ose: Remove all code related to the OSE port

The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.

5 files changed, 1385 insertions, 37 deletions

diff --git a/erts/etc/unix/run_erl.c b/erts/etc/unix/run_erl.c
index c8414030ca..44efb975ba 100644
--- a/erts/etc/unix/run_erl.c
+++ b/erts/etc/unix/run_erl.c
@@ -1,7 +1,7 @@
 /*
  * %CopyrightBegin%
  * 
- * Copyright Ericsson AB 1996-2013. All Rights Reserved.
+ * Copyright Ericsson AB 1996-2015. All Rights Reserved.
  * 
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -41,13 +41,11 @@
 #ifdef HAVE_CONFIG_H
 #  include "config.h"
 #endif
-
 #ifdef HAVE_WORKING_POSIX_OPENPT
 #ifndef _XOPEN_SOURCE
 #define _XOPEN_SOURCE 600 
 #endif
 #endif
-
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <sys/stat.h>
@@ -65,6 +63,11 @@
 #include <dirent.h>
 #include <termios.h>
 #include <time.h>
+
+#ifdef __ANDROID__
+#  include <termios.h>
+#endif
+
 #ifdef HAVE_SYSLOG_H
 #  include <syslog.h>
 #endif
@@ -84,25 +87,81 @@
 #  include <stropts.h>
 #endif
 
-#include "run_erl_common.h"
+#include "run_erl.h"
 #include "safe_string.h"    /* sn_printf, strn_cpy, strn_cat, etc */
 
+#ifdef O_NONBLOCK
+#  define DONT_BLOCK_PLEASE O_NONBLOCK
+#else
+#  define DONT_BLOCK_PLEASE O_NDELAY
+#  ifndef EAGAIN
+#    define EAGAIN -3898734
+#  endif
+#endif
+
+#define noDEBUG
+
+#define DEFAULT_LOG_GENERATIONS 5
+#define LOG_MAX_GENERATIONS     1000      /* No more than 1000 log files */
+#define LOG_MIN_GENERATIONS     2         /* At least two to switch between */
+#define DEFAULT_LOG_MAXSIZE     100000
+#define LOG_MIN_MAXSIZE         1000      /* Smallast value for changing log file */
+#define LOG_STUBNAME            "erlang.log."
+#define LOG_PERM                0664
+#define DEFAULT_LOG_ACTIVITY_MINUTES    5
+#define DEFAULT_LOG_ALIVE_MINUTES       15
+#define DEFAULT_LOG_ALIVE_FORMAT        "%a %b %e %T %Z %Y"
+#define ALIVE_BUFFSIZ                   256
+
+#define PERM            0600
+#define STATUSFILENAME  "/run_erl.log"
+#define PIPE_STUBNAME   "erlang.pipe"
+#define PIPE_STUBLEN    strlen(PIPE_STUBNAME)
+
+#ifndef FILENAME_MAX
+#define FILENAME_MAX 250
+#endif
+
+#ifndef O_SYNC
+#define O_SYNC 0
+#define USE_FSYNC 1
+#endif
+
 #define MAX(x,y)  ((x) > (y) ? (x) : (y))
 
+#define FILENAME_BUFSIZ FILENAME_MAX
+
 /* prototypes */
 static void usage(char *);
+static int create_fifo(char *name, int perm);
 static int open_pty_master(char **name, int *sfd);
 static int open_pty_slave(char *name);
 static void pass_on(pid_t);
 static void exec_shell(char **);
+static void status(const char *format,...);
+static void error_logf(int priority, int line, const char *format,...);
 static void catch_sigchild(int);
+static int next_log(int log_num);
+static int prev_log(int log_num);
+static int find_next_log_num(void);
+static int open_log(int log_num, int flags);
+static void write_to_log(int* lfd, int* log_num, char* buf, int len);
 static void daemon_init(void);
+static char *simple_basename(char *path);
 static void init_outbuf(void);
 static int outbuf_size(void);
 static void clear_outbuf(void);
 static char* outbuf_first(void);
 static void outbuf_delete(int bytes);
 static void outbuf_append(const char* bytes, int n);
+static int write_all(int fd, const char* buf, int len);
+static int extract_ctrl_seq(char* buf, int len);
+static void set_window_size(unsigned col, unsigned row);
+
+static ssize_t sf_write(int fd, const void *buffer, size_t len);
+static ssize_t sf_read(int fd, void *buffer, size_t len);
+static int sf_open(const char *path, int flags, mode_t mode);
+static int sf_close(int fd);
 
 #ifdef DEBUG
 static void show_terminal_settings(struct termios *t);
@@ -110,11 +169,20 @@ static void show_terminal_settings(struct termios *t);
 
 /* static data */
 static char fifo1[FILENAME_BUFSIZ], fifo2[FILENAME_BUFSIZ];
+static char statusfile[FILENAME_BUFSIZ];
+static char log_dir[FILENAME_BUFSIZ];
 static char pipename[FILENAME_BUFSIZ];
 static FILE *stdstatus = NULL;
+static int log_generations = DEFAULT_LOG_GENERATIONS;
+static int log_maxsize     = DEFAULT_LOG_MAXSIZE;
+static int log_alive_minutes = DEFAULT_LOG_ALIVE_MINUTES;
+static int log_activity_minutes = DEFAULT_LOG_ACTIVITY_MINUTES;
+static int log_alive_in_gmt = 0;
+static char log_alive_format[ALIVE_BUFFSIZ+1];
 static int run_daemon = 0;
 static char *program_name;
 static int mfd; /* master pty fd */
+static unsigned protocol_ver = RUN_ERL_LO_VER; /* assume lowest to begin with */
 
 /*
  * Output buffer.
@@ -145,13 +213,29 @@ static char* outbuf_in;
                                   LOG_PID|LOG_CONS|LOG_NOWAIT,LOG_USER)
 #endif
 
+#define ERROR0(Prio,Format) error_logf(Prio,__LINE__,Format"\n")
+#define ERROR1(Prio,Format,A1) error_logf(Prio,__LINE__,Format"\n",A1)
+#define ERROR2(Prio,Format,A1,A2) error_logf(Prio,__LINE__,Format"\n",A1,A2)
+
+#ifdef HAVE_STRERROR
+#    define ADD_ERRNO(Format) "errno=%d '%s'\n"Format"\n",errno,strerror(errno)
+#else
+#    define ADD_ERRNO(Format) "errno=%d\n"Format"\n",errno
+#endif
+#define ERRNO_ERR0(Prio,Format) error_logf(Prio,__LINE__,ADD_ERRNO(Format))
+#define ERRNO_ERR1(Prio,Format,A1) error_logf(Prio,__LINE__,ADD_ERRNO(Format),A1)
+
+
 int main(int argc, char **argv)
 {
   int childpid;
   int sfd = -1;
-  char *ptyslave=NULL;
+  int fd;
+  char *p, *ptyslave=NULL;
   int i = 1;
   int off_argv;
+  int calculated_pipename = 0;
+  int highest_pipe_num = 0;
 
   program_name = argv[0];
 
@@ -169,16 +253,122 @@ int main(int argc, char **argv)
 
   off_argv = i;
   strn_cpy(pipename, sizeof(pipename), argv[i++]);
-
-  erts_run_erl_log_init(run_daemon,argv[i]);
+  strn_cpy(log_dir, sizeof(log_dir), argv[i]);
+  strn_cpy(statusfile, sizeof(statusfile), log_dir);
+  strn_cat(statusfile, sizeof(statusfile), STATUSFILENAME);
 
 #ifdef DEBUG
-  erts_run_erl_log_status("%s: pid is : %d\n", argv[0], getpid());
+  status("%s: pid is : %d\n", argv[0], getpid());
 #endif
 
-  /* Open read and write fifo */
-  if (erts_run_erl_open_fifo(pipename,fifo1,fifo2))
-    exit(1);
+  /* Get values for LOG file handling from the environment */
+  if ((p = getenv("RUN_ERL_LOG_ALIVE_MINUTES"))) {
+      log_alive_minutes = atoi(p);
+      if (!log_alive_minutes) {
+	  ERROR1(LOG_ERR,"Minimum value for RUN_ERL_LOG_ALIVE_MINUTES is 1 "
+		 "(current value is %s)",p);
+      }
+      log_activity_minutes = log_alive_minutes / 3;
+      if (!log_activity_minutes) {
+	  ++log_activity_minutes;
+      }
+  }
+  if ((p = getenv("RUN_ERL_LOG_ACTIVITY_MINUTES"))) {
+     log_activity_minutes = atoi(p);
+      if (!log_activity_minutes) {
+	  ERROR1(LOG_ERR,"Minimum value for RUN_ERL_LOG_ACTIVITY_MINUTES is 1 "
+		 "(current value is %s)",p);
+      }
+  } 
+  if ((p = getenv("RUN_ERL_LOG_ALIVE_FORMAT"))) {
+      if (strlen(p) > ALIVE_BUFFSIZ) {
+	  ERROR1(LOG_ERR, "RUN_ERL_LOG_ALIVE_FORMAT can contain a maximum of "
+		 "%d characters", ALIVE_BUFFSIZ);
+      }
+      strn_cpy(log_alive_format, sizeof(log_alive_format), p);
+  } else {
+      strn_cpy(log_alive_format, sizeof(log_alive_format), DEFAULT_LOG_ALIVE_FORMAT);
+  }
+  if ((p = getenv("RUN_ERL_LOG_ALIVE_IN_UTC")) && strcmp(p,"0")) {
+      ++log_alive_in_gmt;
+  }
+  if ((p = getenv("RUN_ERL_LOG_GENERATIONS"))) {
+    log_generations = atoi(p);
+    if (log_generations < LOG_MIN_GENERATIONS)
+      ERROR1(LOG_ERR,"Minimum RUN_ERL_LOG_GENERATIONS is %d", LOG_MIN_GENERATIONS);
+    if (log_generations > LOG_MAX_GENERATIONS)
+      ERROR1(LOG_ERR,"Maximum RUN_ERL_LOG_GENERATIONS is %d", LOG_MAX_GENERATIONS);
+  }
+
+  if ((p = getenv("RUN_ERL_LOG_MAXSIZE"))) {
+    log_maxsize = atoi(p);
+    if (log_maxsize < LOG_MIN_MAXSIZE)
+      ERROR1(LOG_ERR,"Minimum RUN_ERL_LOG_MAXSIZE is %d", LOG_MIN_MAXSIZE);
+  }
+
+  /*
+   * Create FIFOs and open them 
+   */
+
+  if(*pipename && pipename[strlen(pipename)-1] == '/') {
+    /* The user wishes us to find a unique pipe name in the specified */
+    /* directory */
+    DIR *dirp;
+    struct dirent *direntp;
+
+    calculated_pipename = 1;
+    dirp = opendir(pipename);
+    if(!dirp) {
+      ERRNO_ERR1(LOG_ERR,"Can't access pipe directory '%s'.", pipename);
+      exit(1);
+    }
+
+    /* Check the directory for existing pipes */
+    
+    while((direntp=readdir(dirp)) != NULL) {
+      if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) {
+	int num = atoi(direntp->d_name+PIPE_STUBLEN+1);
+	if(num > highest_pipe_num)
+	  highest_pipe_num = num;
+      }
+    }	
+    closedir(dirp);
+    strn_catf(pipename, sizeof(pipename), "%s.%d",
+	      PIPE_STUBNAME, highest_pipe_num+1);
+  } /* if */
+
+  for(;;) {
+      /* write FIFO - is read FIFO for `to_erl' program */
+      strn_cpy(fifo1, sizeof(fifo1), pipename);
+      strn_cat(fifo1, sizeof(fifo1), ".r");
+      if (create_fifo(fifo1, PERM) < 0) {
+	  ERRNO_ERR1(LOG_ERR,"Cannot create FIFO %s for writing.", fifo1);
+	  exit(1);
+      }
+      
+      /* read FIFO - is write FIFO for `to_erl' program */
+      strn_cpy(fifo2, sizeof(fifo2), pipename);
+      strn_cat(fifo2, sizeof(fifo2), ".w");
+      
+      /* Check that nobody is running run_erl already */
+      if ((fd = sf_open(fifo2, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) {
+	  /* Open as client succeeded -- run_erl is already running! */
+	  sf_close(fd);
+	  if (calculated_pipename) {
+	      ++highest_pipe_num;
+	      strn_catf(pipename, sizeof(pipename), "%s.%d",
+			PIPE_STUBNAME, highest_pipe_num+1);
+	      continue;
+	  } 
+	  fprintf(stderr, "Erlang already running on pipe %s.\n", pipename);
+	  exit(1);
+      }
+      if (create_fifo(fifo2, PERM) < 0) { 
+	  ERRNO_ERR1(LOG_ERR,"Cannot create FIFO %s for reading.", fifo2);
+	  exit(1);
+      }
+      break;
+  }
 
   /*
    * Open master pseudo-terminal
@@ -250,7 +440,7 @@ int main(int argc, char **argv)
     sf_close(2);
 
     if (dup(sfd) != 0 || dup(sfd) != 1 || dup(sfd) != 2) {
-      erts_run_erl_log_status("Cannot dup\n");
+      status("Cannot dup\n");
     }
     sf_close(sfd);
     exec_shell(argv+off_argv); /* exec_shell expects argv[2] to be */
@@ -293,7 +483,9 @@ static void pass_on(pid_t childpid)
     struct timeval timeout;
     time_t last_activity;
     char buf[BUFSIZ];
-    int rfd, wfd=0;
+    char log_alive_buffer[ALIVE_BUFFSIZ+1];
+    int lognum;
+    int rfd, wfd=0, lfd=0;
     int maxfd;
     int ready;
     int got_some = 0; /* from to_erl */
@@ -308,12 +500,13 @@ static void pass_on(pid_t childpid)
     }
     
 #ifdef DEBUG
-    erts_run_erl_log_status("run_erl: %s opened for reading\n", fifo2);
+    status("run_erl: %s opened for reading\n", fifo2);
 #endif
     
     /* Open the log file */
     
-    erts_run_erl_log_open();
+    lognum = find_next_log_num();
+    lfd = open_log(lognum, O_RDWR|O_APPEND|O_CREAT|O_SYNC);
     
     /* Enter the work loop */
     
@@ -332,8 +525,7 @@ static void pass_on(pid_t childpid)
 	    writefds_ptr = &writefds;
 	}
 	time(&last_activity);
-	/* don't assume old BSD bug */
-	timeout.tv_sec  = erts_run_erl_log_alive_minutes()*60;
+	timeout.tv_sec  = log_alive_minutes*60; /* don't assume old BSD bug */
 	timeout.tv_usec = 0;
 	ready = select(maxfd + 1, &readfds, writefds_ptr, NULL, &timeout);
 	if (ready < 0) {
@@ -363,7 +555,28 @@ static void pass_on(pid_t childpid)
 
 	    /* Check how long time we've been inactive */
 	    time(&now);
-	    erts_run_erl_log_activity(!ready,now,last_activity);
+	    if(!ready || now - last_activity > log_activity_minutes*60) {
+		/* Either a time out: 15 minutes without action, */
+		/* or something is coming in right now, but it's a long time */
+		/* since last time, so let's write a time stamp this message */
+		struct tm *tmptr;
+		if (log_alive_in_gmt) {
+		    tmptr = gmtime(&now);
+		} else {
+		    tmptr = localtime(&now);
+		}
+		if (!strftime(log_alive_buffer, ALIVE_BUFFSIZ, log_alive_format,
+			      tmptr)) {
+		    strn_cpy(log_alive_buffer, sizeof(log_alive_buffer),
+			     "(could not format time in 256 positions "
+			     "with current format string.)");
+		}
+		log_alive_buffer[ALIVE_BUFFSIZ] = '\0';
+
+		sn_printf(buf, sizeof(buf), "\n===== %s%s\n", 
+			  ready?"":"ALIVE ", log_alive_buffer);
+		write_to_log(&lfd, &lognum, buf, strlen(buf));
+	    }
 	}
 
 	/*
@@ -398,7 +611,7 @@ static void pass_on(pid_t childpid)
 	 */
 	if (FD_ISSET(mfd, &readfds)) {
 #ifdef DEBUG
-	    erts_run_erl_log_status("Pty master read; ");
+	    status("Pty master read; ");
 #endif
 	    if ((len = sf_read(mfd, buf, BUFSIZ)) <= 0) {
 		sf_close(rfd);
@@ -416,7 +629,7 @@ static void pass_on(pid_t childpid)
 		exit(0);
 	    }
 
-	    erts_run_erl_log_write(buf, len);
+	    write_to_log(&lfd, &lognum, buf, len);
 
 	    /*
 	     * Save in the output queue.
@@ -432,7 +645,7 @@ static void pass_on(pid_t childpid)
 	 */
 	if (FD_ISSET(rfd, &readfds)) {
 #ifdef DEBUG
-	    erts_run_erl_log_status("FIFO read; ");
+	    status("FIFO read; ");
 #endif
 	    if ((len = sf_read(rfd, buf, BUFSIZ)) < 0) {
 		sf_close(rfd);
@@ -461,7 +674,7 @@ static void pass_on(pid_t childpid)
 		     * should succeed. But in case of error, we just ignore it.
 		     */
 		    if ((wfd = sf_open(fifo1, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) {
-			erts_run_erl_log_status("Client expected on FIFO %s, but can't open (len=%d)\n",
+			status("Client expected on FIFO %s, but can't open (len=%d)\n",
 			       fifo1, len);
 			sf_close(rfd);
 			rfd = sf_open(fifo2, O_RDONLY|DONT_BLOCK_PLEASE, 0);
@@ -473,7 +686,7 @@ static void pass_on(pid_t childpid)
 		    } 
 		    else {
 #ifdef DEBUG
-			erts_run_erl_log_status("run_erl: %s opened for writing\n", fifo1);
+			status("run_erl: %s opened for writing\n", fifo1);
 #endif
 		    }
 		}
@@ -489,15 +702,14 @@ static void pass_on(pid_t childpid)
 
 		/* Write the message */
 #ifdef DEBUG
-		erts_run_erl_log_status("Pty master write; ");
+		status("Pty master write; ");
 #endif
-		len = erts_run_erl_extract_ctrl_seq(buf, len, mfd);
+		len = extract_ctrl_seq(buf, len);
 
 		if(len==1 && buf[0] == '\003') {
 		    kill(childpid,SIGINT);
-		}
-		else if (len>0 && erts_run_erl_write_all(mfd, buf, len) != len)
-		  {
+		} 
+		else if (len>0 && write_all(mfd, buf, len) != len) {
 		    ERRNO_ERR0(LOG_ERR,"Error in writing to terminal.");
 		    sf_close(rfd);
 		    if(wfd) sf_close(wfd);
@@ -506,7 +718,7 @@ static void pass_on(pid_t childpid)
 		}
 	    }
 #ifdef DEBUG
-	    erts_run_erl_log_status("OK\n");
+	    status("OK\n");
 #endif
 	}
     }
@@ -516,6 +728,173 @@ static void catch_sigchild(int sig)
 {
 }
 
+/*
+ * next_log:
+ * Returns the index number that follows the given index number.
+ * (Wrapping after log_generations)
+ */
+static int next_log(int log_num) {
+  return log_num>=log_generations?1:log_num+1;
+}
+
+/*
+ * prev_log:
+ * Returns the index number that precedes the given index number.
+ * (Wrapping after log_generations)
+ */
+static int prev_log(int log_num) {
+  return log_num<=1?log_generations:log_num-1;
+}
+
+/*
+ * find_next_log_num()
+ * Searches through the log directory to check which logs that already
+ * exist. It finds the "hole" in the sequence, and returns the index
+ * number for the last log in the log sequence. If there is no hole, index
+ * 1 is returned.
+ */
+static int find_next_log_num(void) {
+  int i, next_gen, log_gen;
+  DIR *dirp;
+  struct dirent *direntp;
+  int log_exists[LOG_MAX_GENERATIONS+1];
+  int stub_len = strlen(LOG_STUBNAME);
+
+  /* Initialize exiting log table */
+
+  for(i=log_generations; i>=0; i--)
+    log_exists[i] = 0;
+  dirp = opendir(log_dir);
+  if(!dirp) {
+    ERRNO_ERR1(LOG_ERR,"Can't access log directory '%s'", log_dir);
+    exit(1);
+  }
+
+  /* Check the directory for existing logs */
+
+  while((direntp=readdir(dirp)) != NULL) {
+    if(strncmp(direntp->d_name,LOG_STUBNAME,stub_len)==0) {
+      int num = atoi(direntp->d_name+stub_len);
+      if(num < 1 || num > log_generations)
+	continue;
+      log_exists[num] = 1;
+    }
+  }	
+  closedir(dirp);
+
+  /* Find out the next available log file number */
+
+  next_gen = 0;
+  for(i=log_generations; i>=0; i--) {
+    if(log_exists[i])
+      if(next_gen)
+	break;
+      else 
+	;
+    else
+      next_gen = i;
+  }
+
+  /* Find out the current log file number */
+
+  if(next_gen)
+    log_gen = prev_log(next_gen);
+  else
+    log_gen = 1;
+
+  return log_gen;
+} /* find_next_log_num() */
+
+/* open_log()
+ * Opens a log file (with given index) for writing. Writing may be
+ * at the end or a trucnating write, according to flags.
+ * A LOGGING STARTED and time stamp message is inserted into the log file
+ */
+static int open_log(int log_num, int flags)
+{
+  char buf[FILENAME_MAX];
+  time_t now;
+  struct tm *tmptr;
+  char log_buffer[ALIVE_BUFFSIZ+1];
+  int lfd;
+
+  /* Remove the next log (to keep a "hole" in the log sequence) */
+  sn_printf(buf, sizeof(buf), "%s/%s%d",
+	    log_dir, LOG_STUBNAME, next_log(log_num));
+  unlink(buf);
+
+  /* Create or continue on the current log file */
+  sn_printf(buf, sizeof(buf), "%s/%s%d", log_dir, LOG_STUBNAME, log_num);
+  if((lfd = sf_open(buf, flags, LOG_PERM))<0){
+      ERRNO_ERR1(LOG_ERR,"Can't open log file '%s'.", buf);
+    exit(1);
+  }
+
+  /* Write a LOGGING STARTED and time stamp into the log file */
+  time(&now);
+  if (log_alive_in_gmt) {
+      tmptr = gmtime(&now);
+  } else {
+      tmptr = localtime(&now);
+  }
+  if (!strftime(log_buffer, ALIVE_BUFFSIZ, log_alive_format,
+		tmptr)) {
+      strn_cpy(log_buffer, sizeof(log_buffer),
+	      "(could not format time in 256 positions "
+	      "with current format string.)");
+  }
+  log_buffer[ALIVE_BUFFSIZ] = '\0';
+
+  sn_printf(buf, sizeof(buf), "\n=====\n===== LOGGING STARTED %s\n=====\n",
+	    log_buffer);
+  if (write_all(lfd, buf, strlen(buf)) < 0)
+      status("Error in writing to log.\n");
+
+#if USE_FSYNC
+  fsync(lfd);
+#endif
+
+  return lfd;
+}
+
+/* write_to_log()
+ * Writes a message to a log file. If the current log file is full,
+ * a new log file is opened.
+ */
+static void write_to_log(int* lfd, int* log_num, char* buf, int len)
+{
+  int size;
+
+  /* Decide if new logfile needed, and open if so */
+  
+  size = lseek(*lfd,0,SEEK_END);
+  if(size+len > log_maxsize) {
+    sf_close(*lfd);
+    *log_num = next_log(*log_num);
+    *lfd = open_log(*log_num, O_RDWR|O_CREAT|O_TRUNC|O_SYNC); 
+  }
+
+  /* Write to log file */
+
+  if (write_all(*lfd, buf, len) < 0) {
+    status("Error in writing to log.\n");
+  }
+
+#if USE_FSYNC
+  fsync(*lfd);
+#endif
+}
+
+/* create_fifo()
+ * Creates a new fifo with the given name and permission.
+ */
+static int create_fifo(char *name, int perm)
+{
+  if ((mkfifo(name, perm) < 0) && (errno != EEXIST))
+    return -1;
+  return 0;
+}
+
 
 /* open_pty_master()
  * Find a master device, open and return fd and slave device name.
@@ -712,9 +1091,9 @@ static void exec_shell(char **argv)
   else
     argv[0] = sh;
   argv[1] = "-c";
-  erts_run_erl_log_status("Args before exec of shell:\n");
+  status("Args before exec of shell:\n");
   for (vp = argv, i = 0; *vp; vp++, i++)
-    erts_run_erl_log_status("argv[%d] = %s\n", i, *vp);
+    status("argv[%d] = %s\n", i, *vp);
   if (stdstatus) {
       fclose(stdstatus);
   }
@@ -725,6 +1104,26 @@ static void exec_shell(char **argv)
   ERRNO_ERR0(LOG_ERR,"Could not execv");
 }
 
+/* status()
+ * Prints the arguments to a status file
+ * Works like printf (see vfrpintf)
+ */
+static void status(const char *format,...)
+{
+  va_list args;
+  time_t now;
+
+  if (stdstatus == NULL)
+    stdstatus = fopen(statusfile, "w");
+  if (stdstatus == NULL)
+    return;
+  now = time(NULL);
+  fprintf(stdstatus, "run_erl [%d] %s", (int)getpid(), ctime(&now));
+  va_start(args, format);
+  vfprintf(stdstatus, format, args);
+  va_end(args);
+  fflush(stdstatus);
+}
 
 static void daemon_init(void) 
      /* As R Stevens wants it, to a certain extent anyway... */ 
@@ -764,10 +1163,47 @@ static void daemon_init(void)
     run_daemon = 1;
 }
 
+/* error_logf()
+ * Prints the arguments to stderr or syslog
+ * Works like printf (see vfprintf)
+ */
+static void error_logf(int priority, int line, const char *format, ...)
+{
+    va_list args;
+    va_start(args, format);
+
+#ifdef HAVE_SYSLOG_H
+    if (run_daemon) {
+	vsyslog(priority,format,args);
+    }
+    else
+#endif
+    {
+	time_t now = time(NULL);
+	fprintf(stderr, "run_erl:%d [%d] %s", line, (int)getpid(), ctime(&now));
+	vfprintf(stderr, format, args);
+    }
+    va_end(args);
+}	
+
 static void usage(char *pname)
 {
-  fprintf(stderr, "Usage: ");
-  fprintf(stderr, RUN_ERL_USAGE, pname);
+  fprintf(stderr, "Usage: %s (pipe_name|pipe_dir/) log_dir \"command [parameters ...]\"\n", pname);
+  fprintf(stderr, "\nYou may also set the environment variables RUN_ERL_LOG_GENERATIONS\n");
+  fprintf(stderr, "and RUN_ERL_LOG_MAXSIZE to the number of log files to use and the\n");
+  fprintf(stderr, "size of the log file when to switch to the next log file\n");
+}
+
+/* Instead of making sure basename exists, we do our own */
+static char *simple_basename(char *path)
+{
+    char *ptr;
+    for (ptr = path; *ptr != '\0'; ++ptr) {
+	if (*ptr == '/') {
+	    path = ptr + 1;
+	}
+    }
+    return path;
 }
 
 static void init_outbuf(void)
@@ -838,6 +1274,114 @@ static void outbuf_append(const char* buf, int n)
     outbuf_in += n;
 }
 
+/* Call write() until entire buffer has been written or error.
+ * Return len or -1.
+ */
+static int write_all(int fd, const char* buf, int len)
+{
+    int left = len;
+    int written;
+    for (;;) {
+	written = sf_write(fd,buf,left);
+	if (written == left) {
+	    return len;
+	}
+	if (written < 0) {
+	    return -1;
+	}
+	left -= written;
+	buf += written;
+    }
+}
+
+static ssize_t sf_read(int fd, void *buffer, size_t len) {
+    ssize_t n = 0;
+
+    do { n = read(fd, buffer, len); } while (n < 0 && errno == EINTR);
+
+    return n;
+}
+
+static ssize_t sf_write(int fd, const void *buffer, size_t len) {
+    ssize_t n = 0;
+
+    do { n = write(fd, buffer, len); } while (n < 0 && errno == EINTR);
+
+    return n;
+}
+
+static int sf_open(const char *path, int type, mode_t mode) {
+    int fd = 0;
+
+    do { fd = open(path, type, mode); } while(fd < 0 && errno == EINTR);
+
+    return fd;
+}
+static int sf_close(int fd) {
+    int res = 0;
+
+    do { res = close(fd); } while(fd < 0 && errno == EINTR);
+
+    return res;
+}
+/* Extract any control sequences that are ment only for run_erl
+ * and should not be forwarded to the pty.
+ */
+static int extract_ctrl_seq(char* buf, int len)
+{
+    static const char prefix[] = "\033_";
+    static const char suffix[] = "\033\\";
+    char* bufend = buf + len;
+    char* start = buf;
+    char* command;
+    char* end;
+    
+    for (;;) {
+	start = find_str(start, bufend-start, prefix);
+	if (!start) break;
+	
+	command = start + strlen(prefix);
+	end = find_str(command, bufend-command, suffix);
+	if (end) {
+	    unsigned col, row;
+	    if (sscanf(command,"version=%u", &protocol_ver)==1) {
+		/*fprintf(stderr,"to_erl v%u\n", protocol_ver);*/
+	    }
+	    else if (sscanf(command,"winsize=%u,%u", &col, &row)==2) {
+		set_window_size(col,row);
+	    }
+	    else {
+		ERROR2(LOG_ERR, "Ignoring unknown ctrl command '%.*s'\n",
+		       (int)(end-command), command);
+	    }
+	  
+	    /* Remove ctrl sequence from buf */
+	    end += strlen(suffix);
+	    memmove(start, end, bufend-end);
+	    bufend -= end - start;
+	}
+	else {
+	    ERROR2(LOG_ERR, "Missing suffix in ctrl sequence '%.*s'\n",
+		   (int)(bufend-start), start);
+	    break;
+	}
+    }
+    return bufend - buf;
+}
+
+static void set_window_size(unsigned col, unsigned row)
+{
+#ifdef TIOCSWINSZ	
+    struct winsize ws;
+    ws.ws_col = col;
+    ws.ws_row = row;
+    if (ioctl(mfd, TIOCSWINSZ, &ws) < 0) {
+	ERRNO_ERR0(LOG_ERR,"Failed to set window size");
+    }
+#endif
+}
+
+
 #ifdef DEBUG
 
 #define S(x)  ((x) > 0 ? 1 : 0)
diff --git a/erts/etc/unix/run_erl.h b/erts/etc/unix/run_erl.h
new file mode 100644
index 0000000000..cc70a98e52
--- /dev/null
+++ b/erts/etc/unix/run_erl.h
@@ -0,0 +1,31 @@
+/*
+ * %CopyrightBegin%
+ * 
+ * Copyright Ericsson AB 2008-2009. All Rights Reserved.
+ * 
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * 
+ * %CopyrightEnd%
+ */
+
+/*
+ * The protocol version number used between to_erl and run_erl.
+ */
+#define RUN_ERL_HI_VER 1  /* My preferred protocol version */
+#define RUN_ERL_LO_VER 0  /* The lowest version I accept to talk with */
+
+/* Version history:
+ * 0: Older, without version handshake
+ * 1: R12B-3, version handshake + window size ctrl
+ */
+
diff --git a/erts/etc/unix/safe_string.c b/erts/etc/unix/safe_string.c
new file mode 100644
index 0000000000..a5c11d41d8
--- /dev/null
+++ b/erts/etc/unix/safe_string.c
@@ -0,0 +1,124 @@
+/*
+ * %CopyrightBegin%
+ * 
+ * Copyright Ericsson AB 2008-2009. All Rights Reserved.
+ * 
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * 
+ * %CopyrightEnd%
+ */
+/* 
+ * Module: safe_string.c
+ * 
+ * This is a bunch of generic string operation
+ * that are safe regarding buffer overflow.
+ *
+ * All string functions terminate the process with an error message
+ * on buffer overflow.
+ */
+
+#ifdef HAVE_CONFIG_H
+#  include "config.h"
+#endif
+#include "safe_string.h"
+#include <stdio.h>
+#include <string.h>
+#include <stdarg.h>
+#include <stdlib.h>
+
+
+static void string_overflow_handler(const char* format, ...)
+{
+    va_list args;
+    va_start(args, format);
+    vfprintf(stderr,format,args);
+    va_end(args);
+    exit(1);
+}
+
+int vsn_printf(char* dst, size_t size, const char* format, va_list args)
+{
+    int ret = vsnprintf(dst, size, format, args);
+    if (ret >= size || ret < 0) {
+	string_overflow_handler("Buffer truncated '%s'\n",dst);
+    }
+    return ret;
+}
+
+int sn_printf(char* dst, size_t size, const char* format, ...)
+{
+    va_list args;
+    int ret;
+    va_start(args, format);
+    ret = vsn_printf(dst,size,format,args);
+    va_end(args);
+    return ret;
+}
+
+int strn_cpy(char* dst, size_t size, const char* src)
+{
+    return sn_printf(dst,size,"%s",src);
+}
+
+int strn_cat(char* dst, size_t size, const char* src)
+{
+    return strn_catf(dst,size,"%s",src);
+}
+
+int strn_catf(char* dst, size_t size, const char* format, ...)
+{
+    int ret;
+    va_list args;
+#ifdef _GNU_SOURCE
+    int len = strnlen(dst,size);
+#else
+    int len = strlen(dst);
+#endif
+
+    if (len >= size) {
+	string_overflow_handler("Buffer already overflowed '%.*s'\n",
+				size, dst);
+    }
+    va_start(args, format);
+    ret = vsn_printf(dst+len, size-len, format, args);
+    va_end(args);
+    return len+ret;
+}
+
+char* find_str(const char* haystack, int hsize, const char* needle)
+{
+    int i = 0;
+    int nsize = strlen(needle);
+    hsize -= nsize - 1;
+    for (i=0; i<hsize; i++) {
+	if (haystack[i]==needle[0] && strncmp(haystack+i,needle,nsize)==0) {
+	    return (char*)(haystack+i);
+	}
+    }
+    return NULL;
+}
+
+#ifndef HAVE_MEMMOVE
+void* memmove(void *dest, const void *src, size_t n)
+{
+    int i;
+    if (src > dest) {
+	for (i=0; i<n; i++) ((char*)dest)[i] = ((char*)src)[i];
+    }
+    else {
+	for (i=(int)(n-1); i>=0; i--) ((char*)dest)[i] = ((char*)src)[i];
+    }
+    return dest;
+}
+#endif /* HAVE_MEMMOVE */
+
diff --git a/erts/etc/unix/safe_string.h b/erts/etc/unix/safe_string.h
new file mode 100644
index 0000000000..5a471f10de
--- /dev/null
+++ b/erts/etc/unix/safe_string.h
@@ -0,0 +1,66 @@
+/*
+ * %CopyrightBegin%
+ * 
+ * Copyright Ericsson AB 2008-2009. All Rights Reserved.
+ * 
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * 
+ * %CopyrightEnd%
+ */
+/* 
+ * Module: safe_string.h
+ * 
+ * This is an interface to a bunch of generic string operation
+ * that are safe regarding buffer overflow.
+ *
+ * All string functions terminate the process with an error message
+ * on buffer overflow.
+ */
+
+#include <stdio.h>
+#include <stdarg.h>
+
+/* Like vsnprintf()
+ */
+int vsn_printf(char* dst, size_t size, const char* format, va_list args);
+
+/* Like snprintf()
+ */
+int sn_printf(char* dst, size_t size, const char* format, ...);
+
+/* Like strncpy()
+ * Returns length of copied string.
+ */
+int strn_cpy(char* dst, size_t size, const char* src);
+
+/* Almost like strncat()
+ * size is sizeof entire dst buffer.
+ * Returns length of resulting string.
+ */
+int strn_cat(char* dst, size_t size, const char* src);
+
+/* Combination of strncat() and snprintf()
+ * size is sizeof entire dst buffer.
+ * Returns length of resulting string.
+ */
+int strn_catf(char* dst, size_t size, const char* format, ...);
+
+/* Simular to strstr() but search size bytes of haystack
+ * without regard to '\0' characters.
+ */
+char* find_str(const char* haystack, int size, const char* needle);
+
+#ifndef HAVE_MEMMOVE
+void* memmove(void *dest, const void *src, size_t n);
+#endif
+
diff --git a/erts/etc/unix/to_erl.c b/erts/etc/unix/to_erl.c
index 82d3218964..0bd469727c 100644
--- a/erts/etc/unix/to_erl.c
+++ b/erts/etc/unix/to_erl.c
@@ -1,7 +1,7 @@
 /*
  * %CopyrightBegin%
  * 
- * Copyright Ericsson AB 1996-2013. All Rights Reserved.
+ * Copyright Ericsson AB 1996-2015. All Rights Reserved.
  * 
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -17,9 +17,592 @@
  * 
  * %CopyrightEnd%
  */
+/* 
+ * Module: to_erl.c
+ * 
+ * This module implements a process that opens two specified FIFOs, one
+ * for reading and one for writing; reads from its stdin, and writes what
+ * it has read to the write FIF0; reads from the read FIFO, and writes to
+ * its stdout.
+ *
+  ________                            _________ 
+ |        |--<-- pipe.r (fifo1) --<--|         |
+ | to_erl |                          | run_erl | (parent)
+ |________|-->-- pipe.w (fifo2) -->--|_________|
+                                          ^ master pty
+                                          |
+                                          | slave pty
+                                      ____V____ 
+                                     |         |
+                                     |  "erl"  | (child)
+                                     |_________|
+ */
+#ifdef HAVE_CONFIG_H
+#  include "config.h"
+#endif
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <termios.h>
+#include <dirent.h>
+#include <signal.h>
+#include <errno.h>
+#ifdef HAVE_SYS_IOCTL_H
+#  include <sys/ioctl.h>
+#endif
+
+#include "run_erl.h"
+#include "safe_string.h"   /* strn_cpy, strn_catf, sn_printf, etc. */
+
+#if defined(O_NONBLOCK)
+# define DONT_BLOCK_PLEASE O_NONBLOCK
+#else
+# define DONT_BLOCK_PLEASE O_NDELAY
+# if !defined(EAGAIN)
+#  define EAGAIN -3898734
+# endif
+#endif
+
+#ifdef HAVE_STRERROR
+#  define STRERROR(x) strerror(x)
+#else
+#  define STRERROR(x) ""
+#endif
+
+#define noDEBUG
+
+#define PIPE_DIR        "/tmp/"
+#define PIPE_STUBNAME   "erlang.pipe"
+#define PIPE_STUBLEN    strlen(PIPE_STUBNAME)
+
+#ifdef DEBUG
+#define STATUS(s)  { fprintf(stderr, (s)); fflush(stderr); }
+#else
+#define STATUS(s)
+#endif
+
+#ifndef FILENAME_MAX
+#define FILENAME_MAX 250
+#endif
+
+static struct termios tty_smode, tty_rmode;
+static int tty_eof = 0;
+static int recv_sig = 0;
+static int protocol_ver = RUN_ERL_LO_VER; /* assume lowest to begin with */
+
+static int write_all(int fd, const char* buf, int len);
+static int window_size_seq(char* buf, size_t bufsz);
+static int version_handshake(char* buf, int len, int wfd);
+#ifdef DEBUG
+static void show_terminal_settings(struct termios *);
+#endif
+
+static void handle_ctrlc(int sig)
+{
+    /* Reinstall the handler, and signal break flag */
+    signal(SIGINT,handle_ctrlc);
+    recv_sig = SIGINT;
+}  
+
+static void handle_sigwinch(int sig)
+{
+    recv_sig = SIGWINCH;
+}
+
+static void usage(char *pname)
+{
+    fprintf(stderr, "Usage: %s [-h|-F] [pipe_name|pipe_dir/]\n", pname);
+    fprintf(stderr, "\t-h\tThis help text.\n");
+    fprintf(stderr, "\t-F\tForce connection even though pipe is locked by other to_erl process.\n");
+}
+
+int main(int argc, char **argv)
+{
+    char  FIFO1[FILENAME_MAX], FIFO2[FILENAME_MAX];
+    int i, len, wfd, rfd;
+    fd_set readfds;
+    char buf[BUFSIZ];
+    char pipename[FILENAME_MAX];
+    int pipeIx = 1;
+    int force_lock = 0;
+    int got_some = 0;
+
+    if (argc >= 2 && argv[1][0]=='-') {
+	switch (argv[1][1]) {
+	case 'h':
+	    usage(argv[0]);
+	    exit(1);
+	case 'F':
+	    force_lock = 1;
+	    break;
+	default:
+	    fprintf(stderr,"Invalid option '%s'\n",argv[1]);
+	    exit(1);
+	}
+	pipeIx = 2;
+    }
+    
+#ifdef DEBUG
+    fprintf(stderr, "%s: pid is : %d\n", argv[0], (int)getpid());
+#endif
+    
+    strn_cpy(pipename, sizeof(pipename),
+	     (argv[pipeIx] ? argv[pipeIx] : PIPE_DIR));
+    
+    if(*pipename && pipename[strlen(pipename)-1] == '/') {
+	/* The user wishes us to find a pipe name in the specified */
+	/* directory */
+	int highest_pipe_num = 0;
+	DIR *dirp;
+	struct dirent *direntp;
+
+	dirp = opendir(pipename);
+	if(!dirp) {
+	    fprintf(stderr, "Can't access pipe directory %s: %s\n", pipename, strerror(errno));
+	    exit(1);
+	}
+
+	/* Check the directory for existing pipes */
+    
+	while((direntp=readdir(dirp)) != NULL) {
+	    if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) {
+		int num = atoi(direntp->d_name+PIPE_STUBLEN+1);
+		if(num > highest_pipe_num)
+		    highest_pipe_num = num;
+	    }
+	}	
+	closedir(dirp);
+	strn_catf(pipename, sizeof(pipename), (highest_pipe_num?"%s.%d":"%s"),
+		  PIPE_STUBNAME, highest_pipe_num);
+    } /* if */
+
+    /* read FIFO */
+    sn_printf(FIFO1,sizeof(FIFO1),"%s.r",pipename);
+    /* write FIFO */
+    sn_printf(FIFO2,sizeof(FIFO2),"%s.w",pipename);
+
+    /* Check that nobody is running to_erl on this pipe already */
+    if ((wfd = open (FIFO1, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) {
+	/* Open as server succeeded -- to_erl is already running! */
+	close(wfd);
+	fprintf(stderr, "Another to_erl process already attached to pipe "
+			"%s.\n", pipename);
+	if (force_lock) {
+	    fprintf(stderr, "But we proceed anyway by force (-F).\n");
+	} 
+	else {
+	    exit(1);
+	}
+    }
+
+    if ((rfd = open (FIFO1, O_RDONLY|DONT_BLOCK_PLEASE, 0)) < 0) {
+#ifdef DEBUG
+	fprintf(stderr, "Could not open FIFO %s for reading.\n", FIFO1);
+#endif
+	fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno));
+	exit(1);
+    }
+#ifdef DEBUG
+    fprintf(stderr, "to_erl: %s opened for reading\n", FIFO1);
+#endif
+    
+    if ((wfd = open (FIFO2, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) {
+#ifdef DEBUG
+	fprintf(stderr, "Could not open FIFO %s for writing.\n", FIFO2);
+#endif
+	fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno));
+	close(rfd);
+	exit(1);
+    }
+#ifdef DEBUG
+    fprintf(stderr, "to_erl: %s opened for writing\n", FIFO2);
+#endif
+    
+    fprintf(stderr, "Attaching to %s (^D to exit)\n\n", pipename);
+    
+    /* Set break handler to our handler */
+    signal(SIGINT,handle_ctrlc);
+
+    /* 
+     * Save the current state of the terminal, and set raw mode.
+     */
+    if (tcgetattr(0, &tty_rmode) , 0) {
+	fprintf(stderr, "Cannot get terminals current mode\n");
+	exit(-1);
+    }
+    tty_smode = tty_rmode;
+    tty_eof = '\004'; /* Ctrl+D to exit */
+#ifdef DEBUG
+    show_terminal_settings(&tty_rmode);
+#endif
+    tty_smode.c_iflag =
+	1*BRKINT |/*Signal interrupt on break.*/
+	    1*IGNPAR |/*Ignore characters with parity errors.*/
+		1*ISTRIP |/*Strip character.*/
+		    0;
+    
+#if 0
+0*IGNBRK |/*Ignore break condition.*/
+0*PARMRK |/*Mark parity errors.*/
+0*INPCK  |/*Enable input parity check.*/
+0*INLCR  |/*Map NL to CR on input.*/
+0*IGNCR  |/*Ignore CR.*/
+0*ICRNL  |/*Map CR to NL on input.*/
+0*IUCLC  |/*Map upper-case to lower-case on input.*/
+0*IXON   |/*Enable start/stop output control.*/
+0*IXANY  |/*Enable any character to restart output.*/
+0*IXOFF  |/*Enable start/stop input control.*/
+0*IMAXBEL|/*Echo BEL on input line too long.*/
+#endif
+						
+    tty_smode.c_oflag =
+	1*OPOST  |/*Post-process output.*/
+	    1*ONLCR  |/*Map NL to CR-NL on output.*/
+#ifdef XTABS
+		1*XTABS  |/*Expand tabs to spaces. (Linux)*/
+#endif
+#ifdef OXTABS
+		    1*OXTABS  |/*Expand tabs to spaces. (FreeBSD)*/
+#endif
+#ifdef NL0
+			1*NL0    |/*Select newline delays*/
+#endif
+#ifdef CR0
+			    1*CR0    |/*Select carriage-return delays*/
+#endif
+#ifdef TAB0
+				1*TAB0   |/*Select horizontal tab delays*/
+#endif
+#ifdef BS0
+				    1*BS0    |/*Select backspace delays*/
+#endif
+#ifdef VT0
+					1*VT0    |/*Select vertical tab delays*/
+#endif
+#ifdef FF0
+					    1*FF0    |/*Select form feed delays*/
+#endif
+											    0;
+    
+#if 0
+0*OLCUC  |/*Map lower case to upper on output.*/
+0*OCRNL  |/*Map CR to NL on output.*/
+0*ONOCR  |/*No CR output at column 0.*/
+0*ONLRET |/*NL performs CR function.*/
+0*OFILL  |/*Use fill characters for delay.*/
+0*OFDEL  |/*Fill is DEL, else NULL.*/
+0*NL1    |
+0*CR1    |
+0*CR2    |
+0*CR3    |
+0*TAB1   |
+0*TAB2   |
+0*TAB3   |/*Expand tabs to spaces.*/
+0*BS1    |
+0*VT1    |
+0*FF1    |
+#endif
+								    
+    /* JALI: removed setting the tty_smode.c_cflag flags, since this is not */
+    /* advisable if this is a *real* terminal, such as the console. In fact */
+    /* this may hang the entire machine, deep, deep down (signalling break */
+    /* or toggling the abort switch doesn't help) */
+    
+    tty_smode.c_lflag =
+									0;
+    
+#if 0
+0*ISIG   |/*Enable signals.*/
+0*ICANON |/*Canonical input (erase and kill processing).*/
+0*XCASE  |/*Canonical upper/lower presentation.*/
+0*ECHO   |/*Enable echo.*/
+0*ECHOE  |/*Echo erase character as BS-SP-BS.*/
+0*ECHOK  |/*Echo NL after kill character.*/
+0*ECHONL |/*Echo NL.*/
+0*NOFLSH |/*Disable flush after interrupt or quit.*/
+0*TOSTOP |/*Send SIGTTOU for background output.*/
+0*ECHOCTL|/*Echo control characters as ^char, delete as ^?.*/
+0*ECHOPRT|/*Echo erase character as character erased.*/
+0*ECHOKE |/*BS-SP-BS erase entire line on line kill.*/
+0*FLUSHO |/*Output is being flushed.*/
+0*PENDIN |/*Retype pending input at next read or input character.*/
+0*IEXTEN |/*Enable extended (implementation-defined) functions.*/
+#endif
+								
+    tty_smode.c_cc[VMIN]      =0;/* Note that VMIN is the same as VEOF! */
+    tty_smode.c_cc[VTIME]     =0;/* Note that VTIME is the same as VEOL! */
+    tty_smode.c_cc[VINTR]     =3;
+    
+    tcsetattr(0, TCSADRAIN, &tty_smode);
+    
+#ifdef DEBUG
+    show_terminal_settings(&tty_smode);
+#endif
+    /*
+     * 	 "Write a ^L to the FIFO which causes the other end to redisplay
+     *    the input line."
+     * This does not seem to work as was intended in old comment above.
+     * However, this control character is now (R12B-3) used by run_erl
+     * to trigger the version handshaking between to_erl and run_erl
+     * at the start of every new to_erl-session.
+     */
+
+    if (write(wfd, "\014", 1) < 0) {
+	fprintf(stderr, "Error in writing ^L to FIFO.\n");
+    }
+
+    /*
+     * read and write
+     */
+    while (1) {
+	FD_ZERO(&readfds);
+	FD_SET(0, &readfds);
+	FD_SET(rfd, &readfds);
+	if (select(rfd + 1, &readfds, NULL, NULL, NULL) < 0) {
+	    if (recv_sig) {
+		FD_ZERO(&readfds);
+	    }
+	    else {
+		fprintf(stderr, "Error in select.\n");
+		break;
+	    }
+	}
+	len = 0;
+
+	/*
+	 * Read from terminal and write to FIFO
+         */
+	if (recv_sig) {
+	    switch (recv_sig) {
+	    case SIGINT:
+		fprintf(stderr, "[Break]\n\r");
+		buf[0] = '\003';
+		len = 1;
+		break;
+	    case SIGWINCH:
+		len = window_size_seq(buf,sizeof(buf));
+		break;
+	    default:
+		fprintf(stderr,"Unexpected signal: %u\n",recv_sig);
+	    }
+	    recv_sig = 0;
+	}
+	else if (FD_ISSET(0, &readfds)) {
+	    len = read(0, buf, sizeof(buf));
+	    if (len <= 0) {
+		close(rfd);
+		close(wfd);
+		if (len < 0) {
+		    fprintf(stderr, "Error in reading from stdin.\n");
+		} else {
+		    fprintf(stderr, "[EOF]\n\r");
+		}
+		break;
+	    }
+	    /* check if there is an eof character in input */
+	    for (i = 0; i < len && buf[i] != tty_eof; i++);
+	    if (buf[i] == tty_eof) {
+		fprintf(stderr, "[Quit]\n\r");
+		break;
+	    }
+	}
+
+	if (len) {
+#ifdef DEBUG
+	    if(write(1, buf, len));
+#endif
+	    if (write_all(wfd, buf, len) != len) {
+		fprintf(stderr, "Error in writing to FIFO.\n");
+		close(rfd);
+		close(wfd);
+		break;
+	    }
+	    STATUS("\" OK\r\n");
+	}
+
+	/*
+	 * Read from FIFO, write to terminal.
+	 */
+	if (FD_ISSET(rfd, &readfds)) {
+	    STATUS("FIFO read: ");
+	    len = read(rfd, buf, BUFSIZ);
+	    if (len < 0 && errno == EAGAIN) {
+		/*
+		 * No data this time, but the writing end of the FIFO is still open.
+		 * Do nothing.
+		 */
+		;
+	    } else if (len <= 0) {
+		/*
+		 * Either an error or end of file. In either case, break out
+		 * of the loop.
+		 */
+		close(rfd);
+		close(wfd);
+		if (len < 0) {
+		    fprintf(stderr, "Error in reading from FIFO.\n");
+		} else
+		    fprintf(stderr, "[End]\n\r");
+		break;
+	    } else {
+		if (!got_some) {
+		    if ((len=version_handshake(buf,len,wfd)) < 0) {
+			close(rfd);
+			close(wfd);
+			break;
+		    }
+		    if (protocol_ver >= 1) {
+			/* Tell run_erl size of terminal window */
+			signal(SIGWINCH, handle_sigwinch);
+			raise(SIGWINCH);
+		    }
+		    got_some = 1;
+		}
+
+		/*
+		 * We successfully read at least one character. Write what we got.
+		 */
+		STATUS("Terminal write: \"");
+		if (write_all(1, buf, len) != len) {
+		    fprintf(stderr, "Error in writing to terminal.\n");
+		    close(rfd);
+		    close(wfd);
+		    break;
+		}
+		STATUS("\" OK\r\n");
+	    }
+	}
+    }
+
+    /* 
+     * Reset terminal characterstics 
+     * XXX
+     */
+    tcsetattr(0, TCSADRAIN, &tty_rmode);
+    return 0;
+}
+
+/* Call write() until entire buffer has been written or error.
+ * Return len or -1.
+ */
+static int write_all(int fd, const char* buf, int len)
+{
+    int left = len;
+    int written;
+    while (left) {
+	written = write(fd,buf,left);
+	if (written < 0) {
+	    return -1;
+	}
+	left -= written;
+	buf += written;
+    }
+    return len;
+}
+
+static int window_size_seq(char* buf, size_t bufsz)
+{
+#ifdef TIOCGWINSZ
+    struct winsize ws;
+    static const char prefix[] = "\033_";
+    static const char suffix[] = "\033\\";
+    /* This Esc sequence is called "Application Program Command"
+       and seems suitable to use for our own customized stuff. */
+
+    if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) == 0) {
+	int len = sn_printf(buf, bufsz, "%swinsize=%u,%u%s",
+			    prefix, ws.ws_col, ws.ws_row, suffix);
+	return len;
+    }
+#endif /* TIOCGWINSZ */
+    return 0;
+}
+
+/*   to_erl                     run_erl
+ *     |                           |
+ *     |---------- '\014' -------->| (session start)
+ *     |                           |
+ *     |<---- "[run_erl v1-0]" ----| (version interval)
+ *     |                           |
+ *     |--- Esc_"version=1"Esc\ -->| (common version)
+ *     |                           |
+ */
+static int version_handshake(char* buf, int len, int wfd)
+{
+    unsigned re_high=0, re_low;
+    char *end = find_str(buf,len,"]\n");
+    
+    if (end && sscanf(buf,"[run_erl v%u-%u",&re_high,&re_low)==2) {
+	char wbuf[30];
+	int wlen;
+
+	if (re_low > RUN_ERL_HI_VER || re_high < RUN_ERL_LO_VER) {
+	    fprintf(stderr,"Incompatible versions: to_erl=v%u-%u run_erl=v%u-%u\n",
+		    RUN_ERL_HI_VER, RUN_ERL_LO_VER, re_high, re_low);
+	    return -1;
+	}
+	/* Choose highest common version */
+	protocol_ver = re_high < RUN_ERL_HI_VER ? re_high : RUN_ERL_HI_VER;
+
+	wlen = sn_printf(wbuf, sizeof(wbuf), "\033_version=%u\033\\",
+			 protocol_ver);
+	if (write_all(wfd, wbuf, wlen) < 0) {
+	    fprintf(stderr,"Failed to send version handshake\n");
+	    return -1;
+	}
+	end += 2;
+	len -= (end-buf);
+	memmove(buf,end,len);
+
+    }
+    else {  /* we assume old run_erl without version handshake */
+	protocol_ver = 0;
+    }
+
+    if (re_high != RUN_ERL_HI_VER) {
+	fprintf(stderr,"run_erl has different version, "
+		"using common protocol level %u\n", protocol_ver);
+    }
+
+    return len;
+}
+
 
-#include "to_erl_common.h"
+#ifdef DEBUG
+#define S(x)  ((x) > 0 ? 1 : 0)
 
-int main(int argc,char **argv) {
-  return to_erl(argc,argv);
+static void show_terminal_settings(struct termios *t)
+{
+  fprintf(stderr,"c_iflag:\n");
+  fprintf(stderr,"Signal interrupt on break:   BRKINT  %d\n", S(t->c_iflag & BRKINT));
+  fprintf(stderr,"Map CR to NL on input:       ICRNL   %d\n", S(t->c_iflag & ICRNL));
+  fprintf(stderr,"Ignore break condition:      IGNBRK  %d\n", S(t->c_iflag & IGNBRK));
+  fprintf(stderr,"Ignore CR:                   IGNCR   %d\n", S(t->c_iflag & IGNCR));
+  fprintf(stderr,"Ignore char with par. err's: IGNPAR  %d\n", S(t->c_iflag & IGNPAR));
+  fprintf(stderr,"Map NL to CR on input:       INLCR   %d\n", S(t->c_iflag & INLCR));
+  fprintf(stderr,"Enable input parity check:   INPCK   %d\n", S(t->c_iflag & INPCK));
+  fprintf(stderr,"Strip character              ISTRIP  %d\n", S(t->c_iflag & ISTRIP));
+  fprintf(stderr,"Enable start/stop input ctrl IXOFF   %d\n", S(t->c_iflag & IXOFF));
+  fprintf(stderr,"ditto output ctrl            IXON    %d\n", S(t->c_iflag & IXON));
+  fprintf(stderr,"Mark parity errors           PARMRK  %d\n", S(t->c_iflag & PARMRK));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_oflag:\n");
+  fprintf(stderr,"Perform output processing    OPOST   %d\n", S(t->c_oflag & OPOST));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_cflag:\n");
+  fprintf(stderr,"Ignore modem status lines    CLOCAL  %d\n", S(t->c_cflag & CLOCAL));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_local:\n");
+  fprintf(stderr,"Enable echo                  ECHO    %d\n", S(t->c_lflag & ECHO));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_cc:\n");
+  fprintf(stderr,"c_cc[VEOF]                           %d\n", t->c_cc[VEOF]);
 }
+#endif