The R13B03 release.OTP_R13B03

1 files changed, 198 insertions, 0 deletions

diff --git a/lib/megaco/Makefile b/lib/megaco/Makefile
new file mode 100644
index 0000000000..d4698eb558
--- /dev/null
+++ b/lib/megaco/Makefile
@@ -0,0 +1,198 @@
+# 
+# %CopyrightBegin%
+# 
+# Copyright Ericsson AB 1999-2009. All Rights Reserved.
+# 
+# The contents of this file are subject to the Erlang Public License,
+# Version 1.1, (the "License"); you may not use this file except in
+# compliance with the License. You should have received a copy of the
+# Erlang Public License along with this software. If not, it can be
+# retrieved online at http://www.erlang.org/.
+# 
+# Software distributed under the License is distributed on an "AS IS"
+# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+# the License for the specific language governing rights and limitations
+# under the License.
+# 
+# %CopyrightEnd%
+
+#
+# --------------------------------------------------------------------
+# If downloading this app separately (not as part of 
+# an OTP source release), then there is two ways to
+# build and install this app.
+# 1) Replace the megaco source dir in an existing
+#    OTP source tree. Then re-configure, build and 
+#    install OTP.
+#    Note that the directory name has to be renamed
+#    from megaco-<version> to megaco.
+# 2) Unpack outside an OTP-source tree. 
+#    a) Configure app (make ERL_TOP=</path/to/top/OTP-source/dir> conf)
+#    b) make ERL_TOP=</path/to/top/OTP-source/dir>
+#    c) make ERL_TOP=</path/to/top/OTP-source/dir> \
+#            OTP_INSTALL_DIR=</path/to/top/OTP-install/dir> app_install
+#       (e.g. if otp is installed in /usr/local/otp-r9b,
+#        then OTP_INSTALL_DIR is /usr/local/otp-r9b and
+#        the app will be installed in dir 
+#        /usr/local/otp-r9b/lib/erlang/lib/megaco-<version>)
+# -----------------------------------------------------------------------
+#
+
+include $(ERL_TOP)/make/target.mk
+include $(ERL_TOP)/make/$(TARGET)/otp.mk
+
+# ----------------------------------------------------
+# Application version
+# ----------------------------------------------------
+include vsn.mk
+VSN=$(MEGACO_VSN)
+
+DIR_NAME = megaco_src-$(VSN)$(PRE_VSN)
+
+ifndef APP_RELEASE_DIR
+  ifndef TESTROOT
+    APP_RELEASE_DIR = /tmp
+  else
+    APP_RELEASE_DIR = $(TESTROOT)
+  endif
+endif
+
+ifndef APP_TAR_FILE
+  APP_TAR_FILE = $(APP_RELEASE_DIR)/$(DIR_NAME).tgz
+endif
+
+APP_DIR = $(APP_RELEASE_DIR)/$(DIR_NAME)
+
+ifdef OTP_INSTALL_DIR
+  APP_INSTALL_DIR = $(OTP_INSTALL_DIR)/lib/erlang
+else
+  # If installing into an OTP structure created
+  # by installing an source OTP build, the '/tmp'
+  # shall be replaced with the value of ERL_TOP
+  APP_INSTALL_DIR = /tmp/lib/erlang
+endif
+
+# ----------------------------------------------------
+# Common Macros
+# ----------------------------------------------------
+
+include subdirs.mk
+
+SUB_DIRECTORIES = $(SUB_DIRS) doc/src
+
+SPECIAL_TARGETS = 
+
+ifeq ($(FLEX_SCANNER_LINENO),disable)
+  FLEX_SCANNER_LINENO_ENABLER = --disable-megaco-flex-scanner-lineno
+else
+  FLEX_SCANNER_LINENO_ENABLER = --enable-megaco-flex-scanner-lineno
+endif
+
+ifeq ($(FLEX_SCANNER_REENTRANT),disable)
+  FLEX_SCANNER_REENTRANT_ENABLER = --disable-megaco-reentrant-flex-scanner
+else
+  FLEX_SCANNER_REENTRANT_ENABLER = --enable-megaco-reentrant-flex-scanner
+endif
+
+CONFIGURE_OPTS = $(FLEX_SCANNER_LINENO_ENABLER) $(FLEX_SCANNER_REENTRANT_ENABLER)
+
+
+
+# ----------------------------------------------------
+# Default Subdir Targets
+# ----------------------------------------------------
+include $(ERL_TOP)/make/otp_subdir.mk
+
+reconf:
+	(cd $(ERL_TOP) && \
+		./otp_build autoconf && \
+		./otp_build configure && \
+		cd $(ERL_TOP)/../libraries/megaco)
+
+conf: do_configure
+
+dconf: 
+	$(MAKE) conf FLEX_SCANNER_REENTRANT=disable
+
+econf: 
+	$(MAKE) conf FLEX_SCANNER_REENTRANT=enable
+
+do_configure: configure 
+	./configure $(CONFIGURE_OPTS)
+
+configure: configure.in
+	autoconf
+
+setup:
+	(cd src && $(MAKE) $@)
+
+info:
+	@echo "APP_RELEASE_DIR: $(APP_RELEASE_DIR)"
+	@echo "APP_DIR:         $(APP_DIR)"
+	@echo "APP_TAR_FILE:    $(APP_TAR_FILE)"
+	@echo "OTP_INSTALL_DIR: $(OTP_INSTALL_DIR)"
+	@echo "APP_INSTALL_DIR: $(APP_INSTALL_DIR)"
+
+version:
+	@echo "$(VSN)"
+
+
+# ----------------------------------------------------
+# Application install (of a app built from source) targets
+# ----------------------------------------------------
+app_install:
+	$(MAKE) TESTROOT=$(APP_INSTALL_DIR) release 
+
+
+# ----------------------------------------------------
+# Application (source) release targets
+# ----------------------------------------------------
+app_release: app_doc tar
+
+app_doc:
+	cd doc/src; $(MAKE) html man
+
+app_dir: $(APP_DIR)
+
+tar_exclude: TAR.exclude2
+
+TAR.exclude2: Makefile TAR.exclude
+	cat TAR.exclude > TAR.exclude2; \
+        echo "megaco/TAR.exclude2" >> TAR.exclude2; \
+        echo "megaco/priv/lib/$(TARGET)" >> TAR.exclude2; \
+        echo "megaco/src/flex/$(TARGET)" >> TAR.exclude2; \
+	(cd ..; find megaco -name 'prebuild.skip' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name 'findmerge.*' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name '*.contrib*' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name '*.keep*' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name '*.mkelem*' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name '*~' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name 'erl_crash.dump' >> megaco/TAR.exclude2)
+	(cd ..; find megaco/test -name '*.beam' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name '*.log' >> megaco/TAR.exclude2)
+	(cd ..; find megaco/examples/meas -name '*.xls' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name 'core' >> megaco/TAR.exclude2)
+	(cd ..; find megaco -name '.cmake.state' >> megaco/TAR.exclude2)
+
+$(APP_DIR): tar_exclude
+	mkdir -p $(APP_DIR); \
+        (cd ..; tar cfX - megaco/TAR.exclude2 megaco) | \
+        (cd $(APP_DIR); tar xf -); \
+        mv $(APP_DIR)/megaco/* $(APP_DIR)/; \
+	mkdir $(APP_DIR)/autoconf; \
+        cp autoconf/config.guess $(APP_DIR)/autoconf/; \
+        cp autoconf/config.sub $(APP_DIR)/autoconf/; \
+        cp autoconf/install-sh $(APP_DIR)/autoconf/; \
+        rmdir $(APP_DIR)/megaco
+
+tar: $(APP_TAR_FILE)
+
+$(APP_TAR_FILE): $(APP_DIR)
+	(cd $(APP_RELEASE_DIR); gtar zcf $(APP_TAR_FILE) $(DIR_NAME))
+
+dialyzer: 
+	(cd ./ebin; \
+         dialyzer --build_plt \
+                  --output_plt ../priv/megaco.plt \
+                  -r ../../megaco/ebin \
+                  --verbose)