ose: Remove all code related to the OSE port

The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.

10 files changed, 0 insertions, 914 deletions

diff --git a/lib/ose/doc/src/.gitignore b/lib/ose/doc/src/.gitignore
deleted file mode 100644
index 860e9e703e..0000000000
--- a/lib/ose/doc/src/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-ose.xml
diff --git a/lib/ose/doc/src/Makefile b/lib/ose/doc/src/Makefile
deleted file mode 100644
index 7ebd4125ba..0000000000
--- a/lib/ose/doc/src/Makefile
+++ /dev/null
@@ -1,133 +0,0 @@
-#
-# %CopyrightBegin%
-#
-# Copyright Ericsson AB 1997-2012. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# %CopyrightEnd%
-#
-include $(ERL_TOP)/make/target.mk
-include $(ERL_TOP)/make/$(TARGET)/otp.mk
-
-# ----------------------------------------------------
-# Application version
-# ----------------------------------------------------
-include ../../vsn.mk
-VSN=$(OSE_VSN)
-APPLICATION=ose
-
-# ----------------------------------------------------
-# Release directory specification
-# ----------------------------------------------------
-RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN)
-
-# ----------------------------------------------------
-# Help application directory specification
-# ----------------------------------------------------
-EDOC_DIR = $(ERL_TOP)/lib/edoc
-SYNTAX_TOOLS_DIR = $(ERL_TOP)/lib/syntax_tools
-
-# ----------------------------------------------------
-# Target Specs
-# ----------------------------------------------------
-XML_APPLICATION_FILES = ref_man.xml
-
-XML_REF3_FILES = \
-	ose.xml \
-	ose_erl_driver.xml
-
-XML_REF6_FILES = ose_app.xml
-
-XML_PART_FILES = part.xml
-XML_CHAPTER_FILES = notes.xml ose_intro.xml ose_signals_chapter.xml
-
-BOOK_FILES = book.xml
-
-XML_FILES = \
-	$(BOOK_FILES) $(XML_CHAPTER_FILES) \
-	$(XML_PART_FILES) $(XML_REF3_FILES) $(XML_REF6_FILES) \
-	$(XML_APPLICATION_FILES)
-
-# ----------------------------------------------------
-
-HTML_FILES = $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.html) \
-	$(XML_PART_FILES:%.xml=$(HTMLDIR)/%.html)
-
-INFO_FILE = ../../info
-
-MAN3_FILES = $(XML_REF3_FILES:%.xml=$(MAN3DIR)/%.3)
-MAN6_FILES = $(XML_REF6_FILES:%_app.xml=$(MAN6DIR)/%.6)
-
-HTML_REF_MAN_FILE = $(HTMLDIR)/index.html
-
-TOP_PDF_FILE = $(PDFDIR)/$(APPLICATION)-$(VSN).pdf
-
-SPECS_FILES =
-
-TOP_SPECS_FILE =
-
-# ----------------------------------------------------
-# FLAGS
-# ----------------------------------------------------
-XML_FLAGS +=
-
-SPECS_FLAGS = -I../../include -I../../../kernel/include
-
-OSE_SRC_DIR = ../../src
-
-# ----------------------------------------------------
-# Targets
-# ----------------------------------------------------
-docs: man pdf html
-
-$(TOP_PDF_FILE): $(XML_FILES)
-
-pdf: $(TOP_PDF_FILE)
-
-html: $(HTML_REF_MAN_FILE)
-
-man: $(MAN3_FILES) $(MAN6_FILES)
-
-ose.xml: $(OSE_SRC_DIR)/ose.erl
-	escript $(DOCGEN)/priv/bin/xml_from_edoc.escript\
-	 $(OSE_SRC_DIR)/$(@:%.xml=%.erl)
-
-debug opt:
-
-clean clean_docs:
-	rm -rf $(HTMLDIR)/*
-	rm -f $(MAN3DIR)/*
-	rm -f $(MAN6DIR)/*
-	rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo)
-	rm -f $(SPECDIR)/*
-	rm -f errs core *~
-
-# ----------------------------------------------------
-# Release Target
-# ----------------------------------------------------
-include $(ERL_TOP)/make/otp_release_targets.mk
-
-release_docs_spec: docs
-	$(INSTALL_DIR) "$(RELSYSDIR)/doc/pdf"
-	$(INSTALL_DATA) $(TOP_PDF_FILE) "$(RELSYSDIR)/doc/pdf"
-	$(INSTALL_DIR) "$(RELSYSDIR)/doc/html"
-	$(INSTALL_DATA) $(HTMLDIR)/* \
-		"$(RELSYSDIR)/doc/html"
-	$(INSTALL_DATA) $(INFO_FILE) "$(RELSYSDIR)"
-	$(INSTALL_DIR) "$(RELEASE_PATH)/man/man3"
-	$(INSTALL_DATA) $(MAN3DIR)/* "$(RELEASE_PATH)/man/man3"
-	$(INSTALL_DIR) "$(RELEASE_PATH)/man/man6"
-	$(INSTALL_DATA) $(MAN6_FILES) "$(RELEASE_PATH)/man/man6"
-
-release_spec:
diff --git a/lib/ose/doc/src/book.xml b/lib/ose/doc/src/book.xml
deleted file mode 100644
index d62e0d32f4..0000000000
--- a/lib/ose/doc/src/book.xml
+++ /dev/null
@@ -1,49 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE book SYSTEM "book.dtd">
-
-<book xmlns:xi="http://www.w3.org/2001/XInclude">
-  <header titlestyle="normal">
-    <copyright>
-      <year>2014</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>OSE</title>
-    <prepared>Lukas Larsson</prepared>
-    <docno></docno>
-    <date>2014-01-08</date>
-    <rev>1.0</rev>
-    <file>book.xml</file>
-  </header>
-  <insidecover>
-  </insidecover>
-  <pagetext>OSE</pagetext>
-  <preamble>
-    <contents level="2"></contents>
-  </preamble>
-  <parts>
-    <xi:include href="part.xml"/>
-  </parts>
-  <applications>
-    <xi:include href="ref_man.xml"/>
-  </applications>
-  <releasenotes>
-    <xi:include href="notes.xml"/>
-  </releasenotes>
-  <listofterms></listofterms>
-  <index></index>
-</book>
diff --git a/lib/ose/doc/src/notes.xml b/lib/ose/doc/src/notes.xml
deleted file mode 100644
index 06881b6c99..0000000000
--- a/lib/ose/doc/src/notes.xml
+++ /dev/null
@@ -1,109 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE chapter SYSTEM "chapter.dtd">
-
-<chapter>
-  <header>
-    <copyright>
-      <year>2014</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>OSE Release Notes</title>
-    <prepared></prepared>
-    <docno></docno>
-    <date></date>
-    <rev></rev>
-    <file>notes.xml</file>
-  </header>
-  <p>This document describes the changes made to the OSE application.</p>
-
-<section><title>Ose 1.1</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Change license text from Erlang Public License to Apache
-	    Public License v2</p>
-          <p>
-	    Own Id: OTP-12845</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Ose 1.0.2</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Add missing release notes for the OSE application.</p>
-          <p>
-	    Own Id: OTP-12177</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Ose 1.0.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Fix some spelling mistakes in documentation</p>
-          <p>
-	    Own Id: OTP-12152</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Ose 1.0</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Erlang/OTP has been ported to the realtime operating
-	    system OSE. The port supports both smp and non-smp
-	    emulator. For details around the port and how to started
-	    see the User's Guide in the <seealso
-	    marker="ose:ose_intro">ose</seealso> application. </p>
-          <p>
-	    Note that not all parts of Erlang/OTP has been ported. </p>
-          <p>
-	    Notable things that work are: non-smp and smp emulators,
-	    OSE signal interaction, crypto, asn1, run_erl/to_erl,
-	    tcp, epmd, distribution and most if not all non-os
-	    specific functionality of Erlang.</p>
-          <p>
-	    Notable things that does not work are: udp/sctp, os_mon,
-	    erl_interface, binding of schedulers.</p>
-          <p>
-	    Own Id: OTP-11334</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-</chapter>
diff --git a/lib/ose/doc/src/ose_app.xml b/lib/ose/doc/src/ose_app.xml
deleted file mode 100644
index d555f0ec4f..0000000000
--- a/lib/ose/doc/src/ose_app.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE appref SYSTEM "appref.dtd">
-
-<appref>
-  <header>
-    <copyright>
-      <year>2014</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>Enea OSE</title>
-    <prepared></prepared>
-    <docno></docno>
-    <date></date>
-    <rev></rev>
-  </header>
-  <app>ose</app>
-  <appsummary>The OSE Application</appsummary>
-  <description>
-    <p>The OSE application contains modules and documentation that only
-    applies when running Erlang/OTP on Enea OSE.</p>
-  </description>
-
-</appref>
diff --git a/lib/ose/doc/src/ose_erl_driver.xml b/lib/ose/doc/src/ose_erl_driver.xml
deleted file mode 100644
index b804c29d2d..0000000000
--- a/lib/ose/doc/src/ose_erl_driver.xml
+++ /dev/null
@@ -1,111 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE cref SYSTEM "cref.dtd">
-
-<cref>
-  <header>
-    <copyright>
-      <year>2013</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>erl_driver for Enea OSE</title>
-    <prepared>Lukas Larsson</prepared>
-    <docno></docno>
-    <date>2014-01-08</date>
-    <rev>A</rev>
-    <file>ose_erl_driver.xml</file>
-  </header>
-  <lib>ose_erl_driver</lib>
-  <libsummary>Linked-in drivers in Enea OSE</libsummary>
-  <description>
-    <p>Writing Linked-in drivers that also work on Enea OSE is very similar for
-    how you would do it for Unix. The difference from Unix is that
-    driver_select, ready_input and ready_output all work with signals
-    instead of file descriptors. This means that the driver_select is
-    used to specify which type of signal should trigger calls to
-    ready_input/ready_output. The functions described below are available
-    to driver programmers on Enea OSE to facilitate this.
-    </p>
-  </description>
-  <section>
-    <title>DATA TYPES</title>
-
-    <taglist>
-      <tag><marker id="union_SIGNAL"/>union SIGNAL</tag>
-      <item>See the Enea OSE SPI documentation for a description.</item>
-      <tag><marker id="SIGSELECT"/>SIGSELECT</tag>
-      <item>See the Enea OSE SPI documentation for a description.</item>
-      <tag><marker id="ErlDrvEvent"/>ErlDrvEvent</tag>
-      <item>The <c>ErlDrvEvent</c> is a handle to a signal number and id combination. It is passed to <seealso marker="erts:erl_driver#driver_select">driver_select(3)</seealso>.</item>
-      <tag><marker id="ErlDrvOseEventId"/>ErlDrvOseEventId</tag>
-      <item>This is the id used to associate a specific signal to a
-      certain driver instance. </item>
-    </taglist>
-  </section>
-  <funcs>
-    <func>
-      <name><ret>union SIGNAL *</ret><nametext>erl_drv_ose_get_signal(ErlDrvEvent drv_event)</nametext></name>
-      <desc>
-        <marker id="erl_drv_ose_get_signal"></marker>
-        <p>Fetch the next signal associated with <c>drv_event</c>.
-	Signals will be returned in the order which they were received and
-	when no more signals are available <c>NULL</c> will be returned.
-	Use this function in the ready_input/ready_output callbacks
-	to get signals.</p>
-      </desc>
-    </func>
-    <func>
-      <name><ret>ErlDrvEvent</ret><nametext>erl_drv_ose_event_alloc(SIGSELECT signo, ErlDrvOseEventId id, ErlDrvOseEventId (*resolve_signal)(union SIGNAL* sig), void *extra)</nametext></name>
-      <desc>
-        <marker id="erl_drv_ose_event_alloc"></marker>
-        <p>Create a new <c>ErlDrvEvent</c> associated with <c>signo</c>,
-	<c>id</c> and uses the <c>resolve_signal</c> function to extract
-	the <c>id</c> from a signal with <c>signo</c>. The <c>extra</c>
-	parameter can be used for additional data. See
-	<seealso marker="ose_signals_chapter#driver">
-	Signals in a Linked-in driver</seealso> in the OSE User's Guide.
-      </p>
-      </desc>
-    </func>
-    <func>
-      <name><ret>void</ret><nametext>erl_drv_ose_event_free(ErlDrvEvent drv_event)</nametext></name>
-      <desc>
-        <marker id="erl_drv_ose_event_free"></marker>
-        <p>Free a <c>ErlDrvEvent</c>. This should always be done in the
-	<seealso marker="erts:driver_entry#stop_select">stop_select</seealso>
-	callback when the event is no longer being used.</p>
-      </desc>
-    </func>
-    <func>
-      <name><ret>void</ret><nametext>erl_drv_ose_event_fetch(ErlDrvEvent drv_event, SIGSELECT *signo, ErlDrvOseEventId *id, void **extra)</nametext></name>
-      <desc>
-        <marker id="erl_drv_ose_event_fetch"></marker>
-        <p>Write the signal number, id and any extra data associated with <c>drv_event</c>
-	into <c>*signo</c> and <c>*id</c> respectively. <c>NULL</c> can be
-	also passed as <c>signo</c> or <c>id</c> in order to ignore that field.
-	</p>
-      </desc>
-    </func>
-  </funcs>
-  <section>
-    <title>SEE ALSO</title>
-    <p>
-      <seealso marker="erts:driver_entry">driver_entry(3)</seealso>,
-      <seealso marker="erts:erl_driver">erl_driver(3)</seealso>
-    </p>
-  </section>
-</cref>
diff --git a/lib/ose/doc/src/ose_intro.xml b/lib/ose/doc/src/ose_intro.xml
deleted file mode 100644
index 982516c8bd..0000000000
--- a/lib/ose/doc/src/ose_intro.xml
+++ /dev/null
@@ -1,154 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE chapter SYSTEM "chapter.dtd">
-
-<chapter>
-  <header>
-    <copyright>
-      <year>2013</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>Introduction</title>
-    <prepared>Lukas Larsson</prepared>
-    <docno></docno>
-    <date>2014-01-08</date>
-    <rev>A</rev>
-    <file>ose_intro.xml</file>
-  </header>
-
-  <section>
-    <title>Features</title>
-  </section>
-
-  <section>
-    <title>Starting Erlang/OTP</title>
-    <p>
-      Starting Erlang/OTP on OSE is not as simple as on Unix/Windows (yet).
-      First of all you have to explicitly use the beam (or beam.smp) executables
-      found in erts-X.Y.Z/bin as the load module that you run. This in turn
-      means that you have to supply the raw beam arguments to the emulator
-      when starting. Fortunately <c>erl</c> on Unix/Windows has a
-      undocumented flag called <c>-emu_args_exit</c> that can be used to
-      figure out what the arguments to beam look like. For example:</p>
-      <code># erl +Mut false +A 10 +S 4:4 +Muycs256 +P 2096 +Q 2096 -emu_args_exit
--Mut
-false
--A
-10
--S
-4:4
--Muycs256
--P
-2096
--Q
-2096
---
--root
-/usr/local/lib/erlang
--progname
-erl
---
--home
-/home/erlang
---</code>
-    <p>
-      The arguments are printed on separate lines to make it possible to know
-      what has to be quoted with &quot;. Each line is one quotable unit.
-      So taking the arguments above you can supply them to pm_create or
-      just execute directly on the command line. For example:</p>
-      <code>rtose@acp3400> pm_install erlang /mst/erlang/erts-6.0/bin/beam.smp
-rtose@acp3400> pm_create -c ARGV="-Mut false -A 10 -S 4:4 -Muycs256 -P 2096 -Q 2099 -- -root /mst/erlang -progname erl -- -home /mst/erlang --" erlang
-pid: 0x110059
-rtose@acp3400> pm_start 0x110059</code>
-    <p>
-      Also note that since we are running erl to figure out the arguments on a
-      separate machine the paths have to be updated. In the example above
-      <c>/usr/local/lib/erlang</c> was replaced by <c>/mst/erlang/</c>. The
-      goal is to in future releases not have to do the special argument handling
-      but for now (OTP 17.0) you have to do it.
-    </p>
-    <note>
-      Because of a limitation in the way the OSE handles stdio when starting
-      load modules using pm_install/create the Erlang shell only reads every
-      other command from stdin. However if you start Erlang using run_erl
-      you do not have this problem. So it is highly recommended that you
-      start Erlang using run_erl.
-    </note>
-  </section>
-
-  <section>
-    <title>run_erl and to_erl</title>
-    <p>
-      In OSE run_erl and to_erl are combined into a single load module called
-      run_erl_lm. Installing and starting the load module will add two new
-      shell commands called run_erl and to_erl. They work in exactly the same
-      way as the unix variants of run_erl and to_erl, except that the read
-      and write pipes have to be placed under the /pipe vm. One additional
-      option also exists to run_erl on ose:
-      <taglist>
-	<tag><c>-block Name</c></tag>
-	<item>The name of the install handle and block that will be created/used by
-	installing and exectuting the first part of the command. If nothing
-	if given the basename of the load module will be used for this value.
-	Example:
-	<code>pm_install erlang /path/to/erlang/vm/beam.smp
-run_erl -daemon -block erlang /pipe/ /mst/erlang_logs/ "beam.smp -A 1 -- -root /mst/erlang -- -home /mst --"</code>
-	</item>
-      </taglist>
-      The same argument munching as when starting Erlang/OTP without run_erl
-      has to be done. If <c>-daemon</c> is given then all error printouts
-      are sent to the ramlog.
-      See also
-      <seealso marker="erts:run_erl">run_erl</seealso> for more details.
-    </p>
-    <p>
-      Below is an example of how to get started with <c>run_erl_lm</c>.
-      <code>rtose@acp3400> pm_install run_erl_lm /mst/erlang/erts-6.0/bin/run_erl_lm
-rtose@acp3400> pm_create run_erl_lm
-pid: 0x1c005d
-rtose@acp3400> pm_start 0x1c005d
-rtose@acp3400> mkdir /mst/erlang_log
-rtose@acp3400> run_erl -daemon /pipe/ /mst/erlang_log/ "/mst/erlang/erts-6.0/bin/beam.smp -A 1 -- -root /mst/erlang -- -home /mst --"
-rtose@acp3400> to_erl
-Attaching to /pipe/erlang.pipe.1 (^C to exit)
-os:type().
-{ose,release}
-2>
-'to_erl' terminated.</code>
-      Note that Ctrl-C is used instead of Ctrl-D to exit the to_erl shell.
-    </p>
-  </section>
-
-  <section>
-    <title>epmd</title>
-    <p>
-      In OSE epmd will not be started automatically so if you want to use
-      Erlang distribution you have to manually start epmd.
-    </p>
-  </section>
-
-  <section>
-    <title>VM Process Priorities</title>
-    <p>
-      It is possible to set the priorities you want for the OSE processes that
-      thr emulator creates in the lmconf. An example of how to do it can be
-      found in the default lmconf file in
-      $ERL_TOP/erts/emulator/sys/ose/beam.lmconf.
-    </p>
-  </section>
-
-</chapter>
diff --git a/lib/ose/doc/src/ose_signals_chapter.xml b/lib/ose/doc/src/ose_signals_chapter.xml
deleted file mode 100644
index bcf2259577..0000000000
--- a/lib/ose/doc/src/ose_signals_chapter.xml
+++ /dev/null
@@ -1,240 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE chapter SYSTEM "chapter.dtd">
-
-<chapter>
-  <header>
-    <copyright>
-      <year>2013</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>Interacting with Enea OSE</title>
-    <prepared>Lukas Larsson</prepared>
-    <docno></docno>
-    <date>2014-01-08</date>
-    <rev>A</rev>
-    <file>ose_signals_chapter.xml</file>
-  </header>
-
-  <marker id="introduction"></marker>
-  <section>
-    <title>Introduction</title>
-    <p>The main way which programs on Enea OSE interact is through the
-    usage of message passing, much the same way as Erlang processes
-    communicate. There are two ways in which an Erlang programmer can
-    interact with the signals sent from other Enea OSE processes; either
-    through the provided <c>ose</c> module, or by writing a custom linked-in
-    driver. This User's Guide describes and provides examples for both
-    approaches.
-    </p>
-  </section>
-
-  <marker id="erlang"></marker>
-  <section>
-    <title>Signals in Erlang</title>
-    <p>Erlang/OTP on OSE provides a erlang module called
-    <seealso marker="ose:ose">ose</seealso> that can be used to interact
-    with other OSE processes using message passing. The api in the module
-    is very similar to the native OSE api, so for details of how the
-    functions work please refer to the official OSE documenation. Below
-    is an example usage of the API.
-    </p>
-    <code>1> P1 = ose:open("p1").
-#Port&gt;0.344>
-2> ose:hunt(P1,"p2").
-{#Port&gt;0.344>,1}
-3> P2 = ose:open("p2").
-#Port&gt;0.355>
-4> flush().
-Shell got {mailbox_up,#Port&gt;0.344>,{#Port&gt;0.344>,1},852189}
-ok
-5> ose:listen(P1,[1234]).
-ok
-6> ose:send(P2,ose:get_id(P1),1234,&gt;&gt;"hello">>).
-ok
-7> flush().
-Shell got {message,#Port&gt;0.344>,{852189,1245316,1234,&gt;&gt;"hello">>}}
-ok</code>
-  </section>
-
-  <marker id="driver"></marker>
-  <section>
-    <title>Signals in a Linked-in driver</title>
-    <p>
-      Writing Linked-in drivers for OSE is very similar to how it is done
-      for Unix/Windows. It is only the way in which the driver subscribes
-      and consumed external events that is different. In Unix (and Windows)
-      file descriptiors (and Event Objects) are used to select on. On OSE
-      we use signals to deliver the same functionality. There are two large
-      differences between a signal and an fd.
-    </p>
-    <p>
-      In OSE it is not possible for a signal number to be a unique identifier
-      for a resource in the same way as an fd is. For example; let's say we
-      implement a driver that does an asynchronous hunt that uses signal
-      number 1234 as the hunt_sig. If we want to be able to have multiple
-      hunt ports running at the same time we have to have someway of routing
-      the signal to the correct port. This is achieved by supplying a secondary
-      id that can be retrieved through the meta-data or payload of the signal,
-      e.g:
-      <code>ErlDrvEvent event = erl_drv_ose_event_alloc(1234,port,resolver);</code>
-      The event you get back from
-      <seealso marker="ose_erl_driver#erl_drv_ose_event_alloc">
-      erl_drv_ose_event_alloc</seealso> can then be used by
-      <seealso marker="erts:erl_driver#driver_select">driver_select</seealso>
-      to subscribe to signals. The first argument is just the signal number
-      that we are interested in. The second is the id that we choose to use,
-      in this case the port id that we got in the
-      <seealso marker="erts:driver_entry#start">start</seealso> callback is
-      used. The third argument is a function pointer to a function that can
-      be used to figure out the id from a given signal. The fourth argument can
-      point to any additional data you might want to associate with the event.
-      There is a complete. You can examine the data contained in the event with
-      <seealso marker="ose_erl_driver#erl_drv_ose_event_fetch">erl_drv_ose_event_fetch</seealso>
-      , eg:
-      <code>erl_drv_ose_event_fetch(event, &amp;signal, &amp;port, (void **)&amp;extra);</code>
-      example of what this could look like in
-      <seealso marker="#example">the next section</seealso>.
-      <note>It is very important to issue the driver_select call before
-      any of the signals you are interested in are sent. If driver_select
-      is called after the signal is sent, there is a high probability that it
-      will be lost.</note>
-    </p>
-    <p>
-      The other difference from unix is that in OSE the payload of the event
-      (i.e. the signal data) is already received when the ready_output/input
-      callbacks are called. This means that you access the data of a signal
-      by calling <seealso marker="ose_erl_driver#erl_drv_ose_get_signal">
-      erl_drv_ose_get_signal</seealso>. Additionally multiple signals might be
-      associated with the event, so you should call
-      <seealso marker="ose_erl_driver#erl_drv_ose_get_signal">
-      erl_drv_ose_get_signal</seealso> until <c>NULL</c> is returned.
-    </p>
-  </section>
-
-  <marker id="example"></marker>
-  <section>
-    <title>Example Linked-in driver</title>
-<code>#include "erl_driver.h"
-#include "ose.h"
-
-struct huntsig {
-  SIGSELECT signo;
-  ErlDrvPort port;
-};
-
-union SIGNAL {
-  SIGSELECT signo;
-  struct huntsig;
-}
-
-/* Here we have to get the id from the signal. In this case we use the
-   port id since we have control over the data structure of the signal.
-   It is however possible to use anything in here. The only restriction
-   is that the same id has to be used for all signals of the same number.*/
-ErlDrvOseEventId resolver(union SIGNAL *sig) {
-  return (ErlDrvOseEventId)sig->huntsig.port;
-}
-
-static int drv_init(void) { return 0; };
-
-static ErlDrvData drv_start(ErlDrvPort port, char *command) {
-  return (ErlDrvData)port;
-}
-
-static ErlDrvSSizeT control(ErlDrvData driver_data, unsigned int cmd,
-                            char *buf, ErlDrvSizeT len,
-                            char **rbuf, ErlDrvSizeT rlen) {
-  ErlDrvPort port = (ErlDrvPort)driver_data;
-
-  /* An example of extra data to associate with the event */
-  char *extra_data = driver_alloc(80);
-  snprintf("extra_data, "Event, sig_no: 1234, and port: %d", port);
-
-  /* Create a new event to select on */
-  ErlDrvOseEvent evt = erl_drv_ose_event_alloc(1234,port,resolver, extra_data);
-
-  /* Make sure to do the select call _BEFORE_ the signal arrives.
-     The signal might get lost if the hunt call is done before the
-     select. */
-  driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,1);
-
-  union SIGNAL *sig = alloc(sizeof(union SIGNAL),1234);
-  sig->huntsig.port = port;
-  hunt("testprocess",0,NULL,&amp;sig);
-  return 0;
-}
-
-static void ready_input(ErlDrvData driver_data, ErlDrvEvent evt) {
-  char *extra_data;
-  /* Get the first signal payload from the event */
-  union SIGNAL *sig = erl_drv_ose_get_signal(evt);
-  ErlDrvPort port = (ErlDrvPort)driver_data;
-  while (sig != NULL) {
-    if (sig->signo == 1234) {
-      /* Print out the string we added as the extra parameter */
-      erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&amp;extra_data);
-      printf("We've received: %s\n", extra_data);
-
-      /* If it is our signal we send a message with the sender of the signal
-         to the controlling erlang process */
-      ErlDrvTermData reply[] = { ERL_DRV_UINT, (ErlDrvUInt)sender(&amp;sig) };
-      erl_drv_send_term(port,reply,sizeof(reply) / sizeof(reply[0]));
-    }
-
-    /* Cleanup the signal and deselect on the event.
-       Note that the event itself has to be free'd in the stop_select
-       callback. */
-    free_buf(&amp;sig);
-    driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,0);
-
-    /* There could be more than one signal waiting in this event, so
-       we have to loop until sig == NULL */
-    sig = erl_drv_ose_get_signal(evt);
-  }
-}
-
-static void stop_select(ErlDrvEvent event, void *reserved)
-{
-  /* Free the extra_data */
-  erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&amp;extra_data);
-  driver_free(extra_data);
-
-  /* Free the event itself */
-  erl_drv_ose_event_free(event);
-}
-
-/**
- * Setup the driver entry for the Erlang runtime
- **/
-ErlDrvEntry ose_signal_driver_entry = {
-  .init                         = drv_init,
-  .start                        = drv_start,
-  .stop                         = drv_stop,
-  .ready_input                  = ready_input,
-  .driver_name                  = DRIVER_NAME,
-  .control                      = control,
-  .extended_marker              = ERL_DRV_EXTENDED_MARKER,
-  .major_version                = ERL_DRV_EXTENDED_MAJOR_VERSION,
-  .minor_version                = ERL_DRV_EXTENDED_MINOR_VERSION,
-  .driver_flags                 = ERL_DRV_FLAG_USE_PORT_LOCKING,
-  .stop_select                  = stop_select
-};
-</code>
-  </section>
-
-</chapter>
diff --git a/lib/ose/doc/src/part.xml b/lib/ose/doc/src/part.xml
deleted file mode 100644
index 0c9ebd16c0..0000000000
--- a/lib/ose/doc/src/part.xml
+++ /dev/null
@@ -1,39 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE part SYSTEM "part.dtd">
-
-<part xmlns:xi="http://www.w3.org/2001/XInclude">
-  <header>
-    <copyright>
-      <year>2014</year>
-      <year>2014</year>
-      <holder>Ericsson AB, All Rights Reserved</holder>
-    </copyright>
-    <legalnotice>
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
- 
-      http://www.apache.org/licenses/LICENSE-2.0
-
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-
-  The Initial Developer of the Original Code is Ericsson AB.
-    </legalnotice>
-
-    <title>OSE User's Guide</title>
-    <prepared>Lukas Larsson</prepared>
-    <docno></docno>
-    <date>2014-01-08</date>
-    <rev>1.0</rev>
-    <file>part.xml</file>
-  </header>
-  <description>
-    <p><em>OSE</em>.</p>
-  </description>
-  <xi:include href="ose_intro.xml"/>
-  <xi:include href="ose_signals_chapter.xml"/>
-</part>
diff --git a/lib/ose/doc/src/ref_man.xml b/lib/ose/doc/src/ref_man.xml
deleted file mode 100644
index 964e5ab8ff..0000000000
--- a/lib/ose/doc/src/ref_man.xml
+++ /dev/null
@@ -1,40 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE application SYSTEM "application.dtd">
-
-<application xmlns:xi="http://www.w3.org/2001/XInclude">
-  <header>
-    <copyright>
-      <year>2014</year><year>2014</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>OSE Reference Manual</title>
-    <prepared>Lukas Larsson</prepared>
-    <docno></docno>
-    <date>2014-01-08</date>
-    <rev>1.0</rev>
-    <file>ref_man.xml</file>
-  </header>
-  <description>
-    <p>The Standard Erlang Libraries application, <em>STDLIB</em>,
-      contains modules for manipulating lists, strings and files etc.</p>
-    <br></br>
-  </description>
-  <xi:include href="ose_app.xml"/>
-  <xi:include href="ose.xml"/>
-  <xi:include href="ose_erl_driver.xml"/>
-</application>