The R13B03 release.OTP_R13B03

14 files changed, 1893 insertions, 0 deletions

diff --git a/lib/crypto/doc/src/Makefile b/lib/crypto/doc/src/Makefile
new file mode 100644
index 0000000000..d2cec9b11b
--- /dev/null
+++ b/lib/crypto/doc/src/Makefile
@@ -0,0 +1,113 @@
+# ``The contents of this file are subject to the Erlang Public License,
+# Version 1.1, (the "License"); you may not use this file except in
+# compliance with the License. You should have received a copy of the
+# Erlang Public License along with this software. If not, it can be
+# retrieved via the world wide web at http://www.erlang.org/.
+# 
+# Software distributed under the License is distributed on an "AS IS"
+# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+# the License for the specific language governing rights and limitations
+# under the License.
+# 
+# The Initial Developer of the Original Code is Ericsson Utvecklings AB.
+# Portions created by Ericsson are Copyright 1999, Ericsson Utvecklings
+# AB. All Rights Reserved.''
+# 
+#     $Id$
+#
+include $(ERL_TOP)/make/target.mk
+include $(ERL_TOP)/make/$(TARGET)/otp.mk
+
+# ----------------------------------------------------
+# Application version
+# ----------------------------------------------------
+include ../../vsn.mk
+VSN=$(CRYPTO_VSN)
+APPLICATION=crypto
+
+# ----------------------------------------------------
+# Release directory specification
+# ----------------------------------------------------
+RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN)
+
+# ----------------------------------------------------
+# Target Specs
+# ----------------------------------------------------
+XML_APPLICATION_FILES = ref_man.xml
+XML_REF3_FILES = crypto.xml
+XML_REF6_FILES = crypto_app.xml
+
+XML_PART_FILES = release_notes.xml usersguide.xml
+XML_CHAPTER_FILES = notes.xml licenses.xml
+
+BOOK_FILES = book.xml
+
+GIF_FILES =
+
+# ----------------------------------------------------
+
+HTML_FILES = $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.html) \
+	$(XML_PART_FILES:%.xml=$(HTMLDIR)/%.html)
+
+INFO_FILE = ../../info
+
+MAN3_FILES = $(XML_REF3_FILES:%.xml=$(MAN3DIR)/%.3)
+MAN6_FILES = $(XML_REF6_FILES:%_app.xml=$(MAN6DIR)/%.6)
+
+HTML_REF_MAN_FILE = $(HTMLDIR)/index.html
+
+TOP_PDF_FILE = $(PDFDIR)/$(APPLICATION)-$(VSN).pdf
+
+# ----------------------------------------------------
+# FLAGS 
+# ----------------------------------------------------
+XML_FLAGS += 
+
+# ----------------------------------------------------
+# Targets
+# ----------------------------------------------------
+$(HTMLDIR)/%.gif: %.gif
+	$(INSTALL_DATA) $< $@
+
+
+docs: pdf html man
+
+$(TOP_PDF_FILE): $(XML_FILES)
+
+pdf: $(TOP_PDF_FILE)
+
+html: gifs $(HTML_REF_MAN_FILE)
+
+man: $(MAN3_FILES) $(MAN6_FILES)
+
+gifs: $(GIF_FILES:%=$(HTMLDIR)/%)
+
+debug opt valgrind: 
+
+clean clean_docs clean_tex:
+	rm -rf $(HTMLDIR)/*
+	rm -f $(MAN3DIR)/*
+	rm -f $(MAN6DIR)/*
+	rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo)
+	rm -f errs core *~
+
+# ----------------------------------------------------
+# Release Target
+# ---------------------------------------------------- 
+include $(ERL_TOP)/make/otp_release_targets.mk
+
+release_docs_spec: docs
+	$(INSTALL_DIR) $(RELSYSDIR)/doc/pdf
+	$(INSTALL_DATA) $(TOP_PDF_FILE) $(RELSYSDIR)/doc/pdf
+	$(INSTALL_DIR) $(RELSYSDIR)/doc/html
+	$(INSTALL_DATA) $(HTMLDIR)/* \
+		$(RELSYSDIR)/doc/html
+	$(INSTALL_DATA) $(INFO_FILE) $(RELSYSDIR)
+	$(INSTALL_DIR) $(RELEASE_PATH)/man/man3
+	$(INSTALL_DATA) $(MAN3DIR)/* $(RELEASE_PATH)/man/man3
+	$(INSTALL_DIR) $(RELEASE_PATH)/man/man6
+	$(INSTALL_DATA) $(MAN6DIR)/* $(RELEASE_PATH)/man/man6
+
+
+release_spec:
+
diff --git a/lib/crypto/doc/src/book.xml b/lib/crypto/doc/src/book.xml
new file mode 100644
index 0000000000..f07208482c
--- /dev/null
+++ b/lib/crypto/doc/src/book.xml
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE book SYSTEM "book.dtd">
+
+<book xmlns:xi="http://www.w3.org/2001/XInclude">
+  <header titlestyle="normal">
+    <copyright>
+      <year>1999</year><year>2009</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+    
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+    
+    </legalnotice>
+
+    <title>crypto</title>
+    <prepared>Peter H&ouml;gfeldt</prepared>
+    <docno></docno>
+    <date>1999-01-21</date>
+    <rev>A</rev>
+    <file>book.sgml</file>
+  </header>
+  <insidecover>
+    <include file="insidecover"></include>
+  </insidecover>
+  <pagetext>crypto</pagetext>
+  <preamble>
+    <contents level="2"></contents>
+  </preamble>
+  <parts lift="no">
+    <xi:include href="usersguide.xml"/>
+  </parts>
+  <applications>
+    <xi:include href="ref_man.xml"/>
+  </applications>
+  <releasenotes>
+    <xi:include href="notes.xml"/>
+  </releasenotes>
+  <listofterms></listofterms>
+  <index></index>
+</book>
+
diff --git a/lib/crypto/doc/src/crypto.xml b/lib/crypto/doc/src/crypto.xml
new file mode 100644
index 0000000000..42ba523c8c
--- /dev/null
+++ b/lib/crypto/doc/src/crypto.xml
@@ -0,0 +1,785 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE erlref SYSTEM "erlref.dtd">
+
+<erlref>
+  <header>
+    <copyright>
+      <year>1999</year><year>2009</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+    
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+    
+    </legalnotice>
+
+    <title>crypto</title>
+    <prepared>Peter H&ouml;gfeldt</prepared>
+    <docno></docno>
+    <date>2000-06-20</date>
+    <rev>B</rev>
+  </header>
+  <module>crypto</module>
+  <modulesummary>Crypto Functions</modulesummary>
+  <description>
+    <p>This module provides a set of cryptographic functions.
+      </p>
+    <p>References:</p>
+    <list type="bulleted">
+      <item>
+        <p>md5: The MD5 Message Digest Algorithm (RFC 1321)</p>
+      </item>
+      <item>
+        <p>sha: Secure Hash Standard (FIPS 180-2)</p>
+      </item>
+      <item>
+        <p>hmac: Keyed-Hashing for Message Authentication (RFC 2104)</p>
+      </item>
+      <item>
+        <p>des: Data Encryption Standard (FIPS 46-3)</p>
+      </item>
+      <item>
+        <p>aes: Advanced Encryption Standard (AES) (FIPS 197) </p>
+      </item>
+      <item>
+        <p>ecb, cbc, cfb, ofb: Recommendation for Block Cipher Modes
+          of Operation (NIST SP 800-38A).</p>
+      </item>
+      <item>
+        <p>rsa: Recommendation for Block Cipher Modes of Operation
+          (NIST 800-38A)</p>
+      </item>
+      <item>
+        <p>dss: Digital Signature Standard (FIPS 186-2)</p>
+      </item>
+    </list>
+    <p>The above publications can be found at <url href="http://csrc.nist.gov/publications">NIST publications</url>, at <url href="http://www.ietf.org">IETF</url>.
+      </p>
+    <p><em>Types</em></p>
+    <pre>
+byte() = 0 ... 255
+ioelem() = byte() | binary() | iolist()
+iolist() = [ioelem()]
+Mpint() = <![CDATA[<<ByteLen:32/integer-big, Bytes:ByteLen/binary>>]]>
+    </pre>
+    <p></p>
+  </description>
+  <funcs>
+    <func>
+      <name>start() -> ok</name>
+      <fsummary>Start the crypto server.</fsummary>
+      <desc>
+        <p>Starts the crypto server.</p>
+      </desc>
+    </func>
+    <func>
+      <name>stop() -> ok</name>
+      <fsummary>Stop the crypto server.</fsummary>
+      <desc>
+        <p>Stops the crypto server.</p>
+      </desc>
+    </func>
+    <func>
+      <name>info() -> [atom()]</name>
+      <fsummary>Provide a list of available crypto functions.</fsummary>
+      <desc>
+        <p>Provides the available crypto functions in terms of a list
+          of atoms.</p>
+      </desc>
+    </func>
+    <func>
+      <name>info_lib() -> [{Name,VerNum,VerStr}]</name>
+      <fsummary>Provides information about the libraries used by crypto.</fsummary>
+      <type>
+        <v>Name = binary()</v>
+        <v>VerNum = integer()</v>
+        <v>VerStr = binary()</v>
+      </type>
+      <desc>
+        <p>Provides the name and version of the libraries used by crypto.</p>
+        <p><c>Name</c> is the name of the library. <c>VerNum</c> is
+        the numeric version according to the library's own versioning
+        scheme. <c>VerStr</c> contains a text variant of the version.</p>
+        <pre>
+> <input>info_lib().</input>
+[{&lt;&lt;"OpenSSL"&gt;&gt;,9469983,&lt;&lt;"OpenSSL 0.9.8a 11 Oct 2005"&gt;&gt;}]
+        </pre>
+      </desc>
+    </func>
+    <func>
+      <name>md5(Data) -> Digest</name>
+      <fsummary>Compute an <c>MD5</c>message digest from <c>Data</c></fsummary>
+      <type>
+        <v>Data = iolist() | binary()</v>
+        <v>Digest = binary()</v>
+      </type>
+      <desc>
+        <p>Computes an <c>MD5</c> message digest from <c>Data</c>, where
+          the length of the digest is 128 bits (16 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>md5_init() -> Context</name>
+      <fsummary>Creates an MD5 context</fsummary>
+      <type>
+        <v>Context = binary()</v>
+      </type>
+      <desc>
+        <p>Creates an MD5 context, to be used in subsequent calls to 
+          <c>md5_update/2</c>.</p>
+      </desc>
+    </func>
+    <func>
+      <name>md5_update(Context, Data) -> NewContext</name>
+      <fsummary>Update an MD5 <c>Context</c>with <c>Data</c>, and return a <c>NewContext</c></fsummary>
+      <type>
+        <v>Data = iolist() | binary()</v>
+        <v>Context = NewContext = binary()</v>
+      </type>
+      <desc>
+        <p>Updates an MD5 <c>Context</c> with <c>Data</c>, and returns
+          a <c>NewContext</c>.</p>
+      </desc>
+    </func>
+    <func>
+      <name>md5_final(Context) -> Digest</name>
+      <fsummary>Finish the update of an MD5 <c>Context</c>and return the computed <c>MD5</c>message digest</fsummary>
+      <type>
+        <v>Context = Digest = binary()</v>
+      </type>
+      <desc>
+        <p>Finishes the update of an MD5 <c>Context</c> and returns
+          the computed <c>MD5</c> message digest.</p>
+      </desc>
+    </func>
+    <func>
+      <name>sha(Data) -> Digest</name>
+      <fsummary>Compute an <c>SHA</c>message digest from <c>Data</c></fsummary>
+      <type>
+        <v>Data = iolist() | binary()</v>
+        <v>Digest = binary()</v>
+      </type>
+      <desc>
+        <p>Computes an <c>SHA</c> message digest from <c>Data</c>, where
+          the length of the digest is 160 bits (20 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>sha_init() -> Context</name>
+      <fsummary>Create an SHA context</fsummary>
+      <type>
+        <v>Context = binary()</v>
+      </type>
+      <desc>
+        <p>Creates an SHA context, to be used in subsequent calls to 
+          <c>sha_update/2</c>.</p>
+      </desc>
+    </func>
+    <func>
+      <name>sha_update(Context, Data) -> NewContext</name>
+      <fsummary>Update an SHA context</fsummary>
+      <type>
+        <v>Data = iolist() | binary()</v>
+        <v>Context = NewContext = binary()</v>
+      </type>
+      <desc>
+        <p>Updates an SHA <c>Context</c> with <c>Data</c>, and returns
+          a <c>NewContext</c>.</p>
+      </desc>
+    </func>
+    <func>
+      <name>sha_final(Context) -> Digest</name>
+      <fsummary>Finish the update of an SHA context</fsummary>
+      <type>
+        <v>Context = Digest = binary()</v>
+      </type>
+      <desc>
+        <p>Finishes the update of an SHA <c>Context</c> and returns
+          the computed <c>SHA</c> message digest.</p>
+      </desc>
+    </func>
+    <func>
+      <name>md5_mac(Key, Data) -> Mac</name>
+      <fsummary>Compute an <c>MD5 MAC</c>message authentification code</fsummary>
+      <type>
+        <v>Key = Data = iolist() | binary()</v>
+        <v>Mac = binary()</v>
+      </type>
+      <desc>
+        <p>Computes an <c>MD5 MAC</c> message authentification code
+          from <c>Key</c> and <c>Data</c>, where the the length of the
+          Mac is 128 bits (16 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>md5_mac_96(Key, Data) -> Mac</name>
+      <fsummary>Compute an <c>MD5 MAC</c>message authentification code</fsummary>
+      <type>
+        <v>Key = Data = iolist() | binary()</v>
+        <v>Mac = binary()</v>
+      </type>
+      <desc>
+        <p>Computes an <c>MD5 MAC</c> message authentification code
+          from <c>Key</c> and <c>Data</c>, where the length of the Mac
+          is 96 bits (12 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>sha_mac(Key, Data) -> Mac</name>
+      <fsummary>Compute an <c>MD5 MAC</c>message authentification code</fsummary>
+      <type>
+        <v>Key = Data = iolist() | binary()</v>
+        <v>Mac = binary()</v>
+      </type>
+      <desc>
+        <p>Computes an <c>SHA MAC</c> message authentification code
+          from <c>Key</c> and <c>Data</c>, where the length of the Mac
+          is 160 bits (20 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>sha_mac_96(Key, Data) -> Mac</name>
+      <fsummary>Compute an <c>MD5 MAC</c>message authentification code</fsummary>
+      <type>
+        <v>Key = Data = iolist() | binary()</v>
+        <v>Mac = binary()</v>
+      </type>
+      <desc>
+        <p>Computes an <c>SHA MAC</c> message authentification code
+          from <c>Key</c> and <c>Data</c>, where the length of the Mac
+          is 96 bits (12 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>des_cbc_encrypt(Key, IVec, Text) -> Cipher</name>
+      <fsummary>Encrypt <c>Text</c>according to DES in CBC mode</fsummary>
+      <type>
+        <v>Key = Text = iolist() | binary()</v>
+        <v>IVec = Cipher = binary()</v>
+      </type>
+      <desc>
+        <p>Encrypts <c>Text</c> according to DES in CBC
+          mode. <c>Text</c> must be a multiple of 64 bits (8
+          bytes). <c>Key</c> is the DES key, and <c>IVec</c> is an
+          arbitrary initializing vector. The lengths of <c>Key</c> and
+          <c>IVec</c> must be 64 bits (8 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>des_cbc_decrypt(Key, IVec, Cipher) -> Text</name>
+      <fsummary>Decrypt <c>Cipher</c>according to DES in CBC mode</fsummary>
+      <type>
+        <v>Key = Cipher = iolist() | binary()</v>
+        <v>IVec = Text = binary()</v>
+      </type>
+      <desc>
+        <p>Decrypts <c>Cipher</c> according to DES in CBC mode.
+          <c>Key</c> is the DES key, and <c>IVec</c> is an arbitrary
+          initializing vector.  <c>Key</c> and <c>IVec</c> must have
+          the same values as those used when encrypting. <c>Cipher</c>
+          must be a multiple of 64 bits (8 bytes).  The lengths of
+          <c>Key</c> and <c>IVec</c> must be 64 bits (8 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>des_cbc_ivec(Data) -> IVec</name>
+      <fsummary>Get <c>IVec</c> to be used in next iteration of
+                <c>des_cbc_[ecrypt|decrypt]</c></fsummary>
+      <type>
+        <v>Data = iolist() | binary()</v>
+        <v>IVec = binary()</v>
+      </type>
+      <desc>
+        <p>Returns the <c>IVec</c> to be used in a next iteration of 
+          <c>des_cbc_[encrypt|decrypt]</c>. <c>Data</c> is the encrypted
+          data from the previous iteration step.</p>
+      </desc>
+    </func>
+    <func>
+      <name>des3_cbc_encrypt(Key1, Key2, Key3, IVec, Text) -> Cipher</name>
+      <fsummary>Encrypt <c>Text</c>according to DES3 in CBC mode</fsummary>
+      <type>
+        <v>Key1 =Key2 = Key3 Text = iolist() | binary()</v>
+        <v>IVec = Cipher = binary()</v>
+      </type>
+      <desc>
+        <p>Encrypts <c>Text</c> according to DES3 in CBC
+          mode. <c>Text</c> must be a multiple of 64 bits (8
+          bytes). <c>Key1</c>, <c>Key2</c>, <c>Key3</c>, are the DES
+          keys, and <c>IVec</c> is an arbitrary initializing
+          vector. The lengths of each of <c>Key1</c>, <c>Key2</c>,
+          <c>Key3</c> and <c>IVec</c> must be 64 bits (8 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>des3_cbc_decrypt(Key1, Key2, Key3, IVec, Cipher) -> Text</name>
+      <fsummary>Decrypt <c>Cipher</c>according to DES in CBC mode</fsummary>
+      <type>
+        <v>Key1 = Key2 = Key3 = Cipher = iolist() | binary()</v>
+        <v>IVec = Text = binary()</v>
+      </type>
+      <desc>
+        <p>Decrypts <c>Cipher</c> according to DES3 in CBC mode.
+          <c>Key1</c>, <c>Key2</c>, <c>Key3</c> are the DES key, and
+          <c>IVec</c> is an arbitrary initializing vector.
+          <c>Key1</c>, <c>Key2</c>, <c>Key3</c> and <c>IVec</c> must
+          and <c>IVec</c> must have the same values as those used when
+          encrypting. <c>Cipher</c> must be a multiple of 64 bits (8
+          bytes).  The lengths of <c>Key1</c>, <c>Key2</c>,
+          <c>Key3</c>, and <c>IVec</c> must be 64 bits (8 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>blowfish_cfb64_encrypt(Key, IVec, Text) -> Cipher</name>
+      <fsummary>Encrypt <c>Text</c>using Blowfish in CFB mode with 64
+        bit feedback</fsummary>
+      <type>
+        <v>Key = Text = iolist() | binary()</v>
+        <v>IVec = Cipher = binary()</v>
+      </type>
+      <desc>
+        <p>Encrypts <c>Text</c> using Blowfish in CFB mode with 64 bit
+          feedback. <c>Key</c> is the Blowfish key, and <c>IVec</c> is an
+          arbitrary initializing vector. The length of <c>IVec</c>
+          must be 64 bits (8 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>blowfish_cfb64_decrypt(Key, IVec, Text) -> Cipher</name>
+      <fsummary>Decrypt <c>Text</c>using Blowfish in CFB mode with 64
+        bit feedback</fsummary>
+      <type>
+        <v>Key = Text = iolist() | binary()</v>
+        <v>IVec = Cipher = binary()</v>
+      </type>
+      <desc>
+        <p>Decrypts <c>Text</c> using Blowfish in CFB mode with 64 bit
+          feedback. <c>Key</c> is the Blowfish key, and <c>IVec</c> is an
+          arbitrary initializing vector. The length of <c>IVec</c>
+          must be 64 bits (8 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>aes_cfb_128_encrypt(Key, IVec, Text) -> Cipher</name>
+      <name>aes_cbc_128_encrypt(Key, IVec, Text) -> Cipher</name>
+      <fsummary>Encrypt <c>Text</c>according to AES in Cipher Feedback  mode or Cipher Block Chaining mode</fsummary>
+      <type>
+        <v>Key = Text = iolist() | binary()</v>
+        <v>IVec = Cipher = binary()</v>
+      </type>
+      <desc>
+        <p>Encrypts <c>Text</c> according to AES in Cipher Feedback 
+          mode (CFB) or Cipher Block Chaining mode (CBC). <c>Text</c>
+          must be a multiple of 128 bits (16 bytes). <c>Key</c> is the
+          AES key, and <c>IVec</c> is an arbitrary initializing vector.
+          The lengths of <c>Key</c> and <c>IVec</c> must be 128 bits
+          (16 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>aes_cfb_128_decrypt(Key, IVec, Cipher) -> Text</name>
+      <name>aes_cbc_128_decrypt(Key, IVec, Cipher) -> Text</name>
+      <fsummary>Decrypt <c>Cipher</c>according to AES in Cipher Feedback  mode or Cipher Block Chaining mode</fsummary>
+      <type>
+        <v>Key = Cipher = iolist() | binary()</v>
+        <v>IVec = Text = binary()</v>
+      </type>
+      <desc>
+        <p>Decrypts <c>Cipher</c> according to Cipher Feedback Mode (CFB)
+          or Cipher Block Chaining mode (CBC).
+          <c>Key</c> is the AES key, and <c>IVec</c> is an arbitrary
+          initializing vector. <c>Key</c> and <c>IVec</c> must have
+          the same values as those used when encrypting. <c>Cipher</c>
+          must be a multiple of 128 bits (16 bytes).  The lengths of
+          <c>Key</c> and <c>IVec</c> must be 128 bits (16 bytes).</p>
+      </desc>
+    </func>
+    <func>
+      <name>aes_cbc_ivec(Data) -> IVec</name>
+      <fsummary>Get <c>IVec</c> to be used in next iteration of
+                <c>aes_cbc_*_[ecrypt|decrypt]</c></fsummary>
+      <type>
+        <v>Data = iolist() | binary()</v>
+        <v>IVec = binary()</v>
+      </type>
+      <desc>
+        <p>Returns the <c>IVec</c> to be used in a next iteration of 
+          <c>aes_cbc_*_[encrypt|decrypt]</c>. <c>Data</c> is the encrypted
+          data from the previous iteration step.</p>
+      </desc>
+    </func>
+    <func>
+      <name>erlint(Mpint) -> N</name>
+      <name>mpint(N) -> Mpint</name>
+      <fsummary>Convert between binary multi-precision integer and erlang big integer</fsummary>
+      <type>
+        <v>Mpint = binary()</v>
+        <v>N = integer()</v>
+      </type>
+      <desc>
+        <p>Convert a binary multi-precision integer <c>Mpint</c> to and from
+          an erlang big integer. A multi-precision integer is a binary
+          with the following form:
+          <c><![CDATA[<<ByteLen:32/integer, Bytes:ByteLen/binary>>]]></c> where both
+          <c>ByteLen</c> and <c>Bytes</c> are big-endian. Mpints are used in
+          some of the functions in <c>crypto</c> and are not translated
+          in the API for performance reasons.</p>
+      </desc>
+    </func>
+    <func>
+      <name>rand_bytes(N) -> binary()</name>
+      <fsummary>Generate a binary of random bytes</fsummary>
+      <type>
+        <v>N = integer()</v>
+      </type>
+      <desc>
+        <p>Generates N bytes randomly uniform 0..255, and returns the
+          result in a binary. Uses the <c>crypto</c> library pseudo-random
+          number generator.</p>
+      </desc>
+    </func>
+    <func>
+      <name>rand_uniform(Lo, Hi) -> N</name>
+      <fsummary>Generate a random number</fsummary>
+      <type>
+        <v>Lo, Hi, N = Mpint | integer()</v>
+        <v>Mpint = binary()</v>
+      </type>
+      <desc>
+        <p>Generate a random number <c><![CDATA[N, Lo =< N < Hi.]]></c> Uses the
+          <c>crypto</c> library pseudo-random number generator. The
+          arguments (and result) can be either erlang integers or binary
+          multi-precision integers.</p>
+      </desc>
+    </func>
+    <func>
+      <name>mod_exp(N, P, M) -> Result</name>
+      <fsummary>Perform N ^ P mod M</fsummary>
+      <type>
+        <v>N, P, M, Result = Mpint</v>
+        <v>Mpint = binary()</v>
+      </type>
+      <desc>
+        <p>This function performs the exponentiation <c>N ^ P mod M</c>,
+          using the <c>crypto</c> library.</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>rsa_sign(Data, Key) -> Signature</name>
+      <name>rsa_sign(DigestType, Data, Key) -> Signature</name> 
+      <fsummary>Sign the data using rsa with the given key.</fsummary>
+      <type>
+        <v>Data = Mpint</v>
+        <v>Key = [E, N, D]</v>
+        <v>E, N, D = Mpint</v>
+        <d>Where <c>E</c> is the public exponent, <c>N</c> is public modulus and 
+	  <c>D</c> is the private exponent.</d>
+	<v>DigestType = md5 | sha</v>
+	<d>The default <c>DigestType</c> is sha.</d>
+        <v>Mpint = binary()</v>
+        <v>Signature = binary()</v>
+      </type>
+      <desc>
+        <p>Calculates a <c>DigestType</c> digest of the <c>Data</c>
+	  and creates a RSA signature with the private key <c>Key</c>
+	  of the digest.</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>rsa_verify(Data, Signature, Key) -> Verified</name>
+      <name>rsa_verify(DigestType, Data, Signature, Key) -> Verified </name> 
+      <fsummary>Verify the digest and signature using rsa with given public key.</fsummary>
+      <type>
+        <v>Verified = boolean()</v>
+        <v>Data, Signature = Mpint</v>
+        <v>Key = [E, N]</v>
+        <v>E, N = Mpint</v>
+        <d>Where <c>E</c> is the public exponent and <c>N</c> is public modulus.</d>
+	<v>DigestType = md5 | sha</v>
+	<d> The default <c>DigestType</c> is sha.</d>
+        <v>Mpint = binary()</v>
+      </type>
+      <desc>
+        <p>Calculates a <c>DigestType</c> digest of the <c>Data</c>
+          and verifies that the digest matches the RSA signature using the
+          signer's public key <c>Key</c>.
+	</p>
+      </desc>
+    </func>
+    
+    <func>
+      <name>rsa_public_encrypt(PlainText, PublicKey, Padding) -> ChipherText</name> 
+      <fsummary>Encrypts Msg using the public Key.</fsummary>
+      <type>
+	<v>PlainText = binary()</v>
+	<v>PublicKey = [E, N]</v>
+	<v>E, N = Mpint</v>	
+	<d>Where <c>E</c> is the public exponent and <c>N</c> is public modulus.</d>
+	<v>Padding = rsa_pkcs1_padding | rsa_pkcs1_oaep_padding | rsa_no_padding</v>
+        <v>ChipherText = binary()</v>
+      </type>
+      <desc>
+	<p>Encrypts the <c>PlainText</c> (usually a session key) using the <c>PublicKey</c>
+	  and returns the cipher. The <c>Padding</c> decides what padding mode is used,
+	  <c>rsa_pkcs1_padding</c> is PKCS #1 v1.5 currently the most
+	  used mode and <c>rsa_pkcs1_oaep_padding</c> is EME-OAEP as
+	  defined in PKCS #1 v2.0 with SHA-1, MGF1 and an empty encoding
+	  parameter. This mode is recommended for all new applications.
+	  The size of the <c>Msg</c> must be less
+	  than <c>byte_size(N)-11</c> if
+	  <c>rsa_pkcs1_padding</c> is used, <c>byte_size(N)-41</c> if 
+	  <c>rsa_pkcs1_oaep_padding</c> is used and <c>byte_size(N)</c> if <c>rsa_no_padding</c> 
+	  is used.
+	  Where byte_size(N) is the size part of an <c>Mpint-1</c>.
+	</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>rsa_private_decrypt(ChipherText, PrivateKey, Padding) -> PlainText</name> 
+      <fsummary>Decrypts ChipherText using the private Key.</fsummary>
+      <type>
+	<v>ChipherText = binary()</v>
+	<v>PrivateKey = [E, N, D]</v>
+	<v>E, N, D = Mpint</v>
+	<d>Where <c>E</c> is the public exponent, <c>N</c> is public modulus  and 
+	  <c>D</c> is the private exponent.</d>
+	<v>Padding = rsa_pkcs1_padding | rsa_pkcs1_oaep_padding | rsa_no_padding</v>
+        <v>PlainText = binary()</v>
+      </type>
+      <desc>
+	<p>Decrypts the <c>ChipherText</c> (usually a session key encrypted with 
+	  <seealso marker="#rsa_public_encrypt/3">rsa_public_encrypt/3</seealso>) 
+	  using the <c>PrivateKey</c> and returns the
+	  message. The <c>Padding</c> is the padding mode that was
+	  used to encrypt the data, 
+	  see <seealso marker="#rsa_public_encrypt/3">rsa_public_encrypt/3</seealso>.
+	</p>
+      </desc>
+    </func>
+    <func>
+      <name>rsa_private_encrypt(PlainText, PrivateKey, Padding) -> ChipherText</name> 
+      <fsummary>Encrypts Msg using the private Key.</fsummary>
+      <type>
+	<v>PlainText = binary()</v>
+	<v>PrivateKey = [E, N, D]</v>
+	<v>E, N, D = Mpint</v>	
+	<d>Where <c>E</c> is the public exponent, <c>N</c> is public modulus and 
+	  <c>D</c> is the private exponent.</d>
+	<v>Padding = rsa_pkcs1_padding | rsa_no_padding</v>
+        <v>ChipherText = binary()</v>
+      </type>
+      <desc>
+	<p>Encrypts the <c>PlainText</c> using the <c>PrivateKey</c>
+	  and returns the cipher. The <c>Padding</c> decides what padding mode is used,
+	  <c>rsa_pkcs1_padding</c> is PKCS #1 v1.5 currently the most
+	  used mode.
+	  The size of the <c>Msg</c> must be less than <c>byte_size(N)-11</c> if
+	  <c>rsa_pkcs1_padding</c> is used, and <c>byte_size(N)</c> if <c>rsa_no_padding</c> 
+	  is used.  Where byte_size(N) is the size part of an <c>Mpint-1</c>.
+	</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>rsa_public_decrypt(ChipherText, PublicKey, Padding) -> PlainText</name> 
+      <fsummary>Decrypts ChipherText using the public Key.</fsummary>
+      <type>
+	<v>ChipherText = binary()</v>
+	<v>PublicKey = [E, N]</v>
+	<v>E, N = Mpint</v>
+	<d>Where <c>E</c> is the public exponent and <c>N</c> is public modulus</d>
+	<v>Padding = rsa_pkcs1_padding | rsa_no_padding</v>
+        <v>PlainText = binary()</v>
+      </type>
+      <desc>
+	<p>Decrypts the <c>ChipherText</c> (encrypted with 
+	  <seealso marker="#rsa_private_encrypt/3">rsa_private_encrypt/3</seealso>) 
+	  using the <c>PrivateKey</c> and returns the
+	  message. The <c>Padding</c> is the padding mode that was
+	  used to encrypt the data, 
+	  see <seealso marker="#rsa_private_encrypt/3">rsa_private_encrypt/3</seealso>.
+	</p>
+      </desc>
+    </func>
+      
+    <func>
+      <name>dss_sign(Data, Key) -> Signature</name>
+      <fsummary>Sign the data using dsa with given private key.</fsummary>
+      <type>
+        <v>Digest = Mpint</v>
+        <v>Key = [P, Q, G, X]</v>
+        <v>P, Q, G, X = Mpint</v>
+	<d> Where <c>P</c>, <c>Q</c> and <c>G</c> are the dss
+	  parameters and <c>X</c> is the private key.</d>
+        <v>Mpint = binary()</v>
+        <v>Signature = binary()</v>
+      </type>
+      <desc>
+        <p>Calculates the sha digest of the <c>Data</c>
+	  and creates a DSS signature with the private key <c>Key</c>
+	  of the digest.</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>dss_verify(Data, Signature, Key) -> Verified</name>
+      <fsummary>Verify the data and signature using dsa with given public key.</fsummary>
+      <type>
+        <v>Verified = boolean()</v>
+        <v>Digest, Signature = Mpint</v>
+        <v>Key = [P, Q, G, Y]</v>
+        <v>P, Q, G, Y = Mpint</v>
+	<d> Where <c>P</c>, <c>Q</c> and <c>G</c> are the dss
+	  parameters and <c>Y</c> is the public key.</d>
+        <v>Mpint = binary()</v>
+      </type>
+      <desc>
+        <p>Calculates the sha digest of the <c>Data</c> and verifies that the
+          digest matches the DSS signature using the public key <c>Key</c>.
+	</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>rc4_encrypt(Key, Data) -> Result</name>
+      <fsummary>Encrypt data using RC4</fsummary>
+      <type>
+	<v>Key, Data = iolist() | binary()</v>
+	<v>Result = binary()</v>
+      </type>
+      <desc>
+	<p>Encrypts the data with RC4 symmetric stream encryption.
+	  Since it is symmetric, the same function is used for
+	  decryption.</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>dh_generate_key(DHParams) -> {PublicKey,PrivateKey} </name>
+      <name>dh_generate_key(PrivateKey, DHParams) -> {PublicKey,PrivateKey} </name>
+      <fsummary>Generates a Diffie-Hellman public key</fsummary>
+      <type>
+	<v>DHParameters = [P, G]</v>
+	<v>P, G = Mpint</v>
+	<d> Where <c>P</c> is the shared prime number and <c>G</c> is the shared generator.</d>
+	<v>PublicKey, PrivateKey = Mpint()</v>
+      </type>
+      <desc>
+	<p>Generates a Diffie-Hellman <c>PublicKey</c> and <c>PrivateKey</c> (if not given).
+	</p>
+      </desc>
+    </func>
+
+    <func>
+      <name>dh_compute_key(OthersPublicKey, MyPrivateKey, DHParams) -> SharedSecret</name>
+      <fsummary>Computes the shared secret</fsummary>
+      <type>
+	<v>DHParameters = [P, G]</v>
+	<v>P, G = Mpint</v>
+	<d> Where <c>P</c> is the shared prime number and <c>G</c> is the shared generator.</d>
+	<v>OthersPublicKey, MyPrivateKey = Mpint()</v>
+	<v>SharedSecret = binary()</v>
+      </type>
+      <desc>
+	<p>Computes the shared secret from the private key and the other party's public key.
+	</p>
+      </desc>
+    </func>
+   
+
+    <func>
+      <name>exor(Data1, Data2) -> Result</name>
+      <fsummary>XOR data</fsummary>
+      <type>
+	<v>Data1, Data2 = iolist() | binary()</v>
+	<v>Result = binary()</v>
+      </type>
+      <desc>
+	<p>Performs bit-wise XOR (exclusive or) on the data supplied.</p>
+      </desc>
+    </func>
+  </funcs>
+
+  <section>
+    <title>DES in CBC mode</title>
+    <p>The Data Encryption Standard (DES) defines an algorithm for
+      encrypting and decrypting an 8 byte quantity using an 8 byte key
+      (actually only 56 bits of the key is used).
+      </p>
+    <p>When it comes to encrypting and decrypting blocks that are
+      multiples of 8 bytes various modes are defined (NIST SP
+      800-38A). One of those modes is the Cipher Block Chaining (CBC)
+      mode, where the encryption of an 8 byte segment depend not only
+      of the contents of the segment itself, but also on the result of
+      encrypting the previous segment: the encryption of the previous
+      segment becomes the initializing vector of the encryption of the
+      current segment.
+      </p>
+    <p>Thus the encryption of every segment depends on the encryption
+      key (which is secret) and the encryption of the previous
+      segment, except the first segment which has to be provided with
+      an initial initializing vector. That vector could be chosen at
+      random, or be a counter of some kind. It does not have to be
+      secret.
+      </p>
+    <p>The following example is drawn from the old FIPS 81 standard
+      (replaced by NIST SP 800-38A), where both the plain text and the
+      resulting cipher text is settled. The following code fragment
+      returns `true'.
+      </p>
+    <pre><![CDATA[
+
+      Key = <<16#01,16#23,16#45,16#67,16#89,16#ab,16#cd,16#ef>>,
+      IVec = <<16#12,16#34,16#56,16#78,16#90,16#ab,16#cd,16#ef>>,
+      P = "Now is the time for all ",
+      C = crypto:des_cbc_encrypt(Key, IVec, P),
+         % Which is the same as 
+      P1 = "Now is t", P2 = "he time ", P3 = "for all ",
+      C1 = crypto:des_cbc_encrypt(Key, IVec, P1),
+      C2 = crypto:des_cbc_encrypt(Key, C1, P2),
+      C3 = crypto:des_cbc_encrypt(Key, C2, P3),
+
+      C = <<C1/binary, C2/binary, C3/binary>>,
+      C = <<16#e5,16#c7,16#cd,16#de,16#87,16#2b,16#f2,16#7c,
+             16#43,16#e9,16#34,16#00,16#8c,16#38,16#9c,16#0f,
+             16#68,16#37,16#88,16#49,16#9a,16#7c,16#05,16#f6>>,
+      <<"Now is the time for all ">> == 
+                        crypto:des_cbc_decrypt(Key, IVec, C).
+    ]]></pre>
+    <p>The following is true for the DES CBC mode. For all
+      decompositions <c>P1 ++ P2 = P</c> of a plain text message
+      <c>P</c> (where the length of all quantities are multiples of 8
+      bytes), the encryption <c>C</c> of <c>P</c> is equal to <c>C1 ++
+      C2</c>, where <c>C1</c> is obtained by encrypting <c>P1</c> with
+      <c>Key</c> and the initializing vector <c>IVec</c>, and where
+      <c>C2</c> is obtained by encrypting <c>P2</c> with <c>Key</c>
+      and the initializing vector <c>last8(C1)</c>,
+      where <c>last(Binary)</c> denotes the last 8 bytes of the
+      binary <c>Binary</c>.
+      </p>
+    <p>Similarly, for all decompositions <c>C1 ++ C2 = C</c> of a
+      cipher text message <c>C</c> (where the length of all quantities
+      are multiples of 8 bytes), the decryption <c>P</c> of <c>C</c>
+      is equal to <c>P1 ++ P2</c>, where <c>P1</c> is obtained by
+      decrypting <c>C1</c> with <c>Key</c> and the initializing vector
+      <c>IVec</c>, and where <c>P2</c> is obtained by decrypting
+      <c>C2</c> with <c>Key</c> and the initializing vector
+      <c>last8(C1)</c>, where <c>last8(Binary)</c> is as above.
+      </p>
+    <p>For DES3 (which uses three 64 bit keys) the situation is the
+      same.
+    </p>
+  </section>
+</erlref>
+
diff --git a/lib/crypto/doc/src/crypto_app.xml b/lib/crypto/doc/src/crypto_app.xml
new file mode 100644
index 0000000000..bf1d1ae1f7
--- /dev/null
+++ b/lib/crypto/doc/src/crypto_app.xml
@@ -0,0 +1,108 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE appref SYSTEM "appref.dtd">
+
+<appref>
+  <header>
+    <copyright>
+      <year>1999</year>
+      <year>2007</year>
+      <holder>Ericsson AB, All Rights Reserved</holder>
+    </copyright>
+    <legalnotice>
+  The contents of this file are subject to the Erlang Public License,
+  Version 1.1, (the "License"); you may not use this file except in
+  compliance with the License. You should have received a copy of the
+  Erlang Public License along with this software. If not, it can be
+  retrieved online at http://www.erlang.org/.
+
+  Software distributed under the License is distributed on an "AS IS"
+  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+  the License for the specific language governing rights and limitations
+  under the License.
+
+  The Initial Developer of the Original Code is Ericsson AB.
+    </legalnotice>
+
+    <title>crypto</title>
+    <prepared>Peter H&ouml;gfeldt</prepared>
+    <responsible>Peter H&ouml;gfeldt</responsible>
+    <docno></docno>
+    <approved>Peter H&ouml;gfeldt</approved>
+    <checked>Peter H&ouml;gfeldt</checked>
+    <date>2003-06-01</date>
+    <rev>B</rev>
+    <file>crypto_app.sgml</file>
+  </header>
+  <app>crypto</app>
+  <appsummary>The Crypto Application</appsummary>
+  <description>
+    <p>The purpose of the Crypto application is to provide message
+      digest and DES encryption for SMNPv3. It provides computation of
+      message digests MD5 and SHA, and CBC-DES encryption and
+      decryption.</p>
+    <p></p>
+  </description>
+
+  <section>
+    <title>Configuration</title>
+    <p>The following environment configuration parameters are defined
+      for the Crypto application. Refer to application(3) for more
+      information about configuration parameters.
+      </p>
+    <taglist>
+      <tag><c><![CDATA[debug = true | false <optional>]]></c></tag>
+      <item>
+        <p>Causes debug information to be written to standard
+          error or standard output. Default is <c>false</c>.
+          </p>
+      </item>
+    </taglist>
+  </section>
+
+  <section>
+    <title>OpenSSL libraries</title>
+    <p>The current implementation of the Erlang Crypto application is
+      based on the <em>OpenSSL</em> package version 0.9.7 or higher.
+      There are source and binary releases on the web.
+      </p>
+    <p>Source releases of OpenSSL can be downloaded from the <url href="http://www.openssl.org">OpenSSL</url> project home page,
+      or mirror sites listed there.
+      </p>
+    <p>The same URL also contains links to some compiled binaries and
+      libraries of OpenSSL (see the <c>Related/Binaries</c> menu) of
+      which the <url href="http://www.shininglightpro.com/search.php?searchname=Win32+OpenSSL">Shining Light Productions Win32 and OpenSSL</url> pages are of
+      interest for the Win32 user.
+      </p>
+    <p>For some Unix flavours there are binary packages available
+      on the net.
+      </p>
+    <p>If you cannot find a suitable binary OpenSSL package, you
+      have to fetch an OpenSSL source release and compile it.
+      </p>
+    <p>You then have to compile and install the library
+      <c>libcrypto.so</c> (Unix), or the library <c>libeay32.dll</c>
+      (Win32).
+      </p>
+    <p>For Unix The <c>crypto_drv</c> dynamic driver is delivered linked
+      to OpenSSL libraries in <c>/usr/local/lib</c>, but the default
+      dynamic linking will also accept libraries in <c>/lib</c> and
+      <c>/usr/lib</c>.
+      </p>
+    <p>If that is not applicable to the particular Unix operating
+      system used, the example <c>Makefile</c> in the Crypto
+      <c>priv/obj</c> directory, should be used as a basis for 
+      relinking the final version of the port program.
+      </p>
+    <p>For <c>Win32</c> it is only required that the library can be
+      found from the <c>PATH</c> environment variable, or that they
+      reside in the appropriate <c>SYSTEM32</c> directory; hence no
+      particular relinking is need. Hence no example <c>Makefile</c>
+      for Win32 is provided.</p>
+  </section>
+
+  <section>
+    <title>SEE ALSO</title>
+    <p>application(3)</p>
+  </section>
+</appref>
+
diff --git a/lib/crypto/doc/src/fascicules.xml b/lib/crypto/doc/src/fascicules.xml
new file mode 100644
index 0000000000..8fc250bc75
--- /dev/null
+++ b/lib/crypto/doc/src/fascicules.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE fascicules SYSTEM "fascicules.dtd">
+
+<fascicules>
+  <fascicule file="usersguide" href="usersguide_frame.html" entry="no">
+    User's Guide
+  </fascicule>
+  <fascicule file="ref_man" href="ref_man_frame.html" entry="yes">
+    Reference Manual
+  </fascicule>
+  <fascicule file="release_notes" href="release_notes_frame.html" entry="no">
+    Release Notes
+  </fascicule>
+  <fascicule file="" href="../../../../doc/print.html" entry="no">
+    Off-Print
+  </fascicule>
+</fascicules>
+
diff --git a/lib/crypto/doc/src/insidecover.xml b/lib/crypto/doc/src/insidecover.xml
new file mode 100644
index 0000000000..e7407b8052
--- /dev/null
+++ b/lib/crypto/doc/src/insidecover.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE bookinsidecover SYSTEM "bookinsidecover.dtd">
+
+<bookinsidecover>
+
+  The Erlang/OTP SSL application includes software developed by the
+  OpenSSL Project for use in the OpenSSL Toolkit
+  (http://www.openssl.org/). Copyright (c) 1998-2002 The OpenSSL
+  Project.  All rights reserved.
+
+  <br/>
+  This product includes cryptographic software written by Eric Young
+  ([email protected]).  This product includes software written by Tim
+  Hudson ([email protected]). Copyright (C) 1995-1998 Eric Young
+  ([email protected]). All rights reserved.
+
+  <br/>
+  For further OpenSSL and SSLeay license information se the chapter
+  <bold>Licenses</bold>.
+
+  <vfill/>
+  <br/>
+  <tt>http://www.erlang.org</tt>
+  <br/>
+</bookinsidecover>
+
diff --git a/lib/crypto/doc/src/licenses.xml b/lib/crypto/doc/src/licenses.xml
new file mode 100644
index 0000000000..bae87a373e
--- /dev/null
+++ b/lib/crypto/doc/src/licenses.xml
@@ -0,0 +1,155 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE chapter SYSTEM "chapter.dtd">
+
+<chapter>
+  <header>
+    <copyright>
+      <year>2003</year><year>2009</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+    
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+    
+    </legalnotice>
+
+    <title>Licenses</title>
+    <prepared>Peter H&ouml;gfeldt</prepared>
+    <docno></docno>
+    <date>2003-05-26</date>
+    <rev>A</rev>
+    <file>licenses.xml</file>
+  </header>
+  <p>    <marker id="licenses"></marker>
+This chapter contains in extenso versions
+    of the OpenSSL and SSLeay licenses.
+    </p>
+
+  <section>
+    <title>OpenSSL License</title>
+    <code type="none">
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    [email protected].
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * ([email protected]).  This product includes software written by Tim
+ * Hudson ([email protected]).
+ *
+ */    </code>
+  </section>
+
+  <section>
+    <title>SSLeay License</title>
+    <code type="none">
+/* Copyright (C) 1995-1998 Eric Young ([email protected])
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young ([email protected]).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson ([email protected]).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young ([email protected])"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson ([email protected])"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */    </code>
+  </section>
+</chapter>
+
diff --git a/lib/crypto/doc/src/make.dep b/lib/crypto/doc/src/make.dep
new file mode 100644
index 0000000000..73b090bbb6
--- /dev/null
+++ b/lib/crypto/doc/src/make.dep
@@ -0,0 +1,20 @@
+# ----------------------------------------------------
+# >>>> Do not edit this file <<<<
+# This file was automaticly generated by
+# /home/otp/bin/docdepend
+# ----------------------------------------------------
+
+
+# ----------------------------------------------------
+# TeX files that the DVI file depend on
+# ----------------------------------------------------
+
+book.dvi: book.tex crypto.tex crypto_app.tex licenses.tex \
+		ref_man.tex usersguide.tex
+
+# ----------------------------------------------------
+# Source inlined when transforming from source to LaTeX
+# ----------------------------------------------------
+
+book.tex: ref_man.xml
+
diff --git a/lib/crypto/doc/src/note.gif b/lib/crypto/doc/src/note.gif
new file mode 100644
index 0000000000..6fffe30419
--- /dev/null
+++ b/lib/crypto/doc/src/note.gif
diff --git a/lib/crypto/doc/src/notes.xml b/lib/crypto/doc/src/notes.xml
new file mode 100644
index 0000000000..bbdd2d873b
--- /dev/null
+++ b/lib/crypto/doc/src/notes.xml
@@ -0,0 +1,469 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE chapter SYSTEM "chapter.dtd">
+
+<chapter>
+  <header>
+    <copyright>
+      <year>1999</year><year>2009</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+    
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+    
+    </legalnotice>
+
+    <title>Crypto Release Notes</title>
+    <prepared>Peter H&ouml;gfeldt</prepared>
+    <docno></docno>
+    <date>2003-06-06</date>
+    <rev>B</rev>
+    <file>notes.xml</file>
+  </header>
+  <p>This document describes the changes made to the Crypto application.</p>
+
+<section><title>Crypto 1.6.3</title>
+
+    <section><title>Fixed Bugs and Malfunctions</title>
+      <list>
+        <item>
+          <p>
+	    Suppressed false valgrind errors caused by libcrypto
+	    using uninitialized data as entropy.</p>
+          <p>
+	    Own Id: OTP-8200</p>
+        </item>
+      </list>
+    </section>
+
+
+    <section><title>Improvements and New Features</title>
+      <list>
+        <item>
+          <p>
+	    The documentation is now built with open source tools
+	    (xsltproc and fop) that exists on most platforms. One
+	    visible change is that the frames are removed.</p>
+          <p>
+	    Own Id: OTP-8201</p>
+        </item>
+        <item>
+          <p>
+	    When the crypto application failed to load the
+	    OpenSSL/LibEAY shared object, error indication was
+	    sparse. Now a more specific error message is sent to the
+	    error logger.</p>
+          <p>
+	    Own Id: OTP-8281</p>
+        </item>
+      </list>
+    </section>
+
+</section>
+
+<section><title>Crypto 1.6.2</title>
+
+    <section><title>Fixed Bugs and Malfunctions</title>
+      <list>
+        <item>
+          <p>
+            Fixed emulator crash caused by crypto using an old
+            openssl version that did not cope with large file
+            descriptors.</p>
+          <p>
+            Own Id: OTP-8261 Aux Id: seq11434 </p>
+        </item>
+      </list>
+    </section>
+
+</section>
+
+<section><title>Crypto 1.6.1</title>
+
+    <section><title>Fixed Bugs and Malfunctions</title>
+      <list>
+        <item>
+          <p>
+	    <c>Makefile.in</c> has been updated to use the LDFLAGS
+	    environment variable (if set). (Thanks to Davide
+	    Pesavento.)</p>
+          <p>
+	    Own Id: OTP-8157</p>
+        </item>
+      </list>
+    </section>
+
+
+    <section><title>Improvements and New Features</title>
+      <list>
+        <item>
+          <p>
+	    Support for Blowfish cfb64 added to <c>crypto</c>.</p>
+          <p>
+	    Own Id: OTP-8096</p>
+        </item>
+        <item>
+          <p>
+	    New function <c>crypto:aes_cbc_ivec</c></p>
+          <p>
+	    Own Id: OTP-8141</p>
+        </item>
+      </list>
+    </section>
+
+</section>
+
+<section><title>Crypto 1.6</title>
+
+    <section><title>Fixed Bugs and Malfunctions</title>
+      <list>
+        <item>
+          <p>
+	    The <c>dh_compute_key</c> sometimes returned a
+	    SharedSecret of incorrect size.</p>
+          <p>
+	    Own Id: OTP-7674</p>
+        </item>
+      </list>
+    </section>
+
+
+    <section><title>Improvements and New Features</title>
+      <list>
+        <item>
+          <p>
+	    Optimization for drivers by creating small binaries
+	    direct on process heap.</p>
+          <p>
+	    Own Id: OTP-7762</p>
+        </item>
+      </list>
+    </section>
+
+</section>
+
+<section><title>Crypto 1.5.3</title>
+
+    <section><title>Improvements and New Features</title>
+      <list>
+        <item>
+          <p>
+            Added new functions: dss_verify/3, rsa_verify/3,
+            rsa_verify/4, dss_sign/2, rsa_sign/2, rsa_sign/3,
+            rsa_public_encrypt, rsa_private_decrypt/3,
+            rsa_private_encrypt/3, rsa_public_decrypt/3,
+            dh_generate_key/1, dh_generate_key/2, dh_compute_key/3.</p>
+          <p>
+            Own Id: OTP-7545</p>
+        </item>
+      </list>
+    </section>
+
+</section>
+
+<section><title>Crypto 1.5.2.1</title>
+
+    <section><title>Improvements and New Features</title>
+      <list>
+        <item>
+          <p>
+	    Minor performance optimization.</p>
+          <p>
+	    Own Id: OTP-7521</p>
+        </item>
+      </list>
+    </section>
+
+</section>
+
+<section><title>Crypto 1.5.2</title>
+
+    <section><title>Fixed Bugs and Malfunctions</title>
+      <list>
+        <item>
+          <p>
+	    ./configure has been improved to find 64-bit OpenSSL
+	    libraries.</p>
+          <p>
+	    Own Id: OTP-7270</p>
+        </item>
+      </list>
+    </section>
+
+
+    <section><title>Improvements and New Features</title>
+      <list>
+        <item>
+          <p>
+	    crypto and zlib drivers improved to allow concurent smp
+	    access.</p>
+          <p>
+	    Own Id: OTP-7262</p>
+        </item>
+      </list>
+    </section>
+
+</section>
+
+  <section>
+    <title>Crypto 1.5.1.1</title>
+
+    <section>
+      <title>Improvements and New Features</title>
+      <list type="bulleted">
+        <item>
+          <p>The linked in driver for the crypto application is now
+            linked statically against the OpenSSL libraries, to avoid
+            installation and runtime problems in connection to the
+            OpenSSL library locations.</p>
+          <p>Own Id: OTP-6680</p>
+        </item>
+        <item>
+          <p>Minor Makefile changes.</p>
+          <p>Own Id: OTP-6689</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.5</title>
+
+    <section>
+      <title>Improvements and New Features</title>
+      <list type="bulleted">
+        <item>
+          <p>It is now explicitly checked at start-up that the crypto
+            driver is properly loaded (Thanks to Claes Wikstrom).</p>
+          <p>Own Id: OTP-6109</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.4</title>
+
+    <section>
+      <title>Improvements and New Features</title>
+      <list type="bulleted">
+        <item>
+          <p>The previously undocumented and UNSUPPORTED <c>ssh</c>
+            application has been updated and documented. This release
+            of the <c>ssh</c> application is still considered to be a
+            beta release and (if necessary) there could still be
+            changes in its API before it reaches 1.0.</p>
+          <p>Also, more cryptographic algorithms have been added to
+            the <c>crypto</c> application.</p>
+          <p>*** POTENTIAL INCOMPATIBILITY ***</p>
+          <p>Own Id: OTP-5631</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.3</title>
+
+    <section>
+      <title>Improvements and New Features</title>
+      <list type="bulleted">
+        <item>
+          <p>Added support for RFC 3826 - The Advanced Encryption Standard 
+            (AES) Cipher Algorithm in the SNMP User-based Security Model.
+                        <br></br>
+Martin Bj&ouml;rklund</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.2.3</title>
+
+    <section>
+      <title>Fixed Bugs and Malfunctions</title>
+      <list type="bulleted">
+        <item>
+          <p>Linked in drivers in the crypto, and asn1 applications
+            are now compiled with the -D_THREAD_SAFE and -D_REENTRANT
+            switches on unix when the emulator has thread support
+            enabled.</p>
+          <p>Linked in drivers on MacOSX are not compiled with the
+            undocumented -lbundle1.o switch anymore. Thanks to Sean
+            Hinde who sent us a patch.</p>
+          <p>Linked in driver in crypto, and port programs in ssl, now
+            compiles on OSF1.</p>
+          <p>Minor makefile improvements in runtime_tools.</p>
+          <p>Own Id: OTP-5346</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.2.2</title>
+
+    <section>
+      <title>Improvements and New Features</title>
+      <list type="bulleted">
+        <item>
+          <p>Corrected error handling. If the port to the driver that
+            crypto uses is unexpectedly closed (which should not
+            happen during normal operation of crypto), crypto will
+            terminate immediately (rather than crashing the next time
+            crypto is used). Also corrected build problems on Mac OS
+            X.</p>
+          <p>Own Id: OTP-5279</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.2.1</title>
+
+    <section>
+      <title>Fixed Bugs and Malfunctions</title>
+      <list type="bulleted">
+        <item>
+          <p>It was not possible in R9 to relink the crypto driver.
+            The object file was missing as well as an example
+            makefile. The crypto driver object file is now released
+            with the application (installed in priv/obj). An example
+            makefile has also been added to the priv/obj directory.
+            The makefile serves as an example of how to relink the
+            driver on Unix (crypto_drv.so) or Windows
+            (crypto_drv.dll).</p>
+          <p>Own Id: OTP-4828 Aux Id: seq8193 </p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.2</title>
+
+    <section>
+      <title>Improvements and New Features</title>
+      <list type="bulleted">
+        <item>
+          <p>Previous versions of Crypto where delivered with
+            statically linked binaries based on SSLeay. That is not
+            longer the case.  The current version of Crypto requires
+            dynamically linked OpenSSL libraries that the user has to
+            install. The library needed is <c>libcrypto.so</c> (Unix)
+            or <c>libeay32.[lib|dll]</c> (Win32). For further details
+            see the crypto(6) application manual page.</p>
+        </item>
+        <item>
+          <p>This version of Crypto uses the new DES interface of
+            OpenSSL 0.9.7, which is not backward compatible with
+            earlier versions of OpenSSL.
+            </p>
+        </item>
+        <item>The functions <c>des_ede3_cbc_encrypt/5</c> and
+        <c>des_ede3_cbc_decrypt/5</c> have been renamed to
+        <c>des3_cbc_encrypt/5</c> and <c>des3_cbc_decrypt/5</c>,
+         respectively. The old functions have been retained (they are
+         deprecated and not listed in the crypto(3) manual page).</item>
+      </list>
+    </section>
+
+    <section>
+      <title>Reported Fixed Bugs and Malfunctions</title>
+      <list type="bulleted">
+        <item>
+          <p>The start of crypto failed on Windows, due to erroneous addition
+            of a DES3 algorithm.</p>
+          <p>Own Id: OTP-4684
+                        <br></br>
+Aux Id: seq7864</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.1.3</title>
+
+    <section>
+      <title>Reported Fixed Bugs and Malfunctions</title>
+      <list type="bulleted">
+        <item>To obtain backward compatibility with the old SSLeay
+         package, and with earlier versions of OpenSSL, the macro
+         OPENSSL_DES_LIBDES_COMPATIBILITY has been added to
+        <c>crypto_drv.c</c>. This is of importance only for the open
+         source version of Crypto.
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.1.2</title>
+
+    <section>
+      <title>Reported Fixed Bugs and Malfunctions</title>
+      <list type="bulleted">
+        <item>
+          <p>In the manual page <c>crypto(3)</c> the function names
+            <c>md5_finish</c> and <c>sha_finish</c> have been changed to
+            <c>md5_final</c> and <c>sha_final</c> to correctly document
+            the implementation.</p>
+          <p>Own Id: OTP-3409
+            </p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.1.1</title>
+    <p>Code replacement in runtime is supported. Upgrade can be done from
+      from version 1.1 and downgrade to version 1.1.
+      </p>
+
+    <section>
+      <title>Improvements and New Features</title>
+      <list type="bulleted">
+        <item>
+          <p>The driver part of the Crypto application has been
+            updated to use the erl_driver header file. Version 1.1.1
+            requires emulator version 4.9.1 or later.</p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.1</title>
+
+    <section>
+      <title>Reported Fixed Bugs and Malfunctions</title>
+      <list type="bulleted">
+        <item>
+          <p>On Windows the crypto_drv was incorrectly linked to
+            static run-time libraries instead of dynamic ones.</p>
+          <p>Own Id: OTP-3240
+            </p>
+        </item>
+      </list>
+    </section>
+  </section>
+
+  <section>
+    <title>Crypto 1.0</title>
+    <p>New application.
+      </p>
+  </section>
+</chapter>
+
diff --git a/lib/crypto/doc/src/ref_man.xml b/lib/crypto/doc/src/ref_man.xml
new file mode 100644
index 0000000000..f801221c81
--- /dev/null
+++ b/lib/crypto/doc/src/ref_man.xml
@@ -0,0 +1,49 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE application SYSTEM "application.dtd">
+
+<application xmlns:xi="http://www.w3.org/2001/XInclude">
+  <header>
+    <copyright>
+      <year>1999</year><year>2009</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+    
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+    
+    </legalnotice>
+
+    <title>Crypto Reference Manual</title>
+    <prepared>Peter H&ouml;gfeldt</prepared>
+    <docno></docno>
+    <date>2003-06-01</date>
+    <rev>B</rev>
+    <file>refman.sgml</file>
+  </header>
+  <description>
+    <p>The Crypto Application provides functions for computation of 
+      message digests, and encryption and decryption functions.
+      </p>
+    <p>This product includes software developed by the OpenSSL Project for
+      use in the OpenSSL Toolkit (http://www.openssl.org/).
+      </p>
+    <p>This product includes cryptographic software written by Eric Young
+      ([email protected]).  
+      </p>
+    <p>This product includes software written by Tim Hudson
+      ([email protected]).
+      </p>
+    <p>For full OpenSSL and SSLeay license texts, see <seealso marker="licenses#licenses">Licenses</seealso>.</p>
+  </description>
+  <xi:include href="crypto_app.xml"/>
+  <xi:include href="crypto.xml"/>
+</application>
+
diff --git a/lib/crypto/doc/src/release_notes.xml b/lib/crypto/doc/src/release_notes.xml
new file mode 100644
index 0000000000..0c2ee23e22
--- /dev/null
+++ b/lib/crypto/doc/src/release_notes.xml
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE part SYSTEM "part.dtd">
+
+<part>
+  <header>
+    <copyright>
+      <year>1999</year>
+      <year>2007</year>
+      <holder>Ericsson AB, All Rights Reserved</holder>
+    </copyright>
+    <legalnotice>
+  The contents of this file are subject to the Erlang Public License,
+  Version 1.1, (the "License"); you may not use this file except in
+  compliance with the License. You should have received a copy of the
+  Erlang Public License along with this software. If not, it can be
+  retrieved online at http://www.erlang.org/.
+
+  Software distributed under the License is distributed on an "AS IS"
+  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+  the License for the specific language governing rights and limitations
+  under the License.
+
+  The Initial Developer of the Original Code is Ericsson AB.
+    </legalnotice>
+
+    <title>Crypto Release Notes</title>
+    <prepared>Peter Hj&ouml;gfeldt</prepared>
+    <docno></docno>
+    <date>2003-06-01</date>
+    <rev>B</rev>
+    <file>release_notes.sgml</file>
+  </header>
+  <description>
+    <p>The Crypto Application provides functions for computation of 
+      message digests, and encryption and decryption functions.
+      </p>
+    <p>This product includes software developed by the OpenSSL Project for
+      use in the OpenSSL Toolkit (http://www.openssl.org/).
+      </p>
+    <p>This product includes cryptographic software written by Eric Young
+      ([email protected]).  
+      </p>
+    <p>This product includes software written by Tim Hudson
+      ([email protected]).
+      </p>
+    <p>For full OpenSSL and SSLeay license texts, see <seealso marker="licenses#licenses">Licenses</seealso>.</p>
+  </description>
+  <include file="notes"></include>
+</part>
+
diff --git a/lib/crypto/doc/src/usersguide.xml b/lib/crypto/doc/src/usersguide.xml
new file mode 100644
index 0000000000..dc5bf520a9
--- /dev/null
+++ b/lib/crypto/doc/src/usersguide.xml
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE part SYSTEM "part.dtd">
+
+<part xmlns:xi="http://www.w3.org/2001/XInclude">
+  <header>
+    <copyright>
+      <year>2003</year><year>2009</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+    
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+    
+    </legalnotice>
+
+    <title>Crypto User's Guide</title>
+    <prepared>OTP Team</prepared>
+    <docno></docno>
+    <date>2003-06-01</date>
+    <rev>C</rev>
+    <file>usersguide.sgml</file>
+  </header>
+  <description>
+    <p>The <em>Crypto</em> application provides functions for
+      computation of message digests, and functions for encryption and
+      decryption.
+      </p>
+    <p>This product includes software developed by the OpenSSL Project
+      for use in the OpenSSL Toolkit (http://www.openssl.org/).
+      </p>
+    <p>This product includes cryptographic software written by Eric
+      Young ([email protected]).
+      </p>
+    <p>This product includes software written by Tim Hudson
+      ([email protected]).
+      </p>
+    <p>For full OpenSSL and SSLeay license texts, see <seealso marker="licenses#licenses">Licenses</seealso>.
+      </p>
+  </description>
+  <xi:include href="licenses.xml"/>
+</part>
+
diff --git a/lib/crypto/doc/src/warning.gif b/lib/crypto/doc/src/warning.gif
new file mode 100644
index 0000000000..96af52360e
--- /dev/null
+++ b/lib/crypto/doc/src/warning.gif