Initial commit of the diameter application.

The application provides an implementation of the Diameter protocol
as defined in RFC 3588.

1 files changed, 408 insertions, 0 deletions

diff --git a/lib/diameter/test/Makefile b/lib/diameter/test/Makefile
new file mode 100644
index 0000000000..daae70b1e2
--- /dev/null
+++ b/lib/diameter/test/Makefile
@@ -0,0 +1,408 @@
+# 
+# %CopyrightBegin%
+#
+# Copyright Ericsson AB 2010. All Rights Reserved.
+#
+# The contents of this file are subject to the Erlang Public License,
+# Version 1.1, (the "License"); you may not use this file except in
+# compliance with the License. You should have received a copy of the
+# Erlang Public License along with this software. If not, it can be
+# retrieved online at http://www.erlang.org/.
+#
+# Software distributed under the License is distributed on an "AS IS"
+# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+# the License for the specific language governing rights and limitations
+# under the License.
+#
+# %CopyrightEnd%
+
+ifneq ($(ERL_TOP),)
+include $(ERL_TOP)/make/target.mk
+include $(ERL_TOP)/make/$(TARGET)/otp.mk
+else
+include $(DIAMETER_TOP)/make/target.mk
+include $(DIAMETER_TOP)/make/$(TARGET)/rules.mk
+endif
+
+# ----------------------------------------------------
+# Application version
+# ----------------------------------------------------
+include ../vsn.mk
+VSN=$(DIAMETER_VSN)
+
+
+# ----------------------------------------------------
+# Release directory specification
+# ----------------------------------------------------
+RELSYSDIR = $(RELEASE_PATH)/diameter_test
+
+ifeq ($(findstring win32,$(TARGET)),win32)
+
+MAKEFILE_SRC = Makefile.win32.src
+
+else
+
+MAKEFILE_SRC = Makefile.src
+
+endif
+
+ifeq ($(TT_DIR),)
+TT_DIR = /tmp
+endif
+
+
+# ----------------------------------------------------
+# Target Specs
+# ----------------------------------------------------
+
+include modules.mk
+
+EBIN = .
+
+HRL_FILES = diameter_test_lib.hrl
+
+ERL_FILES = $(MODULES:%=%.erl)
+
+SOURCE = $(HRL_FILES) $(ERL_FILES) 
+
+TARGET_FILES = $(MODULES:%=%.$(EMULATOR))
+
+APP_CASES   = app appup
+
+TRANSPORT_CASES = tcp
+
+ALL_CASES   = \
+	$(APP_CASES) \
+	compiler conf sync session stats reg peer \
+	$(TRANSPORT_CASES)
+
+
+EMAKEFILE  = Emakefile
+ifneq ($(ERL_TOP),)
+MAKE_EMAKE = $(wildcard $(ERL_TOP)/make/make_emakefile)
+else
+MAKE_EMAKE = $(wildcard $(DIAMETER_TOP)/make/make_emakefile)
+endif
+
+ifeq ($(MAKE_EMAKE),)
+BUILDTARGET   = $(TARGET_FILES)
+RELTEST_FILES = $(TEST_SPEC_FILE) $(COVER_SPEC_FILE) $(SOURCE)
+else
+BUILDTARGET   = emakebuild
+RELTEST_FILES = $(EMAKEFILE) $(TEST_SPEC_FILE) $(COVER_SPEC_FILE) $(SOURCE)
+endif
+
+
+# ----------------------------------------------------
+# FLAGS
+# ----------------------------------------------------
+
+include ../src/app/diameter.mk 
+
+ifeq ($(USE_DIAMETER_TEST_CODE),true)
+ERL_COMPILE_FLAGS += -DDIAMETER_TEST_CODE=mona_lisa_spelar_doom
+endif
+
+ifeq ($(USE_DIAMETER_HIPE),true)
+ERL_COMPILE_FLAGS += +native -DDIAMETER_hipe_special=true
+endif
+
+ifneq ($(ERL_TOP),)
+ERL_COMPILE_FLAGS += \
+	$(DIAMETER_ERL_COMPILE_FLAGS)       \
+	-pa $(ERL_TOP)/lib/test_server/ebin \
+	-I$(ERL_TOP)/lib/test_server/include
+else
+ERL_COMPILE_FLAGS += \
+	$(DIAMETER_ERL_COMPILE_FLAGS)       \
+	-pa $(TEST_SERVER_DIR)/ebin \
+	-I$(TEST_SERVER_DIR)/include
+endif
+
+ERL_PATH = \
+	-pa ../../$(APPLICATION)/ebin \
+	-pa ../../et/ebin
+
+ifndef SUITE
+SUITE = diameter_SUITE
+endif
+
+ESTOP = -s init stop
+
+ifeq ($(DONT_STOP),true)
+MAYBE_ESTOP =
+else
+MAYBE_ESTOP = $(ESTOP)
+endif
+
+ETVIEW = -s et_viewer
+ifeq ($(USE_ET_VIEWER),true)
+MAYBE_ETVIEW =
+else
+MAYBE_ETVIEW = $(ETVIEW)
+endif
+
+ifeq ($(MERL),)
+MERL = $(ERL)
+endif
+
+ARGS += -noshell
+
+ifeq ($(DISABLE_TC_TIMEOUT),true)
+ARGS += -diameter_test_timeout
+endif
+
+
+DIAMETER_TEST_SERVER = diameter_test_server
+
+
+# ----------------------------------------------------
+# Targets
+# ----------------------------------------------------
+
+tests debug opt: $(BUILDTARGET)
+
+targets: $(TARGET_FILES)
+
+.PHONY: emakebuild
+
+emakebuild: $(EMAKEFILE)
+
+$(EMAKEFILE): 
+	$(MAKE_EMAKE) $(ERL_COMPILE_FLAGS) -o$(EBIN) '*_SUITE_make' | grep -v Warning > $(EMAKEFILE)
+	$(MAKE_EMAKE) $(ERL_COMPILE_FLAGS) -o$(EBIN) $(MODULES) | grep -v Warning >> $(EMAKEFILE)
+
+clean:
+	rm -f $(EMAKEFILE)
+	rm -f $(TARGET_FILES) 
+	rm -f errs core *~
+
+docs:
+
+info:
+	@echo "MAKE_EMAKE        = $(MAKE_EMAKE)"
+	@echo "EMAKEFILE         = $(EMAKEFILE)"
+	@echo "BUILDTARGET       = $(BUILDTARGET)"
+	@echo ""
+	@echo "ERL_COMPILE_FLAGS = $(ERL_COMPILE_FLAGS)"
+	@echo "ERL  = $(ERL)"
+	@echo "ERLC = $(ERLC)"
+	@echo "MERL = $(MERL)"
+	@echo ""
+	@echo "ARGS = $(ARGS)"
+	@echo ""
+	@echo "HRL_FILES    = $(HRL_FILES)"
+	@echo "ERL_FILES    = $(ERL_FILES)"
+	@echo "TARGET_FILES = $(TARGET_FILES)"
+	@echo ""
+
+help:
+	@echo ""
+	@echo "This Makefile controls the test of the $(APPLICATION) application. "
+	@echo ""
+	@echo "There are two separate ways to perform the test of $(APPLICATION)."
+	@echo ""
+	@echo "  a) Run the official OTP test-server (which we do not describe here)"
+	@echo ""
+	@echo "  b) Run the test-server provided with this application. "
+	@echo "     There are a number of targets to run the entire or parts"
+	@echo "     of this applications ($(APPLICATION)) test-suite"
+	@echo ""
+	@echo "Targets:"
+	@echo ""
+	@echo "    help"
+	@echo "      Print this info"
+	@echo ""
+	@echo "    info"
+	@echo "      Prints various environment variables. "
+	@echo "      May be useful when debugging the Makefile. "
+	@echo ""
+	@echo "    tests | debug | opt "
+	@echo "      Compile all test-code. "
+	@echo ""
+	@echo "    clean "
+	@echo "      Remove all targets. "
+	@echo ""
+	@echo "    test"
+	@echo "      Run the entire $(APPLICATION) test-suite. "
+	@echo ""
+	@echo "    app"
+	@echo "      Run the $(APPLICATION) application sub-test-suite. "
+	@echo ""
+	@echo "    appup"
+	@echo "      Run the $(APPLICATION) application upgrade (appup) sub-test-suite. "
+	@echo ""
+	@echo "    compiler"
+	@echo "      Run the $(APPLICATION) compiler sub-test-suite(s). "
+	@echo ""
+	@echo "    conf"
+	@echo "      Run the $(APPLICATION) config sub-test-suite. "
+	@echo "      Checks various aspects of the $(APPLICATION) configuration. "
+	@echo ""
+	@echo "    sync"
+	@echo "      Run the $(APPLICATION) sync sub-test-suite. "
+	@echo ""
+	@echo "    session"
+	@echo "      Run the $(APPLICATION) session sub-test-suite. "
+	@echo ""
+	@echo "    stats"
+	@echo "      Run the $(APPLICATION) stats sub-test-suite. "
+	@echo ""
+	@echo "    reg"
+	@echo "      Run the $(APPLICATION) reg sub-test-suite. "
+	@echo ""
+	@echo "    peer"
+	@echo "      Run the $(APPLICATION) peer sub-test-suite"
+	@echo ""
+	@echo "    ptab"
+	@echo "      Run the $(APPLICATION) persistent-table sub-test-suite"
+	@echo ""
+	@echo "    tcp"
+	@echo "      Run the $(APPLICATION) tcp sub-test-suite"
+	@echo ""
+	@echo ""
+
+
+# ----------------------------------------------------
+# Special Targets
+# ----------------------------------------------------
+
+all: make
+	@echo "make sure epmd is new"
+	@epmd -kill > /dev/null
+	@echo "Running all sub-suites separatelly"
+	@for i in $(ALL_CASES); do \
+            echo "SUITE: $$i"; \
+            clearmake -V $$i > $$i.log; \
+        done
+
+aall: make
+	@echo "make sure epmd is new"
+	@epmd -kill > /dev/null
+	@echo "Running all app sub-suites separatelly"
+	@for i in $(APP_CASES); do \
+            echo "SUITE: $$i"; \
+            clearmake -V $$i > $$i.log; \
+        done
+	echo "done"
+
+tall: make
+	@echo "make sure epmd is new"
+	@epmd -kill > /dev/null
+	@echo "Running all transport sub-suites separatelly"
+	@for i in $(TRANSPORT_CASES); do \
+            echo "SUITE: $$i"; \
+            clearmake -V $$i > $$i.log; \
+        done
+
+make: targets
+
+test: make
+	$(MERL) $(ARGS) -sname diameter_test $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t $(SUITE) \
+            $(MAYBE_ESTOP)
+
+utest: make
+	$(MERL) $(ARGS) -sname diameter_utest $(ERL_PATH) \
+            $(MAYBE_ETVIEW) \
+            -s $(DIAMETER_TEST_SERVER) t $(SUITE) \
+            $(ESTOP)
+
+# ftest: make
+# 	$(MERL) $(ARGS) -sname diameter_ftest $(ERL_PATH) \
+#             -s diameter_filter \
+#             -s $(DIAMETER_TEST_SERVER) t $(SUITE) \
+#             $(ESTOP)
+# 
+
+##########################
+
+# tickets: make
+# 	$(MERL) $(ARGS) -sname diameter_tickets $(ERL_PATH) \
+#             -s $(DIAMETER_TEST_SERVER) tickets $(SUITE) \
+#             $(ESTOP)
+# 
+
+app: make
+	$(MERL) $(ARGS) -sname diameter_app $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_app_test \
+            $(ESTOP)
+
+appup: make
+	$(MERL) $(ARGS) -sname diameter_appup $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_appup_test \
+            $(ESTOP)
+
+compiler: make
+	$(MERL) $(ARGS) -sname diameter_compiler $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_compiler_test \
+            $(ESTOP)
+
+conf: make
+	$(MERL) $(ARGS) -sname diameter_config $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_config_test \
+            $(ESTOP)
+
+sync: make
+	$(MERL) $(ARGS) -sname diameter_sync $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_sync_test \
+            $(ESTOP)
+
+session: make
+	$(MERL) $(ARGS) -sname diameter_session $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_session_test \
+            $(ESTOP)
+
+stats: make
+	$(MERL) $(ARGS) -sname diameter_stats $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_stats_test \
+            $(ESTOP)
+
+reg: make
+	$(MERL) $(ARGS) -sname diameter_reg $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_reg_test \
+            $(ESTOP)
+
+peer: make
+	$(MERL) $(ARGS) -sname diameter_peer $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_peer_test \
+            $(ESTOP)
+
+ptab: make
+	$(MERL) $(ARGS) -sname diameter_persistent_table $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_persistent_table_test \
+            $(ESTOP)
+
+tcp: make
+	$(MERL) $(ARGS) -sname diameter_tcp $(ERL_PATH) \
+            -s $(DIAMETER_TEST_SERVER) t diameter_tcp_test \
+            $(ESTOP)
+
+
+node:
+	$(MERL) -sname diameter $(ERL_PATH)
+
+
+# ----------------------------------------------------
+# Release Targets
+# ---------------------------------------------------- 
+
+ifneq ($(ERL_TOP),)
+include $(ERL_TOP)/make/otp_release_targets.mk
+else
+include $(DIAMETER_TOP)/make/release_targets.mk
+endif
+
+release_spec: 
+
+release_docs_spec:
+
+release_tests_spec: tests
+	$(INSTALL_DIR)  $(RELSYSDIR)
+	$(INSTALL_DATA) $(RELTEST_FILES) $(RELSYSDIR)
+#	$(INSTALL_DATA) $(TEST_SPEC_FILE) $(COVER_SPEC_FILE) \
+#                        $(HRL_FILES) $(ERL_FILES) \
+#                        $(RELSYSDIR)
+#
+	chmod -f -R u+w $(RELSYSDIR)
+