Merge branch 'maint'

8 files changed, 71 insertions, 18 deletions

diff --git a/lib/diameter/doc/src/Makefile b/lib/diameter/doc/src/Makefile
index 99a6680f12..bd2b6b103a 100644
--- a/lib/diameter/doc/src/Makefile
+++ b/lib/diameter/doc/src/Makefile
@@ -1,4 +1,4 @@
-# 
+#
 # %CopyrightBegin%
 #
 # Copyright Ericsson AB 2010-2013. All Rights Reserved.
@@ -117,7 +117,7 @@ info:
 
 # ----------------------------------------------------
 # Release Target
-# ---------------------------------------------------- 
+# ----------------------------------------------------
 
 include $(ERL_TOP)/make/otp_release_targets.mk
 
diff --git a/lib/diameter/doc/src/diameter.xml b/lib/diameter/doc/src/diameter.xml
index 77d2381d2e..58fbd3063c 100644
--- a/lib/diameter/doc/src/diameter.xml
+++ b/lib/diameter/doc/src/diameter.xml
@@ -1,5 +1,7 @@
 <?xml version="1.0" encoding="utf-8" ?>
 <!DOCTYPE erlref SYSTEM "erlref.dtd" [
+  <!ENTITY spawn_opt
+  '<seealso marker="erts:erlang#spawn_opt-2">erlang:spawn_opt/2</seealso>'>
   <!ENTITY nodes
   '<seealso marker="erts:erlang#nodes-0">erlang:nodes/0</seealso>'>
   <!ENTITY make_ref
@@ -27,12 +29,12 @@ Version 1.1, (the "License"); you may not use this file except in
 compliance with the License. You should have received a copy of the
 Erlang Public License along with this software. If not, it can be
 retrieved online at http://www.erlang.org/.
-    
+
 Software distributed under the License is distributed on an "AS IS"
 basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 the License for the specific language governing rights and limitations
 under the License.
-    
+
 </legalnotice>
 
 <title>diameter(3)</title>
@@ -871,6 +873,17 @@ of a single Diameter node across multiple Erlang nodes.</p>
 </note>
 </item>
 
+<tag><c>{spawn_opt, [term()]}</c></tag>
+<item>
+<p>
+An options list passed to &spawn_opt; when spawning a process for an
+incoming Diameter request, unless the transport in question
+specifies another value.</p>
+
+<p>
+Defaults to the empty list.</p>
+</item>
+
 <tag><c>{use_shared_peers, boolean() | [node()] | evaluable()}</c></tag>
 <item>
 <p>
@@ -1161,6 +1174,17 @@ Defaults to 30000 for a connecting transport and 60000 for a listening
 transport.</p>
 </item>
 
+<marker id="spawn_opt"/>
+<tag><c>{spawn_opt, [term()]}</c></tag>
+<item>
+<p>
+An options list passed to &spawn_opt; when spawning a process for an
+incoming Diameter request.</p>
+
+<p>
+Defaults to the list configured on the service if not specified.</p>
+</item>
+
 <marker id="transport_config"/>
 <tag><c>{transport_config, term()}</c></tag>
 <tag><c>{transport_config, term(), &dict_Unsigned32; | infinity}</c></tag>
@@ -1626,7 +1650,7 @@ The <c>caps</c> entry identifies the capabilities sent by the local
 node and received from the peer during capabilities exchange.
 The <c>port</c> entry displays socket-level information about the
 transport connection.
-The <c>statistics</c> entry presents Diameter-level counters, 
+The <c>statistics</c> entry presents Diameter-level counters,
 an entry like <c>{{{0,280,1},recv},2}</c> saying that the client has
 received 2 DWR messages: <c>{0,280,1} = {Application_Id, Command_Code,
 R_Flag}</c>.</p>
diff --git a/lib/diameter/doc/src/diameter_compile.xml b/lib/diameter/doc/src/diameter_compile.xml
index 65228c7c7a..512070dfd0 100644
--- a/lib/diameter/doc/src/diameter_compile.xml
+++ b/lib/diameter/doc/src/diameter_compile.xml
@@ -16,9 +16,9 @@
 </copyright>
 <legalnotice>
 
-The program may be used and/or copied only with the written permission 
-from Ericsson AB, or in accordance with the terms and conditions 
-stipulated in the agreement/contract under which the program has been 
+The program may be used and/or copied only with the written permission
+from Ericsson AB, or in accordance with the terms and conditions
+stipulated in the agreement/contract under which the program has been
 supplied.
 
 </legalnotice>
diff --git a/lib/diameter/doc/src/diameter_dict.xml b/lib/diameter/doc/src/diameter_dict.xml
index becac23278..7b27046352 100644
--- a/lib/diameter/doc/src/diameter_dict.xml
+++ b/lib/diameter/doc/src/diameter_dict.xml
@@ -25,12 +25,12 @@ Version 1.1, (the "License"); you may not use this file except in
 compliance with the License. You should have received a copy of the
 Erlang Public License along with this software. If not, it can be
 retrieved online at http://www.erlang.org/.
-    
+
 Software distributed under the License is distributed on an "AS IS"
 basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 the License for the specific language governing rights and limitations
 under the License.
-    
+
 </legalnotice>
 
 <title>diameter_dict(4)</title>
diff --git a/lib/diameter/doc/src/diameter_intro.xml b/lib/diameter/doc/src/diameter_intro.xml
index 4788fcc7b8..7764cb6133 100644
--- a/lib/diameter/doc/src/diameter_intro.xml
+++ b/lib/diameter/doc/src/diameter_intro.xml
@@ -17,12 +17,12 @@ Version 1.1, (the "License"); you may not use this file except in
 compliance with the License. You should have received a copy of the
 Erlang Public License along with this software. If not, it can be
 retrieved online at http://www.erlang.org/.
-    
+
 Software distributed under the License is distributed on an "AS IS"
 basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 the License for the specific language governing rights and limitations
 under the License.
-    
+
 </legalnotice>
 
 <title>Introduction</title>
diff --git a/lib/diameter/doc/src/diameter_sctp.xml b/lib/diameter/doc/src/diameter_sctp.xml
index 5e65e8dad7..c0040f6198 100644
--- a/lib/diameter/doc/src/diameter_sctp.xml
+++ b/lib/diameter/doc/src/diameter_sctp.xml
@@ -70,10 +70,15 @@ and implements the behaviour documented in
 <v>Type = connect | accept</v>
 <v>Ref = &mod_transport_ref;</v>
 <v>Svc = #diameter_service{}</v>
-<v>Opt = {raddr, &ip_address;} | {rport, integer()} | term()</v>
+<v>Opt = OwnOpt | SctpOpt</v>
 <v>Pid = pid()</v>
 <v>LAddr = &ip_address;</v>
 <v>Reason = term()</v>
+<v>OwnOpt = {raddr, &ip_address;}
+          | {rport, integer()}
+          | {accept, Match}</v>
+<v>SctpOpt = term()</v>
+<v>Match = &ip_address; | string() | [Match]</v>
 </type>
 <desc>
 
@@ -85,9 +90,20 @@ Options <c>raddr</c> and <c>rport</c> specify the remote address
 and port for a connecting transport and not valid for a listening
 transport: the former is required while latter defaults to 3868 if
 unspecified.
-More than one <c>raddr</c> option can be specified, in which case the
+Mupltiple <c>raddr</c> options can be specified, in which case the
 connecting transport in question attempts each in sequence until
-an association is established.
+an association is established.</p>
+
+<p>
+Option <c>accept</c> specifies remote addresses for a listening
+transport and is not valid for a connecting transport.
+If specified, a remote address that does not match one of the
+specified addresses causes the association to be aborted.
+Multiple <c>accept</c> options can be specified.
+A string-valued <c>Match</c> that does not parse as an address is
+interpreted as a regular expression.</p>
+
+<p>
 Remaining options are any accepted by &gen_sctp_open1;, with the exception
 of options <c>mode</c>, <c>binary</c>, <c>list</c>, <c>active</c>
 and <c>sctp_events</c>.
diff --git a/lib/diameter/doc/src/diameter_tcp.xml b/lib/diameter/doc/src/diameter_tcp.xml
index dd6d60df07..f6bbe7dd23 100644
--- a/lib/diameter/doc/src/diameter_tcp.xml
+++ b/lib/diameter/doc/src/diameter_tcp.xml
@@ -96,10 +96,12 @@ before configuring TLS capability on diameter transports.</p>
 <v>Reason = term()</v>
 <v>OwnOpt = {raddr, &ip_address;}
           | {rport, integer()}
+          | {accept, Match}
           | {port, integer()}
           | {fragment_timer, infinity | 0..16#FFFFFFFF}</v>
 <v>SslOpt = {ssl_options, true | list()}</v>
 <v>TcpOpt = term()</v>
+<v>Match = &ip_address; | string() | [Match]</v>
 </type>
 <desc>
 
@@ -109,7 +111,18 @@ The start function required by &man_transport;.</p>
 <p>
 Options <c>raddr</c> and <c>rport</c> specify the remote address
 and port for a connecting transport and are not valid for a listening
-transport.
+transport.</p>
+
+<p>
+Option <c>accept</c> specifies remote addresses for a listening
+transport and is not valid for a connecting transport.
+If specified, a remote address that does not match one of the
+specified addresses causes the connection to be aborted.
+Multiple <c>accept</c> options can be specified.
+A string-valued <c>Match</c> that does not parse as an address is
+interpreted as a regular expression.</p>
+
+<p>
 Option <c>ssl_options</c> must be specified for a transport
 that should support TLS: a value of <c>true</c> results in a
 TLS handshake immediately upon connection establishment while
diff --git a/lib/diameter/doc/src/diameter_using.xml b/lib/diameter/doc/src/diameter_using.xml
index 02250bdef8..4427d29c3c 100644
--- a/lib/diameter/doc/src/diameter_using.xml
+++ b/lib/diameter/doc/src/diameter_using.xml
@@ -15,12 +15,12 @@ Version 1.1, (the "License"); you may not use this file except in
 compliance with the License. You should have received a copy of the
 Erlang Public License along with this software. If not, it can be
 retrieved online at http://www.erlang.org/.
-    
+
 Software distributed under the License is distributed on an "AS IS"
 basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 the License for the specific language governing rights and limitations
 under the License.
-    
+
 </legalnotice>
 
 <title>Usage</title>