aboutsummaryrefslogtreecommitdiffstats
path: root/erts/emulator/pcre/pcre_internal.h
diff options
context:
space:
mode:
authorErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
committerErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
commit84adefa331c4159d432d22840663c38f155cd4c1 (patch)
treebff9a9c66adda4df2106dfd0e5c053ab182a12bd /erts/emulator/pcre/pcre_internal.h
downloadotp-84adefa331c4159d432d22840663c38f155cd4c1.tar.gz
otp-84adefa331c4159d432d22840663c38f155cd4c1.tar.bz2
otp-84adefa331c4159d432d22840663c38f155cd4c1.zip
The R13B03 release.OTP_R13B03
Diffstat (limited to 'erts/emulator/pcre/pcre_internal.h')
-rw-r--r--erts/emulator/pcre/pcre_internal.h1136
1 files changed, 1136 insertions, 0 deletions
diff --git a/erts/emulator/pcre/pcre_internal.h b/erts/emulator/pcre/pcre_internal.h
new file mode 100644
index 0000000000..6aafabb0c9
--- /dev/null
+++ b/erts/emulator/pcre/pcre_internal.h
@@ -0,0 +1,1136 @@
+/*************************************************
+* Perl-Compatible Regular Expressions *
+*************************************************/
+
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+ Written by Philip Hazel
+ Copyright (c) 1997-2008 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of the University of Cambridge nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+/* This header contains definitions that are shared between the different
+modules, but which are not relevant to the exported API. This includes some
+functions whose names all begin with "_erts_pcre_". */
+
+/* %ExternalCopyright% */
+
+#ifndef PCRE_INTERNAL_H
+#define PCRE_INTERNAL_H
+
+#ifdef ERLANG_INTEGRATION
+#include "local_config.h"
+#endif
+
+/* Define DEBUG to get debugging output on stdout. */
+
+#if 0
+#define DEBUG
+#endif
+
+/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
+inline, and there are *still* stupid compilers about that don't like indented
+pre-processor statements, or at least there were when I first wrote this. After
+all, it had only been about 10 years then...
+
+It turns out that the Mac Debugging.h header also defines the macro DPRINTF, so
+be absolutely sure we get our version. */
+
+#undef DPRINTF
+#ifdef DEBUG
+#define DPRINTF(p) printf p
+#else
+#define DPRINTF(p) /* Nothing */
+#endif
+
+
+/* Standard C headers plus the external interface definition. The only time
+setjmp and stdarg are used is when NO_RECURSE is set. */
+
+#include <ctype.h>
+#include <limits.h>
+#include <setjmp.h>
+#include <stdarg.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/* When compiling a DLL for Windows, the exported symbols have to be declared
+using some MS magic. I found some useful information on this web page:
+http://msdn2.microsoft.com/en-us/library/y4h7bcy6(VS.80).aspx. According to the
+information there, using __declspec(dllexport) without "extern" we have a
+definition; with "extern" we have a declaration. The settings here override the
+setting in pcre.h (which is included below); it defines only PCRE_EXP_DECL,
+which is all that is needed for applications (they just import the symbols). We
+use:
+
+ PCRE_EXP_DECL for declarations
+ PCRE_EXP_DEFN for definitions of exported functions
+ PCRE_EXP_DATA_DEFN for definitions of exported variables
+
+The reason for the two DEFN macros is that in non-Windows environments, one
+does not want to have "extern" before variable definitions because it leads to
+compiler warnings. So we distinguish between functions and variables. In
+Windows, the two should always be the same.
+
+The reason for wrapping this in #ifndef PCRE_EXP_DECL is so that pcretest,
+which is an application, but needs to import this file in order to "peek" at
+internals, can #include pcre.h first to get an application's-eye view.
+
+In principle, people compiling for non-Windows, non-Unix-like (i.e. uncommon,
+special-purpose environments) might want to stick other stuff in front of
+exported symbols. That's why, in the non-Windows case, we set PCRE_EXP_DEFN and
+PCRE_EXP_DATA_DEFN only if they are not already set. */
+
+#ifndef PCRE_EXP_DECL
+# ifdef _WIN32
+# ifndef PCRE_STATIC
+# define PCRE_EXP_DECL extern __declspec(dllexport)
+# define PCRE_EXP_DEFN __declspec(dllexport)
+# define PCRE_EXP_DATA_DEFN __declspec(dllexport)
+# else
+# define PCRE_EXP_DECL extern
+# define PCRE_EXP_DEFN
+# define PCRE_EXP_DATA_DEFN
+# endif
+# else
+# ifdef __cplusplus
+# define PCRE_EXP_DECL extern "C"
+# else
+# define PCRE_EXP_DECL extern
+# endif
+# ifndef PCRE_EXP_DEFN
+# define PCRE_EXP_DEFN PCRE_EXP_DECL
+# endif
+# ifndef PCRE_EXP_DATA_DEFN
+# define PCRE_EXP_DATA_DEFN
+# endif
+# endif
+#endif
+
+/* We need to have types that specify unsigned 16-bit and 32-bit integers. We
+cannot determine these outside the compilation (e.g. by running a program as
+part of "configure") because PCRE is often cross-compiled for use on other
+systems. Instead we make use of the maximum sizes that are available at
+preprocessor time in standard C environments. */
+
+#if USHRT_MAX == 65535
+ typedef unsigned short pcre_uint16;
+#elif UINT_MAX == 65535
+ typedef unsigned int pcre_uint16;
+#else
+ #error Cannot determine a type for 16-bit unsigned integers
+#endif
+
+#if UINT_MAX == 4294967295
+ typedef unsigned int pcre_uint32;
+#elif ULONG_MAX == 4294967295
+ typedef unsigned long int pcre_uint32;
+#else
+ #error Cannot determine a type for 32-bit unsigned integers
+#endif
+
+/* All character handling must be done as unsigned characters. Otherwise there
+are problems with top-bit-set characters and functions such as isspace().
+However, we leave the interface to the outside world as char *, because that
+should make things easier for callers. We define a short type for unsigned char
+to save lots of typing. I tried "uchar", but it causes problems on Digital
+Unix, where it is defined in sys/types, so use "uschar" instead. */
+
+typedef unsigned char uschar;
+
+/* This is an unsigned int value that no character can ever have. UTF-8
+characters only go up to 0x7fffffff (though Unicode doesn't go beyond
+0x0010ffff). */
+
+#define NOTACHAR 0xffffffff
+
+/* PCRE is able to support several different kinds of newline (CR, LF, CRLF,
+"any" and "anycrlf" at present). The following macros are used to package up
+testing for newlines. NLBLOCK, PSSTART, and PSEND are defined in the various
+modules to indicate in which datablock the parameters exist, and what the
+start/end of string field names are. */
+
+#define NLTYPE_FIXED 0 /* Newline is a fixed length string */
+#define NLTYPE_ANY 1 /* Newline is any Unicode line ending */
+#define NLTYPE_ANYCRLF 2 /* Newline is CR, LF, or CRLF */
+
+/* This macro checks for a newline at the given position */
+
+#define IS_NEWLINE(p) \
+ ((NLBLOCK->nltype != NLTYPE_FIXED)? \
+ ((p) < NLBLOCK->PSEND && \
+ _erts_pcre_is_newline((p), NLBLOCK->nltype, NLBLOCK->PSEND, &(NLBLOCK->nllen),\
+ utf8)) \
+ : \
+ ((p) <= NLBLOCK->PSEND - NLBLOCK->nllen && \
+ (p)[0] == NLBLOCK->nl[0] && \
+ (NLBLOCK->nllen == 1 || (p)[1] == NLBLOCK->nl[1]) \
+ ) \
+ )
+
+/* This macro checks for a newline immediately preceding the given position */
+
+#define WAS_NEWLINE(p) \
+ ((NLBLOCK->nltype != NLTYPE_FIXED)? \
+ ((p) > NLBLOCK->PSSTART && \
+ _erts_pcre_was_newline((p), NLBLOCK->nltype, NLBLOCK->PSSTART, \
+ &(NLBLOCK->nllen), utf8)) \
+ : \
+ ((p) >= NLBLOCK->PSSTART + NLBLOCK->nllen && \
+ (p)[-NLBLOCK->nllen] == NLBLOCK->nl[0] && \
+ (NLBLOCK->nllen == 1 || (p)[-NLBLOCK->nllen+1] == NLBLOCK->nl[1]) \
+ ) \
+ )
+
+/* When PCRE is compiled as a C++ library, the subject pointer can be replaced
+with a custom type. This makes it possible, for example, to allow pcre_exec()
+to process subject strings that are discontinuous by using a smart pointer
+class. It must always be possible to inspect all of the subject string in
+pcre_exec() because of the way it backtracks. Two macros are required in the
+normal case, for sign-unspecified and unsigned char pointers. The former is
+used for the external interface and appears in pcre.h, which is why its name
+must begin with PCRE_. */
+
+#ifdef CUSTOM_SUBJECT_PTR
+#define PCRE_SPTR CUSTOM_SUBJECT_PTR
+#define USPTR CUSTOM_SUBJECT_PTR
+#else
+#define PCRE_SPTR const char *
+#define USPTR const unsigned char *
+#endif
+
+
+
+/* Include the public PCRE header and the definitions of UCP character property
+values. */
+
+#include "pcre.h"
+#include "ucp.h"
+
+/* When compiling for use with the Virtual Pascal compiler, these functions
+need to have their names changed. PCRE must be compiled with the -DVPCOMPAT
+option on the command line. */
+
+#ifdef VPCOMPAT
+#define strlen(s) _strlen(s)
+#define strncmp(s1,s2,m) _strncmp(s1,s2,m)
+#define memcmp(s,c,n) _memcmp(s,c,n)
+#define memcpy(d,s,n) _memcpy(d,s,n)
+#define memmove(d,s,n) _memmove(d,s,n)
+#define memset(s,c,n) _memset(s,c,n)
+#else /* VPCOMPAT */
+
+/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),
+define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY
+is set. Otherwise, include an emulating function for those systems that have
+neither (there some non-Unix environments where this is the case). */
+
+#ifndef HAVE_MEMMOVE
+#undef memmove /* some systems may have a macro */
+#ifdef HAVE_BCOPY
+#define memmove(a, b, c) bcopy(b, a, c)
+#else /* HAVE_BCOPY */
+static void *
+pcre_memmove(void *d, const void *s, size_t n)
+{
+size_t i;
+unsigned char *dest = (unsigned char *)d;
+const unsigned char *src = (const unsigned char *)s;
+if (dest > src)
+ {
+ dest += n;
+ src += n;
+ for (i = 0; i < n; ++i) *(--dest) = *(--src);
+ return (void *)dest;
+ }
+else
+ {
+ for (i = 0; i < n; ++i) *dest++ = *src++;
+ return (void *)(dest - n);
+ }
+}
+#define memmove(a, b, c) pcre_memmove(a, b, c)
+#endif /* not HAVE_BCOPY */
+#endif /* not HAVE_MEMMOVE */
+#endif /* not VPCOMPAT */
+
+
+/* PCRE keeps offsets in its compiled code as 2-byte quantities (always stored
+in big-endian order) by default. These are used, for example, to link from the
+start of a subpattern to its alternatives and its end. The use of 2 bytes per
+offset limits the size of the compiled regex to around 64K, which is big enough
+for almost everybody. However, I received a request for an even bigger limit.
+For this reason, and also to make the code easier to maintain, the storing and
+loading of offsets from the byte string is now handled by the macros that are
+defined here.
+
+The macros are controlled by the value of LINK_SIZE. This defaults to 2 in
+the config.h file, but can be overridden by using -D on the command line. This
+is automated on Unix systems via the "configure" command. */
+
+#if LINK_SIZE == 2
+
+#define PUT(a,n,d) \
+ (a[n] = (d) >> 8), \
+ (a[(n)+1] = (d) & 255)
+
+#define GET(a,n) \
+ (((a)[n] << 8) | (a)[(n)+1])
+
+#define MAX_PATTERN_SIZE (1 << 16)
+
+
+#elif LINK_SIZE == 3
+
+#define PUT(a,n,d) \
+ (a[n] = (d) >> 16), \
+ (a[(n)+1] = (d) >> 8), \
+ (a[(n)+2] = (d) & 255)
+
+#define GET(a,n) \
+ (((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2])
+
+#define MAX_PATTERN_SIZE (1 << 24)
+
+
+#elif LINK_SIZE == 4
+
+#define PUT(a,n,d) \
+ (a[n] = (d) >> 24), \
+ (a[(n)+1] = (d) >> 16), \
+ (a[(n)+2] = (d) >> 8), \
+ (a[(n)+3] = (d) & 255)
+
+#define GET(a,n) \
+ (((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3])
+
+#define MAX_PATTERN_SIZE (1 << 30) /* Keep it positive */
+
+
+#else
+#error LINK_SIZE must be either 2, 3, or 4
+#endif
+
+
+/* Convenience macro defined in terms of the others */
+
+#define PUTINC(a,n,d) PUT(a,n,d), a += LINK_SIZE
+
+
+/* PCRE uses some other 2-byte quantities that do not change when the size of
+offsets changes. There are used for repeat counts and for other things such as
+capturing parenthesis numbers in back references. */
+
+#define PUT2(a,n,d) \
+ a[n] = (d) >> 8; \
+ a[(n)+1] = (d) & 255
+
+#define GET2(a,n) \
+ (((a)[n] << 8) | (a)[(n)+1])
+
+#define PUT2INC(a,n,d) PUT2(a,n,d), a += 2
+
+
+/* When UTF-8 encoding is being used, a character is no longer just a single
+byte. The macros for character handling generate simple sequences when used in
+byte-mode, and more complicated ones for UTF-8 characters. BACKCHAR should
+never be called in byte mode. To make sure it can never even appear when UTF-8
+support is omitted, we don't even define it. */
+
+#ifndef SUPPORT_UTF8
+#define NEXTCHAR(p,end) p++;
+#define GETCHAR(c, eptr) c = *eptr;
+#define GETCHARTEST(c, eptr) c = *eptr;
+#define GETCHARINC(c, eptr) c = *eptr++;
+#define GETCHARINCTEST(c, eptr) c = *eptr++;
+#define GETCHARLEN(c, eptr, len) c = *eptr;
+/* #define BACKCHAR(eptr) */
+
+#else /* SUPPORT_UTF8 */
+
+/* Advance a character pointer one byte in non-UTF-8 mode and by one character
+in UTF-8 mode. */
+
+#define NEXTCHAR(p,end) \
+ p++; \
+ if (utf8) { while(p < end && (*p & 0xc0) == 0x80) p++; }
+
+/* Get the next UTF-8 character, not advancing the pointer. This is called when
+we know we are in UTF-8 mode. */
+
+#define GETCHAR(c, eptr) \
+ c = *eptr; \
+ if (c >= 0xc0) \
+ { \
+ int gcii; \
+ int gcaa = _erts_pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
+ int gcss = 6*gcaa; \
+ c = (c & _erts_pcre_utf8_table3[gcaa]) << gcss; \
+ for (gcii = 1; gcii <= gcaa; gcii++) \
+ { \
+ gcss -= 6; \
+ c |= (eptr[gcii] & 0x3f) << gcss; \
+ } \
+ }
+
+/* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the
+pointer. */
+
+#define GETCHARTEST(c, eptr) \
+ c = *eptr; \
+ if (utf8 && c >= 0xc0) \
+ { \
+ int gcii; \
+ int gcaa = _erts_pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
+ int gcss = 6*gcaa; \
+ c = (c & _erts_pcre_utf8_table3[gcaa]) << gcss; \
+ for (gcii = 1; gcii <= gcaa; gcii++) \
+ { \
+ gcss -= 6; \
+ c |= (eptr[gcii] & 0x3f) << gcss; \
+ } \
+ }
+
+/* Get the next UTF-8 character, advancing the pointer. This is called when we
+know we are in UTF-8 mode. */
+
+#define GETCHARINC(c, eptr) \
+ c = *eptr++; \
+ if (c >= 0xc0) \
+ { \
+ int gcaa = _erts_pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
+ int gcss = 6*gcaa; \
+ c = (c & _erts_pcre_utf8_table3[gcaa]) << gcss; \
+ while (gcaa-- > 0) \
+ { \
+ gcss -= 6; \
+ c |= (*eptr++ & 0x3f) << gcss; \
+ } \
+ }
+
+/* Get the next character, testing for UTF-8 mode, and advancing the pointer */
+
+#define GETCHARINCTEST(c, eptr) \
+ c = *eptr++; \
+ if (utf8 && c >= 0xc0) \
+ { \
+ int gcaa = _erts_pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
+ int gcss = 6*gcaa; \
+ c = (c & _erts_pcre_utf8_table3[gcaa]) << gcss; \
+ while (gcaa-- > 0) \
+ { \
+ gcss -= 6; \
+ c |= (*eptr++ & 0x3f) << gcss; \
+ } \
+ }
+
+/* Get the next UTF-8 character, not advancing the pointer, incrementing length
+if there are extra bytes. This is called when we know we are in UTF-8 mode. */
+
+#define GETCHARLEN(c, eptr, len) \
+ c = *eptr; \
+ if (c >= 0xc0) \
+ { \
+ int gcii; \
+ int gcaa = _erts_pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
+ int gcss = 6*gcaa; \
+ c = (c & _erts_pcre_utf8_table3[gcaa]) << gcss; \
+ for (gcii = 1; gcii <= gcaa; gcii++) \
+ { \
+ gcss -= 6; \
+ c |= (eptr[gcii] & 0x3f) << gcss; \
+ } \
+ len += gcaa; \
+ }
+
+/* If the pointer is not at the start of a character, move it back until
+it is. This is called only in UTF-8 mode - we don't put a test within the macro
+because almost all calls are already within a block of UTF-8 only code. */
+
+#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--
+
+#endif
+
+
+/* In case there is no definition of offsetof() provided - though any proper
+Standard C system should have one. */
+
+#ifndef offsetof
+#define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field))
+#endif
+
+
+/* These are the public options that can change during matching. */
+
+#define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL)
+
+/* Private flags containing information about the compiled regex. They used to
+live at the top end of the options word, but that got almost full, so now they
+are in a 16-bit flags word. */
+
+#define PCRE_NOPARTIAL 0x0001 /* can't use partial with this regex */
+#define PCRE_FIRSTSET 0x0002 /* first_byte is set */
+#define PCRE_REQCHSET 0x0004 /* req_byte is set */
+#define PCRE_STARTLINE 0x0008 /* start after \n for multiline */
+#define PCRE_JCHANGED 0x0010 /* j option used in regex */
+#define PCRE_HASCRORLF 0x0020 /* explicit \r or \n in pattern */
+
+/* Options for the "extra" block produced by pcre_study(). */
+
+#define PCRE_STUDY_MAPPED 0x01 /* a map of starting chars exists */
+
+/* Masks for identifying the public options that are permitted at compile
+time, run time, or study time, respectively. */
+
+#define PCRE_NEWLINE_BITS (PCRE_NEWLINE_CR|PCRE_NEWLINE_LF|PCRE_NEWLINE_ANY| \
+ PCRE_NEWLINE_ANYCRLF)
+
+#define PUBLIC_OPTIONS \
+ (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \
+ PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \
+ PCRE_NO_AUTO_CAPTURE|PCRE_NO_UTF8_CHECK|PCRE_AUTO_CALLOUT|PCRE_FIRSTLINE| \
+ PCRE_DUPNAMES|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)
+
+#define PUBLIC_EXEC_OPTIONS \
+ (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NO_UTF8_CHECK| \
+ PCRE_PARTIAL|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)
+
+#define PUBLIC_DFA_EXEC_OPTIONS \
+ (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NO_UTF8_CHECK| \
+ PCRE_PARTIAL|PCRE_DFA_SHORTEST|PCRE_DFA_RESTART|PCRE_NEWLINE_BITS| \
+ PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)
+
+#define PUBLIC_STUDY_OPTIONS 0 /* None defined */
+
+/* Magic number to provide a small check against being handed junk. Also used
+to detect whether a pattern was compiled on a host of different endianness. */
+
+#define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */
+
+/* Negative values for the firstchar and reqchar variables */
+
+#define REQ_UNSET (-2)
+#define REQ_NONE (-1)
+
+/* The maximum remaining length of subject we are prepared to search for a
+req_byte match. */
+
+#define REQ_BYTE_MAX 1000
+
+/* Flags added to firstbyte or reqbyte; a "non-literal" item is either a
+variable-length repeat, or a anything other than literal characters. */
+
+#define REQ_CASELESS 0x0100 /* indicates caselessness */
+#define REQ_VARY 0x0200 /* reqbyte followed non-literal item */
+
+/* Miscellaneous definitions */
+
+typedef int BOOL;
+
+#define FALSE 0
+#define TRUE 1
+
+/* Escape items that are just an encoding of a particular data value. */
+
+#ifndef ESC_e
+#define ESC_e 27
+#endif
+
+#ifndef ESC_f
+#define ESC_f '\f'
+#endif
+
+#ifndef ESC_n
+#define ESC_n '\n'
+#endif
+
+#ifndef ESC_r
+#define ESC_r '\r'
+#endif
+
+/* We can't officially use ESC_t because it is a POSIX reserved identifier
+(presumably because of all the others like size_t). */
+
+#ifndef ESC_tee
+#define ESC_tee '\t'
+#endif
+
+/* Codes for different types of Unicode property */
+
+#define PT_ANY 0 /* Any property - matches all chars */
+#define PT_LAMP 1 /* L& - the union of Lu, Ll, Lt */
+#define PT_GC 2 /* General characteristic (e.g. L) */
+#define PT_PC 3 /* Particular characteristic (e.g. Lu) */
+#define PT_SC 4 /* Script (e.g. Han) */
+
+/* Flag bits and data types for the extended class (OP_XCLASS) for classes that
+contain UTF-8 characters with values greater than 255. */
+
+#define XCL_NOT 0x01 /* Flag: this is a negative class */
+#define XCL_MAP 0x02 /* Flag: a 32-byte map is present */
+
+#define XCL_END 0 /* Marks end of individual items */
+#define XCL_SINGLE 1 /* Single item (one multibyte char) follows */
+#define XCL_RANGE 2 /* A range (two multibyte chars) follows */
+#define XCL_PROP 3 /* Unicode property (2-byte property code follows) */
+#define XCL_NOTPROP 4 /* Unicode inverted property (ditto) */
+
+/* These are escaped items that aren't just an encoding of a particular data
+value such as \n. They must have non-zero values, as check_escape() returns
+their negation. Also, they must appear in the same order as in the opcode
+definitions below, up to ESC_z. There's a dummy for OP_ANY because it
+corresponds to "." rather than an escape sequence. The final one must be
+ESC_REF as subsequent values are used for backreferences (\1, \2, \3, etc).
+There are two tests in the code for an escape greater than ESC_b and less than
+ESC_Z to detect the types that may be repeated. These are the types that
+consume characters. If any new escapes are put in between that don't consume a
+character, that code will have to change. */
+
+enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s,
+ ESC_W, ESC_w, ESC_dum1, ESC_C, ESC_P, ESC_p, ESC_R, ESC_H, ESC_h,
+ ESC_V, ESC_v, ESC_X, ESC_Z, ESC_z, ESC_E, ESC_Q, ESC_k, ESC_REF };
+
+
+/* Opcode table: Starting from 1 (i.e. after OP_END), the values up to
+OP_EOD must correspond in order to the list of escapes immediately above.
+
+*** NOTE NOTE NOTE *** Whenever this list is updated, the two macro definitions
+that follow must also be updated to match. There is also a table called
+"coptable" in pcre_dfa_exec.c that must be updated. */
+
+enum {
+ OP_END, /* 0 End of pattern */
+
+ /* Values corresponding to backslashed metacharacters */
+
+ OP_SOD, /* 1 Start of data: \A */
+ OP_SOM, /* 2 Start of match (subject + offset): \G */
+ OP_SET_SOM, /* 3 Set start of match (\K) */
+ OP_NOT_WORD_BOUNDARY, /* 4 \B */
+ OP_WORD_BOUNDARY, /* 5 \b */
+ OP_NOT_DIGIT, /* 6 \D */
+ OP_DIGIT, /* 7 \d */
+ OP_NOT_WHITESPACE, /* 8 \S */
+ OP_WHITESPACE, /* 9 \s */
+ OP_NOT_WORDCHAR, /* 10 \W */
+ OP_WORDCHAR, /* 11 \w */
+ OP_ANY, /* 12 Match any character */
+ OP_ANYBYTE, /* 13 Match any byte (\C); different to OP_ANY for UTF-8 */
+ OP_NOTPROP, /* 14 \P (not Unicode property) */
+ OP_PROP, /* 15 \p (Unicode property) */
+ OP_ANYNL, /* 16 \R (any newline sequence) */
+ OP_NOT_HSPACE, /* 17 \H (not horizontal whitespace) */
+ OP_HSPACE, /* 18 \h (horizontal whitespace) */
+ OP_NOT_VSPACE, /* 19 \V (not vertical whitespace) */
+ OP_VSPACE, /* 20 \v (vertical whitespace) */
+ OP_EXTUNI, /* 21 \X (extended Unicode sequence */
+ OP_EODN, /* 22 End of data or \n at end of data: \Z. */
+ OP_EOD, /* 23 End of data: \z */
+
+ OP_OPT, /* 24 Set runtime options */
+ OP_CIRC, /* 25 Start of line - varies with multiline switch */
+ OP_DOLL, /* 26 End of line - varies with multiline switch */
+ OP_CHAR, /* 27 Match one character, casefully */
+ OP_CHARNC, /* 28 Match one character, caselessly */
+ OP_NOT, /* 29 Match one character, not the following one */
+
+ OP_STAR, /* 30 The maximizing and minimizing versions of */
+ OP_MINSTAR, /* 31 these six opcodes must come in pairs, with */
+ OP_PLUS, /* 32 the minimizing one second. */
+ OP_MINPLUS, /* 33 This first set applies to single characters.*/
+ OP_QUERY, /* 34 */
+ OP_MINQUERY, /* 35 */
+
+ OP_UPTO, /* 36 From 0 to n matches */
+ OP_MINUPTO, /* 37 */
+ OP_EXACT, /* 38 Exactly n matches */
+
+ OP_POSSTAR, /* 39 Possessified star */
+ OP_POSPLUS, /* 40 Possessified plus */
+ OP_POSQUERY, /* 41 Posesssified query */
+ OP_POSUPTO, /* 42 Possessified upto */
+
+ OP_NOTSTAR, /* 43 The maximizing and minimizing versions of */
+ OP_NOTMINSTAR, /* 44 these six opcodes must come in pairs, with */
+ OP_NOTPLUS, /* 45 the minimizing one second. They must be in */
+ OP_NOTMINPLUS, /* 46 exactly the same order as those above. */
+ OP_NOTQUERY, /* 47 This set applies to "not" single characters. */
+ OP_NOTMINQUERY, /* 48 */
+
+ OP_NOTUPTO, /* 49 From 0 to n matches */
+ OP_NOTMINUPTO, /* 50 */
+ OP_NOTEXACT, /* 51 Exactly n matches */
+
+ OP_NOTPOSSTAR, /* 52 Possessified versions */
+ OP_NOTPOSPLUS, /* 53 */
+ OP_NOTPOSQUERY, /* 54 */
+ OP_NOTPOSUPTO, /* 55 */
+
+ OP_TYPESTAR, /* 56 The maximizing and minimizing versions of */
+ OP_TYPEMINSTAR, /* 57 these six opcodes must come in pairs, with */
+ OP_TYPEPLUS, /* 58 the minimizing one second. These codes must */
+ OP_TYPEMINPLUS, /* 59 be in exactly the same order as those above. */
+ OP_TYPEQUERY, /* 60 This set applies to character types such as \d */
+ OP_TYPEMINQUERY, /* 61 */
+
+ OP_TYPEUPTO, /* 62 From 0 to n matches */
+ OP_TYPEMINUPTO, /* 63 */
+ OP_TYPEEXACT, /* 64 Exactly n matches */
+
+ OP_TYPEPOSSTAR, /* 65 Possessified versions */
+ OP_TYPEPOSPLUS, /* 66 */
+ OP_TYPEPOSQUERY, /* 67 */
+ OP_TYPEPOSUPTO, /* 68 */
+
+ OP_CRSTAR, /* 69 The maximizing and minimizing versions of */
+ OP_CRMINSTAR, /* 70 all these opcodes must come in pairs, with */
+ OP_CRPLUS, /* 71 the minimizing one second. These codes must */
+ OP_CRMINPLUS, /* 72 be in exactly the same order as those above. */
+ OP_CRQUERY, /* 73 These are for character classes and back refs */
+ OP_CRMINQUERY, /* 74 */
+ OP_CRRANGE, /* 75 These are different to the three sets above. */
+ OP_CRMINRANGE, /* 76 */
+
+ OP_CLASS, /* 77 Match a character class, chars < 256 only */
+ OP_NCLASS, /* 78 Same, but the bitmap was created from a negative
+ class - the difference is relevant only when a UTF-8
+ character > 255 is encountered. */
+
+ OP_XCLASS, /* 79 Extended class for handling UTF-8 chars within the
+ class. This does both positive and negative. */
+
+ OP_REF, /* 80 Match a back reference */
+ OP_RECURSE, /* 81 Match a numbered subpattern (possibly recursive) */
+ OP_CALLOUT, /* 82 Call out to external function if provided */
+
+ OP_ALT, /* 83 Start of alternation */
+ OP_KET, /* 84 End of group that doesn't have an unbounded repeat */
+ OP_KETRMAX, /* 85 These two must remain together and in this */
+ OP_KETRMIN, /* 86 order. They are for groups the repeat for ever. */
+
+ /* The assertions must come before BRA, CBRA, ONCE, and COND.*/
+
+ OP_ASSERT, /* 87 Positive lookahead */
+ OP_ASSERT_NOT, /* 88 Negative lookahead */
+ OP_ASSERTBACK, /* 89 Positive lookbehind */
+ OP_ASSERTBACK_NOT, /* 90 Negative lookbehind */
+ OP_REVERSE, /* 91 Move pointer back - used in lookbehind assertions */
+
+ /* ONCE, BRA, CBRA, and COND must come after the assertions, with ONCE first,
+ as there's a test for >= ONCE for a subpattern that isn't an assertion. */
+
+ OP_ONCE, /* 92 Atomic group */
+ OP_BRA, /* 93 Start of non-capturing bracket */
+ OP_CBRA, /* 94 Start of capturing bracket */
+ OP_COND, /* 95 Conditional group */
+
+ /* These three must follow the previous three, in the same order. There's a
+ check for >= SBRA to distinguish the two sets. */
+
+ OP_SBRA, /* 96 Start of non-capturing bracket, check empty */
+ OP_SCBRA, /* 97 Start of capturing bracket, check empty */
+ OP_SCOND, /* 98 Conditional group, check empty */
+
+ OP_CREF, /* 99 Used to hold a capture number as condition */
+ OP_RREF, /* 100 Used to hold a recursion number as condition */
+ OP_DEF, /* 101 The DEFINE condition */
+
+ OP_BRAZERO, /* 102 These two must remain together and in this */
+ OP_BRAMINZERO, /* 103 order. */
+
+ /* These are backtracking control verbs */
+
+ OP_PRUNE, /* 104 */
+ OP_SKIP, /* 105 */
+ OP_THEN, /* 106 */
+ OP_COMMIT, /* 107 */
+
+ /* These are forced failure and success verbs */
+
+ OP_FAIL, /* 108 */
+ OP_ACCEPT /* 109 */
+};
+
+
+/* This macro defines textual names for all the opcodes. These are used only
+for debugging. The macro is referenced only in pcre_printint.c. */
+
+#define OP_NAME_LIST \
+ "End", "\\A", "\\G", "\\K", "\\B", "\\b", "\\D", "\\d", \
+ "\\S", "\\s", "\\W", "\\w", "Any", "Anybyte", \
+ "notprop", "prop", "\\R", "\\H", "\\h", "\\V", "\\v", \
+ "extuni", "\\Z", "\\z", \
+ "Opt", "^", "$", "char", "charnc", "not", \
+ "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \
+ "*+","++", "?+", "{", \
+ "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \
+ "*+","++", "?+", "{", \
+ "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \
+ "*+","++", "?+", "{", \
+ "*", "*?", "+", "+?", "?", "??", "{", "{", \
+ "class", "nclass", "xclass", "Ref", "Recurse", "Callout", \
+ "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not", \
+ "AssertB", "AssertB not", "Reverse", \
+ "Once", "Bra", "CBra", "Cond", "SBra", "SCBra", "SCond", \
+ "Cond ref", "Cond rec", "Cond def", "Brazero", "Braminzero", \
+ "*PRUNE", "*SKIP", "*THEN", "*COMMIT", "*FAIL", "*ACCEPT"
+
+
+/* This macro defines the length of fixed length operations in the compiled
+regex. The lengths are used when searching for specific things, and also in the
+debugging printing of a compiled regex. We use a macro so that it can be
+defined close to the definitions of the opcodes themselves.
+
+As things have been extended, some of these are no longer fixed lenths, but are
+minima instead. For example, the length of a single-character repeat may vary
+in UTF-8 mode. The code that uses this table must know about such things. */
+
+#define OP_LENGTHS \
+ 1, /* End */ \
+ 1, 1, 1, 1, 1, /* \A, \G, \K, \B, \b */ \
+ 1, 1, 1, 1, 1, 1, /* \D, \d, \S, \s, \W, \w */ \
+ 1, 1, /* Any, Anybyte */ \
+ 3, 3, 1, /* NOTPROP, PROP, EXTUNI */ \
+ 1, 1, 1, 1, 1, /* \R, \H, \h, \V, \v */ \
+ 1, 1, 2, 1, 1, /* \Z, \z, Opt, ^, $ */ \
+ 2, /* Char - the minimum length */ \
+ 2, /* Charnc - the minimum length */ \
+ 2, /* not */ \
+ /* Positive single-char repeats ** These are */ \
+ 2, 2, 2, 2, 2, 2, /* *, *?, +, +?, ?, ?? ** minima in */ \
+ 4, 4, 4, /* upto, minupto, exact ** UTF-8 mode */ \
+ 2, 2, 2, 4, /* *+, ++, ?+, upto+ */ \
+ /* Negative single-char repeats - only for chars < 256 */ \
+ 2, 2, 2, 2, 2, 2, /* NOT *, *?, +, +?, ?, ?? */ \
+ 4, 4, 4, /* NOT upto, minupto, exact */ \
+ 2, 2, 2, 4, /* Possessive *, +, ?, upto */ \
+ /* Positive type repeats */ \
+ 2, 2, 2, 2, 2, 2, /* Type *, *?, +, +?, ?, ?? */ \
+ 4, 4, 4, /* Type upto, minupto, exact */ \
+ 2, 2, 2, 4, /* Possessive *+, ++, ?+, upto+ */ \
+ /* Character class & ref repeats */ \
+ 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ \
+ 5, 5, /* CRRANGE, CRMINRANGE */ \
+ 33, /* CLASS */ \
+ 33, /* NCLASS */ \
+ 0, /* XCLASS - variable length */ \
+ 3, /* REF */ \
+ 1+LINK_SIZE, /* RECURSE */ \
+ 2+2*LINK_SIZE, /* CALLOUT */ \
+ 1+LINK_SIZE, /* Alt */ \
+ 1+LINK_SIZE, /* Ket */ \
+ 1+LINK_SIZE, /* KetRmax */ \
+ 1+LINK_SIZE, /* KetRmin */ \
+ 1+LINK_SIZE, /* Assert */ \
+ 1+LINK_SIZE, /* Assert not */ \
+ 1+LINK_SIZE, /* Assert behind */ \
+ 1+LINK_SIZE, /* Assert behind not */ \
+ 1+LINK_SIZE, /* Reverse */ \
+ 1+LINK_SIZE, /* ONCE */ \
+ 1+LINK_SIZE, /* BRA */ \
+ 3+LINK_SIZE, /* CBRA */ \
+ 1+LINK_SIZE, /* COND */ \
+ 1+LINK_SIZE, /* SBRA */ \
+ 3+LINK_SIZE, /* SCBRA */ \
+ 1+LINK_SIZE, /* SCOND */ \
+ 3, /* CREF */ \
+ 3, /* RREF */ \
+ 1, /* DEF */ \
+ 1, 1, /* BRAZERO, BRAMINZERO */ \
+ 1, 1, 1, 1, /* PRUNE, SKIP, THEN, COMMIT, */ \
+ 1, 1 /* FAIL, ACCEPT */
+
+
+/* A magic value for OP_RREF to indicate the "any recursion" condition. */
+
+#define RREF_ANY 0xffff
+
+/* Error code numbers. They are given names so that they can more easily be
+tracked. */
+
+enum { ERR0, ERR1, ERR2, ERR3, ERR4, ERR5, ERR6, ERR7, ERR8, ERR9,
+ ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19,
+ ERR20, ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR28, ERR29,
+ ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39,
+ ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49,
+ ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59,
+ ERR60, ERR61, ERR62, ERR63 };
+
+/* The real format of the start of the pcre block; the index of names and the
+code vector run on as long as necessary after the end. We store an explicit
+offset to the name table so that if a regex is compiled on one host, saved, and
+then run on another where the size of pointers is different, all might still
+be well. For the case of compiled-on-4 and run-on-8, we include an extra
+pointer that is always NULL. For future-proofing, a few dummy fields were
+originally included - even though you can never get this planning right - but
+there is only one left now.
+
+NOTE NOTE NOTE:
+Because people can now save and re-use compiled patterns, any additions to this
+structure should be made at the end, and something earlier (e.g. a new
+flag in the options or one of the dummy fields) should indicate that the new
+fields are present. Currently PCRE always sets the dummy fields to zero.
+NOTE NOTE NOTE:
+*/
+
+typedef struct real_pcre {
+ pcre_uint32 magic_number;
+ pcre_uint32 size; /* Total that was malloced */
+ pcre_uint32 options; /* Public options */
+ pcre_uint16 flags; /* Private flags */
+ pcre_uint16 dummy1; /* For future use */
+ pcre_uint16 top_bracket;
+ pcre_uint16 top_backref;
+ pcre_uint16 first_byte;
+ pcre_uint16 req_byte;
+ pcre_uint16 name_table_offset; /* Offset to name table that follows */
+ pcre_uint16 name_entry_size; /* Size of any name items */
+ pcre_uint16 name_count; /* Number of name items */
+ pcre_uint16 ref_count; /* Reference count */
+
+ const unsigned char *tables; /* Pointer to tables or NULL for std */
+ const unsigned char *nullpad; /* NULL padding */
+} real_pcre;
+
+/* The format of the block used to store data from pcre_study(). The same
+remark (see NOTE above) about extending this structure applies. */
+
+typedef struct pcre_study_data {
+ pcre_uint32 size; /* Total that was malloced */
+ pcre_uint32 options;
+ uschar start_bits[32];
+} pcre_study_data;
+
+/* Structure for passing "static" information around between the functions
+doing the compiling, so that they are thread-safe. */
+
+typedef struct compile_data {
+ const uschar *lcc; /* Points to lower casing table */
+ const uschar *fcc; /* Points to case-flipping table */
+ const uschar *cbits; /* Points to character type table */
+ const uschar *ctypes; /* Points to table of type maps */
+ const uschar *start_workspace;/* The start of working space */
+ const uschar *start_code; /* The start of the compiled code */
+ const uschar *start_pattern; /* The start of the pattern */
+ const uschar *end_pattern; /* The end of the pattern */
+ uschar *hwm; /* High watermark of workspace */
+ uschar *name_table; /* The name/number table */
+ int names_found; /* Number of entries so far */
+ int name_entry_size; /* Size of each entry */
+ int bracount; /* Count of capturing parens as we compile */
+ int final_bracount; /* Saved value after first pass */
+ int top_backref; /* Maximum back reference */
+ unsigned int backref_map; /* Bitmap of low back refs */
+ int external_options; /* External (initial) options */
+ int external_flags; /* External flag bits to be set */
+ int req_varyopt; /* "After variable item" flag for reqbyte */
+ BOOL had_accept; /* (*ACCEPT) encountered */
+ int nltype; /* Newline type */
+ int nllen; /* Newline string length */
+ uschar nl[4]; /* Newline string when fixed length */
+} compile_data;
+
+/* Structure for maintaining a chain of pointers to the currently incomplete
+branches, for testing for left recursion. */
+
+typedef struct branch_chain {
+ struct branch_chain *outer;
+ uschar *current;
+} branch_chain;
+
+/* Structure for items in a linked list that represents an explicit recursive
+call within the pattern. */
+
+typedef struct recursion_info {
+ struct recursion_info *prevrec; /* Previous recursion record (or NULL) */
+ int group_num; /* Number of group that was called */
+ const uschar *after_call; /* "Return value": points after the call in the expr */
+ USPTR save_start; /* Old value of mstart */
+ int *offset_save; /* Pointer to start of saved offsets */
+ int saved_max; /* Number of saved offsets */
+} recursion_info;
+
+/* Structure for building a chain of data for holding the values of the subject
+pointer at the start of each subpattern, so as to detect when an empty string
+has been matched by a subpattern - to break infinite loops. */
+
+typedef struct eptrblock {
+ struct eptrblock *epb_prev;
+ USPTR epb_saved_eptr;
+} eptrblock;
+
+
+/* Structure for passing "static" information around between the functions
+doing traditional NFA matching, so that they are thread-safe. */
+
+typedef struct match_data {
+#ifdef ERLANG_INTEGRATION
+ unsigned long int loop_limit;
+ void *state_save;
+#endif
+ unsigned long int match_call_count; /* As it says */
+ unsigned long int match_limit; /* As it says */
+ unsigned long int match_limit_recursion; /* As it says */
+ int *offset_vector; /* Offset vector */
+ int offset_end; /* One past the end */
+ int offset_max; /* The maximum usable for return data */
+ int nltype; /* Newline type */
+ int nllen; /* Newline string length */
+ uschar nl[4]; /* Newline string when fixed */
+ const uschar *lcc; /* Points to lower casing table */
+ const uschar *ctypes; /* Points to table of type maps */
+ BOOL offset_overflow; /* Set if too many extractions */
+ BOOL notbol; /* NOTBOL flag */
+ BOOL noteol; /* NOTEOL flag */
+ BOOL utf8; /* UTF8 flag */
+ BOOL endonly; /* Dollar not before final \n */
+ BOOL notempty; /* Empty string match not wanted */
+ BOOL partial; /* PARTIAL flag */
+ BOOL hitend; /* Hit the end of the subject at some point */
+ BOOL bsr_anycrlf; /* \R is just any CRLF, not full Unicode */
+ const uschar *start_code; /* For use when recursing */
+ USPTR start_subject; /* Start of the subject string */
+ USPTR end_subject; /* End of the subject string */
+ USPTR start_match_ptr; /* Start of matched string */
+ USPTR end_match_ptr; /* Subject position at end match */
+ int end_offset_top; /* Highwater mark at end of match */
+ int capture_last; /* Most recent capture number */
+ int start_offset; /* The start offset value */
+ eptrblock *eptrchain; /* Chain of eptrblocks for tail recursions */
+ int eptrn; /* Next free eptrblock */
+ recursion_info *recursive; /* Linked list of recursion data */
+ void *callout_data; /* To pass back to callouts */
+} match_data;
+
+/* A similar structure is used for the same purpose by the DFA matching
+functions. */
+
+typedef struct dfa_match_data {
+ const uschar *start_code; /* Start of the compiled pattern */
+ const uschar *start_subject; /* Start of the subject string */
+ const uschar *end_subject; /* End of subject string */
+ const uschar *tables; /* Character tables */
+ int moptions; /* Match options */
+ int poptions; /* Pattern options */
+ int nltype; /* Newline type */
+ int nllen; /* Newline string length */
+ uschar nl[4]; /* Newline string when fixed */
+ void *callout_data; /* To pass back to callouts */
+} dfa_match_data;
+
+/* Bit definitions for entries in the pcre_ctypes table. */
+
+#define ctype_space 0x01
+#define ctype_letter 0x02
+#define ctype_digit 0x04
+#define ctype_xdigit 0x08
+#define ctype_word 0x10 /* alphanumeric or '_' */
+#define ctype_meta 0x80 /* regexp meta char or zero (end pattern) */
+
+/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
+of bits for a class map. Some classes are built by combining these tables. */
+
+#define cbit_space 0 /* [:space:] or \s */
+#define cbit_xdigit 32 /* [:xdigit:] */
+#define cbit_digit 64 /* [:digit:] or \d */
+#define cbit_upper 96 /* [:upper:] */
+#define cbit_lower 128 /* [:lower:] */
+#define cbit_word 160 /* [:word:] or \w */
+#define cbit_graph 192 /* [:graph:] */
+#define cbit_print 224 /* [:print:] */
+#define cbit_punct 256 /* [:punct:] */
+#define cbit_cntrl 288 /* [:cntrl:] */
+#define cbit_length 320 /* Length of the cbits table */
+
+/* Offsets of the various tables from the base tables pointer, and
+total length. */
+
+#define lcc_offset 0
+#define fcc_offset 256
+#define cbits_offset 512
+#define ctypes_offset (cbits_offset + cbit_length)
+#define tables_length (ctypes_offset + 256)
+
+/* Layout of the UCP type table that translates property names into types and
+codes. Each entry used to point directly to a name, but to reduce the number of
+relocations in shared libraries, it now has an offset into a single string
+instead. */
+
+typedef struct {
+ pcre_uint16 name_offset;
+ pcre_uint16 type;
+ pcre_uint16 value;
+} ucp_type_table;
+
+
+/* Internal shared data tables. These are tables that are used by more than one
+of the exported public functions. They have to be "external" in the C sense,
+but are not part of the PCRE public API. The data for these tables is in the
+pcre_tables.c module. */
+
+extern const int _erts_pcre_utf8_table1[];
+extern const int _erts_pcre_utf8_table2[];
+extern const int _erts_pcre_utf8_table3[];
+extern const uschar _erts_pcre_utf8_table4[];
+
+extern const int _erts_pcre_utf8_table1_size;
+
+extern const char _erts_pcre_utt_names[];
+extern const ucp_type_table _erts_pcre_utt[];
+extern const int _erts_pcre_utt_size;
+
+extern const uschar _erts_pcre_default_tables[];
+
+extern const uschar _erts_pcre_OP_lengths[];
+
+
+/* Internal shared functions. These are functions that are used by more than
+one of the exported public functions. They have to be "external" in the C
+sense, but are not part of the PCRE public API. */
+
+extern BOOL _erts_pcre_is_newline(const uschar *, int, const uschar *,
+ int *, BOOL);
+extern int _erts_pcre_ord2utf8(int, uschar *);
+extern real_pcre *_erts_pcre_try_flipped(const real_pcre *, real_pcre *,
+ const pcre_study_data *, pcre_study_data *);
+extern int _erts_pcre_ucp_findprop(const unsigned int, int *, int *);
+extern unsigned int _erts_pcre_ucp_othercase(const unsigned int);
+extern int _erts_pcre_valid_utf8(const uschar *, int);
+extern BOOL _erts_pcre_was_newline(const uschar *, int, const uschar *,
+ int *, BOOL);
+extern BOOL _erts_pcre_xclass(int, const uschar *);
+
+#endif
+
+/* End of pcre_internal.h */