Revert "Prepare release"

This reverts commit a0e362765d9d4afb0211f49eb787d2139b3eb7be.

1 files changed, 0 insertions, 207 deletions

diff --git a/erts/doc/src/notes.xml b/erts/doc/src/notes.xml
index de6696671b..e996d3e8e3 100644
--- a/erts/doc/src/notes.xml
+++ b/erts/doc/src/notes.xml
@@ -30,213 +30,6 @@
   </header>
   <p>This document describes the changes made to the ERTS application.</p>
 
-<section><title>Erts 5.10</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Set new peeled off SCTP socket to nonblocking socket
-	    (Thanks to Jonas Falkevik)</p>
-          <p>
-	    Own Id: OTP-10491</p>
-        </item>
-        <item>
-          <p>
-	    Fix various typos (thanks to Tuncer Ayaz)</p>
-          <p>
-	    Own Id: OTP-10611</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    A boolean socket option 'ipv6_v6only' for IPv6 sockets
-	    has been added. The default value of the option is OS
-	    dependent, so applications aiming to be portable should
-	    consider using <c>{ipv6_v6only,true}</c> when creating an
-	    <c>inet6</c> listening/destination socket, and if
-	    neccesary also create an <c>inet</c> socket on the same
-	    port for IPv4 traffic. See the documentation.</p>
-          <p>
-	    Own Id: OTP-8928 Aux Id: kunagi-193 [104] </p>
-        </item>
-        <item>
-	    <p>It is now allowed to define stubs for BIFs, to allow
-	    type specs to be written for BIFs. For example, if there
-	    is BIF called <c>lists:member/2</c>, a dummy definition
-	    of <c>lists:member/2</c> is now allowed.</p>
-          <p>
-	    Own Id: OTP-9861</p>
-        </item>
-        <item>
-          <p>
-	    Code loading and upgrade are now done without blocking
-	    the emulator in single threaded mode. This will improve
-	    realtime characteristics when code is loaded/upgraded on
-	    a running SMP system.</p>
-          <p>
-	    Own Id: OTP-9974</p>
-        </item>
-        <item>
-	    <p>In the SMP emulator, turning on and off tracing will
-	    no longer take down the system to single-scheduling. </p>
-          <p>
-	    Own Id: OTP-10122</p>
-        </item>
-        <item>
-          <p>
-	    Tuple funs (deprecated in R15B) are no longer supported.</p>
-          <p>
-	    *** POTENTIAL INCOMPATIBILITY ***</p>
-          <p>
-	    Own Id: OTP-10170</p>
-        </item>
-        <item>
-	    <p>Major port improvements. The most notable:</p> <list>
-	    <item>New internal port table implementation allowing for
-	    both parallel reads as well as writes. Especially read
-	    operations have become really cheap.</item> <item>Dynamic
-	    allocation of port structures. This allow for a much
-	    larger maximum amount of ports allowed as a default. The
-	    previous default of 1024 has been raised to 65536.
-	    Maximum amount of ports can be set using the <seealso
-	    marker="erts:erl#+Q">+Q</seealso> command line flag of
-	    <seealso marker="erts:erl">erl(1)</seealso>. The
-	    previously used environment variable <c>ERL_MAX_PORTS</c>
-	    has been deprecated and scheduled for removal in
-	    OTP-R17.</item> <item>Major rewrite of scheduling of port
-	    tasks. Major benefits of the rewrite are reduced
-	    contention on run queue locks, and reduced amount of
-	    memory allocation operations needed. The rewrite was also
-	    necessary in order to make it possible to schedule
-	    signals from processes to ports.</item> <item>Improved
-	    internal thread progress functionality for easy
-	    management of unmanaged threads. This improvement was
-	    necessary for the rewrite of the port task
-	    scheduling.</item> <item>Rewrite of all process to port
-	    signal implementations in order to make it possible to
-	    schedule those operations. All port operations can now be
-	    scheduled which allows for reduced lock contention on the
-	    port lock as well as truly asynchronous communication
-	    with ports.</item> <item>Optimized lookup of port handles
-	    from drivers.</item> <item>Optimized driver lookup when
-	    creating ports.</item> <item>Preemptable <seealso
-	    marker="erts:erlang#ports-0">erlang:ports/0</seealso>
-	    BIF.</item> </list>
-	    <p>These changes imply changes of the characteristics of
-	    the system. The most notable:</p> <taglist> <tag>Order of
-	    signal delivery.</tag> <item>The previous implementation
-	    of the VM has delivered signals from processes to ports
-	    in a synchronous stricter fashion than required by the
-	    language. As of ERTS version 5.10, signals are truly
-	    asynchronously delivered. The order of signal delivery
-	    still adheres to the requirements of the language, but
-	    only to the requirements. That is, some signal sequences
-	    that previously always were delivered in one specific
-	    order may now from time to time be delivered in different
-	    orders. This may cause Erlang programs that have made
-	    <em>false assumptions</em> about signal delivery order to
-	    fail even though they previously succeeded. For more
-	    information about signal ordering guarantees, see the
-	    chapter on <seealso
-	    marker="erts:communication">communication</seealso> in
-	    the ERTS user's guide. The <seealso
-	    marker="erts:erl#+n">+n</seealso> command line flag of
-	    <seealso marker="erts:erl">erl(1)</seealso> can be
-	    helpful when trying to find signaling order bugs in
-	    Erlang code that have been exposed by these
-	    changes.</item> <tag>Latency of signals sent from
-	    processes to ports.</tag> <item>Signals from processes to
-	    ports where previously always delivered immediately. This
-	    kept latency for such communication to a minimum, but it
-	    could cause lock contention which was very expensive for
-	    the system as a whole. In order to keep this latency low
-	    also in the future, most signals from processes to ports
-	    are by default still delivered immediately as long as no
-	    conflicts occur. Such conflicts include not being able to
-	    acquire the port lock, but also include other conflicts.
-	    When a conflict occur, the signal will be scheduled for
-	    delivery at a later time. A scheduled signal delivery may
-	    cause a higher latency for this specific communication,
-	    but improves the overall performance of the system since
-	    it reduce lock contention between schedulers. The default
-	    behavior of only scheduling delivery of these signals on
-	    conflict can be changed by passing the <seealso
-	    marker="erts:erl#+spp">+spp</seealso> command line flag
-	    to <seealso marker="erts:erl">erl(1)</seealso>. The
-	    behavior can also be changed on port basis using the
-	    <seealso
-	    marker="erts:erlang#open_port_parallelism">parallelism</seealso>
-	    option of the <seealso
-	    marker="erts:erlang#open_port-2">open_port/2</seealso>
-	    BIF.</item> <tag>Execution time of the
-	    <c>erlang:ports/0</c> BIF.</tag> <item>Since <seealso
-	    marker="erts:erlang#ports-0">erlang:ports/0</seealso> now
-	    can be preempted, the responsiveness of the system as a
-	    whole has been improved. A call to <c>erlang:ports/0</c>
-	    may, however, take a much longer time to complete than
-	    before. How much longer time heavily depends on the
-	    system load.</item> </taglist>
-	    <p><em>Potential incompatibilities</em>:</p> <list>
-	    <item><c>driver_send_term()</c> has been deprecated and
-	    has been scheduled for removal in OTP-R17. Replace usage
-	    of <c>driver_send_term()</c> with usage of <seealso
-	    marker="erts:erl_driver#erl_drv_send_term">erl_drv_send_term()</seealso>.</item>
-	    <item><c>driver_output_term()</c> has been deprecated and
-	    has been scheduled for removal in OTP-R17. Replace usage
-	    of <c>driver_output_term()</c> with usage of <seealso
-	    marker="erts:erl_driver#erl_drv_output_term">erl_drv_output_term()</seealso>.</item>
-	    <item>The new function <seealso
-	    marker="erts:erl_driver#erl_drv_busy_msgq_limits">erl_drv_busy_msgq_limits()</seealso>
-	    has been added in order to able to control management of
-	    port queues.</item> </list>
-	    <p>The <seealso
-	    marker="erts:erl_driver#version_management">driver API
-	    version</seealso> has been bumped to 2.1 from 2.0 due to
-	    the above changes in the driver API.</p>
-          <p>
-	    *** POTENTIAL INCOMPATIBILITY ***</p>
-          <p>
-	    Own Id: OTP-10336 Aux Id: kunagi-138
-	    [b5b97f67-fe34-46dc-93e6-a2931576db12] </p>
-        </item>
-        <item>
-          <p>
-	    Erlang specification 4.7.3 defines max tuple size to
-	    65535 elements It is now enforced to no more than
-	    16777215 elements (arity 24 bits)</p>
-          <p>
-	    Previous edge cases (28 bits) were not validated and
-	    could cause undefined behaviour.</p>
-          <p>
-	    *** POTENTIAL INCOMPATIBILITY ***</p>
-          <p>
-	    Own Id: OTP-10633</p>
-        </item>
-        <item>
-          <p>
-	    The previous default of a maximum of 32768 simultaneous
-	    processes has been raised to 262144. This value can be
-	    changed using the the <seealso
-	    marker="erl#+P">+P</seealso> command line flag of
-	    <seealso marker="erl">erl(1)</seealso>. Note that the
-	    value passed now is considered as a hint, and that actual
-	    value chosen in most cases will be a power of two.</p>
-          <p>
-	    *** POTENTIAL INCOMPATIBILITY ***</p>
-          <p>
-	    Own Id: OTP-10647 Aux Id: OTP-10336 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
 <section><title>Erts 5.9.3.1</title>
 
     <section><title>Known Bugs and Problems</title>