diameter: Remove VxWorks

10 files changed, 0 insertions, 681 deletions

diff --git a/lib/diameter/autoconf/configure.vxworks b/lib/diameter/autoconf/configure.vxworks
deleted file mode 100755
index 33aa497680..0000000000
--- a/lib/diameter/autoconf/configure.vxworks
+++ /dev/null
@@ -1,147 +0,0 @@
-#!/bin/sh
-# 
-# %CopyrightBegin%
-# 
-# Copyright Ericsson AB 1997-2011. All Rights Reserved.
-# 
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-# 
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-# 
-# %CopyrightEnd%
-# 
-# Author:
-#         Patrik Winroth 
-#
-
-
-# vxworks_ppc860 vxworks_ppc603 vxworks_ppc603_longcall vxworks_cpu32 vxworks_sparc 
-# vxworks_ppc750 vxworks_simso
-
-case $# in
-1) host=$1 ;;
-*) echo "usage: configure.vxworks host-configuration"; exit 1 ;;
-esac
-
-case $1 in
-vxworks_cpu32) ;;
-vxworks_ppc750) ;;
-vxworks_ppc860) ;;
-vxworks_ppc603) ;;
-vxworks_ppc603_nolongcall) ;;
-vxworks_sparc) ;;
-vxworks_simso) ;;
-vxworks_simlinux) ;;
-vxworks_ppc32) ;;
-*) echo "usage: configure.vxworks TARGET";
-   echo "where TARGET is one of vxworks_cpu32, vxworks_ppc750, vxworks_ppc860, vxworks_ppc603, vxworks_ppc603_nolongcall, vxworks_sparc, vxworks_simso, vxworks_simlinux, vxworks_ppc32"; exit 1;;
-esac
-
-if [ "x$ERL_TOP" = x ]; then
-    echo "You need to set ERL_TOP!"
-    exit 1
-fi
-
-
-target=$host
-
-# Find out the HOST and WIND_BASE environment
-HOST_TYPE=${HOST_TYPE:=sun4-solaris2}
-case $1 in
-vxworks_ppc750) VXTOP=Tornado2.2 ;;
-vxworks_simso)  VXTOP=WindRiver ;;
-vxworks_simlinux)  VXTOP=WindRiver ;;
-vxworks_ppc32)  VXTOP=WindRiver ;;
-*)              VXTOP=wind ;;
-esac
-
-WIND_BASE=${WIND_BASE:=`ypmatch tornado passwd | awk -F: '{print $6}'`/$VXTOP}
-
-# These are created by autoconf.
-MKDIRS="${ERL_TOP}/lib/os_mon/priv/bin/$target
-        ${ERL_TOP}/lib/os_mon/priv/obj/$target
-        ${ERL_TOP}/lib/orber/priv/obj/$target
-        ${ERL_TOP}/lib/orber/priv/bin/$target
-        ${ERL_TOP}/lib/ic/priv/lib/$target
-        ${ERL_TOP}/lib/ic/priv/obj/$target
-        ${ERL_TOP}/lib/asn1/priv/lib/$target
-        ${ERL_TOP}/lib/asn1/priv/obj/$target
-        ${ERL_TOP}/lib/erl_interface/obj/$target
-        ${ERL_TOP}/lib/erl_interface/obj.debug/$target
-        ${ERL_TOP}/lib/erl_interface/bin/$target
-        ${ERL_TOP}/lib/runtime_tools/priv/lib/$target
-        ${ERL_TOP}/lib/runtime_tools/priv/obj/$target
-	${ERL_TOP}/erts/obj/$target
-	${ERL_TOP}/erts/obj.debug/$target
-	${ERL_TOP}/bin/$target"
-
-for dir in $MKDIRS; do
-  test ! -d "$dir" && mkdir -p "$dir"
-done
-
-#
-# Create Makefiles for vxWorks.
-#
-my_root=${ERL_TOP}/erts/emulator
-emu_test=$my_root/test
-beam=$my_root/beam
-erts_lib_src=${ERL_TOP}/erts/lib_src
-erts_incl=${ERL_TOP}/erts/include
-erts_incl_intrnl=${ERL_TOP}/erts/include/internal
-etcdir=${ERL_TOP}/erts/etc/common
-erlint_dir=${ERL_TOP}/lib/erl_interface/src
-epmd_dir=${ERL_TOP}/erts/epmd/src
-os_mon_dir=${ERL_TOP}/lib/os_mon/c_src
-orber_dir=${ERL_TOP}/lib/orber/c_src
-ic_dir=${ERL_TOP}/lib/ic/c_src
-asn1_dir=${ERL_TOP}/lib/asn1/c_src
-internal_tools_dir=${ERL_TOP}
-libdir=${ERL_TOP}/lib
-tsdir=$libdir/test_server/src
-zlibdir=${ERL_TOP}/erts/emulator/zlib
-runtime_tools_dir=${ERL_TOP}/lib/runtime_tools/c_src
-tools_dir=${ERL_TOP}/lib/tools/c_src
-
-CONFIG_FILES="${ERL_TOP}/erts/emulator/$host/Makefile
-	    $erts_lib_src/$host/Makefile
-	    $erts_incl/$host/erl_int_sizes_config.h
-	    $erts_incl_intrnl/$host/ethread.mk
-	    $erts_incl_intrnl/$host/ethread_header_config.h
-	    $etcdir/$host/Makefile
-	    $erlint_dir/$host/Makefile
-	    $erlint_dir/$host/eidefs.mk
-	    $epmd_dir/$host/Makefile
-	    $internal_tools_dir/make/$host/otp.mk
-	    $os_mon_dir/$host/Makefile
-	    $zlibdir/$host/Makefile
-	    $ic_dir/$host/Makefile
-	    $asn1_dir/$host/Makefile
-	    $runtime_tools_dir/$host/Makefile
-	    $tools_dir/$host/Makefile
-	    $orber_dir/$host/Makefile"
-
-for file in $CONFIG_FILES; do
-    new_name=`echo $file|sed "s%/$host/%/$target/%"`
-    dir=`echo $new_name|sed 's%/[^/][^/]*$%%'`
-    if test "$dir" != "$new_name" && test "$dir" != .; then
-	test ! -d "$dir" && mkdir "$dir"
-    fi
-
-    sole_name=`echo $file|sed "s%.*$target/%%"`
-    in_file=`echo $dir|sed "s%/[^/][^/]*$%/$sole_name.in%"`
-    echo "creating $new_name"
-    sed -f vxworks/sed.$target -f vxworks/sed.general \
-	-e "s,@HOST_TYPE@,$HOST_TYPE,g" \
-	-e "s,@WIND_BASE@,$WIND_BASE,g" \
-	-e "s,@TARGET@,$target,g" \
-	$in_file > $new_name
-done
-
-
diff --git a/lib/diameter/autoconf/vxworks/sed.general b/lib/diameter/autoconf/vxworks/sed.general
deleted file mode 100644
index 9199983e16..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.general
+++ /dev/null
@@ -1,124 +0,0 @@
-# 
-# %CopyrightBegin%
-# 
-# Copyright Ericsson AB 1997-2011. All Rights Reserved.
-# 
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-# 
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-# 
-# %CopyrightEnd%
-# 
-# Author: Patrik Winroth
-#
-# This sed program file is intended to be used when creating Makefiles
-# for vxworks from the generic Makefile.in that is found in a number
-# of directories (see configure.vxworks).
-#
-# This is the general part that is common for all architectures.
-#
-
-# Size of data types.
-s|^#undef SIZEOF_CHAR|#define SIZEOF_CHAR 1|
-s|^#undef SIZEOF_SHORT|#define SIZEOF_SHORT 2|
-s|^#undef SIZEOF_INT|#define SIZEOF_INT 4|
-s|^#undef SIZEOF_LONG_LONG|#define SIZEOF_LONG_LONG 8|
-s|^#undef SIZEOF_LONG$|#define SIZEOF_LONG 4|
-
-# General stuff.
-s|@erts_rootdir@|/clearcase/otp/erts|
-
-s|@LIBOBJS@|$(OBJDIR)/elib_malloc.o|
-s|@DLOAD_LIB@||
-s|@LDFLAGS@||
-# FIXME: A bit strange to clear out remaining DED_*
-s|@DED_LDFLAGS@||
-s|@DED_CFLAGS@||
-s|@STATIC_CFLAGS@||
-s|@GCCLIB@|libgcc.a|
-s|@DEFS@||
-s|@DEXPORT@||
-s|@DCFLAGS@||
-s|@THR_DEFS@||
-s|@THR_LIBS@||
-s|@THR_LIB_NAME@||
-s|@THR_X_LIBS@||
-s|@ETHR_X_LIBS@||
-s|@ETHR_LIBS@||
-s|@ETHR_LIB_NAME@||
-s|@ETHR_DEFS@||
-s|@ETHR_THR_LIB_BASE@||
-s|@EMU_THR_DEFS@||
-s|@EMU_THR_LIBS@||
-s|@EMU_THR_LIB_NAME@|ethread|
-s|@ERTS_ENABLE_KERNEL_POLL@|no|
-s|@cc_root@|/clearcase/otp/|
-# Define VxWorks even though cross-compiling. 
-s|@HCFLAGS@|-DVXWORKS|
-s|@HCLIBS@||
-s|@ENABLE_ALLOC_TYPE_VARS@||
-s|@TERMCAP_LIB@||
-s|@ERTS_BUILD_SMP_EMU@|no|
-s|@HAVE_VALGRIND@|no|
-s|@EXEEXT@||
-s|@WITH_SCTP@||
-
-# HiPE
-s|@HIPE_ENABLED@||
-s|@PERFCTR_PATH@||
-s|@USE_PERFCTR@||
-
-# m4
-s|@OPSYS@|noopsys|
-
-# Conditional inclusion of applications
-s|@HIPE_APP@||
-s|@SSL_APP@|ssl|
-s|@CRYPTO_APP@|crypto|
-s|@SSH_APP@|ssh|
-
-# The target tools prefix, prepended to all cc,ld,as etc commands
-s|@TTPREFIX@|GCC_EXEC_PREFIX=@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/host/@HOST_TYPE@/bin/|
-
-# Install programs etc
-s|@PERL@|perl|
-s|@INSTALL@|/usr/ucb/install -c|
-s|@INSTALL_PROGRAM@|${INSTALL}|
-s|@INSTALL_SCRIPT@|${INSTALL}|
-s|@INSTALL_DATA@|${INSTALL} -m 644|
-s|@INSTALL_DIR@|$(INSTALL) -d|
-s|@RM@|/bin/rm|
-s|@MKDIR@|/bin/mkdir|
-s|@ERLANG_OSTYPE@|vxworks|
-s|@vxworks_reclaim@|reclaim.h|
-s|@os_mon_programs@||
-s|@erlexec@|erl.exec|
-s|@EMU_LIBOBJS@||
-
-# General CFLAGS
-s|@GENERAL_CFLAGS@|-DHAVE_LOCALTIME_R -DHAVE_GMTIME_R -DENABLE_ELIB_MALLOC -DELIB_HEAP_USER -DELIB_SORTED_BLOCKS -DWORDS_BIGENDIAN -DELIB_DONT_INITIALIZE -DSIZEOF_CHAR=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DSIZEOF_LONG_LONG=8 -DSIZEOF_VOID_P=4 -DERTS_USE_PORT_TASKS=1|g
-s|@WFLAGS@||
-
-# Thread flags for eidefs.mk (erl_interface)
-s|@EI_THREADS@|false|
-
-# Make java code compile although we don't test it on VxWorks (no license)
-s|@JAVAC@|javac|
-
-# What is this anyway?
-# Disable it and see what breaks.
-#s|@ded_soname@||
-
-# Only variable substituted directly
-s|$(LDFLAGS)|-r -d|
-s|@LIBRT@||
-# XXX What is EFFLAGS? Not used in the emulator Makefile.in anyway.
-s|$(EFLAGS)|-DENABLE_ELIB_MALLOC -DELIB_HEAP_USER -DELIB_SORTED_BLOCKS|
-
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_cpu32 b/lib/diameter/autoconf/vxworks/sed.vxworks_cpu32
deleted file mode 100644
index 5a1590e786..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_cpu32
+++ /dev/null
@@ -1,45 +0,0 @@
-# 
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 1997-2011. All Rights Reserved.
-#
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-#
-# %CopyrightEnd%
-# 
-# Author: Patrik Winroth
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-#
-#
-s|@host@|vxworks_cpu32|
-s|@system_type@|vxworks_cpu32|
-s|@CC@|@TTPREFIX@cc68k|
-s|@HCC@|gcc|
-s|@LD@|@TTPREFIX@ld68k|
-s|@LIBS@||
-s|@DED_LD@|@TTPREFIX@ld68k|
-s|@DED_CFLAGS@|@CFLAGS@|
-s|@DEBUG_FLAGS@|-g|
-s|@GCCLIB_PATH@|@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/m68k-wrs-vxworks/cygnus-2.7.2-960126/m68000/msoft-float/libgcc.a|
-s|@RANLIB@|@TTPREFIX@ranlib68k|
-s|@AR@|@TTPREFIX@ar68k|
-s|@STRIP@|@TTPREFIX@strip68k|
-s|@SYMPREFIX@|_|
-s|@GCCLIBFLAGS@|-L@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/m68k-wrs-vxworks/cygnus-2.7.2-960126/m68000/msoft-float -lgcc|
-
-s|@LIB_CFLAGS@|@CFLAGS@|
-
-s|@CFLAGS@|@GENERAL_CFLAGS@ -DCPU=CPU32 -mnobitfield -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -fno-builtin -nostdinc -fvolatile -msoft-float|
-#s|@LIB_CFLAGS@|@GENERAL_CFLAGS@ -DCPU=CPU32 -mnobitfield -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -fno-builtin -nostdinc -fvolatile -msoft-float|
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc32 b/lib/diameter/autoconf/vxworks/sed.vxworks_ppc32
deleted file mode 100644
index 9104b24ed3..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc32
+++ /dev/null
@@ -1,52 +0,0 @@
-# 
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 2006-2011. All Rights Reserved.
-#
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-#
-# %CopyrightEnd%
-# 
-# Author: Peter Andersson
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-#
-#
-s|@host@|vxworks_ppc32|
-s|@system_type@|vxworks_ppc32|
-s|@ARCH@|ppc32|
-s|@CC@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ccppc -mlongcall|
-s|@HCC@|gcc|
-s|@LD@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ldppc|
-s|@STRIP@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/workbench-2.3/@HOST_TYPE@/bin/stripppc|
-s|@SYMPREFIX@||
-s|@LIBS@||
-s|@GCCLIBFLAGS@|-L@WIND_BASE@/vxworks-6.3/target/lib/ppc/PPC32/common -lgcc|
-s|@DED_LD@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ldppc|
-s|@DED_CFLAGS@|@CFLAGS@|
-s|@DEBUG_CFLAGS@|@CFLAGS@|
-# generate dwarf debug code on PPC ..
-s|@DEBUG_FLAGS@|-gdwarf|
-# remove -g option
-s|TYPE_FLAGS = -g |TYPE_FLAGS = |
-s|@GCCLIB_PATH@|@WIND_BASE@/vxworks-6.3/target/lib/ppc/PPC32/common/libgcc.a|
-s|@RANLIB@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ranlibppc|
-s|@AR@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/arppc|
-# -Dasm(X)= is for beam
-
-s|@LIB_CFLAGS@|@CFLAGS@|
-
-s|@CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/vxworks-6.3/target/h -I@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc/powerpc-wrs-vxworks/3.4.4/include -I@WIND_BASE@/vxworks-6.3/target/h/wrn/coreip -mstrict-align -fvolatile -fno-builtin |
-
-#s|@LIB_CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/vxworks-6.3/target/h/wrn/coreip -I@WIND_BASE@/vxworks-6.3/target/h  -mstrict-align -fvolatile -fno-builtin |
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc603 b/lib/diameter/autoconf/vxworks/sed.vxworks_ppc603
deleted file mode 100644
index e1dd7c5afd..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc603
+++ /dev/null
@@ -1,51 +0,0 @@
-# 
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 2000-2011. All Rights Reserved.
-#
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-#
-# %CopyrightEnd%
-# 
-# Author: Patrik Winroth
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-#
-#
-s|@host@|vxworks_ppc603|
-s|@system_type@|vxworks_ppc603|
-s|@ARCH@|ppc603|
-s|@CC@|@TTPREFIX@ccppc -mlongcall|
-s|@HCC@|gcc|
-s|@LD@|@TTPREFIX@ldppc|
-s|@STRIP@|@TTPREFIX@stripppc|
-s|@SYMPREFIX@||
-s|@LIBS@||
-s|@GCCLIBFLAGS@|-L@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126 -lgcc|
-s|@DED_LD@|@TTPREFIX@ldppc|
-s|@DED_CFLAGS@|@CFLAGS@|
-s|@DEBUG_CFLAGS@|@CFLAGS@|
-# generate dwarf debug code on PPC ..
-s|@DEBUG_FLAGS@|-gdwarf|
-# remove -g option
-s|TYPE_FLAGS = -g |TYPE_FLAGS = |
-s|@GCCLIB_PATH@|@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126/libgcc.a|
-s|@RANLIB@|@TTPREFIX@ranlibppc|
-s|@AR@|@TTPREFIX@arppc|
-# -Dasm(X)= is for beam
-
-s|@LIB_CFLAGS@|@CFLAGS@|
-
-s|@CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC603 -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -mstrict-align -fvolatile -fno-builtin -fno-for-scope -D_GNU_TOOL|
-#s|@LIB_CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC603 -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -mstrict-align -fvolatile -fno-builtin -fno-for-scope -D_GNU_TOOL|
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc603_nolongcall b/lib/diameter/autoconf/vxworks/sed.vxworks_ppc603_nolongcall
deleted file mode 100644
index 5d7673d323..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc603_nolongcall
+++ /dev/null
@@ -1,51 +0,0 @@
-# 
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 1997-2011. All Rights Reserved.
-#
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-#
-# %CopyrightEnd%
-# 
-# Author: Patrik Winroth
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-#
-#
-s|@host@|vxworks_ppc603|
-s|@system_type@|vxworks_ppc603|
-s|@ARCH@|ppc603|
-s|@CC@|@TTPREFIX@ccppc|
-s|@HCC@|gcc|
-s|@LD@|@TTPREFIX@ldppc|
-s|@STRIP@|@TTPREFIX@stripppc|
-s|@SYMPREFIX@||
-s|@LIBS@||
-s|@GCCLIBFLAGS@|-L@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126 -lgcc|
-s|@DED_LD@|@TTPREFIX@ldppc|
-s|@DED_CFLAGS@|@CFLAGS@|
-# generate dwarf debug code on PPC ..
-s|@DEBUG_FLAGS@|-gdwarf|
-# remove -g option
-s|TYPE_FLAGS = -g |TYPE_FLAGS = |
-s|@GCCLIB_PATH@|@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126/libgcc.a|
-s|@RANLIB@|@TTPREFIX@ranlibppc|
-s|@AR@|@TTPREFIX@arppc|
-# -Dasm(X)= is for beam
-
-s|@LIB_CFLAGS@|@CFLAGS@|
-
-s|@CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC603 -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -mstrict-align -fvolatile -fno-builtin -fno-for-scope -D_GNU_TOOL|
-#s|@LIB_CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC603 -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -mstrict-align -fvolatile -fno-builtin -fno-for-scope -D_GNU_TOOL|
-
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc860 b/lib/diameter/autoconf/vxworks/sed.vxworks_ppc860
deleted file mode 100644
index 7a3c32df5b..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_ppc860
+++ /dev/null
@@ -1,50 +0,0 @@
-# 
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 1997-2011. All Rights Reserved.
-#
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-#
-# %CopyrightEnd%
-# 
-# Author: Patrik Winroth
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-#
-#
-s|@host@|vxworks_ppc860|
-s|@system_type@|vxworks_ppc860|
-s|@ARCH@|ppc860|
-s|@CC@|@TTPREFIX@ccppc -mlongcall|
-s|@HCC@|gcc|
-s|@LD@|@TTPREFIX@ldppc|
-s|@STRIP@|@TTPREFIX@stripppc|
-s|@SYMPREFIX@||
-s|@LIBS@||
-s|@GCCLIBFLAGS@|-L@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126/soft-float -lgcc|
-s|@DED_LD@|@TTPREFIX@ldppc|
-s|@DED_CFLAGS@|@CFLAGS@|
-s|@DEBUG_CFLAGS@|@CFLAGS@|
-# generate dwarf debug code on PPC ..
-s|@DEBUG_FLAGS@|-gdwarf|
-# remove -g option (go for dwarf)
-s|TYPE_FLAGS = -g |TYPE_FLAGS = |
-s|@GCCLIB_PATH@|@WIND_BASE@/host/@HOST_TYPE@/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126/soft-float/libgcc.a|
-s|@RANLIB@|@TTPREFIX@ranlibppc|
-s|@AR@|@TTPREFIX@arppc|
-
-s|@LIB_CFLAGS@|@CFLAGS@|
-
-s|@CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC860 -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -mcpu=860 -fvolatile -fno-builtin -fno-for-scope -msoft-float -D_GNU_TOOL -nostdinc|
-#s|@LIB_CFLAGS@|@GENERAL_CFLAGS@ -DCPU=PPC860 -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DVXWORKS -I@WIND_BASE@/target/h -mcpu=powerpc -fvolatile -fno-builtin -fno-for-scope -msoft-float -D_GNU_TOOL -nostdinc|
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_simlinux b/lib/diameter/autoconf/vxworks/sed.vxworks_simlinux
deleted file mode 100644
index 56eae6507c..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_simlinux
+++ /dev/null
@@ -1,59 +0,0 @@
-# 
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 2008-2011. All Rights Reserved.
-#
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-#
-# %CopyrightEnd%
-# 
-# Author: Peter Andersson
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-#
-#
-s|@host@|vxworks_simlinux|
-s|@system_type@|vxworks_simlinux|
-s|@ARCH@|simlinux|
-
-s|@CC@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ccpentium|
-
-s|@HCC@|gcc|
-
-s|@LD@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ldpentium|
-
-#s|@STRIP@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/strip|
-s|@STRIP@||
-
-s|@SYMPREFIX@||
-s|@LIBS@||
-s|@GCCLIBFLAGS@|-L@WIND_BASE@/vxworks-6.3/target/lib/simlinux/SIMLINUX/common -lgcc|
-
-s|@DED_LD@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ldpentium|
-
-s|@DED_CFLAGS@|@CFLAGS@|
-s|@DEBUG_CFLAGS@|@CFLAGS@|
-# remove -g option
-s|TYPE_FLAGS = -g |TYPE_FLAGS = |
-s|@GCCLIB_PATH@|@WIND_BASE@/vxworks-6.3/target/lib/simlinux/SIMLINUX/common/libgcc.a|
-
-s|@RANLIB@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ranlibpentium|
-
-s|@AR@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/arpentium|
-
-# -Dasm(X)= is for beam
-s|@LIB_CFLAGS@|@CFLAGS@|
-
-s|@CFLAGS@|@GENERAL_CFLAGS@ -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -DDEBUG -I@WIND_BASE@/vxworks-6.3/target/h -I@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc/i586-wrs-vxworks/3.4.4/include -I@WIND_BASE@/vxworks-6.3/target/h/wrn/coreip -fvolatile -fno-builtin |
-#s|@LIB_CFLAGS@|@GENERAL_CFLAGS@ -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -DDEBUG -I@WIND_BASE@/vxworks-6.3/target/h -I@WIND_BASE@/vxworks-6.3/target/h/wrn/coreip -mstrict-align -fvolatile -fno-builtin |
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_simso b/lib/diameter/autoconf/vxworks/sed.vxworks_simso
deleted file mode 100644
index 6b845d31de..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_simso
+++ /dev/null
@@ -1,64 +0,0 @@
-# 
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 2005-2011. All Rights Reserved.
-#
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-#
-# %CopyrightEnd%
-# 
-# Author: Peter Andersson
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-#
-#
-s|@host@|vxworks_simso|
-s|@system_type@|vxworks_simso|
-s|@ARCH@|simso|
-
-# Tornado2.2: s|@CC@|@TTPREFIX@ccsimso|
-s|@CC@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ccsparc|
-
-s|@HCC@|gcc|
-
-# Tornado2.2: s|@LD@|@TTPREFIX@ldsimso|
-s|@LD@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ldsparc|
-
-# Tornado2.2: s|@STRIP@|@TTPREFIX@stripsimso|
-s|@STRIP@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/stripsparc|
-
-s|@SYMPREFIX@||
-s|@LIBS@||
-s|@GCCLIBFLAGS@|-L@WIND_BASE@/vxworks-6.3/target/lib/simso/SIMSPARCSOLARIS/common -lgcc|
-
-# Tornado2.2: s|@DED_LD@|@TTPREFIX@ldsimso|
-s|@DED_LD@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ldsparc|
-
-s|@DED_CFLAGS@|@CFLAGS@|
-s|@DEBUG_CFLAGS@|@CFLAGS@|
-# remove -g option
-s|TYPE_FLAGS = -g |TYPE_FLAGS = |
-s|@GCCLIB_PATH@|@WIND_BASE@/vxworks-6.3/target/lib/simso/SIMSPARCSOLARIS/common/libgcc.a|
-
-# Tornado2.2: s|@RANLIB@|@TTPREFIX@ranlibsimso|
-s|@RANLIB@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/ranlibsparc|
-
-# Tornado2.2: s|@AR@|arsimso|
-s|@AR@|GCC_EXEC_PREFIX=@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc-lib/ @WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/bin/arsparc|
-
-# -Dasm(X)= is for beam
-s|@LIB_CFLAGS@|@CFLAGS@|
-
-s|@CFLAGS@|@GENERAL_CFLAGS@ -DCPU=SIMSPARCSOLARIS -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -DDEBUG -I@WIND_BASE@/vxworks-6.3/target/h -I@WIND_BASE@/gnu/3.4.4-vxworks-6.3/@HOST_TYPE@/lib/gcc/sparc-wrs-vxworks/3.4.4/include -I@WIND_BASE@/vxworks-6.3/target/h/wrn/coreip -fvolatile -fno-builtin |
-#s|@LIB_CFLAGS@|@GENERAL_CFLAGS@ -DCPU=SIMSPARCSOLARIS -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -DDEBUG -I@WIND_BASE@/vxworks-6.3/target/h -I@WIND_BASE@/vxworks-6.3/target/h/wrn/coreip -mstrict-align -fvolatile -fno-builtin |
diff --git a/lib/diameter/autoconf/vxworks/sed.vxworks_sparc b/lib/diameter/autoconf/vxworks/sed.vxworks_sparc
deleted file mode 100644
index 6f637d8746..0000000000
--- a/lib/diameter/autoconf/vxworks/sed.vxworks_sparc
+++ /dev/null
@@ -1,38 +0,0 @@
-# 
-# %CopyrightBegin%
-# 
-# Copyright Ericsson AB 1997-2011. All Rights Reserved.
-# 
-# The contents of this file are subject to the Erlang Public License,
-# Version 1.1, (the "License"); you may not use this file except in
-# compliance with the License. You should have received a copy of the
-# Erlang Public License along with this software. If not, it can be
-# retrieved online at http://www.erlang.org/.
-# 
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and limitations
-# under the License.
-# 
-# %CopyrightEnd%
-# 
-# Author: Patrik Winroth
-#
-# This sed program file is intended to be used when creating Makefiles for vxworks
-# from the generic Makefile.in that is found in a number of directories (see configure.vxworks)
-#
-
-# ccsparc -O2 doesn't work when compiling "rundir"/gc.c - signal 11 is generated when trying
-# therefore it is compiled with -O1 instead, which works - get a new ccsparc !
-s/\$(COMPILE\.emu) -o \$@ -c gc\.c/$(CC) @CFLAGS@ @DEFS@ -O1 $(BEAM_MODE) -I$(SYSDIR) -I$(EMUDIR) -I. $(CPPFLAGS) -c -o $@ -c gc.c/
-s/@host@/vxworks_sparc/
-s/@system_type@/vxworks_sparc/
-s/@CC@/\/home\/gandalf\/bsproj\/tools\/vw-gnu\/solaris.sparc\/bin\/ccsparc/
-s/@HCC@/gcc/
-s/@LD@/\/home\/gandalf\/bsproj\/tools\/vw-gnu\/solaris.sparc\/bin\/ldsparc/
-s/@DEBUG_FLAGS@/-g/
-s/@GCCLIB_PATH@/\/home\/gandalf\/bsproj\/tools\/vw-gnu\/solaris.sparc\/lib\/gcc-lib\/sparc-wrs-vxworks\/cygnus-2.2.3.1\/libgcc.a/
-s/@RANLIB@/ranlibsparc/
-s/@AR@/arsparc/
-s/@CFLAGS@/-I\/home\/gandalf\/bsproj\/BS.2\/UOS\/vw\/5.2\/h -DWANT_NONBLOCKING -DHAVE_MEMMOVE -DCPU=SPARC -DVXWORKS -fno-builtin -nostdinc/
-