ose: Remove all code related to the OSE port

The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.

1 files changed, 0 insertions, 154 deletions

diff --git a/lib/ose/doc/src/ose_intro.xml b/lib/ose/doc/src/ose_intro.xml
deleted file mode 100644
index 982516c8bd..0000000000
--- a/lib/ose/doc/src/ose_intro.xml
+++ /dev/null
@@ -1,154 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE chapter SYSTEM "chapter.dtd">
-
-<chapter>
-  <header>
-    <copyright>
-      <year>2013</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>Introduction</title>
-    <prepared>Lukas Larsson</prepared>
-    <docno></docno>
-    <date>2014-01-08</date>
-    <rev>A</rev>
-    <file>ose_intro.xml</file>
-  </header>
-
-  <section>
-    <title>Features</title>
-  </section>
-
-  <section>
-    <title>Starting Erlang/OTP</title>
-    <p>
-      Starting Erlang/OTP on OSE is not as simple as on Unix/Windows (yet).
-      First of all you have to explicitly use the beam (or beam.smp) executables
-      found in erts-X.Y.Z/bin as the load module that you run. This in turn
-      means that you have to supply the raw beam arguments to the emulator
-      when starting. Fortunately <c>erl</c> on Unix/Windows has a
-      undocumented flag called <c>-emu_args_exit</c> that can be used to
-      figure out what the arguments to beam look like. For example:</p>
-      <code># erl +Mut false +A 10 +S 4:4 +Muycs256 +P 2096 +Q 2096 -emu_args_exit
--Mut
-false
--A
-10
--S
-4:4
--Muycs256
--P
-2096
--Q
-2096
---
--root
-/usr/local/lib/erlang
--progname
-erl
---
--home
-/home/erlang
---</code>
-    <p>
-      The arguments are printed on separate lines to make it possible to know
-      what has to be quoted with &quot;. Each line is one quotable unit.
-      So taking the arguments above you can supply them to pm_create or
-      just execute directly on the command line. For example:</p>
-      <code>rtose@acp3400> pm_install erlang /mst/erlang/erts-6.0/bin/beam.smp
-rtose@acp3400> pm_create -c ARGV="-Mut false -A 10 -S 4:4 -Muycs256 -P 2096 -Q 2099 -- -root /mst/erlang -progname erl -- -home /mst/erlang --" erlang
-pid: 0x110059
-rtose@acp3400> pm_start 0x110059</code>
-    <p>
-      Also note that since we are running erl to figure out the arguments on a
-      separate machine the paths have to be updated. In the example above
-      <c>/usr/local/lib/erlang</c> was replaced by <c>/mst/erlang/</c>. The
-      goal is to in future releases not have to do the special argument handling
-      but for now (OTP 17.0) you have to do it.
-    </p>
-    <note>
-      Because of a limitation in the way the OSE handles stdio when starting
-      load modules using pm_install/create the Erlang shell only reads every
-      other command from stdin. However if you start Erlang using run_erl
-      you do not have this problem. So it is highly recommended that you
-      start Erlang using run_erl.
-    </note>
-  </section>
-
-  <section>
-    <title>run_erl and to_erl</title>
-    <p>
-      In OSE run_erl and to_erl are combined into a single load module called
-      run_erl_lm. Installing and starting the load module will add two new
-      shell commands called run_erl and to_erl. They work in exactly the same
-      way as the unix variants of run_erl and to_erl, except that the read
-      and write pipes have to be placed under the /pipe vm. One additional
-      option also exists to run_erl on ose:
-      <taglist>
-	<tag><c>-block Name</c></tag>
-	<item>The name of the install handle and block that will be created/used by
-	installing and exectuting the first part of the command. If nothing
-	if given the basename of the load module will be used for this value.
-	Example:
-	<code>pm_install erlang /path/to/erlang/vm/beam.smp
-run_erl -daemon -block erlang /pipe/ /mst/erlang_logs/ "beam.smp -A 1 -- -root /mst/erlang -- -home /mst --"</code>
-	</item>
-      </taglist>
-      The same argument munching as when starting Erlang/OTP without run_erl
-      has to be done. If <c>-daemon</c> is given then all error printouts
-      are sent to the ramlog.
-      See also
-      <seealso marker="erts:run_erl">run_erl</seealso> for more details.
-    </p>
-    <p>
-      Below is an example of how to get started with <c>run_erl_lm</c>.
-      <code>rtose@acp3400> pm_install run_erl_lm /mst/erlang/erts-6.0/bin/run_erl_lm
-rtose@acp3400> pm_create run_erl_lm
-pid: 0x1c005d
-rtose@acp3400> pm_start 0x1c005d
-rtose@acp3400> mkdir /mst/erlang_log
-rtose@acp3400> run_erl -daemon /pipe/ /mst/erlang_log/ "/mst/erlang/erts-6.0/bin/beam.smp -A 1 -- -root /mst/erlang -- -home /mst --"
-rtose@acp3400> to_erl
-Attaching to /pipe/erlang.pipe.1 (^C to exit)
-os:type().
-{ose,release}
-2>
-'to_erl' terminated.</code>
-      Note that Ctrl-C is used instead of Ctrl-D to exit the to_erl shell.
-    </p>
-  </section>
-
-  <section>
-    <title>epmd</title>
-    <p>
-      In OSE epmd will not be started automatically so if you want to use
-      Erlang distribution you have to manually start epmd.
-    </p>
-  </section>
-
-  <section>
-    <title>VM Process Priorities</title>
-    <p>
-      It is possible to set the priorities you want for the OSE processes that
-      thr emulator creates in the lmconf. An example of how to do it can be
-      found in the default lmconf file in
-      $ERL_TOP/erts/emulator/sys/ose/beam.lmconf.
-    </p>
-  </section>
-
-</chapter>