diff options
author | Sverker Eriksson <[email protected]> | 2015-09-02 15:43:57 +0200 |
---|---|---|
committer | Sverker Eriksson <[email protected]> | 2015-09-02 15:43:57 +0200 |
commit | 6e75676652d87d78041a9db11b088b33ad7ef672 (patch) | |
tree | bdfab5e00f4059950c927a5ca748efb9965c782c /lib/mnesia/doc/src/Mnesia_chap7.xmlsrc | |
parent | 0c52e3c18da16dbb896871865b71093b8c5617c4 (diff) | |
parent | 3af9e6ef9bd6a9e9faf0e5bf683f4f1c5c0c0ca9 (diff) | |
download | otp-6e75676652d87d78041a9db11b088b33ad7ef672.tar.gz otp-6e75676652d87d78041a9db11b088b33ad7ef672.tar.bz2 otp-6e75676652d87d78041a9db11b088b33ad7ef672.zip |
Merge branch 'maint' into sverk/trace-process_dump-matchstate
Conflicts:
erts/emulator/beam/erl_printf_term.c
erts/emulator/beam/erl_term.c
erts/emulator/beam/utils.c
Diffstat (limited to 'lib/mnesia/doc/src/Mnesia_chap7.xmlsrc')
-rw-r--r-- | lib/mnesia/doc/src/Mnesia_chap7.xmlsrc | 1311 |
1 files changed, 669 insertions, 642 deletions
diff --git a/lib/mnesia/doc/src/Mnesia_chap7.xmlsrc b/lib/mnesia/doc/src/Mnesia_chap7.xmlsrc index 4458cd3919..fa8fa6bbb0 100644 --- a/lib/mnesia/doc/src/Mnesia_chap7.xmlsrc +++ b/lib/mnesia/doc/src/Mnesia_chap7.xmlsrc @@ -8,16 +8,17 @@ <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> - The contents of this file are subject to the Erlang Public License, - Version 1.1, (the "License"); you may not use this file except in - compliance with the License. You should have received a copy of the - Erlang Public License along with this software. If not, it can be - retrieved online at http://www.erlang.org/. - - Software distributed under the License is distributed on an "AS IS" - basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - the License for the specific language governing rights and limitations - under the License. + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. </legalnotice> @@ -32,47 +33,61 @@ <file>Mnesia_chap7.xml</file> </header> + <p>The following topics are included:</p> + <list type="bulleted"> + <item>Database configuration data</item> + <item>Core dumps</item> + <item>Dumping tables</item> + <item>Checkpoints</item> + <item>Startup files, log file, and data files</item> + <item>Loading tables at startup</item> + <item>Recovery from communication failure</item> + <item>Recovery of transactions</item> + <item>Backup, restore, fallback, and disaster recovery</item> + </list> + <section> <title>Database Configuration Data</title> <p>The following two functions can be used to retrieve system - information. They are described in detail in the reference manual. - </p> + information. For details, see the Reference Manual.</p> <list type="bulleted"> - <item><c>mnesia:table_info(Tab, Key) -></c><c>Info | exit({aborted, Reason})</c>. - Returns information about one table. Such as the - current size of the table, on which nodes it resides etc. + <item><seealso marker="mnesia#table_info/2">mnesia:table_info(Tab, Key) + -> Info | exit({aborted,Reason})</seealso> + returns information about one table, for example, + the current size of the table and on which nodes it resides. </item> - <item><c>mnesia:system_info(Key) -> </c><c>Info | exit({aborted, Reason})</c>. - Returns information about the Mnesia system. For example, transaction - statistics, db_nodes, configuration parameters etc. + <item><seealso marker="mnesia#system_info/1">mnesia:system_info(Key) + -> Info | exit({aborted, Reason})</seealso> + returns information about the <c>Mnesia</c> system, + for example, transaction statistics, <c>db_nodes</c>, and + configuration parameters. </item> </list> </section> <section> <title>Core Dumps</title> - <p>If Mnesia malfunctions, system information is dumped to a file - named <c>MnesiaCore.Node.When</c>. The type of system + <p>If <c>Mnesia</c> malfunctions, system information is dumped to + file <c>MnesiaCore.Node.When</c>. The type of system information contained in this file can also be generated with - the function <c>mnesia_lib:coredump()</c>. If a Mnesia system - behaves strangely, it is recommended that a Mnesia core dump - file be included in the bug report.</p> + the function <c>mnesia_lib:coredump()</c>. If a <c>Mnesia</c> + system behaves strangely, it is recommended that a <c>Mnesia</c> + core dump file is included in the bug report.</p> </section> <section> <title>Dumping Tables</title> <p>Tables of type <c>ram_copies</c> are by definition stored in - memory only. It is possible, however, to dump these tables to - disc, either at regular intervals, or before the system is - shutdown. The function <c>mnesia:dump_tables(TabList)</c> dumps - all replicas of a set of RAM tables to disc. The tables can be - accessed while being dumped to disc. To dump the tables to - disc all replicas must have the storage type <c>ram_copies</c>. - </p> - <p>The table content is placed in a .DCD file on the - disc. When the Mnesia system is started, the RAM table will - initially be loaded with data from its .DCD file. - </p> + memory only. However, these tables can be dumped to + disc, either at regular intervals or before the system is + shut down. The function + <seealso marker="mnesia#dump_tables/1">mnesia:dump_tables(TabList)</seealso> + dumps all replicas of a set of RAM tables to disc. The tables can be + accessed while being dumped to disc. To dump the tables to disc, + all replicas must have the storage type <c>ram_copies</c>.</p> + <p>The table content is placed in a <c>.DCD</c> file on the + disc. When the <c>Mnesia</c> system is started, the RAM table + is initially loaded with data from its <c>.DCD</c> file.</p> </section> <section> @@ -80,137 +95,128 @@ <title>Checkpoints</title> <p>A checkpoint is a transaction consistent state that spans over one or more tables. When a checkpoint is activated, the system - will remember the current content of the set of tables. The + remembers the current content of the set of tables. The checkpoint retains a transaction consistent state of the tables, allowing the tables to be read and updated while the checkpoint - is active. A checkpoint is typically used to + is active. A checkpoint is typically used to back up tables to external media, but they are also used - internally in Mnesia for other purposes. Each checkpoint is - independent and a table may be involved in several checkpoints - simultaneously. - </p> - <p>Each table retains its old contents in a checkpoint retainer - and for performance critical applications, it may be important + internally in <c>Mnesia</c> for other purposes. Each checkpoint + is independent and a table can be involved in several checkpoints + simultaneously.</p> + <p>Each table retains its old contents in a checkpoint retainer. + For performance critical applications, it can be important to realize the processing overhead associated with checkpoints. - In a worst case scenario, the checkpoint retainer will consume - even more memory than the table itself. Each update will also be + In a worst case scenario, the checkpoint retainer consumes + more memory than the table itself. Also, each update becomes slightly slower on those nodes where checkpoint - retainers are attached to the tables. - </p> - <p>For each table it is possible to choose if there should be one + retainers are attached to the tables.</p> + <p>For each table, it is possible to choose if there is to be one checkpoint retainer attached to all replicas of the table, or if it is enough to have only one checkpoint retainer attached to a single replica. With a single checkpoint retainer per table, the - checkpoint will consume less memory, but it will be vulnerable - to node crashes. With several redundant checkpoint retainers the - checkpoint will survive as long as there is at least one active - checkpoint retainer attached to each table. - </p> - <p>Checkpoints may be explicitly deactivated with the function - <c>mnesia:deactivate_checkpoint(Name)</c>, where <c>Name</c> is + checkpoint consumes less memory, but it is vulnerable + to node crashes. With several redundant checkpoint retainers, the + checkpoint survives as long as there is at least one active + checkpoint retainer attached to each table.</p> + <p>Checkpoints can be explicitly deactivated with the function + <seealso marker="mnesia#deactivate_checkpoint/1">mnesia:deactivate_checkpoint(Name)</seealso>, + where <c>Name</c> is the name of an active checkpoint. This function returns - <c>ok</c> if successful, or <c>{error, Reason}</c> in the case - of an error. All tables in a checkpoint must be attached to at + <c>ok</c> if successful or <c>{error, Reason}</c> if there is + an error. All tables in a checkpoint must be attached to at least one checkpoint retainer. The checkpoint is automatically - de-activated by Mnesia, when any table lacks a checkpoint - retainer. This may happen when a node goes down or when a - replica is deleted. Use the <c>min</c> and - <c>max</c> arguments described below, to control the degree of - checkpoint retainer redundancy. - </p> - <p>Checkpoints are activated with the function <marker id="mnesia:chkpt(Args)"></marker> -<c>mnesia:activate_checkpoint(Args)</c>, - where <c>Args</c> is a list of the following tuples: - </p> + deactivated by <c>Mnesia</c>, when any table lacks a checkpoint + retainer. This can occur when a node goes down or when a + replica is deleted. Use arguments <c>min</c> and + <c>max</c> (described in the following list) to control the + degree of checkpoint retainer redundancy.</p> + <marker id="mnesia:chkpt(Args)"></marker> + <p>Checkpoints are activated with the function + <seealso marker="mnesia#activate_checkpoint/1">mnesia:activate_checkpoint(Args)</seealso>, + where <c>Args</c> is a list of the following tuples:</p> <list type="bulleted"> - <item><c>{name,Name}</c>. <c>Name</c> specifies a temporary name - of the checkpoint. The name may be re-used when the checkpoint - has been de-activated. If no name is specified, a name is + <item><c>{name,Name}</c>, where <c>Name</c> specifies a temporary + name of the checkpoint. The name can be reused when the checkpoint + has been deactivated. If no name is specified, a name is generated automatically. </item> - <item><c>{max,MaxTabs}</c>. <c>MaxTabs</c> is a list of tables - which will be included in the checkpoint. The default is - <c>[]</c> (an empty list). For these tables, the redundancy - will be maximized. The old contents of the table will be + <item><c>{max,MaxTabs}</c>, where <c>MaxTabs</c> is a list of + tables that are to be included in the checkpoint. Default is + <c>[]</c> (empty list). For these tables, the redundancy + is maximized. The old content of the table is retained in the checkpoint retainer when the main table is - updated by the applications. The checkpoint becomes more fault + updated by the applications. The checkpoint is more fault tolerant if the tables have several replicas. When new - replicas are added by means of the schema manipulation - function <c>mnesia:add_table_copy/3</c>, it will also - attach a local checkpoint retainer. + replicas are added by the schema manipulation function + <seealso marker="mnesia#add_table_copy/3">mnesia:add_table_copy/3</seealso> + it also attaches a local checkpoint retainer. </item> - <item><c>{min,MinTabs}</c>. <c>MinTabs</c> is a list of tables - that should be included in the checkpoint. The default is - <c>[]</c>. For these tables, the redundancy will be minimized, - and there will be a single checkpoint retainer per table, + <item><c>{min,MinTabs}</c>, where <c>MinTabs</c> is a list of + tables that are to be included in the checkpoint. Default + is <c>[]</c>. For these tables, the redundancy is minimized, + and there is to be single checkpoint retainer per table, preferably at the local node. </item> - <item><c>{allow_remote,Bool}</c>. <c>false</c> means that all - checkpoint retainers must be local. If a table does not reside - locally, the checkpoint cannot be activated. <c>true</c> - allows checkpoint retainers to be allocated on any node. The - defaults is <c>true</c>. + <item><c>{allow_remote,Bool}</c>, where <c>false</c> means that + all checkpoint retainers must be local. If a table does not + reside locally, the checkpoint cannot be activated. <c>true</c> + allows checkpoint retainers to be allocated on any node. + Default is <c>true</c>. </item> <item><c>{ram_overrides_dump,Bool}</c>. This argument only applies to tables of type <c>ram_copies</c>. <c>Bool</c> - specifies if the table state in RAM should override the table + specifies if the table state in RAM is to override the table state on disc. <c>true</c> means that the latest committed records in RAM are included in the checkpoint retainer. These are the records that the application accesses. <c>false</c> - means that the records on the disc .DAT file are - included in the checkpoint retainer. These are the records - that will be loaded on start-up. Default is <c>false</c>.</item> + means that the records on the disc <c>.DAT</c> file are + included in the checkpoint retainer. These records are + loaded on startup. Default is <c>false</c>.</item> </list> - <p>The <c>mnesia:activate_checkpoint(Args)</c> returns one of the - following values: - </p> + <p>The function + <seealso marker="mnesia#activate_checkpoint/1">mnesia:activate_checkpoint(Args)</seealso> + returns one of the following values:</p> <list type="bulleted"> <item><c>{ok, Name, Nodes}</c></item> - <item><c>{error, Reason}</c>.</item> + <item><c>{error, Reason}</c></item> </list> - <p><c>Name</c> is the name of the checkpoint, and <c>Nodes</c> are - the nodes where the checkpoint is known. - </p> + <p><c>Name</c> is the checkpoint name. <c>Nodes</c> are + the nodes where the checkpoint is known.</p> <p>A list of active checkpoints can be obtained with the following - functions: - </p> + functions:</p> <list type="bulleted"> - <item><c>mnesia:system_info(checkpoints)</c>. This function + <item><seealso marker="mnesia#system_info/1">mnesia:system_info(checkpoints)</seealso> returns all active checkpoints on the current node.</item> - <item><c>mnesia:table_info(Tab,checkpoints)</c>. This function + <item><seealso marker="mnesia#table_info/2">mnesia:table_info(Tab, checkpoints)</seealso> returns active checkpoints on a specific table.</item> </list> </section> <section> - <title>Files</title> - <p>This section describes the internal files which are created and maintained by the Mnesia system, - in particular, the workings of the Mnesia log is described. - </p> + <title>Startup Files, Log File, and Data Files</title> + <p>This section describes the internal files that are created + and maintained by the <c>Mnesia</c> system. In particular, + the workings of the <c>Mnesia</c> log are described.</p> <section> - <title>Start-Up Files</title> - </section> - <p>In Chapter 3 we detailed the following pre-requisites for - starting Mnesia (refer Chapter 3: <seealso marker="Mnesia_chap3#start_mnesia">Starting Mnesia</seealso>: - </p> + <title>Startup Files</title> + <p><seealso marker="Mnesia_chap3#start_mnesia">Start Mnesia</seealso> + states the following prerequisites + for starting <c>Mnesia</c>:</p> <list type="bulleted"> - <item>We must start an Erlang session and specify a Mnesia - directory for our database. + <item>An Erlang session must be started and a <c>Mnesia</c> + directory must be specified for the database. </item> - <item>We must initiate a database schema, using the function - <c>mnesia:create_schema/1</c>. + <item>A database schema must be initiated, using the function + <seealso marker="mnesia#create_schema/1">mnesia:create_schema/1</seealso>. </item> </list> - <p>The following example shows how these tasks are performed: - </p> - <list type="ordered"> - <item> - <pre> -% <input>erl -sname klacke -mnesia dir '"/ldisc/scratch/klacke"'</input> </pre> - </item> - <item> - <pre> + <p>The following example shows how these tasks are performed:</p> + <p><em>Step 1:</em> Start an Erlang session and specify a + <c>Mnesia</c> directory for the database:</p> + <pre> +% <input>erl -sname klacke -mnesia dir '"/ldisc/scratch/klacke"'</input></pre> + <pre> Erlang (BEAM) emulator version 4.9 Eshell V4.9 (abort with ^G) @@ -218,679 +224,700 @@ Eshell V4.9 (abort with ^G) ok (klacke@gin)2> <input>^Z</input> -Suspended </pre> - <p>We can inspect the Mnesia directory to see what files have been created. Enter the following command: - </p> - <pre> +Suspended</pre> + <p><em>Step 2:</em> You can inspect the <c>Mnesia</c> directory + to see what files have been created:</p> + <pre> % <input>ls -l /ldisc/scratch/klacke</input> --rw-rw-r-- 1 klacke staff 247 Aug 12 15:06 FALLBACK.BUP </pre> - <p>The response shows that the file FALLBACK.BUP has been created. This is called a backup file, and it contains an initial schema. If we had specified more than one node in the <c>mnesia:create_schema/1</c> function, identical backup files would have been created on all nodes. - </p> - </item> - <item> - <p>Continue by starting Mnesia:</p> - <pre> +-rw-rw-r-- 1 klacke staff 247 Aug 12 15:06 FALLBACK.BUP</pre> + <p>The response shows that the file <c>FALLBACK.BUP</c> has + been created. This is called a backup file, and it contains + an initial schema. If more than one node in the function + <seealso marker="mnesia#create_schema/1">mnesia:create_schema/1</seealso> + had been specified, identical + backup files would have been created on all nodes.</p> + <p><em>Step 3:</em> Start <c>Mnesia</c>:</p> + <pre> (klacke@gin)3><input>mnesia:start( ).</input> -ok </pre> - <p>We can now see the following listing in the Mnesia directory: - </p> - <pre> +ok</pre> + <p><em>Step 4:</em> You can see the following listing in + the <c>Mnesia</c> directory:</p> + <pre> -rw-rw-r-- 1 klacke staff 86 May 26 19:03 LATEST.LOG --rw-rw-r-- 1 klacke staff 34507 May 26 19:03 schema.DAT </pre> - <p>The schema in the backup file FALLBACK.BUP has been used to generate the file <c>schema.DAT.</c> Since we have no other disc resident tables than the schema, no other data files were created. The file FALLBACK.BUP was removed after the successful "restoration". We also see a number of files that are for internal use by Mnesia. - </p> - </item> - <item> - <p>Enter the following command to create a table:</p> - <pre> +-rw-rw-r-- 1 klacke staff 34507 May 26 19:03 schema.DAT</pre> + <p>The schema in the backup file <c>FALLBACK.BUP</c> has been + used to generate the file <c>schema.DAT</c>. Since there are + no other disc resident tables than the schema, no other data + files were created. The file <c>FALLBACK.BUP</c> was removed + after the successful "restoration". You also see some files + that are for internal use by <c>Mnesia</c>.</p> + <p><em>Step 5:</em> Create a table:</p> + <pre> (klacke@gin)4> <input>mnesia:create_table(foo,[{disc_copies, [node()]}]).</input> -{atomic,ok} </pre> - <p>We can now see the following listing in the Mnesia directory: - </p> - <pre> +{atomic,ok}</pre> + <p><em>Step 6:</em> You can see the following listing in + the <c>Mnesia</c> directory:</p> + <pre> % <input>ls -l /ldisc/scratch/klacke</input> -rw-rw-r-- 1 klacke staff 86 May 26 19:07 LATEST.LOG -rw-rw-r-- 1 klacke staff 94 May 26 19:07 foo.DCD --rw-rw-r-- 1 klacke staff 6679 May 26 19:07 schema.DAT </pre> - <p>Where a file <c>foo.DCD</c> has been created. This file will eventually store - all data that is written into the <c>foo</c> table.</p> - </item> - </list> +-rw-rw-r-- 1 klacke staff 6679 May 26 19:07 schema.DAT</pre> + <p>The file <c>foo.DCD</c> has been created. This file will + eventually store all data that is written into the + <c>foo</c> table.</p> + </section> <section> - <title>The Log File</title> - <p>When starting Mnesia, a .LOG file called <c>LATEST.LOG</c> - was created and placed in the database directory. This file is - used by Mnesia to log disc based transactions. This includes all - transactions that write at least one record in a table which is - of storage type <c>disc_copies</c>, or - <c>disc_only_copies</c>. It also includes all operations which - manipulate the schema itself, such as creating new tables. The - format of the log can vary with different implementations of - Mnesia. The Mnesia log is currently implemented with the - standard library module <c>disc_log</c>. - </p> - <p>The log file will grow continuously and must be dumped at - regular intervals. "Dumping the log file" means that Mnesia will - perform all the operations listed in the log and place the - records in the corresponding .DAT, .DCD and .DCL data files. For - example, if the operation "write record <c>{foo, 4, elvis, 6}</c>" - is listed in the log, Mnesia inserts the operation into the - file <c>foo.DCL</c>, later when Mnesia thinks the .DCL has become to large - the data is moved to the .DCD file. - The dumping operation can be time consuming - if the log is very large. However, it is important to realize - that the Mnesia system continues to operate during log dumps. - </p> - <p>By default Mnesia either dumps the log whenever 100 records have - been written in the log or when 3 minutes have passed. + <title>Log File</title> + <p>When starting <c>Mnesia</c>, a <c>.LOG</c> file called + <c>LATEST.LOG</c> is created + and placed in the database directory. This file is used by + <c>Mnesia</c> to log disc-based transactions. This includes all + transactions that write at least one record in a table that is + of storage type <c>disc_copies</c> or <c>disc_only_copies</c>. + The file also includes all operations that + manipulate the schema itself, such as creating new tables. + The log format can vary with different implementations of + <c>Mnesia</c>. The <c>Mnesia</c> log is currently implemented + in the standard library module + <seealso marker="kernel:disk_log">disk_log</seealso> in + <c>Kernel</c>.</p> + <p>The log file grows continuously and must be dumped at + regular intervals. "Dumping the log file" means that <c>Mnesia</c> + performs all the operations listed in the log and place the + records in the corresponding <c>.DAT</c>, <c>.DCD</c>, and + <c>.DCL</c> data files. For example, if the operation "write + record <c>{foo, 4, elvis, 6}</c>" is listed in the log, + <c>Mnesia</c> inserts the operation into the file + <c>foo.DCL</c>. Later, when <c>Mnesia</c> thinks that the + <c>.DCL</c> file is too large, the data is moved to the + <c>.DCD</c> file. The dumping operation can be time consuming + if the log is large. Notice that the <c>Mnesia</c> system + continues to operate during log dumps.</p> + <p>By default <c>Mnesia</c> either dumps the log whenever + 100 records have + been written in the log or when three minutes have passed. This is controlled by the two application parameters <c>-mnesia dump_log_write_threshold WriteOperations</c> and - <c>-mnesia dump_log_time_threshold MilliSecs</c>. - </p> + <c>-mnesia dump_log_time_threshold MilliSecs</c>.</p> <p>Before the log is dumped, the file <c>LATEST.LOG</c> is renamed to <c>PREVIOUS.LOG</c>, and a new <c>LATEST.LOG</c> file is created. Once the log has been successfully dumped, the file - <c>PREVIOUS.LOG</c> is deleted. - </p> - <p>The log is also dumped at start-up and whenever a schema - operation is performed. - </p> + <c>PREVIOUS.LOG</c> is deleted.</p> + <p>The log is also dumped at startup and whenever a schema + operation is performed.</p> </section> <section> - <title>The Data Files</title> - <p>The directory listing also contains one .DAT file. This contain - the schema itself, contained in the <c>schema.DAT</c> - file. The DAT files are indexed files, and it is efficient to - insert and search for records in these files with a specific - key. The .DAT files are used for the schema and for <c>disc_only_copies</c> - tables. The Mnesia data files are currently implemented with the - standard library module <c>dets</c>, and all operations which - can be performed on <c>dets</c> files can also be performed on - the Mnesia data files. For example, <c>dets</c> contains a - function <c>dets:traverse/2</c> which can be used to view the - contents of a Mnesia DAT file. However, this can only be done - when Mnesia is not running. So, to view a our schema file, we - can: </p> + <title>Data Files</title> + <p>The directory listing also contains one <c>.DAT</c> file, + which contains the schema itself, contained in the + <c>schema.DAT</c> file. The <c>DAT</c> files are indexed + files, and it is efficient to insert and search for records + in these files with a specific key. The <c>.DAT</c> files + are used for the schema and for <c>disc_only_copies</c> + tables. The <c>Mnesia</c> data files are currently implemented + in the standard library module + <seealso marker="stdlib:dets">dets</seealso> in + <c>STDLIB</c>.</p> + <p>All operations that can be performed on <c>dets</c> files + can also be performed on the <c>Mnesia</c> data files. For + example, <c>dets</c> contains the function + <c>dets:traverse/2</c>, which can be used to view the + contents of a <c>Mnesia</c> <c>DAT</c> file. However, this + can only be done when <c>Mnesia</c> is not running. So, to + view the schema file, do as follows;</p> <pre> {ok, N} = dets:open_file(schema, [{file, "./schema.DAT"},{repair,false}, {keypos, 2}]), F = fun(X) -> io:format("~p~n", [X]), continue end, dets:traverse(N, F), -dets:close(N). </pre> - <note> - <p>Refer to the Reference Manual, <c>std_lib</c> for information about <c>dets</c>.</p> - </note> +dets:close(N).</pre> <warning> - <p>The DAT files must always be opened with the <c>{repair, false}</c> - option. This ensures that these files are not - automatically repaired. Without this option, the database may - become inconsistent, because Mnesia may - believe that the files were properly closed. Refer to the reference - manual for information about the configuration parameter - <c>auto_repair</c>.</p> + <p>The <c>DAT</c> files must always be opened with option + <c>{repair, false}</c>. This ensures that these files are not + automatically repaired. Without this option, the database can + become inconsistent, because <c>Mnesia</c> can believe that + the files were properly closed. For information about + configuration parameter <c>auto_repair</c>, see the + Reference Manual.</p> </warning> <warning> - <p>It is recommended that Data files are not tampered with while Mnesia is - running. While not prohibited, the behavior of Mnesia is unpredictable. </p> + <p>It is recommended that the data files are not tampered + with while <c>Mnesia</c> is running. While not prohibited, + the behavior of <c>Mnesia</c> is unpredictable.</p> </warning> - <p>The <c>disc_copies</c> tables are stored on disk with .DCL and .DCD files, - which are standard disk_log files. - </p> + <p>The <c>disc_copies</c> tables are stored on disk with + <c>.DCL</c> and <c>.DCD</c> files, which are standard + <c>disk_log</c> files.</p> </section> </section> <section> - <title>Loading of Tables at Start-up</title> - <p>At start-up Mnesia loads tables in order to make them accessible - for its applications. Sometimes Mnesia decides to load all tables - that reside locally, and sometimes the tables may not be - accessible until Mnesia brings a copy of the table - from another node. - </p> - <p>To understand the behavior of Mnesia at start-up it is - essential to understand how Mnesia reacts when it loses contact - with Mnesia on another node. At this stage, Mnesia cannot distinguish - between a communication failure and a "normal" node down. <br></br> - - When this happens, Mnesia will assume that the other node is no longer running. - Whereas, in reality, the communication between the nodes has merely failed. - </p> - <p>To overcome this situation, simply try to restart the ongoing transactions that are - accessing tables on the failing node, and write a <c>mnesia_down</c> entry to a log file. - </p> - <p>At start-up, it must be noted that all tables residing on nodes - without a <c>mnesia_down</c> entry, may have fresher replicas. - Their replicas may have been updated after the termination - of Mnesia on the current node. In order to catch up with the latest + <title>Loading Tables at Startup</title> + <p>At startup, <c>Mnesia</c> loads tables to make them accessible + for its applications. Sometimes <c>Mnesia</c> decides to load + all tables that reside locally, and sometimes the tables are + not accessible until <c>Mnesia</c> brings a copy of the table + from another node.</p> + <p>To understand the behavior of <c>Mnesia</c> at startup, it is + essential to understand how <c>Mnesia</c> reacts when it loses + contact with <c>Mnesia</c> on another node. At this stage, + <c>Mnesia</c> cannot distinguish between a communication + failure and a "normal" node-down. When this occurs, + <c>Mnesia</c> assumes that the other node is no longer running, + whereas, in reality, the communication between the nodes has + failed.</p> + <p>To overcome this situation, try to restart the ongoing + transactions that are accessing tables on the failing node, + and write a <c>mnesia_down</c> entry to a log file.</p> + <p>At startup, notice that all tables residing on nodes + without a <c>mnesia_down</c> entry can have fresher replicas. + Their replicas can have been updated after the termination of + <c>Mnesia</c> on the current node. To catch up with the latest updates, transfer a copy of the table from one of these other - "fresh" nodes. If you are unlucky, other nodes may be down - and you must wait for the table to be - loaded on one of these nodes before receiving a fresh copy of - the table. - </p> + "fresh" nodes. If you are unlucky, other nodes can be down + and you must wait for the table to be loaded on one of these + nodes before receiving a fresh copy of the table.</p> <p>Before an application makes its first access to a table, - <c>mnesia:wait_for_tables(TabList, Timeout)</c> ought to be executed + <seealso marker="mnesia#wait_for_tables/2">mnesia:wait_for_tables(TabList, Timeout)</seealso> + is to be executed to ensure that the table is accessible from the local node. If - the function times out the application may choose to force a + the function times out, the application can choose to force a load of the local replica with - <c>mnesia:force_load_table(Tab)</c> and deliberately lose all - updates that may have been performed on the other nodes while - the local node was down. If - Mnesia already has loaded the table on another node or intends - to do so, we will copy the table from that node in order to - avoid unnecessary inconsistency. - </p> + <seealso marker="mnesia#force_load_table/1">mnesia:force_load_table(Tab)</seealso> + and deliberately lose all + updates that can have been performed on the other nodes while + the local node was down. If <c>Mnesia</c> + has loaded the table on another node already, or intends + to do so, copy the table from that node to + avoid unnecessary inconsistency.</p> <warning> - <p>Keep in mind that it is only - one table that is loaded by <c>mnesia:force_load_table(Tab)</c> - and since committed transactions may have caused updates in - several tables, the tables may now become inconsistent due to - the forced load.</p> + <p>Only one table is loaded by + <seealso marker="mnesia#force_load_table/1">mnesia:force_load_table(Tab)</seealso>. + Since committed + transactions can have caused updates in several tables, the + tables can become inconsistent because of the forced load.</p> </warning> - <p>The allowed <c>AccessMode</c> of a table may be defined to - either be <c>read_only</c> or <c>read_write</c>. And it may be - toggled with the function <c>mnesia:change_table_access_mode(Tab, AccessMode)</c> in runtime. <c>read_only</c> tables and - <c>local_content</c> tables will always be loaded locally, since - there are no need for copying the table from other nodes. Other - tables will primary be loaded remotely from active replicas on - other nodes if the table already has been loaded there, or if - the running Mnesia already has decided to load the table there. - </p> - <p>At start up, Mnesia will assume that its local replica is the - most recent version and load the table from disc if either - situation is detected: - </p> + <p>The allowed <c>AccessMode</c> of a table can be defined to be + <c>read_only</c> or <c>read_write</c>. It can be toggled with + the function + <seealso marker="mnesia#change_table_access_mode/2"> + mnesia:change_table_access_mode(Tab, AccessMode)</seealso> + in runtime. <c>read_only</c> tables and + <c>local_content</c> tables are always loaded locally, as + there is no need for copying the table from other nodes. Other + tables are primarily loaded remotely from active replicas on + other nodes if the table has been loaded there already, or if + the running <c>Mnesia</c> has decided to load the table there + already.</p> + <p>At startup, <c>Mnesia</c> assumes that its local replica is the + most recent version and loads the table from disc if either of + the following situations is detected:</p> <list type="bulleted"> - <item><c>mnesia_down</c> is returned from all other nodes that holds a disc - resident replica of the table; or,</item> - <item>if all replicas are <c>ram_copies</c></item> + <item><c>mnesia_down</c> is returned from all other nodes that + hold a disc resident replica of the table.</item> + <item>All replicas are <c>ram_copies</c>.</item> </list> - <p>This is normally a wise decision, but it may turn out to - be disastrous if the nodes have been disconnected due to a - communication failure, since Mnesia's normal table load - mechanism does not cope with communication failures. - </p> - <p>When Mnesia is loading many tables the default load - order. However, it is possible to - affect the load order by explicitly changing the - <c>load_order</c> property for the tables, with the function - <c>mnesia:change_table_load_order(Tab, LoadOrder)</c>. The - <c>LoadOrder</c> is by default <c>0</c> for all tables, but it - can be set to any integer. The table with the highest - <c>load_order</c> will be loaded first. Changing load order is + <p>This is normally a wise decision, but it can be disastrous + if the nodes have been disconnected because of a communication + failure, as the <c>Mnesia</c> normal table load + mechanism does not cope with communication failures.</p> + <p>When <c>Mnesia</c> loads many tables, the default load order + is used. However, the load order + can be affected, by explicitly changing property + <c>load_order</c> for the tables, with the function + <seealso marker="mnesia#change_table_load_order/2"> + mnesia:change_table_load_order(Tab, LoadOrder)</seealso>. + <c>LoadOrder</c> is by default <c>0</c> for all tables, but + it can be set to any integer. The table with the highest + <c>load_order</c> is loaded first. Changing the load order is especially useful for applications that need to ensure early - availability of fundamental tables. Large peripheral - tables should have a low load order value, perhaps set - below 0. - </p> + availability of fundamental tables. Large peripheral tables + are to have a low load order value, perhaps less than <c>0</c></p> </section> <section> <title>Recovery from Communication Failure</title> - <p>There are several occasions when Mnesia may detect that the - network has been partitioned due to a communication failure. - </p> - <p>One is when Mnesia already is up and running and the Erlang - nodes gain contact again. Then Mnesia will try to contact Mnesia - on the other node to see if it also thinks that the network has - been partitioned for a while. If Mnesia on both nodes has logged - <c>mnesia_down</c> entries from each other, Mnesia generates a - system event, called <c>{inconsistent_database, running_partitioned_network, Node}</c> which is sent to Mnesia's - event handler and other possible subscribers. The default event - handler reports an error to the error logger. - </p> - <p>Another occasion when Mnesia may detect that the network has - been partitioned due to a communication failure, is at start-up. - If Mnesia detects that both the local node and another node received - <c>mnesia_down</c> from each other it generates a - <c>{inconsistent_database, starting_partitioned_network, Node}</c> system event and acts as described above. - </p> + <p>There are several occasions when <c>Mnesia</c> can detect + that the network has been partitioned because of a + communication failure, for example:</p> + <list type="bulleted"> + <item><c>Mnesia</c> is operational already and the Erlang nodes + gain contact again. Then <c>Mnesia</c> tries to contact + <c>Mnesia</c> on the other node to see if it also thinks that + the network has been partitioned for a while. If <c>Mnesia</c> + on both nodes has logged <c>mnesia_down</c> entries from each + other, <c>Mnesia</c> generates a system event, called + <c>{inconsistent_database, running_partitioned_network, Node}</c>, + which is sent to the <c>Mnesia</c> event handler and other + possible subscribers. The default event + handler reports an error to the error logger. + </item> + <item>If <c>Mnesia</c> detects at startup that both the local + node and another node received <c>mnesia_down</c> from each + other, <c>Mnesia</c> generates an + <c>{inconsistent_database, starting_partitioned_network, Node}</c> + system event and acts as described in the previous item. + </item> + </list> <p>If the application detects that there has been a communication - failure which may have caused an inconsistent database, it may - use the function <c>mnesia:set_master_nodes(Tab, Nodes)</c> to - pinpoint from which nodes each table may be loaded.</p> - <p>At start-up Mnesia's normal table load algorithm will be - bypassed and the table will be loaded from one of the master + failure that can have caused an inconsistent database, it can + use the function + <seealso marker="mnesia#set_master_nodes/2">mnesia:set_master_nodes(Tab, Nodes)</seealso> + to pinpoint from which nodes each table can be loaded.</p> + <p>At startup, the <c>Mnesia</c> normal table load algorithm is + bypassed and the table is loaded from one of the master nodes defined for the table, regardless of potential - <c>mnesia_down</c> entries in the log. The <c>Nodes</c> may only - contain nodes where the table has a replica and if it is empty, - the master node recovery mechanism for the particular table will - be reset and the normal load mechanism will be used when next - restarting. - </p> - <p>The function <c>mnesia:set_master_nodes(Nodes)</c> sets master - nodes for all tables. For each table it will determine its - replica nodes and invoke <c>mnesia:set_master_nodes(Tab, TabNodes)</c> with those replica nodes that are included in the - <c>Nodes</c> list (i.e. <c>TabNodes</c> is the intersection of + <c>mnesia_down</c> entries in the log. <c>Nodes</c> can only + contain nodes where the table has a replica. If <c>Nodes</c> + is empty, the master node recovery mechanism for the particular + table is reset and the normal load mechanism is used at the + next restart.</p> + <p>The function + <seealso marker="mnesia#set_master_nodes/1">mnesia:set_master_nodes(Nodes)</seealso> + sets master + nodes for all tables. For each table it determines its replica + nodes and starts + <seealso marker="mnesia#set_master_nodes/2">mnesia:set_master_nodes(Tab, TabNodes)</seealso> + with those replica nodes that are included in the <c>Nodes</c> + list (that is, <c>TabNodes</c> is the intersection of <c>Nodes</c> and the replica nodes of the table). If the - intersection is empty the master node recovery mechanism for the - particular table will be reset and the normal load mechanism - will be used at next restart. - </p> - <p>The functions <c>mnesia:system_info(master_node_tables)</c> and - <c>mnesia:table_info(Tab, master_nodes)</c> may be used to - obtain information about the potential master nodes. - </p> - <p>Determining which data to keep after communication failure is outside - the scope of Mnesia. One approach would be to determine which "island" - contains a majority of the nodes. Using the <c>{majority,true}</c> option - for critical tables can be a way of ensuring that nodes that are not part - of a "majority island" are not able to update those tables. Note that this - constitutes a reduction in service on the minority nodes. This would be - a tradeoff in favour of higher consistency guarantees.</p> - <p>The function <c>mnesia:force_load_table(Tab)</c> may be used to - force load the table regardless of which table load mechanism - is activated. - </p> + intersection is empty, the master node recovery mechanism for + the particular table is reset and the normal load mechanism + is used at the next restart.</p> + <p>The functions + <seealso marker="mnesia#system_info/1">mnesia:system_info(master_node_tables)</seealso> + and + <seealso marker="mnesia#table_info/2">mnesia:table_info(Tab, master_nodes)</seealso> + can be used to + obtain information about the potential master nodes.</p> + <p>Determining what data to keep after a communication failure + is outside the scope of <c>Mnesia</c>. One approach is to + determine which "island" contains most of the nodes. Using + option <c>{majority,true}</c> for critical tables can be a way + to ensure that nodes that are not part of a "majority island" + cannot update those tables. Notice that this constitutes a + reduction in service on the minority nodes. This would be a + tradeoff in favor of higher consistency guarantees.</p> + <p>The function + <seealso marker="mnesia#force_load_table/1">mnesia:force_load_table(Tab)</seealso> + can be used to force load the table regardless of which table + load mechanism that is activated.</p> </section> <section> <title>Recovery of Transactions</title> - <p>A Mnesia table may reside on one or more nodes. When a table is - updated, Mnesia will ensure that the updates will be replicated - to all nodes where the table resides. If a replica happens to be - inaccessible for some reason (e.g. due to a temporary node down), - Mnesia will then perform the replication later. - </p> - <p>On the node where the application is started, there will be a + <p>A <c>Mnesia</c> table can reside on one or more nodes. When a + table is updated, <c>Mnesia</c> ensures that the updates are + replicated to all nodes where the table resides. If a replica is + inaccessible (for example, because of a temporary node-down), + <c>Mnesia</c> performs the replication later.</p> + <p>On the node where the application is started, there is a transaction coordinator process. If the transaction is - distributed, there will also be a transaction participant process on - all the other nodes where commit work needs to be performed. - </p> - <p>Internally Mnesia uses several commit protocols. The selected - protocol depends on which table that has been updated in - the transaction. If all the involved tables are symmetrically - replicated, (i.e. they all have the same <c>ram_nodes</c>, - <c>disc_nodes</c> and <c>disc_only_nodes</c> currently + distributed, there is also a transaction participant process on + all the other nodes where commit-work needs to be performed.</p> + <p>Internally <c>Mnesia</c> uses several commit protocols. The + selected protocol depends on which table that has been updated + in the transaction. If all the involved tables are symmetrically + replicated (that is, they all have the same <c>ram_nodes</c>, + <c>disc_nodes</c>, and <c>disc_only_nodes</c> currently accessible from the coordinator node), a lightweight transaction - commit protocol is used. - </p> + commit protocol is used.</p> <p>The number of messages that the - transaction coordinator and its participants needs to exchange - is few, since Mnesia's table load mechanism takes care of the - transaction recovery if the commit protocol gets + transaction coordinator and its participants need to exchange + is few, as the <c>Mnesia</c> table load mechanism takes care of + the transaction recovery if the commit protocol gets interrupted. Since all involved tables are replicated - symmetrically the transaction will automatically be recovered by - loading the involved tables from the same node at start-up of a - failing node. We do not really care if the transaction was - aborted or committed as long as we can ensure the ACID - properties. The lightweight commit protocol is non-blocking, - i.e. the surviving participants and their coordinator will - finish the transaction, regardless of some node crashes in the - middle of the commit protocol or not. - </p> - <p>If a node goes down in the middle of a dirty operation the - table load mechanism will ensure that the update will be - performed on all replicas or none. Both asynchronous dirty + symmetrically, the transaction is automatically recovered by + loading the involved tables from the same node at startup of a + failing node. It does not matter if the transaction was + committed or terminated as long as the ACID properties can be + ensured. The lightweight commit protocol is non-blocking, + that is, the surviving participants and their coordinator + finish the transaction, even if any node crashes in the + middle of the commit protocol.</p> + <p>If a node goes down in the middle of a dirty operation, the + table load mechanism ensures that the update is + performed on all replicas, or none. Both asynchronous dirty updates and synchronous dirty updates use the same recovery - principle as lightweight transactions. - </p> + principle as lightweight transactions.</p> <p>If a transaction involves updates of asymmetrically replicated tables or updates of the schema table, a heavyweight commit - protocol will be used. The heavyweight commit protocol is able - to finish the transaction regardless of how the tables are - replicated. The typical usage of a heavyweight transaction is - when we want to move a replica from one node to another. Then we - must ensure that the replica either is entirely moved or left as - it was. We must never end up in a situation with replicas on both - nodes or no node at all. Even if a node crashes in the middle of - the commit protocol, the transaction must be guaranteed to be + protocol is used. This protocol can + finish the transaction regardless of how the tables are + replicated. The typical use of a heavyweight transaction is + when a replica is to be moved from one node to another. Then + ensure that the replica either is entirely moved or left as + it was. Do never end up in a situation with replicas on both + nodes, or on no node at all. Even if a node crashes in the middle + of the commit protocol, the transaction must be guaranteed to be atomic. The heavyweight commit protocol involves more messages between the transaction coordinator and its participants than - a lightweight protocol and it will perform recovery work at - start-up in order to finish the abort or commit work. - </p> + a lightweight protocol, and it performs recovery work at + startup to finish the terminating or commit work.</p> <p>The heavyweight commit protocol is also non-blocking, which allows the surviving participants and their coordinator to finish the transaction regardless (even if a node crashes in the - middle of the commit protocol). When a node fails at start-up, - Mnesia will determine the outcome of the transaction and - recover it. Lightweight protocols, heavyweight protocols and dirty updates, are - dependent on other nodes to be up and running in order to make the - correct heavyweight transaction recovery decision. - </p> - <p>If Mnesia has not started on some of the nodes that are involved in the - transaction AND neither the local node or any of the already - running nodes know the outcome of the transaction, Mnesia will - by default wait for one. In the worst case scenario all other - involved nodes must start before Mnesia can make the correct decision - about the transaction and finish its start-up. - </p> - <p>This means that Mnesia (on one node)may hang if a double fault occurs, i.e. when two nodes crash simultaneously - and one attempts to start when the other refuses to - start e.g. due to a hardware error. - </p> - <p>It is possible to specify the maximum time that Mnesia - will wait for other nodes to respond with a transaction - recovery decision. The configuration parameter - <c>max_wait_for_decision</c> defaults to infinity (which may - cause the indefinite hanging as mentioned above) but if it is - set to a definite time period (eg.three minutes), Mnesia will then enforce a - transaction recovery decision if needed, in order to allow - Mnesia to continue with its start-up procedure. </p> - <p>The downside of an enforced transaction recovery decision, is that the decision may be - incorrect, due to insufficient information regarding the other nodes' - recovery decisions. This may result in an - inconsistent database where Mnesia has committed the transaction - on some nodes but aborted it on others. </p> - <p>In fortunate cases the inconsistency will only appear in tables belonging to a specific - application, but if a schema transaction has been inconsistently - recovered due to the enforced transaction recovery decision, the - effects of the inconsistency can be fatal. + middle of the commit protocol). When a node fails at startup, + <c>Mnesia</c> determines the outcome of the transaction and + recovers it. Lightweight protocols, heavyweight protocols, and + dirty updates, are dependent on other nodes to be operational + to make the correct heavyweight transaction recovery decision.</p> + <p>If <c>Mnesia</c> has not started on some of the nodes that + are involved in the transaction <em>and</em> neither the + local node nor any of the already running nodes know the + outcome of the transaction, <c>Mnesia</c> waits for one, + by default. In the worst case scenario, all other involved + nodes must start before <c>Mnesia</c> can make the correct + decision about the transaction and finish its startup.</p> + <p>Thus, <c>Mnesia</c> (on one node) can hang if a double fault + occurs, that is, when two nodes crash simultaneously + and one attempts to start when the other refuses to + start, for example, because of a hardware error.</p> + <p>The maximum time that <c>Mnesia</c> waits for other nodes to + respond with a transaction recovery decision can be specified. + The configuration parameter <c>max_wait_for_decision</c> + defaults to <c>infinity</c>, which can cause the indefinite + hanging as mentioned earlier. However, if the parameter is + set to a definite time period (for example, three minutes), + <c>Mnesia</c> then enforces a transaction recovery decision, + if needed, to allow <c>Mnesia</c> to continue with its startup + procedure.</p> + <p>The downside of an enforced transaction recovery decision is + that the decision can be incorrect, because of insufficient + information about the recovery decisions from the other nodes. + This can result in an inconsistent database where <c>Mnesia</c> + has committed the transaction on some nodes but terminated it + on others.</p> + <p>In fortunate cases, the inconsistency is only visible in + tables belonging to a specific application. However, if a + schema transaction is inconsistently recovered because of + the enforced transaction recovery decision, the + effects of the inconsistency can be fatal. However, if the higher priority is availability rather than - consistency, then it may be worth the risk. </p> - <p>If Mnesia - encounters a inconsistent transaction decision a - <c>{inconsistent_database, bad_decision, Node}</c> system event - will be generated in order to give the application a chance to - install a fallback or other appropriate measures to resolve the inconsistency. The default - behavior of the Mnesia event handler is the same as if the - database became inconsistent as a result of partitioned network (see - above). - </p> + consistency, it can be worth the risk.</p> + <p>If <c>Mnesia</c> detects an inconsistent transaction decision, + an <c>{inconsistent_database, bad_decision, Node}</c> system event + is generated to give the application a chance to install a + fallback or other appropriate measures to resolve the + inconsistency. The default behavior of the <c>Mnesia</c> + event handler is the same as if the database became + inconsistent as a result of partitioned network (as + described earlier).</p> </section> <section> - <title>Backup, Fallback, and Disaster Recovery</title> - <p>The following functions are used to backup data, to install a - backup as fallback, and for disaster recovery. - </p> + <title>Backup, Restore, Fallback, and Disaster Recovery</title> + <p>The following functions are used to back up data, to install + a backup as fallback, and for disaster recovery:</p> <list type="bulleted"> - <item><c>mnesia:backup_checkpoint(Name, Opaque, [Mod])</c>. This - function performs a backup of the tables included in the - checkpoint. + <item> + <seealso marker="mnesia#backup_checkpoint/2">mnesia:backup_checkpoint(Name, Opaque, [Mod])</seealso> + performs a backup of the tables included in the checkpoint. </item> - <item><c>mnesia:backup(Opaque, [Mod])</c>. This function - activates a new checkpoint which covers all Mnesia tables and + <item> + <seealso marker="mnesia#backup/1">mnesia:backup(Opaque, [Mod])</seealso> + activates a new + checkpoint that covers all <c>Mnesia</c> tables and performs a backup. It is performed with maximum degree of - redundancy (also refer to the function <seealso marker="#checkpoints">mnesia:activate_checkpoint(Args)</seealso>, - <c>{max, MaxTabs} and {min, MinTabs}).</c></item> - <item><c>mnesia:traverse_backup(Source,[SourceMod,]</c><c>Target,[TargetMod,]Fun,Ac)</c>. This function can be used - to read an existing backup, create a new backup from an - existing one, or to copy a backup from one type media to - another. + redundancy (see also the function + <seealso marker="#checkpoints">mnesia:activate_checkpoint(Args)</seealso>, + <c>{max, MaxTabs} and {min, MinTabs})</c>. </item> - <item><c>mnesia:uninstall_fallback()</c>. This function removes - previously installed fallback files. + <item> + <seealso marker="mnesia#traverse_backup/4">mnesia:traverse_backup(Source, [SourceMod,] Target, [TargetMod,] Fun, Acc)</seealso> + can be used to read an existing backup, create a backup from an + existing one, or to copy a backup from one type media to another. </item> - <item><c>mnesia:restore(Opaque, Args)</c>. This function + <item> + <seealso marker="mnesia#uninstall_fallback/0">mnesia:uninstall_fallback()</seealso> + removes previously installed fallback files. + </item> + <item> + <seealso marker="mnesia#restore/2">mnesia:restore(Opaque, Args)</seealso> restores a set of tables from a previous backup. </item> - <item><c>mnesia:install_fallback(Opaque, [Mod])</c>. This - function can be configured to restart the Mnesia and reload data - tables, and possibly schema tables, from an existing + <item> + <seealso marker="mnesia#install_fallback/1">mnesia:install_fallback(Opaque, [Mod])</seealso> + can be configured to restart <c>Mnesia</c> and the reload data + tables, and possibly the schema tables, from an existing backup. This function is typically used for disaster recovery - purposes, when data or schema tables are corrupted.</item> + purposes, when data or schema tables are corrupted. + </item> </list> - <p>These functions are explained in the following - sub-sections. Also refer to the the section <seealso marker="#checkpoints">Checkpoints</seealso> in this chapter, which - describes the two functions used to activate and de-activate - checkpoints. - </p> + <p>These functions are explained in the following sections. + See also <seealso marker="#checkpoints">Checkpoints</seealso>, + which describes the two functions used + to activate and deactivate checkpoints.</p> <section> <title>Backup</title> - <p>Backup operation are performed with the following functions: - </p> + <p>Backup operation are performed with the following functions:</p> <list type="bulleted"> - <item><c>mnesia:backup_checkpoint(Name, Opaque, [Mod])</c></item> - <item><c>mnesia:backup(Opaque, [Mod])</c></item> - <item><c>mnesia:traverse_backup(Source, [SourceMod,],</c><c>Target,[TargetMod,]Fun,Acc)</c>.</item> + <item> + <seealso marker="mnesia#backup_checkpoint/2">mnesia:backup_checkpoint(Name, Opaque, [Mod])</seealso> + </item> + <item> + <seealso marker="mnesia#backup/1">mnesia:backup(Opaque, [Mod])</seealso> + </item> + <item> + <seealso marker="mnesia#traverse_backup/4">mnesia:traverse_backup(Source, [SourceMod,] Target, [TargetMod,] Fun, Acc)</seealso> + </item> </list> <p>By default, the actual access to the backup media is - performed via the <c>mnesia_backup</c> module for both read + performed through module <c>mnesia_backup</c> for both read and write. Currently <c>mnesia_backup</c> is implemented with - the standard library module <c>disc_log</c>, but it is possible to write - your own module with the same interface as - <c>mnesia_backup</c> and configure Mnesia so the alternate - module performs the actual accesses to the backup media. This - means that the user may put the backup on medias that Mnesia + the standard library module <c>disc_log</c>. However, you + can write your own module with the same interface as + <c>mnesia_backup</c> and configure <c>Mnesia</c> so that + the alternative module performs the actual accesses to + the backup media. The user can + therefore put the backup on a media that <c>Mnesia</c> does not know about, possibly on hosts where Erlang is not - running. Use the configuration parameter <c><![CDATA[-mnesia backup_module <module>]]></c> for this purpose. </p> - <p>The source - for a backup is an activated checkpoint. The backup function - most commonly used is <c>mnesia:backup_checkpoint(Name, Opaque,[Mod])</c>. This function returns either <c>ok</c>, or - <c>{error,Reason}</c>. It has the following arguments: - </p> + running. Use configuration parameter + <c><![CDATA[-mnesia backup_module <module>]]></c> + for this purpose.</p> + <p>The source for a backup is an activated checkpoint. + The backup function + <seealso marker="mnesia#backup_checkpoint/2">mnesia:backup_checkpoint(Name, Opaque,[Mod])</seealso> + is most commonly used and returns <c>ok</c> or + <c>{error,Reason}</c>. It has the following arguments:</p> <list type="bulleted"> - <item><c>Name</c> is the name of an activated - checkpoint. Refer to the section <seealso marker="#checkpoints">Checkpoints</seealso> in this chapter, the - function <c>mnesia:activate_checkpoint(ArgList)</c> for - details on how to include table names in checkpoints. + <item><c>Name</c> is the name of an activated checkpoint. + For details on how to include table names in checkpoints, + see the function <c>mnesia:activate_checkpoint(ArgList)</c> + in <seealso marker="#checkpoints">Checkpoints</seealso>. </item> - <item><c>Opaque</c>. Mnesia does not interpret this argument, - but it is forwarded to the backup module. The Mnesia default - backup module, <c>mnesia_backup</c> interprets this argument - as a local file name. + <item><c>Opaque</c>. <c>Mnesia</c> does not interpret this + argument, but it is forwarded to the backup module. The + <c>Mnesia</c> default backup module <c>mnesia_backup</c> + interprets this argument as a local filename. </item> - <item><c>Mod</c>. The name of an alternate backup module. + <item><c>Mod</c> is the name of an alternative backup module. </item> </list> - <p>The function <c>mnesia:backup(Opaque[, Mod])</c> activates a - new checkpoint which covers all Mnesia tables with maximum - degree of redundancy and performs a backup. Maximum + <p>The function + <seealso marker="mnesia#backup/1">mnesia:backup(Opaque [,Mod])</seealso> + activates a + new checkpoint that covers all <c>Mnesia</c> tables with + maximum degree of redundancy and performs a backup. Maximum redundancy means that each table replica has a checkpoint - retainer. Tables with the <c>local_contents</c> property are - backed up as they - look on the current node. - </p> - <p>It is possible to iterate over a backup, either for the - purpose of transforming it into a new backup, or just reading - it. The function <c>mnesia:traverse_backup(Source, [SourceMod,]</c><c>Target, [TargeMod,] Fun, Acc)</c> which normally returns <c>{ok, LastAcc}</c>, is used for both of these purposes. - </p> + retainer. Tables with property <c>local_contents</c> are + backed up as they look on the current node.</p> + <p>You can iterate over a backup, either to transform it + into a new backup, or only read it. The function + <seealso marker="mnesia#traverse_backup/4">mnesia:traverse_backup(Source, [SourceMod,] Target, [TargetMod,] Fun, Acc)</seealso>, + which normally returns <c>{ok, LastAcc}</c>, + is used for both of these purposes.</p> <p>Before the traversal starts, the source backup media is opened with <c>SourceMod:open_read(Source)</c>, and the target backup media is opened with - <c>TargetMod:open_write(Target)</c>. The arguments are: - </p> + <c>TargetMod:open_write(Target)</c>. The arguments are as + follows:</p> <list type="bulleted"> <item><c>SourceMod</c> and <c>TargetMod</c> are module names. </item> <item><c>Source</c> and <c>Target</c> are opaque data used exclusively by the modules <c>SourceMod</c> and - <c>TargetMod</c> for the purpose of initializing the backup - medias. + <c>TargetMod</c> for initializing the backup medias. </item> <item><c>Acc</c> is an initial accumulator value. </item> <item><c>Fun(BackupItems, Acc)</c> is applied to each item in - the backup. The Fun must return a tuple <c>{ValGoodBackupItems, NewAcc}</c>, where <c>ValidBackupItems</c> is a list of valid - backup items, and <c>NewAcc</c> is a new accumulator value. + the backup. The Fun must return a tuple + <c>{ValGoodBackupItems, NewAcc}</c>, + where <c>ValidBackupItems</c> is a list of valid + backup items. <c>NewAcc</c> is a new accumulator value. The <c>ValidBackupItems</c> are written to the target backup with the function <c>TargetMod:write/2</c>. </item> - <item><c>LastAcc</c> is the last accumulator value. I.e. + <item><c>LastAcc</c> is the last accumulator value, that is, the last <c>NewAcc</c> value that was returned by <c>Fun</c>. </item> </list> - <p>It is also possible to perform a read-only traversal of the - source backup without updating a target backup. If - <c>TargetMod==read_only</c>, then no target backup is accessed - at all. - </p> + <p>Also, a read-only traversal of the source backup can be + performed without updating a target backup. If + <c>TargetMod==read_only</c>, no target backup is accessed.</p> <p>By setting <c>SourceMod</c> and <c>TargetMod</c> to different - modules it is possible to copy a backup from one kind of backup - media to another. - </p> - <p>Valid <c>BackupItems</c> are the following tuples: - </p> + modules, a backup can be copied from one backup + media to another.</p> + <p>Valid <c>BackupItems</c> are the following tuples:</p> <list type="bulleted"> <item><c>{schema, Tab}</c> specifies a table to be deleted. </item> <item><c>{schema, Tab, CreateList}</c> specifies a table to be - created. See <c>mnesia_create_table/2</c> for more - information about <c>CreateList</c>. + created. For more information about <c>CreateList</c>, see + <seealso marker="mnesia#create_table/2">mnesia:create_table/2</seealso>. </item> <item><c>{Tab, Key}</c> specifies the full identity of a record - to be deleted. + to be deleted. </item> <item><c>{Record}</c> specifies a record to be inserted. It - can be a tuple with <c>Tab</c> as first field. Note that the + can be a tuple with <c>Tab</c> as first field. Notice that the record name is set to the table name regardless of what - <c>record_name</c> is set to. + <c>record_name</c> is set to. </item> </list> <p>The backup data is divided into two sections. The first - section contains information related to the schema. All schema - related items are tuples where the first field equals the atom - schema. The second section is the record section. It is not - possible to mix schema records with other records and all schema - records must be located first in the backup. - </p> - <p>The schema itself is a table and will possibly be included in - the backup. All nodes where the schema table resides are - regarded as a <c>db_node</c>. - </p> - <p>The following example illustrates how - <c>mnesia:traverse_backup</c> can be used to rename a db_node in - a backup file: - </p> + section contains information related to the schema. All + schema-related items are tuples where the first field equals + the atom schema. The second section is the record section. + Schema records cannot be mixed with other records and all + schema records must be located first in the backup.</p> + <p>The schema itself is a table and is possibly included in + the backup. Each node where the schema table resides is + regarded as a <c>db_node</c>.</p> + <p>The following example shows how + <seealso marker="mnesia#traverse_backup/4">mnesia:traverse_backup</seealso> + can be used to rename a <c>db_node</c> in a backup file:</p> <codeinclude file="bup.erl" tag="%0" type="erl"></codeinclude> </section> <section> <title>Restore</title> - <p>Tables can be restored on-line from a backup without - restarting Mnesia. A restore is performed with the function - <c>mnesia:restore(Opaque,Args)</c>, where <c>Args</c> can - contain the following tuples: - </p> + <p>Tables can be restored online from a backup without + restarting <c>Mnesia</c>. A restore is performed with the + function + <seealso marker="mnesia#restore/2">mnesia:restore(Opaque, Args)</seealso>, + where <c>Args</c> can contain the following tuples:</p> <list type="bulleted"> <item><c>{module,Mod}</c>. The backup module <c>Mod</c> is used to access the backup media. If omitted, the default - backup module will be used.</item> - <item><c>{skip_tables, TableList}</c> Where <c>TableList</c> - is a list of tables which should not be read from the backup.</item> - <item><c>{clear_tables, TableList}</c> Where <c>TableList</c> - is a list of tables which should be cleared, before the - records from the backup are inserted, i.e. all records in + backup module is used. + </item> + <item><c>{skip_tables, TableList}</c>, where <c>TableList</c> + is a list of tables, which is not to be read from the backup. + </item> + <item><c>{clear_tables, TableList}</c>, where <c>TableList</c> + is a list of tables, which is to be cleared before the + records from the backup are inserted. That is, all records in the tables are deleted before the tables are restored. Schema information about the tables is not cleared or read - from backup.</item> - <item><c>{keep_tables, TableList}</c> Where <c>TableList</c> - is a list of tables which should be not be cleared, before - the records from the backup are inserted, i.e. the records - in the backup will be added to the records in the table. + from the backup. + </item> + <item><c>{keep_tables, TableList}</c>, where <c>TableList</c> + is a list of tables, which is not to be cleared before + the records from the backup are inserted. That is, the records + in the backup are added to the records in the table. Schema information about the tables is not cleared or read - from backup.</item> - <item><c>{recreate_tables, TableList}</c> Where <c>TableList</c> - is a list of tables which should be re-created, before the - records from the backup are inserted. The tables are first - deleted and then created with the schema information from the - backup. All the nodes in the backup needs to be up and running.</item> - <item><c>{default_op, Operation}</c> Where <c>Operation</c> is - one of the following operations <c>skip_tables</c>, - <c>clear_tables</c>, <c>keep_tables</c> or - <c>recreate_tables</c>. The default operation specifies - which operation should be used on tables from the backup - which are not specified in any of the lists above. - If omitted, the operation <c>clear_tables</c> will be used. </item> + from the backup. + </item> + <item><c>{recreate_tables, TableList}</c>, where <c>TableList</c> + is a list of tables, which is to be recreated before the + records from the backup are inserted. The tables are first + deleted and then created with the schema information from the + backup. All the nodes in the backup need to be operational. + </item> + <item><c>{default_op, Operation}</c>, where <c>Operation</c> is + one of the operations <c>skip_tables</c>, + <c>clear_tables</c>, <c>keep_tables</c>, or + <c>recreate_tables</c>. The default operation specifies + which operation is to be used on tables from the backup + that are not specified in any of the previous lists. + If omitted, the operation <c>clear_tables</c> is used. + </item> </list> <p>The argument <c>Opaque</c> is forwarded to the backup module. It returns <c>{atomic, TabList}</c> if successful, or the - tuple <c>{aborted, Reason}</c> in the case of an error. - <c>TabList</c> is a list of the restored tables. Tables which - are restored are write locked for the duration of the restore - operation. However, regardless of any lock conflict caused by + tuple <c>{aborted, Reason}</c> if there is an error. + <c>TabList</c> is a list of the restored tables. Tables that + are restored are write-locked during the restore + operation. However, regardless of any lock conflict caused by this, applications can continue to do their work during the - restore operation. - </p> + restore operation.</p> <p>The restoration is performed as a single transaction. If the - database is very large, it may not be possible to restore it - online. In such a case the old database must be restored by - installing a fallback, and then restart. - </p> + database is large, it cannot always be restored + online. The old database must then be restored by + installing a fallback, followed by a restart.</p> </section> <section> - <title>Fallbacks</title> - <p>The function <c>mnesia:install_fallback(Opaque, [Mod])</c> is - used to install a backup as fallback. It uses the backup module + <title>Fallback</title> + <p>The function + <seealso marker="mnesia#install_fallback/2">mnesia:install_fallback(Opaque, [Mod])</seealso> + installs a backup as fallback. It uses the backup module <c>Mod</c>, or the default backup module, to access the backup - media. This function returns <c>ok</c> if successful, or - <c>{error, Reason}</c> in the case of an error. - </p> - <p>Installing a fallback is a distributed operation that is + media. The function returns <c>ok</c> if successful, or + <c>{error, Reason}</c> if there is an error.</p> + <p>Installing a fallback is a distributed operation, which is <em>only</em> performed on all <c>db_nodes</c>. The fallback - is used to restore the database the next time the system is - started. If a Mnesia node with a fallback installed detects that - Mnesia on another node has died for some reason, it will - unconditionally terminate itself. - </p> + restores the database the next time the system is started. + If a <c>Mnesia</c> node with a fallback installed detects that + <c>Mnesia</c> on another node has died, it + unconditionally terminates itself.</p> <p>A fallback is typically used when a system upgrade is performed. A system typically involves the installation of new - software versions, and Mnesia tables are often transformed into - new layouts. If the system crashes during an upgrade, it is - highly probable re-installation of the old - applications will be required and restoration of the database - to its previous state. This can be done if a backup is performed and - installed as a fallback before the system upgrade begins. - </p> - <p>If the system upgrade fails, Mnesia must be restarted on all - <c>db_nodes</c> in order to restore the old database. The - fallback will be automatically de-installed after a successful - start-up. The function <c>mnesia:uninstall_fallback()</c> may - also be used to de-install the fallback after a + software versions, and <c>Mnesia</c> tables are often transformed + into new layouts. If the system crashes during an upgrade, it is + highly probable that reinstallation of the old applications is + required, and restoration of the database to its previous state. + This can be done if a backup is performed and + installed as a fallback before the system upgrade begins.</p> + <p>If the system upgrade fails, <c>Mnesia</c> must be restarted + on all <c>db_nodes</c> to restore the old database. The + fallback is automatically deinstalled after a successful + startup. The function + <seealso marker="mnesia#uninstall_fallback/0">mnesia:uninstall_fallback()</seealso> + can also be used to deinstall the fallback after a successful system upgrade. Again, this is a distributed - operation that is either performed on all <c>db_nodes</c>, or - none. Both the installation and de-installation of fallbacks - require Erlang to be up and running on all <c>db_nodes</c>, but - it does not matter if Mnesia is running or not. - </p> + operation that is either performed on all <c>db_nodes</c> or + none. Both the installation and deinstallation of fallbacks + require Erlang to be operational on all <c>db_nodes</c>, but + it does not matter if <c>Mnesia</c> is running or not.</p> </section> <section> <title>Disaster Recovery</title> - <p>The system may become inconsistent as a result of a power - failure. The UNIX <c>fsck</c> feature can possibly repair the - file system, but there is no guarantee that the file contents - will be consistent. - </p> - <p>If Mnesia detects that a file has not been properly closed, - possibly as a result of a power failure, it will attempt to - repair the bad file in a similar manner. Data may be lost, but - Mnesia can be restarted even if the data is inconsistent. The - configuration parameter <c><![CDATA[-mnesia auto_repair <bool>]]></c> can be - used to control the behavior of Mnesia at start-up. If - <c><![CDATA[<bool>]]></c> has the value <c>true</c>, Mnesia will attempt to - repair the file; if <c><![CDATA[<bool>]]></c> has the value <c>false</c>, - Mnesia will not restart if it detects a suspect file. This - configuration parameter affects the repair behavior of log - files, DAT files, and the default backup media. - </p> - <p>The configuration parameter <c><![CDATA[-mnesia dump_log_update_in_place <bool>]]></c> controls the safety level of - the <c>mnesia:dump_log()</c> function. By default, Mnesia will - dump the transaction log directly into the DAT files. If a power - failure happens during the dump, this may cause the randomly - accessed DAT files to become corrupt. If the parameter is set to - <c>false</c>, Mnesia will copy the DAT files and target the dump + <p>The system can become inconsistent as a result of a power + failure. The UNIX feature <c>fsck</c> can possibly repair the + file system, but there is no guarantee that the file content + is consistent.</p> + <p>If <c>Mnesia</c> detects that a file has not been properly + closed, possibly as a result of a power failure, it tries to + repair the bad file in a similar manner. Data can be lost, but + <c>Mnesia</c> can be restarted even if the data is inconsistent. + Configuration parameter + <c><![CDATA[-mnesia auto_repair <bool>]]></c> can be used + to control the behavior of <c>Mnesia</c> at startup. If + <c><![CDATA[<bool>]]></c> has the value <c>true</c>, + <c>Mnesia</c> tries to repair the file. If + <c><![CDATA[<bool>]]></c> has the value <c>false</c>, + <c>Mnesia</c> does not restart if it detects a suspect file. + This configuration parameter affects the repair behavior of log + files, <c>DAT</c> files, and the default backup media.</p> + <p>Configuration parameter + <c><![CDATA[-mnesia dump_log_update_in_place <bool>]]></c> + controls the safety level of the function + <seealso marker="mnesia#dump_log/0">mnesia:dump_log()</seealso> + By default, <c>Mnesia</c> dumps the + transaction log directly into the <c>DAT</c> files. If a power + failure occurs during the dump, this can cause the randomly + accessed <c>DAT</c> files to become corrupt. If the parameter + is set to <c>false</c>, <c>Mnesia</c> copies the <c>DAT</c> + files and target the dump to the new temporary files. If the dump is successful, the - temporary files will be renamed to their normal DAT + temporary files are renamed to their normal <c>DAT</c> suffixes. The possibility for unrecoverable inconsistencies in - the data files will be much smaller with this strategy. On the - other hand, the actual dumping of the transaction log will be + the data files becomes much smaller with this strategy. + However, the actual dumping of the transaction log becomes considerably slower. The system designer must decide whether - speed or safety is the higher priority. - </p> - <p>Replicas of type <c>disc_only_copies</c> will only be + speed or safety is the higher priority.</p> + <p>Replicas of type <c>disc_only_copies</c> are only affected by this parameter during the initial dump of the log - file at start-up. When designing applications which have - <em>very</em> high requirements, it may be appropriate not to + file at startup. When designing applications with + <em>very</em> high requirements, it can be appropriate not to use <c>disc_only_copies</c> tables at all. The reason for this is the random access nature of normal operating system files. If - a node goes down for reason for a reason such as a power - failure, these files may be corrupted because they are not - properly closed. The DAT files for <c>disc_only_copies</c> are - updated on a per transaction basis. - </p> - <p>If a disaster occurs and the Mnesia database has been - corrupted, it can be reconstructed from a backup. This should be - regarded as a last resort, since the backup contains old data. The - data is hopefully consistent, but data will definitely be lost - when an old backup is used to restore the database. - </p> + a node goes down for a reason such as a power + failure, these files can be corrupted because they are not + properly closed. The <c>DAT</c> files for <c>disc_only_copies</c> + are updated on a per transaction basis.</p> + <p>If a disaster occurs and the <c>Mnesia</c> database is + corrupted, it can be reconstructed from a backup. Regard + this as a last resort, as the backup contains old data. The + data is hopefully consistent, but data is definitely lost + when an old backup is used to restore the database.</p> </section> </section> </chapter> |