+100 -#define ERTS_SIGNAL_RUN_ERL_DAEMON ERTS_OSE_SIGNAL_BASE+101 - -#endif diff --git a/erts/emulator/sys/ose/gcc_4.4.3_lm_ppc.lcf b/erts/emulator/sys/ose/gcc_4.4.3_lm_ppc.lcf deleted file mode 100644 index a19d23facf..0000000000 --- a/erts/emulator/sys/ose/gcc_4.4.3_lm_ppc.lcf +++ /dev/null @@ -1,182 +0,0 @@ -/******************************************************************************* - * Copyright (C) 2013-2014 by Enea Software AB, - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************/ - -OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc") -OUTPUT_ARCH("powerpc") -ENTRY("crt0_lm") -MEMORY -{ - rom : ORIGIN = 0x01000000, LENGTH = 0x01000000 - ram : ORIGIN = 0x02000000, LENGTH = 0x01000000 -} -PHDRS -{ - ph_conf PT_LOAD ; - ph_rom PT_LOAD ; - ph_ram PT_LOAD ; -} -SECTIONS -{ - .text : - { - *(.text_first) - *(.text) - *(.text.*) - *(.stub) - *(oscode) - *(.init*) - *(.fini*) - *(.gnu.warning) - *(.gnu.linkonce.t.*) - *(.glue_7t) - *(.glue_7) - } > rom :ph_rom = 0 - .ose_sfk_biosentry : - { - *(.ose_sfk_biosentry) - } > rom :ph_rom - .ctors : - { - __CTOR_LIST__ = .; - *(.ctors) - *(SORT(.ctors.*)) - __CTOR_END__ = .; - } > rom :ph_rom - .dtors : - { - __DTOR_LIST__ = .; - *(.dtors) - *(SORT(.dtors.*)) - __DTOR_END__ = .; - } > rom :ph_rom - OSESYMS : - { - *(.osesyms) - } > rom :ph_rom - .rodata : - { - *(.rodata) - *(.rodata.*) - *(.gnu.linkonce.r.*) - } > rom :ph_rom - .eh_frame_hdr : - { - *(.eh_frame_hdr) - } > rom :ph_rom - .eh_frame : - { - __EH_FRAME_BEGIN__ = .; - *(.eh_frame) - LONG(0) - __EH_FRAME_END__ = .; - } > rom :ph_rom - .gcc_except_table : - { - *(.gcc_except_table .gcc_except_table.*) - } > rom :ph_rom - .sdata2 : - { - PROVIDE (_SDA2_BASE_ = .); - *(.sdata2) - *(.sdata2.*) - *(.gnu.linkonce.s2.*) - } > rom :ph_rom - .sbss2 : - { - *(.sbss2) - *(.sbss2.*) - *(.gnu.linkonce.sb2.*) - } > rom :ph_rom - LMCONF : - { - obj/?*?/ose_confd.o(.rodata) - *(LMCONF) - } > rom :ph_conf - .data : - { - LONG(0xDEADBABE) - *(.data) - *(.data.*) - *(.gnu.linkonce.d.*) - SORT(CONSTRUCTORS) - . = ALIGN(0x10); - } > ram :ph_ram = 0 - .sdata2 : - { - _SDA2_BASE_ = .; - *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) - }> ram :ph_ram - .sdata : - { - PROVIDE (_SDA_BASE_ = .); - *(.sdata) - *(.sdata.*) - *(.gnu.linkonce.s.*) - } > ram :ph_ram - .sbss : - { - *(.sbss) - *(.sbss.*) - *(.scommon) - *(.gnu.linkonce.sb.*) - } > ram :ph_ram - .bss (NOLOAD) : - { - *(.bss) - *(.bss.*) - *(COMMON) - *(.gnu.linkonce.b.*) - *(.osvars) - } > ram :ph_ram - .ignore (NOLOAD) : - { - *(.rel.dyn) - } > ram :ph_ram - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} -__OSESYMS_START = ADDR(OSESYMS); -__OSESYMS_END = ADDR(OSESYMS) + SIZEOF(OSESYMS); diff --git a/erts/emulator/sys/ose/gcc_4.6.3_lm_ppc.lcf b/erts/emulator/sys/ose/gcc_4.6.3_lm_ppc.lcf deleted file mode 100644 index 3440c2961b..0000000000 --- a/erts/emulator/sys/ose/gcc_4.6.3_lm_ppc.lcf +++ /dev/null @@ -1,242 +0,0 @@ -/******************************************************************************* - * Copyright (C) 2013-2014 by Enea Software AB, - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************/ - -OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc") -OUTPUT_ARCH("powerpc") - -ENTRY("crt0_lm") - -/* Note: - * You may have to increase the length of the "rom" memory region and the - * origin and length of the "ram" memory region below depending on the size - * of the code and data in your load module. - */ - -MEMORY -{ - conf : ORIGIN = 0x00100000, LENGTH = 0x00030000 - rom : ORIGIN = 0x01000000, LENGTH = 0x01000000 - ram : ORIGIN = 0x03000000, LENGTH = 0x01000000 -} - -PHDRS -{ - ph_conf PT_LOAD ; - ph_rom PT_LOAD ; - ph_ram PT_LOAD ; -} - -SECTIONS -{ -/*--------------------------------------------------------------------------- - * Load module configuration area - *-------------------------------------------------------------------------*/ - - /* Load module configuration section. */ - LMCONF : - { - obj/?*?/ose_confd.o(.rodata) - *(LMCONF) - } > conf :ph_conf - -/*--------------------------------------------------------------------------- - * Read-only area - *-------------------------------------------------------------------------*/ - - /* Code section. */ - .text : - { - *(.text) - *(.text.*) - *(.stub) - *(oscode) - *(.init*) - *(.fini*) - *(.gnu.warning) - *(.gnu.linkonce.t.*) - } > rom :ph_rom = 0 - - /* OSE symbols section. */ - OSESYMS : - { - *(.osesyms) - } > rom :ph_rom - - /* Read-only data section. */ - .rodata : - { - *(.rodata) - *(.rodata.*) - *(.gnu.linkonce.r.*) - } > rom :ph_rom - - /* C++ exception handling section. */ - .eh_frame : - { - __EH_FRAME_BEGIN__ = .; - *(.eh_frame) - LONG(0) - __EH_FRAME_END__ = .; - } > rom :ph_rom - - /* C++ exception handling section. */ - .gcc_except_table : - { - *(.gcc_except_table .gcc_except_table.*) - } > rom :ph_rom - - /* PowerPC EABI initialized read-only data section. */ - .sdata2 : - { - PROVIDE (_SDA2_BASE_ = .); - *(.sdata2) - *(.sdata2.*) - *(.gnu.linkonce.s2.*) - } > rom :ph_rom - - /* PowerPC EABI uninitialized read-only data section. */ - .sbss2 : - { - *(.sbss2) - *(.sbss2.*) - *(.gnu.linkonce.sb2.*) - } > rom :ph_rom - -/*--------------------------------------------------------------------------- - * Read-write area - *-------------------------------------------------------------------------*/ - - /*------------------------------------------------------------------- - * Initialized data (copied by PM) - *-----------------------------------------------------------------*/ - - /* Data section. */ - .data : - { - *(.data) - *(.data.*) - *(.gnu.linkonce.d.*) - SORT(CONSTRUCTORS) - } > ram :ph_ram - - /* C++ constructor section. */ - .ctors : - { - __CTOR_LIST__ = .; - *(.ctors) - *(SORT(.ctors.*)) - __CTOR_END__ = .; - } > ram :ph_ram - - /* C++ destructor section. */ - .dtors : - { - __DTOR_LIST__ = .; - *(.dtors) - *(SORT(.dtors.*)) - __DTOR_END__ = .; - } > ram :ph_ram - - - /* Small data section. */ - .sdata ALIGN(0x10) : - { - PROVIDE (_SDA_BASE_ = .); - *(.sdata) - *(.sdata.*) - *(.gnu.linkonce.s.*) - } > ram :ph_ram - - /*------------------------------------------------------------------- - * Uninitialized data (cleared by PM) - *-----------------------------------------------------------------*/ - - /* Small bss section. */ - .sbss : - { - *(.sbss) - *(.sbss.*) - *(.scommon) - *(.gnu.linkonce.sb.*) - } > ram :ph_ram - - /* Bss section. */ - .bss : - { - *(.bss) - *(.bss.*) - *(COMMON) - *(.gnu.linkonce.b.*) - } > ram :ph_ram - -/*--------------------------------------------------------------------------- - * Debug information - *-------------------------------------------------------------------------*/ - - /* - * Stabs debug sections. - */ - - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - - /* - * DWARF debug sections. - */ - - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} diff --git a/erts/emulator/sys/ose/sys.c b/erts/emulator/sys/ose/sys.c deleted file mode 100644 index bcd0ffa0b6..0000000000 --- a/erts/emulator/sys/ose/sys.c +++ /dev/null @@ -1,1847 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 1996-2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif -#include "sys/time.h" -#include "time.h" -#include "sys/uio.h" -#include "termios.h" -#include "ctype.h" -#include "termios.h" - -#ifdef HAVE_FCNTL_H -#include "fcntl.h" -#endif - -#ifdef HAVE_SYS_IOCTL_H -#include "sys/ioctl.h" -#endif - -#define ERTS_WANT_BREAK_HANDLING -#define WANT_NONBLOCKING -#include "sys.h" -#include "erl_thr_progress.h" - -#ifdef USE_THREADS -#include "erl_threads.h" -#endif - -#include "erl_mseg.h" - -#include "unistd.h" -#include "efs.h" -#include "erl_printf.h" -#include "aio.h" -#include "pm.h" -#include "fcntl.h" - -/* Set the define to 1 to get some logging */ -#if 0 -#include "ramlog.h" -#define LOG(output) ramlog_printf output -#else -#define LOG(output) -#endif - -extern char **environ; -static erts_smp_rwmtx_t environ_rwmtx; -static PROCESS sig_proxy_pid = 0; - -#define MAX_VSIZE 16 /* Max number of entries allowed in an I/O - * vector sock_sendv(). - */ -/* - * Don't need global.h, but bif_table.h (included by bif.h), - * won't compile otherwise - */ -#include "global.h" -#include "bif.h" - -#include "erl_sys_driver.h" -#include "erl_check_io.h" -#include "erl_cpu_topology.h" - -/* The priority for reader/writer processes */ -#define FD_PROC_PRI get_pri(current_process()) - -typedef struct ErtsSysReportExit_ ErtsSysReportExit; -struct ErtsSysReportExit_ { - ErtsSysReportExit *next; - Eterm port; - int pid; - int ifd; - int ofd; - ErlDrvEvent attach_event; - ErlDrvEvent input_event; - ErlDrvEvent output_event; -}; - -/* This data is shared by these drivers - initialized by spawn_init() */ -static struct driver_data { - ErlDrvPort port_num; - int ofd; - int ifd; - int packet_bytes; - ErtsSysReportExit *report_exit; - int pid; - int alive; - int status; - ErlDrvEvent input_event; - ErlDrvEvent output_event; - struct aiocb aiocb; - FmHandle handle; - char *install_handle; -} *driver_data; /* indexed by fd */ - -struct async { - SIGSELECT signo; - ErlDrvTermData port; - ErlDrvTermData proc; - PROCESS spid; - PROCESS target; - Uint32 ref; -}; - -static ErtsSysReportExit *report_exit_list; -static ERTS_INLINE void report_exit_status(ErtsSysReportExit *rep, int status); - -extern int driver_interrupt(int, int); -extern void do_break(void); - -extern void erl_sys_args(int*, char**); - -/* The following two defs should probably be moved somewhere else */ - -extern void erts_sys_init_float(void); - -extern void erl_crash_dump(char* file, int line, char* fmt, ...); - -#define DIR_SEPARATOR_CHAR '/' - -#if defined(DEBUG) -#define ERL_BUILD_TYPE_MARKER ".debug" -#else /* opt */ -#define ERL_BUILD_TYPE_MARKER -#endif - -#define CHILD_SETUP_PROG_NAME "child_setup" ERL_BUILD_TYPE_MARKER - -#ifdef DEBUG -static int debug_log = 0; -#endif - -#ifdef ERTS_SMP -static erts_smp_atomic32_t have_prepared_crash_dump; -#define ERTS_PREPARED_CRASH_DUMP \ - ((int) erts_smp_atomic32_xchg_nob(&have_prepared_crash_dump, 1)) -#else -static volatile int have_prepared_crash_dump; -#define ERTS_PREPARED_CRASH_DUMP \ - (have_prepared_crash_dump++) -#endif - -static erts_smp_atomic_t sys_misc_mem_sz; - -#if defined(ERTS_SMP) -erts_mtx_t chld_stat_mtx; -#endif - -#if defined(ERTS_SMP) /* ------------------------------------------------- */ -#define CHLD_STAT_LOCK erts_mtx_lock(&chld_stat_mtx) -#define CHLD_STAT_UNLOCK erts_mtx_unlock(&chld_stat_mtx) - -#else /* ------------------------------------------------------------------- */ -#define CHLD_STAT_LOCK -#define CHLD_STAT_UNLOCK -static volatile int children_died; -#endif - -#define SET_AIO(REQ,FD,SIZE,BUFF) \ - memset(&(REQ),0,sizeof(REQ)); \ - (REQ).aio_fildes = FD; \ - (REQ).aio_offset = FM_POSITION_CURRENT; \ - (REQ).aio_nbytes = SIZE; \ - (REQ).aio_buf = BUFF; \ - (REQ).aio_sigevent.sigev_notify = SIGEV_NONE - -/* the first sizeof(struct aiocb *) bytes of the write buffer - * will contain the pointer to the aiocb struct, this needs - * to be freed between asynchronous writes. - * A write of 0 bytes is ignored. */ -#define WRITE_AIO(FD,SIZE,BUFF) do { \ - if (SIZE > 0) { \ - struct aiocb *write_req = driver_alloc(sizeof(struct aiocb)); \ - char *write_buff = driver_alloc((sizeof(char)*SIZE)+1+ \ - (sizeof(struct aiocb *))); \ - *(struct aiocb **)write_buff = (struct aiocb *)write_req; \ - write_buff += sizeof(struct aiocb *); \ - memcpy(write_buff,BUFF,SIZE+1); \ - SET_AIO(*write_req,FD,SIZE,write_buff); \ - if (aio_write(write_req)) \ - ramlog_printf("%s:%d: write failed with %d\n", \ - __FILE__,__LINE__,errno); \ - } \ -} while(0) - -/* free the write_buffer and write_req - * created in the WRITE_AIO() request macro */ -#define FREE_AIO(ptr) do { \ - struct aiocb *aiocb_ptr; \ - char *buffer_ptr; \ - aiocb_ptr = *(struct aiocb **)((ptr)-sizeof(struct aiocb *)); \ - buffer_ptr = (((char*)ptr)-sizeof(struct aiocb *)); \ - driver_free(aiocb_ptr); \ - driver_free(buffer_ptr); \ -} while(0) - -#define DISPATCH_AIO(sig) do { \ - if (aio_dispatch(sig)) \ - ramlog_printf("%s:%d: dispatch failed with %d\n", \ - __FILE__,__LINE__,errno); \ - } while(0) - -#define AIO_PIPE_SIZE 1024 - -/* debug print macros */ -#define DEBUG_RES 0 - -#ifdef DEBUG_RES -#define DEBUG_CHECK_RES(actual, expected) \ - do { \ - if (actual != expected ) { \ - ramlog_printf("Result check failed" \ - " got: 0x%08x expected:0x%08x\nat: %s:%d\n", \ - actual, expected, __FILE__, __LINE__); \ - abort(); /* This might perhaps be too harsh? */ \ - } \ - } while(0) -#else -#define DEBUG_CHECK_RES -#endif - -static struct fd_data { - char pbuf[4]; /* hold partial packet bytes */ - int psz; /* size of pbuf */ - char *buf; - char *cpos; - int sz; - int remain; /* for input on fd */ -} *fd_data; /* indexed by fd */ - -/********************* General functions ****************************/ - -/* This is used by both the drivers and general I/O, must be set early */ -static int max_files = -1; - -/* - * a few variables used by the break handler - */ -#ifdef ERTS_SMP -erts_smp_atomic32_t erts_break_requested; -#define ERTS_SET_BREAK_REQUESTED \ - erts_smp_atomic32_set_nob(&erts_break_requested, (erts_aint32_t) 1) -#define ERTS_UNSET_BREAK_REQUESTED \ - erts_smp_atomic32_set_nob(&erts_break_requested, (erts_aint32_t) 0) -#else -volatile int erts_break_requested = 0; -#define ERTS_SET_BREAK_REQUESTED (erts_break_requested = 1) -#define ERTS_UNSET_BREAK_REQUESTED (erts_break_requested = 0) -#endif -/* set early so the break handler has access to initial mode */ -static struct termios initial_tty_mode; -static int replace_intr = 0; -/* assume yes initially, ttsl_init will clear it */ -int using_oldshell = 1; -static PROCESS get_signal_proxy_pid(void); - -static void -init_check_io(void) -{ - erts_init_check_io(); - max_files = erts_check_io_max_files(); -} - -#ifdef ERTS_POLL_NEED_ASYNC_INTERRUPT_SUPPORT -#define ERTS_CHK_IO_AS_INTR() erts_check_io_async_sig_interrupt() -#else -#define ERTS_CHK_IO_AS_INTR() erts_check_io_interrupt(1) -#endif -#define ERTS_CHK_IO_INTR erts_check_io_interrupt -#define ERTS_CHK_IO_INTR_TMD erts_check_io_interrupt_timed -#define ERTS_CHK_IO erts_check_io -#define ERTS_CHK_IO_SZ erts_check_io_size - - -void -erts_sys_schedule_interrupt(int set) -{ - ERTS_CHK_IO_INTR(set); -} - -#ifdef ERTS_SMP -void -erts_sys_schedule_interrupt_timed(int set, ErtsMonotonicTime timeout_time) -{ - ERTS_CHK_IO_INTR_TMD(set, timeout_time); -} -#endif - -Uint -erts_sys_misc_mem_sz(void) -{ - Uint res = ERTS_CHK_IO_SZ(); - res += erts_smp_atomic_read_mb(&sys_misc_mem_sz); - return res; -} - -/* - * reset the terminal to the original settings on exit - */ -void sys_tty_reset(int exit_code) -{ - if (using_oldshell && !replace_intr) { - SET_BLOCKING(0); - } - else if (isatty(0)) { - tcsetattr(0,TCSANOW,&initial_tty_mode); - } -} - -#ifdef USE_THREADS - -typedef struct { - int sched_bind_data; -} erts_thr_create_data_t; - -/* - * thr_create_prepare() is called in parent thread before thread creation. - * Returned value is passed as argument to thr_create_cleanup(). - */ -static void * -thr_create_prepare(void) -{ - erts_thr_create_data_t *tcdp; - - tcdp = erts_alloc(ERTS_ALC_T_TMP, sizeof(erts_thr_create_data_t)); - - tcdp->sched_bind_data = erts_sched_bind_atthrcreate_prepare(); - - return (void *) tcdp; -} - - -/* thr_create_cleanup() is called in parent thread after thread creation. */ -static void -thr_create_cleanup(void *vtcdp) -{ - erts_thr_create_data_t *tcdp = (erts_thr_create_data_t *) vtcdp; - - erts_sched_bind_atthrcreate_parent(tcdp->sched_bind_data); - - erts_free(ERTS_ALC_T_TMP, tcdp); -} - -static void -thr_create_prepare_child(void *vtcdp) -{ - erts_thr_create_data_t *tcdp = (erts_thr_create_data_t *) vtcdp; - -#ifdef ERTS_ENABLE_LOCK_COUNT - erts_lcnt_thread_setup(); -#endif - - erts_sched_bind_atthrcreate_child(tcdp->sched_bind_data); -} - -#endif /* #ifdef USE_THREADS */ - -/* The two functions below are stolen from win_con.c - They have to use malloc/free/realloc directly becasue - we want to do able to do erts_printf very early on. - */ -#define VPRINTF_BUF_INC_SIZE 128 -static erts_dsprintf_buf_t * -grow_vprintf_buf(erts_dsprintf_buf_t *dsbufp, size_t need) -{ - char *buf; - size_t size; - - ASSERT(dsbufp); - - if (!dsbufp->str) { - size = (((need + VPRINTF_BUF_INC_SIZE - 1) - / VPRINTF_BUF_INC_SIZE) - * VPRINTF_BUF_INC_SIZE); - buf = (char *) malloc(size * sizeof(char)); - } - else { - size_t free_size = dsbufp->size - dsbufp->str_len; - - if (need <= free_size) - return dsbufp; - - size = need - free_size + VPRINTF_BUF_INC_SIZE; - size = (((size + VPRINTF_BUF_INC_SIZE - 1) - / VPRINTF_BUF_INC_SIZE) - * VPRINTF_BUF_INC_SIZE); - size += dsbufp->size; - buf = (char *) realloc((void *) dsbufp->str, - size * sizeof(char)); - } - if (!buf) - return NULL; - if (buf != dsbufp->str) - dsbufp->str = buf; - dsbufp->size = size; - return dsbufp; -} - -static int erts_sys_ramlog_printf(char *format, va_list arg_list) -{ - int res,i; - erts_dsprintf_buf_t dsbuf = ERTS_DSPRINTF_BUF_INITER(grow_vprintf_buf); - res = erts_vdsprintf(&dsbuf, format, arg_list); - if (res >= 0) { - for (i = 0; i < dsbuf.str_len; i+= 50) - /* We print 50 characters at a time because otherwise - the ramlog looks broken */ - ramlog_printf("%.*s",dsbuf.str_len-50 < 0?dsbuf.str_len:50,dsbuf.str+i); - } - if (dsbuf.str) - free((void *) dsbuf.str); - return res; -} - -void -erts_sys_pre_init(void) -{ - erts_printf_add_cr_to_stdout = 1; - erts_printf_add_cr_to_stderr = 1; -#ifdef USE_THREADS - { - erts_thr_init_data_t eid = ERTS_THR_INIT_DATA_DEF_INITER; - - eid.thread_create_child_func = thr_create_prepare_child; - /* Before creation in parent */ - eid.thread_create_prepare_func = thr_create_prepare; - /* After creation in parent */ - eid.thread_create_parent_func = thr_create_cleanup, - - erts_thr_init(&eid); - - report_exit_list = NULL; - -#ifdef ERTS_ENABLE_LOCK_COUNT - erts_lcnt_init(); -#endif - -#if defined(ERTS_SMP) - erts_mtx_init(&chld_stat_mtx, "child_status"); -#endif - } -#ifdef ERTS_SMP - erts_smp_atomic32_init_nob(&erts_break_requested, 0); - erts_smp_atomic32_init_nob(&have_prepared_crash_dump, 0); -#else - erts_break_requested = 0; - have_prepared_crash_dump = 0; -#endif -#if !defined(ERTS_SMP) - children_died = 0; -#endif -#endif /* USE_THREADS */ - - erts_printf_stdout_func = erts_sys_ramlog_printf; - - erts_smp_atomic_init_nob(&sys_misc_mem_sz, 0); -} - -void -erl_sys_init(void) -{ - -#ifdef USE_SETLINEBUF - setlinebuf(stdout); -#else - setvbuf(stdout, (char *)NULL, _IOLBF, BUFSIZ); -#endif - - erts_sys_init_float(); - - /* we save this so the break handler can set and reset it properly */ - /* also so that we can reset on exit (break handler or not) */ - if (isatty(0)) { - tcgetattr(0,&initial_tty_mode); - } - tzset(); /* Required at least for NetBSD with localtime_r() */ -} - -static ERTS_INLINE int -prepare_crash_dump(int secs) -{ -#define NUFBUF (3) - int i, max; - char env[21]; /* enough to hold any 64-bit integer */ - size_t envsz; - /*DeclareTmpHeapNoproc(heap,NUFBUF);*/ - /*Eterm *hp = heap;*/ - /*Eterm list = NIL;*/ - int has_heart = 0; - - UseTmpHeapNoproc(NUFBUF); - - if (ERTS_PREPARED_CRASH_DUMP) - return 0; /* We have already been called */ - - - /* Positive secs means an alarm must be set - * 0 or negative means no alarm - * - * Set alarm before we try to write to a port - * we don't want to hang on a port write with - * no alarm. - * - */ - -#if 0 /*ose TBD!!!*/ - if (secs >= 0) { - alarm((unsigned int)secs); - } -#endif - - /* Make sure we unregister at epmd (unknown fd) and get at least - one free filedescriptor (for erl_crash.dump) */ - - max = max_files; - if (max < 1024) - max = 1024; - for (i = 3; i < max; i++) { - close(i); - } - - envsz = sizeof(env); - i = erts_sys_getenv__("ERL_CRASH_DUMP_NICE", env, &envsz); - if (i >= 0) { - int nice_val; - nice_val = i != 0 ? 0 : atoi(env); - if (nice_val > 39) { - nice_val = 39; - } - set_pri(nice_val); - } - - UnUseTmpHeapNoproc(NUFBUF); -#undef NUFBUF - return has_heart; -} - -int erts_sys_prepare_crash_dump(int secs) -{ - return prepare_crash_dump(secs); -} - -static ERTS_INLINE void -break_requested(void) -{ - /* - * just set a flag - checked for and handled by - * scheduler threads erts_check_io() (not signal handler). - */ -#ifdef DEBUG - fprintf(stderr,"break!\n"); -#endif - if (ERTS_BREAK_REQUESTED) - erl_exit(ERTS_INTR_EXIT, ""); - - ERTS_SET_BREAK_REQUESTED; - ERTS_CHK_IO_AS_INTR(); /* Make sure we don't sleep in poll */ -} - -/* Disable break */ -void erts_set_ignore_break(void) { - -} - -/* Don't use ctrl-c for break handler but let it be - used by the shell instead (see user_drv.erl) */ -void erts_replace_intr(void) { - struct termios mode; - - if (isatty(0)) { - tcgetattr(0, &mode); - - /* here's an example of how to replace ctrl-c with ctrl-u */ - /* mode.c_cc[VKILL] = 0; - mode.c_cc[VINTR] = CKILL; */ - - mode.c_cc[VINTR] = 0; /* disable ctrl-c */ - tcsetattr(0, TCSANOW, &mode); - replace_intr = 1; - } -} - -void init_break_handler(void) -{ - -} - -int sys_max_files(void) -{ - return(max_files); -} - - -/************************** OS info *******************************/ - -/* Used by erlang:info/1. */ -/* (This code was formerly in drv.XXX/XXX_os_drv.c) */ - -char os_type[] = "ose"; - -void -os_flavor(char* namebuf, /* Where to return the name. */ - unsigned size) /* Size of name buffer. */ -{ -#if 0 - struct utsname uts; /* Information about the system. */ - char* s; - - (void) uname(&uts); - for (s = uts.sysname; *s; s++) { - if (isupper((int) *s)) { - *s = tolower((int) *s); - } - } - strcpy(namebuf, uts.sysname); -#else - strncpy(namebuf, "release", size); -#endif -} - -void -os_version(pMajor, pMinor, pBuild) -int* pMajor; /* Pointer to major version. */ -int* pMinor; /* Pointer to minor version. */ -int* pBuild; /* Pointer to build number. */ -{ - *pMajor = 5; - *pMinor = 7; - *pBuild = 0; -} - -void init_getenv_state(GETENV_STATE *state) -{ - erts_smp_rwmtx_rlock(&environ_rwmtx); - *state = NULL; -} - -char **environ; /*ose - needs replacement*/ - -char *getenv_string(GETENV_STATE *state0) -{ - char **state = (char **) *state0; - char *cp; - - ERTS_SMP_LC_ASSERT(erts_smp_lc_rwmtx_is_rlocked(&environ_rwmtx)); - - if (state == NULL) - state = environ; - - cp = *state++; - *state0 = (GETENV_STATE) state; - - return cp; -} - -void fini_getenv_state(GETENV_STATE *state) -{ - *state = NULL; - erts_smp_rwmtx_runlock(&environ_rwmtx); -} - - -/************************** Port I/O *******************************/ - -/* I. Common stuff */ - -union SIGNAL { - SIGSELECT sig_no; - struct FmReadPtr fm_read_reply; - struct FmWritePtr fm_write_reply; - struct async async; -}; - -/* II. The spawn/fd drivers */ - -/* - * Decreasing the size of it below 16384 is not allowed. - */ -#define ERTS_SYS_READ_BUF_SZ (64*1024) - -/* Driver interfaces */ -static ErlDrvData spawn_start(ErlDrvPort, char*, SysDriverOpts*); -static ErlDrvData fd_start(ErlDrvPort, char*, SysDriverOpts*); -static ErlDrvSSizeT fd_control(ErlDrvData, unsigned int, char *, ErlDrvSizeT, - char **, ErlDrvSizeT); -static int spawn_init(void); -static void fd_stop(ErlDrvData); -static void erl_stop(ErlDrvData); -static void ready_input(ErlDrvData, ErlDrvEvent); -static void ready_output(ErlDrvData, ErlDrvEvent); -static void output(ErlDrvData, char*, ErlDrvSizeT); -static void stop_select(ErlDrvEvent, void*); - -static PROCESS -get_signal_proxy_pid(void) { - union SIGNAL *sig; - SIGSELECT any_sig[] = {1,ERTS_SIGNAL_OSE_DRV_ATTACH}; - - if (!sig_proxy_pid) { - sig = alloc(sizeof(union SIGNAL), ERTS_SIGNAL_OSE_DRV_ATTACH); - hunt("ose_signal_driver_proxy", 0, NULL, &sig); - sig = receive(any_sig); - sig_proxy_pid = sender(&sig); - free_buf(&sig); - } - ASSERT(sig_proxy_pid); - return sig_proxy_pid; -} - -static ErlDrvOseEventId -resolve_signal(union SIGNAL* sig) { - switch(sig->sig_no) { - - case FM_READ_PTR_REPLY: - return (ErlDrvOseEventId)sig->fm_read_reply.handle; - - case FM_WRITE_PTR_REPLY: - return (ErlDrvOseEventId)sig->fm_write_reply.handle; - - case ERTS_SIGNAL_OSE_DRV_ATTACH: - return (ErlDrvOseEventId)sig->async.target; - - default: - break; - } - return (ErlDrvOseEventId)-1; -} - -struct erl_drv_entry spawn_driver_entry = { - spawn_init, - spawn_start, - NULL, /* erl_stop, */ - output, - ready_input, - ready_output, - "spawn", - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - ERL_DRV_FLAG_USE_PORT_LOCKING, - NULL, NULL, - stop_select -}; -struct erl_drv_entry fd_driver_entry = { - NULL, - fd_start, - fd_stop, - output, - ready_input, - ready_output, - "fd", - NULL, - NULL, - fd_control, - NULL, - NULL, - NULL, /* ready_async */ - NULL, /* flush */ - NULL, /* call */ - NULL, /* event */ - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - 0, /* ERL_DRV_FLAGs */ - NULL, /* handle2 */ - NULL, /* process_exit */ - stop_select -}; - -static void -set_spawn_fd(int local_fd, int remote_fd, PROCESS remote_pid) { - PROCESS vm_pid; - FmHandle handle; - char env_val[55]; - char env_name[10]; - EfsStatus efs_res; - - /* get pid of pipevm and handle of chosen fd */ - efs_res = efs_examine_fd(local_fd, FLIB_FD_VMPID, &vm_pid, 0); - DEBUG_CHECK_RES(efs_res, EFS_SUCCESS); - - /* setup the file descriptor to buffer per line */ - efs_res = efs_config_fd(local_fd, FLIB_FD_BUFMODE, FM_BUFF_LINE, - FLIB_FD_BUFSIZE, 80, 0); - DEBUG_CHECK_RES(efs_res, EFS_SUCCESS); - - /* duplicate handle and set spawn pid owner */ - efs_res = efs_dup_to(local_fd, remote_pid, &handle); - DEBUG_CHECK_RES(efs_res, EFS_SUCCESS); - - sprintf(env_name, "FD%d", remote_fd); - - /* Syntax of the environment variable: - * "FD#" "<pid of pipevm>,<handle>,<buffer mode>,<buff size>,<omode>" */ - sprintf(env_val, "0x%lx,0x%lx,%lu,%lu,0x%x", - vm_pid, handle, - FM_BUFF_LINE, 80, - O_APPEND); - - set_env(remote_pid, env_name, env_val); -} - -static ErlDrvData -set_driver_data(ErlDrvPort port_num, - int ifd, - int ofd, - int packet_bytes, - int read_write, - int exit_status, - PROCESS pid) -{ - Port *prt; - ErtsSysReportExit *report_exit; - - prt = erts_drvport2port(port_num); - if (prt != ERTS_INVALID_ERL_DRV_PORT) { - prt->os_pid = pid; - } - - /* READ */ - if (read_write & DO_READ) { - EfsStatus res = efs_examine_fd(ifd, FLIB_FD_HANDLE, - &driver_data[ifd].handle, 0); - if (res != EFS_SUCCESS) - ramlog_printf("%s:%d: efs_examine_fd(%d) failed with %d\n", - __FILE__,__LINE__,ifd,errno); - driver_data[ifd].ifd = ifd; - driver_data[ifd].packet_bytes = packet_bytes; - driver_data[ifd].port_num = port_num; - driver_data[ifd].pid = pid; - - /* async read struct */ - memset(&driver_data[ifd].aiocb, 0, sizeof(struct aiocb)); - driver_data[ifd].aiocb.aio_buf = driver_alloc(AIO_PIPE_SIZE); - driver_data[ifd].aiocb.aio_fildes = ifd; - driver_data[ifd].aiocb.aio_nbytes = (packet_bytes?packet_bytes:AIO_PIPE_SIZE); - driver_data[ifd].alive = 1; - driver_data[ifd].status = 0; - driver_data[ifd].input_event = - erl_drv_ose_event_alloc(FM_READ_PTR_REPLY, - driver_data[ifd].handle, resolve_signal, - &driver_data[ifd].ifd); - - /* READ & WRITE */ - if (read_write & DO_WRITE) { - driver_data[ifd].ofd = ofd; - efs_examine_fd(ofd, FLIB_FD_HANDLE, &driver_data[ofd].handle, 0); - - driver_data[ifd].output_event = - erl_drv_ose_event_alloc(FM_WRITE_PTR_REPLY, - driver_data[ofd].handle, resolve_signal, - &driver_data[ofd].ofd); - driver_data[ofd].pid = pid; - if (ifd != ofd) { - driver_data[ofd] = driver_data[ifd]; - driver_data[ofd].aiocb.aio_buf = NULL; - } - } - else { /* READ ONLY */ - driver_data[ifd].ofd = -1; - } - - /* enable input event */ - (void) driver_select(port_num, driver_data[ifd].input_event, - (ERL_DRV_READ | ERL_DRV_USE), 1); - - if (aio_read(&driver_data[ifd].aiocb)) - ramlog_printf("%s:%d: aio_read(%d) failed with %d\n", - __FILE__,__LINE__,ifd,errno); - } - else { /* WRITE ONLY */ - efs_examine_fd(ofd, FLIB_FD_HANDLE, &driver_data[ofd].handle, 0); - driver_data[ofd].packet_bytes = packet_bytes; - driver_data[ofd].port_num = port_num; - driver_data[ofd].ofd = ofd; - driver_data[ofd].pid = pid; - driver_data[ofd].alive = 1; - driver_data[ofd].status = 0; - driver_data[ofd].output_event = - erl_drv_ose_event_alloc(FM_WRITE_PTR_REPLY, driver_data[ofd].handle, - resolve_signal, &driver_data[ofd].ofd); - driver_data[ofd].input_event = driver_data[ofd].output_event; - } - - /* this is used for spawned load modules, and is needed - * to properly uninstall them */ - if (exit_status) { - struct PmProgramInfo *info; - int install_handle_size; - union SIGNAL *sig; - PmStatus pm_status; - report_exit = erts_alloc(ERTS_ALC_T_PRT_REP_EXIT, - sizeof(ErtsSysReportExit)); - report_exit->next = report_exit_list; - report_exit->port = erts_drvport2id(port_num); - report_exit->pid = pid; - report_exit->ifd = (read_write & DO_READ) ? ifd : -1; - report_exit->ofd = (read_write & DO_WRITE) ? ofd : -1; - report_exit_list = report_exit; - report_exit->attach_event = - erl_drv_ose_event_alloc(ERTS_SIGNAL_OSE_DRV_ATTACH, pid, - resolve_signal, &driver_data[ifd].ifd); - - /* setup ifd and ofd report exit */ - driver_data[ifd].report_exit = report_exit; - driver_data[ofd].report_exit = report_exit; - - pm_status = ose_pm_program_info(pid, &info); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - install_handle_size = strlen(info->install_handle)+1; - driver_data[ifd].install_handle = driver_alloc(install_handle_size); - strcpy(driver_data[ifd].install_handle, - info->install_handle); - - free_buf((union SIGNAL **)&info); - - sig = alloc(sizeof(struct async), ERTS_SIGNAL_OSE_DRV_ATTACH); - sig->async.target = pid; - send(&sig, get_signal_proxy_pid()); - - /* this event will trigger when we receive an attach signal - * from the recently dead load module */ - (void)driver_select(port_num,report_exit->attach_event, DO_READ, 1); - } - else { - report_exit = NULL; - } - - /* the return value is the pointer to the driver_data struct we created - * in this function, it will be used in the drivers input - * and output functions */ - return (ErlDrvData)((!(read_write & DO_READ) && read_write & DO_WRITE) - ? &driver_data[ofd] - : &driver_data[ifd]); -} - -static int spawn_init() -{ - int i; - - driver_data = (struct driver_data *) - erts_alloc(ERTS_ALC_T_DRV_TAB, max_files * sizeof(struct driver_data)); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, - max_files * sizeof(struct driver_data)); - - for (i = 0; i < max_files; i++) - driver_data[i].pid = -1; - - return 1; -} - -static void -init_fd_data(int fd, ErlDrvPort port_num) -{ - fd_data[fd].buf = NULL; - fd_data[fd].cpos = NULL; - fd_data[fd].remain = 0; - fd_data[fd].sz = 0; - fd_data[fd].psz = 0; -} - -/* FIXME write a decent text on pipes on ose */ -static ErlDrvData -spawn_start(ErlDrvPort port_num, char* name, SysDriverOpts* opts) -{ - int ifd[2]; - int ofd[2]; - static uint32_t ticker = 1; - PmStatus pm_status; - OSDOMAIN domain = PM_NEW_DOMAIN; - PROCESS progpid, mainbid, mainpid; - char *handle = NULL; - struct PmProgramInfo *info; - char *args = NULL; - char *tmp_handle; - ErlDrvData res = (ErlDrvData)-1; - int handle_size; - char *ptr; - - - args = driver_alloc(strlen(name)+1); - strcpy(args, name); - /* We need to handle name in three parts - * - install handle (must be unique) - * - install binary (needed for ose_pm_install_load_module()) - * - full path (as argument to the spawned applications env.var - */ - - /* full path including arguments */ - args = driver_alloc(strlen(name)+1); - strcpy(args, name); - - /* handle path */ - tmp_handle = strrchr(name, '/'); - if (tmp_handle == NULL) { - tmp_handle = name; - } - else { - tmp_handle++; - } - - /* handle args */ - ptr = strchr(tmp_handle, ' '); - if (ptr != NULL) { - *ptr = '\0'; - handle_size = ptr - tmp_handle; - } - else { - handle_size = strlen(name)+1; - } - - /* make room for ticker */ - handle_size += (ticker<10)?3:((ticker<100)?4:5); - handle = driver_alloc(handle_size); - - do { - snprintf(handle, handle_size, "%s_%d", tmp_handle, ticker); - pm_status = ose_pm_install_load_module(0, "ELF", name, handle, - 0, 0, NULL); - ticker++; - } while (pm_status == PM_EINSTALL_HANDLE_ALREADY_INSTALLED); - - if (pm_status != PM_SUCCESS) { - errno = ENOSYS; /* FIXME add comment */ - return ERL_DRV_ERROR_ERRNO; - } - - /* Create Program */ - pm_status = ose_pm_create_program(&domain, handle, 0, 0, - NULL, &progpid, &mainbid); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - /* Get the mainpid from the newly created program */ - pm_status = ose_pm_program_info(progpid, &info); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - mainpid = info->main_process; - free_buf ((union SIGNAL **)&info); - - /* pipevm needs to be started - * pipe will return 0 if success, -1 if not, - * errno will be set */ - if (pipe(ifd) != 0 || pipe(ofd) != 0) { - DEBUG_CHECK_RES(0, -1); - ASSERT(0); - } - - /* setup driver data */ - res = set_driver_data(port_num, ofd[0], ifd[1], opts->packet_bytes, - opts->read_write, 1 /* opts->exit_status */, progpid); - - /* init the fd_data array for read/write */ - init_fd_data(ofd[0], port_num); - init_fd_data(ifd[1], port_num); - - /* setup additional configurations - * for the spawned applications environment */ - if (args != NULL) { - set_env(progpid, "ARGV", args); - } - set_env(mainbid, "EFS_RESOLVE_TMO", 0); - set_spawn_fd(ifd[0], 0, mainpid); - set_spawn_fd(ofd[1], 1, mainpid); - set_spawn_fd(ofd[1], 2, mainpid); - - /* start the spawned program */ - pm_status = ose_pm_start_program(mainbid); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - /* close unused fd's */ - close(ifd[0]); - close(ofd[1]); - - if (handle) { - driver_free(handle); - } - - return (ErlDrvData)res; -} - -#define FD_DEF_HEIGHT 24 -#define FD_DEF_WIDTH 80 -/* Control op */ -#define FD_CTRL_OP_GET_WINSIZE 100 - -static int fd_get_window_size(int fd, Uint32 *width, Uint32 *height) -{ -#ifdef TIOCGWINSZ - struct winsize ws; - if (ioctl(fd,TIOCGWINSZ,&ws) == 0) { - *width = (Uint32) ws.ws_col; - *height = (Uint32) ws.ws_row; - return 0; - } -#endif - return -1; -} - -static ErlDrvSSizeT fd_control(ErlDrvData drv_data, - unsigned int command, - char *buf, ErlDrvSizeT len, - char **rbuf, ErlDrvSizeT rlen) -{ - struct driver_data *data = (struct driver_data *)drv_data; - char resbuff[2*sizeof(Uint32)]; - switch (command) { - case FD_CTRL_OP_GET_WINSIZE: - { - Uint32 w,h; - if (fd_get_window_size(data->ifd,&w,&h)) - return 0; - memcpy(resbuff,&w,sizeof(Uint32)); - memcpy(resbuff+sizeof(Uint32),&h,sizeof(Uint32)); - } - break; - default: - return 0; - } - if (rlen < 2*sizeof(Uint32)) { - *rbuf = driver_alloc(2*sizeof(Uint32)); - } - memcpy(*rbuf,resbuff,2*sizeof(Uint32)); - return 2*sizeof(Uint32); -} - -static ErlDrvData fd_start(ErlDrvPort port_num, char* name, - SysDriverOpts* opts) -{ - ErlDrvData res; - - CHLD_STAT_LOCK; - if (opts->read_write & DO_READ) { - init_fd_data(opts->ifd, port_num); - } - if (opts->read_write & DO_WRITE) { - init_fd_data(opts->ofd, port_num); - } - res = set_driver_data(port_num, opts->ifd, opts->ofd, - opts->packet_bytes, - opts->read_write, 0, -1); - CHLD_STAT_UNLOCK; - return res; -} - -static void clear_fd_data(int fd) -{ - if (fd_data[fd].sz > 0) { - erts_free(ERTS_ALC_T_FD_ENTRY_BUF, (void *) fd_data[fd].buf); - ASSERT(erts_smp_atomic_read_nob(&sys_misc_mem_sz) >= fd_data[fd].sz); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, -1*fd_data[fd].sz); - } - fd_data[fd].buf = NULL; - fd_data[fd].sz = 0; - fd_data[fd].remain = 0; - fd_data[fd].cpos = NULL; - fd_data[fd].psz = 0; -} - -static void nbio_stop_fd(ErlDrvPort prt, ErlDrvEvent ev) -{ - int *fd; - driver_select(prt,ev,DO_READ|DO_WRITE,0); - erl_drv_ose_event_fetch(ev, NULL, NULL, (void **)&fd); - clear_fd_data(*fd); - SET_BLOCKING(*fd); -} - -static void fd_stop(ErlDrvData drv_data) /* Does not close the fds */ -{ - struct driver_data *data = (struct driver_data *)drv_data; - - if (data->ofd != -1) { - if (data->ifd != data->ofd) { /* read and write */ - nbio_stop_fd(data->port_num, data->input_event); - nbio_stop_fd(data->port_num, data->output_event); - } - else { /* write only */ - nbio_stop_fd(data->port_num, data->output_event); - } - } - else { /* read only */ - nbio_stop_fd(data->port_num, data->input_event); - } -} - - -static void erl_stop(ErlDrvData drv_data) -{ - struct driver_data *data = (struct driver_data *)drv_data; - - CHLD_STAT_LOCK; - data->pid = -1; - CHLD_STAT_UNLOCK; - - if (data->ofd != -1) { - if (data->ifd != data->ofd) { /* read and write */ - nbio_stop_fd(data->port_num, data->input_event); - nbio_stop_fd(data->port_num, data->output_event); - } - else { /* write only */ - nbio_stop_fd(data->port_num, data->output_event); - } - } - else { /* read only */ - nbio_stop_fd(data->port_num, data->input_event); - } - close(data->ifd); - close(data->ofd); -} - -/* The parameter e is a pointer to the driver_data structure - * related to the fd to be used as output */ -static void output(ErlDrvData drv_data, char* buf, ErlDrvSizeT len) -{ - ErlDrvSizeT sz; - char lb[4]; - char* lbp; - struct driver_data *data = (struct driver_data *)drv_data; - - if (((data->packet_bytes == 2) && - (len > 0xffff)) || (data->packet_bytes == 1 && len > 0xff)) { - driver_failure_posix(data->port_num, EINVAL); - return; /* -1; */ - } - put_int32(len, lb); - lbp = lb + (4-(data->packet_bytes)); - - if ((sz = driver_sizeq(data->port_num)) > 0) { - if (data->packet_bytes != 0) { - driver_enq(data->port_num, lbp, data->packet_bytes); - } - driver_enq(data->port_num, buf, len); - - if (sz + len + data->packet_bytes >= (1 << 13)) - set_busy_port(data->port_num, 1); - } - else { - char *pbbuf; - if (data->packet_bytes != 0) { - pbbuf = malloc(len + data->packet_bytes); - int i; - for (i = 0; i < data->packet_bytes; i++) { - *pbbuf++ = *lbp++; - } - strncpy(pbbuf, buf, len); - pbbuf -= data->packet_bytes; - } - driver_select(data->port_num, data->output_event, - ERL_DRV_WRITE|ERL_DRV_USE, 1); - WRITE_AIO(data->ofd, - (data->packet_bytes ? len+data->packet_bytes : len), - (data->packet_bytes ? pbbuf : buf)); - if (data->packet_bytes != 0) free(pbbuf); - } - return; /* 0; */ -} - -/* This function is being run when we in recieve - * either a read of 0 bytes, or the attach signal from a dying - * spawned load module */ -static int port_inp_failure(ErlDrvPort port_num, ErlDrvEvent ready_fd, int res) - /* Result: 0 (eof) or -1 (error) */ -{ - int *fd; - SIGSELECT sig_no; - ASSERT(res <= 0); - - erl_drv_ose_event_fetch(ready_fd,&sig_no, NULL, (void **)&fd); - /* As we need to handle two signals, we do this in two steps */ - if (driver_data[*fd].alive) { - report_exit_status(driver_data[*fd].report_exit, 0); /* status? */ - } - else { - driver_select(port_num,ready_fd,DO_READ|DO_WRITE,0); - clear_fd_data(*fd); - driver_report_exit(driver_data[*fd].port_num, driver_data[*fd].status); - /* As we do not really know if the spawn has crashed or exited nicely - * we do not check the result status of the following call.. FIXME - * can we handle this in a better way? */ - ose_pm_uninstall_load_module(driver_data[*fd].install_handle); - driver_free(driver_data[*fd].install_handle); - driver_free((void *)driver_data[*fd].aiocb.aio_buf); - - close(*fd); - } - - return 0; -} - -/* The parameter e is a pointer to the driver_data structure - * related to the fd to be used as output. - * ready_fd is the event that triggered this call to ready_input */ -static void ready_input(ErlDrvData drv_data, ErlDrvEvent ready_fd) -{ - int res; - Uint h; - char *buf; - union SIGNAL *sig; - struct driver_data *data = (struct driver_data *)drv_data; - - sig = erl_drv_ose_get_signal(ready_fd); - ASSERT(sig); - - - while (sig) { - /* If we've recieved an attach signal, we need to handle - * it in port_inp_failure */ - if (sig->sig_no == ERTS_SIGNAL_OSE_DRV_ATTACH) { - port_inp_failure(data->port_num, ready_fd, 0); - } - else { - res = sig->fm_read_reply.actual; - if (res == 0) { - port_inp_failure(data->port_num, ready_fd, res); - break; - } - - if (data->packet_bytes == 0) { - if (res < 0) { - if ((errno != EINTR) && (errno != ERRNO_BLOCK)) { - port_inp_failure(data->port_num, ready_fd, res); - } - } - else if (res == 0) { - /* read of 0 bytes, eof, otherside of pipe is assumed dead */ - port_inp_failure(data->port_num, ready_fd, res); - break; - } - else { - buf = driver_alloc(res); - memcpy(buf, (void *)data->aiocb.aio_buf, res); - driver_select(data->port_num, data->output_event, - ERL_DRV_WRITE|ERL_DRV_USE, 1); - driver_output(data->port_num, (char*) buf, res); - driver_free(buf); - } - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, res); - - /* issue a new read */ - DISPATCH_AIO(sig); - aio_read(&data->aiocb); - } - else if (data->packet_bytes && fd_data[data->ifd].remain > 0) { - /* we've read a partial package, or a header */ - - if (res == fd_data[data->ifd].remain) { /* we are done! */ - char *buf = data->aiocb.aio_buf; - int i; - - /* do we have anything buffered? */ - if (fd_data[data->ifd].buf != NULL) { - memcpy(fd_data[data->ifd].buf + fd_data[data->ifd].sz, - buf, res); - buf = fd_data[data->ifd].buf; - } - - fd_data[data->ifd].sz += res; - driver_output(data->port_num, buf, (fd_data[data->ifd].sz>0?fd_data[data->ifd].sz:res)); - clear_fd_data(data->ifd); - - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, res); - - /* issue a new read */ - DISPATCH_AIO(sig); - data->aiocb.aio_nbytes = data->packet_bytes; - - if (data->aiocb.aio_buf == NULL) { - port_inp_failure(data->port_num, ready_fd, -1); - } - aio_read(&data->aiocb); - } - else if(res < fd_data[data->ifd].remain) { /* received part of a package */ - if (fd_data[data->ifd].sz == 0) { - - fd_data[data->ifd].sz += res; - memcpy(fd_data[data->ifd].buf, data->aiocb.aio_buf, res); - fd_data[data->ifd].remain -= res; - } - else { - memcpy(fd_data[data->ifd].buf + fd_data[data->ifd].sz, - data->aiocb.aio_buf, res); - fd_data[data->ifd].sz += res; - fd_data[data->ifd].remain -= res; - } - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, res); - - /* issue a new read */ - DISPATCH_AIO(sig); - data->aiocb.aio_nbytes = fd_data[data->ifd].remain; - - if (data->aiocb.aio_buf == NULL) { - port_inp_failure(data->port_num, ready_fd, -1); - } - aio_read(&data->aiocb); - } - } - else if (data->packet_bytes && fd_data[data->ifd].remain == 0) { /* we've recieved a header */ - - /* analyze the header FIXME */ - switch (data->packet_bytes) { - case 1: h = get_int8(data->aiocb.aio_buf); break; - case 2: h = get_int16(data->aiocb.aio_buf); break; - case 4: h = get_int32(data->aiocb.aio_buf); break; - } - - fd_data[data->ifd].buf = erts_alloc_fnf(ERTS_ALC_T_FD_ENTRY_BUF, h + data->packet_bytes); - fd_data[data->ifd].remain = ((h + data->packet_bytes) - res); - - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, data->packet_bytes); - - /* issue a new read */ - DISPATCH_AIO(sig); - data->aiocb.aio_nbytes = h; - - if (data->aiocb.aio_buf == NULL) { - port_inp_failure(data->port_num, ready_fd, -1); - } - aio_read(&data->aiocb); - } - } - sig = erl_drv_ose_get_signal(ready_fd); - } -} - - -/* The parameter e is a pointer to the driver_data structure - * related to the fd to be used as output. - * ready_fd is the event that triggered this call to ready_input */ -static void ready_output(ErlDrvData drv_data, ErlDrvEvent ready_fd) -{ - SysIOVec *iov; - int vlen; - int res; - union SIGNAL *sig; - struct driver_data *data = (struct driver_data *)drv_data; - - sig = erl_drv_ose_get_signal(ready_fd); - ASSERT(sig); - - while (sig != NULL) { - if (sig->fm_write_reply.actual <= 0) { - int status; - - status = efs_status_to_errno(sig->fm_write_reply.status); - driver_select(data->port_num, ready_fd, ERL_DRV_WRITE, 0); - DISPATCH_AIO(sig); - FREE_AIO(sig->fm_write_reply.buffer); - - driver_failure_posix(data->port_num, status); - } - else { /* written bytes > 0 */ - iov = driver_peekq(data->port_num, &vlen); - if (vlen > 0) { - DISPATCH_AIO(sig); - FREE_AIO(sig->fm_write_reply.buffer); - res = driver_deq(data->port_num, iov[0].iov_len); - if (res > 0) { - iov = driver_peekq(data->port_num, &vlen); - WRITE_AIO(data->ofd, iov[0].iov_len, iov[0].iov_base); - } - } - else if (vlen == 0) { - DISPATCH_AIO(sig); - FREE_AIO(sig->fm_write_reply.buffer); - } - - } - sig = erl_drv_ose_get_signal(ready_fd); - } -} - -static void stop_select(ErlDrvEvent ready_fd, void* _) -{ - int *fd; - erl_drv_ose_event_fetch(ready_fd, NULL, NULL, (void **)&fd); - erl_drv_ose_event_free(ready_fd); - close(*fd); -} - - -void erts_do_break_handling(void) -{ - struct termios temp_mode; - int saved = 0; - - /* - * Most functions that do_break() calls are intentionally not thread safe; - * therefore, make sure that all threads but this one are blocked before - * proceeding! - */ - erts_smp_thr_progress_block(); - - /* during break we revert to initial settings */ - /* this is done differently for oldshell */ - if (using_oldshell && !replace_intr) { - SET_BLOCKING(1); - } - else if (isatty(0)) { - tcgetattr(0,&temp_mode); - tcsetattr(0,TCSANOW,&initial_tty_mode); - saved = 1; - } - - /* call the break handling function, reset the flag */ - do_break(); - - fflush(stdout); - - /* after break we go back to saved settings */ - if (using_oldshell && !replace_intr) { - SET_NONBLOCKING(1); - } - else if (saved) { - tcsetattr(0,TCSANOW,&temp_mode); - } - - erts_smp_thr_progress_unblock(); -} - -static pid_t -getpid(void) -{ - return get_bid(current_process()); -} - -int getpagesize(void) -{ - return 1024; -} - - -/* Fills in the systems representation of the jam/beam process identifier. -** The Pid is put in STRING representation in the supplied buffer, -** no interpretatione of this should be done by the rest of the -** emulator. The buffer should be at least 21 bytes long. -*/ -void sys_get_pid(char *buffer, size_t buffer_size){ - pid_t p = getpid(); - /* Assume the pid is scalar and can rest in an unsigned long... */ - erts_snprintf(buffer, buffer_size, "%lu",(unsigned long) p); -} - -int -erts_sys_putenv_raw(char *key, char *value) { - return erts_sys_putenv(key, value); -} -int -erts_sys_putenv(char *key, char *value) -{ - int res; - - erts_smp_rwmtx_rwlock(&environ_rwmtx); - res = set_env(get_bid(current_process()), key, - value); - erts_smp_rwmtx_rwunlock(&environ_rwmtx); - return res; -} - - -int -erts_sys_unsetenv(char *key) -{ - int res; - - erts_smp_rwmtx_rwlock(&environ_rwmtx); - res = set_env(get_bid(current_process()),key,NULL); - erts_smp_rwmtx_rwunlock(&environ_rwmtx); - - return res; -} - -int -erts_sys_getenv__(char *key, char *value, size_t *size) -{ - int res; - char *orig_value = get_env(get_bid(current_process()), key); - if (!orig_value) - res = -1; - else { - size_t len = sys_strlen(orig_value); - if (len >= *size) { - *size = len + 1; - res = 1; - } - else { - *size = len; - sys_memcpy((void *) value, (void *) orig_value, len+1); - res = 0; - } - free_buf((union SIGNAL **)&orig_value); - } - return res; -} - -int -erts_sys_getenv_raw(char *key, char *value, size_t *size) { - return erts_sys_getenv(key, value, size); -} - -/* - * erts_sys_getenv - * returns: - * -1, if environment key is not set with a value - * 0, if environment key is set and value fits into buffer res - * 1, if environment key is set but does not fit into buffer res - * res is set with the needed buffer res value - */ - -int -erts_sys_getenv(char *key, char *value, size_t *size) -{ - int res; - erts_smp_rwmtx_rlock(&environ_rwmtx); - res = erts_sys_getenv__(key, value, size); - erts_smp_rwmtx_runlock(&environ_rwmtx); - return res; -} - -void -sys_init_io(void) -{ - fd_data = (struct fd_data *) - erts_alloc(ERTS_ALC_T_FD_TAB, max_files * sizeof(struct fd_data)); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, - max_files * sizeof(struct fd_data)); -} - -extern const char pre_loaded_code[]; -extern Preload pre_loaded[]; - -void erts_sys_alloc_init(void) -{ -} - -void *erts_sys_alloc(ErtsAlcType_t t, void *x, Uint sz) -{ - void *res = malloc((size_t) sz); -#if HAVE_ERTS_MSEG - if (!res) { - erts_mseg_clear_cache(); - return malloc((size_t) sz); - } -#endif - return res; -} - -void *erts_sys_realloc(ErtsAlcType_t t, void *x, void *p, Uint sz) -{ - void *res = realloc(p, (size_t) sz); -#if HAVE_ERTS_MSEG - if (!res) { - erts_mseg_clear_cache(); - return realloc(p, (size_t) sz); - } -#endif - return res; -} - -void erts_sys_free(ErtsAlcType_t t, void *x, void *p) -{ - free(p); -} - -/* Return a pointer to a vector of names of preloaded modules */ - -Preload* -sys_preloaded(void) -{ - return pre_loaded; -} - -/* Return a pointer to preloaded code for module "module" */ -unsigned char* -sys_preload_begin(Preload* p) -{ - return p->code; -} - -/* Clean up if allocated */ -void sys_preload_end(Preload* p) -{ - /* Nothing */ -} - -/* Read a key from console (?) */ - -int sys_get_key(fd) -int fd; -{ - int c; - unsigned char rbuf[64]; - - fflush(stdout); /* Flush query ??? */ - - if ((c = read(fd,rbuf,64)) <= 0) { - return c; - } - - return rbuf[0]; -} - - -#ifdef DEBUG - -extern int erts_initialized; -void -erl_assert_error(const char* expr, const char* func, - const char* file, int line) -{ - fflush(stdout); - fprintf(stderr, "%s:%d:%s() Assertion failed: %s\n", - file, line, func, expr); - fflush(stderr); - ramlog_printf("%s:%d:%s() Assertion failed: %s\n", - file, line, func, expr); - - abort(); -} - -void -erl_debug(char* fmt, ...) -{ - char sbuf[1024]; /* Temporary buffer. */ - va_list va; - - if (debug_log) { - va_start(va, fmt); - vsprintf(sbuf, fmt, va); - va_end(va); - fprintf(stderr, "%s", sbuf); - } -} - -#endif /* DEBUG */ - -static ERTS_INLINE void -report_exit_status(ErtsSysReportExit *rep, int status) -{ - if (rep->ifd >= 0) { - driver_data[rep->ifd].alive = 0; - driver_data[rep->ifd].status = status; - } - if (rep->ofd >= 0) { - driver_data[rep->ofd].alive = 0; - driver_data[rep->ofd].status = status; - } - - erts_free(ERTS_ALC_T_PRT_REP_EXIT, rep); -} - -#define ERTS_REPORT_EXIT_STATUS report_exit_status - -/* - * Called from schedule() when it runs out of runnable processes, - * or when Erlang code has performed INPUT_REDUCTIONS reduction - * steps. runnable == 0 iff there are no runnable Erlang processes. - */ -void -erl_sys_schedule(int runnable) -{ - ASSERT(get_fsem(current_process()) == 0); -#ifdef ERTS_SMP - ASSERT(erts_get_scheduler_data()->no == 1); - ERTS_CHK_IO(!runnable); -#else - ERTS_CHK_IO( 1 ); -#endif - ASSERT(get_fsem(current_process()) == 0); - ERTS_SMP_LC_ASSERT(!erts_thr_progress_is_blocking()); -} - - -#ifdef ERTS_SMP - -void -erts_sys_main_thread(void) -{ - erts_thread_disable_fpe(); - - /* Become signal receiver thread... */ -#ifdef ERTS_ENABLE_LOCK_CHECK - erts_lc_set_thread_name("signal_receiver"); -#endif - - while (1) { - static const SIGSELECT sigsel[] = {0}; - union SIGNAL *msg = receive(sigsel); - - fprintf(stderr,"Main thread got message %d from 0x%x!!\r\n", - msg->sig_no, sender(&msg)); - free_buf(&msg); - } -} - -#endif /* ERTS_SMP */ - -void -erl_sys_args(int* argc, char** argv) -{ - int i, j; - - erts_smp_rwmtx_init(&environ_rwmtx, "environ"); - - init_check_io(); - - /* Handled arguments have been marked with NULL. Slide arguments - not handled towards the beginning of argv. */ - for (i = 0, j = 0; i < *argc; i++) { - if (argv[i]) - argv[j++] = argv[i]; - } - *argc = j; - -} diff --git a/erts/emulator/sys/ose/sys_float.c b/erts/emulator/sys/ose/sys_float.c deleted file mode 100644 index 3d9abc6bd1..0000000000 --- a/erts/emulator/sys/ose/sys_float.c +++ /dev/null @@ -1,845 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2001-2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include "sys.h" -#include "global.h" -#include "erl_process.h" - - -#ifdef NO_FPE_SIGNALS - -void -erts_sys_init_float(void) -{ -# ifdef SIGFPE - sys_sigset(SIGFPE, SIG_IGN); /* Ignore so we can test for NaN and Inf */ -# endif -} - -#else /* !NO_FPE_SIGNALS */ - -#ifdef ERTS_SMP -static erts_tsd_key_t fpe_key; - -/* once-only initialisation early in the main thread (via erts_sys_init_float()) */ -static void erts_init_fp_exception(void) -{ - /* XXX: the wrappers prevent using a pthread destructor to - deallocate the key's value; so when/where do we do that? */ - erts_tsd_key_create(&fpe_key); -} - -void erts_thread_init_fp_exception(void) -{ - unsigned long *fpe = erts_alloc(ERTS_ALC_T_FP_EXCEPTION, sizeof(*fpe)); - *fpe = 0L; - erts_tsd_set(fpe_key, fpe); -} - -static ERTS_INLINE volatile unsigned long *erts_thread_get_fp_exception(void) -{ - return (volatile unsigned long*)erts_tsd_get(fpe_key); -} -#else /* !SMP */ -#define erts_init_fp_exception() /*empty*/ -static volatile unsigned long fp_exception; -#define erts_thread_get_fp_exception() (&fp_exception) -#endif /* SMP */ - -volatile unsigned long *erts_get_current_fp_exception(void) -{ - Process *c_p; - - c_p = erts_get_current_process(); - if (c_p) - return &c_p->fp_exception; - return erts_thread_get_fp_exception(); -} - -static void set_current_fp_exception(unsigned long pc) -{ - volatile unsigned long *fpexnp = erts_get_current_fp_exception(); - ASSERT(fpexnp != NULL); - *fpexnp = pc; -} - -void erts_fp_check_init_error(volatile unsigned long *fpexnp) -{ - char buf[64]; - snprintf(buf, sizeof buf, "ERTS_FP_CHECK_INIT at %p: detected unhandled FPE at %p\r\n", - __builtin_return_address(0), (void*)*fpexnp); - if (write(2, buf, strlen(buf)) <= 0) - erl_exit(ERTS_ABORT_EXIT, "%s", buf); - *fpexnp = 0; -#if defined(__i386__) || defined(__x86_64__) - erts_restore_fpu(); -#endif -} - -/* Is there no standard identifier for Darwin/MacOSX ? */ -#if defined(__APPLE__) && defined(__MACH__) && !defined(__DARWIN__) -#define __DARWIN__ 1 -#endif - -#if (defined(__i386__) || defined(__x86_64__)) && defined(__GNUC__) - -static void unmask_x87(void) -{ - unsigned short cw; - - __asm__ __volatile__("fstcw %0" : "=m"(cw)); - cw &= ~(0x01|0x04|0x08); /* unmask IM, ZM, OM */ - __asm__ __volatile__("fldcw %0" : : "m"(cw)); -} - -/* mask x87 FPE, return true if the previous state was unmasked */ -static int mask_x87(void) -{ - unsigned short cw; - int unmasked; - - __asm__ __volatile__("fstcw %0" : "=m"(cw)); - unmasked = (cw & (0x01|0x04|0x08)) == 0; - /* or just set cw = 0x37f */ - cw |= (0x01|0x04|0x08); /* mask IM, ZM, OM */ - __asm__ __volatile__("fldcw %0" : : "m"(cw)); - return unmasked; -} - -static void unmask_sse2(void) -{ - unsigned int mxcsr; - - __asm__ __volatile__("stmxcsr %0" : "=m"(mxcsr)); - mxcsr &= ~(0x003F|0x0680); /* clear exn flags, unmask OM, ZM, IM (not PM, UM, DM) */ - __asm__ __volatile__("ldmxcsr %0" : : "m"(mxcsr)); -} - -/* mask SSE2 FPE, return true if the previous state was unmasked */ -static int mask_sse2(void) -{ - unsigned int mxcsr; - int unmasked; - - __asm__ __volatile__("stmxcsr %0" : "=m"(mxcsr)); - unmasked = (mxcsr & 0x0680) == 0; - /* or just set mxcsr = 0x1f80 */ - mxcsr &= ~0x003F; /* clear exn flags */ - mxcsr |= 0x0680; /* mask OM, ZM, IM (not PM, UM, DM) */ - __asm__ __volatile__("ldmxcsr %0" : : "m"(mxcsr)); - return unmasked; -} - -#if defined(__x86_64__) - -static inline int cpu_has_sse2(void) { return 1; } - -#else /* !__x86_64__ */ - -/* - * Check if an x86-32 processor has SSE2. - */ -static unsigned int xor_eflags(unsigned int mask) -{ - unsigned int eax, edx; - - eax = mask; /* eax = mask */ - __asm__("pushfl\n\t" - "popl %0\n\t" /* edx = original EFLAGS */ - "xorl %0, %1\n\t" /* eax = mask ^ EFLAGS */ - "pushl %1\n\t" - "popfl\n\t" /* new EFLAGS = mask ^ original EFLAGS */ - "pushfl\n\t" - "popl %1\n\t" /* eax = new EFLAGS */ - "xorl %0, %1\n\t" /* eax = new EFLAGS ^ old EFLAGS */ - "pushl %0\n\t" - "popfl" /* restore original EFLAGS */ - : "=d"(edx), "=a"(eax) - : "1"(eax)); - return eax; -} - -static __inline__ unsigned int cpuid_eax(unsigned int op) -{ - unsigned int eax, save_ebx; - - /* In PIC mode i386 reserves EBX. So we must save - and restore it ourselves to not upset gcc. */ - __asm__( - "movl %%ebx, %1\n\t" - "cpuid\n\t" - "movl %1, %%ebx" - : "=a"(eax), "=m"(save_ebx) - : "0"(op) - : "cx", "dx"); - return eax; -} - -static __inline__ unsigned int cpuid_edx(unsigned int op) -{ - unsigned int eax, edx, save_ebx; - - /* In PIC mode i386 reserves EBX. So we must save - and restore it ourselves to not upset gcc. */ - __asm__( - "movl %%ebx, %2\n\t" - "cpuid\n\t" - "movl %2, %%ebx" - : "=a"(eax), "=d"(edx), "=m"(save_ebx) - : "0"(op) - : "cx"); - return edx; -} - -/* The AC bit, bit #18, is a new bit introduced in the EFLAGS - * register on the Intel486 processor to generate alignment - * faults. This bit cannot be set on the Intel386 processor. - */ -static __inline__ int is_386(void) -{ - return ((xor_eflags(1<<18) >> 18) & 1) == 0; -} - -/* Newer x86 processors have a CPUID instruction, as indicated by - * the ID bit (#21) in EFLAGS being modifiable. - */ -static __inline__ int has_CPUID(void) -{ - return (xor_eflags(1<<21) >> 21) & 1; -} - -static int cpu_has_sse2(void) -{ - unsigned int maxlev, features; - static int has_sse2 = -1; - - if (has_sse2 >= 0) - return has_sse2; - has_sse2 = 0; - - if (is_386()) - return 0; - if (!has_CPUID()) - return 0; - maxlev = cpuid_eax(0); - /* Intel A-step Pentium had a preliminary version of CPUID. - It also didn't have SSE2. */ - if ((maxlev & 0xFFFFFF00) == 0x0500) - return 0; - /* If max level is zero then CPUID cannot report any features. */ - if (maxlev == 0) - return 0; - features = cpuid_edx(1); - has_sse2 = (features & (1 << 26)) != 0; - - return has_sse2; -} -#endif /* !__x86_64__ */ - -static void unmask_fpe(void) -{ - __asm__ __volatile__("fnclex"); - unmask_x87(); - if (cpu_has_sse2()) - unmask_sse2(); -} - -static void unmask_fpe_conditional(int unmasked) -{ - if (unmasked) - unmask_fpe(); -} - -/* mask x86 FPE, return true if the previous state was unmasked */ -static int mask_fpe(void) -{ - int unmasked; - - unmasked = mask_x87(); - if (cpu_has_sse2()) - unmasked |= mask_sse2(); - return unmasked; -} - -void erts_restore_fpu(void) -{ - __asm__ __volatile__("fninit"); - unmask_x87(); - if (cpu_has_sse2()) - unmask_sse2(); -} - -#elif defined(__sparc__) && defined(__linux__) - -#if defined(__arch64__) -#define LDX "ldx" -#define STX "stx" -#else -#define LDX "ld" -#define STX "st" -#endif - -static void unmask_fpe(void) -{ - unsigned long fsr; - - __asm__(STX " %%fsr, %0" : "=m"(fsr)); - fsr &= ~(0x1FUL << 23); /* clear FSR[TEM] field */ - fsr |= (0x1AUL << 23); /* enable NV, OF, DZ exceptions */ - __asm__ __volatile__(LDX " %0, %%fsr" : : "m"(fsr)); -} - -static void unmask_fpe_conditional(int unmasked) -{ - if (unmasked) - unmask_fpe(); -} - -/* mask SPARC FPE, return true if the previous state was unmasked */ -static int mask_fpe(void) -{ - unsigned long fsr; - int unmasked; - - __asm__(STX " %%fsr, %0" : "=m"(fsr)); - unmasked = ((fsr >> 23) & 0x1A) == 0x1A; - fsr &= ~(0x1FUL << 23); /* clear FSR[TEM] field */ - __asm__ __volatile__(LDX " %0, %%fsr" : : "m"(fsr)); - return unmasked; -} - -#elif (defined(__powerpc__) && defined(__linux__)) || (defined(__ppc__) && defined(__DARWIN__)) - -#if defined(__linux__) -#include <sys/prctl.h> - -static void set_fpexc_precise(void) -{ - if (prctl(PR_SET_FPEXC, PR_FP_EXC_PRECISE) < 0) { - perror("PR_SET_FPEXC"); - exit(1); - } -} - -#elif defined(__DARWIN__) - -#include <mach/mach.h> -#include <pthread.h> - -/* - * FE0 FE1 MSR bits - * 0 0 floating-point exceptions disabled - * 0 1 floating-point imprecise nonrecoverable - * 1 0 floating-point imprecise recoverable - * 1 1 floating-point precise mode - * - * Apparently: - * - Darwin 5.5 (MacOS X <= 10.1) starts with FE0 == FE1 == 0, - * and resets FE0 and FE1 to 0 after each SIGFPE. - * - Darwin 6.0 (MacOS X 10.2) starts with FE0 == FE1 == 1, - * and does not reset FE0 or FE1 after a SIGFPE. - */ -#define FE0_MASK (1<<11) -#define FE1_MASK (1<<8) - -/* a thread cannot get or set its own MSR bits */ -static void *fpu_fpe_enable(void *arg) -{ - thread_t t = *(thread_t*)arg; - struct ppc_thread_state state; - unsigned int state_size = PPC_THREAD_STATE_COUNT; - - if (thread_get_state(t, PPC_THREAD_STATE, (natural_t*)&state, &state_size) != KERN_SUCCESS) { - perror("thread_get_state"); - exit(1); - } - if ((state.srr1 & (FE1_MASK|FE0_MASK)) != (FE1_MASK|FE0_MASK)) { -#if 1 - /* This would also have to be performed in the SIGFPE handler - to work around the MSR reset older Darwin releases do. */ - state.srr1 |= (FE1_MASK|FE0_MASK); - thread_set_state(t, PPC_THREAD_STATE, (natural_t*)&state, state_size); -#else - fprintf(stderr, "srr1 == 0x%08x, your Darwin is too old\n", state.srr1); - exit(1); -#endif - } - return NULL; /* Ok, we appear to be on Darwin 6.0 or later */ -} - -static void set_fpexc_precise(void) -{ - thread_t self = mach_thread_self(); - pthread_t enabler; - - if (pthread_create(&enabler, NULL, fpu_fpe_enable, &self)) { - perror("pthread_create"); - } else if (pthread_join(enabler, NULL)) { - perror("pthread_join"); - } -} - -#endif - -static void set_fpscr(unsigned int fpscr) -{ - union { - double d; - unsigned int fpscr[2]; - } u; - - u.fpscr[0] = 0xFFF80000; - u.fpscr[1] = fpscr; - __asm__ __volatile__("mtfsf 255,%0" : : "f"(u.d)); -} - -static unsigned int get_fpscr(void) -{ - union { - double d; - unsigned int fpscr[2]; - } u; - - __asm__("mffs %0" : "=f"(u.d)); - return u.fpscr[1]; -} - -static void unmask_fpe(void) -{ - set_fpexc_precise(); - set_fpscr(0x80|0x40|0x10); /* VE, OE, ZE; not UE or XE */ -} - -static void unmask_fpe_conditional(int unmasked) -{ - if (unmasked) - unmask_fpe(); -} - -/* mask PowerPC FPE, return true if the previous state was unmasked */ -static int mask_fpe(void) -{ - int unmasked; - - unmasked = (get_fpscr() & (0x80|0x40|0x10)) == (0x80|0x40|0x10); - set_fpscr(0x00); - return unmasked; -} - -#else - -static void unmask_fpe(void) -{ - fpsetmask(FP_X_INV | FP_X_OFL | FP_X_DZ); -} - -static void unmask_fpe_conditional(int unmasked) -{ - if (unmasked) - unmask_fpe(); -} - -/* mask IEEE FPE, return true if previous state was unmasked */ -static int mask_fpe(void) -{ - const fp_except unmasked_mask = FP_X_INV | FP_X_OFL | FP_X_DZ; - fp_except old_mask; - - old_mask = fpsetmask(0); - return (old_mask & unmasked_mask) == unmasked_mask; -} - -#endif - -#if (defined(__linux__) && (defined(__i386__) || defined(__x86_64__) || defined(__sparc__) || defined(__powerpc__))) || (defined(__DARWIN__) && (defined(__i386__) || defined(__x86_64__) || defined(__ppc__))) || (defined(__FreeBSD__) && (defined(__x86_64__) || defined(__i386__))) || ((defined(__NetBSD__) || defined(__OpenBSD__)) && defined(__x86_64__)) || (defined(__sun__) && defined(__x86_64__)) - -#if defined(__linux__) && defined(__i386__) -#if !defined(X86_FXSR_MAGIC) -#define X86_FXSR_MAGIC 0x0000 -#endif -#elif defined(__FreeBSD__) && defined(__x86_64__) -#include <sys/types.h> -#include <machine/fpu.h> -#elif defined(__FreeBSD__) && defined(__i386__) -#include <sys/types.h> -#include <machine/npx.h> -#elif defined(__DARWIN__) -#include <machine/signal.h> -#elif defined(__OpenBSD__) && defined(__x86_64__) -#include <sys/types.h> -#include <machine/fpu.h> -#endif -#if !(defined(__OpenBSD__) && defined(__x86_64__)) -#include <ucontext.h> -#endif -#include <string.h> - -#if defined(__linux__) && defined(__x86_64__) -#define mc_pc(mc) ((mc)->gregs[REG_RIP]) -#elif defined(__linux__) && defined(__i386__) -#define mc_pc(mc) ((mc)->gregs[REG_EIP]) -#elif defined(__DARWIN__) && defined(__i386__) -#ifdef DARWIN_MODERN_MCONTEXT -#define mc_pc(mc) ((mc)->__ss.__eip) -#else -#define mc_pc(mc) ((mc)->ss.eip) -#endif -#elif defined(__DARWIN__) && defined(__x86_64__) -#ifdef DARWIN_MODERN_MCONTEXT -#define mc_pc(mc) ((mc)->__ss.__rip) -#else -#define mc_pc(mc) ((mc)->ss.rip) -#endif -#elif defined(__FreeBSD__) && defined(__x86_64__) -#define mc_pc(mc) ((mc)->mc_rip) -#elif defined(__FreeBSD__) && defined(__i386__) -#define mc_pc(mc) ((mc)->mc_eip) -#elif defined(__NetBSD__) && defined(__x86_64__) -#define mc_pc(mc) ((mc)->__gregs[_REG_RIP]) -#elif defined(__NetBSD__) && defined(__i386__) -#define mc_pc(mc) ((mc)->__gregs[_REG_EIP]) -#elif defined(__OpenBSD__) && defined(__x86_64__) -#define mc_pc(mc) ((mc)->sc_rip) -#elif defined(__sun__) && defined(__x86_64__) -#define mc_pc(mc) ((mc)->gregs[REG_RIP]) -#endif - -static void fpe_sig_action(int sig, siginfo_t *si, void *puc) -{ - ucontext_t *uc = puc; - unsigned long pc; - -#if defined(__linux__) -#if defined(__x86_64__) - mcontext_t *mc = &uc->uc_mcontext; - fpregset_t fpstate = mc->fpregs; - pc = mc_pc(mc); - /* A failed SSE2 instruction will restart. To avoid - looping we mask SSE2 exceptions now and unmask them - again later in erts_check_fpe()/erts_restore_fpu(). - On RISCs we update PC to skip the failed instruction, - but the ever increasing complexity of the x86 instruction - set encoding makes that a poor solution here. */ - fpstate->mxcsr = 0x1F80; - fpstate->swd &= ~0xFF; -#elif defined(__i386__) - mcontext_t *mc = &uc->uc_mcontext; - fpregset_t fpstate = mc->fpregs; - pc = mc_pc(mc); - if ((fpstate->status >> 16) == X86_FXSR_MAGIC) - ((struct _fpstate*)fpstate)->mxcsr = 0x1F80; - fpstate->sw &= ~0xFF; -#elif defined(__sparc__) && defined(__arch64__) - /* on SPARC the 3rd parameter points to a sigcontext not a ucontext */ - struct sigcontext *sc = (struct sigcontext*)puc; - pc = sc->sigc_regs.tpc; - sc->sigc_regs.tpc = sc->sigc_regs.tnpc; - sc->sigc_regs.tnpc += 4; -#elif defined(__sparc__) - /* on SPARC the 3rd parameter points to a sigcontext not a ucontext */ - struct sigcontext *sc = (struct sigcontext*)puc; - pc = sc->si_regs.pc; - sc->si_regs.pc = sc->si_regs.npc; - sc->si_regs.npc = (unsigned long)sc->si_regs.npc + 4; -#elif defined(__powerpc__) -#if defined(__powerpc64__) - mcontext_t *mc = &uc->uc_mcontext; - unsigned long *regs = &mc->gp_regs[0]; -#else - mcontext_t *mc = uc->uc_mcontext.uc_regs; - unsigned long *regs = &mc->gregs[0]; -#endif - pc = regs[PT_NIP]; - regs[PT_NIP] += 4; - regs[PT_FPSCR] = 0x80|0x40|0x10; /* VE, OE, ZE; not UE or XE */ -#endif -#elif defined(__DARWIN__) && (defined(__i386__) || defined(__x86_64__)) -#ifdef DARWIN_MODERN_MCONTEXT - mcontext_t mc = uc->uc_mcontext; - pc = mc_pc(mc); - mc->__fs.__fpu_mxcsr = 0x1F80; - *(unsigned short *)&mc->__fs.__fpu_fsw &= ~0xFF; -#else - mcontext_t mc = uc->uc_mcontext; - pc = mc_pc(mc); - mc->fs.fpu_mxcsr = 0x1F80; - *(unsigned short *)&mc->fs.fpu_fsw &= ~0xFF; -#endif /* DARWIN_MODERN_MCONTEXT */ -#elif defined(__DARWIN__) && defined(__ppc__) - mcontext_t mc = uc->uc_mcontext; - pc = mc->ss.srr0; - mc->ss.srr0 += 4; - mc->fs.fpscr = 0x80|0x40|0x10; -#elif defined(__FreeBSD__) && defined(__x86_64__) - mcontext_t *mc = &uc->uc_mcontext; - struct savefpu *savefpu = (struct savefpu*)&mc->mc_fpstate; - struct envxmm *envxmm = &savefpu->sv_env; - pc = mc_pc(mc); - envxmm->en_mxcsr = 0x1F80; - envxmm->en_sw &= ~0xFF; -#elif defined(__FreeBSD__) && defined(__i386__) - mcontext_t *mc = &uc->uc_mcontext; - union savefpu *savefpu = (union savefpu*)&mc->mc_fpstate; - pc = mc_pc(mc); - if (mc->mc_fpformat == _MC_FPFMT_XMM) { - struct envxmm *envxmm = &savefpu->sv_xmm.sv_env; - envxmm->en_mxcsr = 0x1F80; - envxmm->en_sw &= ~0xFF; - } else { - struct env87 *env87 = &savefpu->sv_87.sv_env; - env87->en_sw &= ~0xFF; - } -#elif defined(__NetBSD__) && defined(__x86_64__) - mcontext_t *mc = &uc->uc_mcontext; - struct fxsave64 *fxsave = (struct fxsave64 *)&mc->__fpregs; - pc = mc_pc(mc); - fxsave->fx_mxcsr = 0x1F80; - fxsave->fx_fsw &= ~0xFF; -#elif defined(__NetBSD__) && defined(__i386__) - mcontext_t *mc = &uc->uc_mcontext; - pc = mc_pc(mc); - if (uc->uc_flags & _UC_FXSAVE) { - struct envxmm *envxmm = (struct envxmm *)&mc->__fpregs; - envxmm->en_mxcsr = 0x1F80; - envxmm->en_sw &= ~0xFF; - } else { - struct env87 *env87 = (struct env87 *)&mc->__fpregs; - env87->en_sw &= ~0xFF; - } -#elif defined(__OpenBSD__) && defined(__x86_64__) - struct fxsave64 *fxsave = uc->sc_fpstate; - pc = mc_pc(uc); - fxsave->fx_mxcsr = 0x1F80; - fxsave->fx_fsw &= ~0xFF; -#elif defined(__sun__) && defined(__x86_64__) - mcontext_t *mc = &uc->uc_mcontext; - struct fpchip_state *fpstate = &mc->fpregs.fp_reg_set.fpchip_state; - pc = mc_pc(mc); - fpstate->mxcsr = 0x1F80; - fpstate->sw &= ~0xFF; -#endif -#if 0 - { - char buf[64]; - snprintf(buf, sizeof buf, "%s: FPE at %p\r\n", __FUNCTION__, (void*)pc); - write(2, buf, strlen(buf)); - } -#endif - set_current_fp_exception(pc); -} - -static void erts_thread_catch_fp_exceptions(void) -{ - struct sigaction act; - memset(&act, 0, sizeof act); - act.sa_sigaction = fpe_sig_action; - act.sa_flags = SA_SIGINFO; - sigaction(SIGFPE, &act, NULL); - unmask_fpe(); -} - -#else /* !((__linux__ && (__i386__ || __x86_64__ || __powerpc__)) || (__DARWIN__ && (__i386__ || __x86_64__ || __ppc__))) */ - -static void fpe_sig_handler(int sig) -{ - set_current_fp_exception(1); /* XXX: convert to sigaction so we can get the trap PC */ -} - -static void erts_thread_catch_fp_exceptions(void) -{ - sys_sigset(SIGFPE, fpe_sig_handler); - unmask_fpe(); -} - -#endif /* (__linux__ && (__i386__ || __x86_64__ || __powerpc__)) || (__DARWIN__ && (__i386__ || __x86_64__ || __ppc__))) */ - -/* once-only initialisation early in the main thread */ -void erts_sys_init_float(void) -{ - erts_init_fp_exception(); - erts_thread_catch_fp_exceptions(); - erts_printf_block_fpe = erts_sys_block_fpe; - erts_printf_unblock_fpe = erts_sys_unblock_fpe; -} - -#endif /* NO_FPE_SIGNALS */ - -void erts_thread_init_float(void) -{ -#ifdef ERTS_SMP - /* This allows Erlang schedulers to leave Erlang-process context - and still have working FP exceptions. XXX: is this needed? */ - erts_thread_init_fp_exception(); -#endif - -#ifndef NO_FPE_SIGNALS - /* NOTE: - * erts_thread_disable_fpe() is called in all threads at - * creation. We at least need to call unmask_fpe() - */ -#if defined(__DARWIN__) || defined(__FreeBSD__) - /* Darwin (7.9.0) does not appear to propagate FP exception settings - to a new thread from its parent. So if we want FP exceptions, we - must manually re-enable them in each new thread. - FreeBSD 6.1 appears to suffer from a similar issue. */ - erts_thread_catch_fp_exceptions(); -#else - unmask_fpe(); -#endif - -#endif -} - -void erts_thread_disable_fpe(void) -{ -#if !defined(NO_FPE_SIGNALS) - (void)mask_fpe(); -#endif -} - -#if !defined(NO_FPE_SIGNALS) -int erts_sys_block_fpe(void) -{ - return mask_fpe(); -} - -void erts_sys_unblock_fpe(int unmasked) -{ - unmask_fpe_conditional(unmasked); -} -#endif - -/* The following check is incorporated from the Vee machine */ - -#define ISDIGIT(d) ((d) >= '0' && (d) <= '9') - -/* - ** Convert a double to ascii format 0.dddde[+|-]ddd - ** return number of characters converted or -1 if error. - ** - ** These two functions should maybe use localeconv() to pick up - ** the current radix character, but since it is uncertain how - ** expensive such a system call is, and since no-one has heard - ** of other radix characters than '.' and ',' an ad-hoc - ** low execution time solution is used instead. - */ - -int -sys_double_to_chars_ext(double fp, char *buffer, size_t buffer_size, size_t decimals) -{ - char *s = buffer; - - if (erts_snprintf(buffer, buffer_size, "%.*e", decimals, fp) >= buffer_size) - return -1; - /* Search upto decimal point */ - if (*s == '+' || *s == '-') s++; - while (ISDIGIT(*s)) s++; - if (*s == ',') *s++ = '.'; /* Replace ',' with '.' */ - /* Scan to end of string */ - while (*s) s++; - return s-buffer; /* i.e strlen(buffer) */ -} - -/* Float conversion */ - -int -sys_chars_to_double(char* buf, double* fp) -{ -#ifndef NO_FPE_SIGNALS - volatile unsigned long *fpexnp = erts_get_current_fp_exception(); -#endif - char *s = buf, *t, *dp; - - /* Robert says that something like this is what he really wanted: - * (The [.,] radix test is NOT what Robert wanted - it was added later) - * - * 7 == sscanf(Tbuf, "%[+-]%[0-9][.,]%[0-9]%[eE]%[+-]%[0-9]%s", ....); - * if (*s2 == 0 || *s3 == 0 || *s4 == 0 || *s6 == 0 || *s7) - * break; - */ - - /* Scan string to check syntax. */ - if (*s == '+' || *s == '-') s++; - if (!ISDIGIT(*s)) /* Leading digits. */ - return -1; - while (ISDIGIT(*s)) s++; - if (*s != '.' && *s != ',') /* Decimal part. */ - return -1; - dp = s++; /* Remember decimal point pos just in case */ - if (!ISDIGIT(*s)) - return -1; - while (ISDIGIT(*s)) s++; - if (*s == 'e' || *s == 'E') { - /* There is an exponent. */ - s++; - if (*s == '+' || *s == '-') s++; - if (!ISDIGIT(*s)) - return -1; - while (ISDIGIT(*s)) s++; - } - if (*s) /* That should be it */ - return -1; - -#ifdef NO_FPE_SIGNALS - errno = 0; -#endif - __ERTS_FP_CHECK_INIT(fpexnp); - *fp = strtod(buf, &t); - __ERTS_FP_ERROR_THOROUGH(fpexnp, *fp, return -1); - if (t != s) { /* Whole string not scanned */ - /* Try again with other radix char */ - *dp = (*dp == '.') ? ',' : '.'; - errno = 0; - __ERTS_FP_CHECK_INIT(fpexnp); - *fp = strtod(buf, &t); - __ERTS_FP_ERROR_THOROUGH(fpexnp, *fp, return -1); - } - -#ifdef NO_FPE_SIGNALS - if (errno == ERANGE) { - if (*fp == HUGE_VAL || *fp == -HUGE_VAL) { - /* overflow, should give error */ - return -1; - } else if (t == s && *fp == 0.0) { - /* This should give 0.0 - OTP-7178 */ - errno = 0; - - } else if (*fp == 0.0) { - return -1; - } - } -#endif - return 0; -} - -int -matherr(struct exception *exc) -{ -#if !defined(NO_FPE_SIGNALS) - volatile unsigned long *fpexnp = erts_get_current_fp_exception(); - if (fpexnp != NULL) - *fpexnp = (unsigned long)__builtin_return_address(0); -#endif - return 1; -} diff --git a/erts/emulator/sys/ose/sys_time.c b/erts/emulator/sys/ose/sys_time.c deleted file mode 100644 index 5dac75956a..0000000000 --- a/erts/emulator/sys/ose/sys_time.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2005-2009. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include "sys.h" -#include "global.h" - -/******************* Routines for time measurement *********************/ - -int erts_ticks_per_sec = 0; /* Will be SYS_CLK_TCK in erl_unix_sys.h */ - -int sys_init_time(void) -{ - return SYS_CLOCK_RESOLUTION; -} - -clock_t sys_times(SysTimes *now) { - now->tms_utime = now->tms_stime = now->tms_cutime = now->tms_cstime = 0; - return 0; -} - -static OSTICK last_tick_count = 0; -static SysHrTime wrap = 0; -static OSTICK us_per_tick; - -void sys_init_hrtime() { - us_per_tick = system_tick(); -} - -SysHrTime sys_gethrtime() { - OSTICK ticks = get_ticks(); - if (ticks < (SysHrTime) last_tick_count) { - wrap += 1ULL << 32; - } - last_tick_count = ticks; - return ((((SysHrTime) ticks) + wrap) * 1000*us_per_tick); -} diff --git a/erts/emulator/test/emulator.spec.ose b/erts/emulator/test/emulator.spec.ose deleted file mode 100644 index 9f494609d9..0000000000 --- a/erts/emulator/test/emulator.spec.ose +++ /dev/null @@ -1,2 +0,0 @@ -{topcase, {dir, "../emulator_test"}}. -{skip, {obsolete_SUITE, "Not on ose"}}. diff --git a/erts/epmd/src/Makefile.in b/erts/epmd/src/Makefile.in index b6e3ba7762..1266be44cb 100644 --- a/erts/epmd/src/Makefile.in +++ b/erts/epmd/src/Makefile.in @@ -19,10 +19,6 @@ # include $(ERL_TOP)/make/target.mk -ifeq ($(findstring ose,$(TARGET)),ose) -include $(ERL_TOP)/make/$(TARGET)/ose_lm.mk -endif - ifeq ($(TYPE),debug) PURIFY = TYPEMARKER = .debug @@ -32,21 +28,13 @@ else ifeq ($(TYPE),purify) PURIFY = purify TYPEMARKER = -ifeq ($(findstring ose,$(TARGET)),ose) - TYPE_FLAGS = -DPURIFY -else - TYPE_FLAGS = -O2 -DPURIFY -endif +TYPE_FLAGS = -O2 -DPURIFY else override TYPE = opt PURIFY = TYPEMARKER = -ifeq ($(findstring ose,$(TARGET)),ose) - TYPE_FLAGS = -else - TYPE_FLAGS = -O2 -endif +TYPE_FLAGS = -O2 endif endif @@ -68,13 +56,9 @@ else ifeq ($(findstring vxworks,$(TARGET)),vxworks) ERTS_INTERNAL_LIBS=-L../../lib/internal/$(TARGET) -lerts_internal$(ERTS_LIB_TYPEMARKER) @ERTS_INTERNAL_X_LIBS@ else -ifeq ($(findstring ose,$(TARGET)),ose) -ERTS_INTERNAL_LIBS=-L../../lib/internal/$(TARGET) -lerts_internal$(ERTS_LIB_TYPEMARKER) @ERTS_INTERNAL_X_LIBS@ -else ERTS_INTERNAL_LIBS=-L../../lib/internal/$(TARGET) -lerts_internal$(ERTS_LIB_TYPEMARKER) @ERTS_INTERNAL_X_LIBS@ -lm endif endif -endif ERTS_LIB = $(ERL_TOP)/erts/lib_src/obj/$(TARGET)/$(TYPE)/MADE @@ -82,11 +66,7 @@ CC = @CC@ WFLAGS = @WFLAGS@ CFLAGS = @CFLAGS@ @DEFS@ $(TYPE_FLAGS) $(WFLAGS) $(ERTS_INCL) LD = @LD@ -ifeq ($(findstring ose,$(TARGET)),ose) -LIBS = $(ERTS_INTERNAL_LIBS) @LIBS@ -else LIBS = @LIBS@ @SYSTEMD_DAEMON_LIBS@ $(ERTS_INTERNAL_LIBS) -endif LDFLAGS = @LDFLAGS@ @@ -135,25 +115,12 @@ clean: rm -f *.o rm -f *~ core -ifeq ($(findstring ose,$(TARGET)),ose) -$(OBJDIR)/ose_confd.o: $(OSE_CONFD) - $(V_CC) $(CFLAGS) -o $@ -c $< -$(OBJDIR)/crt0_lm.o: $(CRT0_LM) - $(V_CC) $(CFLAGS) -o $@ -c $< -OSE_LM_OBJS += $(OBJDIR)/ose_confd.o $(OBJDIR)/crt0_lm.o -endif - # # Objects & executables # -ifeq ($(findstring ose,$(TARGET)),ose) -$(BINDIR)/$(EPMD): $(EPMD_OBJS) $(ERTS_LIB) $(OSE_LM_OBJS) - $(call build-ose-load-module, $@, $(EPMD_OBJS) $(OSE_LM_OBJS), $(LIBS), $(EPMD_LMCONF)) -else $(BINDIR)/$(EPMD): $(EPMD_OBJS) $(ERTS_LIB) $(ld_verbose)$(PURIFY) $(LD) $(LDFLAGS) -o $@ $(EPMD_OBJS) $(LIBS) -endif $(OBJDIR)/%.o: %.c epmd.h epmd_int.h $(V_CC) $(CFLAGS) $(EPMD_FLAGS) -o $@ -c $< diff --git a/erts/epmd/src/epmd.c b/erts/epmd/src/epmd.c index 132bda725c..7c373509be 100644 --- a/erts/epmd/src/epmd.c +++ b/erts/epmd/src/epmd.c @@ -397,7 +397,7 @@ static void run_daemon(EpmdVars *g) } #endif -#if defined(VXWORKS) || defined(__OSE__) +#if defined(VXWORKS) static void run_daemon(EpmdVars *g) { run(g); diff --git a/erts/epmd/src/epmd_int.h b/erts/epmd/src/epmd_int.h index 26100afc93..e222abb4b7 100644 --- a/erts/epmd/src/epmd_int.h +++ b/erts/epmd/src/epmd_int.h @@ -37,13 +37,6 @@ #define DONT_USE_MAIN #endif -#ifdef __OSE__ -# define NO_DAEMON -# define NO_SYSLOG -# define NO_SYSCONF -# define NO_FCNTL -#endif - /* ************************************************************************ */ /* Standard includes */ @@ -100,12 +93,7 @@ #endif /* ! WIN32 */ #include <ctype.h> - -#if !defined(__OSE__) -# include <signal.h> -#endif - - +#include <signal.h> #include <errno.h> #ifdef HAVE_SYSLOG_H @@ -122,10 +110,6 @@ #include <stdarg.h> -#ifdef __OSE__ -# include "sys/select.h" -#endif - #ifdef HAVE_SYSTEMD_DAEMON # include <systemd/sd-daemon.h> #endif /* HAVE_SYSTEMD_DAEMON */ diff --git a/erts/epmd/src/epmd_srv.c b/erts/epmd/src/epmd_srv.c index 8c8d7304f2..829eb4c74d 100644 --- a/erts/epmd/src/epmd_srv.c +++ b/erts/epmd/src/epmd_srv.c @@ -30,11 +30,6 @@ # define INADDR_NONE 0xffffffff #endif -#if defined(__OSE__) -# include "sys/ioctl.h" -# define sleep(x) delay(x*1000) -#endif - /* * * This server is a local name server for Erlang nodes. Erlang nodes can @@ -315,7 +310,7 @@ void run(EpmdVars *g) } #endif /* HAVE_SYSTEMD_DAEMON */ -#if !defined(__WIN32__) && !defined(__OSE__) +#if !defined(__WIN32__) /* We ignore the SIGPIPE signal that is raised when we call write twice on a socket closed by the other end. */ signal(SIGPIPE, SIG_IGN); diff --git a/erts/etc/common/Makefile.in b/erts/etc/common/Makefile.in index 8e55fa78c9..05d925f19f 100644 --- a/erts/etc/common/Makefile.in +++ b/erts/etc/common/Makefile.in @@ -21,10 +21,6 @@ include $(ERL_TOP)/make/output.mk include $(ERL_TOP)/make/target.mk -ifeq ($(findstring ose,$(TARGET)),ose) -include $(ERL_TOP)/make/$(TARGET)/ose_lm.mk -endif - ERTS_LIB_TYPEMARKER=.$(TYPE) USING_MINGW=@MIXED_CYGWIN_MINGW@ @@ -85,18 +81,13 @@ EMUOSDIR = $(ERL_TOP)/erts/emulator/@ERLANG_OSTYPE@ SYSDIR = $(ERL_TOP)/erts/emulator/sys/@ERLANG_OSTYPE@ DRVDIR = $(ERL_TOP)/erts/emulator/drivers/@ERLANG_OSTYPE@ UXETC = ../unix -OSEETC = ../ose WINETC = ../win32 ifeq ($(TARGET), win32) ETC = $(WINETC) else -ifeq ($(findstring ose,$(TARGET)),ose) -ETC = $(OSEETC) -else ETC = $(UXETC) endif -endif ifeq ($(TARGET), win32) ERLEXEC = erlexec.dll @@ -180,25 +171,6 @@ PORT_ENTRY_POINT=erl_port_entry ENTRY_LDFLAGS=-entry:$(PORT_ENTRY_POINT) else -ifeq ($(findstring ose,$(TARGET)),ose) -ENTRY_LDFLAGS= -ENTRY_OBJ= -ERLSRV_OBJECTS= -MC_OUTPUTS= -INET_GETHOST = -INSTALL_EMBEDDED_PROGS = $(BINDIR)/run_erl_lm -INSTALL_EMBEDDED_DATA = -INSTALL_TOP = Install -INSTALL_TOP_BIN = -INSTALL_MISC = -INSTALL_SRC = -ERLEXECDIR = . -INSTALL_LIBS = -INSTALL_OBJS = -INSTALL_INCLUDES = -TEXTFILES = Install erl.src -INSTALL_PROGS = $(INSTALL_EMBEDDED_PROGS) -else # UNIX (!win32 && !ose) ENTRY_LDFLAGS= ENTRY_OBJ= ERLSRV_OBJECTS= @@ -223,7 +195,6 @@ INSTALL_PROGS = \ $(BINDIR)/$(ERLEXEC) \ $(INSTALL_EMBEDDED_PROGS) endif -endif .PHONY: etc etc: $(ENTRY_OBJ) $(INSTALL_PROGS) $(INSTALL_LIBS) $(TEXTFILES) $(INSTALL_TOP_BIN) @@ -269,8 +240,8 @@ endif rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/to_erl.o rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/dyn_erl.o rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/safe_string.o - rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/run_erl_common.o - rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/to_erl_common.o + rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/run_erl.o + rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/to_erl.o rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/typer.o rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/ct_run.o rm -f $(ERL_TOP)/erts/obj*/$(TARGET)/vxcall.o @@ -423,28 +394,24 @@ $(BINDIR)/inet_gethost@EXEEXT@: $(OBJDIR)/inet_gethost.o $(ENTRY_OBJ) $(ERTS_LIB $(ld_verbose)$(PURIFY) $(LD) $(LDFLAGS) $(ENTRY_LDFLAGS) -o $@ $(OBJDIR)/inet_gethost.o $(ENTRY_OBJ) $(LIBS) $(ERTS_INTERNAL_LIBS) # run_erl -$(BINDIR)/run_erl: $(OBJDIR)/safe_string.o $(OBJDIR)/run_erl.o $(OBJDIR)/run_erl_common.o - $(V_LD) $(LDFLAGS) -o $@ $^ $(LIBS) -$(OBJDIR)/run_erl.o: $(ETC)/run_erl.c ../common/run_erl_common.h $(RC_GENERATED) - $(V_CC) $(CFLAGS) -I ../common/ -o $@ -c $(ETC)/run_erl.c -$(OBJDIR)/run_erl_common.o: ../common/run_erl_common.c ../common/run_erl_common.h $(RC_GENERATED) - $(V_CC) $(CFLAGS) -o $@ -c $< +$(BINDIR)/run_erl: $(OBJDIR)/safe_string.o $(OBJDIR)/run_erl.o + $(V_LD) $(LDFLAGS) -o $@ $(OBJDIR)/safe_string.o $(OBJDIR)/run_erl.o $(LIBS) +$(OBJDIR)/run_erl.o: $(ETC)/run_erl.c $(RC_GENERATED) + $(V_CC) $(CFLAGS) -o $@ -c $(ETC)/run_erl.c # to_erl -$(BINDIR)/to_erl: $(OBJDIR)/safe_string.o $(OBJDIR)/to_erl.o $(OBJDIR)/to_erl_common.o - $(V_LD) $(LDFLAGS) -o $@ $^ -$(OBJDIR)/to_erl.o: $(ETC)/to_erl.c ../common/safe_string.h $(RC_GENERATED) - $(V_CC) $(CFLAGS) -I ../common/ -o $@ -c $(ETC)/to_erl.c -$(OBJDIR)/to_erl_common.o: ../common/to_erl_common.c ../common/to_erl_common.h $(RC_GENERATED) - $(V_CC) $(CFLAGS) -o $@ -c $< +$(BINDIR)/to_erl: $(OBJDIR)/safe_string.o $(OBJDIR)/to_erl.o + $(V_LD) $(LDFLAGS) -o $@ $(OBJDIR)/safe_string.o $(OBJDIR)/to_erl.o +$(OBJDIR)/to_erl.o: $(ETC)/to_erl.c $(RC_GENERATED) + $(V_CC) $(CFLAGS) -o $@ -c $(ETC)/to_erl.c # dyn_erl $(BINDIR)/dyn_erl: $(OBJDIR)/safe_string.o $(OBJDIR)/dyn_erl.o $(V_LD) $(LDFLAGS) -o $@ $(OBJDIR)/safe_string.o $(OBJDIR)/dyn_erl.o $(OBJDIR)/dyn_erl.o: $(UXETC)/dyn_erl.c $(RC_GENERATED) $(V_CC) $(CFLAGS) -o $@ -c $(UXETC)/dyn_erl.c -$(OBJDIR)/safe_string.o: ../common/safe_string.c $(RC_GENERATED) - $(V_CC) $(CFLAGS) -o $@ -c ../common/safe_string.c +$(OBJDIR)/safe_string.o: $(ETC)/safe_string.c $(RC_GENERATED) + $(V_CC) $(CFLAGS) -o $@ -c $(ETC)/safe_string.c ifneq ($(TARGET),win32) $(BINDIR)/$(ERLEXEC): $(OBJDIR)/$(ERLEXEC).o $(ERTS_LIB) @@ -499,30 +466,6 @@ erl.src: $(UXETC)/erl.src.src ../../vsn.mk $(TARGET)/Makefile -e 's;%VSN%;$(VSN);' \ $(UXETC)/erl.src.src > erl.src -#--------------------------------------------------------- -# OSE specific targets -#--------------------------------------------------------- -ifeq ($(findstring ose,$(TARGET)),ose) -$(OBJDIR)/ose_confd.o: $(OSE_CONFD) - $(V_CC) $(CFLAGS) -o $@ -c $< -$(OBJDIR)/crt0_lm.o: $(CRT0_LM) - $(V_CC) $(CFLAGS) -o $@ -c $< -OSE_LM_OBJS += $(OBJDIR)/ose_confd.o $(OBJDIR)/crt0_lm.o - -$(BINDIR)/run_erl_lm: $(OBJDIR)/run_erl_main.o $(OBJDIR)/safe_string.o $(OBJDIR)/run_erl.o $(OBJDIR)/run_erl_common.o $(OBJDIR)/to_erl_common.o $(OSE_LM_OBJS) - $(call build-ose-load-module, $@, $^, $(LIBS), $(RUN_ERL_LMCONF)) - - -$(OBJDIR)/run_erl_main.o: $(OSEETC)/run_erl_main.c $(OSEETC)/run_erl.h ../common/to_erl_common.h $(RC_GENERATED) - $(V_CC) $(CFLAGS) -I ../common/ -o $@ -c $(OSEETC)/run_erl_main.c - -endif - -#--------------------------------------------------------- -# End of ose specific targets. -#--------------------------------------------------------- - - # ---------------------------------------------------- # Release Target # ---------------------------------------------------- @@ -537,11 +480,9 @@ endif $(INSTALL_DIR) "$(RELEASE_PATH)/erts-$(VSN)/bin" ifneq ($(TARGET), win32) ifneq ($(findstring vxworks,$(TARGET)), vxworks) -ifneq ($(findstring ose,$(TARGET)), ose) $(INSTALL_SCRIPT) erl.src "$(RELEASE_PATH)/erts-$(VSN)/bin" endif endif -endif ifneq ($(INSTALL_PROGS),) $(INSTALL_PROGRAM) $(INSTALL_PROGS) "$(RELEASE_PATH)/erts-$(VSN)/bin" endif diff --git a/erts/etc/common/run_erl_common.c b/erts/etc/common/run_erl_common.c deleted file mode 100644 index c03d5e3ae2..0000000000 --- a/erts/etc/common/run_erl_common.c +++ /dev/null @@ -1,696 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2014. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include <dirent.h> -#include <errno.h> -#include <fcntl.h> -#include <stdarg.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <sys/stat.h> -#include <sys/types.h> -#include <time.h> -#include <unistd.h> - -#ifdef __ANDROID__ -# include <termios.h> -#endif - -#ifdef HAVE_SYSLOG_H -# include <syslog.h> -#endif - -#ifdef HAVE_SYS_IOCTL_H -# include <sys/ioctl.h> -#endif - -#ifdef __OSE__ -# include "ramlog.h" -#endif - -#include "run_erl_common.h" -#include "safe_string.h" - -#define DEFAULT_LOG_GENERATIONS 5 -#define LOG_MAX_GENERATIONS 1000 /* No more than 1000 log files */ -#define LOG_MIN_GENERATIONS 2 /* At least two to switch between */ -#define DEFAULT_LOG_MAXSIZE 100000 -#define LOG_MIN_MAXSIZE 1000 /* Smallast value for changing log file */ -#define LOG_STUBNAME "erlang.log." -#define LOG_PERM 0664 -#define DEFAULT_LOG_ACTIVITY_MINUTES 5 -#define DEFAULT_LOG_ALIVE_MINUTES 15 -#define DEFAULT_LOG_ALIVE_FORMAT "%a %b %e %T %Z %Y" -#define ALIVE_BUFFSIZ 1024 - -#define STATUSFILENAME "/run_erl.log" - -#define PIPE_STUBNAME "erlang.pipe" -#define PIPE_STUBLEN strlen(PIPE_STUBNAME) -#define PERM (S_IWUSR | S_IRUSR | S_IWOTH | S_IROTH | S_IWGRP | S_IRGRP) - -/* OSE has defined O_SYNC but it is not recognized by open */ -#if !defined(O_SYNC) || defined(__OSE__) -#undef O_SYNC -#define O_SYNC 0 -#define USE_FSYNC 1 -#endif - -/* Global variable definitions - * We need this complex way of handling global variables because of how - * OSE works here. We want to make it possible to run the shell command - * run_erl multiple times with different global variables without them - * effecting eachother. - */ - -#define STATUSFILE (RE_DATA->statusfile) -#define LOG_DIR (RE_DATA->log_dir) -#define STDSTATUS (RE_DATA->stdstatus) -#define LOG_GENERATIONS (RE_DATA->log_generations) -#define LOG_MAXSIZE (RE_DATA->log_maxsize) -#define LOG_ACTIVITY_MINUTES (RE_DATA->log_activity_minutes) -#define LOG_ALIVE_IN_GMT (RE_DATA->log_alive_in_gmt) -#define LOG_ALIVE_FORMAT (RE_DATA->log_alive_format) -#define RUN_DAEMON (RE_DATA->run_daemon) -#define LOG_ALIVE_MINUTES (RE_DATA->log_alive_minutes) -#define LOG_NUM (RE_DATA->log_num) -#define LFD (RE_DATA->lfd) -#define PROTOCOL_VER (RE_DATA->protocol_ver) - -struct run_erl_ { - /* constant config data */ - char statusfile[FILENAME_BUFSIZ]; - char log_dir[FILENAME_BUFSIZ]; - FILE *stdstatus; - int log_generations; - int log_maxsize; - int log_activity_minutes; - int log_alive_in_gmt; - char log_alive_format[ALIVE_BUFFSIZ+1]; - int run_daemon; - int log_alive_minutes; - /* Current log number and log fd */ - int log_num; - int lfd; - unsigned protocol_ver; -}; - -typedef struct run_erl_ run_erl; - -#ifdef __OSE__ -static OSPPDKEY run_erl_pp_key; -#define RE_DATA (*(run_erl**)ose_get_ppdata(run_erl_pp_key)) -#else -static run_erl re; -#define RE_DATA (&re) -#endif - -/* prototypes */ - -static int next_log(int log_num); -static int prev_log(int log_num); -static int find_next_log_num(void); -static int open_log(int log_num, int flags); - -/* - * getenv_int: - */ -static char *getenv_int(const char *name) { -#ifdef __OSE__ - return get_env(get_bid(current_process()),name); -#else - return getenv(name); -#endif -} - -/* - * next_log: - * Returns the index number that follows the given index number. - * (Wrapping after log_generations) - */ -static int next_log(int log_num) { - return log_num>=LOG_GENERATIONS?1:log_num+1; -} - -/* - * prev_log: - * Returns the index number that precedes the given index number. - * (Wrapping after log_generations) - */ -static int prev_log(int log_num) { - return log_num<=1?LOG_GENERATIONS:log_num-1; -} - -/* - * find_next_log_num() - * Searches through the log directory to check which logs that already - * exist. It finds the "hole" in the sequence, and returns the index - * number for the last log in the log sequence. If there is no hole, index - * 1 is returned. - */ -static int find_next_log_num(void) { - int i, next_gen, log_gen; - DIR *dirp; - struct dirent *direntp; - int log_exists[LOG_MAX_GENERATIONS+1]; - int stub_len = strlen(LOG_STUBNAME); - - /* Initialize exiting log table */ - - for(i=LOG_GENERATIONS; i>=0; i--) - log_exists[i] = 0; - dirp = opendir(LOG_DIR); - if(!dirp) { - ERRNO_ERR1(LOG_ERR,"Can't access log directory '%s'", LOG_DIR); - exit(1); - } - - /* Check the directory for existing logs */ - - while((direntp=readdir(dirp)) != NULL) { - if(strncmp(direntp->d_name,LOG_STUBNAME,stub_len)==0) { - int num = atoi(direntp->d_name+stub_len); - if(num < 1 || num > LOG_GENERATIONS) - continue; - log_exists[num] = 1; - } - } - closedir(dirp); - - /* Find out the next available log file number */ - - next_gen = 0; - for(i=LOG_GENERATIONS; i>=0; i--) { - if(log_exists[i]) - if(next_gen) - break; - else - ; - else - next_gen = i; - } - - /* Find out the current log file number */ - - if(next_gen) - log_gen = prev_log(next_gen); - else - log_gen = 1; - - return log_gen; -} /* find_next_log_num() */ - -static int open_log(int log_num, int flags) -{ - char buf[FILENAME_MAX]; - time_t now; - struct tm *tmptr; - char log_buffer[ALIVE_BUFFSIZ+1]; - - /* Remove the next log (to keep a "hole" in the log sequence) */ - sn_printf(buf, sizeof(buf), "%s/%s%d", - LOG_DIR, LOG_STUBNAME, next_log(log_num)); - unlink(buf); - - /* Create or continue on the current log file */ - sn_printf(buf, sizeof(buf), "%s/%s%d", LOG_DIR, LOG_STUBNAME, log_num); - - LFD = sf_open(buf, flags, LOG_PERM); - - if(LFD <0){ - ERRNO_ERR1(LOG_ERR,"Can't open log file '%s'.", buf); - exit(1); - } - - /* Write a LOGGING STARTED and time stamp into the log file */ - time(&now); - if (LOG_ALIVE_IN_GMT) { - tmptr = gmtime(&now); - } else { - tmptr = localtime(&now); - } - if (!strftime(log_buffer, ALIVE_BUFFSIZ, LOG_ALIVE_FORMAT, - tmptr)) { - strn_cpy(log_buffer, sizeof(log_buffer), - "(could not format time in 256 positions " - "with current format string.)"); - } - log_buffer[ALIVE_BUFFSIZ] = '\0'; - - sn_printf(buf, sizeof(buf), "\n=====\n===== LOGGING STARTED %s\n=====\n", - log_buffer); - if (erts_run_erl_write_all(LFD, buf, strlen(buf)) < 0) - erts_run_erl_log_status("Error in writing to log.\n"); - -#if USE_FSYNC - fsync(LFD); -#endif - - return LFD; -} - -/* Instead of making sure basename exists, we do our own */ -char *simple_basename(char *path) -{ - char *ptr; - for (ptr = path; *ptr != '\0'; ++ptr) { - if (*ptr == '/') { - path = ptr + 1; - } - } - return path; -} - -ssize_t sf_read(int fd, void *buffer, size_t len) { - ssize_t n = 0; - - do { n = read(fd, buffer, len); } while (n < 0 && errno == EINTR); - - return n; -} - -ssize_t sf_write(int fd, const void *buffer, size_t len) { - ssize_t n = 0; - - do { n = write(fd, buffer, len); } while (n < 0 && errno == EINTR); - - return n; -} - -int sf_open(const char *path, int type, mode_t mode) { - int fd = 0; - - do { fd = open(path, type, mode); } while(fd < 0 && errno == EINTR); - - return fd; -} - -int sf_close(int fd) { - int res = 0; - - do { res = close(fd); } while(res < 0 && errno == EINTR); - - return res; -} - -/* Call write() until entire buffer has been written or error. - * Return len or -1. - */ -int erts_run_erl_write_all(int fd, const char* buf, int len) -{ - int left = len; - int written; - for (;;) { - do { - written = write(fd,buf,left); - } while (written < 0 && errno == EINTR); - if (written == left) { - return len; - } - if (written < 0) { - return -1; - } - left -= written; - buf += written; - } - return written; -} - -/* erts_run_erl_log_status() - * Prints the arguments to a status file - * Works like printf (see vfrpintf) - */ -void erts_run_erl_log_status(const char *format,...) -{ - va_list args; - time_t now; - - if (STDSTATUS == NULL) - STDSTATUS = fopen(STATUSFILE, "w"); - if (STDSTATUS == NULL) - return; - now = time(NULL); - fprintf(STDSTATUS, "run_erl [%d] %s", -#ifdef __OSE__ - (int)current_process(), -#else - (int)getpid(), -#endif - ctime(&now)); - va_start(args, format); - vfprintf(STDSTATUS, format, args); - va_end(args); - fflush(STDSTATUS); - return; -} - -/* Fetch the current log alive minutes */ -int erts_run_erl_log_alive_minutes() { - return LOG_ALIVE_MINUTES; -} - -/* error_logf() - * Prints the arguments to stderr or syslog - * Works like printf (see vfprintf) - */ -void erts_run_erl_log_error(int priority, int line, const char *format, ...) -{ - va_list args; - va_start(args, format); - -#ifdef HAVE_SYSLOG_H - if (RUN_DAEMON) { - vsyslog(priority,format,args); - } - else -#endif -#ifdef __OSE__ - if (RUN_DAEMON) { - char *buff = malloc(sizeof(char)*1024); - vsnprintf(buff,1024,format, args); - ramlog_printf(buff); - } - else -#endif - { - time_t now = time(NULL); - fprintf(stderr, "run_erl:%d [%d] %s", line, -#ifdef __OSE__ - (int)current_process(), -#else - (int)getpid(), -#endif - ctime(&now)); - vfprintf(stderr, format, args); - } - va_end(args); -} - -/* erts_run_erl_log_write() - * Writes a message to lfd. If the current log file is full, - * a new log file is opened. - */ -int erts_run_erl_log_write(char* buf, size_t len) -{ - int size; - ssize_t res; - /* Decide if new logfile needed, and open if so */ - - size = lseek(LFD,0,SEEK_END); - if(size+len > LOG_MAXSIZE) { - int res; - do { - res = close(LFD); - } while (res < 0 && errno == EINTR); - LOG_NUM = next_log(LOG_NUM); - LFD = open_log(LOG_NUM, O_RDWR|O_CREAT|O_TRUNC|O_SYNC); - } - - /* Write to log file */ - - if ((res = erts_run_erl_write_all(LFD, buf, len)) < 0) { - erts_run_erl_log_status("Error in writing to log.\n"); - } - -#if USE_FSYNC - fsync(LFD); -#endif - return res; -} - -int erts_run_erl_log_activity(int timeout,time_t now,time_t last_activity) { - char log_alive_buffer[ALIVE_BUFFSIZ+1]; - char buf[BUFSIZ]; - - if (timeout || now - last_activity > LOG_ACTIVITY_MINUTES*60) { - /* Either a time out: 15 minutes without action, */ - /* or something is coming in right now, but it's a long time */ - /* since last time, so let's write a time stamp this message */ - struct tm *tmptr; - if (LOG_ALIVE_IN_GMT) { - tmptr = gmtime(&now); - } else { - tmptr = localtime(&now); - } - if (!strftime(log_alive_buffer, ALIVE_BUFFSIZ, LOG_ALIVE_FORMAT, - tmptr)) { - strn_cpy(log_alive_buffer, sizeof(log_alive_buffer), - "(could not format time in 256 positions " - "with current format string.)"); - } - log_alive_buffer[ALIVE_BUFFSIZ] = '\0'; - - sn_printf(buf, sizeof(buf), "\n===== %s%s\n", - timeout?"ALIVE ":"", log_alive_buffer); - return erts_run_erl_log_write(buf, strlen(buf)); - } - return 0; -} - -int erts_run_erl_log_open() { - - LOG_NUM = find_next_log_num(); - LFD = open_log(LOG_NUM, O_RDWR|O_APPEND|O_CREAT|O_SYNC); - return 0; -} - -int erts_run_erl_log_init(int daemon, char* logdir) { - char *p; - -#ifdef __OSE__ - run_erl **re_pp; - if (!run_erl_pp_key) - ose_create_ppdata("run_erl_ppdata",&run_erl_pp_key); - re_pp = (run_erl **)ose_get_ppdata(run_erl_pp_key); - *re_pp = malloc(sizeof(run_erl)); -#endif - - STDSTATUS = NULL; - LOG_GENERATIONS = DEFAULT_LOG_GENERATIONS; - LOG_MAXSIZE = DEFAULT_LOG_MAXSIZE; - LOG_ACTIVITY_MINUTES = DEFAULT_LOG_ACTIVITY_MINUTES; - LOG_ALIVE_IN_GMT = 0; - RUN_DAEMON = 0; - LOG_ALIVE_MINUTES = DEFAULT_LOG_ALIVE_MINUTES; - LFD = 0; - PROTOCOL_VER = RUN_ERL_LO_VER; /* assume lowest to begin with */ - - /* Get values for LOG file handling from the environment */ - if ((p = getenv_int("RUN_ERL_LOG_ALIVE_MINUTES"))) { - LOG_ALIVE_MINUTES = atoi(p); - if (!LOG_ALIVE_MINUTES) { - ERROR1(LOG_ERR,"Minimum value for RUN_ERL_LOG_ALIVE_MINUTES is 1 " - "(current value is %s)",p); - } - LOG_ACTIVITY_MINUTES = LOG_ALIVE_MINUTES / 3; - if (!LOG_ACTIVITY_MINUTES) { - ++LOG_ACTIVITY_MINUTES; - } - } - if ((p = getenv_int( - "RUN_ERL_LOG_ACTIVITY_MINUTES"))) { - LOG_ACTIVITY_MINUTES = atoi(p); - if (!LOG_ACTIVITY_MINUTES) { - ERROR1(LOG_ERR,"Minimum value for RUN_ERL_LOG_ACTIVITY_MINUTES is 1 " - "(current value is %s)",p); - } - } - if ((p = getenv_int("RUN_ERL_LOG_ALIVE_FORMAT"))) { - if (strlen(p) > ALIVE_BUFFSIZ) { - ERROR1(LOG_ERR, "RUN_ERL_LOG_ALIVE_FORMAT can contain a maximum of " - "%d characters", ALIVE_BUFFSIZ); - } - strn_cpy(LOG_ALIVE_FORMAT, sizeof(LOG_ALIVE_FORMAT), p); - } else { - strn_cpy(LOG_ALIVE_FORMAT, sizeof(LOG_ALIVE_FORMAT), - DEFAULT_LOG_ALIVE_FORMAT); - } - if ((p = getenv_int("RUN_ERL_LOG_ALIVE_IN_UTC")) - && strcmp(p,"0")) { - ++LOG_ALIVE_IN_GMT; - } - if ((p = getenv_int("RUN_ERL_LOG_GENERATIONS"))) { - LOG_GENERATIONS = atoi(p); - if (LOG_GENERATIONS < LOG_MIN_GENERATIONS) - ERROR1(LOG_ERR,"Minimum RUN_ERL_LOG_GENERATIONS is %d", - LOG_MIN_GENERATIONS); - if (LOG_GENERATIONS > LOG_MAX_GENERATIONS) - ERROR1(LOG_ERR,"Maximum RUN_ERL_LOG_GENERATIONS is %d", - LOG_MAX_GENERATIONS); - } - - if ((p = getenv_int("RUN_ERL_LOG_MAXSIZE"))) { - LOG_MAXSIZE = atoi(p); - if (LOG_MAXSIZE < LOG_MIN_MAXSIZE) - ERROR1(LOG_ERR,"Minimum RUN_ERL_LOG_MAXSIZE is %d", LOG_MIN_MAXSIZE); - } - - RUN_DAEMON = daemon; - - strn_cpy(LOG_DIR, sizeof(LOG_DIR), logdir); - strn_cpy(STATUSFILE, sizeof(STATUSFILE), LOG_DIR); - strn_cat(STATUSFILE, sizeof(STATUSFILE), STATUSFILENAME); - - return 0; -} - -/* create_fifo() - * Creates a new fifo with the given name and permission. - */ -static int create_fifo(char *name, int perm) -{ - if ((mkfifo(name, perm) < 0) && (errno != EEXIST)) - return -1; - return 0; -} - -/* - * w- and r_pipename have to be pre-allocated of atleast FILENAME_MAX size - */ -int erts_run_erl_open_fifo(char *pipename,char *w_pipename,char *r_pipename) { - int calculated_pipename = 0; - int highest_pipe_num = 0; - int fd; - - /* - * Create FIFOs and open them - */ - - if(*pipename && pipename[strlen(pipename)-1] == '/') { - /* The user wishes us to find a unique pipe name in the specified */ - /* directory */ - DIR *dirp; - struct dirent *direntp; - - calculated_pipename = 1; - dirp = opendir(pipename); - if(!dirp) { - ERRNO_ERR1(LOG_ERR,"Can't access pipe directory '%s'.", pipename); - return 1; - } - - /* Check the directory for existing pipes */ - - while((direntp=readdir(dirp)) != NULL) { - if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) { - int num = atoi(direntp->d_name+PIPE_STUBLEN+1); - if(num > highest_pipe_num) - highest_pipe_num = num; - } - } - closedir(dirp); - strn_catf(pipename, BUFSIZ, "%s.%d", - PIPE_STUBNAME, highest_pipe_num+1); - } /* if */ - - for(;;) { - /* write FIFO - is read FIFO for `to_erl' program */ - strn_cpy(w_pipename, BUFSIZ, pipename); - strn_cat(w_pipename, BUFSIZ, ".r"); - if (create_fifo(w_pipename, PERM) < 0) { - ERRNO_ERR1(LOG_ERR,"Cannot create FIFO %s for writing.", - w_pipename); - return 1; - } - - /* read FIFO - is write FIFO for `to_erl' program */ - strn_cpy(r_pipename, BUFSIZ, pipename); - strn_cat(r_pipename, BUFSIZ, ".w"); - - /* Check that nobody is running run_erl already */ - if ((fd = sf_open(r_pipename, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) { - /* Open as client succeeded -- run_erl is already running! */ - sf_close(fd); - if (calculated_pipename) { - ++highest_pipe_num; - strn_catf(pipename, BUFSIZ, "%s.%d", - PIPE_STUBNAME, highest_pipe_num+1); - continue; - } - ERROR1(LOG_ERR, "Erlang already running on pipe %s.\n", pipename); - unlink(w_pipename); - return 1; - } - if (create_fifo(r_pipename, PERM) < 0) { - unlink(w_pipename); - ERRNO_ERR1(LOG_ERR,"Cannot create FIFO %s for reading.", - r_pipename); - return 1; - } - break; - } - return 0; -} - -/* Extract any control sequences that are ment only for run_erl - * and should not be forwarded to the pty. - */ -int erts_run_erl_extract_ctrl_seq(char* buf, int len, int mfd) -{ - static const char prefix[] = "\033_"; - static const char suffix[] = "\033\\"; - char* bufend = buf + len; - char* start = buf; - char* command; - char* end; - - for (;;) { - start = find_str(start, bufend-start, prefix); - if (!start) break; - - command = start + strlen(prefix); - end = find_str(command, bufend-command, suffix); - if (end) { - unsigned col, row; - if (sscanf(command,"version=%u", &PROTOCOL_VER)==1) { - /*fprintf(stderr,"to_erl v%u\n", protocol_ver);*/ - } - else if (sscanf(command,"winsize=%u,%u", &col, &row)==2) { -#ifdef TIOCSWINSZ - struct winsize ws; - ws.ws_col = col; - ws.ws_row = row; - if (ioctl(mfd, TIOCSWINSZ, &ws) < 0) { - ERRNO_ERR0(LOG_ERR,"Failed to set window size"); - } -#endif - } - else { - ERROR2(LOG_ERR, "Ignoring unknown ctrl command '%.*s'\n", - (int)(end-command), command); - } - - /* Remove ctrl sequence from buf */ - end += strlen(suffix); - memmove(start, end, bufend-end); - bufend -= end - start; - } - else { - ERROR2(LOG_ERR, "Missing suffix in ctrl sequence '%.*s'\n", - (int)(bufend-start), start); - break; - } - } - return bufend - buf; -} diff --git a/erts/etc/common/run_erl_common.h b/erts/etc/common/run_erl_common.h deleted file mode 100644 index cecf7521f9..0000000000 --- a/erts/etc/common/run_erl_common.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -/* - * Functions that are common to both OSE and unix implementations of run_erl - */ -#ifndef ERL_RUN_ERL_LOG_H -#define ERL_RUN_ERL_LOG_H - -#include <stdio.h> -#include <time.h> -#include <unistd.h> - -#include "run_erl_vsn.h" - -/* Log handling */ -int erts_run_erl_log_init(int run_daemon, char* logdir); -int erts_run_erl_log_open(void); -int erts_run_erl_log_close(void); -int erts_run_erl_log_write(char *buff, size_t len); -int erts_run_erl_log_activity(int timeout, time_t now, time_t last_activity); - -void erts_run_erl_log_status(const char *format,...); -void erts_run_erl_log_error(int priority, int line, const char *format,...); - -int erts_run_erl_open_fifo(char *pipename,char *w_pipename,char *r_pipename); -int erts_run_erl_log_alive_minutes(void); -int erts_run_erl_extract_ctrl_seq(char* buf, int len, int mfd); - -/* File operations */ -ssize_t sf_read(int fd, void *buffer, size_t len); -ssize_t sf_write(int fd, const void *buffer, size_t len); -int sf_open(const char *path, int type, mode_t mode); -int sf_close(int fd); -int erts_run_erl_write_all(int fd, const char* buf, int len); -char *simple_basename(char *path); - -#ifndef LOG_ERR -#ifdef __OSE__ -#define LOG_ERR 0 -#else -#define LOG_ERR NULL -#endif -#endif - -#define ERROR0(Prio,Format) erts_run_erl_log_error(Prio,__LINE__,Format"\n") -#define ERROR1(Prio,Format,A1) erts_run_erl_log_error(Prio,__LINE__,Format"\n",A1) -#define ERROR2(Prio,Format,A1,A2) erts_run_erl_log_error(Prio,__LINE__,Format"\n",A1,A2) - -#ifdef HAVE_STRERROR -# define ADD_ERRNO(Format) "errno=%d '%s'\n"Format"\n",errno,strerror(errno) -#else -# define ADD_ERRNO(Format) "errno=%d\n"Format"\n",errno -#endif -#define ERRNO_ERR0(Prio,Format) erts_run_erl_log_error(Prio,__LINE__,ADD_ERRNO(Format)) -#define ERRNO_ERR1(Prio,Format,A1) erts_run_erl_log_error(Prio,__LINE__,ADD_ERRNO(Format),A1) -#define ERRNO_ERR2(Prio,Format,A1,A2) erts_run_erl_log_error(Prio,__LINE__,ADD_ERRNO(Format),A1,A2) - -#define RUN_ERL_USAGE \ - "%s (pipe_name|pipe_dir/) log_dir \"command [parameters ...]\"" \ - "\n\nDESCRIPTION:\n" \ - "You may also set the environment variables RUN_ERL_LOG_GENERATIONS\n" \ - "and RUN_ERL_LOG_MAXSIZE to the number of log files to use and the\n" \ - "size of the log file when to switch to the next log file\n" - -#ifndef FILENAME_MAX -#define FILENAME_MAX 250 -#endif - -#define FILENAME_BUFSIZ FILENAME_MAX - -#ifdef O_NONBLOCK -# define DONT_BLOCK_PLEASE O_NONBLOCK -#else -# define DONT_BLOCK_PLEASE O_NDELAY -# ifndef EAGAIN -# define EAGAIN -3898734 -# endif -#endif - -#endif diff --git a/erts/etc/common/to_erl_common.c b/erts/etc/common/to_erl_common.c deleted file mode 100644 index 8aa94ccfa4..0000000000 --- a/erts/etc/common/to_erl_common.c +++ /dev/null @@ -1,717 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 1996-2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -/* - * Module: to_erl.c - * - * This module implements a process that opens two specified FIFOs, one - * for reading and one for writing; reads from its stdin, and writes what - * it has read to the write FIF0; reads from the read FIFO, and writes to - * its stdout. - * - ________ _________ - | |--<-- pipe.r (fifo1) --<--| | - | to_erl | | run_erl | (parent) - |________|-->-- pipe.w (fifo2) -->--|_________| - ^ master pty - | - | slave pty - ____V____ - | | - | "erl" | (child) - |_________| - */ -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/time.h> -#include <sys/types.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <dirent.h> -#include <errno.h> - -#ifdef __OSE__ -#include <aio.h> -#include "ose.h" -#include "efs.h" -#include "ose_spi/fm.sig" -#else /* __UNIX__ */ -#include <termios.h> -#include <signal.h> -#endif - -#ifdef HAVE_SYS_IOCTL_H -# include <sys/ioctl.h> -#endif - -#include "to_erl_common.h" -#include "run_erl_vsn.h" -#include "safe_string.h" /* strn_cpy, strn_catf, sn_printf, etc. */ - -#if defined(O_NONBLOCK) -# define DONT_BLOCK_PLEASE O_NONBLOCK -#else -# define DONT_BLOCK_PLEASE O_NDELAY -# if !defined(EAGAIN) -# define EAGAIN -3898734 -# endif -#endif - -#ifdef HAVE_STRERROR -# define STRERROR(x) strerror(x) -#else -# define STRERROR(x) "" -#endif - -#define noDEBUG - -#ifdef __OSE__ -#define PIPE_DIR "/pipe/" -#else -#define PIPE_DIR "/tmp/" -#endif -#define PIPE_STUBNAME "erlang.pipe" -#define PIPE_STUBLEN strlen(PIPE_STUBNAME) - -#ifdef DEBUG -#define STATUS(s) { fprintf(stderr, (s)); fflush(stderr); } -#else -#define STATUS(s) -#endif - -#ifndef FILENAME_MAX -#define FILENAME_MAX 250 -#endif - -static int tty_eof = 0; -static int protocol_ver = RUN_ERL_LO_VER; /* assume lowest to begin with */ - -static int write_all(int fd, const char* buf, int len); -static int version_handshake(char* buf, int len, int wfd); - - -#ifdef __OSE__ - -#define SET_AIO(REQ,FD,SIZE,BUFF) \ - /* Make sure to clean data structure of previous request */ \ - memset(&(REQ),0,sizeof(REQ)); \ - (REQ).aio_fildes = FD; \ - (REQ).aio_offset = FM_POSITION_CURRENT; \ - (REQ).aio_nbytes = SIZE; \ - (REQ).aio_buf = BUFF; \ - (REQ).aio_sigevent.sigev_notify = SIGEV_NONE - -#define READ_AIO(REQ,FD,SIZE,BUFF) \ - SET_AIO(REQ,FD,SIZE,BUFF); \ - if (aio_read(&(REQ)) != 0) \ - fprintf(stderr,"aio_read of child_read_req(%d) failed" \ - "with error %d\n",FD,errno) - -union SIGNAL { - SIGSELECT signo; - struct FmReadPtr fm_read_ptr; -}; - -#else /* __UNIX__ */ -static int recv_sig = 0; -static struct termios tty_smode, tty_rmode; -static int window_size_seq(char* buf, size_t bufsz); -#ifdef DEBUG -static void show_terminal_settings(struct termios *); -#endif - -static void handle_ctrlc(int sig) -{ - /* Reinstall the handler, and signal break flag */ - signal(SIGINT,handle_ctrlc); - recv_sig = SIGINT; -} - -static void handle_sigwinch(int sig) -{ - recv_sig = SIGWINCH; -} -#endif - -static void usage(char *pname) -{ - fprintf(stderr, "Usage: "); - fprintf(stderr,TO_ERL_USAGE,pname); -} - -int to_erl(int argc, char **argv) -{ - char FIFO1[FILENAME_MAX], FIFO2[FILENAME_MAX]; - int i, len, wfd, rfd; - char pipename[FILENAME_MAX]; - int pipeIx = 1; - int force_lock = 0; - int got_some = 0; - -#ifdef __OSE__ - struct aiocb stdin_read_req, pipe_read_req; - FmHandle stdin_fh, pipe_fh; - char *stdin_buf, *pipe_buf; - char *buf; - union SIGNAL *sig; -#else /* __UNIX__ */ - char buf[BUFSIZ]; - fd_set readfds; -#endif - - if (argc >= 2 && argv[1][0]=='-') { - switch (argv[1][1]) { - case 'h': - usage(argv[0]); - exit(1); - case 'F': - force_lock = 1; - break; - default: - fprintf(stderr,"Invalid option '%s'\n",argv[1]); - exit(1); - } - pipeIx = 2; - } - -#ifdef DEBUG - fprintf(stderr, "%s: pid is : %d\n", argv[0],(int) -#ifdef __OSE__ - current_process() -#else /* __UNIX__ */ - getpid() -#endif - ); -#endif - - strn_cpy(pipename, sizeof(pipename), - (argv[pipeIx] ? argv[pipeIx] : PIPE_DIR)); - - if(*pipename && pipename[strlen(pipename)-1] == '/') { - /* The user wishes us to find a pipe name in the specified */ - /* directory */ - int highest_pipe_num = 0; - DIR *dirp; - struct dirent *direntp; - - dirp = opendir(pipename); - if(!dirp) { - fprintf(stderr, "Can't access pipe directory %s: %s\n", pipename, strerror(errno)); - exit(1); - } - - /* Check the directory for existing pipes */ - - while((direntp=readdir(dirp)) != NULL) { - if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) { - int num = atoi(direntp->d_name+PIPE_STUBLEN+1); - if(num > highest_pipe_num) - highest_pipe_num = num; - } - } - closedir(dirp); - strn_catf(pipename, sizeof(pipename), (highest_pipe_num?"%s.%d":"%s"), - PIPE_STUBNAME, highest_pipe_num); - } /* if */ - - /* read FIFO */ - sn_printf(FIFO1,sizeof(FIFO1),"%s.r",pipename); - /* write FIFO */ - sn_printf(FIFO2,sizeof(FIFO2),"%s.w",pipename); - -#ifndef __OSE__ - /* Check that nobody is running to_erl on this pipe already */ - if ((wfd = open (FIFO1, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) { - /* Open as server succeeded -- to_erl is already running! */ - close(wfd); - fprintf(stderr, "Another to_erl process already attached to pipe " - "%s.\n", pipename); - if (force_lock) { - fprintf(stderr, "But we proceed anyway by force (-F).\n"); - } - else { - exit(1); - } - } -#endif - - if ((rfd = open (FIFO1, O_RDONLY|DONT_BLOCK_PLEASE, 0)) < 0) { -#ifdef DEBUG - fprintf(stderr, "Could not open FIFO %s for reading.\n", FIFO1); -#endif - fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno)); - exit(1); - } -#ifdef DEBUG - fprintf(stderr, "to_erl: %s opened for reading\n", FIFO1); -#endif - - if ((wfd = open (FIFO2, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) { -#ifdef DEBUG - fprintf(stderr, "Could not open FIFO %s for writing.\n", FIFO2); -#endif - fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno)); - close(rfd); - exit(1); - } -#ifdef DEBUG - fprintf(stderr, "to_erl: %s opened for writing\n", FIFO2); -#endif - -#ifndef __OSE__ - fprintf(stderr, "Attaching to %s (^D to exit)\n\n", pipename); -#else - fprintf(stderr, "Attaching to %s (^C to exit)\n\n", pipename); -#endif - -#ifndef __OSE__ - /* Set break handler to our handler */ - signal(SIGINT,handle_ctrlc); - - /* - * Save the current state of the terminal, and set raw mode. - */ - if (tcgetattr(0, &tty_rmode) , 0) { - fprintf(stderr, "Cannot get terminals current mode\n"); - exit(-1); - } - tty_smode = tty_rmode; - tty_eof = '\004'; /* Ctrl+D to exit */ -#ifdef DEBUG - show_terminal_settings(&tty_rmode); -#endif - tty_smode.c_iflag = - 1*BRKINT |/*Signal interrupt on break.*/ - 1*IGNPAR |/*Ignore characters with parity errors.*/ - 1*ISTRIP |/*Strip character.*/ - 0; - -#if 0 -0*IGNBRK |/*Ignore break condition.*/ -0*PARMRK |/*Mark parity errors.*/ -0*INPCK |/*Enable input parity check.*/ -0*INLCR |/*Map NL to CR on input.*/ -0*IGNCR |/*Ignore CR.*/ -0*ICRNL |/*Map CR to NL on input.*/ -0*IUCLC |/*Map upper-case to lower-case on input.*/ -0*IXON |/*Enable start/stop output control.*/ -0*IXANY |/*Enable any character to restart output.*/ -0*IXOFF |/*Enable start/stop input control.*/ -0*IMAXBEL|/*Echo BEL on input line too long.*/ -#endif - - tty_smode.c_oflag = - 1*OPOST |/*Post-process output.*/ - 1*ONLCR |/*Map NL to CR-NL on output.*/ -#ifdef XTABS - 1*XTABS |/*Expand tabs to spaces. (Linux)*/ -#endif -#ifdef OXTABS - 1*OXTABS |/*Expand tabs to spaces. (FreeBSD)*/ -#endif -#ifdef NL0 - 1*NL0 |/*Select newline delays*/ -#endif -#ifdef CR0 - 1*CR0 |/*Select carriage-return delays*/ -#endif -#ifdef TAB0 - 1*TAB0 |/*Select horizontal tab delays*/ -#endif -#ifdef BS0 - 1*BS0 |/*Select backspace delays*/ -#endif -#ifdef VT0 - 1*VT0 |/*Select vertical tab delays*/ -#endif -#ifdef FF0 - 1*FF0 |/*Select form feed delays*/ -#endif - 0; - -#if 0 -0*OLCUC |/*Map lower case to upper on output.*/ -0*OCRNL |/*Map CR to NL on output.*/ -0*ONOCR |/*No CR output at column 0.*/ -0*ONLRET |/*NL performs CR function.*/ -0*OFILL |/*Use fill characters for delay.*/ -0*OFDEL |/*Fill is DEL, else NULL.*/ -0*NL1 | -0*CR1 | -0*CR2 | -0*CR3 | -0*TAB1 | -0*TAB2 | -0*TAB3 |/*Expand tabs to spaces.*/ -0*BS1 | -0*VT1 | -0*FF1 | -#endif - - /* JALI: removed setting the tty_smode.c_cflag flags, since this is not */ - /* advisable if this is a *real* terminal, such as the console. In fact */ - /* this may hang the entire machine, deep, deep down (signalling break */ - /* or toggling the abort switch doesn't help) */ - - tty_smode.c_lflag = - 0; - -#if 0 -0*ISIG |/*Enable signals.*/ -0*ICANON |/*Canonical input (erase and kill processing).*/ -0*XCASE |/*Canonical upper/lower presentation.*/ -0*ECHO |/*Enable echo.*/ -0*ECHOE |/*Echo erase character as BS-SP-BS.*/ -0*ECHOK |/*Echo NL after kill character.*/ -0*ECHONL |/*Echo NL.*/ -0*NOFLSH |/*Disable flush after interrupt or quit.*/ -0*TOSTOP |/*Send SIGTTOU for background output.*/ -0*ECHOCTL|/*Echo control characters as ^char, delete as ^?.*/ -0*ECHOPRT|/*Echo erase character as character erased.*/ -0*ECHOKE |/*BS-SP-BS erase entire line on line kill.*/ -0*FLUSHO |/*Output is being flushed.*/ -0*PENDIN |/*Retype pending input at next read or input character.*/ -0*IEXTEN |/*Enable extended (implementation-defined) functions.*/ -#endif - - tty_smode.c_cc[VMIN] =0;/* Note that VMIN is the same as VEOF! */ - tty_smode.c_cc[VTIME] =0;/* Note that VTIME is the same as VEOL! */ - tty_smode.c_cc[VINTR] =3; - - tcsetattr(0, TCSADRAIN, &tty_smode); - -#ifdef DEBUG - show_terminal_settings(&tty_smode); -#endif - -#endif /* !__OSE__ */ - /* - * "Write a ^L to the FIFO which causes the other end to redisplay - * the input line." - * This does not seem to work as was intended in old comment above. - * However, this control character is now (R12B-3) used by run_erl - * to trigger the version handshaking between to_erl and run_erl - * at the start of every new to_erl-session. - */ - - if (write(wfd, "\014", 1) < 0) { - fprintf(stderr, "Error in writing ^L to FIFO.\n"); - } - -#ifdef __OSE__ - /* we have a tiny stack so we malloc the buffers */ - stdin_buf = malloc(sizeof(char) * BUFSIZ); - pipe_buf = malloc(sizeof(char) * BUFSIZ); - - efs_examine_fd(rfd,FLIB_FD_HANDLE,&pipe_fh); - efs_examine_fd(0,FLIB_FD_HANDLE,&stdin_fh); - READ_AIO(stdin_read_req,0,BUFSIZ,stdin_buf); - READ_AIO(pipe_read_req,rfd,BUFSIZ,pipe_buf); -#endif - - /* - * read and write - */ - while (1) { -#ifndef __OSE__ - FD_ZERO(&readfds); - FD_SET(0, &readfds); - FD_SET(rfd, &readfds); - if (select(rfd + 1, &readfds, NULL, NULL, NULL) < 0) { - if (recv_sig) { - FD_ZERO(&readfds); - } - else { - fprintf(stderr, "Error in select.\n"); - break; - } - } - len = 0; - - /* - * Read from terminal and write to FIFO - */ - if (recv_sig) { - switch (recv_sig) { - case SIGINT: - fprintf(stderr, "[Break]\n\r"); - buf[0] = '\003'; - len = 1; - break; - case SIGWINCH: - len = window_size_seq(buf,sizeof(buf)); - break; - default: - fprintf(stderr,"Unexpected signal: %u\n",recv_sig); - } - recv_sig = 0; - } - else -#else /* __OSE__ */ - SIGSELECT sigsel[] = {0}; - sig = receive(sigsel); - len = 0; -#endif -#ifndef __OSE__ - if (FD_ISSET(0,&readfds)) { - len = read(0, buf, sizeof(buf)); -#else /* __OSE__ */ - if (sig->signo == FM_READ_PTR_REPLY && - sig->fm_read_ptr.handle == stdin_fh) { - len = sig->fm_read_ptr.status == EFS_SUCCESS ? sig->fm_read_ptr.actual : -1; - buf = sig->fm_read_ptr.buffer; -#endif - if (len <= 0) { - close(rfd); - close(wfd); - if (len < 0) { - fprintf(stderr, "Error in reading from stdin.\n"); - } else { - fprintf(stderr, "[EOF]\n\r"); - } - break; - } - /* check if there is an eof character in input */ - for (i = 0; i < len-1 && buf[i] != tty_eof; i++); - if (buf[i] == tty_eof) { - fprintf(stderr, "[Quit]\n\r"); - break; - } - } - - if (len) { -#ifdef DEBUG - if(write(1, buf, len)); -#endif - if (write_all(wfd, buf, len) != len) { - fprintf(stderr, "Error in writing to FIFO.\n"); - close(rfd); - close(wfd); - break; - } - STATUS("\" OK\r\n"); -#ifdef __OSE__ - aio_dispatch(sig); - READ_AIO(stdin_read_req, 0, BUFSIZ, stdin_buf); -#endif - } - - /* - * Read from FIFO, write to terminal. - */ -#ifndef __OSE__ - if (FD_ISSET(rfd, &readfds)) { - STATUS("FIFO read: "); - len = read(rfd, buf, BUFSIZ); -#else /* __OSE__ */ - if (sig->signo == FM_READ_PTR_REPLY && - sig->fm_read_ptr.handle == pipe_fh) { - len = sig->fm_read_ptr.status == EFS_SUCCESS ? sig->fm_read_ptr.actual : -1; - buf = sig->fm_read_ptr.buffer; -#endif - if (len < 0 && errno == EAGAIN) { - /* - * No data this time, but the writing end of the FIFO is still open. - * Do nothing. - */ - ; - } else if (len <= 0) { - /* - * Either an error or end of file. In either case, break out - * of the loop. - */ - close(rfd); - close(wfd); - if (len < 0) { - fprintf(stderr, "Error in reading from FIFO.\n"); - } else - fprintf(stderr, "[End]\n\r"); - break; - } else { - if (!got_some) { - if ((len=version_handshake(buf,len,wfd)) < 0) { - close(rfd); - close(wfd); - break; - } -#ifndef __OSE__ - if (protocol_ver >= 1) { - /* Tell run_erl size of terminal window */ - signal(SIGWINCH, handle_sigwinch); - raise(SIGWINCH); - } -#endif - got_some = 1; - } - - /* - * We successfully read at least one character. Write what we got. - */ - STATUS("Terminal write: \""); - if (write_all(1, buf, len) != len) { - fprintf(stderr, "Error in writing to terminal.\n"); - close(rfd); - close(wfd); - break; - } - STATUS("\" OK\r\n"); -#ifdef __OSE__ - aio_dispatch(sig); - READ_AIO(pipe_read_req, rfd, BUFSIZ, pipe_buf); -#endif - } - } - } - -#ifndef __OSE__ - /* - * Reset terminal characterstics - * XXX - */ - tcsetattr(0, TCSADRAIN, &tty_rmode); -#endif - return 0; -} - -/* Call write() until entire buffer has been written or error. - * Return len or -1. - */ -static int write_all(int fd, const char* buf, int len) -{ - int left = len; - int written; - while (left) { - written = write(fd,buf,left); - if (written < 0) { - return -1; - } - left -= written; - buf += written; - } - return len; -} - -#ifndef __OSE__ -static int window_size_seq(char* buf, size_t bufsz) -{ -#ifdef TIOCGWINSZ - struct winsize ws; - static const char prefix[] = "\033_"; - static const char suffix[] = "\033\\"; - /* This Esc sequence is called "Application Program Command" - and seems suitable to use for our own customized stuff. */ - - if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) == 0) { - int len = sn_printf(buf, bufsz, "%swinsize=%u,%u%s", - prefix, ws.ws_col, ws.ws_row, suffix); - return len; - } -#endif /* TIOCGWINSZ */ - return 0; -} -#endif /* !__OSE__ */ - -/* to_erl run_erl - * | | - * |---------- '\014' -------->| (session start) - * | | - * |<---- "[run_erl v1-0]" ----| (version interval) - * | | - * |--- Esc_"version=1"Esc\ -->| (common version) - * | | - */ -static int version_handshake(char* buf, int len, int wfd) -{ - unsigned re_high=0, re_low; - char *end = find_str(buf,len,"]\n"); - - if (end && sscanf(buf,"[run_erl v%u-%u",&re_high,&re_low)==2) { - char wbuf[30]; - int wlen; - - if (re_low > RUN_ERL_HI_VER || re_high < RUN_ERL_LO_VER) { - fprintf(stderr,"Incompatible versions: to_erl=v%u-%u run_erl=v%u-%u\n", - RUN_ERL_HI_VER, RUN_ERL_LO_VER, re_high, re_low); - return -1; - } - /* Choose highest common version */ - protocol_ver = re_high < RUN_ERL_HI_VER ? re_high : RUN_ERL_HI_VER; - - wlen = sn_printf(wbuf, sizeof(wbuf), "\033_version=%u\033\\", - protocol_ver); - if (write_all(wfd, wbuf, wlen) < 0) { - fprintf(stderr,"Failed to send version handshake\n"); - return -1; - } - end += 2; - len -= (end-buf); - memmove(buf,end,len); - - } - else { /* we assume old run_erl without version handshake */ - protocol_ver = 0; - } - - if (re_high != RUN_ERL_HI_VER) { - fprintf(stderr,"run_erl has different version, " - "using common protocol level %u\n", protocol_ver); - } - - return len; -} - - -#if defined(DEBUG) && !defined(__OSE__) -#define S(x) ((x) > 0 ? 1 : 0) - -static void show_terminal_settings(struct termios *t) -{ - fprintf(stderr,"c_iflag:\n"); - fprintf(stderr,"Signal interrupt on break: BRKINT %d\n", S(t->c_iflag & BRKINT)); - fprintf(stderr,"Map CR to NL on input: ICRNL %d\n", S(t->c_iflag & ICRNL)); - fprintf(stderr,"Ignore break condition: IGNBRK %d\n", S(t->c_iflag & IGNBRK)); - fprintf(stderr,"Ignore CR: IGNCR %d\n", S(t->c_iflag & IGNCR)); - fprintf(stderr,"Ignore char with par. err's: IGNPAR %d\n", S(t->c_iflag & IGNPAR)); - fprintf(stderr,"Map NL to CR on input: INLCR %d\n", S(t->c_iflag & INLCR)); - fprintf(stderr,"Enable input parity check: INPCK %d\n", S(t->c_iflag & INPCK)); - fprintf(stderr,"Strip character ISTRIP %d\n", S(t->c_iflag & ISTRIP)); - fprintf(stderr,"Enable start/stop input ctrl IXOFF %d\n", S(t->c_iflag & IXOFF)); - fprintf(stderr,"ditto output ctrl IXON %d\n", S(t->c_iflag & IXON)); - fprintf(stderr,"Mark parity errors PARMRK %d\n", S(t->c_iflag & PARMRK)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_oflag:\n"); - fprintf(stderr,"Perform output processing OPOST %d\n", S(t->c_oflag & OPOST)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_cflag:\n"); - fprintf(stderr,"Ignore modem status lines CLOCAL %d\n", S(t->c_cflag & CLOCAL)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_local:\n"); - fprintf(stderr,"Enable echo ECHO %d\n", S(t->c_lflag & ECHO)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_cc:\n"); - fprintf(stderr,"c_cc[VEOF] %d\n", t->c_cc[VEOF]); -} -#endif /* DEBUG && !__OSE__ */ diff --git a/erts/etc/common/to_erl_common.h b/erts/etc/common/to_erl_common.h deleted file mode 100644 index a139da418f..0000000000 --- a/erts/etc/common/to_erl_common.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -#ifndef ERL_TO_ERL_H -#define ERL_TO_ERL_H - -#define TO_ERL_USAGE "to_erl [-h|-F] %s\n" \ - "\t-h\tThis help text.\n" \ - "\t-f\tForce connection even though pipe is locked by other to_erl process." - -int to_erl(int argc, char **argv); - -#endif diff --git a/erts/etc/ose/etc.lmconf b/erts/etc/ose/etc.lmconf deleted file mode 100644 index b402b325b1..0000000000 --- a/erts/etc/ose/etc.lmconf +++ /dev/null @@ -1,20 +0,0 @@ -OSE_LM_STACK_SIZES=256,512,1024,2048,4096,8192,16384,65536 -OSE_LM_SIGNAL_SIZES=31,63,127,255,1023,4095,16383,65535 -OSE_LM_POOL_SIZE=0x200000 -OSE_LM_MAIN_NAME=main -OSE_LM_MAIN_STACK_SIZE=0xF000 -OSE_LM_MAIN_PRIORITY=20 -## Has to be of a type that allows MAM -OSE_LM_PROGRAM_TYPE=APP_RAM -OSE_LM_DATA_INIT=YES -OSE_LM_BSS_INIT=YES -OSE_LM_EXEC_MODEL=SHARED -HEAP_MAX_SIZE=1000000000 -HEAP_SMALL_BUF_INIT_SIZE=64000000 -HEAP_LARGE_BUF_THRESHOLD=16000000 -HEAP_LOCK_TYPE=2 - -# Setting the environment variable EFS_RESOLVE_TMO on the block to 0. -# This will eliminiate delays when trying to open files on not mounted -# volumes. -EFS_RESOLVE_TMO=0 diff --git a/erts/etc/ose/run_erl.c b/erts/etc/ose/run_erl.c deleted file mode 100644 index 6775525297..0000000000 --- a/erts/etc/ose/run_erl.c +++ /dev/null @@ -1,664 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -/* - * Module: run_erl.c - * - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -/* System includes */ -#include <aio.h> -#include <errno.h> -#include <dirent.h> -#include <stdlib.h> -#include <string.h> -#include <stdio.h> -#include <sys/stat.h> -#include <unistd.h> - -/* OSE includes */ -#include "ose.h" -#include "ose_spi/ose_spi.h" -#include "efs.h" -#include "pm.h" -#include "ose_spi/fm.sig" - -/* erts includes */ -#include "run_erl.h" -#include "run_erl_common.h" -#include "safe_string.h" /* sn_printf, strn_cpy, strn_cat, etc */ - -typedef struct RunErlSetup_ { - SIGSELECT signo; - int run_daemon; - char *logdir; - char *command; - char *pipename; - char *blockname; -} RunErlSetup; - -typedef struct ProgramState_ { - /* child process */ - int ifd, ofd; - OSDOMAIN domain; - PROCESS progpid, mainbid; - struct PmProgramInfo *info; - /* to_erl */ - char w_pipe[FILENAME_BUFSIZ], - r_pipe[FILENAME_BUFSIZ]; -} ProgramState; - -union SIGNAL { - SIGSELECT signo; - RunErlSetup setup; - struct FmReadPtr fm_read_ptr; - struct FmWritePtr fm_write_ptr; -}; - -static OSBOOLEAN hunt_in_block(char *block_name, - char *process_name, - PROCESS *pid); -static int create_child_process(char *command_string, char *blockname, - ProgramState *state); - - -static OSBOOLEAN hunt_in_block(char *block_name, - char *process_name, - PROCESS *pid) { - struct OS_pid_list *list; - PROCESS block_id = OSE_ILLEGAL_PROCESS; - int i; - char *name; - - *pid = OSE_ILLEGAL_PROCESS; - - list = get_bid_list(0); - - if (!list) - return 0; - - for (i = 0; i < list->count; i++) { - - if (list->list[i] == get_bid(current_process())) - continue; - - name = (char*)get_pid_info(list->list[i], OSE_PI_NAME); - if (name) { - if (strcmp(name,block_name) == 0) { - block_id = list->list[i]; - free_buf((union SIGNAL**)&name); - break; - } - free_buf((union SIGNAL**)&name); - } - } - - free_buf((union SIGNAL**)&list); - - if (block_id == OSE_ILLEGAL_PROCESS) - return 0; - - list = get_pid_list(block_id); - - if (!list) - return 0; - - for (i = 0; i < list->count; i++) { - name = (char*)get_pid_info(list->list[i], OSE_PI_NAME); - if (name) { - if (strcmp(name,process_name) == 0) { - *pid = list->list[i]; - free_buf((union SIGNAL**)&name); - break; - } - free_buf((union SIGNAL**)&name); - } - } - - free_buf((union SIGNAL**)&list); - - if (*pid == OSE_ILLEGAL_PROCESS) - return 0; - - return 1; - -} - - -static int create_child_process(char *command_string, char *blockname, - ProgramState *state) { - char *command = command_string; - char *argv; - int i = 0; - int ret_status; - PmStatus pm_status; - int tmp_io[2]; - int fd_arr[3]; - int ifd[2], ofd[2]; - char *handle; - struct PmLoadModuleInfoReply *mod_info; - - /* Parse out cmd and argv from the command string */ - while (1) { - if (command[i] == ' ' || command[i] == '\0') { - if (command[i] == '\0') - argv = NULL; - else { - command[i] = '\0'; - argv = command_string + i + 1; - } - break; - } - i++; - } - - if (blockname) - handle = blockname; - else - handle = simple_basename(command); - - if (ose_pm_load_module_info(handle,&mod_info) == PM_SUCCESS) { - /* Already installed */ - free_buf((union SIGNAL**)&mod_info); - } else if ((pm_status = ose_pm_install_load_module(0,"ELF",command,handle,0,0,NULL)) - != PM_SUCCESS) { - ERROR1(LOG_ERR,"ose_pm_install_load_module failed - pmstatus: 0x%08x\n", - pm_status); - return 0; - } - - state->domain = PM_NEW_DOMAIN; - - pm_status = ose_pm_create_program(&state->domain, handle, 0, 0 , NULL, - &state->progpid, &state->mainbid); - - if (pm_status != PM_SUCCESS) { - if (pm_status == PM_EINSTALL_HANDLE_IN_USE) - ERROR1(LOG_ERR,"ose_pm_create_program failed - " - "install handle \"%s\" is in use. You can specify another " - "install handle by using the -block option to run_erl.\n",handle); - else - ERROR1(LOG_ERR,"ose_pm_create_program failed - pmstatus: 0x%08x\n", - pm_status); - return 0; - } - - pm_status = ose_pm_program_info(state->progpid, &state->info); - /* FIXME don't forget to free this ((union SIGNAL **)&info) */ - if (pm_status != PM_SUCCESS) { - ERROR1(LOG_ERR,"ose_pm_program_info failed - pmstatus: 0x%08x\n", - pm_status); - return 0; - } - - /* We only clone stdin+stdout, what about stderr? */ - - /* create pipes */ - if (pipe(ifd) < 0) { - if (errno == ENOENT) - ERRNO_ERR0(LOG_ERR,"The /pipe file system is not available\n"); - else - ERRNO_ERR0(LOG_ERR,"pipe ifd failed\n"); - return 0; - } - - if (pipe(ofd) < 0) { - ERRNO_ERR0(LOG_ERR,"pipe ofd failed\n"); - return 0; - } - - /* FIXME Lock? */ - - /* backup our stdin stdout */ - if ((tmp_io[0] = dup(0)) < 0) { - ERRNO_ERR0(LOG_ERR,"dup 0 failed\n"); - return 0; - } - - if ((tmp_io[1] = dup(1)) < 0) { - ERRNO_ERR0(LOG_ERR,"dup 1 failed\n"); - return 0; - } - - /* set new pipe to fd 0,1 */ - if (dup2(ifd[1], 1) < 0) { - ERRNO_ERR0(LOG_ERR,"dup2 1 failed\n"); - return 0; - } - - if (dup2(ofd[0], 0) < 0) { - ERRNO_ERR0(LOG_ERR,"dup2 0 failed\n"); - return 0; - } - - /* clone array to newly created */ - fd_arr[0] = 2; /* Number of fd's */ - fd_arr[1] = 0; - fd_arr[2] = 1; - - if ((ret_status = efs_clone_array(state->info->main_process, fd_arr)) - != EFS_SUCCESS) { - ERROR1(LOG_ERR,"efs_close_array filed, errcode: %d\n", ret_status); - return 0; - } - - if (dup2(tmp_io[1], 1) < 0) { - ERRNO_ERR0(LOG_ERR,"restoring dup2 1 failed\n"); - return 0; - } - - if (dup2(tmp_io[0], 0) < 0) { - ERRNO_ERR0(LOG_ERR,"restoring dup2 1 failed\n"); - return 0; - } - - /* close loose-ends */ - sf_close(tmp_io[0]); - sf_close(tmp_io[1]); - sf_close(ifd[1]); - sf_close(ofd[0]); - state->ifd = ifd[0]; - state->ofd = ofd[1]; - - if (argv && set_env(state->progpid, "ARGV", argv)) { - ERRNO_ERR0(LOG_ERR,"something went wrong with set_env\n"); - } - - /* - * Start the program. - */ - pm_status = ose_pm_start_program(state->progpid); - if (pm_status != PM_SUCCESS) { - ERROR1(LOG_ERR,"ose_pm_install_load_module failed - pmstatus: 0x%08x\n", - pm_status); - return 0; - } - - return 1; -} - -#define SET_AIO(REQ,FD,SIZE,BUFF) \ - /* Make sure to clean data structure of previous request */ \ - memset(&(REQ),0,sizeof(REQ)); \ - (REQ).aio_fildes = FD; \ - (REQ).aio_offset = FM_POSITION_CURRENT; \ - (REQ).aio_nbytes = SIZE; \ - (REQ).aio_buf = BUFF; \ - (REQ).aio_sigevent.sigev_notify = SIGEV_NONE - -#define READ_AIO(REQ,FD,SIZE,BUFF) do { \ - SET_AIO(REQ,FD,SIZE,BUFF); \ - if (aio_read(&(REQ)) != 0) \ - ERRNO_ERR1(LOG_ERR,"aio_read of child_read_req(%d) failed\n",FD); \ - } while (0) - -#define WRITE_AIO(FD,SIZE,BUFF) do { \ - struct aiocb *write_req = malloc(sizeof(struct aiocb)); \ - char *write_buff = malloc(sizeof(char)*SIZE); \ - memcpy(write_buff,BUFF,SIZE); \ - SET_AIO(*write_req,FD,SIZE,write_buff); \ - if (aio_write(write_req) != 0) \ - ERRNO_ERR1(LOG_ERR,"aio_write of write_req(%d) failed\n",FD); \ - } while(0) - -int pass_on(ProgramState *state); -int pass_on(ProgramState *s) { - SIGSELECT sigsel[] = {0,FM_READ_PTR_REPLY}; - union SIGNAL *sig; - char child_read_buff[BUFSIZ], pipe_read_buff[BUFSIZ]; - struct aiocb child_read_req, pipe_read_req; - int rfd, wfd = 0; - FmHandle rfh, child_rfh; - int outstanding_writes = 0, got_some = 0, child_done = 0; - - if ((rfd = sf_open(s->r_pipe, O_RDONLY, 0)) < 0) { - ERRNO_ERR1(LOG_ERR,"Could not open FIFO '%s' for reading.\n", s->r_pipe); - rfd = 0; - return 1; - } - - attach(NULL,s->progpid); - - /* Open the log file */ - erts_run_erl_log_open(); - - efs_examine_fd(rfd,FLIB_FD_HANDLE,&rfh); - efs_examine_fd(s->ifd,FLIB_FD_HANDLE,&child_rfh); - - READ_AIO(child_read_req,s->ifd,BUFSIZ,child_read_buff); - READ_AIO(pipe_read_req,rfd,BUFSIZ,pipe_read_buff); - - while (1) { - time_t now,last_activity; - - time(&last_activity); - sig = receive_w_tmo(erts_run_erl_log_alive_minutes()*60000,sigsel); - - time(&now); - - if (sig) { - erts_run_erl_log_activity(0,now,last_activity); - } else { - /* timeout */ - erts_run_erl_log_activity(1,now,last_activity); - continue; - } - - switch (sig->signo) { - case OS_ATTACH_SIG: { - if (rfd) { sf_close(rfd); rfd = 0; } - free_buf(&sig); - child_done = 1; - /* Make sure to to let all outstanding write request finish */ - if (outstanding_writes) - break; - if (wfd) sf_close(wfd); - return 0; - } - case FM_WRITE_PTR_REPLY: { - if (sig->fm_write_ptr.status == EFS_SUCCESS) { - if (sig->fm_write_ptr.actual < sig->fm_write_ptr.requested) { - WRITE_AIO(wfd, sig->fm_write_ptr.requested-sig->fm_write_ptr.actual, - sig->fm_write_ptr.buffer+sig->fm_write_ptr.actual); - } - } else { - /* Assume to_erl has terminated. */ - sf_close(wfd); - wfd = 0; - } - free((char*)sig->fm_write_ptr.buffer); - aio_dispatch(sig); - if ((--outstanding_writes == 0) && child_done) { - if (wfd) sf_close(wfd); - return 0; - } - break; - } - case FM_READ_PTR_REPLY: { - /* Child fd */ - if (sig->fm_read_ptr.handle == child_rfh) { - - /* Child terminated */ - if (sig->fm_read_ptr.status != EFS_SUCCESS || - sig->fm_read_ptr.actual == 0) { - - if (rfd) { sf_close(rfd); rfd = 0; } - - if (sig->fm_read_ptr.status != EFS_SUCCESS) { - ERROR0(LOG_ERR,"Erlang closed the connection."); - aio_dispatch(sig); - return 1; - } - - /* child closed connection gracefully */ - aio_dispatch(sig); - if (outstanding_writes) { - child_done = 1; - break; - } - - if (wfd) sf_close(wfd); - - return 0; - } else { - erts_run_erl_log_write(sig->fm_read_ptr.buffer, - sig->fm_read_ptr.actual); - if (wfd) { - WRITE_AIO(wfd, sig->fm_read_ptr.actual, sig->fm_read_ptr.buffer); - outstanding_writes++; - } - aio_dispatch(sig); - READ_AIO(child_read_req, s->ifd,BUFSIZ, child_read_buff); - } - /* pipe fd */ - } else if (sig->fm_read_ptr.handle == rfh) { - if (sig->fm_read_ptr.status != EFS_SUCCESS) { - if(rfd) sf_close(rfd); - if(wfd) sf_close(wfd); - aio_dispatch(sig); - ERRNO_ERR0(LOG_ERR,"Error in reading from FIFO."); - return 1; - } - if (sig->fm_read_ptr.actual == 0) { - /* to_erl closed its end of the pipe */ - aio_dispatch(sig); - sf_close(rfd); - rfd = sf_open(s->r_pipe,O_RDONLY|DONT_BLOCK_PLEASE, 0); - if (rfd < 0) { - ERRNO_ERR1(LOG_ERR,"Could not open FIFO '%s' for reading.", - s->r_pipe); - rfd = 0; - } else { - READ_AIO(pipe_read_req,rfd,BUFSIZ,pipe_read_buff); - } - got_some = 0; /* reset for next session */ - } else { - int len = sig->fm_read_ptr.actual; - char *buffer = sig->fm_read_ptr.buffer; - if (!wfd) { - /* Try to open the write pipe to to_erl. Now that we got some data - * from to_erl, to_erl should already be reading this pipe - open - * should succeed. But in case of error, we just ignore it. - */ - if ((wfd = sf_open(s->w_pipe, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) { - erts_run_erl_log_status("Client expected on FIFO %s, " - "but can't open (len=%d)\n", - s->w_pipe, sig->fm_read_ptr.actual); - sf_close(rfd); - rfd = sf_open(s->r_pipe, O_RDONLY|DONT_BLOCK_PLEASE, 0); - if (rfd < 0) { - ERRNO_ERR1(LOG_ERR,"Could not open FIFO '%s' for reading.", - s->r_pipe); - return 1; - } - wfd = 0; - } else { -#ifdef DEBUG - erts_run_erl_log_status("run_erl: %s opened for writing\n", - s->w_pipe); -#endif - } - } - - if (!got_some && wfd && buffer[0] == '\014') { - char wbuf[30]; - int wlen = sn_printf(wbuf,sizeof(wbuf),"[run_erl v%u-%u]\n", - RUN_ERL_HI_VER, RUN_ERL_LO_VER); - /* For some reason this, the first write aio seems to - not get an FM_WRITE_PTR_REPLY, so we do not do: - outstanding_writes++; - */ - WRITE_AIO(wfd, wlen, wbuf); - } - got_some = 1; - - /* Write the message */ -#ifdef DEBUG - erts_run_erl_log_status("Pty master write; "); -#endif - len = erts_run_erl_extract_ctrl_seq(buffer,len, s->ofd); - - if (len > 0) { - int wlen = erts_run_erl_write_all(s->ofd, buffer, len); - if (wlen != len) { - aio_dispatch(sig); - ERRNO_ERR0(LOG_ERR,"Error in writing to terminal."); - if(rfd) sf_close(rfd); - if(wfd) sf_close(wfd); - return 1; - } - } -#ifdef DEBUG - erts_run_erl_log_status("OK\n"); -#endif - aio_dispatch(sig); - READ_AIO(pipe_read_req,rfd,BUFSIZ,pipe_read_buff); - } - } - break; - } - default: { - free_buf(&sig); - break; - } - } - } -} - -OS_PROCESS(run_erl_process) { - char *logdir, *command, *blockname; - SIGSELECT sigsel[] = {1,ERTS_SIGNAL_RUN_ERL_SETUP}; - union SIGNAL *sig = receive(sigsel); - ProgramState state; - char pipename[FILENAME_BUFSIZ]; - - state.info = NULL; - - logdir = strdup(sig->setup.logdir); - command = strdup(sig->setup.command); - strn_cpy(pipename,sizeof(pipename),sig->setup.pipename); - - if (sig->setup.blockname) - blockname = strdup(sig->setup.blockname); - else - blockname = NULL; - - erts_run_erl_log_init(sig->setup.run_daemon, logdir); - - free_buf(&sig); - - if (erts_run_erl_open_fifo(pipename,state.w_pipe,state.r_pipe)) - kill_proc(current_process()); - - if (create_child_process(command,blockname,&state)) - pass_on(&state); - - free(logdir); - free(command); - if (blockname) - free(blockname); - - if (state.info) - free_buf(((union SIGNAL**)&state.info)); - - sf_close(state.ifd); - sf_close(state.ofd); - - unlink(state.w_pipe); - unlink(state.r_pipe); - - kill_proc(current_process()); -} - -int run_erl(int argc,char **argv) { - char *pipename, *logdir, *command, *blockname = NULL; - int pipename_len, logdir_len, command_len, blockname_len = 0; - int i = 1, run_daemon = 0; - PROCESS pid; - SIGSELECT sigsel[] = {0}; - union SIGNAL *sig; - - if(argc < 4) { - fprintf(stderr,RUN_ERL_USAGE,"run_erl"); - return 1; - } - - while (1) { - if (argv[i][0] != '-') - break; - if (!strcmp(argv[i],"-daemon")) { - run_daemon = 1; - i++; - continue; - } - if (!strcmp(argv[i],"-block")) { - blockname = argv[i+1]; - blockname_len = strlen(argv[i+1]) + 1; - i+=2; - continue; - } - fprintf(stderr,RUN_ERL_USAGE,"run_erl"); - return 1; - } - - pipename = argv[i++]; - logdir = argv[i++]; - command = argv[i++]; - - /* + 1 to include NULL at end */ - logdir_len = strlen(logdir) + 1; - command_len = strlen(command) + 1; - pipename_len = strlen(pipename) + 1; - - if (run_daemon) { - /* We request that the run_erl_process should be started from the - main process so that it does not die when the shell command - returns */ - PROCESS main_pid; - hunt_in_block("run_erl","main",&main_pid); - sig = alloc(sizeof(*sig),ERTS_SIGNAL_RUN_ERL_DAEMON); - send(&sig,main_pid); - sig = receive(sigsel); - pid = sender(&sig); - free_buf(&sig); - } else { - pid = create_process(OS_BG_PROC,"run_erl_process", - run_erl_process, 0x800, - 0, 0, 0, NULL, 0, 0); - } - - sig = alloc(sizeof(RunErlSetup)+ - logdir_len+command_len+pipename_len+blockname_len, - ERTS_SIGNAL_RUN_ERL_SETUP); - sig->setup.run_daemon = run_daemon; - sig->setup.logdir = ((char*)sig)+sizeof(RunErlSetup); - sig->setup.command = ((char*)sig)+sizeof(RunErlSetup)+logdir_len; - sig->setup.pipename = ((char*)sig)+sizeof(RunErlSetup)+logdir_len+command_len; - if (blockname) - sig->setup.blockname = ((char*)sig)+sizeof(RunErlSetup)+ - logdir_len+command_len+pipename_len; - else - sig->setup.blockname = NULL; - - strcpy(sig->setup.logdir,logdir); - strcpy(sig->setup.command,command); - strcpy(sig->setup.pipename,pipename); - if (blockname) strcpy(sig->setup.blockname,blockname); - - send(&sig,pid); - - if (run_daemon) { - /* We are a daemon, error msgs will be sent to ramlog */ - start(pid); - return 1; - } - - /* We are not daemon, error msgs will be sent to stderr and we block here */ - efs_clone(pid); - start(pid); - - attach(NULL,pid); - sig = receive(sigsel); - - return 1; -} diff --git a/erts/etc/ose/run_erl.h b/erts/etc/ose/run_erl.h deleted file mode 100644 index bdc8b6c355..0000000000 --- a/erts/etc/ose/run_erl.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -#ifndef ERL_RUN_ERL_H -#define ERL_RUN_ERL_H - -#include "ose.h" - -#include "erts.sig" - -int run_erl(int argc, char **argv); -OS_PROCESS(run_erl_process); - -#endif diff --git a/erts/etc/ose/run_erl_main.c b/erts/etc/ose/run_erl_main.c deleted file mode 100644 index 8895c773a1..0000000000 --- a/erts/etc/ose/run_erl_main.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ -/* - * Module: run_erl_main.c - * - * Container for load module that installs both run_erl and to_erl command. - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include <stdio.h> - -#include "ose.h" -#include "shell.h" - -#include "run_erl_common.h" -#include "run_erl.h" -#include "to_erl_common.h" - -union SIGNAL { - SIGSELECT signo; -}; - -int main(int argc, char **argv) -{ - - char run_erl_usage[320], - to_erl_usage[120]; - - (void)stdin;(void)stdout;(void)stderr; - - sprintf(run_erl_usage,RUN_ERL_USAGE,"run_erl [-daemon] [-block blockname]"); - sprintf(to_erl_usage,TO_ERL_USAGE,"pipename"); - - shell_add_cmd_attrs( - "run_erl",run_erl_usage, - "Redirect Erlang input and output streams", - run_erl,DEFAULT_PROC_TYPE,DEFAULT_PRIORITY,DEFAULT_STACK_SIZE); - - shell_add_cmd_attrs( - "to_erl",to_erl_usage, - "Attach to redirected Erlang input and output streams", - to_erl,DEFAULT_PROC_TYPE,DEFAULT_PRIORITY,DEFAULT_STACK_SIZE); - - while (1) { - static const SIGSELECT sigsel[] = {0}; - union SIGNAL *sig = receive(sigsel); - - if (sig->signo == ERTS_SIGNAL_RUN_ERL_DAEMON) { - PROCESS pid = create_process(OS_BG_PROC,"run_erl_daemon", - run_erl_process, 0x800, - 0, 0, 0, NULL, 0, 0); - send_w_s(&sig,pid,sender(&sig)); - } else { - printf("Got unexpected signal!"); - free_buf(&sig); - } - } - - return 1; -} diff --git a/erts/etc/unix/run_erl.c b/erts/etc/unix/run_erl.c index c8414030ca..44efb975ba 100644 --- a/erts/etc/unix/run_erl.c +++ b/erts/etc/unix/run_erl.c @@ -1,7 +1,7 @@ /* * %CopyrightBegin% * - * Copyright Ericsson AB 1996-2013. All Rights Reserved. + * Copyright Ericsson AB 1996-2015. All Rights Reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -41,13 +41,11 @@ #ifdef HAVE_CONFIG_H # include "config.h" #endif - #ifdef HAVE_WORKING_POSIX_OPENPT #ifndef _XOPEN_SOURCE #define _XOPEN_SOURCE 600 #endif #endif - #include <sys/types.h> #include <sys/wait.h> #include <sys/stat.h> @@ -65,6 +63,11 @@ #include <dirent.h> #include <termios.h> #include <time.h> + +#ifdef __ANDROID__ +# include <termios.h> +#endif + #ifdef HAVE_SYSLOG_H # include <syslog.h> #endif @@ -84,25 +87,81 @@ # include <stropts.h> #endif -#include "run_erl_common.h" +#include "run_erl.h" #include "safe_string.h" /* sn_printf, strn_cpy, strn_cat, etc */ +#ifdef O_NONBLOCK +# define DONT_BLOCK_PLEASE O_NONBLOCK +#else +# define DONT_BLOCK_PLEASE O_NDELAY +# ifndef EAGAIN +# define EAGAIN -3898734 +# endif +#endif + +#define noDEBUG + +#define DEFAULT_LOG_GENERATIONS 5 +#define LOG_MAX_GENERATIONS 1000 /* No more than 1000 log files */ +#define LOG_MIN_GENERATIONS 2 /* At least two to switch between */ +#define DEFAULT_LOG_MAXSIZE 100000 +#define LOG_MIN_MAXSIZE 1000 /* Smallast value for changing log file */ +#define LOG_STUBNAME "erlang.log." +#define LOG_PERM 0664 +#define DEFAULT_LOG_ACTIVITY_MINUTES 5 +#define DEFAULT_LOG_ALIVE_MINUTES 15 +#define DEFAULT_LOG_ALIVE_FORMAT "%a %b %e %T %Z %Y" +#define ALIVE_BUFFSIZ 256 + +#define PERM 0600 +#define STATUSFILENAME "/run_erl.log" +#define PIPE_STUBNAME "erlang.pipe" +#define PIPE_STUBLEN strlen(PIPE_STUBNAME) + +#ifndef FILENAME_MAX +#define FILENAME_MAX 250 +#endif + +#ifndef O_SYNC +#define O_SYNC 0 +#define USE_FSYNC 1 +#endif + #define MAX(x,y) ((x) > (y) ? (x) : (y)) +#define FILENAME_BUFSIZ FILENAME_MAX + /* prototypes */ static void usage(char *); +static int create_fifo(char *name, int perm); static int open_pty_master(char **name, int *sfd); static int open_pty_slave(char *name); static void pass_on(pid_t); static void exec_shell(char **); +static void status(const char *format,...); +static void error_logf(int priority, int line, const char *format,...); static void catch_sigchild(int); +static int next_log(int log_num); +static int prev_log(int log_num); +static int find_next_log_num(void); +static int open_log(int log_num, int flags); +static void write_to_log(int* lfd, int* log_num, char* buf, int len); static void daemon_init(void); +static char *simple_basename(char *path); static void init_outbuf(void); static int outbuf_size(void); static void clear_outbuf(void); static char* outbuf_first(void); static void outbuf_delete(int bytes); static void outbuf_append(const char* bytes, int n); +static int write_all(int fd, const char* buf, int len); +static int extract_ctrl_seq(char* buf, int len); +static void set_window_size(unsigned col, unsigned row); + +static ssize_t sf_write(int fd, const void *buffer, size_t len); +static ssize_t sf_read(int fd, void *buffer, size_t len); +static int sf_open(const char *path, int flags, mode_t mode); +static int sf_close(int fd); #ifdef DEBUG static void show_terminal_settings(struct termios *t); @@ -110,11 +169,20 @@ static void show_terminal_settings(struct termios *t); /* static data */ static char fifo1[FILENAME_BUFSIZ], fifo2[FILENAME_BUFSIZ]; +static char statusfile[FILENAME_BUFSIZ]; +static char log_dir[FILENAME_BUFSIZ]; static char pipename[FILENAME_BUFSIZ]; static FILE *stdstatus = NULL; +static int log_generations = DEFAULT_LOG_GENERATIONS; +static int log_maxsize = DEFAULT_LOG_MAXSIZE; +static int log_alive_minutes = DEFAULT_LOG_ALIVE_MINUTES; +static int log_activity_minutes = DEFAULT_LOG_ACTIVITY_MINUTES; +static int log_alive_in_gmt = 0; +static char log_alive_format[ALIVE_BUFFSIZ+1]; static int run_daemon = 0; static char *program_name; static int mfd; /* master pty fd */ +static unsigned protocol_ver = RUN_ERL_LO_VER; /* assume lowest to begin with */ /* * Output buffer. @@ -145,13 +213,29 @@ static char* outbuf_in; LOG_PID|LOG_CONS|LOG_NOWAIT,LOG_USER) #endif +#define ERROR0(Prio,Format) error_logf(Prio,__LINE__,Format"\n") +#define ERROR1(Prio,Format,A1) error_logf(Prio,__LINE__,Format"\n",A1) +#define ERROR2(Prio,Format,A1,A2) error_logf(Prio,__LINE__,Format"\n",A1,A2) + +#ifdef HAVE_STRERROR +# define ADD_ERRNO(Format) "errno=%d '%s'\n"Format"\n",errno,strerror(errno) +#else +# define ADD_ERRNO(Format) "errno=%d\n"Format"\n",errno +#endif +#define ERRNO_ERR0(Prio,Format) error_logf(Prio,__LINE__,ADD_ERRNO(Format)) +#define ERRNO_ERR1(Prio,Format,A1) error_logf(Prio,__LINE__,ADD_ERRNO(Format),A1) + + int main(int argc, char **argv) { int childpid; int sfd = -1; - char *ptyslave=NULL; + int fd; + char *p, *ptyslave=NULL; int i = 1; int off_argv; + int calculated_pipename = 0; + int highest_pipe_num = 0; program_name = argv[0]; @@ -169,16 +253,122 @@ int main(int argc, char **argv) off_argv = i; strn_cpy(pipename, sizeof(pipename), argv[i++]); - - erts_run_erl_log_init(run_daemon,argv[i]); + strn_cpy(log_dir, sizeof(log_dir), argv[i]); + strn_cpy(statusfile, sizeof(statusfile), log_dir); + strn_cat(statusfile, sizeof(statusfile), STATUSFILENAME); #ifdef DEBUG - erts_run_erl_log_status("%s: pid is : %d\n", argv[0], getpid()); + status("%s: pid is : %d\n", argv[0], getpid()); #endif - /* Open read and write fifo */ - if (erts_run_erl_open_fifo(pipename,fifo1,fifo2)) - exit(1); + /* Get values for LOG file handling from the environment */ + if ((p = getenv("RUN_ERL_LOG_ALIVE_MINUTES"))) { + log_alive_minutes = atoi(p); + if (!log_alive_minutes) { + ERROR1(LOG_ERR,"Minimum value for RUN_ERL_LOG_ALIVE_MINUTES is 1 " + "(current value is %s)",p); + } + log_activity_minutes = log_alive_minutes / 3; + if (!log_activity_minutes) { + ++log_activity_minutes; + } + } + if ((p = getenv("RUN_ERL_LOG_ACTIVITY_MINUTES"))) { + log_activity_minutes = atoi(p); + if (!log_activity_minutes) { + ERROR1(LOG_ERR,"Minimum value for RUN_ERL_LOG_ACTIVITY_MINUTES is 1 " + "(current value is %s)",p); + } + } + if ((p = getenv("RUN_ERL_LOG_ALIVE_FORMAT"))) { + if (strlen(p) > ALIVE_BUFFSIZ) { + ERROR1(LOG_ERR, "RUN_ERL_LOG_ALIVE_FORMAT can contain a maximum of " + "%d characters", ALIVE_BUFFSIZ); + } + strn_cpy(log_alive_format, sizeof(log_alive_format), p); + } else { + strn_cpy(log_alive_format, sizeof(log_alive_format), DEFAULT_LOG_ALIVE_FORMAT); + } + if ((p = getenv("RUN_ERL_LOG_ALIVE_IN_UTC")) && strcmp(p,"0")) { + ++log_alive_in_gmt; + } + if ((p = getenv("RUN_ERL_LOG_GENERATIONS"))) { + log_generations = atoi(p); + if (log_generations < LOG_MIN_GENERATIONS) + ERROR1(LOG_ERR,"Minimum RUN_ERL_LOG_GENERATIONS is %d", LOG_MIN_GENERATIONS); + if (log_generations > LOG_MAX_GENERATIONS) + ERROR1(LOG_ERR,"Maximum RUN_ERL_LOG_GENERATIONS is %d", LOG_MAX_GENERATIONS); + } + + if ((p = getenv("RUN_ERL_LOG_MAXSIZE"))) { + log_maxsize = atoi(p); + if (log_maxsize < LOG_MIN_MAXSIZE) + ERROR1(LOG_ERR,"Minimum RUN_ERL_LOG_MAXSIZE is %d", LOG_MIN_MAXSIZE); + } + + /* + * Create FIFOs and open them + */ + + if(*pipename && pipename[strlen(pipename)-1] == '/') { + /* The user wishes us to find a unique pipe name in the specified */ + /* directory */ + DIR *dirp; + struct dirent *direntp; + + calculated_pipename = 1; + dirp = opendir(pipename); + if(!dirp) { + ERRNO_ERR1(LOG_ERR,"Can't access pipe directory '%s'.", pipename); + exit(1); + } + + /* Check the directory for existing pipes */ + + while((direntp=readdir(dirp)) != NULL) { + if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) { + int num = atoi(direntp->d_name+PIPE_STUBLEN+1); + if(num > highest_pipe_num) + highest_pipe_num = num; + } + } + closedir(dirp); + strn_catf(pipename, sizeof(pipename), "%s.%d", + PIPE_STUBNAME, highest_pipe_num+1); + } /* if */ + + for(;;) { + /* write FIFO - is read FIFO for `to_erl' program */ + strn_cpy(fifo1, sizeof(fifo1), pipename); + strn_cat(fifo1, sizeof(fifo1), ".r"); + if (create_fifo(fifo1, PERM) < 0) { + ERRNO_ERR1(LOG_ERR,"Cannot create FIFO %s for writing.", fifo1); + exit(1); + } + + /* read FIFO - is write FIFO for `to_erl' program */ + strn_cpy(fifo2, sizeof(fifo2), pipename); + strn_cat(fifo2, sizeof(fifo2), ".w"); + + /* Check that nobody is running run_erl already */ + if ((fd = sf_open(fifo2, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) { + /* Open as client succeeded -- run_erl is already running! */ + sf_close(fd); + if (calculated_pipename) { + ++highest_pipe_num; + strn_catf(pipename, sizeof(pipename), "%s.%d", + PIPE_STUBNAME, highest_pipe_num+1); + continue; + } + fprintf(stderr, "Erlang already running on pipe %s.\n", pipename); + exit(1); + } + if (create_fifo(fifo2, PERM) < 0) { + ERRNO_ERR1(LOG_ERR,"Cannot create FIFO %s for reading.", fifo2); + exit(1); + } + break; + } /* * Open master pseudo-terminal @@ -250,7 +440,7 @@ int main(int argc, char **argv) sf_close(2); if (dup(sfd) != 0 || dup(sfd) != 1 || dup(sfd) != 2) { - erts_run_erl_log_status("Cannot dup\n"); + status("Cannot dup\n"); } sf_close(sfd); exec_shell(argv+off_argv); /* exec_shell expects argv[2] to be */ @@ -293,7 +483,9 @@ static void pass_on(pid_t childpid) struct timeval timeout; time_t last_activity; char buf[BUFSIZ]; - int rfd, wfd=0; + char log_alive_buffer[ALIVE_BUFFSIZ+1]; + int lognum; + int rfd, wfd=0, lfd=0; int maxfd; int ready; int got_some = 0; /* from to_erl */ @@ -308,12 +500,13 @@ static void pass_on(pid_t childpid) } #ifdef DEBUG - erts_run_erl_log_status("run_erl: %s opened for reading\n", fifo2); + status("run_erl: %s opened for reading\n", fifo2); #endif /* Open the log file */ - erts_run_erl_log_open(); + lognum = find_next_log_num(); + lfd = open_log(lognum, O_RDWR|O_APPEND|O_CREAT|O_SYNC); /* Enter the work loop */ @@ -332,8 +525,7 @@ static void pass_on(pid_t childpid) writefds_ptr = &writefds; } time(&last_activity); - /* don't assume old BSD bug */ - timeout.tv_sec = erts_run_erl_log_alive_minutes()*60; + timeout.tv_sec = log_alive_minutes*60; /* don't assume old BSD bug */ timeout.tv_usec = 0; ready = select(maxfd + 1, &readfds, writefds_ptr, NULL, &timeout); if (ready < 0) { @@ -363,7 +555,28 @@ static void pass_on(pid_t childpid) /* Check how long time we've been inactive */ time(&now); - erts_run_erl_log_activity(!ready,now,last_activity); + if(!ready || now - last_activity > log_activity_minutes*60) { + /* Either a time out: 15 minutes without action, */ + /* or something is coming in right now, but it's a long time */ + /* since last time, so let's write a time stamp this message */ + struct tm *tmptr; + if (log_alive_in_gmt) { + tmptr = gmtime(&now); + } else { + tmptr = localtime(&now); + } + if (!strftime(log_alive_buffer, ALIVE_BUFFSIZ, log_alive_format, + tmptr)) { + strn_cpy(log_alive_buffer, sizeof(log_alive_buffer), + "(could not format time in 256 positions " + "with current format string.)"); + } + log_alive_buffer[ALIVE_BUFFSIZ] = '\0'; + + sn_printf(buf, sizeof(buf), "\n===== %s%s\n", + ready?"":"ALIVE ", log_alive_buffer); + write_to_log(&lfd, &lognum, buf, strlen(buf)); + } } /* @@ -398,7 +611,7 @@ static void pass_on(pid_t childpid) */ if (FD_ISSET(mfd, &readfds)) { #ifdef DEBUG - erts_run_erl_log_status("Pty master read; "); + status("Pty master read; "); #endif if ((len = sf_read(mfd, buf, BUFSIZ)) <= 0) { sf_close(rfd); @@ -416,7 +629,7 @@ static void pass_on(pid_t childpid) exit(0); } - erts_run_erl_log_write(buf, len); + write_to_log(&lfd, &lognum, buf, len); /* * Save in the output queue. @@ -432,7 +645,7 @@ static void pass_on(pid_t childpid) */ if (FD_ISSET(rfd, &readfds)) { #ifdef DEBUG - erts_run_erl_log_status("FIFO read; "); + status("FIFO read; "); #endif if ((len = sf_read(rfd, buf, BUFSIZ)) < 0) { sf_close(rfd); @@ -461,7 +674,7 @@ static void pass_on(pid_t childpid) * should succeed. But in case of error, we just ignore it. */ if ((wfd = sf_open(fifo1, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) { - erts_run_erl_log_status("Client expected on FIFO %s, but can't open (len=%d)\n", + status("Client expected on FIFO %s, but can't open (len=%d)\n", fifo1, len); sf_close(rfd); rfd = sf_open(fifo2, O_RDONLY|DONT_BLOCK_PLEASE, 0); @@ -473,7 +686,7 @@ static void pass_on(pid_t childpid) } else { #ifdef DEBUG - erts_run_erl_log_status("run_erl: %s opened for writing\n", fifo1); + status("run_erl: %s opened for writing\n", fifo1); #endif } } @@ -489,15 +702,14 @@ static void pass_on(pid_t childpid) /* Write the message */ #ifdef DEBUG - erts_run_erl_log_status("Pty master write; "); + status("Pty master write; "); #endif - len = erts_run_erl_extract_ctrl_seq(buf, len, mfd); + len = extract_ctrl_seq(buf, len); if(len==1 && buf[0] == '\003') { kill(childpid,SIGINT); - } - else if (len>0 && erts_run_erl_write_all(mfd, buf, len) != len) - { + } + else if (len>0 && write_all(mfd, buf, len) != len) { ERRNO_ERR0(LOG_ERR,"Error in writing to terminal."); sf_close(rfd); if(wfd) sf_close(wfd); @@ -506,7 +718,7 @@ static void pass_on(pid_t childpid) } } #ifdef DEBUG - erts_run_erl_log_status("OK\n"); + status("OK\n"); #endif } } @@ -516,6 +728,173 @@ static void catch_sigchild(int sig) { } +/* + * next_log: + * Returns the index number that follows the given index number. + * (Wrapping after log_generations) + */ +static int next_log(int log_num) { + return log_num>=log_generations?1:log_num+1; +} + +/* + * prev_log: + * Returns the index number that precedes the given index number. + * (Wrapping after log_generations) + */ +static int prev_log(int log_num) { + return log_num<=1?log_generations:log_num-1; +} + +/* + * find_next_log_num() + * Searches through the log directory to check which logs that already + * exist. It finds the "hole" in the sequence, and returns the index + * number for the last log in the log sequence. If there is no hole, index + * 1 is returned. + */ +static int find_next_log_num(void) { + int i, next_gen, log_gen; + DIR *dirp; + struct dirent *direntp; + int log_exists[LOG_MAX_GENERATIONS+1]; + int stub_len = strlen(LOG_STUBNAME); + + /* Initialize exiting log table */ + + for(i=log_generations; i>=0; i--) + log_exists[i] = 0; + dirp = opendir(log_dir); + if(!dirp) { + ERRNO_ERR1(LOG_ERR,"Can't access log directory '%s'", log_dir); + exit(1); + } + + /* Check the directory for existing logs */ + + while((direntp=readdir(dirp)) != NULL) { + if(strncmp(direntp->d_name,LOG_STUBNAME,stub_len)==0) { + int num = atoi(direntp->d_name+stub_len); + if(num < 1 || num > log_generations) + continue; + log_exists[num] = 1; + } + } + closedir(dirp); + + /* Find out the next available log file number */ + + next_gen = 0; + for(i=log_generations; i>=0; i--) { + if(log_exists[i]) + if(next_gen) + break; + else + ; + else + next_gen = i; + } + + /* Find out the current log file number */ + + if(next_gen) + log_gen = prev_log(next_gen); + else + log_gen = 1; + + return log_gen; +} /* find_next_log_num() */ + +/* open_log() + * Opens a log file (with given index) for writing. Writing may be + * at the end or a trucnating write, according to flags. + * A LOGGING STARTED and time stamp message is inserted into the log file + */ +static int open_log(int log_num, int flags) +{ + char buf[FILENAME_MAX]; + time_t now; + struct tm *tmptr; + char log_buffer[ALIVE_BUFFSIZ+1]; + int lfd; + + /* Remove the next log (to keep a "hole" in the log sequence) */ + sn_printf(buf, sizeof(buf), "%s/%s%d", + log_dir, LOG_STUBNAME, next_log(log_num)); + unlink(buf); + + /* Create or continue on the current log file */ + sn_printf(buf, sizeof(buf), "%s/%s%d", log_dir, LOG_STUBNAME, log_num); + if((lfd = sf_open(buf, flags, LOG_PERM))<0){ + ERRNO_ERR1(LOG_ERR,"Can't open log file '%s'.", buf); + exit(1); + } + + /* Write a LOGGING STARTED and time stamp into the log file */ + time(&now); + if (log_alive_in_gmt) { + tmptr = gmtime(&now); + } else { + tmptr = localtime(&now); + } + if (!strftime(log_buffer, ALIVE_BUFFSIZ, log_alive_format, + tmptr)) { + strn_cpy(log_buffer, sizeof(log_buffer), + "(could not format time in 256 positions " + "with current format string.)"); + } + log_buffer[ALIVE_BUFFSIZ] = '\0'; + + sn_printf(buf, sizeof(buf), "\n=====\n===== LOGGING STARTED %s\n=====\n", + log_buffer); + if (write_all(lfd, buf, strlen(buf)) < 0) + status("Error in writing to log.\n"); + +#if USE_FSYNC + fsync(lfd); +#endif + + return lfd; +} + +/* write_to_log() + * Writes a message to a log file. If the current log file is full, + * a new log file is opened. + */ +static void write_to_log(int* lfd, int* log_num, char* buf, int len) +{ + int size; + + /* Decide if new logfile needed, and open if so */ + + size = lseek(*lfd,0,SEEK_END); + if(size+len > log_maxsize) { + sf_close(*lfd); + *log_num = next_log(*log_num); + *lfd = open_log(*log_num, O_RDWR|O_CREAT|O_TRUNC|O_SYNC); + } + + /* Write to log file */ + + if (write_all(*lfd, buf, len) < 0) { + status("Error in writing to log.\n"); + } + +#if USE_FSYNC + fsync(*lfd); +#endif +} + +/* create_fifo() + * Creates a new fifo with the given name and permission. + */ +static int create_fifo(char *name, int perm) +{ + if ((mkfifo(name, perm) < 0) && (errno != EEXIST)) + return -1; + return 0; +} + /* open_pty_master() * Find a master device, open and return fd and slave device name. @@ -712,9 +1091,9 @@ static void exec_shell(char **argv) else argv[0] = sh; argv[1] = "-c"; - erts_run_erl_log_status("Args before exec of shell:\n"); + status("Args before exec of shell:\n"); for (vp = argv, i = 0; *vp; vp++, i++) - erts_run_erl_log_status("argv[%d] = %s\n", i, *vp); + status("argv[%d] = %s\n", i, *vp); if (stdstatus) { fclose(stdstatus); } @@ -725,6 +1104,26 @@ static void exec_shell(char **argv) ERRNO_ERR0(LOG_ERR,"Could not execv"); } +/* status() + * Prints the arguments to a status file + * Works like printf (see vfrpintf) + */ +static void status(const char *format,...) +{ + va_list args; + time_t now; + + if (stdstatus == NULL) + stdstatus = fopen(statusfile, "w"); + if (stdstatus == NULL) + return; + now = time(NULL); + fprintf(stdstatus, "run_erl [%d] %s", (int)getpid(), ctime(&now)); + va_start(args, format); + vfprintf(stdstatus, format, args); + va_end(args); + fflush(stdstatus); +} static void daemon_init(void) /* As R Stevens wants it, to a certain extent anyway... */ @@ -764,10 +1163,47 @@ static void daemon_init(void) run_daemon = 1; } +/* error_logf() + * Prints the arguments to stderr or syslog + * Works like printf (see vfprintf) + */ +static void error_logf(int priority, int line, const char *format, ...) +{ + va_list args; + va_start(args, format); + +#ifdef HAVE_SYSLOG_H + if (run_daemon) { + vsyslog(priority,format,args); + } + else +#endif + { + time_t now = time(NULL); + fprintf(stderr, "run_erl:%d [%d] %s", line, (int)getpid(), ctime(&now)); + vfprintf(stderr, format, args); + } + va_end(args); +} + static void usage(char *pname) { - fprintf(stderr, "Usage: "); - fprintf(stderr, RUN_ERL_USAGE, pname); + fprintf(stderr, "Usage: %s (pipe_name|pipe_dir/) log_dir \"command [parameters ...]\"\n", pname); + fprintf(stderr, "\nYou may also set the environment variables RUN_ERL_LOG_GENERATIONS\n"); + fprintf(stderr, "and RUN_ERL_LOG_MAXSIZE to the number of log files to use and the\n"); + fprintf(stderr, "size of the log file when to switch to the next log file\n"); +} + +/* Instead of making sure basename exists, we do our own */ +static char *simple_basename(char *path) +{ + char *ptr; + for (ptr = path; *ptr != '\0'; ++ptr) { + if (*ptr == '/') { + path = ptr + 1; + } + } + return path; } static void init_outbuf(void) @@ -838,6 +1274,114 @@ static void outbuf_append(const char* buf, int n) outbuf_in += n; } +/* Call write() until entire buffer has been written or error. + * Return len or -1. + */ +static int write_all(int fd, const char* buf, int len) +{ + int left = len; + int written; + for (;;) { + written = sf_write(fd,buf,left); + if (written == left) { + return len; + } + if (written < 0) { + return -1; + } + left -= written; + buf += written; + } +} + +static ssize_t sf_read(int fd, void *buffer, size_t len) { + ssize_t n = 0; + + do { n = read(fd, buffer, len); } while (n < 0 && errno == EINTR); + + return n; +} + +static ssize_t sf_write(int fd, const void *buffer, size_t len) { + ssize_t n = 0; + + do { n = write(fd, buffer, len); } while (n < 0 && errno == EINTR); + + return n; +} + +static int sf_open(const char *path, int type, mode_t mode) { + int fd = 0; + + do { fd = open(path, type, mode); } while(fd < 0 && errno == EINTR); + + return fd; +} +static int sf_close(int fd) { + int res = 0; + + do { res = close(fd); } while(fd < 0 && errno == EINTR); + + return res; +} +/* Extract any control sequences that are ment only for run_erl + * and should not be forwarded to the pty. + */ +static int extract_ctrl_seq(char* buf, int len) +{ + static const char prefix[] = "\033_"; + static const char suffix[] = "\033\\"; + char* bufend = buf + len; + char* start = buf; + char* command; + char* end; + + for (;;) { + start = find_str(start, bufend-start, prefix); + if (!start) break; + + command = start + strlen(prefix); + end = find_str(command, bufend-command, suffix); + if (end) { + unsigned col, row; + if (sscanf(command,"version=%u", &protocol_ver)==1) { + /*fprintf(stderr,"to_erl v%u\n", protocol_ver);*/ + } + else if (sscanf(command,"winsize=%u,%u", &col, &row)==2) { + set_window_size(col,row); + } + else { + ERROR2(LOG_ERR, "Ignoring unknown ctrl command '%.*s'\n", + (int)(end-command), command); + } + + /* Remove ctrl sequence from buf */ + end += strlen(suffix); + memmove(start, end, bufend-end); + bufend -= end - start; + } + else { + ERROR2(LOG_ERR, "Missing suffix in ctrl sequence '%.*s'\n", + (int)(bufend-start), start); + break; + } + } + return bufend - buf; +} + +static void set_window_size(unsigned col, unsigned row) +{ +#ifdef TIOCSWINSZ + struct winsize ws; + ws.ws_col = col; + ws.ws_row = row; + if (ioctl(mfd, TIOCSWINSZ, &ws) < 0) { + ERRNO_ERR0(LOG_ERR,"Failed to set window size"); + } +#endif +} + + #ifdef DEBUG #define S(x) ((x) > 0 ? 1 : 0) diff --git a/erts/etc/common/run_erl_vsn.h b/erts/etc/unix/run_erl.h index 2c3e67e81c..cc70a98e52 100644 --- a/erts/etc/common/run_erl_vsn.h +++ b/erts/etc/unix/run_erl.h @@ -1,8 +1,8 @@ /* * %CopyrightBegin% - * + * * Copyright Ericsson AB 2008-2009. All Rights Reserved. - * + * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at @@ -14,7 +14,7 @@ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. - * + * * %CopyrightEnd% */ @@ -28,3 +28,4 @@ * 0: Older, without version handshake * 1: R12B-3, version handshake + window size ctrl */ + diff --git a/erts/etc/common/safe_string.c b/erts/etc/unix/safe_string.c index cdcdbf16f0..a5c11d41d8 100644 --- a/erts/etc/common/safe_string.c +++ b/erts/etc/unix/safe_string.c @@ -1,8 +1,8 @@ /* * %CopyrightBegin% - * + * * Copyright Ericsson AB 2008-2009. All Rights Reserved. - * + * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at @@ -14,12 +14,12 @@ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. - * + * * %CopyrightEnd% */ -/* +/* * Module: safe_string.c - * + * * This is a bunch of generic string operation * that are safe regarding buffer overflow. * @@ -121,3 +121,4 @@ void* memmove(void *dest, const void *src, size_t n) return dest; } #endif /* HAVE_MEMMOVE */ + diff --git a/erts/etc/common/safe_string.h b/erts/etc/unix/safe_string.h index f9d2b2023a..5a471f10de 100644 --- a/erts/etc/common/safe_string.h +++ b/erts/etc/unix/safe_string.h @@ -1,8 +1,8 @@ /* * %CopyrightBegin% - * + * * Copyright Ericsson AB 2008-2009. All Rights Reserved. - * + * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at @@ -14,12 +14,12 @@ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. - * + * * %CopyrightEnd% */ -/* +/* * Module: safe_string.h - * + * * This is an interface to a bunch of generic string operation * that are safe regarding buffer overflow. * @@ -63,3 +63,4 @@ char* find_str(const char* haystack, int size, const char* needle); #ifndef HAVE_MEMMOVE void* memmove(void *dest, const void *src, size_t n); #endif + diff --git a/erts/etc/unix/to_erl.c b/erts/etc/unix/to_erl.c index 82d3218964..0bd469727c 100644 --- a/erts/etc/unix/to_erl.c +++ b/erts/etc/unix/to_erl.c @@ -1,7 +1,7 @@ /* * %CopyrightBegin% * - * Copyright Ericsson AB 1996-2013. All Rights Reserved. + * Copyright Ericsson AB 1996-2015. All Rights Reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -17,9 +17,592 @@ * * %CopyrightEnd% */ +/* + * Module: to_erl.c + * + * This module implements a process that opens two specified FIFOs, one + * for reading and one for writing; reads from its stdin, and writes what + * it has read to the write FIF0; reads from the read FIFO, and writes to + * its stdout. + * + ________ _________ + | |--<-- pipe.r (fifo1) --<--| | + | to_erl | | run_erl | (parent) + |________|-->-- pipe.w (fifo2) -->--|_________| + ^ master pty + | + | slave pty + ____V____ + | | + | "erl" | (child) + |_________| + */ +#ifdef HAVE_CONFIG_H +# include "config.h" +#endif + +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/time.h> +#include <sys/types.h> +#include <fcntl.h> +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <termios.h> +#include <dirent.h> +#include <signal.h> +#include <errno.h> +#ifdef HAVE_SYS_IOCTL_H +# include <sys/ioctl.h> +#endif + +#include "run_erl.h" +#include "safe_string.h" /* strn_cpy, strn_catf, sn_printf, etc. */ + +#if defined(O_NONBLOCK) +# define DONT_BLOCK_PLEASE O_NONBLOCK +#else +# define DONT_BLOCK_PLEASE O_NDELAY +# if !defined(EAGAIN) +# define EAGAIN -3898734 +# endif +#endif + +#ifdef HAVE_STRERROR +# define STRERROR(x) strerror(x) +#else +# define STRERROR(x) "" +#endif + +#define noDEBUG + +#define PIPE_DIR "/tmp/" +#define PIPE_STUBNAME "erlang.pipe" +#define PIPE_STUBLEN strlen(PIPE_STUBNAME) + +#ifdef DEBUG +#define STATUS(s) { fprintf(stderr, (s)); fflush(stderr); } +#else +#define STATUS(s) +#endif + +#ifndef FILENAME_MAX +#define FILENAME_MAX 250 +#endif + +static struct termios tty_smode, tty_rmode; +static int tty_eof = 0; +static int recv_sig = 0; +static int protocol_ver = RUN_ERL_LO_VER; /* assume lowest to begin with */ + +static int write_all(int fd, const char* buf, int len); +static int window_size_seq(char* buf, size_t bufsz); +static int version_handshake(char* buf, int len, int wfd); +#ifdef DEBUG +static void show_terminal_settings(struct termios *); +#endif + +static void handle_ctrlc(int sig) +{ + /* Reinstall the handler, and signal break flag */ + signal(SIGINT,handle_ctrlc); + recv_sig = SIGINT; +} + +static void handle_sigwinch(int sig) +{ + recv_sig = SIGWINCH; +} + +static void usage(char *pname) +{ + fprintf(stderr, "Usage: %s [-h|-F] [pipe_name|pipe_dir/]\n", pname); + fprintf(stderr, "\t-h\tThis help text.\n"); + fprintf(stderr, "\t-F\tForce connection even though pipe is locked by other to_erl process.\n"); +} + +int main(int argc, char **argv) +{ + char FIFO1[FILENAME_MAX], FIFO2[FILENAME_MAX]; + int i, len, wfd, rfd; + fd_set readfds; + char buf[BUFSIZ]; + char pipename[FILENAME_MAX]; + int pipeIx = 1; + int force_lock = 0; + int got_some = 0; + + if (argc >= 2 && argv[1][0]=='-') { + switch (argv[1][1]) { + case 'h': + usage(argv[0]); + exit(1); + case 'F': + force_lock = 1; + break; + default: + fprintf(stderr,"Invalid option '%s'\n",argv[1]); + exit(1); + } + pipeIx = 2; + } + +#ifdef DEBUG + fprintf(stderr, "%s: pid is : %d\n", argv[0], (int)getpid()); +#endif + + strn_cpy(pipename, sizeof(pipename), + (argv[pipeIx] ? argv[pipeIx] : PIPE_DIR)); + + if(*pipename && pipename[strlen(pipename)-1] == '/') { + /* The user wishes us to find a pipe name in the specified */ + /* directory */ + int highest_pipe_num = 0; + DIR *dirp; + struct dirent *direntp; + + dirp = opendir(pipename); + if(!dirp) { + fprintf(stderr, "Can't access pipe directory %s: %s\n", pipename, strerror(errno)); + exit(1); + } + + /* Check the directory for existing pipes */ + + while((direntp=readdir(dirp)) != NULL) { + if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) { + int num = atoi(direntp->d_name+PIPE_STUBLEN+1); + if(num > highest_pipe_num) + highest_pipe_num = num; + } + } + closedir(dirp); + strn_catf(pipename, sizeof(pipename), (highest_pipe_num?"%s.%d":"%s"), + PIPE_STUBNAME, highest_pipe_num); + } /* if */ + + /* read FIFO */ + sn_printf(FIFO1,sizeof(FIFO1),"%s.r",pipename); + /* write FIFO */ + sn_printf(FIFO2,sizeof(FIFO2),"%s.w",pipename); + + /* Check that nobody is running to_erl on this pipe already */ + if ((wfd = open (FIFO1, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) { + /* Open as server succeeded -- to_erl is already running! */ + close(wfd); + fprintf(stderr, "Another to_erl process already attached to pipe " + "%s.\n", pipename); + if (force_lock) { + fprintf(stderr, "But we proceed anyway by force (-F).\n"); + } + else { + exit(1); + } + } + + if ((rfd = open (FIFO1, O_RDONLY|DONT_BLOCK_PLEASE, 0)) < 0) { +#ifdef DEBUG + fprintf(stderr, "Could not open FIFO %s for reading.\n", FIFO1); +#endif + fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno)); + exit(1); + } +#ifdef DEBUG + fprintf(stderr, "to_erl: %s opened for reading\n", FIFO1); +#endif + + if ((wfd = open (FIFO2, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) { +#ifdef DEBUG + fprintf(stderr, "Could not open FIFO %s for writing.\n", FIFO2); +#endif + fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno)); + close(rfd); + exit(1); + } +#ifdef DEBUG + fprintf(stderr, "to_erl: %s opened for writing\n", FIFO2); +#endif + + fprintf(stderr, "Attaching to %s (^D to exit)\n\n", pipename); + + /* Set break handler to our handler */ + signal(SIGINT,handle_ctrlc); + + /* + * Save the current state of the terminal, and set raw mode. + */ + if (tcgetattr(0, &tty_rmode) , 0) { + fprintf(stderr, "Cannot get terminals current mode\n"); + exit(-1); + } + tty_smode = tty_rmode; + tty_eof = '\004'; /* Ctrl+D to exit */ +#ifdef DEBUG + show_terminal_settings(&tty_rmode); +#endif + tty_smode.c_iflag = + 1*BRKINT |/*Signal interrupt on break.*/ + 1*IGNPAR |/*Ignore characters with parity errors.*/ + 1*ISTRIP |/*Strip character.*/ + 0; + +#if 0 +0*IGNBRK |/*Ignore break condition.*/ +0*PARMRK |/*Mark parity errors.*/ +0*INPCK |/*Enable input parity check.*/ +0*INLCR |/*Map NL to CR on input.*/ +0*IGNCR |/*Ignore CR.*/ +0*ICRNL |/*Map CR to NL on input.*/ +0*IUCLC |/*Map upper-case to lower-case on input.*/ +0*IXON |/*Enable start/stop output control.*/ +0*IXANY |/*Enable any character to restart output.*/ +0*IXOFF |/*Enable start/stop input control.*/ +0*IMAXBEL|/*Echo BEL on input line too long.*/ +#endif + + tty_smode.c_oflag = + 1*OPOST |/*Post-process output.*/ + 1*ONLCR |/*Map NL to CR-NL on output.*/ +#ifdef XTABS + 1*XTABS |/*Expand tabs to spaces. (Linux)*/ +#endif +#ifdef OXTABS + 1*OXTABS |/*Expand tabs to spaces. (FreeBSD)*/ +#endif +#ifdef NL0 + 1*NL0 |/*Select newline delays*/ +#endif +#ifdef CR0 + 1*CR0 |/*Select carriage-return delays*/ +#endif +#ifdef TAB0 + 1*TAB0 |/*Select horizontal tab delays*/ +#endif +#ifdef BS0 + 1*BS0 |/*Select backspace delays*/ +#endif +#ifdef VT0 + 1*VT0 |/*Select vertical tab delays*/ +#endif +#ifdef FF0 + 1*FF0 |/*Select form feed delays*/ +#endif + 0; + +#if 0 +0*OLCUC |/*Map lower case to upper on output.*/ +0*OCRNL |/*Map CR to NL on output.*/ +0*ONOCR |/*No CR output at column 0.*/ +0*ONLRET |/*NL performs CR function.*/ +0*OFILL |/*Use fill characters for delay.*/ +0*OFDEL |/*Fill is DEL, else NULL.*/ +0*NL1 | +0*CR1 | +0*CR2 | +0*CR3 | +0*TAB1 | +0*TAB2 | +0*TAB3 |/*Expand tabs to spaces.*/ +0*BS1 | +0*VT1 | +0*FF1 | +#endif + + /* JALI: removed setting the tty_smode.c_cflag flags, since this is not */ + /* advisable if this is a *real* terminal, such as the console. In fact */ + /* this may hang the entire machine, deep, deep down (signalling break */ + /* or toggling the abort switch doesn't help) */ + + tty_smode.c_lflag = + 0; + +#if 0 +0*ISIG |/*Enable signals.*/ +0*ICANON |/*Canonical input (erase and kill processing).*/ +0*XCASE |/*Canonical upper/lower presentation.*/ +0*ECHO |/*Enable echo.*/ +0*ECHOE |/*Echo erase character as BS-SP-BS.*/ +0*ECHOK |/*Echo NL after kill character.*/ +0*ECHONL |/*Echo NL.*/ +0*NOFLSH |/*Disable flush after interrupt or quit.*/ +0*TOSTOP |/*Send SIGTTOU for background output.*/ +0*ECHOCTL|/*Echo control characters as ^char, delete as ^?.*/ +0*ECHOPRT|/*Echo erase character as character erased.*/ +0*ECHOKE |/*BS-SP-BS erase entire line on line kill.*/ +0*FLUSHO |/*Output is being flushed.*/ +0*PENDIN |/*Retype pending input at next read or input character.*/ +0*IEXTEN |/*Enable extended (implementation-defined) functions.*/ +#endif + + tty_smode.c_cc[VMIN] =0;/* Note that VMIN is the same as VEOF! */ + tty_smode.c_cc[VTIME] =0;/* Note that VTIME is the same as VEOL! */ + tty_smode.c_cc[VINTR] =3; + + tcsetattr(0, TCSADRAIN, &tty_smode); + +#ifdef DEBUG + show_terminal_settings(&tty_smode); +#endif + /* + * "Write a ^L to the FIFO which causes the other end to redisplay + * the input line." + * This does not seem to work as was intended in old comment above. + * However, this control character is now (R12B-3) used by run_erl + * to trigger the version handshaking between to_erl and run_erl + * at the start of every new to_erl-session. + */ + + if (write(wfd, "\014", 1) < 0) { + fprintf(stderr, "Error in writing ^L to FIFO.\n"); + } + + /* + * read and write + */ + while (1) { + FD_ZERO(&readfds); + FD_SET(0, &readfds); + FD_SET(rfd, &readfds); + if (select(rfd + 1, &readfds, NULL, NULL, NULL) < 0) { + if (recv_sig) { + FD_ZERO(&readfds); + } + else { + fprintf(stderr, "Error in select.\n"); + break; + } + } + len = 0; + + /* + * Read from terminal and write to FIFO + */ + if (recv_sig) { + switch (recv_sig) { + case SIGINT: + fprintf(stderr, "[Break]\n\r"); + buf[0] = '\003'; + len = 1; + break; + case SIGWINCH: + len = window_size_seq(buf,sizeof(buf)); + break; + default: + fprintf(stderr,"Unexpected signal: %u\n",recv_sig); + } + recv_sig = 0; + } + else if (FD_ISSET(0, &readfds)) { + len = read(0, buf, sizeof(buf)); + if (len <= 0) { + close(rfd); + close(wfd); + if (len < 0) { + fprintf(stderr, "Error in reading from stdin.\n"); + } else { + fprintf(stderr, "[EOF]\n\r"); + } + break; + } + /* check if there is an eof character in input */ + for (i = 0; i < len && buf[i] != tty_eof; i++); + if (buf[i] == tty_eof) { + fprintf(stderr, "[Quit]\n\r"); + break; + } + } + + if (len) { +#ifdef DEBUG + if(write(1, buf, len)); +#endif + if (write_all(wfd, buf, len) != len) { + fprintf(stderr, "Error in writing to FIFO.\n"); + close(rfd); + close(wfd); + break; + } + STATUS("\" OK\r\n"); + } + + /* + * Read from FIFO, write to terminal. + */ + if (FD_ISSET(rfd, &readfds)) { + STATUS("FIFO read: "); + len = read(rfd, buf, BUFSIZ); + if (len < 0 && errno == EAGAIN) { + /* + * No data this time, but the writing end of the FIFO is still open. + * Do nothing. + */ + ; + } else if (len <= 0) { + /* + * Either an error or end of file. In either case, break out + * of the loop. + */ + close(rfd); + close(wfd); + if (len < 0) { + fprintf(stderr, "Error in reading from FIFO.\n"); + } else + fprintf(stderr, "[End]\n\r"); + break; + } else { + if (!got_some) { + if ((len=version_handshake(buf,len,wfd)) < 0) { + close(rfd); + close(wfd); + break; + } + if (protocol_ver >= 1) { + /* Tell run_erl size of terminal window */ + signal(SIGWINCH, handle_sigwinch); + raise(SIGWINCH); + } + got_some = 1; + } + + /* + * We successfully read at least one character. Write what we got. + */ + STATUS("Terminal write: \""); + if (write_all(1, buf, len) != len) { + fprintf(stderr, "Error in writing to terminal.\n"); + close(rfd); + close(wfd); + break; + } + STATUS("\" OK\r\n"); + } + } + } + + /* + * Reset terminal characterstics + * XXX + */ + tcsetattr(0, TCSADRAIN, &tty_rmode); + return 0; +} + +/* Call write() until entire buffer has been written or error. + * Return len or -1. + */ +static int write_all(int fd, const char* buf, int len) +{ + int left = len; + int written; + while (left) { + written = write(fd,buf,left); + if (written < 0) { + return -1; + } + left -= written; + buf += written; + } + return len; +} + +static int window_size_seq(char* buf, size_t bufsz) +{ +#ifdef TIOCGWINSZ + struct winsize ws; + static const char prefix[] = "\033_"; + static const char suffix[] = "\033\\"; + /* This Esc sequence is called "Application Program Command" + and seems suitable to use for our own customized stuff. */ + + if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) == 0) { + int len = sn_printf(buf, bufsz, "%swinsize=%u,%u%s", + prefix, ws.ws_col, ws.ws_row, suffix); + return len; + } +#endif /* TIOCGWINSZ */ + return 0; +} + +/* to_erl run_erl + * | | + * |---------- '\014' -------->| (session start) + * | | + * |<---- "[run_erl v1-0]" ----| (version interval) + * | | + * |--- Esc_"version=1"Esc\ -->| (common version) + * | | + */ +static int version_handshake(char* buf, int len, int wfd) +{ + unsigned re_high=0, re_low; + char *end = find_str(buf,len,"]\n"); + + if (end && sscanf(buf,"[run_erl v%u-%u",&re_high,&re_low)==2) { + char wbuf[30]; + int wlen; + + if (re_low > RUN_ERL_HI_VER || re_high < RUN_ERL_LO_VER) { + fprintf(stderr,"Incompatible versions: to_erl=v%u-%u run_erl=v%u-%u\n", + RUN_ERL_HI_VER, RUN_ERL_LO_VER, re_high, re_low); + return -1; + } + /* Choose highest common version */ + protocol_ver = re_high < RUN_ERL_HI_VER ? re_high : RUN_ERL_HI_VER; + + wlen = sn_printf(wbuf, sizeof(wbuf), "\033_version=%u\033\\", + protocol_ver); + if (write_all(wfd, wbuf, wlen) < 0) { + fprintf(stderr,"Failed to send version handshake\n"); + return -1; + } + end += 2; + len -= (end-buf); + memmove(buf,end,len); + + } + else { /* we assume old run_erl without version handshake */ + protocol_ver = 0; + } + + if (re_high != RUN_ERL_HI_VER) { + fprintf(stderr,"run_erl has different version, " + "using common protocol level %u\n", protocol_ver); + } + + return len; +} + -#include "to_erl_common.h" +#ifdef DEBUG +#define S(x) ((x) > 0 ? 1 : 0) -int main(int argc,char **argv) { - return to_erl(argc,argv); +static void show_terminal_settings(struct termios *t) +{ + fprintf(stderr,"c_iflag:\n"); + fprintf(stderr,"Signal interrupt on break: BRKINT %d\n", S(t->c_iflag & BRKINT)); + fprintf(stderr,"Map CR to NL on input: ICRNL %d\n", S(t->c_iflag & ICRNL)); + fprintf(stderr,"Ignore break condition: IGNBRK %d\n", S(t->c_iflag & IGNBRK)); + fprintf(stderr,"Ignore CR: IGNCR %d\n", S(t->c_iflag & IGNCR)); + fprintf(stderr,"Ignore char with par. err's: IGNPAR %d\n", S(t->c_iflag & IGNPAR)); + fprintf(stderr,"Map NL to CR on input: INLCR %d\n", S(t->c_iflag & INLCR)); + fprintf(stderr,"Enable input parity check: INPCK %d\n", S(t->c_iflag & INPCK)); + fprintf(stderr,"Strip character ISTRIP %d\n", S(t->c_iflag & ISTRIP)); + fprintf(stderr,"Enable start/stop input ctrl IXOFF %d\n", S(t->c_iflag & IXOFF)); + fprintf(stderr,"ditto output ctrl IXON %d\n", S(t->c_iflag & IXON)); + fprintf(stderr,"Mark parity errors PARMRK %d\n", S(t->c_iflag & PARMRK)); + fprintf(stderr,"\n"); + fprintf(stderr,"c_oflag:\n"); + fprintf(stderr,"Perform output processing OPOST %d\n", S(t->c_oflag & OPOST)); + fprintf(stderr,"\n"); + fprintf(stderr,"c_cflag:\n"); + fprintf(stderr,"Ignore modem status lines CLOCAL %d\n", S(t->c_cflag & CLOCAL)); + fprintf(stderr,"\n"); + fprintf(stderr,"c_local:\n"); + fprintf(stderr,"Enable echo ECHO %d\n", S(t->c_lflag & ECHO)); + fprintf(stderr,"\n"); + fprintf(stderr,"c_cc:\n"); + fprintf(stderr,"c_cc[VEOF] %d\n", t->c_cc[VEOF]); } +#endif diff --git a/erts/include/internal/ethr_mutex.h b/erts/include/internal/ethr_mutex.h index f76c4262ca..b402a139f5 100644 --- a/erts/include/internal/ethr_mutex.h +++ b/erts/include/internal/ethr_mutex.h @@ -98,7 +98,7 @@ void LeaveCriticalSection(CRITICAL_SECTION *); #if 0 # define ETHR_MTX_Q_LOCK_SPINLOCK__ # define ETHR_MTX_QLOCK_TYPE__ ethr_spinlock_t -#elif defined(ETHR_PTHREADS) || defined(ETHR_OSE_THREADS) +#elif defined(ETHR_PTHREADS) # define ETHR_MTX_Q_LOCK_PTHREAD_MUTEX__ # define ETHR_MTX_QLOCK_TYPE__ pthread_mutex_t #elif defined(ETHR_WIN32_THREADS) @@ -211,7 +211,7 @@ struct ethr_cond_ { #endif }; -#elif (defined(ETHR_PTHREADS) || defined(ETHR_OSE_THREADS)) && !defined(ETHR_DBG_WIN_MTX_WITH_PTHREADS) +#elif defined(ETHR_PTHREADS) && !defined(ETHR_DBG_WIN_MTX_WITH_PTHREADS) typedef struct ethr_mutex_ ethr_mutex; struct ethr_mutex_ { @@ -355,7 +355,7 @@ void ethr_rwmutex_rwunlock(ethr_rwmutex *); #ifdef ETHR_MTX_HARD_DEBUG #define ETHR_MTX_HARD_ASSERT(A) \ - ((void) ((A) ? 1 : ethr_assert_failed(__FILE__, __LINE__, __func__,#A))) + ((void) ((A) ? 1 : ethr_assert_failed(__FILE__, __LINE__, __func__, #A))) #else #define ETHR_MTX_HARD_ASSERT(A) ((void) 1) #endif @@ -634,7 +634,7 @@ ETHR_INLINE_MTX_FUNC_NAME_(ethr_mutex_unlock)(ethr_mutex *mtx) #endif /* ETHR_TRY_INLINE_FUNCS */ -#elif (defined(ETHR_PTHREADS) || defined(ETHR_OSE_THREADS)) && !defined(ETHR_DBG_WIN_MTX_WITH_PTHREADS) +#elif defined(ETHR_PTHREADS) && !defined(ETHR_DBG_WIN_MTX_WITH_PTHREADS) #if defined(ETHR_TRY_INLINE_FUNCS) || defined(ETHR_MUTEX_IMPL__) diff --git a/erts/include/internal/ethread.h b/erts/include/internal/ethread.h index f9c203e97c..899aa4ad3c 100644 --- a/erts/include/internal/ethread.h +++ b/erts/include/internal/ethread.h @@ -193,28 +193,6 @@ typedef DWORD ethr_tsd_key; #define ETHR_YIELD() (Sleep(0), 0) -#elif defined(ETHR_OSE_THREADS) - -#include "ose.h" -#undef NIL - -#if defined(ETHR_HAVE_PTHREAD_H) -#include <pthread.h> -#endif - -typedef struct { - PROCESS id; - unsigned int tsd_key_index; - void *res; -} ethr_tid; - -typedef OSPPDKEY ethr_tsd_key; - -#undef ETHR_HAVE_ETHR_SIG_FUNCS - -/* Out own RW mutexes are probably faster, but use OSEs mutexes */ -#define ETHR_USE_OWN_RWMTX_IMPL__ - #else /* No supported thread lib found */ #ifdef ETHR_NO_SUPP_THR_LIB_NOT_FATAL @@ -382,19 +360,7 @@ extern ethr_runtime_t ethr_runtime__; #include "ethr_atomics.h" /* The atomics API */ -#if defined (ETHR_OSE_THREADS) -static ETHR_INLINE void -ose_yield(void) -{ - if (get_ptype(current_process()) == OS_PRI_PROC) { - set_pri(get_pri(current_process())); - } else { - delay(1); - } -} -#endif - -#if defined(__GNUC__) && !defined(ETHR_OSE_THREADS) +#if defined(__GNUC__) # ifndef ETHR_SPIN_BODY # if defined(__i386__) || defined(__x86_64__) # define ETHR_SPIN_BODY __asm__ __volatile__("rep;nop" : : : "memory") @@ -410,20 +376,9 @@ ose_yield(void) # ifndef ETHR_SPIN_BODY # define ETHR_SPIN_BODY do {YieldProcessor();ETHR_COMPILER_BARRIER;} while(0) # endif -#elif defined(ETHR_OSE_THREADS) -# ifndef ETHR_SPIN_BODY -# define ETHR_SPIN_BODY ose_yield() -# else -# error "OSE should use ose_yield()" -# endif #endif -#ifndef ETHR_OSE_THREADS #define ETHR_YIELD_AFTER_BUSY_LOOPS 50 -#else -#define ETHR_YIELD_AFTER_BUSY_LOOPS 0 -#endif - #ifndef ETHR_SPIN_BODY # define ETHR_SPIN_BODY ETHR_COMPILER_BARRIER @@ -446,18 +401,13 @@ ose_yield(void) # else # define ETHR_YIELD() (pthread_yield(), 0) # endif -# elif defined(ETHR_OSE_THREADS) -# define ETHR_YIELD() (ose_yield(), 0) # else # define ETHR_YIELD() (ethr_compiler_barrier(), 0) # endif #endif -#if defined(VALGRIND) || defined(ETHR_OSE_THREADS) -/* mutex as fallback for spinlock for VALGRIND and OSE. - OSE cannot use spinlocks as processes working on the - same execution unit have a tendency to deadlock. - */ +#if defined(VALGRIND) +/* mutex as fallback for spinlock for VALGRIND. */ # undef ETHR_HAVE_NATIVE_SPINLOCKS # undef ETHR_HAVE_NATIVE_RWSPINLOCKS #else @@ -504,16 +454,9 @@ typedef struct { int detached; /* boolean (default false) */ int suggested_stack_size; /* kilo words (default sys dependent) */ char *name; /* max 14 char long (default no-name) */ -#ifdef ETHR_OSE_THREADS - U32 coreNo; -#endif } ethr_thr_opts; -#if defined(ETHR_OSE_THREADS) -#define ETHR_THR_OPTS_DEFAULT_INITER {0, -1, NULL, 0} -#else #define ETHR_THR_OPTS_DEFAULT_INITER {0, -1, NULL} -#endif #if !defined(ETHR_TRY_INLINE_FUNCS) || defined(ETHR_AUX_IMPL__) # define ETHR_NEED_SPINLOCK_PROTOTYPES__ @@ -627,8 +570,6 @@ typedef struct ethr_ts_event_ ethr_ts_event; /* Needed by ethr_mutex.h */ # include "win/ethr_event.h" #elif defined(ETHR_PTHREADS) # include "pthread/ethr_event.h" -#elif defined(ETHR_OSE_THREADS) -# include "ose/ethr_event.h" #endif int ethr_set_main_thr_status(int, int); @@ -718,37 +659,6 @@ ETHR_INLINE_FUNC_NAME_(ethr_leave_ts_event)(ethr_ts_event *tsep) #endif -#elif defined (ETHR_OSE_THREADS) - -#if defined(ETHR_TRY_INLINE_FUNCS) || defined(ETHREAD_IMPL__) - -extern ethr_tsd_key ethr_ts_event_key__; - -static ETHR_INLINE ethr_ts_event * -ETHR_INLINE_FUNC_NAME_(ethr_get_ts_event)(void) -{ - ethr_ts_event *tsep = *(ethr_ts_event**)ose_get_ppdata(ethr_ts_event_key__); - if (!tsep) { - int res = ethr_get_tmp_ts_event__(&tsep); - if (res != 0) - ETHR_FATAL_ERROR__(res); - ETHR_ASSERT(tsep); - } - return tsep; -} - -static ETHR_INLINE void -ETHR_INLINE_FUNC_NAME_(ethr_leave_ts_event)(ethr_ts_event *tsep) -{ - if (tsep->iflgs & ETHR_TS_EV_TMP) { - int res = ethr_free_ts_event__(tsep); - if (res != 0) - ETHR_FATAL_ERROR__(res); - } -} - -#endif - #endif #include "ethr_mutex.h" /* Need atomic declarations and tse */ diff --git a/erts/include/internal/ose/ethr_event.h b/erts/include/internal/ose/ethr_event.h deleted file mode 100644 index c18f30aa4a..0000000000 --- a/erts/include/internal/ose/ethr_event.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2009-2011. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -/* - * Author: Rickard Green - */ - -//#define USE_PTHREAD_API - -#define ETHR_EVENT_OFF_WAITER__ -1L -#define ETHR_EVENT_OFF__ 1L -#define ETHR_EVENT_ON__ 0L - -#ifdef USE_PTHREAD_API - -typedef struct { - ethr_atomic32_t state; - pthread_mutex_t mtx; - pthread_cond_t cnd; -} ethr_event; - -#if defined(ETHR_TRY_INLINE_FUNCS) || defined(ETHR_EVENT_IMPL__) - -static void ETHR_INLINE -ETHR_INLINE_FUNC_NAME_(ethr_event_set)(ethr_event *e) -{ - ethr_sint32_t val; - val = ethr_atomic32_xchg_mb(&e->state, ETHR_EVENT_ON__); - if (val == ETHR_EVENT_OFF_WAITER__) { - int res = pthread_mutex_lock(&e->mtx); - if (res != 0) - ETHR_FATAL_ERROR__(res); - res = pthread_cond_signal(&e->cnd); - if (res != 0) - ETHR_FATAL_ERROR__(res); - res = pthread_mutex_unlock(&e->mtx); - if (res != 0) - ETHR_FATAL_ERROR__(res); - } -} - -static void ETHR_INLINE -ETHR_INLINE_FUNC_NAME_(ethr_event_reset)(ethr_event *e) -{ - ethr_atomic32_set(&e->state, ETHR_EVENT_OFF__); - ETHR_MEMORY_BARRIER; -} - -#endif - -#else - -typedef struct { - ethr_atomic32_t state; - PROCESS proc; -} ethr_event; - -#if defined(ETHR_TRY_INLINE_FUNCS) || defined(ETHR_EVENT_IMPL__) - -static void ETHR_INLINE -ETHR_INLINE_FUNC_NAME_(ethr_event_set)(ethr_event *e) -{ - ethr_sint32_t val = ethr_atomic32_xchg_mb(&e->state, ETHR_EVENT_ON__); - if (val == ETHR_EVENT_OFF_WAITER__) { -#ifdef DEBUG - OSFSEMVAL fsem_val = get_fsem(e->proc); - - /* There is a race in this assert. - This is because the state is set before the wait call in wait__. - We hope that a delay of 10 ms is enough */ - if (fsem_val == 0) - delay(10); - ETHR_ASSERT(get_fsem(e->proc) == -1); -#endif - signal_fsem(e->proc); - } -} - -static void ETHR_INLINE -ETHR_INLINE_FUNC_NAME_(ethr_event_reset)(ethr_event *e) -{ - ethr_atomic32_set(&e->state, ETHR_EVENT_OFF__); - ETHR_MEMORY_BARRIER; -} - -#endif - -#endif - -int ethr_event_init(ethr_event *e); -int ethr_event_destroy(ethr_event *e); -int ethr_event_wait(ethr_event *e); -int ethr_event_swait(ethr_event *e, int spincount); -#if !defined(ETHR_TRY_INLINE_FUNCS) || defined(ETHR_EVENT_IMPL__) -void ethr_event_set(ethr_event *e); -void ethr_event_reset(ethr_event *e); -#endif diff --git a/erts/lib_src/common/erl_misc_utils.c b/erts/lib_src/common/erl_misc_utils.c index 1262c50718..053217304b 100644 --- a/erts/lib_src/common/erl_misc_utils.c +++ b/erts/lib_src/common/erl_misc_utils.c @@ -160,8 +160,6 @@ erts_milli_sleep(long ms) if (ms > 0) { #ifdef __WIN32__ Sleep((DWORD) ms); -#elif defined(__OSE__) - delay(ms); #else struct timeval tv; tv.tv_sec = ms / 1000; @@ -320,10 +318,6 @@ erts_cpu_info_update(erts_cpu_info_t *cpuinfo) online = 0; #endif } -#elif defined(__OSE__) - online = ose_num_cpus(); - configured = ose_num_cpus(); - available = ose_num_cpus(); #endif if (online > configured) diff --git a/erts/lib_src/common/ethr_aux.c b/erts/lib_src/common/ethr_aux.c index 0cbb1b2fb8..56fecf81b8 100644 --- a/erts/lib_src/common/ethr_aux.c +++ b/erts/lib_src/common/ethr_aux.c @@ -207,18 +207,7 @@ ethr_init_common__(ethr_init_data *id) ethr_min_stack_size__ = ETHR_B2KW(ethr_min_stack_size__); -#ifdef __OSE__ - /* For supervisor processes, OSE adds a number of bytes to the requested stack. With this - * addition, the resulting size must not exceed the largest available stack size. The number - * of bytes that will be added is configured in the monolith and can therefore not be - * specified here. We simply assume that it is less than 0x1000. The available stack sizes - * are configured in the .lmconf file and the largest one is usually 65536 bytes. - * Consequently, the requested stack size is limited to 0xF000. - */ - ethr_max_stack_size__ = 0xF000; -#else ethr_max_stack_size__ = 32*1024*1024; -#endif #if SIZEOF_VOID_P == 8 ethr_max_stack_size__ *= 2; #endif @@ -664,10 +653,6 @@ ETHR_IMPL_NORETURN__ ethr_fatal_error__(const char *file, int ethr_assert_failed(const char *file, int line, const char *func, char *a) { fprintf(stderr, "%s:%d: %s(): Assertion failed: %s\n", file, line, func, a); -#ifdef __OSE__ - ramlog_printf("%d: %s:%d: %s(): Assertion failed: %s\n", - current_process(),file, line, func, a); -#endif ethr_abort__(); return 0; } diff --git a/erts/lib_src/common/ethr_mutex.c b/erts/lib_src/common/ethr_mutex.c index 72aa34ec1c..a596e6c31c 100644 --- a/erts/lib_src/common/ethr_mutex.c +++ b/erts/lib_src/common/ethr_mutex.c @@ -1250,7 +1250,7 @@ ethr_cond_wait(ethr_cond *cnd, ethr_mutex *mtx) return 0; } -#elif (defined(ETHR_PTHREADS) || defined(ETHR_OSE_THREADS)) && !defined(ETHR_DBG_WIN_MTX_WITH_PTHREADS) +#elif defined(ETHR_PTHREADS) && !defined(ETHR_DBG_WIN_MTX_WITH_PTHREADS) /* -- pthread mutex and condition variables -------------------------------- */ int diff --git a/erts/lib_src/ose/ethr_event.c b/erts/lib_src/ose/ethr_event.c deleted file mode 100644 index 24ea191c4b..0000000000 --- a/erts/lib_src/ose/ethr_event.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2009-2010. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -/* - * Author: Rickard Green - */ - -#define ETHR_INLINE_FUNC_NAME_(X) X ## __ -#define ETHR_EVENT_IMPL__ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "ethread.h" - -#ifdef USE_PTHREAD_API - -int -ethr_event_init(ethr_event *e) -{ - int res; - ethr_atomic32_init(&e->state, ETHR_EVENT_OFF__); - res = pthread_mutex_init(&e->mtx, NULL); - if (res != 0) - return res; - res = pthread_cond_init(&e->cnd, NULL); - if (res != 0) { - pthread_mutex_destroy(&e->mtx); - return res; - } - return 0; -} - -int -ethr_event_destroy(ethr_event *e) -{ - int res; - res = pthread_mutex_destroy(&e->mtx); - if (res != 0) - return res; - res = pthread_cond_destroy(&e->cnd); - if (res != 0) - return res; - return 0; -} - -static ETHR_INLINE int -wait__(ethr_event *e, int spincount) -{ - int sc = spincount; - ethr_sint32_t val; - int res, ulres; - int until_yield = ETHR_YIELD_AFTER_BUSY_LOOPS; - - if (spincount < 0) - ETHR_FATAL_ERROR__(EINVAL); - - while (1) { - val = ethr_atomic32_read(&e->state); - if (val == ETHR_EVENT_ON__) - return 0; - if (sc == 0) - break; - sc--; - ETHR_SPIN_BODY; - if (--until_yield == 0) { - until_yield = ETHR_YIELD_AFTER_BUSY_LOOPS; - res = ETHR_YIELD(); - if (res != 0) - ETHR_FATAL_ERROR__(res); - } - } - - if (val != ETHR_EVENT_OFF_WAITER__) { - val = ethr_atomic32_cmpxchg(&e->state, - ETHR_EVENT_OFF_WAITER__, - ETHR_EVENT_OFF__); - if (val == ETHR_EVENT_ON__) - return 0; - ETHR_ASSERT(val == ETHR_EVENT_OFF__); - } - - ETHR_ASSERT(val == ETHR_EVENT_OFF_WAITER__ - || val == ETHR_EVENT_OFF__); - - res = pthread_mutex_lock(&e->mtx); - if (res != 0) - ETHR_FATAL_ERROR__(res); - - while (1) { - - val = ethr_atomic32_read(&e->state); - if (val == ETHR_EVENT_ON__) - break; - - res = pthread_cond_wait(&e->cnd, &e->mtx); - if (res == EINTR) - break; - if (res != 0) - ETHR_FATAL_ERROR__(res); - } - - ulres = pthread_mutex_unlock(&e->mtx); - if (ulres != 0) - ETHR_FATAL_ERROR__(ulres); - - return res; /* 0 || EINTR */ -} - -#else -/* --- OSE implementation of events ---------------------------- */ - -#ifdef DEBUG -union SIGNAL { - SIGSELECT signo; -}; -#endif - -int -ethr_event_init(ethr_event *e) -{ - ethr_atomic32_init(&e->state, ETHR_EVENT_OFF__); - e->proc = current_process(); - return 0; -} - -int -ethr_event_destroy(ethr_event *e) -{ - return 0; -} - -static ETHR_INLINE int -wait__(ethr_event *e, int spincount) -{ - int sc = spincount; - int res; - int until_yield = ETHR_YIELD_AFTER_BUSY_LOOPS; - - if (spincount < 0) - ETHR_FATAL_ERROR__(EINVAL); - - ETHR_ASSERT(e->proc == current_process()); - ETHR_ASSERT(get_fsem(current_process()) == 0); - - while (1) { - ethr_sint32_t val; - while (1) { - val = ethr_atomic32_read(&e->state); - if (val == ETHR_EVENT_ON__) - return 0; - if (sc == 0) - break; - sc--; - ETHR_SPIN_BODY; - if (--until_yield == 0) { - until_yield = ETHR_YIELD_AFTER_BUSY_LOOPS; - res = ETHR_YIELD(); - if (res != 0) - ETHR_FATAL_ERROR__(res); - } - } - if (val != ETHR_EVENT_OFF_WAITER__) { - val = ethr_atomic32_cmpxchg(&e->state, - ETHR_EVENT_OFF_WAITER__, - ETHR_EVENT_OFF__); - if (val == ETHR_EVENT_ON__) - return 0; - ETHR_ASSERT(val == ETHR_EVENT_OFF__); - } - - wait_fsem(1); - - ETHR_ASSERT(get_fsem(current_process()) == 0); - } -} - -#endif - -void -ethr_event_reset(ethr_event *e) -{ - ethr_event_reset__(e); -} - -void -ethr_event_set(ethr_event *e) -{ - ethr_event_set__(e); -} - -int -ethr_event_wait(ethr_event *e) -{ - return wait__(e, 0); -} - -int -ethr_event_swait(ethr_event *e, int spincount) -{ - return wait__(e, spincount); -} diff --git a/erts/lib_src/ose/ethread.c b/erts/lib_src/ose/ethread.c deleted file mode 100644 index dc16acdd08..0000000000 --- a/erts/lib_src/ose/ethread.c +++ /dev/null @@ -1,833 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2010-2011. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -/* - * Description: OSE implementation of the ethread library - * Author: Lukas Larsson - */ - - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "stdio.h" -#ifdef ETHR_TIME_WITH_SYS_TIME -# include "time.h" -# include "sys/time.h" -#else -# ifdef ETHR_HAVE_SYS_TIME_H -# include "sys/time.h" -# else -# include "time.h" -# endif -#endif -#include "sys/types.h" -#include "unistd.h" - -#include "limits.h" - -#define ETHR_INLINE_FUNC_NAME_(X) X ## __ -#define ETHREAD_IMPL__ - -#include "ethread.h" -#include "ethr_internal.h" - -#include "erl_printf.h" -#include "efs.h" -#include "ose.h" - -#include "ose_spi.h" - -#include "string.h" -#include "ctype.h" -#include "stdlib.h" - -#ifndef ETHR_HAVE_ETHREAD_DEFINES -#error Missing configure defines -#endif - -#define ETHR_INVALID_TID_ID -1 - -#define DEFAULT_PRIO_NAME "ERTS_ETHR_DEFAULT_PRIO" - -/* Set the define to 1 to get some logging */ -#if 0 -#include "ramlog.h" -#define LOG(output) ramlog_printf output -#else -#define LOG(output) -#endif - -static ethr_tid main_thr_tid; -static const char* own_tid_key = "ethread_own_tid"; -ethr_tsd_key ethr_ts_event_key__; - -#define ETHREADWRAPDATASIG 1 - -/* Init data sent to thr_wrapper() */ -typedef struct { - SIGSELECT sig_no; - ethr_ts_event *tse; - ethr_tid *tid; - ethr_sint32_t result; - void *(*thr_func)(void *); - void *arg; - void *prep_func_res; - const char *name; -} ethr_thr_wrap_data__; - -union SIGNAL { - SIGSELECT sig_no; - ethr_thr_wrap_data__ data; -}; - -#define ETHR_GET_OWN_TID__ ((ethr_tid *) get_envp(current_process(),\ - own_tid_key)) - -/* - * -------------------------------------------------------------------------- - * Static functions - * -------------------------------------------------------------------------- - */ - -/* Will retrive the instrinsic name by removing the 'prefix' and the - * suffix from 'name'. - * The 'prefix' is given as an inparameter. If NULL or an empty string no - * prefix will be removed. - * If 'strip_suffix' is 1 suffixes in the form of '_123' will be removed. - * Will return a pointer to a newly allocated buffer containing the intrinsic - * name in uppercase characters. - * The caller must remember to free this buffer when no lnger needed. - */ -static char * -ethr_intrinsic_name(const char *name, const char *prefix, int strip_suffix) -{ - const char *start = name; - const char *end = name + strlen(name); - char *intrinsic_name = NULL; - int i; - - if (name == NULL) { - LOG(("ERTS - ethr_intrinsic_namNo input name.\n")); - return NULL; - } - - /* take care of the prefix */ - if ((prefix != NULL) && (*prefix != '\0')) { - const char *found = strstr(name, prefix); - - if (found == name) { - /* found the prefix at the beginning */ - start += strlen(prefix); - } - } - - /* take care of the suffix */ - if (strip_suffix) { - const char *suffix_start = strrchr(start, '_'); - - if (suffix_start != NULL) { - const char *ch; - int only_numbers = 1; - - for (ch = suffix_start + 1; *ch != '\0'; ch++) { - if (strchr("0123456789", *ch) == NULL) { - only_numbers = 0; - break; - } - } - - if (only_numbers) { - end = suffix_start; - } - } - } - - intrinsic_name = malloc(end - start + 1); - for (i = 0; (start + i) < end; i++) { - intrinsic_name[i] = toupper(start[i]); - } - intrinsic_name[i] = '\0'; - - return intrinsic_name; -} - -static char * -ethr_get_amended_env(const char *name, const char *prefix, const char *suffix) -{ - unsigned len; - char *env_name = NULL; - char *env_value = NULL; - - if (name == NULL) { - return NULL; - } - - len = strlen(name); - - if (prefix != NULL) { - len += strlen(prefix); - } - - if (suffix != NULL) { - len += strlen(suffix); - } - - env_name = malloc(len + 1); - sprintf(env_name, "%s%s%s", (prefix != NULL) ? prefix : "", - name, - (suffix != NULL) ? suffix : ""); - env_value = get_env(get_bid(current_process()), env_name); - - if (env_value == NULL) { - LOG(("ERTS - ethr_get_amended_env(): %s environment variable not present\n", env_name)); - } else { - LOG(("ERTS - ethr_get_amended_env(): Found %s environment variable: %s.\n", env_name, env_value)); - } - free(env_name); - - return env_value; -} - -/* Reads the environment variable derived from 'name' and interprets it as as an - * OSE priority. If successfull it will update 'out_prio'. - * Returns: 0 if successfull - * -1 orherwise. - */ -static int -ethr_get_prio(const char *name, OSPRIORITY *out_prio) -{ - int rc = -1; - char *intrinsic_name = NULL; - char *prio_env = NULL; - long prio; - char *endptr = NULL; - - LOG(("ERTS - ethr_get_prio(): name: %s.\n", name)); - - intrinsic_name = ethr_intrinsic_name(name, NULL, 1); - LOG(("ERTS - ethr_get_prio(): Intrinsic name: %s.\n", intrinsic_name)); - - prio_env = ethr_get_amended_env(intrinsic_name, "ERTS_", "_PRIO"); - if (prio_env == NULL) { - goto fini; - } - - prio = efs_str_to_long(prio_env, (const char **)&endptr); - if (endptr != NULL) { - LOG(("ERTS - ethr_get_prio(): Environment varible for '%s' includes " - "non-numerical characters: '%s'.\n", intrinsic_name, prio_env)); - goto fini; - } - - if ((prio < 0) || (prio > 32)) { - LOG(("ERTS - ethr_get_prio(): prio for '%s' (%d) is out of bounds (0-32).\n", - intrinsic_name, prio)); - goto fini; - } - - /* Success */ - *out_prio = (OSPRIORITY)prio; - rc = 0; - -fini: - if (intrinsic_name != NULL) { - free(intrinsic_name); - } - if (prio_env != NULL) { - free_buf((union SIGNAL **) &prio_env); - } - - return rc; -} - -static PROCESS blockId(void) { - static PROCESS bid = (PROCESS)0; - - /* For now we only use the same block. */ - /* if (bid == 0) { - bid = create_block("Erlang-VM", 0, 0, 0, 0); - } - return bid; */ - return 0; -} - -static void thr_exit_cleanup(ethr_tid *tid, void *res) -{ - - ETHR_ASSERT(tid == ETHR_GET_OWN_TID__); - - tid->res = res; - - ethr_run_exit_handlers__(); - ethr_ts_event_destructor__((void *) ethr_get_tse__()); -} - -//static OS_PROCESS(thr_wrapper); -static OS_PROCESS(thr_wrapper) -{ - ethr_tid my_tid; - ethr_sint32_t result; - void *res; - void *(*thr_func)(void *); - void *arg; - ethr_ts_event *tsep = NULL; - -#ifdef DEBUG - { - PROCESS pid = current_process(); - - const char *execMode; - - PROCESS bid = get_bid(pid); - - /* In the call below, 16 is a secret number provided by frbr that makes - * the function return current domain. */ - OSADDRESS domain = get_pid_info(current_process(), 16); - -#ifdef HAVE_OSE_SPI_H - execMode = get_pid_info(pid, OSE_PI_SUPERVISOR) - ? "Supervisor" - : "User"; -#else - execMode = "unknown"; -#endif - - fprintf(stderr,"[0x%x] New process. Bid:0x%x, domain:%d, exec mode:%s\n", - current_process(), bid, domain, execMode); - } -#endif - - { - SIGSELECT sigsel[] = {1,ETHREADWRAPDATASIG}; - union SIGNAL *init_msg = receive(sigsel); - - thr_func = init_msg->data.thr_func; - arg = init_msg->data.arg; - - result = (ethr_sint32_t) ethr_make_ts_event__(&tsep); - - if (result == 0) { - tsep->iflgs |= ETHR_TS_EV_ETHREAD; - my_tid = *init_msg->data.tid; - set_envp(current_process(), own_tid_key, (OSADDRESS)&my_tid); - if (ethr_thr_child_func__) - ethr_thr_child_func__(init_msg->data.prep_func_res); - } - - init_msg->data.result = result; - - send(&init_msg,sender(&init_msg)); - } - - /* pthread mutex api says we have to do this */ - signal_fsem(current_process()); - ETHR_ASSERT(get_fsem(current_process()) == 0); - - res = result == 0 ? (*thr_func)(arg) : NULL; - - ethr_thr_exit(&res); -} - -/* internal exports */ - -int ethr_set_tse__(ethr_ts_event *tsep) -{ - return ethr_tsd_set(ethr_ts_event_key__,(void *) tsep); -} - -ethr_ts_event *ethr_get_tse__(void) -{ - return (ethr_ts_event *) ethr_tsd_get(ethr_ts_event_key__); -} - -#if defined(ETHR_PPC_RUNTIME_CONF__) - -static int -ppc_init__(void) -{ - int pid; - - - ethr_runtime__.conf.have_lwsync = 0; - - return 0; -} - -#endif - -#if defined(ETHR_X86_RUNTIME_CONF__) - -void -ethr_x86_cpuid__(int *eax, int *ebx, int *ecx, int *edx) -{ -#if ETHR_SIZEOF_PTR == 4 - int have_cpuid; - /* - * If it is possible to toggle eflags bit 21, - * we have the cpuid instruction. - */ - __asm__ ("pushf\n\t" - "popl %%eax\n\t" - "movl %%eax, %%ecx\n\t" - "xorl $0x200000, %%eax\n\t" - "pushl %%eax\n\t" - "popf\n\t" - "pushf\n\t" - "popl %%eax\n\t" - "movl $0x0, %0\n\t" - "xorl %%ecx, %%eax\n\t" - "jz no_cpuid\n\t" - "movl $0x1, %0\n\t" - "no_cpuid:\n\t" - : "=r"(have_cpuid) - : - : "%eax", "%ecx", "cc"); - if (!have_cpuid) { - *eax = *ebx = *ecx = *edx = 0; - return; - } -#endif -#if ETHR_SIZEOF_PTR == 4 && defined(__PIC__) && __PIC__ - /* - * When position independet code is used in 32-bit mode, the B register - * is used for storage of global offset table address, and we may not - * use it as input or output in an asm. We need to save and restore the - * B register explicitly (for some reason gcc doesn't provide this - * service to us). - */ - __asm__ ("pushl %%ebx\n\t" - "cpuid\n\t" - "movl %%ebx, %1\n\t" - "popl %%ebx\n\t" - : "=a"(*eax), "=r"(*ebx), "=c"(*ecx), "=d"(*edx) - : "0"(*eax) - : "cc"); -#else - __asm__ ("cpuid\n\t" - : "=a"(*eax), "=b"(*ebx), "=c"(*ecx), "=d"(*edx) - : "0"(*eax) - : "cc"); -#endif -} - -#endif /* ETHR_X86_RUNTIME_CONF__ */ - -/* - * -------------------------------------------------------------------------- - * Exported functions - * -------------------------------------------------------------------------- - */ - -int -ethr_init(ethr_init_data *id) -{ - int res; - - if (!ethr_not_inited__) - return EINVAL; - - -#if defined(ETHR_PPC_RUNTIME_CONF__) - res = ppc_init__(); - if (res != 0) - goto error; -#endif - - res = ethr_init_common__(id); - if (res != 0) - goto error; - - main_thr_tid.id = current_process(); - main_thr_tid.tsd_key_index = 0; - - set_envp(current_process(),own_tid_key,(OSADDRESS)&main_thr_tid); - signal_fsem(current_process()); - - - ETHR_ASSERT(&main_thr_tid == ETHR_GET_OWN_TID__); - - ethr_not_inited__ = 0; - - ethr_tsd_key_create(ðr_ts_event_key__,"ethread_tse"); - - return 0; - error: - ethr_not_inited__ = 1; - return res; - -} - -int -ethr_late_init(ethr_late_init_data *id) -{ - int res = ethr_late_init_common__(id); - if (res != 0) - return res; - ethr_not_completely_inited__ = 0; - return res; -} - -int -ethr_thr_create(ethr_tid *tid, void * (*func)(void *), void *arg, - ethr_thr_opts *opts) -{ - int res; - int use_stack_size = (opts && opts->suggested_stack_size >= 0 - ? opts->suggested_stack_size - : 0x200 /* Use system default */); - OSPRIORITY use_prio; - char *use_name; - char default_thr_name[20]; - static int no_of_thr = 0; - cpuid_t use_core; - - union SIGNAL *init_msg; - SIGSELECT sigsel[] = {1,ETHREADWRAPDATASIG}; - void *prep_func_res; - - - if (opts != NULL) { - LOG(("ERTS - ethr_thr_create(): opts supplied: name: %s, coreNo: %u.\n", - opts->name, opts->coreNo)); - use_name = opts->name; - use_core = opts->coreNo; - if (0 != ethr_get_prio(use_name, &use_prio)) { - if (0 != ethr_get_prio("DEFAULT", &use_prio)) { - use_prio = get_pri(current_process()); - LOG(("ERTS - ethr_thr_create(): Using current process' prio: %d.\n", use_prio)); - } else { - LOG(("ERTS - ethr_thr_create(): Using default prio: %d.\n", use_prio)); - } - } else { - LOG(("ERTS - ethr_thr_create(): Using configured prio: %d.\n", use_prio)); - } - } else { - LOG(("ERTS - ethr_thr_create(): opts not supplied. Using defaults.\n")); - no_of_thr++; - sprintf(default_thr_name, "ethread_%d", no_of_thr); - use_name = default_thr_name; - use_core = ose_cpu_id(); - - if (0 != ethr_get_prio("DEFAULT", &use_prio)) { - use_prio = get_pri(current_process()); - LOG(("ERTS - ethr_thr_create(): Using current process' prio: %d.\n", use_prio)); - } - } - -#ifdef ETHR_MODIFIED_DEFAULT_STACK_SIZE - if (use_stack_size < 0) - use_stack_size = ETHR_MODIFIED_DEFAULT_STACK_SIZE; -#endif - -#if ETHR_XCHK - if (ethr_not_completely_inited__) { - ETHR_ASSERT(0); - return EACCES; - } - if (!tid || !func) { - ETHR_ASSERT(0); - return EINVAL; - } -#endif - - if (use_stack_size >= 0) { - size_t suggested_stack_size = (size_t) use_stack_size; - size_t stack_size; -#ifdef ETHR_DEBUG - suggested_stack_size /= 2; /* Make sure we got margin */ -#endif -#ifdef ETHR_STACK_GUARD_SIZE - /* The guard is at least on some platforms included in the stack size - passed when creating threads */ - suggested_stack_size += ETHR_B2KW(ETHR_STACK_GUARD_SIZE); -#endif - - if (suggested_stack_size < ethr_min_stack_size__) - stack_size = ETHR_KW2B(ethr_min_stack_size__); - else if (suggested_stack_size > ethr_max_stack_size__) - stack_size = ETHR_KW2B(ethr_max_stack_size__); - else - stack_size = ETHR_PAGE_ALIGN(ETHR_KW2B(suggested_stack_size)); - use_stack_size = stack_size; - } - - init_msg = alloc(sizeof(ethr_thr_wrap_data__), ETHREADWRAPDATASIG); - - /* Call prepare func if it exist */ - if (ethr_thr_prepare_func__) - init_msg->data.prep_func_res = ethr_thr_prepare_func__(); - else - init_msg->data.prep_func_res = NULL; - - LOG(("ERTS - ethr_thr_create(): Process [0x%x] is creating '%s', coreNo = %u, prio:%u\n", - current_process(), use_name, use_core, use_prio)); - - tid->id = create_process(OS_PRI_PROC, use_name, thr_wrapper, - use_stack_size, use_prio, 0, - get_bid(current_process()), NULL, 0, 0); - if (ose_bind_process(tid->id, use_core)) { - LOG(("ERTS - ethr_thr_create(): Bound pid 0x%x (%s) to core no %u.\n", - tid->id, use_name, use_core)); - } else { - LOG(("ERTS - ethr_thr_create(): Failed binding pid 0x%x (%s) to core no %u.\n", - tid->id, use_name, use_core)); - } - - /*FIXME!!! Normally this shouldn't be used in shared mode. Still there is - * a problem with stdin fd in fd_ processes which should be further - * investigated */ - efs_clone(tid->id); - - tid->tsd_key_index = 0; - tid->res = NULL; - - init_msg->data.tse = ethr_get_ts_event(); - init_msg->data.thr_func = func; - init_msg->data.arg = arg; - init_msg->data.tid = tid; - init_msg->data.name = opts->name; - - send(&init_msg, tid->id); - - start(tid->id); - init_msg = receive(sigsel); - - res = init_msg->data.result; - prep_func_res = init_msg->data.prep_func_res; - - free_buf(&init_msg); - /* Cleanup... */ - - if (ethr_thr_parent_func__) - ethr_thr_parent_func__(prep_func_res); - - LOG(("ERTS - ethr_thr_create(): Exiting.\n")); - return res; -} - -int -ethr_thr_join(ethr_tid tid, void **res) -{ - SIGSELECT sigsel[] = {1,OS_ATTACH_SIG}; -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return EACCES; - } -#endif - - if (tid.id == ETHR_INVALID_TID_ID) - return EINVAL; - - attach(NULL,tid.id); - receive(sigsel); - - if (res) - *res = tid.res; - - return 0; -} - -int -ethr_thr_detach(ethr_tid tid) -{ -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return EACCES; - } -#endif - return 0; -} - -void -ethr_thr_exit(void *res) -{ - ethr_tid *tid; -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return; - } -#endif - tid = ETHR_GET_OWN_TID__; - if (!tid) { - ETHR_ASSERT(0); - kill_proc(current_process()); - } - thr_exit_cleanup(tid, res); - /* Harakiri possible? */ - kill_proc(current_process()); -} - -ethr_tid -ethr_self(void) -{ - ethr_tid *tid; -#if ETHR_XCHK - if (ethr_not_inited__) { - ethr_tid dummy_tid = {ETHR_INVALID_TID_ID, 0, NULL}; - ETHR_ASSERT(0); - return dummy_tid; - } -#endif - tid = ETHR_GET_OWN_TID__; - if (!tid) { - ethr_tid dummy_tid = {ETHR_INVALID_TID_ID, 0, NULL}; - return dummy_tid; - } - return *tid; -} - -int -ethr_equal_tids(ethr_tid tid1, ethr_tid tid2) -{ - return tid1.id == tid2.id && tid1.id != ETHR_INVALID_TID_ID; -} - - -/* - * Thread specific events - */ - -ethr_ts_event * -ethr_get_ts_event(void) -{ - return ethr_get_ts_event__(); -} - -void -ethr_leave_ts_event(ethr_ts_event *tsep) -{ - ethr_leave_ts_event__(tsep); -} - -/* - * Thread specific data - */ - -int -ethr_tsd_key_create(ethr_tsd_key *keyp, char *keyname) -{ - -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return EACCES; - } - if (!keyp) { - ETHR_ASSERT(0); - return EINVAL; - } -#endif - - ose_create_ppdata(keyname,keyp); - - return 0; -} - -int -ethr_tsd_key_delete(ethr_tsd_key key) -{ -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return EACCES; - } -#endif - /* Not possible to delete ppdata */ - - return 0; -} - -int -ethr_tsd_set(ethr_tsd_key key, void *value) -{ - void **ppdp; -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return EACCES; - } -#endif - ppdp = (void **)ose_get_ppdata(key); - *ppdp = value; - return 0; -} - -void * -ethr_tsd_get(ethr_tsd_key key) -{ -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return NULL; - } -#endif - return *(void**)ose_get_ppdata(key); -} - -/* - * Signal functions - */ - -#if ETHR_HAVE_ETHR_SIG_FUNCS - -int ethr_sigmask(int how, const sigset_t *set, sigset_t *oset) -{ -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return EACCES; - } - if (!set && !oset) { - ETHR_ASSERT(0); - return EINVAL; - } -#endif - return pthread_sigmask(how, set, oset); -} - -int ethr_sigwait(const sigset_t *set, int *sig) -{ -#if ETHR_XCHK - if (ethr_not_inited__) { - ETHR_ASSERT(0); - return EACCES; - } - if (!set || !sig) { - ETHR_ASSERT(0); - return EINVAL; - } -#endif - if (sigwait(set, sig) < 0) - return errno; - return 0; -} - -#endif /* #if ETHR_HAVE_ETHR_SIG_FUNCS */ - -ETHR_IMPL_NORETURN__ -ethr_abort__(void) -{ - abort(); -} diff --git a/lib/Makefile b/lib/Makefile index 34c2fe9a9e..64143a39e0 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -36,7 +36,7 @@ ALL_ERLANG_APPLICATIONS = xmerl edoc erl_docgen snmp otp_mibs erl_interface \ public_key ssl observer odbc diameter \ cosTransactions cosEvent cosTime cosNotification \ cosProperty cosFileTransfer cosEventDomain et megaco webtool \ - eunit ssh typer percept eldap dialyzer hipe ose + eunit ssh typer percept eldap dialyzer hipe ifdef BUILD_ALL ERLANG_APPLICATIONS += $(ALL_ERLANG_APPLICATIONS) diff --git a/lib/asn1/c_src/Makefile b/lib/asn1/c_src/Makefile index 2b72e1a214..e0d4f09a70 100644 --- a/lib/asn1/c_src/Makefile +++ b/lib/asn1/c_src/Makefile @@ -97,12 +97,7 @@ endif _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) opt: $(NIF_SHARED_OBJ_FILE) -else -# Do not build dynamic files on OSE -opt: -endif debug: opt @@ -140,9 +135,7 @@ include $(ERL_TOP)/make/otp_release_targets.mk release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(NIF_SHARED_OBJ_FILE) "$(RELSYSDIR)/priv/lib" -endif $(INSTALL_DIR) "$(RELSYSDIR)/c_src" $(INSTALL_DATA) *.c "$(RELSYSDIR)/c_src" diff --git a/lib/crypto/Makefile b/lib/crypto/Makefile index 24db75bf91..fbf108c410 100644 --- a/lib/crypto/Makefile +++ b/lib/crypto/Makefile @@ -24,11 +24,7 @@ include $(ERL_TOP)/make/$(TARGET)/otp.mk # Macros # -ifneq ($(findstring ose,$(TARGET)),ose) SUB_DIRECTORIES = src c_src doc/src -else -SUB_DIRECTORIES = src doc/src -endif static_lib: SUB_DIRECTORIES = c_src include vsn.mk diff --git a/lib/crypto/c_src/Makefile.in b/lib/crypto/c_src/Makefile.in index e66c0ca916..e7f750b60a 100644 --- a/lib/crypto/c_src/Makefile.in +++ b/lib/crypto/c_src/Makefile.in @@ -127,12 +127,7 @@ ALL_STATIC_CFLAGS = $(DED_STATIC_CFLAGS) $(INCLUDES) _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) debug opt valgrind: $(NIF_LIB) $(CALLBACK_LIB) -else -# Do not build dynamic files on OSE -debug opt valgrind: -endif static_lib: $(NIF_ARCHIVE) @@ -203,14 +198,12 @@ release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/obj" $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" $(INSTALL_DATA) $(NIF_MAKEFILE) "$(RELSYSDIR)/priv/obj" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(CRYPTO_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(NIF_LIB) "$(RELSYSDIR)/priv/lib" ifeq ($(DYNAMIC_CRYPTO_LIB),yes) $(INSTALL_PROGRAM) $(CALLBACK_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(CALLBACK_LIB) "$(RELSYSDIR)/priv/lib" endif -endif release_docs_spec: diff --git a/lib/crypto/c_src/crypto.c b/lib/crypto/c_src/crypto.c index 9de8dc74c2..e9cac30c9c 100644 --- a/lib/crypto/c_src/crypto.c +++ b/lib/crypto/c_src/crypto.c @@ -507,47 +507,6 @@ static void hmac_context_dtor(ErlNifEnv* env, struct hmac_context*); #define PRINTF_ERR1(FMT,A1) #define PRINTF_ERR2(FMT,A1,A2) -#ifdef __OSE__ - -/* For crypto on OSE we have to initialize the crypto library on each - process that uses it. So since we do not know which scheduler is going - to execute the nif we have to check before each nif call that we have - initialized crypto in that process. */ - -#include "ose.h" -#include "openssl/osessl.h" - -static ErlNifTSDKey crypto_init_key; -static int check_ose_crypto(void); -static int init_ose_crypto(void); - -static int check_ose_crypto() { - int key = (int)enif_tsd_get(crypto_init_key); - if (!key) { - if (!CRYPTO_OSE5_init()) { - PRINTF_ERR0("CRYPTO: Call to CRYPTO_OSE5_init failed"); - return 0; - } - enif_tsd_set(crypto_init_key,1); - } - return 1; -} - -static int init_ose_crypto() { - /* Crypto nif upgrade does not work on OSE so no need to - destroy this key */ - enif_tsd_key_create("crypto_init_key", &crypto_init_key); - return check_ose_crypto(); -} - -#define INIT_OSE_CRYPTO() init_ose_crypto() -#define CHECK_OSE_CRYPTO() check_ose_crypto() -#else -#define INIT_OSE_CRYPTO() 1 -#define CHECK_OSE_CRYPTO() -#endif - - static int verify_lib_version(void) { const unsigned long libv = SSLeay(); @@ -609,9 +568,6 @@ static int init(ErlNifEnv* env, ERL_NIF_TERM load_info) ErlNifBinary lib_bin; char lib_buf[1000]; - if (!INIT_OSE_CRYPTO()) - return 0; - if (!verify_lib_version()) return 0; @@ -853,7 +809,6 @@ static ERL_NIF_TERM md5(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -865,7 +820,6 @@ static ERL_NIF_TERM md5(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM md5_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); MD5_Init((MD5_CTX *) enif_make_new_binary(env, MD5_CTX_LEN, &ret)); return ret; } @@ -874,7 +828,6 @@ static ERL_NIF_TERM md5_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv MD5_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD5_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { @@ -891,7 +844,6 @@ static ERL_NIF_TERM md5_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; MD5_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD5_CTX_LEN) { return enif_make_badarg(env); } @@ -904,7 +856,6 @@ static ERL_NIF_TERM ripemd160(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -916,7 +867,6 @@ static ERL_NIF_TERM ripemd160(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ static ERL_NIF_TERM ripemd160_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); RIPEMD160_Init((RIPEMD160_CTX *) enif_make_new_binary(env, RIPEMD160_CTX_LEN, &ret)); return ret; } @@ -925,7 +875,6 @@ static ERL_NIF_TERM ripemd160_update(ErlNifEnv* env, int argc, const ERL_NIF_TER RIPEMD160_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != RIPEMD160_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { @@ -942,7 +891,6 @@ static ERL_NIF_TERM ripemd160_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary ctx_bin; RIPEMD160_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != RIPEMD160_CTX_LEN) { return enif_make_badarg(env); } @@ -956,7 +904,6 @@ static ERL_NIF_TERM sha(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -968,7 +915,6 @@ static ERL_NIF_TERM sha(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM sha_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA1_Init((SHA_CTX *) enif_make_new_binary(env, SHA_CTX_LEN, &ret)); return ret; } @@ -977,7 +923,6 @@ static ERL_NIF_TERM sha_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv SHA_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != SHA_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -993,7 +938,6 @@ static ERL_NIF_TERM sha_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; SHA_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != SHA_CTX_LEN) { return enif_make_badarg(env); } @@ -1007,7 +951,6 @@ static ERL_NIF_TERM sha224_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA224 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1023,7 +966,6 @@ static ERL_NIF_TERM sha224_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA224 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA224_Init((SHA256_CTX *) enif_make_new_binary(env, sizeof(SHA256_CTX), &ret)); return ret; #else @@ -1036,7 +978,6 @@ static ERL_NIF_TERM sha224_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA256_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1056,7 +997,6 @@ static ERL_NIF_TERM sha224_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA256_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX)) { return enif_make_badarg(env); } @@ -1073,7 +1013,6 @@ static ERL_NIF_TERM sha256_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA256 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1089,7 +1028,6 @@ static ERL_NIF_TERM sha256_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA256 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA256_Init((SHA256_CTX *) enif_make_new_binary(env, sizeof(SHA256_CTX), &ret)); return ret; #else @@ -1102,7 +1040,6 @@ static ERL_NIF_TERM sha256_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA256_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1122,7 +1059,6 @@ static ERL_NIF_TERM sha256_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA256_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX)) { return enif_make_badarg(env); } @@ -1139,7 +1075,6 @@ static ERL_NIF_TERM sha384_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA384 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1155,7 +1090,6 @@ static ERL_NIF_TERM sha384_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA384 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA384_Init((SHA512_CTX *) enif_make_new_binary(env, sizeof(SHA512_CTX), &ret)); return ret; #else @@ -1168,7 +1102,6 @@ static ERL_NIF_TERM sha384_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA512_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1188,7 +1121,6 @@ static ERL_NIF_TERM sha384_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA512_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX)) { return enif_make_badarg(env); } @@ -1205,7 +1137,6 @@ static ERL_NIF_TERM sha512_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA512 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1233,7 +1164,6 @@ static ERL_NIF_TERM sha512_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA512_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1253,7 +1183,6 @@ static ERL_NIF_TERM sha512_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA512_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX)) { return enif_make_badarg(env); } @@ -1270,7 +1199,6 @@ static ERL_NIF_TERM md4(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1282,7 +1210,6 @@ static ERL_NIF_TERM md4(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM md4_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); MD4_Init((MD4_CTX *) enif_make_new_binary(env, MD4_CTX_LEN, &ret)); return ret; } @@ -1291,7 +1218,6 @@ static ERL_NIF_TERM md4_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv MD4_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD4_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1307,7 +1233,6 @@ static ERL_NIF_TERM md4_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; MD4_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD4_CTX_LEN) { return enif_make_badarg(env); } @@ -1322,7 +1247,6 @@ static ERL_NIF_TERM md5_mac_n(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > MD5_LEN) { @@ -1340,7 +1264,6 @@ static ERL_NIF_TERM sha_mac_n(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA_LEN) { @@ -1360,7 +1283,6 @@ static ERL_NIF_TERM sha224_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA224_DIGEST_LENGTH) { @@ -1383,7 +1305,6 @@ static ERL_NIF_TERM sha256_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA256_DIGEST_LENGTH) { @@ -1406,7 +1327,6 @@ static ERL_NIF_TERM sha384_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA384_DIGEST_LENGTH) { @@ -1430,7 +1350,6 @@ static ERL_NIF_TERM sha512_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA512_DIGEST_LENGTH) { @@ -1462,7 +1381,6 @@ static ERL_NIF_TERM hmac_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ const EVP_MD *md; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) md = EVP_sha1(); #ifdef HAVE_SHA224 @@ -1502,7 +1420,6 @@ static ERL_NIF_TERM hmac_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg ErlNifBinary data; struct hmac_context* obj; - CHECK_OSE_CRYPTO(); if (!enif_get_resource(env, argv[0], hmac_context_rtype, (void**)&obj) || !enif_inspect_iolist_as_binary(env, argv[1], &data)) { @@ -1529,7 +1446,6 @@ static ERL_NIF_TERM hmac_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv unsigned int req_len = 0; unsigned int mac_len; - CHECK_OSE_CRYPTO(); if (!enif_get_resource(env,argv[0],hmac_context_rtype, (void**)&obj) || (argc == 2 && !enif_get_uint(env, argv[1], &req_len))) { @@ -1564,7 +1480,6 @@ static ERL_NIF_TERM des_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_binary(env, argv[1], &ivec) || ivec.size != 8 @@ -1587,7 +1502,6 @@ static ERL_NIF_TERM des_cfb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_binary(env, argv[1], &ivec) || ivec.size != 8 @@ -1607,7 +1521,6 @@ static ERL_NIF_TERM des_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a ErlNifBinary key, text; DES_key_schedule schedule; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &text) || text.size != 8) { return enif_make_badarg(env); @@ -1627,7 +1540,6 @@ static ERL_NIF_TERM des_ede3_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_T DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key1) || key1.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &key2) || key2.size != 8 @@ -1657,7 +1569,6 @@ static ERL_NIF_TERM des_ede3_cfb_crypt_nif(ErlNifEnv* env, int argc, const ERL_N DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key1) || key1.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &key2) || key2.size != 8 @@ -1714,7 +1625,6 @@ static ERL_NIF_TERM aes_cfb_128_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TE int new_ivlen = 0; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !(key.size == 16 || key.size == 24 || key.size == 32) @@ -1744,7 +1654,6 @@ static ERL_NIF_TERM aes_ctr_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned int num = 0; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1777,7 +1686,6 @@ static ERL_NIF_TERM aes_ctr_stream_encrypt(ErlNifEnv* env, int argc, const ERL_N unsigned char * ivec2_buf; unsigned char * ecount2_buf; - CHECK_OSE_CRYPTO(); if (!enif_get_tuple(env, argv[0], &state_arity, &state_term) || state_arity != 4 @@ -1816,7 +1724,6 @@ static ERL_NIF_TERM aes_gcm_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned char *outp; ERL_NIF_TERM out, out_tag; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1866,7 +1773,6 @@ static ERL_NIF_TERM aes_gcm_decrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned char *outp; ERL_NIF_TERM out; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1937,7 +1843,6 @@ static ERL_NIF_TERM chacha20_poly1305_encrypt(ErlNifEnv* env, int argc, const ER unsigned char poly1305_key[32]; poly1305_state poly1305; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 32 || !enif_inspect_binary(env, argv[1], &iv) || iv.size != CHACHA20_NONCE_LEN @@ -1991,7 +1896,6 @@ static ERL_NIF_TERM chacha20_poly1305_decrypt(ErlNifEnv* env, int argc, const ER unsigned char mac[POLY1305_TAG_LEN]; poly1305_state poly1305; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 32 || !enif_inspect_binary(env, argv[1], &iv) || iv.size != CHACHA20_NONCE_LEN @@ -2045,7 +1949,6 @@ static ERL_NIF_TERM aes_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2074,7 +1977,6 @@ static ERL_NIF_TERM rand_bytes_1(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned bytes; unsigned char* data; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes)) { return enif_make_badarg(env); } @@ -2088,7 +1990,6 @@ static ERL_NIF_TERM strong_rand_bytes_nif(ErlNifEnv* env, int argc, const ERL_NI unsigned bytes; unsigned char* data; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes)) { return enif_make_badarg(env); } @@ -2106,7 +2007,6 @@ static ERL_NIF_TERM rand_bytes_3(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned char* data; unsigned top_mask, bot_mask; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes) || !enif_get_uint(env, argv[1], &top_mask) || !enif_get_uint(env, argv[2], &bot_mask)) { @@ -2130,7 +2030,6 @@ static ERL_NIF_TERM strong_rand_mpint_nif(ErlNifEnv* env, int argc, const ERL_NI unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bits) || !enif_get_int(env, argv[1], &top) @@ -2200,7 +2099,6 @@ static ERL_NIF_TERM rand_uniform_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_mpint(env, argv[0], &bn_from) || !get_bn_from_mpint(env, argv[1], &bn_rand)) { @@ -2233,7 +2131,6 @@ static ERL_NIF_TERM mod_exp_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg unsigned extra_byte; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_base) || !get_bn_from_bin(env, argv[1], &bn_exponent) @@ -2277,7 +2174,6 @@ static ERL_NIF_TERM dss_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM DSA *dsa; int i; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) { if (enif_get_tuple(env, argv[1], &tpl_arity, &tpl_terms)) { @@ -2446,7 +2342,6 @@ static ERL_NIF_TERM rsa_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM struct digest_type_t* digp = NULL; unsigned char* digest = NULL; - CHECK_OSE_CRYPTO(); digp = get_digest_type(type); if (!digp) { @@ -2508,7 +2403,6 @@ static ERL_NIF_TERM aes_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2569,7 +2463,6 @@ static ERL_NIF_TERM aes_ige_crypt_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2607,7 +2500,6 @@ static ERL_NIF_TERM do_exor(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) int i; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &d1) || !enif_inspect_iolist_as_binary(env,argv[1], &d2) @@ -2629,7 +2521,6 @@ static ERL_NIF_TERM rc4_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg RC4_KEY rc4_key; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &key) || !enif_inspect_iolist_as_binary(env,argv[1], &data)) { @@ -2647,7 +2538,6 @@ static ERL_NIF_TERM rc4_set_key(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg ErlNifBinary key; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &key)) { return enif_make_badarg(env); @@ -2664,7 +2554,6 @@ static ERL_NIF_TERM rc4_encrypt_with_state(ErlNifEnv* env, int argc, const ERL_N RC4_KEY* rc4_key; ERL_NIF_TERM new_state, new_data; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &state) || state.size != sizeof(RC4_KEY) @@ -2686,7 +2575,6 @@ static ERL_NIF_TERM rc2_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a ERL_NIF_TERM ret; unsigned char iv_copy[8]; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 5 && key_bin.size != 8 && key_bin.size != 16) @@ -2748,7 +2636,6 @@ static ERL_NIF_TERM rsa_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar struct digest_type_t *digp; unsigned char* digest; - CHECK_OSE_CRYPTO(); digp = get_digest_type(argv[0]); if (!digp) { @@ -2816,7 +2703,6 @@ static ERL_NIF_TERM dss_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar DSA* dsa; int i; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) { if (enif_get_tuple(env, argv[1], &tpl_arity, &tpl_terms)) { @@ -2903,7 +2789,6 @@ static ERL_NIF_TERM rsa_public_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TER int padding, i; RSA* rsa; - CHECK_OSE_CRYPTO(); rsa = RSA_new(); @@ -2953,7 +2838,6 @@ static ERL_NIF_TERM rsa_private_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TE int padding, i; RSA* rsa; - CHECK_OSE_CRYPTO(); rsa = RSA_new(); @@ -3001,7 +2885,6 @@ static ERL_NIF_TERM dh_generate_parameters_nif(ErlNifEnv* env, int argc, const E unsigned char *p_ptr, *g_ptr; ERL_NIF_TERM ret_p, ret_g; - CHECK_OSE_CRYPTO(); if (!enif_get_int(env, argv[0], &prime_len) || !enif_get_int(env, argv[1], &generator)) { @@ -3030,7 +2913,6 @@ static ERL_NIF_TERM dh_check(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[] int i; ERL_NIF_TERM ret, head, tail; - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3066,7 +2948,6 @@ static ERL_NIF_TERM dh_generate_key_nif(ErlNifEnv* env, int argc, const ERL_NIF_ ERL_NIF_TERM ret, ret_pub, ret_prv, head, tail; int mpint; /* 0 or 4 */ - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3112,7 +2993,6 @@ static ERL_NIF_TERM dh_compute_key_nif(ErlNifEnv* env, int argc, const ERL_NIF_T ErlNifBinary ret_bin; ERL_NIF_TERM ret, head, tail; - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3154,7 +3034,6 @@ static ERL_NIF_TERM srp_value_B_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_multiplier) || !get_bn_from_bin(env, argv[1], &bn_verifier) @@ -3216,7 +3095,6 @@ static ERL_NIF_TERM srp_user_secret_nif(ErlNifEnv* env, int argc, const ERL_NIF_ unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_a) || !get_bn_from_bin(env, argv[1], &bn_u) @@ -3297,7 +3175,6 @@ static ERL_NIF_TERM srp_host_secret_nif(ErlNifEnv* env, int argc, const ERL_NIF_ unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_verifier) || !get_bn_from_bin(env, argv[1], &bn_b) @@ -3359,7 +3236,6 @@ static ERL_NIF_TERM bf_cfb64_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM int bf_n = 0; /* blowfish ivec pos */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3384,7 +3260,6 @@ static ERL_NIF_TERM bf_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned char bf_tkey[8]; /* blowfish ivec */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3409,7 +3284,6 @@ static ERL_NIF_TERM bf_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar BF_KEY bf_key; /* blowfish key 8 */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin) @@ -3431,7 +3305,6 @@ static ERL_NIF_TERM blowfish_ofb64_encrypt(ErlNifEnv* env, int argc, const ERL_N int bf_n = 0; /* blowfish ivec pos */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3756,7 +3629,6 @@ static ERL_NIF_TERM ec_key_generate(ErlNifEnv* env, int argc, const ERL_NIF_TERM ERL_NIF_TERM priv_key; ERL_NIF_TERM pub_key = atom_undefined; - CHECK_OSE_CRYPTO(); if (!get_ec_key(env, argv[0], argv[1], atom_undefined, &key)) goto badarg; @@ -3799,7 +3671,6 @@ static ERL_NIF_TERM ecdsa_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM struct digest_type_t *digp; unsigned char* digest; - CHECK_OSE_CRYPTO(); digp = get_digest_type(argv[0]); if (!digp) { @@ -3868,7 +3739,6 @@ static ERL_NIF_TERM ecdsa_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER struct digest_type_t* digp = NULL; unsigned char* digest = NULL; - CHECK_OSE_CRYPTO(); digp = get_digest_type(type); if (!digp) { @@ -3933,7 +3803,6 @@ static ERL_NIF_TERM ecdh_compute_key_nif(ErlNifEnv* env, int argc, const ERL_NIF EC_POINT *my_ecpoint; EC_KEY *other_ecdh = NULL; - CHECK_OSE_CRYPTO(); if (!get_ec_key(env, argv[1], argv[2], atom_undefined, &key)) return enif_make_badarg(env); @@ -3978,7 +3847,6 @@ out_err: static ERL_NIF_TERM rand_seed_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) { ErlNifBinary seed_bin; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &seed_bin)) return enif_make_badarg(env); RAND_seed(seed_bin.data,seed_bin.size); diff --git a/lib/crypto/test/crypto_SUITE.erl b/lib/crypto/test/crypto_SUITE.erl index e84f5e1075..0b955c0965 100644 --- a/lib/crypto/test/crypto_SUITE.erl +++ b/lib/crypto/test/crypto_SUITE.erl @@ -118,10 +118,10 @@ init_per_suite(Config) -> _ -> Config catch error:low_entropy -> - %% Make sure we are on OSE, otherwise we want to crash - {ose,_} = os:type(), + %% We are testing on an OS with low entropy in its random + %% seed. So we have to seed it with a binary to get started. - %% This is NOT how you want to seed this, it is just here + %% This is NOT how you want to do seeding, it is just here %% to make the tests pass. Check your OS manual for how you %% really want to seed. {H,M,L} = erlang:now(), diff --git a/lib/hipe/cerl/erl_bif_types.erl b/lib/hipe/cerl/erl_bif_types.erl index 41a6c731c9..0b033ca439 100644 --- a/lib/hipe/cerl/erl_bif_types.erl +++ b/lib/hipe/cerl/erl_bif_types.erl @@ -913,8 +913,7 @@ type(erlang, system_info, 1, Xs, Opaques) -> t_list(t_pid()); ['os_type'] -> t_tuple([t_sup([t_atom('unix'), - t_atom('win32'), - t_atom('ose')]), + t_atom('win32')]), t_atom()]); ['os_version'] -> t_sup(t_tuple([t_non_neg_fixnum(), diff --git a/lib/kernel/doc/src/notes.xml b/lib/kernel/doc/src/notes.xml index b8db22aba7..e759f214df 100644 --- a/lib/kernel/doc/src/notes.xml +++ b/lib/kernel/doc/src/notes.xml @@ -423,8 +423,7 @@ Erlang/OTP has been ported to the realtime operating system OSE. The port supports both smp and non-smp emulator. For details around the port and how to started - see the User's Guide in the <seealso - marker="ose:ose_intro">ose</seealso> application. </p> + see the User's Guide in the ose application. </p> <p> Note that not all parts of Erlang/OTP has been ported. </p> <p> diff --git a/lib/kernel/doc/src/ref_man.xml.src b/lib/kernel/doc/src/ref_man.xml.src deleted file mode 100644 index 7eb48a5f1d..0000000000 --- a/lib/kernel/doc/src/ref_man.xml.src +++ /dev/null @@ -1,68 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE application SYSTEM "application.dtd"> - -<application xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>1996</year><year>2013</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Kernel Reference Manual</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - </header> - <description> - <p>The <em>Kernel</em> application has all the code necessary to run - the Erlang runtime system itself: file servers and code servers - and so on.</p> - </description> - <xi:include href="kernel_app.xml"/> - <xi:include href="application.xml"/> - <xi:include href="auth.xml"/> - <xi:include href="code.xml"/> - <xi:include href="disk_log.xml"/> - <xi:include href="erl_boot_server.xml"/> - <xi:include href="erl_ddll.xml"/> - <xi:include href="erl_prim_loader_stub.xml"/> - <xi:include href="erlang_stub.xml"/> - <xi:include href="error_handler.xml"/> - <xi:include href="error_logger.xml"/> - <xi:include href="file.xml"/> - <xi:include href="gen_tcp.xml"/> - <xi:include href="gen_udp.xml"/> - <xi:include href="gen_sctp.xml"/> - <xi:include href="global.xml"/> - <xi:include href="global_group.xml"/> - <xi:include href="heart.xml"/> - <xi:include href="inet.xml"/> - <xi:include href="inet_res.xml"/> - <xi:include href="init_stub.xml"/> - <xi:include href="net_adm.xml"/> - <xi:include href="net_kernel.xml"/> - <xi:include href="os.xml"/> - <xi:include href="pg2.xml"/> - <xi:include href="rpc.xml"/> - <xi:include href="seq_trace.xml"/> - <xi:include href="user.xml"/> - <xi:include href="wrap_log_reader.xml"/> - <xi:include href="zlib_stub.xml"/> - <xi:include href="app.xml"/> - <xi:include href="config.xml"/> -</application> diff --git a/lib/kernel/src/inet_config.erl b/lib/kernel/src/inet_config.erl index 803fae846e..a0d5344f11 100644 --- a/lib/kernel/src/inet_config.erl +++ b/lib/kernel/src/inet_config.erl @@ -188,9 +188,6 @@ do_load_resolv({win32,Type}, longnames) -> win32_load_from_registry(Type), inet_db:set_lookup([native]); -do_load_resolv({ose,_}, _) -> - inet_db:set_lookup([file]); - do_load_resolv(_, _) -> inet_db:set_lookup([native]). diff --git a/lib/kernel/src/os.erl b/lib/kernel/src/os.erl index 3330b38d84..ffb899e5ca 100644 --- a/lib/kernel/src/os.erl +++ b/lib/kernel/src/os.erl @@ -93,7 +93,7 @@ unsetenv(_) -> %%% End of BIFs -spec type() -> {Osfamily, Osname} when - Osfamily :: unix | win32 | ose, + Osfamily :: unix | win32, Osname :: atom(). type() -> diff --git a/lib/kernel/test/erl_prim_loader_SUITE.erl b/lib/kernel/test/erl_prim_loader_SUITE.erl index 0803cf428f..ffcde5e458 100644 --- a/lib/kernel/test/erl_prim_loader_SUITE.erl +++ b/lib/kernel/test/erl_prim_loader_SUITE.erl @@ -260,46 +260,41 @@ multiple_slaves(doc) -> ["Start nodes in parallell, all using the 'inet' loading method, ", "verify that the boot server manages"]; multiple_slaves(Config) when is_list(Config) -> - case os:type() of - {ose,_} -> - {comment, "OSE: multiple nodes not supported"}; - _ -> - ?line Name = erl_prim_test_multiple_slaves, - ?line Host = host(), - ?line Cookie = atom_to_list(erlang:get_cookie()), - ?line IpStr = ip_str(Host), - ?line LFlag = get_loader_flag(os:type()), - ?line Args = LFlag ++ " -hosts " ++ IpStr ++ - " -setcookie " ++ Cookie, - - NoOfNodes = 10, % no of slave nodes to be started - - NamesAndNodes = - lists:map(fun(N) -> - NameN = atom_to_list(Name) ++ - integer_to_list(N), - NodeN = NameN ++ "@" ++ Host, - {list_to_atom(NameN),list_to_atom(NodeN)} - end, lists:seq(1, NoOfNodes)), - - ?line Nodes = start_multiple_nodes(NamesAndNodes, Args, []), - - %% "queue up" the nodes to wait for the boot server to respond - %% (note: test_server supervises each node start by accept() - %% on a socket, the timeout value for the accept has to be quite - %% long for this test to work). - ?line test_server:sleep(test_server:seconds(5)), - %% start the code loading circus! - ?line {ok,BootPid} = erl_boot_server:start_link([Host]), - %% give the nodes a chance to boot up before attempting to stop them - ?line test_server:sleep(test_server:seconds(10)), + ?line Name = erl_prim_test_multiple_slaves, + ?line Host = host(), + ?line Cookie = atom_to_list(erlang:get_cookie()), + ?line IpStr = ip_str(Host), + ?line LFlag = get_loader_flag(os:type()), + ?line Args = LFlag ++ " -hosts " ++ IpStr ++ + " -setcookie " ++ Cookie, + + NoOfNodes = 10, % no of slave nodes to be started + + NamesAndNodes = + lists:map(fun(N) -> + NameN = atom_to_list(Name) ++ + integer_to_list(N), + NodeN = NameN ++ "@" ++ Host, + {list_to_atom(NameN),list_to_atom(NodeN)} + end, lists:seq(1, NoOfNodes)), + + ?line Nodes = start_multiple_nodes(NamesAndNodes, Args, []), + + %% "queue up" the nodes to wait for the boot server to respond + %% (note: test_server supervises each node start by accept() + %% on a socket, the timeout value for the accept has to be quite + %% long for this test to work). + ?line test_server:sleep(test_server:seconds(5)), + %% start the code loading circus! + ?line {ok,BootPid} = erl_boot_server:start_link([Host]), + %% give the nodes a chance to boot up before attempting to stop them + ?line test_server:sleep(test_server:seconds(10)), - ?line wait_and_shutdown(lists:reverse(Nodes), 30), + ?line wait_and_shutdown(lists:reverse(Nodes), 30), - ?line unlink(BootPid), - ?line exit(BootPid, kill), - ok - end. + ?line unlink(BootPid), + ?line exit(BootPid, kill), + ok. start_multiple_nodes([{Name,Node} | NNs], Args, Started) -> ?line {ok,Node} = start_node(Name, Args, [{wait, false}]), diff --git a/lib/kernel/test/file_SUITE.erl b/lib/kernel/test/file_SUITE.erl index 8856be31c2..5263130574 100644 --- a/lib/kernel/test/file_SUITE.erl +++ b/lib/kernel/test/file_SUITE.erl @@ -167,12 +167,7 @@ init_per_suite(Config) when is_list(Config) -> ok -> [{sasl,started}] end, - ok = case os:type() of - {ose,_} -> - ok; - _ -> - application:start(os_mon) - end, + application:start(os_mon), case os:type() of {win32, _} -> @@ -198,12 +193,7 @@ end_per_suite(Config) when is_list(Config) -> ok end, - case os:type() of - {ose,_} -> - ok; - _ -> - application:stop(os_mon) - end, + application:stop(os_mon), case proplists:get_value(sasl, Config) of started -> application:stop(sasl); @@ -888,10 +878,7 @@ open1(Config) when is_list(Config) -> ?line io:format(Fd1,Str,[]), ?line {ok,0} = ?FILE_MODULE:position(Fd1,bof), ?line Str = io:get_line(Fd1,''), - ?line case io:get_line(Fd2,'') of - Str -> Str; - eof -> Str - end, + ?line Str = io:get_line(Fd2,''), ?line ok = ?FILE_MODULE:close(Fd2), ?line {ok,0} = ?FILE_MODULE:position(Fd1,bof), ?line ok = ?FILE_MODULE:truncate(Fd1), @@ -2346,9 +2333,6 @@ e_rename(Config) when is_list(Config) -> %% At least Windows NT can %% successfully move a file to %% another drive. - ok; - {ose, _} -> - %% disabled for now ok end, [] = flush(), diff --git a/lib/kernel/test/gen_tcp_misc_SUITE.erl b/lib/kernel/test/gen_tcp_misc_SUITE.erl index 81c6dcd0fd..3adca83ec9 100644 --- a/lib/kernel/test/gen_tcp_misc_SUITE.erl +++ b/lib/kernel/test/gen_tcp_misc_SUITE.erl @@ -58,14 +58,6 @@ oct_acceptor/1, otp_7731_server/1, zombie_server/2, do_iter_max_socks/2]). -init_per_testcase(wrapping_oct, Config) when is_list(Config) -> - Dog = case os:type() of - {ose,_} -> - test_server:timetrap(test_server:minutes(20)); - _Else -> - test_server:timetrap(test_server:seconds(600)) - end, - [{watchdog, Dog}|Config]; init_per_testcase(iter_max_socks, Config) when is_list(Config) -> Dog = case os:type() of {win32,_} -> @@ -74,14 +66,6 @@ init_per_testcase(iter_max_socks, Config) when is_list(Config) -> test_server:timetrap(test_server:seconds(240)) end, [{watchdog, Dog}|Config]; -init_per_testcase(accept_system_limit, Config) when is_list(Config) -> - case os:type() of - {ose,_} -> - {skip,"Skip in OSE"}; - _ -> - Dog = test_server:timetrap(test_server:seconds(240)), - [{watchdog,Dog}|Config] - end; init_per_testcase(wrapping_oct, Config) when is_list(Config) -> Dog = test_server:timetrap(test_server:seconds(600)), [{watchdog, Dog}|Config]; diff --git a/lib/kernel/test/prim_file_SUITE.erl b/lib/kernel/test/prim_file_SUITE.erl index 3e6d8492f7..366231d2cc 100644 --- a/lib/kernel/test/prim_file_SUITE.erl +++ b/lib/kernel/test/prim_file_SUITE.erl @@ -455,10 +455,7 @@ open1(Config) when is_list(Config) -> ?line ?PRIM_FILE:write(Fd1,Str), ?line {ok,0} = ?PRIM_FILE:position(Fd1,bof), ?line {ok, Str} = ?PRIM_FILE:read(Fd1,Length), - ?line case ?PRIM_FILE:read(Fd2,Length) of - {ok,Str} -> Str; - eof -> Str - end, + ?line {ok, Str} = ?PRIM_FILE:read(Fd2,Length), ?line ok = ?PRIM_FILE:close(Fd2), ?line {ok,0} = ?PRIM_FILE:position(Fd1,bof), ?line ok = ?PRIM_FILE:truncate(Fd1), @@ -1629,7 +1626,7 @@ e_rename(Config) when is_list(Config) -> %% successfully move a file to %% another drive. ok; - {unix, _ } -> + _ -> OtherFs = "/tmp", ?line NameOnOtherFs = filename:join(OtherFs, @@ -1653,10 +1650,7 @@ e_rename(Config) when is_list(Config) -> Else -> Else end, - Com; - {ose, _} -> - %% disabled for now - ok + Com end, ?line test_server:timetrap_cancel(Dog), Comment. diff --git a/lib/ose/Makefile b/lib/ose/Makefile deleted file mode 100644 index 6119b75c3f..0000000000 --- a/lib/ose/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1996-2009. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# -# Macros -# - -SUB_DIRECTORIES = src doc/src - -include vsn.mk -VSN = $(OSE_VSN) - -SPECIAL_TARGETS = - -# -# Default Subdir Targets -# -include $(ERL_TOP)/make/otp_subdir.mk diff --git a/lib/ose/doc/html/.gitignore b/lib/ose/doc/html/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/html/.gitignore +++ /dev/null diff --git a/lib/ose/doc/man3/.gitignore b/lib/ose/doc/man3/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/man3/.gitignore +++ /dev/null diff --git a/lib/ose/doc/man6/.gitignore b/lib/ose/doc/man6/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/man6/.gitignore +++ /dev/null diff --git a/lib/ose/doc/pdf/.gitignore b/lib/ose/doc/pdf/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/pdf/.gitignore +++ /dev/null diff --git a/lib/ose/doc/src/.gitignore b/lib/ose/doc/src/.gitignore deleted file mode 100644 index 860e9e703e..0000000000 --- a/lib/ose/doc/src/.gitignore +++ /dev/null @@ -1 +0,0 @@ -ose.xml diff --git a/lib/ose/doc/src/Makefile b/lib/ose/doc/src/Makefile deleted file mode 100644 index 7ebd4125ba..0000000000 --- a/lib/ose/doc/src/Makefile +++ /dev/null @@ -1,133 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1997-2012. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Application version -# ---------------------------------------------------- -include ../../vsn.mk -VSN=$(OSE_VSN) -APPLICATION=ose - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN) - -# ---------------------------------------------------- -# Help application directory specification -# ---------------------------------------------------- -EDOC_DIR = $(ERL_TOP)/lib/edoc -SYNTAX_TOOLS_DIR = $(ERL_TOP)/lib/syntax_tools - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- -XML_APPLICATION_FILES = ref_man.xml - -XML_REF3_FILES = \ - ose.xml \ - ose_erl_driver.xml - -XML_REF6_FILES = ose_app.xml - -XML_PART_FILES = part.xml -XML_CHAPTER_FILES = notes.xml ose_intro.xml ose_signals_chapter.xml - -BOOK_FILES = book.xml - -XML_FILES = \ - $(BOOK_FILES) $(XML_CHAPTER_FILES) \ - $(XML_PART_FILES) $(XML_REF3_FILES) $(XML_REF6_FILES) \ - $(XML_APPLICATION_FILES) - -# ---------------------------------------------------- - -HTML_FILES = $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.html) \ - $(XML_PART_FILES:%.xml=$(HTMLDIR)/%.html) - -INFO_FILE = ../../info - -MAN3_FILES = $(XML_REF3_FILES:%.xml=$(MAN3DIR)/%.3) -MAN6_FILES = $(XML_REF6_FILES:%_app.xml=$(MAN6DIR)/%.6) - -HTML_REF_MAN_FILE = $(HTMLDIR)/index.html - -TOP_PDF_FILE = $(PDFDIR)/$(APPLICATION)-$(VSN).pdf - -SPECS_FILES = - -TOP_SPECS_FILE = - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- -XML_FLAGS += - -SPECS_FLAGS = -I../../include -I../../../kernel/include - -OSE_SRC_DIR = ../../src - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- -docs: man pdf html - -$(TOP_PDF_FILE): $(XML_FILES) - -pdf: $(TOP_PDF_FILE) - -html: $(HTML_REF_MAN_FILE) - -man: $(MAN3_FILES) $(MAN6_FILES) - -ose.xml: $(OSE_SRC_DIR)/ose.erl - escript $(DOCGEN)/priv/bin/xml_from_edoc.escript\ - $(OSE_SRC_DIR)/$(@:%.xml=%.erl) - -debug opt: - -clean clean_docs: - rm -rf $(HTMLDIR)/* - rm -f $(MAN3DIR)/* - rm -f $(MAN6DIR)/* - rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) - rm -f $(SPECDIR)/* - rm -f errs core *~ - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_docs_spec: docs - $(INSTALL_DIR) "$(RELSYSDIR)/doc/pdf" - $(INSTALL_DATA) $(TOP_PDF_FILE) "$(RELSYSDIR)/doc/pdf" - $(INSTALL_DIR) "$(RELSYSDIR)/doc/html" - $(INSTALL_DATA) $(HTMLDIR)/* \ - "$(RELSYSDIR)/doc/html" - $(INSTALL_DATA) $(INFO_FILE) "$(RELSYSDIR)" - $(INSTALL_DIR) "$(RELEASE_PATH)/man/man3" - $(INSTALL_DATA) $(MAN3DIR)/* "$(RELEASE_PATH)/man/man3" - $(INSTALL_DIR) "$(RELEASE_PATH)/man/man6" - $(INSTALL_DATA) $(MAN6_FILES) "$(RELEASE_PATH)/man/man6" - -release_spec: diff --git a/lib/ose/doc/src/book.xml b/lib/ose/doc/src/book.xml deleted file mode 100644 index d62e0d32f4..0000000000 --- a/lib/ose/doc/src/book.xml +++ /dev/null @@ -1,49 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE book SYSTEM "book.dtd"> - -<book xmlns:xi="http://www.w3.org/2001/XInclude"> - <header titlestyle="normal"> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>book.xml</file> - </header> - <insidecover> - </insidecover> - <pagetext>OSE</pagetext> - <preamble> - <contents level="2"></contents> - </preamble> - <parts> - <xi:include href="part.xml"/> - </parts> - <applications> - <xi:include href="ref_man.xml"/> - </applications> - <releasenotes> - <xi:include href="notes.xml"/> - </releasenotes> - <listofterms></listofterms> - <index></index> -</book> diff --git a/lib/ose/doc/src/notes.xml b/lib/ose/doc/src/notes.xml deleted file mode 100644 index 06881b6c99..0000000000 --- a/lib/ose/doc/src/notes.xml +++ /dev/null @@ -1,109 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE Release Notes</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - <file>notes.xml</file> - </header> - <p>This document describes the changes made to the OSE application.</p> - -<section><title>Ose 1.1</title> - - <section><title>Improvements and New Features</title> - <list> - <item> - <p> - Change license text from Erlang Public License to Apache - Public License v2</p> - <p> - Own Id: OTP-12845</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0.2</title> - - <section><title>Fixed Bugs and Malfunctions</title> - <list> - <item> - <p> - Add missing release notes for the OSE application.</p> - <p> - Own Id: OTP-12177</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0.1</title> - - <section><title>Fixed Bugs and Malfunctions</title> - <list> - <item> - <p> - Fix some spelling mistakes in documentation</p> - <p> - Own Id: OTP-12152</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0</title> - - <section><title>Improvements and New Features</title> - <list> - <item> - <p> - Erlang/OTP has been ported to the realtime operating - system OSE. The port supports both smp and non-smp - emulator. For details around the port and how to started - see the User's Guide in the <seealso - marker="ose:ose_intro">ose</seealso> application. </p> - <p> - Note that not all parts of Erlang/OTP has been ported. </p> - <p> - Notable things that work are: non-smp and smp emulators, - OSE signal interaction, crypto, asn1, run_erl/to_erl, - tcp, epmd, distribution and most if not all non-os - specific functionality of Erlang.</p> - <p> - Notable things that does not work are: udp/sctp, os_mon, - erl_interface, binding of schedulers.</p> - <p> - Own Id: OTP-11334</p> - </item> - </list> - </section> - -</section> - -</chapter> diff --git a/lib/ose/doc/src/ose_app.xml b/lib/ose/doc/src/ose_app.xml deleted file mode 100644 index d555f0ec4f..0000000000 --- a/lib/ose/doc/src/ose_app.xml +++ /dev/null @@ -1,38 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE appref SYSTEM "appref.dtd"> - -<appref> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Enea OSE</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - </header> - <app>ose</app> - <appsummary>The OSE Application</appsummary> - <description> - <p>The OSE application contains modules and documentation that only - applies when running Erlang/OTP on Enea OSE.</p> - </description> - -</appref> diff --git a/lib/ose/doc/src/ose_erl_driver.xml b/lib/ose/doc/src/ose_erl_driver.xml deleted file mode 100644 index b804c29d2d..0000000000 --- a/lib/ose/doc/src/ose_erl_driver.xml +++ /dev/null @@ -1,111 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE cref SYSTEM "cref.dtd"> - -<cref> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>erl_driver for Enea OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_erl_driver.xml</file> - </header> - <lib>ose_erl_driver</lib> - <libsummary>Linked-in drivers in Enea OSE</libsummary> - <description> - <p>Writing Linked-in drivers that also work on Enea OSE is very similar for - how you would do it for Unix. The difference from Unix is that - driver_select, ready_input and ready_output all work with signals - instead of file descriptors. This means that the driver_select is - used to specify which type of signal should trigger calls to - ready_input/ready_output. The functions described below are available - to driver programmers on Enea OSE to facilitate this. - </p> - </description> - <section> - <title>DATA TYPES</title> - - <taglist> - <tag><marker id="union_SIGNAL"/>union SIGNAL</tag> - <item>See the Enea OSE SPI documentation for a description.</item> - <tag><marker id="SIGSELECT"/>SIGSELECT</tag> - <item>See the Enea OSE SPI documentation for a description.</item> - <tag><marker id="ErlDrvEvent"/>ErlDrvEvent</tag> - <item>The <c>ErlDrvEvent</c> is a handle to a signal number and id combination. It is passed to <seealso marker="erts:erl_driver#driver_select">driver_select(3)</seealso>.</item> - <tag><marker id="ErlDrvOseEventId"/>ErlDrvOseEventId</tag> - <item>This is the id used to associate a specific signal to a - certain driver instance. </item> - </taglist> - </section> - <funcs> - <func> - <name><ret>union SIGNAL *</ret><nametext>erl_drv_ose_get_signal(ErlDrvEvent drv_event)</nametext></name> - <desc> - <marker id="erl_drv_ose_get_signal"></marker> - <p>Fetch the next signal associated with <c>drv_event</c>. - Signals will be returned in the order which they were received and - when no more signals are available <c>NULL</c> will be returned. - Use this function in the ready_input/ready_output callbacks - to get signals.</p> - </desc> - </func> - <func> - <name><ret>ErlDrvEvent</ret><nametext>erl_drv_ose_event_alloc(SIGSELECT signo, ErlDrvOseEventId id, ErlDrvOseEventId (*resolve_signal)(union SIGNAL* sig), void *extra)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_alloc"></marker> - <p>Create a new <c>ErlDrvEvent</c> associated with <c>signo</c>, - <c>id</c> and uses the <c>resolve_signal</c> function to extract - the <c>id</c> from a signal with <c>signo</c>. The <c>extra</c> - parameter can be used for additional data. See - <seealso marker="ose_signals_chapter#driver"> - Signals in a Linked-in driver</seealso> in the OSE User's Guide. - </p> - </desc> - </func> - <func> - <name><ret>void</ret><nametext>erl_drv_ose_event_free(ErlDrvEvent drv_event)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_free"></marker> - <p>Free a <c>ErlDrvEvent</c>. This should always be done in the - <seealso marker="erts:driver_entry#stop_select">stop_select</seealso> - callback when the event is no longer being used.</p> - </desc> - </func> - <func> - <name><ret>void</ret><nametext>erl_drv_ose_event_fetch(ErlDrvEvent drv_event, SIGSELECT *signo, ErlDrvOseEventId *id, void **extra)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_fetch"></marker> - <p>Write the signal number, id and any extra data associated with <c>drv_event</c> - into <c>*signo</c> and <c>*id</c> respectively. <c>NULL</c> can be - also passed as <c>signo</c> or <c>id</c> in order to ignore that field. - </p> - </desc> - </func> - </funcs> - <section> - <title>SEE ALSO</title> - <p> - <seealso marker="erts:driver_entry">driver_entry(3)</seealso>, - <seealso marker="erts:erl_driver">erl_driver(3)</seealso> - </p> - </section> -</cref> diff --git a/lib/ose/doc/src/ose_intro.xml b/lib/ose/doc/src/ose_intro.xml deleted file mode 100644 index 982516c8bd..0000000000 --- a/lib/ose/doc/src/ose_intro.xml +++ /dev/null @@ -1,154 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Introduction</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_intro.xml</file> - </header> - - <section> - <title>Features</title> - </section> - - <section> - <title>Starting Erlang/OTP</title> - <p> - Starting Erlang/OTP on OSE is not as simple as on Unix/Windows (yet). - First of all you have to explicitly use the beam (or beam.smp) executables - found in erts-X.Y.Z/bin as the load module that you run. This in turn - means that you have to supply the raw beam arguments to the emulator - when starting. Fortunately <c>erl</c> on Unix/Windows has a - undocumented flag called <c>-emu_args_exit</c> that can be used to - figure out what the arguments to beam look like. For example:</p> - <code># erl +Mut false +A 10 +S 4:4 +Muycs256 +P 2096 +Q 2096 -emu_args_exit --Mut -false --A -10 --S -4:4 --Muycs256 --P -2096 --Q -2096 --- --root -/usr/local/lib/erlang --progname -erl --- --home -/home/erlang ---</code> - <p> - The arguments are printed on separate lines to make it possible to know - what has to be quoted with ". Each line is one quotable unit. - So taking the arguments above you can supply them to pm_create or - just execute directly on the command line. For example:</p> - <code>rtose@acp3400> pm_install erlang /mst/erlang/erts-6.0/bin/beam.smp -rtose@acp3400> pm_create -c ARGV="-Mut false -A 10 -S 4:4 -Muycs256 -P 2096 -Q 2099 -- -root /mst/erlang -progname erl -- -home /mst/erlang --" erlang -pid: 0x110059 -rtose@acp3400> pm_start 0x110059</code> - <p> - Also note that since we are running erl to figure out the arguments on a - separate machine the paths have to be updated. In the example above - <c>/usr/local/lib/erlang</c> was replaced by <c>/mst/erlang/</c>. The - goal is to in future releases not have to do the special argument handling - but for now (OTP 17.0) you have to do it. - </p> - <note> - Because of a limitation in the way the OSE handles stdio when starting - load modules using pm_install/create the Erlang shell only reads every - other command from stdin. However if you start Erlang using run_erl - you do not have this problem. So it is highly recommended that you - start Erlang using run_erl. - </note> - </section> - - <section> - <title>run_erl and to_erl</title> - <p> - In OSE run_erl and to_erl are combined into a single load module called - run_erl_lm. Installing and starting the load module will add two new - shell commands called run_erl and to_erl. They work in exactly the same - way as the unix variants of run_erl and to_erl, except that the read - and write pipes have to be placed under the /pipe vm. One additional - option also exists to run_erl on ose: - <taglist> - <tag><c>-block Name</c></tag> - <item>The name of the install handle and block that will be created/used by - installing and exectuting the first part of the command. If nothing - if given the basename of the load module will be used for this value. - Example: - <code>pm_install erlang /path/to/erlang/vm/beam.smp -run_erl -daemon -block erlang /pipe/ /mst/erlang_logs/ "beam.smp -A 1 -- -root /mst/erlang -- -home /mst --"</code> - </item> - </taglist> - The same argument munching as when starting Erlang/OTP without run_erl - has to be done. If <c>-daemon</c> is given then all error printouts - are sent to the ramlog. - See also - <seealso marker="erts:run_erl">run_erl</seealso> for more details. - </p> - <p> - Below is an example of how to get started with <c>run_erl_lm</c>. - <code>rtose@acp3400> pm_install run_erl_lm /mst/erlang/erts-6.0/bin/run_erl_lm -rtose@acp3400> pm_create run_erl_lm -pid: 0x1c005d -rtose@acp3400> pm_start 0x1c005d -rtose@acp3400> mkdir /mst/erlang_log -rtose@acp3400> run_erl -daemon /pipe/ /mst/erlang_log/ "/mst/erlang/erts-6.0/bin/beam.smp -A 1 -- -root /mst/erlang -- -home /mst --" -rtose@acp3400> to_erl -Attaching to /pipe/erlang.pipe.1 (^C to exit) -os:type(). -{ose,release} -2> -'to_erl' terminated.</code> - Note that Ctrl-C is used instead of Ctrl-D to exit the to_erl shell. - </p> - </section> - - <section> - <title>epmd</title> - <p> - In OSE epmd will not be started automatically so if you want to use - Erlang distribution you have to manually start epmd. - </p> - </section> - - <section> - <title>VM Process Priorities</title> - <p> - It is possible to set the priorities you want for the OSE processes that - thr emulator creates in the lmconf. An example of how to do it can be - found in the default lmconf file in - $ERL_TOP/erts/emulator/sys/ose/beam.lmconf. - </p> - </section> - -</chapter> diff --git a/lib/ose/doc/src/ose_signals_chapter.xml b/lib/ose/doc/src/ose_signals_chapter.xml deleted file mode 100644 index bcf2259577..0000000000 --- a/lib/ose/doc/src/ose_signals_chapter.xml +++ /dev/null @@ -1,240 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Interacting with Enea OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_signals_chapter.xml</file> - </header> - - <marker id="introduction"></marker> - <section> - <title>Introduction</title> - <p>The main way which programs on Enea OSE interact is through the - usage of message passing, much the same way as Erlang processes - communicate. There are two ways in which an Erlang programmer can - interact with the signals sent from other Enea OSE processes; either - through the provided <c>ose</c> module, or by writing a custom linked-in - driver. This User's Guide describes and provides examples for both - approaches. - </p> - </section> - - <marker id="erlang"></marker> - <section> - <title>Signals in Erlang</title> - <p>Erlang/OTP on OSE provides a erlang module called - <seealso marker="ose:ose">ose</seealso> that can be used to interact - with other OSE processes using message passing. The api in the module - is very similar to the native OSE api, so for details of how the - functions work please refer to the official OSE documenation. Below - is an example usage of the API. - </p> - <code>1> P1 = ose:open("p1"). -#Port>0.344> -2> ose:hunt(P1,"p2"). -{#Port>0.344>,1} -3> P2 = ose:open("p2"). -#Port>0.355> -4> flush(). -Shell got {mailbox_up,#Port>0.344>,{#Port>0.344>,1},852189} -ok -5> ose:listen(P1,[1234]). -ok -6> ose:send(P2,ose:get_id(P1),1234,>>"hello">>). -ok -7> flush(). -Shell got {message,#Port>0.344>,{852189,1245316,1234,>>"hello">>}} -ok</code> - </section> - - <marker id="driver"></marker> - <section> - <title>Signals in a Linked-in driver</title> - <p> - Writing Linked-in drivers for OSE is very similar to how it is done - for Unix/Windows. It is only the way in which the driver subscribes - and consumed external events that is different. In Unix (and Windows) - file descriptiors (and Event Objects) are used to select on. On OSE - we use signals to deliver the same functionality. There are two large - differences between a signal and an fd. - </p> - <p> - In OSE it is not possible for a signal number to be a unique identifier - for a resource in the same way as an fd is. For example; let's say we - implement a driver that does an asynchronous hunt that uses signal - number 1234 as the hunt_sig. If we want to be able to have multiple - hunt ports running at the same time we have to have someway of routing - the signal to the correct port. This is achieved by supplying a secondary - id that can be retrieved through the meta-data or payload of the signal, - e.g: - <code>ErlDrvEvent event = erl_drv_ose_event_alloc(1234,port,resolver);</code> - The event you get back from - <seealso marker="ose_erl_driver#erl_drv_ose_event_alloc"> - erl_drv_ose_event_alloc</seealso> can then be used by - <seealso marker="erts:erl_driver#driver_select">driver_select</seealso> - to subscribe to signals. The first argument is just the signal number - that we are interested in. The second is the id that we choose to use, - in this case the port id that we got in the - <seealso marker="erts:driver_entry#start">start</seealso> callback is - used. The third argument is a function pointer to a function that can - be used to figure out the id from a given signal. The fourth argument can - point to any additional data you might want to associate with the event. - There is a complete. You can examine the data contained in the event with - <seealso marker="ose_erl_driver#erl_drv_ose_event_fetch">erl_drv_ose_event_fetch</seealso> - , eg: - <code>erl_drv_ose_event_fetch(event, &signal, &port, (void **)&extra);</code> - example of what this could look like in - <seealso marker="#example">the next section</seealso>. - <note>It is very important to issue the driver_select call before - any of the signals you are interested in are sent. If driver_select - is called after the signal is sent, there is a high probability that it - will be lost.</note> - </p> - <p> - The other difference from unix is that in OSE the payload of the event - (i.e. the signal data) is already received when the ready_output/input - callbacks are called. This means that you access the data of a signal - by calling <seealso marker="ose_erl_driver#erl_drv_ose_get_signal"> - erl_drv_ose_get_signal</seealso>. Additionally multiple signals might be - associated with the event, so you should call - <seealso marker="ose_erl_driver#erl_drv_ose_get_signal"> - erl_drv_ose_get_signal</seealso> until <c>NULL</c> is returned. - </p> - </section> - - <marker id="example"></marker> - <section> - <title>Example Linked-in driver</title> -<code>#include "erl_driver.h" -#include "ose.h" - -struct huntsig { - SIGSELECT signo; - ErlDrvPort port; -}; - -union SIGNAL { - SIGSELECT signo; - struct huntsig; -} - -/* Here we have to get the id from the signal. In this case we use the - port id since we have control over the data structure of the signal. - It is however possible to use anything in here. The only restriction - is that the same id has to be used for all signals of the same number.*/ -ErlDrvOseEventId resolver(union SIGNAL *sig) { - return (ErlDrvOseEventId)sig->huntsig.port; -} - -static int drv_init(void) { return 0; }; - -static ErlDrvData drv_start(ErlDrvPort port, char *command) { - return (ErlDrvData)port; -} - -static ErlDrvSSizeT control(ErlDrvData driver_data, unsigned int cmd, - char *buf, ErlDrvSizeT len, - char **rbuf, ErlDrvSizeT rlen) { - ErlDrvPort port = (ErlDrvPort)driver_data; - - /* An example of extra data to associate with the event */ - char *extra_data = driver_alloc(80); - snprintf("extra_data, "Event, sig_no: 1234, and port: %d", port); - - /* Create a new event to select on */ - ErlDrvOseEvent evt = erl_drv_ose_event_alloc(1234,port,resolver, extra_data); - - /* Make sure to do the select call _BEFORE_ the signal arrives. - The signal might get lost if the hunt call is done before the - select. */ - driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,1); - - union SIGNAL *sig = alloc(sizeof(union SIGNAL),1234); - sig->huntsig.port = port; - hunt("testprocess",0,NULL,&sig); - return 0; -} - -static void ready_input(ErlDrvData driver_data, ErlDrvEvent evt) { - char *extra_data; - /* Get the first signal payload from the event */ - union SIGNAL *sig = erl_drv_ose_get_signal(evt); - ErlDrvPort port = (ErlDrvPort)driver_data; - while (sig != NULL) { - if (sig->signo == 1234) { - /* Print out the string we added as the extra parameter */ - erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&extra_data); - printf("We've received: %s\n", extra_data); - - /* If it is our signal we send a message with the sender of the signal - to the controlling erlang process */ - ErlDrvTermData reply[] = { ERL_DRV_UINT, (ErlDrvUInt)sender(&sig) }; - erl_drv_send_term(port,reply,sizeof(reply) / sizeof(reply[0])); - } - - /* Cleanup the signal and deselect on the event. - Note that the event itself has to be free'd in the stop_select - callback. */ - free_buf(&sig); - driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,0); - - /* There could be more than one signal waiting in this event, so - we have to loop until sig == NULL */ - sig = erl_drv_ose_get_signal(evt); - } -} - -static void stop_select(ErlDrvEvent event, void *reserved) -{ - /* Free the extra_data */ - erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&extra_data); - driver_free(extra_data); - - /* Free the event itself */ - erl_drv_ose_event_free(event); -} - -/** - * Setup the driver entry for the Erlang runtime - **/ -ErlDrvEntry ose_signal_driver_entry = { - .init = drv_init, - .start = drv_start, - .stop = drv_stop, - .ready_input = ready_input, - .driver_name = DRIVER_NAME, - .control = control, - .extended_marker = ERL_DRV_EXTENDED_MARKER, - .major_version = ERL_DRV_EXTENDED_MAJOR_VERSION, - .minor_version = ERL_DRV_EXTENDED_MINOR_VERSION, - .driver_flags = ERL_DRV_FLAG_USE_PORT_LOCKING, - .stop_select = stop_select -}; -</code> - </section> - -</chapter> diff --git a/lib/ose/doc/src/part.xml b/lib/ose/doc/src/part.xml deleted file mode 100644 index 0c9ebd16c0..0000000000 --- a/lib/ose/doc/src/part.xml +++ /dev/null @@ -1,39 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE part SYSTEM "part.dtd"> - -<part xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>2014</year> - <year>2014</year> - <holder>Ericsson AB, All Rights Reserved</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - The Initial Developer of the Original Code is Ericsson AB. - </legalnotice> - - <title>OSE User's Guide</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>part.xml</file> - </header> - <description> - <p><em>OSE</em>.</p> - </description> - <xi:include href="ose_intro.xml"/> - <xi:include href="ose_signals_chapter.xml"/> -</part> diff --git a/lib/ose/doc/src/ref_man.xml b/lib/ose/doc/src/ref_man.xml deleted file mode 100644 index 964e5ab8ff..0000000000 --- a/lib/ose/doc/src/ref_man.xml +++ /dev/null @@ -1,40 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE application SYSTEM "application.dtd"> - -<application xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE Reference Manual</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>ref_man.xml</file> - </header> - <description> - <p>The Standard Erlang Libraries application, <em>STDLIB</em>, - contains modules for manipulating lists, strings and files etc.</p> - <br></br> - </description> - <xi:include href="ose_app.xml"/> - <xi:include href="ose.xml"/> - <xi:include href="ose_erl_driver.xml"/> -</application> diff --git a/lib/ose/ebin/.gitignore b/lib/ose/ebin/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/ebin/.gitignore +++ /dev/null diff --git a/lib/ose/include/.gitignore b/lib/ose/include/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/include/.gitignore +++ /dev/null diff --git a/lib/ose/info b/lib/ose/info deleted file mode 100644 index 85c07dbe82..0000000000 --- a/lib/ose/info +++ /dev/null @@ -1,2 +0,0 @@ -group: misc Miscellaneous Applications -short: Description of Enea OSE specific functionality diff --git a/lib/ose/src/Makefile b/lib/ose/src/Makefile deleted file mode 100644 index a89e9392e9..0000000000 --- a/lib/ose/src/Makefile +++ /dev/null @@ -1,107 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1996-2013. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# - -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Application version -# ---------------------------------------------------- -include ../vsn.mk -VSN=$(OSE_VSN) - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/lib/ose-$(VSN) - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- -MODULES= \ - ose - -HRL_FILES= - -INTERNAL_HRL_FILES= - -ERL_FILES= $(MODULES:%=%.erl) - -TARGET_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) $(APP_TARGET) $(APPUP_TARGET) - -APP_FILE= ose.app - -APP_SRC= $(APP_FILE).src -APP_TARGET= $(EBIN)/$(APP_FILE) - -APPUP_FILE= ose.appup - -APPUP_SRC= $(APPUP_FILE).src -APPUP_TARGET= $(EBIN)/$(APPUP_FILE) - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- - -ifeq ($(NATIVE_LIBS_ENABLED),yes) -ERL_COMPILE_FLAGS += +native -endif -ERL_COMPILE_FLAGS += -I../include -I../../kernel/include -Werror - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- - -debug opt: $(TARGET_FILES) - -clean: - rm -f $(TARGET_FILES) - rm -f core - rm -f erl_parse.erl - -docs: - -# ---------------------------------------------------- -# Special Build Targets -# ---------------------------------------------------- - -$(APP_TARGET): $(APP_SRC) ../vsn.mk - $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ - -$(APPUP_TARGET): $(APPUP_SRC) ../vsn.mk - $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_spec: opt - $(INSTALL_DIR) "$(RELSYSDIR)/src" - $(INSTALL_DATA) $(ERL_FILES) "$(RELSYSDIR)/src" - $(INSTALL_DIR) "$(RELSYSDIR)/include" - $(INSTALL_DIR) "$(RELSYSDIR)/ebin" - $(INSTALL_DATA) $(TARGET_FILES) "$(RELSYSDIR)/ebin" - -release_docs_spec: - -# ---------------------------------------------------- -# Dependencies -- alphabetically, please -# ---------------------------------------------------- diff --git a/lib/ose/src/ose.app.src b/lib/ose/src/ose.app.src deleted file mode 100644 index 036779eb16..0000000000 --- a/lib/ose/src/ose.app.src +++ /dev/null @@ -1,28 +0,0 @@ -%% This is an -*- erlang -*- file. -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1996-2011. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% -{application, ose, - [{description, "Enea OSE specific modules"}, - {vsn, "%VSN%"}, - {modules, [ose]}, - {registered,[]}, - {applications, [stdlib,kernel]}, - {env, []}, - {runtime_dependencies, ["stdlib-2.0","erts-6.0"]}]}. diff --git a/lib/ose/src/ose.appup.src b/lib/ose/src/ose.appup.src deleted file mode 100644 index 28b6da3439..0000000000 --- a/lib/ose/src/ose.appup.src +++ /dev/null @@ -1,23 +0,0 @@ -%% -*- erlang -*- -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1999-2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -{"%VSN%", - [ - ], - [ - ]}. diff --git a/lib/ose/src/ose.erl b/lib/ose/src/ose.erl deleted file mode 100644 index 5534dba4d4..0000000000 --- a/lib/ose/src/ose.erl +++ /dev/null @@ -1,453 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% -%% @doc Interface module for OSE messaging and process monitoring from Erlang -%% -%% For each mailbox created through {@link open/1} a OSE phantom process with -%% that name is started. Since phantom processes are used the memory footprint -%% of each mailbox is quite small. -%% -%% To receive messages you first have to subscribe to the specific message -%% numbers that you are interested in with {@link listen/2}. The messages -%% will be sent to the Erlang process that created the mailbox. -%% -%% @end -%% --module(ose). - -%%============================================================================== -%% Exported API -%%============================================================================== --export([open/1, - close/1, - get_id/1, - get_name/2, - hunt/2, - dehunt/2, - attach/2, - detach/2, - send/4, - send/5, - listen/2 - ]). - -%%============================================================================== -%% Types -%%============================================================================== --opaque mailbox() :: port(). -%% Mailbox handle. Implemented as an erlang port. - --opaque mailbox_id() :: integer(). -%% Mailbox ID, this is the same as the process id of an OSE process. -%% An integer. - --type message_number() :: 0..4294967295. -%% OSE Signal number - --opaque hunt_ref() :: {mailbox(),integer()}. -%% Reference from a hunt request. This term will be included -%% in a successful hunt response. - --opaque attach_ref() :: {mailbox(),integer()}. -%% Reference from an attach request. This term will be included -%% in the term returned when the attached mailbox disappears. - --export_type([mailbox_id/0, - message_number/0, - mailbox/0, - hunt_ref/0, - attach_ref/0]). - -%%============================================================================== -%% Defines -%%============================================================================== --define(DRIVER_NAME, "ose_signal_drv"). --define(GET_SPID, 1). --define(GET_NAME, 2). --define(HUNT, 100). --define(DEHUNT, 101). --define(ATTACH, 102). --define(DETACH, 103). --define(SEND, 104). --define(SEND_W_S, 105). --define(LISTEN, 106). --define(OPEN, 200). - --define(INT_32BIT(Int),(is_integer(Int) andalso (Int >= 0) andalso (Int < (1 bsl 32)))). - -%%============================================================================== -%% API functions -%%============================================================================== - -%%------------------------------------------------------------------------------ -%% @doc Create a mailbox with the given name and return a port that handles -%% the mailbox. -%% -%% An OSE phantom process with the given name will be created that will send any -%% messages sent through this mailbox. Any messages sent to the new OSE process -%% will automatically be converted to an Erlang message and sent to the Erlang -%% process that calls this function. See {@link listen/2} for details about the -%% format of the message sent. -%% -%% The caller gets linked to the created mailbox. -%% -%% raises: `badarg' | `system_limit' -%% -%% @see listen/2 -%% @end -%%------------------------------------------------------------------------------ --spec open(Name) -> Port when - Name :: iodata(), - Port :: mailbox(). -open(Name) -> - try open_port({spawn_driver,?DRIVER_NAME}, [binary]) of - Port -> - try port_command(Port,[?OPEN,Name]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - close(Port), - erlang:error(Error,[Name]); - {ose_drv_reply,Port,ok} -> - Port - end - catch - error:badarg -> close(Port),erlang:error(badarg,[Name]) - end - catch - error:badarg -> erlang:error(badarg,[Name]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Close a mailbox -%% -%% This kills the OSE phantom process associated with this mailbox. -%% -%% Will also consume any ``{'EXIT',Port,_}'' message from the port that comes -%% due to the port closing when the calling process traps exits. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec close(Port) -> ok when - Port :: mailbox(). -close(Port) when is_port(Port) -> - %% Copied from prim_inet - case erlang:process_info(self(), trap_exit) of - {trap_exit,true} -> - link(Port), - catch erlang:port_close(Port), - receive {'EXIT',Port,_} -> ok end; - {trap_exit,false} -> - catch erlang:port_close(Port), - ok - end; -close(NotPort) -> - erlang:error(badarg,[NotPort]). - -%%------------------------------------------------------------------------------ -%% @doc Get the mailbox id for the given port. -%% -%% The mailbox id is the same as the OSE process id of the OSE phantom process -%% that this mailbox represents. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec get_id(Port) -> Pid when - Port :: mailbox(), - Pid :: mailbox_id(). -get_id(Port) -> - try port_control(Port, ?GET_SPID, <<>>) of - <<Spid:32>> -> Spid - catch error:_Error -> - erlang:error(badarg,[Port]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Get the mailbox name for the given mailbox id. -%% -%% The mailbox name is the name of the OSE process with process id Pid. -%% -%% This call will fail with badarg if the underlying system does not support -%% getting the name from a process id. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec get_name(Port, Pid) -> Name | undefined when - Port :: mailbox(), - Pid :: mailbox_id(), - Name :: binary(). -get_name(Port, Pid) when ?INT_32BIT(Pid) -> - try port_control(Port, ?GET_NAME, <<Pid:32>>) of - [] -> undefined; - Res -> Res - catch error:_Error -> - erlang:error(badarg,[Port,Pid]) - end; -get_name(Port, Pid) -> - erlang:error(badarg,[Port,Pid]). - - -%%------------------------------------------------------------------------------ -%% @doc Hunt for OSE process by name. -%% -%% Will send `{mailbox_up, Port, Ref, MboxId}' -%% to the calling process when the OSE process becomes available. -%% -%% Returns a reference term that can be used to cancel the hunt -%% using {@link dehunt/2}. -%% -%% raises: `badarg' -%% -%% @end -%%------------------------------------------------------------------------------ --spec hunt(Port, HuntPath) -> Ref when - Port :: mailbox(), - HuntPath :: iodata(), - Ref :: hunt_ref(). -hunt(Port, HuntPath) -> - try port_command(Port, [?HUNT,HuntPath]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,HuntPath]); - {ose_drv_reply,Port,Ref} -> - Ref - end - catch error:_Error -> - erlang:error(badarg,[Port,HuntPath]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Stop hunting for OSE process. -%% -%% If a message for this hunt has been sent but not received -%% by the calling process, it is removed from the message queue. -%% Note that this only works if the same process that did -%% the hunt does the dehunt. -%% -%% raises: `badarg' -%% -%% @see hunt/2 -%% @end -%%------------------------------------------------------------------------------ --spec dehunt(Port, Ref) -> ok when - Port :: mailbox(), - Ref :: hunt_ref(). -dehunt(Port, {Port,Ref}) when ?INT_32BIT(Ref) -> - try port_command(Port, <<?DEHUNT:8, Ref:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,enoent}} -> - %% enoent could mean that it is in the message queue - receive - {mailbox_up, Port, {Port,Ref}, _} -> - ok - after 0 -> - ok - end; - {ose_drv_reply,Port,ok} -> - ok - end - catch error:_Error -> - erlang:error(badarg,[Port,{Port,Ref}]) - end; -dehunt(Port,Ref) -> - erlang:error(badarg,[Port,Ref]). - -%%------------------------------------------------------------------------------ -%% @doc Attach to an OSE process. -%% -%% Will send `{mailbox_down, Port, Ref, MboxId}' -%% to the calling process if the OSE process exits. -%% -%% Returns a reference that can be used to cancel the attachment -%% using {@link detach/2}. -%% -%% raises: `badarg' | `enomem' -%% -%% @end -%%------------------------------------------------------------------------------ --spec attach(Port,Pid) -> Ref when - Port :: mailbox(), - Pid :: mailbox_id(), - Ref :: attach_ref(). -attach(Port, Spid) when ?INT_32BIT(Spid) -> - try port_command(Port, <<?ATTACH:8, Spid:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,Spid]); - {ose_drv_reply,Port,Ref} -> - Ref - end - catch error:_Error -> - erlang:error(badarg,[Port,Spid]) - end; -attach(Port,Spid) -> - erlang:error(badarg,[Port,Spid]). - - -%%------------------------------------------------------------------------------ -%% @doc Remove attachment to an OSE process. -%% -%% If a message for this monitor has been sent but not received -%% by the calling process, it is removed from the message queue. -%% Note that this only works of the same process -%% that did the attach does the detach. -%% -%% raises: `badarg' -%% -%% @see attach/2 -%% @end -%%------------------------------------------------------------------------------ --spec detach(Port,Ref) -> ok when - Port :: mailbox(), - Ref :: attach_ref(). -detach(Port, {Port,Ref} ) when ?INT_32BIT(Ref) -> - try port_command(Port, <<?DETACH:8, Ref:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,enoent}} -> - %% enoent could mean that it is in the message queue - receive - {mailbox_down,Port,{Port,Ref},_} -> - ok - after 0 -> - ok - end; - {ose_drv_reply,Port,ok} -> - ok - end - catch error:_Error -> - erlang:error(badarg,[Port,{Port,Ref}]) - end; -detach(Port,Ref) -> - erlang:error(badarg,[Port,Ref]). - -%%------------------------------------------------------------------------------ -%% @doc Send an OSE message. -%% -%% The message is sent from the OSE process' own ID that is: `get_id(Port)'. -%% -%% raises: `badarg' -%% -%% @see send/5 -%% @end -%%------------------------------------------------------------------------------ --spec send(Port,Pid,SigNo,SigData) -> ok when - Port :: mailbox(), - Pid :: mailbox_id(), - SigNo :: message_number(), - SigData :: iodata(). -send(Port, Spid, SigNo, SigData) when ?INT_32BIT(Spid), ?INT_32BIT(SigNo) -> - try erlang:port_command(Port, [<<?SEND:8, Spid:32, SigNo:32>>, SigData]) of - true -> ok - catch error:_Error -> - erlang:error(badarg,[Port,Spid,SigNo,SigData]) - end; -send(Port,Spid,SigNo,SigData) -> - erlang:error(badarg,[Port,Spid,SigNo,SigData]). - - -%%------------------------------------------------------------------------------ -%% @doc Send an OSE message with different sender. -%% -%% As {@link send/4} but the sender will be `SenderPid'. -%% -%% raises: `badarg' -%% -%% @see send/4 -%% @end -%%------------------------------------------------------------------------------ --spec send(Port,Pid,SenderPid,SigNo,SigData) -> ok when - Port :: mailbox(), - Pid :: mailbox_id(), - SenderPid :: mailbox_id(), - SigNo :: message_number(), - SigData :: iodata(). -send(Port, Spid, SenderPid, SigNo, SigData) - when ?INT_32BIT(Spid), ?INT_32BIT(SenderPid), ?INT_32BIT(SigNo) -> - try erlang:port_command(Port, [<<?SEND_W_S:8, Spid:32, SenderPid:32, - SigNo:32>>, SigData]) of - true -> ok - catch error:_Error -> - erlang:error(badarg,[Port,Spid,SenderPid,SigNo,SigData]) - end; -send(Port,Spid,SenderPid,SigNo,SigData) -> - erlang:error(badarg,[Port,Spid,SenderPid,SigNo,SigData]). - -%%------------------------------------------------------------------------------ -%% @doc Start listening for specified OSE signal numbers. -%% -%% The mailbox will send `{message,Port,{FromMboxId,ToMboxId,MsgNo,MsgData}}' -%% to the process that created the mailbox when an OSE message with any -%% of the specified `SigNos' arrives. -%% -%% Repeated calls to listen will replace the current set of signal numbers to -%% listen to. i.e -%% -%% ```1>ose:listen(MsgB,[1234,12345]). -%% ok -%% 2> ose:listen(MsgB,[1234,123456]). -%% ok.''' -%% -%% The above will first listen for signals with numbers 1234 and 12345, and then -%% replace that with only listening to 1234 and 123456. -%% -%% With the current implementation it is not possible to listen to all signal -%% numbers. -%% -%% raises: `badarg' | `enomem' -%% -%% @end -%%------------------------------------------------------------------------------ --spec listen(Port, SigNos) -> ok when - Port :: mailbox(), - SigNos :: list(message_number()). -listen(Port, SigNos) when is_list(SigNos) -> - USSigNos = lists:usort(SigNos), - BinSigNos = try - << <<SigNo:32>> || - SigNo <- USSigNos, - ?INT_32BIT(SigNo) orelse erlang:error(badarg) - >> - catch _:_ -> - erlang:error(badarg,[Port,SigNos]) - end, - try port_command(Port, [?LISTEN, BinSigNos]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,SigNos]); - {ose_drv_reply,Port,Else} -> - Else - end - catch error:_Error -> - erlang:error(badarg,[Port,SigNos]) - end; -listen(Port, SigNos) -> - erlang:error(badarg,[Port,SigNos]). - - -%%%============================================================================= -%%% Internal functions -%%%============================================================================= diff --git a/lib/ose/test/Makefile b/lib/ose/test/Makefile deleted file mode 100644 index 7e2080ba38..0000000000 --- a/lib/ose/test/Makefile +++ /dev/null @@ -1,67 +0,0 @@ -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- - -MODULES= \ - ose_SUITE - -ERL_FILES= $(MODULES:%=%.erl) - -TARGET_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) - -INSTALL_PROGS= $(TARGET_FILES) - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/ose_test - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- - -ERL_MAKE_FLAGS += -ERL_COMPILE_FLAGS += -I$(ERL_TOP)/lib/test_server/include \ - -I$(ERL_TOP)/lib/kernel/include - -EBIN = . - -EMAKEFILE=Emakefile -COVERFILE=ose.cover - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- - -make_emakefile: - $(ERL_TOP)/make/make_emakefile $(ERL_COMPILE_FLAGS) -o$(EBIN) $(MODULES) \ - > $(EMAKEFILE) - -tests debug opt: make_emakefile - erl $(ERL_MAKE_FLAGS) -make - -clean: - rm -f $(EMAKEFILE) - rm -f $(TARGET_FILES) - rm -f core - -docs: - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_spec: opt - -release_tests_spec: make_emakefile - $(INSTALL_DIR) "$(RELSYSDIR)" - $(INSTALL_DATA) ose.spec $(EMAKEFILE) \ - $(ERL_FILES) $(COVERFILE) "$(RELSYSDIR)" - chmod -R u+w "$(RELSYSDIR)" - @tar cf - *_SUITE_data | (cd "$(RELSYSDIR)"; tar xf -) - -release_docs_spec: diff --git a/lib/ose/test/ose.cover b/lib/ose/test/ose.cover deleted file mode 100644 index 7b846cfaf6..0000000000 --- a/lib/ose/test/ose.cover +++ /dev/null @@ -1,2 +0,0 @@ -%% -*- erlang -*- -{incl_app,ose,details}. diff --git a/lib/ose/test/ose.spec b/lib/ose/test/ose.spec deleted file mode 100644 index c897e8cd16..0000000000 --- a/lib/ose/test/ose.spec +++ /dev/null @@ -1 +0,0 @@ -{suites,"../ose_test",all}. diff --git a/lib/ose/test/ose_SUITE.erl b/lib/ose/test/ose_SUITE.erl deleted file mode 100644 index 31d950bd03..0000000000 --- a/lib/ose/test/ose_SUITE.erl +++ /dev/null @@ -1,766 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1998-2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% --module(ose_SUITE). - -%-compile(export_all). - --export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1, - init_per_group/2,end_per_group/2,init_per_testcase/2, - end_per_testcase/2]). --export([ - basic/1,stress/1,multi_msg_numbers/1,multi_mailboxes/1, - hunt/1,multi_hunt/1,dehunt/1,multi_dehunt/1, - attach/1,multi_attach/1,detach/1,multi_detach/1, - open_errors/1,close_errors/1,get_id_errors/1,get_name_errors/1, - hunt_errors/1,dehunt_errors/1,attach_errors/1,detach_errors/1, - send_errors/1,send_w_s_errors/1,listen_errors/1 - ]). - --define(INTERFACE,ose). - - -init_per_testcase(_Func, Config) -> - Config. -end_per_testcase(_Func, _Config) -> - ok. - -suite() -> [{timeout,{30,seconds}}]. - -all() -> - [ - basic,stress,multi_msg_numbers,multi_mailboxes, - hunt,multi_hunt,dehunt,multi_dehunt, - attach,multi_attach,detach,multi_detach, - - open_errors,close_errors,get_id_errors,get_name_errors, - hunt_errors,dehunt_errors,attach_errors,detach_errors, - send_errors,send_w_s_errors,listen_errors - ]. - -groups() -> - []. - -init_per_suite(Config) -> - case os:type() of - {ose,_} -> - Config; - _Else -> - {skip,"Only run on OSE"} - end. - -end_per_suite(_Config) -> - ok. - -init_per_group(_GroupName, Config) -> - Config. - -end_per_group(_GroupName, Config) -> - Config. - -basic(_Config) -> - - [P1,P2] = multi_open(2,[42]), - P1Id = ?INTERFACE:get_id(P1), - P2Id = ?INTERFACE:get_id(P2), - - ok = ?INTERFACE:send(P2,P1Id,42,<<"ping">>), - receive - {message,P1,V1} -> - {P2Id,P1Id,42,<<"ping">>} = V1, - ?INTERFACE:send(P1,P2Id,42,<<"pong">>); - Else1 -> - ct:fail({got_wrong_message,Else1}) - end, - - receive - {message,P2,V2} -> - {P1Id,P2Id,42,<<"pong">>} = V2; - Else2 -> - ct:fail({got_wrong_message,Else2}) - end, - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - -%% Send 1000 messages and see if we can cope and that msg order is preserved -stress(_Config) -> - - Iterations = 1000, - - [P1,P2] = multi_open(2,[42]), - P1Id = ?INTERFACE:get_id(P1), - P2Id = ?INTERFACE:get_id(P2), - - spawn(fun() -> - n(fun(N) -> - Msg = [<<"ping">>|integer_to_list(N)], - ?INTERFACE:send(P2,P1Id,42,Msg) - end,Iterations) - end), - timer:sleep(100), - n(fun(N) -> - receive - {message,P1,Value} -> - Int = integer_to_binary(N), - {P2Id,P1Id,42,<<"ping",Int/binary>>} = Value, - ok; - Else -> - ct:fail({got_wrong_message,Else}) - end - end,Iterations), - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - -%% Listen to 1000 different message numbers and send some random messages -multi_msg_numbers(_Config) -> - - Iterations = 100, - - [P1,P2] = multi_open(2,lists:seq(2000,3000)), - P1Id = ?INTERFACE:get_id(P1), - - n(fun(_) -> - Num = random:uniform(1000)+2000, - ?INTERFACE:send(P2,P1Id,Num,<<"ping",(integer_to_binary(Num))/binary>>) - end,Iterations), - - n(fun(_) -> - receive - {message,P1,{_,_,Id,<<"ping",Num/binary>>}} when Id > 2000; - Id =< 3000 -> - Id = binary_to_integer(Num), - ok; - Else -> - ct:fail({got_wrong_message,Else}) - end - end,Iterations), - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - - -%% Create 100 mailboxes and send messages to them -multi_mailboxes(_Config) -> - - Mailboxes = 100, - - [P1|MBs] = multi_open(Mailboxes,[42]), - - [?INTERFACE:send(P1,?INTERFACE:get_id(P),42,[<<"ping">>,?INTERFACE:get_name(P,?INTERFACE:get_id(P))]) || P <- MBs], - - [receive - {message,P,Value} -> - Name = ?INTERFACE:get_name(P,?INTERFACE:get_id(P)), - {_,_,42,<<"ping",Name/binary>>} = Value, - ok - end || P <- MBs], - - [?INTERFACE:close(P) || P <- [P1|MBs]], - ok. - -hunt(_Config) -> - [P1,P2] = multi_open(2,[]), - - Ref = ?INTERFACE:hunt(P1,"p2"), - receive - {mailbox_up,P1,Ref,Pid} -> - Pid = ?INTERFACE:get_id(P2), - ?INTERFACE:close(P1), - ?INTERFACE:close(P2); - Else -> - ct:fail({got_wrong_message,Else,Ref}) - end. - -multi_hunt(_Config) -> - - Iterations = 100, - - P = ?INTERFACE:open("p"), - - Refs = [?INTERFACE:hunt(P,"p"++integer_to_list(N))|| N <- lists:seq(1,Iterations)], - - Pids = [begin - Prt = ?INTERFACE:open("p"++integer_to_list(N)), - Pid = ?INTERFACE:get_id(Prt), - ?INTERFACE:close(Prt), - Pid - end || N <- lists:seq(1,Iterations)], - - [receive - {mailbox_up,P,Ref,Pid} -> - ok - after 10 -> - ct:fail({did_not_get,Pid,Ref}) - end || {Pid,Ref} <- lists:zip(Pids,Refs)], - ?INTERFACE:close(P). - - -dehunt(_Config) -> - [P1] = multi_open(1,[]), - Ref = ?INTERFACE:hunt(P1,"p2"), - receive - _Else -> ct:fail({got,_Else}) - after 1000 -> - ok - end, - P2 = ?INTERFACE:open("p2"), - - % Make sure any messages are sent - receive after 10 -> ok end, - - ok = ?INTERFACE:dehunt(P1,Ref), - - % Make sure no messages are received - receive - _Else2 -> ct:fail({got,_Else2}) - after 1000 -> - ?INTERFACE:close(P1), - ?INTERFACE:close(P2) - end. - -%%% -%%% This testcase basically: -%%% spawn 10 processes that in parallel -%%% adds some hunts for different OSE processes -%%% maybe create hunted OSE process -%%% dehunt half of the hunts -%%% create more hunts -%%% if not created create hunted OSE process -%%% veryify that all expected hunt messages are received -%%% verify that all processes exited correctly -%%% -%%% This complex test is done to make sure that the internal handling -%%% of dehunt works as expected. -%%% -multi_dehunt(_Config) -> - [P1] = multi_open(1,[]), - - Scenario = - fun(Iterations) -> - - Hunted = "p"++integer_to_list(Iterations), - %% Start a couple of hunts - Refs = [?INTERFACE:hunt(P1,Hunted) || _ <- lists:seq(1,Iterations)], - - %% We alternate if the process is opened before or after the dehunt - P2O = if Iterations rem 2 == 0 -> - ?INTERFACE:open(Hunted); - true -> - undefined - end, - - %% Remove half of them - {RemRefs,_} = lists:mapfoldl(fun(Ref,Acc) when Acc rem 2 == 0 -> - ok = ?INTERFACE:dehunt(P1,Ref), - {[],Acc+1}; - (Ref,Acc) -> - {Ref,Acc+1} - end,0,Refs), - - %% Add some new ones - NewRefs = [?INTERFACE:hunt(P1,Hunted) - || _ <- lists:seq(1,Iterations div 4)] - ++ lists:flatten(RemRefs), - - P2 = if P2O == undefined -> - ?INTERFACE:open(Hunted); - true -> - P2O - end, - P2Id = ?INTERFACE:get_id(P2), - - %% Receive all the expected ones - lists:foreach(fun(Ref) -> - receive - {mailbox_up,P1,Ref,P2Id} -> - ok - after 1000 -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{did_not_get, Ref}}]), - ok = Ref - end - end,NewRefs), - - %% Check that no other have arrived - receive - _Else -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{got, _Else}}]), - ok = _Else - after 100 -> - ok - end, - ?INTERFACE:close(P2) - end, - - Self = self(), - - n(fun(N) -> - spawn(fun() -> Self ! - Scenario(N*25) - end), - ok - end,10), - - n(fun(_N) -> - receive ok -> ok - after 60000 -> ct:fail(failed) - end - end,10), - ?INTERFACE:close(P1). - -attach(_Config) -> - [P1,P2] = multi_open(2,[]), - - P2Id = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:attach(P1,P2Id), - ?INTERFACE:close(P2), - receive - {mailbox_down,P1,Ref,P2Id} -> - ?INTERFACE:close(P1); - _Else -> - ct:fail({got,_Else, {P1,Ref,P2Id}}) - after 1000 -> - ct:fail({did_not_get,P1,Ref,P2Id}) - end. - -multi_attach(_Config) -> - - Iterations = 100, - - [P1|Pids] = multi_open(Iterations,[]), - - Refs = [{?INTERFACE:get_id(Pid),?INTERFACE:attach(P1,?INTERFACE:get_id(Pid))} || Pid <- Pids], - - [?INTERFACE:close(Pid) || Pid <- Pids], - - [receive - {mailbox_down,P1,Ref,Pid} -> - ok - after 10000 -> - ct:fail({did_not_get,Pid,Ref}) - end || {Pid,Ref} <- Refs], - ?INTERFACE:close(P1). - -detach(_Config) -> - [P1,P2] = multi_open(2,[]), - P2Id = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:attach(P1,P2Id), - receive - _Else -> ct:fail({got,_Else}) - after 100 -> - ok - end, - - ?INTERFACE:close(P2), - - % Make sure any messages are sent - receive after 10 -> ok end, - - ?INTERFACE:detach(P1,Ref), - - % Make sure no messages are received - receive - _Else2 -> ct:fail({got,_Else2}) - after 1000 -> - ?INTERFACE:close(P1) - end. - -%%% -%%% This testcase basically: -%%% spawn 10 processes that in parallel -%%% adds some attach for different OSE processes -%%% maybe close OSE process -%%% dehunt half of the hunts -%%% create more hunts -%%% if not closed close attached OSE process -%%% veryify that all expected attach messages are received -%%% verify that all processes exited correctly -%%% -%%% This complex test is done to make sure that the internal handling -%%% of dehunt works as expected. -%%% -multi_detach(_Config) -> - [P1] = multi_open(1,[]), - - Scenario = - fun(Iterations) -> - - Attached = ?INTERFACE:open("p"++integer_to_list(Iterations)), - AttachedId = ?INTERFACE:get_id(Attached), - %% Start a couple of attachs - Refs = [?INTERFACE:attach(P1,AttachedId) || _ <- lists:seq(1,Iterations)], - - %% We alternate if the process is closed before or after the detach - P2O = if Iterations rem 2 == 0 -> - ?INTERFACE:close(Attached); - true -> - undefined - end, - - %% Remove half of them - {RemRefs,_} = lists:mapfoldl(fun(Ref,Acc) when Acc rem 2 == 0 -> - ok = ?INTERFACE:detach(P1,Ref), - {[],Acc+1}; - (Ref,Acc) -> - {Ref,Acc+1} - end,0,Refs), - - %% Add some new ones - NewRefs = [?INTERFACE:attach(P1,AttachedId) - || _ <- lists:seq(1,Iterations div 4)] - ++ lists:flatten(RemRefs), - - if P2O == undefined -> - ?INTERFACE:close(Attached); - true -> - P2O - end, - - %% Receive all the expected ones - lists:foreach(fun(Ref) -> - receive - {mailbox_down,P1,Ref,AttachedId} -> - ok - after 1000 -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{did_not_get, Ref}}]), - ok = Ref - end - end,NewRefs), - - %% Check that no other have arrived - receive - _Else -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{got, _Else}}]), - ok = _Else - after 100 -> - ok - end - end, - - Self = self(), - - n(fun(N) -> - spawn(fun() -> Self ! - Scenario(N*5) - end), - ok - end,10), - - n(fun(_N) -> - receive ok -> ok - after 60000 -> ct:fail(failed) - end - end,10), - ?INTERFACE:close(P1). - - -open_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,open,[inval],_}|_]}} = - (catch ?INTERFACE:open(inval)), - {'EXIT',{badarg,[{?INTERFACE,open,[["p"|1]],_}|_]}} = - (catch ?INTERFACE:open(["p"|1])), - {'EXIT',{badarg,[{?INTERFACE,open,[["p",1234]],_}|_]}} = - (catch ?INTERFACE:open(["p",1234])), - - ok. - -close_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,close,[inval],_}|_]}} = - (catch ?INTERFACE:close(inval)), - - P1 = ?INTERFACE:open("p1"), - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P1). - - -get_id_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,get_id,[inval],_}|_]}} = - (catch ?INTERFACE:get_id(inval)), - - P1 = ?INTERFACE:open("p1"), - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,get_id,[P1],_}|_]}} = - (catch ?INTERFACE:get_id(P1)), - - ok. - -get_name_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - {'EXIT',{badarg,[{?INTERFACE,get_name,[P1,inval],_}|_]}} = - (catch ?INTERFACE:get_name(P1,inval)), - - undefined = ?INTERFACE:get_name(P1,1234), - - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,get_name,[P1,P2Id],_}|_]}} = - (catch ?INTERFACE:get_name(P1,P2Id)), - ?INTERFACE:close(P2), - - P3 = ?INTERFACE:open([255]), - <<255>> = ?INTERFACE:get_name(P3, ?INTERFACE:get_id(P3)), - ?INTERFACE:close(P3), - - ok. - -hunt_errors(_Config) -> - - {'EXIT',{badarg,[{?INTERFACE,hunt,[inval,"hello"],_}|_]}} = - (catch ?INTERFACE:hunt(inval,"hello")), - - P1 = ?INTERFACE:open("p1"), - {'EXIT',{badarg,[{?INTERFACE,hunt,[P1,["hello",12345]],_}|_]}} = - (catch ?INTERFACE:hunt(P1,["hello",12345])), - - P2 = ?INTERFACE:open(<<255>>), - P2Pid = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:hunt(P1,[255]), - receive - {mailbox_up,P1,Ref,P2Pid} -> - ok; - Else -> - ct:fail({got,Else,{mailbox_up,P1,Ref,P2Pid}}) - after 150 -> - ct:fail({did_not_get,{mailbox_up,P1,Ref,P2Pid}}) - end, - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P2), - {'EXIT',{badarg,[{?INTERFACE,hunt,[P1,["hello"]],_}|_]}} = - (catch ?INTERFACE:hunt(P1,["hello"])), - - ok. - -dehunt_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - Ref = ?INTERFACE:hunt(P1,"p2"), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[inval,Ref],_}|_]}} = - (catch ?INTERFACE:dehunt(inval,Ref)), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[P1,inval],_}|_]}} = - (catch ?INTERFACE:dehunt(P1,inval)), - - ok = ?INTERFACE:dehunt(P1,Ref), - ok = ?INTERFACE:dehunt(P1,Ref), - - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[P1,Ref],_}|_]}} = - (catch ?INTERFACE:dehunt(P1,Ref)), - - case ?INTERFACE of - ose -> ok; - _ -> - P2 = ?INTERFACE:open("p2"), - ok = ?INTERFACE:close(P2) - end, - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -attach_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - {'EXIT',{badarg,[{?INTERFACE,attach,[inval,P2Id],_}|_]}} = - (catch ?INTERFACE:attach(inval,P2Id)), - - {'EXIT',{badarg,[{?INTERFACE,attach,[P1,[12345]],_}|_]}} = - (catch ?INTERFACE:attach(P1,[12345])), - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P2), - {'EXIT',{badarg,[{?INTERFACE,attach,[P1,P2Id],_}|_]}} = - (catch ?INTERFACE:attach(P1,P2Id)), - - ok. - -detach_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - Ref = ?INTERFACE:attach(P1,P2Id), - - {'EXIT',{badarg,[{?INTERFACE,detach,[inval,Ref],_}|_]}} = - (catch ?INTERFACE:detach(inval,Ref)), - - {'EXIT',{badarg,[{?INTERFACE,detach,[P1,inval],_}|_]}} = - (catch ?INTERFACE:detach(P1,inval)), - - ok = ?INTERFACE:detach(P1,Ref), - ok = ?INTERFACE:detach(P1,Ref), - - case ?INTERFACE of - ose -> ok; - _ -> - ok = ?INTERFACE:close(P1) - end, - - ok = ?INTERFACE:close(P2), - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,detach,[P1,Ref],_}|_]}} = - (catch ?INTERFACE:detach(P1,Ref)), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -send_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - {'EXIT',{badarg,[{?INTERFACE,send,[inval,P2Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(inval,P2Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,inval,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,inval,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,inval,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,inval,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,42,inval],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,42,inval)), - - ok = ?INTERFACE:close(P2), - ok = ?INTERFACE:send(P1,P2Id,42,"hello"), - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,42,"hello")), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -send_w_s_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P1Id = ?INTERFACE:get_id(P1), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - P3 = ?INTERFACE:open("p3"), - P3Id = ?INTERFACE:get_id(P3), - - {'EXIT',{badarg,[{?INTERFACE,send,[inval,P2Id,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(inval,P2Id,P1Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,-1,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,-1,P1Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,1 bsl 32,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,1 bsl 32,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,P1Id,inval,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,P1Id,inval,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,P1Id,42,inval],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,P1Id,42,inval)), - - ok = ?INTERFACE:close(P3), - ok = ?INTERFACE:send(P2,P3Id,P1Id,42,"hello"), - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:send(P2,P2Id,P1Id,42,"hello"), - ok = ?INTERFACE:close(P2), - - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,P1Id,42,"hello")), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -listen_errors(_Config) -> - - P1 = ?INTERFACE:open("p1"), - P1Id = ?INTERFACE:get_id(P1), - - {'EXIT',{badarg,[{?INTERFACE,listen,[inval,[42]],_}|_]}} = - (catch ?INTERFACE:listen(inval,[42])), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,inval],_}|_]}} = - (catch ?INTERFACE:listen(P1,inval)), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,[1 bsl 33]],_}|_]}} = - (catch ?INTERFACE:listen(P1,[1 bsl 33])), - - ok = ?INTERFACE:listen(P1,[42,42,42,42,42,42,42,42,42,42,42,42,42]), - - case ?INTERFACE of - ose -> ok; - _ -> - ?INTERFACE:send(P1,P1Id,42,"hello"), - timer:sleep(50), - ?INTERFACE:listen(P1,[]), - ?INTERFACE:send(P1,P1Id,42,"hello2"), - - receive - {message,P1,42,"hello"} -> ok - end, - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end - end, - - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,[42]],_}|_]}} = - (catch ?INTERFACE:listen(P1,[42])), - - ok. - -%% -%% Internal functions -%% -multi_open(N,ListenNums) -> - multi_open(N,ListenNums,[]). - -multi_open(0,_,Acc) -> - Acc; -multi_open(N,ListenNums,Acc) -> - P = ?INTERFACE:open("p"++integer_to_list(N)), - ok = ?INTERFACE:listen(P,ListenNums), - multi_open(N-1,ListenNums,[P|Acc]). - -n(_F,0) -> - ok; -n(F,N) -> - ok = F(N), - n(F,N-1). - - -flush() -> - receive - Msg -> - [Msg|flush()] - after 0 -> - [] - end. diff --git a/lib/ose/vsn.mk b/lib/ose/vsn.mk deleted file mode 100644 index fb1cf8219f..0000000000 --- a/lib/ose/vsn.mk +++ /dev/null @@ -1 +0,0 @@ -OSE_VSN = 1.1 diff --git a/lib/runtime_tools/c_src/Makefile.in b/lib/runtime_tools/c_src/Makefile.in index 448b8c62c2..aeacee0655 100644 --- a/lib/runtime_tools/c_src/Makefile.in +++ b/lib/runtime_tools/c_src/Makefile.in @@ -102,12 +102,7 @@ endif _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) debug opt valgrind: $(SOLIBS) $(OBJDIR) $(LIBDIR) $(NIF_LIB) -else -# We do not build this on OSE -debug opt valgrind: -endif DYNTRACE_OBJS = $(before_DTrace_OBJS) @@ -159,10 +154,8 @@ include $(ERL_TOP)/make/otp_release_targets.mk release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/obj" $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(DYNTRACE_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(NIF_LIB) $(SOLIBS) "$(RELSYSDIR)/priv/lib" -endif release_docs_spec: diff --git a/lib/stdlib/src/slave.erl b/lib/stdlib/src/slave.erl index 24fc8ce204..4e629a5e56 100644 --- a/lib/stdlib/src/slave.erl +++ b/lib/stdlib/src/slave.erl @@ -289,10 +289,7 @@ register_unique_name(Number) -> %% no need to use rsh. mk_cmd(Host, Name, Args, Waiter, Prog0) -> - Prog = case os:type() of - {ose,_} -> mk_ose_prog(Prog0); - _ -> quote_progname(Prog0) - end, + Prog = quote_progname(Prog0), BasicCmd = lists:concat([Prog, " -detached -noinput -master ", node(), " ", long_or_short(), Name, "@", Host, @@ -312,24 +309,6 @@ mk_cmd(Host, Name, Args, Waiter, Prog0) -> end end. -%% On OSE we have to pass the beam arguments directory to the slave -%% process. To find out what arguments that should be passed on we -%% make an assumption. All arguments after the last "--" should be -%% skipped. So given these arguments: -%% -Muycs256 -A 1 -- -root /mst/ -progname beam.debug.smp -- -home /mst/ -- -kernel inetrc '"/mst/inetrc.conf"' -- -name test@localhost -%% we send -%% -Muycs256 -A 1 -- -root /mst/ -progname beam.debug.smp -- -home /mst/ -- -kernel inetrc '"/mst/inetrc.conf"' -- -%% to the slave with whatever other args that are added in mk_cmd. -mk_ose_prog(Prog) -> - SkipTail = fun("--",[]) -> - ["--"]; - (_,[]) -> - []; - (Arg,Args) -> - [Arg," "|Args] - end, - [Prog,tl(lists:foldr(SkipTail,[],erlang:system_info(emu_args)))]. - %% This is an attempt to distinguish between spaces in the program %% path and spaces that separate arguments. The program is quoted to %% allow spaces in the path. diff --git a/lib/stdlib/test/filename_SUITE.erl b/lib/stdlib/test/filename_SUITE.erl index fd47da8150..4372e77df9 100644 --- a/lib/stdlib/test/filename_SUITE.erl +++ b/lib/stdlib/test/filename_SUITE.erl @@ -97,20 +97,11 @@ absname(Config) when is_list(Config) -> ?line file:set_cwd(Cwd), ok; - Type -> - case Type of - {unix, _} -> - ?line ok = file:set_cwd("/usr"), - ?line "/usr/foo" = filename:absname(foo), - ?line "/usr/foo" = filename:absname("foo"), - ?line "/usr/../ebin" = filename:absname("../ebin"); - {ose, _} -> - ?line ok = file:set_cwd("/romfs"), - ?line "/romfs/foo" = filename:absname(foo), - ?line "/romfs/foo" = filename:absname("foo"), - ?line "/romfs/../ebin" = filename:absname("../ebin") - end, - + {unix, _} -> + ?line ok = file:set_cwd("/usr"), + ?line "/usr/foo" = filename:absname(foo), + ?line "/usr/foo" = filename:absname("foo"), + ?line "/usr/../ebin" = filename:absname("../ebin"), ?line file:set_cwd("/"), ?line "/foo" = filename:absname(foo), ?line "/foo" = filename:absname("foo"), @@ -494,18 +485,10 @@ absname_bin(Config) when is_list(Config) -> ?line file:set_cwd(Cwd), ok; - Type -> - case Type of - {unix,_} -> - ?line ok = file:set_cwd(<<"/usr">>), - ?line <<"/usr/foo">> = filename:absname(<<"foo">>), - ?line <<"/usr/../ebin">> = filename:absname(<<"../ebin">>); - {ose,_} -> - ?line ok = file:set_cwd(<<"/romfs">>), - ?line <<"/romfs/foo">> = filename:absname(<<"foo">>), - ?line <<"/romfs/../ebin">> = filename:absname(<<"../ebin">>) - end, - + {unix, _} -> + ?line ok = file:set_cwd(<<"/usr">>), + ?line <<"/usr/foo">> = filename:absname(<<"foo">>), + ?line <<"/usr/../ebin">> = filename:absname(<<"../ebin">>), ?line file:set_cwd(<<"/">>), ?line <<"/foo">> = filename:absname(<<"foo">>), ?line <<"/../ebin">> = filename:absname(<<"../ebin">>), diff --git a/lib/tools/c_src/Makefile.in b/lib/tools/c_src/Makefile.in index 66bba229f6..e8bce149b1 100644 --- a/lib/tools/c_src/Makefile.in +++ b/lib/tools/c_src/Makefile.in @@ -97,11 +97,8 @@ DRIVERS= ifneq ($(strip $(ETHR_LIB_NAME)),) # Need ethread package for emem -ifneq ($(findstring ose,$(TARGET)),ose) -# Do not build on OSE PROGS += $(BIN_DIR)/emem$(TYPEMARKER)@EXEEXT@ endif -endif EMEM_OBJ_DIR=$(OBJ_DIR)/emem CREATE_DIRS += $(EMEM_OBJ_DIR) @@ -152,12 +149,7 @@ ERTS_LIB = $(ERL_TOP/erts/lib_src/obj/$(TARGET)/$(TYPE)/MADE _create_dirs := $(shell mkdir -p $(CREATE_DIRS)) -ifneq ($(findstring ose,$(TARGET)),ose) all: $(PROGS) $(DRIVERS) -else -# Do not build dynamic files on OSE -all: -endif $(ERTS_LIB): $(make_verbose)cd $(ERL_TOP)/erts/lib_src && $(MAKE) $(TYPE) diff --git a/make/ose_lm.mk.in b/make/ose_lm.mk.in deleted file mode 100644 index de8d351af3..0000000000 --- a/make/ose_lm.mk.in +++ /dev/null @@ -1,76 +0,0 @@ -#-*-makefile-*- ; force emacs to enter makefile-mode -# ---------------------------------------------------- -# Template target for generating an OSE5 load module -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 2013. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -# Author: Petre Pircalabu -# ---------------------------------------------------- - -# ---------------------------------------------------- -# build-ose-load-module -# Creates an OSE5 load module -# params: -# $(1) - The output target -# $(2) - Objects -# $(3) - Libraries -# $(4) - LM configuration file -# ---------------------------------------------------- - -ifeq ($(findstring ose,$(TARGET)),ose) -LDR1FLAGS = @erl_xcomp_ose_ldflags_pass1@ -LDR2FLAGS = @erl_xcomp_ose_ldflags_pass2@ -OSEROOT = @erl_xcomp_ose_OSEROOT@ -LCF = @erl_xcomp_ose_LM_LCF@ -BEAM_LMCONF = @erl_xcomp_ose_BEAM_LM_CONF@ -EPMD_LMCONF = @erl_xcomp_ose_EPMD_LM_CONF@ -RUN_ERL_LMCONF = @erl_xcomp_ose_RUN_ERL_LM_CONF@ -STRIP = @erl_xcomp_ose_STRIP@ -LM_POST_LINK = @erl_xcomp_ose_LM_POST_LINK@ -LM_SET_CONF = @erl_xcomp_ose_LM_SET_CONF@ -LM_ELF_SIZE = @erl_xcomp_ose_LM_ELF_SIZE@ -OSE_CONFD = @erl_xcomp_ose_CONFD@ -CRT0_LM = @erl_xcomp_ose_CRT0_LM@ -endif - -define build-ose-load-module - @echo " --- Linking $(1)" - - @echo " --- Linking $(1) (pass 1)" - $(ld_verbose)$(PURIFY) $(LD) -o $(1)_unconfigured_ro -r \ - $(2) --start-group $(3) --end-group --cref --discard-none -M > $(1)_1.map - - @echo " --- Linking $(1) (pass 2)" - $(ld_verbose)$(PURIFY) $(LD) -o $(1)_unconfigured \ - $(1)_unconfigured_ro -T $(LCF) -n --emit-relocs -e crt0_lm --cref \ - --discard-none -M > $(1)_2.map - - @echo " --- Inserting configuration" - $(ld_verbose) $(LM_SET_CONF) $(1)_unconfigured < $(4) - - @echo " --- Striping $(1)" -# $(ld_verbose) $(STRIP) $(1)_unconfigured - - @echo " --- Postlinking $(1)" - $(ld_verbose) $(LM_POST_LINK) $(1)_unconfigured - - @echo " --- Sizing $(1)" - $(ld_verbose) $(LM_ELF_SIZE) $(1)_unconfigured - mv $(1)_unconfigured $(1) -endef diff --git a/make/otp.mk.in b/make/otp.mk.in index 723f83cb45..c05c499d66 100644 --- a/make/otp.mk.in +++ b/make/otp.mk.in @@ -90,14 +90,10 @@ OTP_RELEASE = @OTP_RELEASE@ # Erlang language section # ---------------------------------------------------- EMULATOR = beam -ifeq ($(findstring ose_ppc750,$(TARGET)),ose_ppc750) -ERL_COMPILE_FLAGS += +compressed +ifdef BOOTSTRAP + ERL_COMPILE_FLAGS += +slim else - ifdef BOOTSTRAP - ERL_COMPILE_FLAGS += +slim - else - ERL_COMPILE_FLAGS += +debug_info - endif + ERL_COMPILE_FLAGS += +debug_info endif ERLC_WFLAGS = -W ERLC = erlc $(ERLC_WFLAGS) $(ERLC_FLAGS) diff --git a/xcomp/erl-xcomp-powerpc-ose5.conf b/xcomp/erl-xcomp-powerpc-ose5.conf deleted file mode 100644 index 88b2135593..0000000000 --- a/xcomp/erl-xcomp-powerpc-ose5.conf +++ /dev/null @@ -1,358 +0,0 @@ -## -*-shell-script-*- -## -## %CopyrightBegin% -## -## Copyright Ericsson AB 2009-2012. All Rights Reserved. -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## -## %CopyrightEnd% -## -## File: erl-xcomp-sfk-linux-ose5.conf -## Author: Petre Pircalabu -## -## ----------------------------------------------------------------------------- -## When cross compiling Erlang/OTP using `otp_build', copy this file and set -## the variables needed below. Then pass the path to the copy of this file as -## an argument to `otp_build' in the configure stage: -## `otp_build configure --xcomp-conf=<FILE>' -## ----------------------------------------------------------------------------- - -## Note that you cannot define arbitrary variables in a cross compilation -## configuration file. Only the ones listed below will be guaranteed to be -## visible throughout the whole execution of all `configure' scripts. Other -## variables needs to be defined as arguments to `configure' or exported in -## the environment. - -## -- Variables needed for an OSE5 build --------------------------------------- -OSEROOT="/vobs/ose5/system" -HOST="linux" - -GCCVERSION="4.4.3" -GCCROOT="${OSEROOT}/gcc_linux_powerpc_${GCCVERSION}" - -OSEDEBUG="no" -OSESSL="no" - -case ${GCCVERSION} in -4.4.3) - GCCTARGET="powerpc-eabi" - ;; -4.6.3) - GCCTARGET="powerpc-ose-eabi" - ;; -*) - echo "Error: Unknown GCCVERSION: ${GCCVERSION}" - exit 1 -esac - -if [ ${OSEDEBUG} != "yes" ]; -then -OPT_LEVEL="-O2" -else -OPT_LEVEL="" -fi - -if [ ${OSESSL} = "yes" ]; -then -## If your crypto is not in OSEROOT then you have to use --with-ssl to -## point to the correct place. Also CRYPTO_LIB_PATH has to be modified to -## point there as well. -CRYPTO_CONFIG_OPTION="--disable-dynamic-ssl-lib" -CRYPTO_NIF_PATH=",$ERL_TOP/lib/crypto/priv/lib/powerpc-unknown-ose/crypto.a" -CRYPTO_LIB_PATH="${OSEROOT}/lib/powerpc/libsslcrypto.a" -else -CRYPTO_CONFIG_OPTION="--without-ssl" -CRYPTO_NIF_PATH="" -CRYPTO_LIB_PATH="" -fi - - -## -- Variables for `otp_build' Only ------------------------------------------- - -## Variables in this section are only used, when configuring Erlang/OTP for -## cross compilation using `$ERL_TOP/otp_build configure'. - -## *NOTE*! These variables currently have *no* effect if you configure using -## the `configure' script directly. - -# * `erl_xcomp_build' - The build system used. This value will be passed as -# `--build=$erl_xcomp_build' argument to the `configure' script. It does -# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full -# `CPU-VENDOR-OS' triplet will be created by -# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess', -# the build system will be guessed using -# `$ERL_TOP/erts/autoconf/config.guess'. -erl_xcomp_build=guess - -# * `erl_xcomp_host' - Cross host/target system to build for. This value will -# be passed as `--host=$erl_xcomp_host' argument to the `configure' script. -# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The -# full `CPU-VENDOR-OS' triplet will be created by -# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'. -erl_xcomp_host="powerpc-ose" - -disabled_apps="--without-erl_interface --without-os_mon --without-megaco --without-observer --without-wx --without-appmon --without-cosEvent --without-cosEventDomain --without-cosFileTransfer --without-cosNotification --without-cosProperty --without-cosTime --without-cosTransactions --without-debugger --without-dialyzer --without-edoc --without-erl_docgen --without-eunit --without-gs --without-hipe --without-ic --without-orber --without-pman --without-toolbar --without-tv --without-webtool --without-typer" - -# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the -# `configure' script. -erl_xcomp_configure_flags="${CRYPTO_CONFIG_OPTION} --disable-kernel-poll --disable-hipe --without-termcap --without-javac ${disabled_apps} --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a${CRYPTO_NIF_PATH}" - -## -- Cross Compiler and Other Tools ------------------------------------------- - -## If the cross compilation tools are prefixed by `<HOST>-' you probably do -## not need to set these variables (where `<HOST>' is what has been passed as -## `--host=<HOST>' argument to `configure'). - -## All variables in this section can also be used when native compiling. - -# * `CC' - C compiler. -CC="$GCCROOT/bin/$GCCTARGET-gcc" - -# * `CFLAGS' - C compiler flags. -CFLAGS="-msoft-float -g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -mpowerpc -nostdlib -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DBIG_ENDIAN -DCF_CONF_SIZE=0x800 ${OPT_LEVEL}" - - -# * `STATIC_CFLAGS' - Static C compiler flags. -#STATIC_CFLAGS= - -# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library -# search path for the shared libraries. Note that this actually is a -# linker flag, but it needs to be passed via the compiler. -#CFLAG_RUNTIME_LIBRARY_PATH= - -# * `CPP' - C pre-processor. -CPP="$GCCROOT/bin/$GCCTARGET-cpp" - -# * `CPPFLAGS' - C pre-processor flags. -CPPFLAGS="-msoft-float -g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -mpowerpc -nostdlib -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DBIG_ENDIAN -DCF_CONF_SIZE=0x800 ${OPT_LEVEL}" - - -# * `CXX' - C++ compiler. -CXX="$GCCROOT/bin/$GCCTARGET-g++" - -# * `CXXFLAGS' - C++ compiler flags. -CXXFLAGS="-msoft-float -g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc ${OPT_LEVEL}" - -# * `LD' - Linker. -LD="${GCCROOT}/bin/${GCCTARGET}-ld" - -# * `LDFLAGS' - Linker flags. -LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,${ERL_TOP}/erts/emulator/sys/ose/gcc_${GCCVERSION}_lm_ppc.lcf" - -# * `LIBS' - Libraries. -LIBS="${OSEROOT}/lib/powerpc/libcrt.a ${OSEROOT}/lib/powerpc/libm.a ${GCCROOT}/lib/gcc/${GCCTARGET}/${GCCVERSION}/nof/libgcc.a ${CRYPTO_LIB_PATH}" - -## -- *D*ynamic *E*rlang *D*river Linking -- - -## *NOTE*! Either set all or none of the `DED_LD*' variables. - -# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers. -DED_LD= - -# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'. -DED_LDFLAGS= - -# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library -# search path for shared libraries when linking with `DED_LD'. -DED_LD_FLAG_RUNTIME_LIBRARY_PATH= - -## -- Large File Support -- - -## *NOTE*! Either set all or none of the `LFS_*' variables. - -# * `LFS_CFLAGS' - Large file support C compiler flags. -#LFS_CFLAGS= - -# * `LFS_LDFLAGS' - Large file support linker flags. -#LFS_LDFLAGS= - -# * `LFS_LIBS' - Large file support libraries. -#LFS_LIBS= - -## -- Other Tools -- - -# * `RANLIB' - `ranlib' archive index tool. -RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib" - -# * `AR' - `ar' archiving tool. -AR="$GCCROOT/bin/$GCCTARGET-ar" - -# * `STRIP' - `strip -STRIP="$GCCROOT/bin/$GCCTARGET-strip" - -# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is -# currently used for finding out large file support flags to use, and -# on Linux systems for finding out if we have an NPTL thread library or -# not. -#GETCONF= - -## -- Cross System Root Locations ---------------------------------------------- - -# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross -# compilation environment. Currently, the `crypto', `odbc', `ssh' and -# `ssl' applications need the system root. These applications will be -# skipped if the system root has not been set. The system root might be -# needed for other things too. If this is the case and the system root -# has not been set, `configure' will fail and request you to set it. -erl_xcomp_sysroot="$OSEROOT" - -# * `erl_xcomp_isysroot' - The absolute path to the system root for includes -# of the cross compilation environment. If not set, this value defaults -# to `$erl_xcomp_sysroot', i.e., only set this value if the include system -# root path is not the same as the system root path. -#erl_xcomp_isysroot="$OSEROOT" - -## -- Optional Feature, and Bug Tests ------------------------------------------ - -## These tests cannot (always) be done automatically when cross compiling. You -## usually do not need to set these variables. Only set these if you really -## know what you are doing. - -## Note that some of these values will override results of tests performed -## by `configure', and some will not be used until `configure' is sure that -## it cannot figure the result out. - -## The `configure' script will issue a warning when a default value is used. -## When a variable has been set, no warning will be issued. - -# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `__after_morecore_hook' that can be -# used for tracking used `malloc()' implementations core memory usage. -# This is currently only used by unsupported features. -#erl_xcomp_after_morecore_hook= - -# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system -# must be big endian. If `no', little endian. This can often be -# automatically detected, but not always. If not automatically detected, -# `configure' will fail unless this variable is set. Since no default -# value is used, `configure' will try to figure this out automatically. -#erl_xcomp_bigendian= - -# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the -# target system must have doubles in "middle-endian" format. If -# `no`, it has "regular" endianness. This can often be automatically -# detected, but not always. If not automatically detected, -# `configure` will fail unless this variable is set. Since no -# default value is used, `configure` will try to figure this out -# automatically. -#erl_xcomp_double_middle_endian - -# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `clock_gettime()' implementation -# that can be used for retrieving process CPU time. -#erl_xcomp_clock_gettime_cpu_time= - -# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a working `getaddrinfo()' implementation that can -# handle both IPv4 and IPv6. -#erl_xcomp_getaddrinfo= - -# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `gethrvtime()' implementation and -# is used with procfs `ioctl()'. -#erl_xcomp_gethrvtime_procfs_ioctl= - -# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the -# target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation -# that can be used on `brk' and `sbrk' symbols used by the `malloc()' -# implementation in use, and by this track the `malloc()' implementations -# core memory usage. This is currently only used by unsupported features. -#erl_xcomp_dlsym_brk_wrappers= - -# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a working `kqueue()' implementation that returns a file -# descriptor which can be used by `poll()' and/or `select()'. If `no' and -# the target system has not got `epoll()' or `/dev/poll', the kernel-poll -# feature will be disabled. -#erl_xcomp_kqueue= - -# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on -# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on -# the target system must work. This variable is recommended to be set to -# `no' on Linux systems with kernel versions less than 2.6. -#erl_xcomp_linux_clock_gettime_correction= - -# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise, -# `no'. If `yes', the target system must have NPTL (Native POSIX Thread -# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux -# kernel versions typically less than 2.6). -#erl_xcomp_linux_nptl= - -# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux; -# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target -# system. `sigaltstack()' on Linux kernel versions less than 2.4 are -# broken. -#erl_xcomp_linux_usable_sigaltstack= - -# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes', -# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old -# LinuxThreads thread libraries (Linux kernel versions typically less than -# 2.2) used these signals and made them unusable by the ERTS. -#erl_xcomp_linux_usable_sigusrx= - -# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise, -# `yes'. If `yes', the target system must have a working `poll()' -# implementation that also can handle devices. If `no', `select()' will be -# used instead of `poll()'. -erl_xcomp_poll=no - -# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a `putenv()' implementation that stores a copy of the -# key/value pair. -#erl_xcomp_putenv_copy= - -# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have reliable floating point exceptions. -#erl_xcomp_reliable_fpe= -# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1) -erl_xcomp_ose_ldflags_pass1="-r --no-omagic" - -# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2) -erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic" - -# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory -erl_xcomp_ose_OSEROOT="${OSEROOT}" - -# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution -erl_xcomp_ose_STRIP="${GCCROOT}/bin/${GCCTARGET}-strip" - -# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool -erl_xcomp_ose_LM_POST_LINK="${OSEROOT}/bin/${HOST}/lm_post_link" - -# * `erl_xcomp_ose_LM_SET_CONF` - Sets the configuration for an OSE load module -erl_xcomp_ose_LM_SET_CONF="${OSEROOT}/bin/${HOST}/lm_set_conf" - -# * `erl_xcomp_ose_LM_ELF_SIZE` - OSE load module elf size tool -erl_xcomp_ose_LM_ELF_SIZE="${OSEROOT}/bin/${HOST}/lm_elf_size" - -# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file -erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_${GCCVERSION}_lm_ppc.lcf" - -# * `erl_xcomp_ose_BEAM_LM_CONF` - beam OSE load module configuration file -erl_xcomp_ose_BEAM_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/beam.lmconf" - -# * `erl_xcomp_ose_RUN_ERL_LM_CONF` - run_erl_lm OSE load module configuration file -erl_xcomp_ose_RUN_ERL_LM_CONF="${ERL_TOP}/erts/etc/ose/etc.lmconf" - -# * `erl_xcomp_ose_EPMD_LM_CONF` - epmd OSE load module configuration file -erl_xcomp_ose_EPMD_LM_CONF="${ERL_TOP}/erts/etc/ose/etc.lmconf" - -# * `erl_xcomp_ose_CONFD` - OSE confd source file -erl_xcomp_ose_CONFD="${OSEROOT}/src/ose_confd.c" - -# * `erl_xcomp_ose_CRT0_LM` - OSE crt0 lm source file -erl_xcomp_ose_CRT0_LM="${OSEROOT}/src/crt0_lm.c" - - -## ----------------------------------------------------------------------------- diff --git a/xcomp/erl-xcomp-sfk-linux-ose5.conf b/xcomp/erl-xcomp-sfk-linux-ose5.conf deleted file mode 100644 index a4d64e5636..0000000000 --- a/xcomp/erl-xcomp-sfk-linux-ose5.conf +++ /dev/null @@ -1,305 +0,0 @@ -## -*-shell-script-*- -## -## %CopyrightBegin% -## -## Copyright Ericsson AB 2009-2012. All Rights Reserved. -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## -## %CopyrightEnd% -## -## File: erl-xcomp-sfk-linux-ose5.conf -## Author: Petre Pircalabu -## -## ----------------------------------------------------------------------------- -## When cross compiling Erlang/OTP using `otp_build', copy this file and set -## the variables needed below. Then pass the path to the copy of this file as -## an argument to `otp_build' in the configure stage: -## `otp_build configure --xcomp-conf=<FILE>' -## ----------------------------------------------------------------------------- - -## Note that you cannot define arbitrary variables in a cross compilation -## configuration file. Only the ones listed below will be guaranteed to be -## visible throughout the whole execution of all `configure' scripts. Other -## variables needs to be defined as arguments to `configure' or exported in -## the environment. - -## -- Variables needed for an OSE5 build --------------------------------------- -OSEROOT="/vobs/ose5/system" -HOST="linux" -GCCVERSION="4.6.3" -GCCROOT="${OSEROOT}/gcc_linux_x86_${GCCVERSION}" -GCCTARGET="i386-elf" - -## -- Variables for `otp_build' Only ------------------------------------------- - -## Variables in this section are only used, when configuring Erlang/OTP for -## cross compilation using `$ERL_TOP/otp_build configure'. - -## *NOTE*! These variables currently have *no* effect if you configure using -## the `configure' script directly. - -# * `erl_xcomp_build' - The build system used. This value will be passed as -# `--build=$erl_xcomp_build' argument to the `configure' script. It does -# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full -# `CPU-VENDOR-OS' triplet will be created by -# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess', -# the build system will be guessed using -# `$ERL_TOP/erts/autoconf/config.guess'. -erl_xcomp_build=guess - -# * `erl_xcomp_host' - Cross host/target system to build for. This value will -# be passed as `--host=$erl_xcomp_host' argument to the `configure' script. -# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The -# full `CPU-VENDOR-OS' triplet will be created by -# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'. -erl_xcomp_host="$GCCTARGET-ose" - -# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the -# `configure' script. -erl_xcomp_configure_flags="--disable-threads --disable-smp-support --disable-kernel-poll --disable-hipe --without-termcap --without-javac --disable-dynamic-ssl-lib --disable-shared-zlib --without-ssl --enable-static-nifs --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a" - -## -- Cross Compiler and Other Tools ------------------------------------------- - -## If the cross compilation tools are prefixed by `<HOST>-' you probably do -## not need to set these variables (where `<HOST>' is what has been passed as -## `--host=<HOST>' argument to `configure'). - -## All variables in this section can also be used when native compiling. - -# * `CC' - C compiler. -CC="$GCCROOT/bin/$GCCTARGET-gcc" - -# * `CFLAGS' - C compiler flags. -CFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800" - -# * `STATIC_CFLAGS' - Static C compiler flags. -#STATIC_CFLAGS= - -# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library -# search path for the shared libraries. Note that this actually is a -# linker flag, but it needs to be passed via the compiler. -#CFLAG_RUNTIME_LIBRARY_PATH= - -# * `CPP' - C pre-processor. -#CPP= - -# * `CPPFLAGS' - C pre-processor flags. -CPPFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800" - -# * `CXX' - C++ compiler. -#CXX= - -# * `CXXFLAGS' - C++ compiler flags. -CXXFLAGS="-g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc " - -# * `LD' - Linker. -LD="$GCCROOT/bin/$GCCTARGET-ld" - -# * `LDFLAGS' - Linker flags. -LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,$ERL_TOP/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf" - -# * `LIBS' - Libraries. -LIBS="$OSEROOT/lib/x86/libcrt.a $OSEROOT/lib/x86/libm.a $GCCROOT/lib/gcc/$GCCTARGET/$GCCVERSION/libgcc.a" - -## -- *D*ynamic *E*rlang *D*river Linking -- - -## *NOTE*! Either set all or none of the `DED_LD*' variables. - -# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers. -#DED_LD= - -# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'. -#DED_LDFLAGS= - -# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library -# search path for shared libraries when linking with `DED_LD'. -#DED_LD_FLAG_RUNTIME_LIBRARY_PATH= - -## -- Large File Support -- - -## *NOTE*! Either set all or none of the `LFS_*' variables. - -# * `LFS_CFLAGS' - Large file support C compiler flags. -#LFS_CFLAGS= - -# * `LFS_LDFLAGS' - Large file support linker flags. -#LFS_LDFLAGS= - -# * `LFS_LIBS' - Large file support libraries. -#LFS_LIBS= - -## -- Other Tools -- - -# * `RANLIB' - `ranlib' archive index tool. -RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib" - -# * `AR' - `ar' archiving tool. -AR="$GCCROOT/bin/$GCCTARGET-ar" - -# * `STRIP' - `strip -STRIP="$GCCROOT/bin/$GCCTARGET-strip" - -# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is -# currently used for finding out large file support flags to use, and -# on Linux systems for finding out if we have an NPTL thread library or -# not. -#GETCONF= - -## -- Cross System Root Locations ---------------------------------------------- - -# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross -# compilation environment. Currently, the `crypto', `odbc', `ssh' and -# `ssl' applications need the system root. These applications will be -# skipped if the system root has not been set. The system root might be -# needed for other things too. If this is the case and the system root -# has not been set, `configure' will fail and request you to set it. -erl_xcomp_sysroot="$OSEROOT" - -# * `erl_xcomp_isysroot' - The absolute path to the system root for includes -# of the cross compilation environment. If not set, this value defaults -# to `$erl_xcomp_sysroot', i.e., only set this value if the include system -# root path is not the same as the system root path. -erl_xcomp_isysroot="$OSEROOT/include" - -## -- Optional Feature, and Bug Tests ------------------------------------------ - -## These tests cannot (always) be done automatically when cross compiling. You -## usually do not need to set these variables. Only set these if you really -## know what you are doing. - -## Note that some of these values will override results of tests performed -## by `configure', and some will not be used until `configure' is sure that -## it cannot figure the result out. - -## The `configure' script will issue a warning when a default value is used. -## When a variable has been set, no warning will be issued. - -# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `__after_morecore_hook' that can be -# used for tracking used `malloc()' implementations core memory usage. -# This is currently only used by unsupported features. -#erl_xcomp_after_morecore_hook= - -# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system -# must be big endian. If `no', little endian. This can often be -# automatically detected, but not always. If not automatically detected, -# `configure' will fail unless this variable is set. Since no default -# value is used, `configure' will try to figure this out automatically. -#erl_xcomp_bigendian= - -# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the -# target system must have doubles in "middle-endian" format. If -# `no`, it has "regular" endianness. This can often be automatically -# detected, but not always. If not automatically detected, -# `configure` will fail unless this variable is set. Since no -# default value is used, `configure` will try to figure this out -# automatically. -#erl_xcomp_double_middle_endian - -# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `clock_gettime()' implementation -# that can be used for retrieving process CPU time. -#erl_xcomp_clock_gettime_cpu_time= - -# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a working `getaddrinfo()' implementation that can -# handle both IPv4 and IPv6. -#erl_xcomp_getaddrinfo= - -# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `gethrvtime()' implementation and -# is used with procfs `ioctl()'. -#erl_xcomp_gethrvtime_procfs_ioctl= - -# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the -# target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation -# that can be used on `brk' and `sbrk' symbols used by the `malloc()' -# implementation in use, and by this track the `malloc()' implementations -# core memory usage. This is currently only used by unsupported features. -#erl_xcomp_dlsym_brk_wrappers= - -# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a working `kqueue()' implementation that returns a file -# descriptor which can be used by `poll()' and/or `select()'. If `no' and -# the target system has not got `epoll()' or `/dev/poll', the kernel-poll -# feature will be disabled. -#erl_xcomp_kqueue= - -# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on -# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on -# the target system must work. This variable is recommended to be set to -# `no' on Linux systems with kernel versions less than 2.6. -#erl_xcomp_linux_clock_gettime_correction= - -# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise, -# `no'. If `yes', the target system must have NPTL (Native POSIX Thread -# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux -# kernel versions typically less than 2.6). -#erl_xcomp_linux_nptl= - -# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux; -# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target -# system. `sigaltstack()' on Linux kernel versions less than 2.4 are -# broken. -#erl_xcomp_linux_usable_sigaltstack= - -# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes', -# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old -# LinuxThreads thread libraries (Linux kernel versions typically less than -# 2.2) used these signals and made them unusable by the ERTS. -#erl_xcomp_linux_usable_sigusrx= - -# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise, -# `yes'. If `yes', the target system must have a working `poll()' -# implementation that also can handle devices. If `no', `select()' will be -# used instead of `poll()'. -erl_xcomp_poll=no - -# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a `putenv()' implementation that stores a copy of the -# key/value pair. -#erl_xcomp_putenv_copy= - -# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have reliable floating point exceptions. -#erl_xcomp_reliable_fpe= - -# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1) -erl_xcomp_ose_ldflags_pass1="-r --no-omagic" - -# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2) -erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic" - -# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory -erl_xcomp_ose_OSEROOT="$OSEROOT" - -# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution -erl_xcomp_ose_STRIP="$GCCROOT/bin/$GCCTARGET-strip" - -# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool -erl_xcomp_ose_LM_POST_LINK="$OSEROOT/bin/$HOST/lm_post_link" - -# * `erl_xcomp_ose_LM_SET_CONF` - OSE load module configuration tool -erl_xcomp_ose_LM_SET_CONF="$OSEROOT/bin/$HOST/lm_set_conf" - -# * `erl_xcomp_ose_LM_GET_CONF` - OSE load module elf size tool -erl_xcomp_ose_LM_ELF_SIZE="$OSEROOT/bin/$HOST/lm_elf_size" - -# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file -erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf" - -# * `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file -erl_xcomp_ose_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/default.lmconf" - -## ----------------------------------------------------------------------------- diff --git a/xcomp/erl-xcomp-vars.sh b/xcomp/erl-xcomp-vars.sh index 0443867341..e864f7b96b 100644 --- a/xcomp/erl-xcomp-vars.sh +++ b/xcomp/erl-xcomp-vars.sh @@ -27,4 +27,4 @@ # and precious variables in $ERL_TOP/erts/aclocal.m4. # -erl_xcomp_vars="erl_xcomp_sysroot erl_xcomp_isysroot erl_xcomp_bigendian erl_xcomp_double_middle_endian erl_xcomp_linux_clock_gettime_correction erl_xcomp_linux_nptl erl_xcomp_linux_usable_sigusrx erl_xcomp_linux_usable_sigaltstack erl_xcomp_poll erl_xcomp_kqueue erl_xcomp_putenv_copy erl_xcomp_reliable_fpe erl_xcomp_getaddrinfo erl_xcomp_gethrvtime_procfs_ioctl erl_xcomp_clock_gettime_cpu_time erl_xcomp_after_morecore_hook erl_xcomp_dlsym_brk_wrappers erl_xcomp_posix_memalign erl_xcomp_ose_ldflags_pass1 erl_xcomp_ose_ldflags_pass2 erl_xcomp_ose_OSEROOT erl_xcomp_ose_STRIP erl_xcomp_ose_LM_POST_LINK erl_xcomp_ose_LM_SET_CONF erl_xcomp_ose_LM_GET_CONF erl_xcomp_ose_LM_ELF_SIZE erl_xcomp_ose_LM_LCF erl_xcomp_ose_BEAM_LM_CONF erl_xcomp_ose_EPMD_LM_CONF erl_xcomp_ose_RUN_ERL_LM_CONF erl_xcomp_ose_CONFD erl_xcomp_ose_CRT0_LM" +erl_xcomp_vars="erl_xcomp_sysroot erl_xcomp_isysroot erl_xcomp_bigendian erl_xcomp_double_middle_endian erl_xcomp_linux_clock_gettime_correction erl_xcomp_linux_nptl erl_xcomp_linux_usable_sigusrx erl_xcomp_linux_usable_sigaltstack erl_xcomp_poll erl_xcomp_kqueue erl_xcomp_putenv_copy erl_xcomp_reliable_fpe erl_xcomp_getaddrinfo erl_xcomp_gethrvtime_procfs_ioctl erl_xcomp_clock_gettime_cpu_time erl_xcomp_after_morecore_hook erl_xcomp_dlsym_brk_wrappers erl_xcomp_posix_memalign" |