The R13B03 release.OTP_R13B03

1 files changed, 201 insertions, 0 deletions

diff --git a/lib/snmp/doc/src/snmp_view_based_acm_mib.xml b/lib/snmp/doc/src/snmp_view_based_acm_mib.xml
new file mode 100644
index 0000000000..ffea256608
--- /dev/null
+++ b/lib/snmp/doc/src/snmp_view_based_acm_mib.xml
@@ -0,0 +1,201 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE erlref SYSTEM "erlref.dtd">
+
+<erlref>
+  <header>
+    <copyright>
+      <year>1999</year><year>2009</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+    
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+    
+    </legalnotice>
+
+    <title>snmp_view_based_acm_mib</title>
+    <prepared></prepared>
+    <responsible></responsible>
+    <docno></docno>
+    <approved></approved>
+    <checked></checked>
+    <date></date>
+    <rev></rev>
+    <file>snmp_view_based_acm_mib.xml</file>
+  </header>
+  <module>snmp_view_based_acm_mib</module>
+  <modulesummary>Instrumentation Functions for SNMP-VIEW-BASED-ACM-MIB</modulesummary>
+  <description>
+    <p>The module <c>snmp_view_based_acm_mib</c> implements the instrumentation functions for the
+      SNMP-VIEW-BASED-ACM-MIB, and functions for configuring the database.
+      </p>
+    <p>The configuration files are described in the SNMP User's Manual.</p>
+  </description>
+  <funcs>
+    <func>
+      <name>configure(ConfDir) -> void()</name>
+      <fsummary>Configure the SNMP-VIEW-BASED-ACM-MIB</fsummary>
+      <type>
+        <v>ConfDir = string()</v>
+      </type>
+      <desc>
+        <p>This function is called from the supervisor at system
+          start-up.
+          </p>
+        <p>Inserts all data in the configuration files into the
+          database and destroys all old rows with StorageType
+          <c>volatile</c>.  The rows created from the configuration file
+          will have StorageType <c>nonVolatile</c>.
+          </p>
+        <p>All <c>snmp</c> counters are set to zero.
+          </p>
+        <p>If an error is found in the configuration file, it is
+          reported using the function <c>config_err/2</c> of the error
+          report module, and the function fails with the reason 
+          <c>configuration_error</c>.
+          </p>
+        <p><c>ConfDir</c> is a string which points to the directory
+          where the configuration files are found.
+          </p>
+        <p>The configuration file read is: <c>vacm.conf</c>.
+          </p>
+      </desc>
+    </func>
+    <func>
+      <name>reconfigure(ConfDir) -> void()</name>
+      <fsummary>Configure the SNMP-VIEW-BASED-ACM-MIB</fsummary>
+      <type>
+        <v>ConfDir = string()</v>
+      </type>
+      <desc>
+        <p>Inserts all data in the configuration files into the
+          database and destroys all old data, including the rows with
+          StorageType <c>nonVolatile</c>.  The rows created from the
+          configuration file will have StorageType <c>nonVolatile</c>.
+          </p>
+        <p>Thus, the data in the SNMP-VIEW-BASED-ACM-MIB, after this
+          function has been called, is the data from the configuration
+          files.
+          </p>
+        <p>All <c>snmp</c> counters are set to zero.
+          </p>
+        <p>If an error is found in the configuration file, it is
+          reported using the function <c>config_err/2</c> of the error
+          report module, and the function fails with the reason 
+          <c>configuration_error</c>.
+          </p>
+        <p><c>ConfDir</c> is a string which points to the directory
+          where the configuration files are found.
+          </p>
+        <p>The configuration file read is: <c>vacm.conf</c>.
+                    <marker id="add_sec2group"></marker>
+</p>
+      </desc>
+    </func>
+    <func>
+      <name>add_sec2group(SecModel, SecName, GroupName) -> Ret</name>
+      <fsummary>Add one security to group definition</fsummary>
+      <type>
+        <v>SecModel = v1 | v2c | usm</v>
+        <v>SecName = string()</v>
+        <v>GroupName = string()</v>
+        <v>Ret = {ok, Key} | {error, Reason}</v>
+        <v>Key = term()</v>
+        <v>Reason = term()</v>
+      </type>
+      <desc>
+        <p>Adds a security to group definition to the agent config. 
+          Equivalent to one vacmSecurityToGroup-line in the <c>vacm.conf</c> file.</p>
+        <marker id="delete_sec2group"></marker>
+      </desc>
+    </func>
+    <func>
+      <name>delete_sec2group(Key) -> Ret</name>
+      <fsummary>Delete one security to group definition</fsummary>
+      <type>
+        <v>Key = term()</v>
+        <v>Ret = ok | {error, Reason}</v>
+        <v>Reason = term()</v>
+      </type>
+      <desc>
+        <p>Delete a security to group definition from the agent config.</p>
+        <marker id="add_access"></marker>
+      </desc>
+    </func>
+    <func>
+      <name>add_access(GroupName, Prefix, SecModel, SecLevel, Match, RV, WV, NV) -> Ret</name>
+      <fsummary>Add one access definition</fsummary>
+      <type>
+        <v>GroupName = string()</v>
+        <v>Prefix = string()</v>
+        <v>SecModel = v1 | v2c | usm</v>
+        <v>SecLevel = string()</v>
+        <v>Match = prefix | exact</v>
+        <v>RV = string()</v>
+        <v>WV = string()</v>
+        <v>NV = string()</v>
+        <v>Ret = {ok, Key} | {error, Reason}</v>
+        <v>Key = term()</v>
+        <v>Reason = term()</v>
+      </type>
+      <desc>
+        <p>Adds a access definition to the agent config. 
+          Equivalent to one vacmAccess-line in the <c>vacm.conf</c> file.</p>
+        <marker id="delete_access"></marker>
+      </desc>
+    </func>
+    <func>
+      <name>delete_access(Key) -> Ret</name>
+      <fsummary>Delete one access definition</fsummary>
+      <type>
+        <v>Key = term()</v>
+        <v>Ret = ok | {error, Reason}</v>
+        <v>Reason = term()</v>
+      </type>
+      <desc>
+        <p>Delete a access definition from the agent config.</p>
+        <marker id="add_view_tree_fam"></marker>
+      </desc>
+    </func>
+    <func>
+      <name>add_view_tree_fam(ViewIndex, SubTree, Status, Mask) -> Ret</name>
+      <fsummary>Add one view tree family definition</fsummary>
+      <type>
+        <v>ViewIndex = integer()</v>
+        <v>SubTree = oid()</v>
+        <v>Status = included | excluded</v>
+        <v>Mask = null | [integer()], where all values are either 0 or 1</v>
+        <v>Ret = {ok, Key} | {error, Reason}</v>
+        <v>Key = term()</v>
+        <v>Reason = term()</v>
+      </type>
+      <desc>
+        <p>Adds a view tree family definition to the agent config. 
+          Equivalent to one vacmViewTreeFamily-line in the <c>vacm.conf</c> file.</p>
+        <marker id="delete_view_tree_fam"></marker>
+      </desc>
+    </func>
+    <func>
+      <name>delete_view_tree_fam(Key) -> Ret</name>
+      <fsummary>Delete one view tree family definition</fsummary>
+      <type>
+        <v>Key = term()</v>
+        <v>Ret = ok | {error, Reason}</v>
+        <v>Reason = term()</v>
+      </type>
+      <desc>
+        <p>Delete a view tree family definition from the agent config.</p>
+      </desc>
+    </func>
+  </funcs>
+  
+</erlref>
+