Remove obsolete old_scheduler_SUITE

old_scheduler_SUITE was written before the SMP emulator.
It does not test anything that scheduler_SUITE does not
test. Keeping it wastes time when running the emulator
test suite, and does not help us find any bugs that
scheduler_SUITE would find.

1 files changed, 0 insertions, 384 deletions

diff --git a/erts/emulator/test/old_scheduler_SUITE.erl b/erts/emulator/test/old_scheduler_SUITE.erl
deleted file mode 100644
index 8515a87df8..0000000000
--- a/erts/emulator/test/old_scheduler_SUITE.erl
+++ /dev/null
@@ -1,384 +0,0 @@
-%%
-%% %CopyrightBegin%
-%% 
-%% Copyright Ericsson AB 2004-2016. All Rights Reserved.
-%% 
-%% Licensed under the Apache License, Version 2.0 (the "License");
-%% you may not use this file except in compliance with the License.
-%% You may obtain a copy of the License at
-%%
-%%     http://www.apache.org/licenses/LICENSE-2.0
-%%
-%% Unless required by applicable law or agreed to in writing, software
-%% distributed under the License is distributed on an "AS IS" BASIS,
-%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-%% See the License for the specific language governing permissions and
-%% limitations under the License.
-%% 
-%% %CopyrightEnd%
-%%
-
--module(old_scheduler_SUITE).
-
--include_lib("common_test/include/ct.hrl").
-
--export([all/0, suite/0,
-         init_per_testcase/2, end_per_testcase/2]).
--export([equal/1, many_low/1, few_low/1, max/1, high/1]).
-
-suite() ->
-    [{ct_hooks,[ts_install_cth]},
-     {timetrap, {minutes, 11}}].
-
-all() -> 
-    case catch erlang:system_info(modified_timing_level) of
-        Level when is_integer(Level) ->
-            {skipped,
-             "Modified timing (level " ++
-             integer_to_list(Level) ++
-             ") is enabled. Testcases gets messed "
-             "up by modfied timing."};
-        _ -> [equal, many_low, few_low, max, high]
-    end.
-
-
-%%-----------------------------------------------------------------------------------
-%% TEST SUITE DESCRIPTION
-%%
-%% The test case function spawns two controlling processes: Starter and Receiver.
-%% Starter spawns a number of prio A and a number of prio B test processes. Each
-%% test process loops for a number of times, sends a report to the Receiver, then
-%% loops again. For each report, the Receiver increases a counter that corresponds
-%% to the priority of the sender. After a certain amount of time, the Receiver
-%% sends the collected data to the main test process and waits for the test case
-%% to terminate. From this data, it's possible to calculate the average run time
-%% relationship between the prio A and B test processes.
-%%
-%% Note that in order to be able to run tests with high or max prio test processes, 
-%% the main test process and the Receiver needs to run at max prio, or they will
-%% be starved by the test processes. The controlling processes must not wait for
-%% messages from a normal (or low) prio process while max or high prio test processes
-%% are running (which happens e.g. if an io function is called).
-%%-----------------------------------------------------------------------------------
-
-init_per_testcase(_Case, Config) ->
-    %% main test process needs max prio
-    Prio = process_flag(priority, max),
-    MS = erlang:system_flag(multi_scheduling, block_normal),
-    [{prio,Prio},{multi_scheduling, MS}|Config].
-
-end_per_testcase(_Case, Config) ->
-    erlang:system_flag(multi_scheduling, unblock_normal),
-    Prio=proplists:get_value(prio, Config),
-    process_flag(priority, Prio),
-    ok.
-
-ok(Config) when is_list(Config) ->
-    case proplists:get_value(multi_scheduling, Config) of
-        blocked ->
-            {comment,
-             "Multi-scheduling blocked during test. This testcase was not "
-             "written to work with multiple schedulers."};
-        _ -> ok
-    end.
-
-%% Run equal number of low and normal prio processes.
-
-equal(Config) when is_list(Config) ->
-    Self = self(),
-
-    %% specify number of test processes to run
-    Normal = {normal,500},
-    Low    = {low,500},
-
-    %% specify time of test (in seconds)
-    Time = 30,
-
-    %% start controllers
-    Receiver = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, Normal, Low) end),
-    Starter =
-    spawn(fun() -> starter(Normal, Low, Receiver) end),
-
-    %% receive test data from Receiver
-    {NRs,NAvg,LRs,LAvg,Ratio} = 
-    receive
-        {Receiver,Res} -> Res
-    end,
-
-    %% stop controllers and test processes
-    exit(Starter, kill),
-    exit(Receiver, kill),
-
-    io:format("Reports: ~w normal (~w/proc), ~w low (~w/proc). Ratio: ~w~n", 
-              [NRs,NAvg,LRs,LAvg,Ratio]),
-
-    %% runtime ratio between normal and low should be ~8
-    if Ratio < 7.5 ; Ratio > 8.5 ->	
-           ct:fail({bad_ratio,Ratio});
-       true ->
-           ok(Config)
-    end.
-
-
-%% Run many low and few normal prio processes.
-
-many_low(Config) when is_list(Config) ->
-    Self = self(),
-    Normal = {normal,1},
-    Low    = {low,1000},
-
-    %% specify time of test (in seconds)
-    Time = 30,
-
-    Receiver = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, Normal, Low) end),
-    Starter =
-    spawn(fun() -> starter(Normal, Low, Receiver) end),
-    {NRs,NAvg,LRs,LAvg,Ratio} = 
-    receive
-        {Receiver,Res} -> Res
-    end,
-    exit(Starter, kill),
-    exit(Receiver, kill),
-    io:format("Reports: ~w normal (~w/proc), ~w low (~w/proc). Ratio: ~w~n", 
-              [NRs,NAvg,LRs,LAvg,Ratio]),
-    if Ratio < 7.5 ; Ratio > 8.5 ->
-           ct:fail({bad_ratio,Ratio});
-       true ->
-           ok(Config)
-    end.
-
-
-%% Run few low and many normal prio processes.
-
-few_low(Config) when is_list(Config) ->
-    Self = self(),
-    Normal = {normal,1000},
-    Low    = {low,1},
-
-    %% specify time of test (in seconds)
-    Time = 30,
-
-    Receiver = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, Normal, Low) end),
-    Starter =
-    spawn(fun() -> starter(Normal, Low, Receiver) end),
-    {NRs,NAvg,LRs,LAvg,Ratio} = 
-    receive
-        {Receiver,Res} -> Res
-    end,
-    exit(Starter, kill),
-    exit(Receiver, kill),
-    io:format("Reports: ~w normal (~w/proc), ~w low (~w/proc). Ratio: ~w~n", 
-              [NRs,NAvg,LRs,LAvg,Ratio]),
-    if Ratio < 7.0 ; Ratio > 8.5 ->
-           ct:fail({bad_ratio,Ratio});
-       true ->
-           ok(Config)
-    end.
-
-
-%% Run max prio processes and verify they get at least as much 
-%% runtime as high, normal and low.
-
-max(Config) when is_list(Config) ->
-    max = process_flag(priority, max),		% should already be max (init_per_tc)
-    Self = self(),
-    Max    = {max,2},
-    High   = {high,2},
-    Normal = {normal,100},
-    Low    = {low,100},
-
-    %% specify time of test (in seconds)
-    Time = 30,
-
-    Receiver1 = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, Max, High) end),
-    Starter1 =
-    spawn(fun() -> starter(Max, High, Receiver1) end),
-    {M1Rs,M1Avg,HRs,HAvg,Ratio1} = 
-    receive
-        {Receiver1,Res1} -> Res1
-    end,
-    exit(Starter1, kill),
-    exit(Receiver1, kill),
-    io:format("Reports: ~w max (~w/proc), ~w high (~w/proc). Ratio: ~w~n", 
-              [M1Rs,M1Avg,HRs,HAvg,Ratio1]),
-    if Ratio1 < 1.0 ->
-           ct:fail({bad_ratio,Ratio1});
-       true ->
-           ok(Config)
-    end,
-
-    Receiver2 = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, Max, Normal) end),
-    Starter2 =
-    spawn(fun() -> starter(Max, Normal, Receiver2) end),
-    {M2Rs,M2Avg,NRs,NAvg,Ratio2} = 
-    receive
-        {Receiver2,Res2} -> Res2
-    end,
-    exit(Starter2, kill),
-    exit(Receiver2, kill),
-    io:format("Reports: ~w max (~w/proc), ~w normal (~w/proc). Ratio: ~w~n", 
-              [M2Rs,M2Avg,NRs,NAvg,Ratio2]),
-    if Ratio2 < 1.0 ->
-           ct:fail({bad_ratio,Ratio2});
-       true ->
-           ok
-    end,
-
-    Receiver3 = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, Max, Low) end),
-    Starter3 =
-    spawn(fun() -> starter(Max, Low, Receiver3) end),
-    {M3Rs,M3Avg,LRs,LAvg,Ratio3} = 
-    receive
-        {Receiver3,Res3} -> Res3
-    end,
-    exit(Starter3, kill),
-    exit(Receiver3, kill),
-    io:format("Reports: ~w max (~w/proc), ~w low (~w/proc). Ratio: ~w~n", 
-              [M3Rs,M3Avg,LRs,LAvg,Ratio3]),
-    if Ratio3 < 1.0 ->
-           ct:fail({bad_ratio,Ratio3});
-       true ->
-           ok(Config)
-    end.
-
-
-%% Run high prio processes and verify they get at least as much 
-%% runtime as normal and low.
-
-high(Config) when is_list(Config) ->
-    max = process_flag(priority, max),		% should already be max (init_per_tc)
-    Self = self(),
-    High   = {high,2},
-    Normal = {normal,100},
-    Low    = {low,100},
-
-    %% specify time of test (in seconds)
-    Time = 30,
-
-    Receiver1 = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, High, Normal) end),
-    Starter1 =
-    spawn(fun() -> starter(High, Normal, Receiver1) end),
-    {H1Rs,H1Avg,NRs,NAvg,Ratio1} = 
-    receive
-        {Receiver1,Res1} -> Res1
-    end,
-    exit(Starter1, kill),
-    exit(Receiver1, kill),
-    io:format("Reports: ~w high (~w/proc), ~w normal (~w/proc). Ratio: ~w~n", 
-              [H1Rs,H1Avg,NRs,NAvg,Ratio1]),
-    if Ratio1 < 1.0 ->
-           ct:fail({bad_ratio,Ratio1});
-       true ->
-           ok
-    end,
-
-    Receiver2 = 
-    spawn(fun() -> receiver(erlang:monotonic_time(), Time, Self, High, Low) end),
-    Starter2 =
-    spawn(fun() -> starter(High, Low, Receiver2) end),
-    {H2Rs,H2Avg,LRs,LAvg,Ratio2} = 
-    receive
-        {Receiver2,Res2} -> Res2
-    end,
-    exit(Starter2, kill),
-    exit(Receiver2, kill),
-    io:format("Reports: ~w high (~w/proc), ~w low (~w/proc). Ratio: ~w~n", 
-              [H2Rs,H2Avg,LRs,LAvg,Ratio2]),
-    if Ratio2 < 1.0 ->
-           ct:fail({bad_ratio,Ratio2});
-       true ->
-           ok(Config)
-    end.
-
-
-%%-----------------------------------------------------------------------------------
-%% Controller processes and help functions
-%%-----------------------------------------------------------------------------------
-
-receiver(T0, TimeSec, Main, {P1,P1N}, {P2,P2N}) ->
-    %% prio should be max so that mailbox doesn't overflow
-    process_flag(priority, max),
-    receiver(T0, TimeSec*1000, Main, P1,P1N,0, P2,P2N,0, 100000).
-
-%% uncomment lines below to get life sign (debug)
-receiver(T0, Time, Main, P1,P1N,P1Rs, P2,P2N,P2Rs, 0) ->
-    %    T = erlang:convert_time_unit(erlang:monotonic_time() - T0, native, millisecond),
-    %    erlang:display({round(T/1000),P1Rs,P2Rs}),
-    receiver(T0, Time, Main, P1,P1N,P1Rs, P2,P2N,P2Rs, 100000);
-
-receiver(T0, Time, Main, P1,P1N,P1Rs, P2,P2N,P2Rs, C) ->
-    Remain = Time - erlang:convert_time_unit(erlang:monotonic_time() - T0,
-                                             native, millisecond), % test time remaining
-    Remain1 = if Remain < 0 ->
-                     0;
-                 true ->
-                     Remain
-              end,
-    {P1Rs1,P2Rs1} = 
-    receive
-        {_Pid,P1} ->			% report from a P1 process
-            {P1Rs+1,P2Rs};
-        {_Pid,P2} ->			% report from a P2 process
-            {P1Rs,P2Rs+1}
-    after Remain1 ->
-              {P1Rs,P2Rs}
-    end,
-    if Remain > 0 ->				% keep going
-           receiver(T0, Time, Main, P1,P1N,P1Rs1, P2,P2N,P2Rs1, C-1);
-       true ->					% finish
-           %% calculate results and send to main test process
-           P1Avg = P1Rs1/P1N,
-           P2Avg = P2Rs1/P2N,
-           Ratio = if P2Avg < 1.0 -> P1Avg;
-                      true -> P1Avg/P2Avg
-                   end,
-           Main ! {self(),{P1Rs1,round(P1Avg),P2Rs1,round(P2Avg),Ratio}},
-           flush_loop()
-    end.
-
-starter({P1,P1N}, {P2,P2N}, Receiver) ->
-    %% start N1 processes with prio P1
-    start_p(P1, P1N, Receiver),
-    %% start N2 processes with prio P2
-    start_p(P2, P2N, Receiver),
-    erlang:display({started,P1N+P2N}),
-    flush_loop().
-
-start_p(_, 0, _) ->
-    ok;
-start_p(Prio, N, Receiver) ->
-    spawn_link(fun() -> p(Prio, Receiver) end),
-    start_p(Prio, N-1, Receiver).
-
-p(Prio, Receiver) ->
-    %% set process priority
-    process_flag(priority, Prio),
-    p_loop(0, Prio, Receiver).
-
-p_loop(100, Prio, Receiver) ->
-    receive after 0 -> ok end,
-    %% if Receiver gone, we're done
-    case is_process_alive(Receiver) of
-        false -> exit(bye);
-        true -> ok
-    end,
-    %% send report
-    Receiver ! {self(),Prio},
-    p_loop(0, Prio, Receiver);
-
-p_loop(N, Prio, Receiver) ->
-    p_loop(N+1, Prio, Receiver).
-
-
-flush_loop() ->
-    receive _ ->
-                ok
-    end,
-    flush_loop().