aboutsummaryrefslogtreecommitdiffstats
path: root/lib/snmp/test/test-mibs/RMON2-MIB.mib
diff options
context:
space:
mode:
authorErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
committerErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
commit84adefa331c4159d432d22840663c38f155cd4c1 (patch)
treebff9a9c66adda4df2106dfd0e5c053ab182a12bd /lib/snmp/test/test-mibs/RMON2-MIB.mib
downloadotp-84adefa331c4159d432d22840663c38f155cd4c1.tar.gz
otp-84adefa331c4159d432d22840663c38f155cd4c1.tar.bz2
otp-84adefa331c4159d432d22840663c38f155cd4c1.zip
The R13B03 release.OTP_R13B03
Diffstat (limited to 'lib/snmp/test/test-mibs/RMON2-MIB.mib')
-rw-r--r--lib/snmp/test/test-mibs/RMON2-MIB.mib5450
1 files changed, 5450 insertions, 0 deletions
diff --git a/lib/snmp/test/test-mibs/RMON2-MIB.mib b/lib/snmp/test/test-mibs/RMON2-MIB.mib
new file mode 100644
index 0000000000..827bb38ff9
--- /dev/null
+++ b/lib/snmp/test/test-mibs/RMON2-MIB.mib
@@ -0,0 +1,5450 @@
+RMON2-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
+ Gauge32, IpAddress, TimeTicks FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, RowStatus, DisplayString, TimeStamp
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+ mib-2, ifIndex FROM RFC1213-MIB
+ OwnerString, statistics, history, hosts,
+ matrix, filter, etherStatsEntry, historyControlEntry,
+ hostControlEntry, matrixControlEntry, filterEntry,
+ channelEntry FROM RMON-MIB
+ tokenRing, tokenRingMLStatsEntry, tokenRingPStatsEntry,
+ ringStationControlEntry, sourceRoutingStatsEntry
+ FROM TOKEN-RING-RMON-MIB;
+-- Remote Network Monitoring MIB
+
+rmon MODULE-IDENTITY
+ LAST-UPDATED "9605270000Z"
+ ORGANIZATION "IETF RMON MIB Working Group"
+ CONTACT-INFO
+ "Steve Waldbusser (WG Editor)
+ Postal: International Network Services
+ 650 Castro Street, Suite 260
+ Mountain View, CA 94041
+ Phone: +1 415 254 4251
+
+
+ Andy Bierman (WG Chair)
+ Phone: +1 805 648 2028
+ DESCRIPTION
+ "The MIB module for managing remote monitoring
+ device implementations. This MIB module
+ augments the original RMON MIB as specified in
+ RFC 1757."
+ ::= { mib-2 16 }
+
+-- { rmon 1 } through { rmon 10 } are defined in RMON and
+-- the Token Ring RMON MIB [RFC 1513]
+
+ protocolDir OBJECT IDENTIFIER ::= { rmon 11 }
+ protocolDist OBJECT IDENTIFIER ::= { rmon 12 }
+ addressMap OBJECT IDENTIFIER ::= { rmon 13 }
+ nlHost OBJECT IDENTIFIER ::= { rmon 14 }
+ nlMatrix OBJECT IDENTIFIER ::= { rmon 15 }
+ alHost OBJECT IDENTIFIER ::= { rmon 16 }
+ alMatrix OBJECT IDENTIFIER ::= { rmon 17 }
+ usrHistory OBJECT IDENTIFIER ::= { rmon 18 }
+ probeConfig OBJECT IDENTIFIER ::= { rmon 19 }
+ rmonConformance OBJECT IDENTIFIER ::= { rmon 20 }
+
+-- Textual Conventions
+
+ZeroBasedCounter32 ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This TC describes an object which counts events with the
+ following semantics: objects of this type will be set to
+ zero(0) on creation and will thereafter count appropriate
+ events, wrapping back to zero(0) when the value 2^32 is
+ reached.
+
+ Provided that an application discovers the new object within
+ the minimum time to wrap it can use the initial value as a
+ delta since it last polled the table of which this object is
+ part. It is important for a management station to be aware of
+ this minimum time and the actual time between polls, and to
+ discard data if the actual time is too long or there is no
+ defined minimum time.
+
+ Typically this TC is used in tables where the INDEX space is
+ constantly changing and/or the TimeFilter mechanism is in use."
+ SYNTAX Gauge32
+
+LastCreateTime ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This TC describes an object that stores the last time its
+ entry was created.
+
+ This can be used for polling applications to determine that an
+ entry has been deleted and re-created between polls, causing
+ an otherwise undetectable discontinuity in the data."
+ SYNTAX TimeStamp
+
+TimeFilter ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+
+
+
+ "To be used for the index to a table. Allows an application
+ to download only those rows changed since a particular time.
+ A row is considered changed if the value of any object in the
+ row changes or if the row is created or deleted.
+
+ When sysUpTime is equal to zero, this table shall be empty.
+
+ One entry exists for each past value of sysUpTime, except that
+ the whole table is purged should sysUpTime wrap.
+
+ As this basic row is updated new conceptual rows are created
+ (which still share the now updated object values with all
+ other instances). The number of instances which are created
+ is determined by the value of sysUpTime at which the basic row
+ was last updated. One instance will exist for each value of
+ sysUpTime at the last update time for the row. A new
+ timeMark instance is created for each new sysUpTime value.
+ Each new conceptual row will be associated with the timeMark
+ instance which was created at the value of sysUpTime with
+ which the conceptual row is to be associated.
+
+ By definition all conceptual rows were updated at or after
+ time zero and so at least one conceptual row (associated with
+ timeMark.0) must exist for each underlying (basic) row.
+
+ See the appendix for further discussion of this variable.
+
+ Consider the following fooTable:
+
+ fooTable ...
+ INDEX { fooTimeMark, fooIndex }
+
+ FooEntry {
+ fooTimeMark TimeFilter
+ fooIndex INTEGER,
+ fooCounts Counter
+ }
+
+ Should there be two basic rows in this table (fooIndex == 1,
+ fooIndex == 2) and row 1 was updated most recently at time 6,
+ while row 2 was updated most recently at time 8, and both rows
+ had been updated on several earlier occasions such that the
+ current values were 5 and 9 respectively then the following
+ fooCounts instances would exist.
+
+ fooCounts.0.1 5
+ fooCounts.0.2 9
+ fooCounts.1.1 5
+
+ fooCounts.1.2 9
+ fooCounts.2.1 5
+ fooCounts.2.2 9
+ fooCounts.3.1 5
+ fooCounts.3.2 9
+ fooCounts.4.1 5
+ fooCounts.4.2 9
+ fooCounts.5.1 5
+ fooCounts.5.2 9
+ fooCounts.6.1 5
+ fooCounts.6.2 9
+ fooCounts.7.2 9 -- note that row 1 doesn't exist for
+ fooCounts.8.2 9 -- times 7 and 8"
+ SYNTAX TimeTicks
+
+DataSource ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Identifies the source of the data that the associated
+ function is configured to analyze. This source can be any
+ interface on this device.
+
+ In order to identify a particular interface, this
+ object shall identify the instance of the ifIndex
+ object, defined in [3,5], for the desired interface.
+
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1."
+ SYNTAX OBJECT IDENTIFIER
+--
+-- Protocol Directory Group
+--
+-- Lists the inventory of protocols the probe has the capability of
+-- monitoring and allows the addition, deletion, and configuration of
+-- entries in this list.
+
+protocolDirLastChange OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time the protocol directory
+ was last modified, either through insertions or deletions,
+ or through modifications of either the
+ protocolDirAddressMapConfig, protocolDirHostConfig, or
+ protocolDirMatrixConfig."
+ ::= { protocolDir 1 }
+
+protocolDirTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ProtocolDirEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table lists the protocols that this agent has the
+ capability to decode and count. There is one entry in this
+ table for each such protocol. These protocols represent
+ different network layer, transport layer, and higher-layer
+ protocols. The agent should boot up with this table
+ preconfigured with those protocols that it knows about and
+ wishes to monitor. Implementations are strongly encouraged to
+ support protocols higher than the network layer (at least for
+ the protocol distribution group), even for implementations
+ that don't support the application layer groups."
+ ::= { protocolDir 2 }
+
+protocolDirEntry OBJECT-TYPE
+ SYNTAX ProtocolDirEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the protocolDirTable.
+
+ An example of the indexing of this entry is
+ protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the
+ encoding of a length of 8, followed by 8 subids encoding the
+ protocolDirID of 1.2048, followed by a length of 2 and the
+ 2 subids encoding zero-valued parameters."
+ INDEX { protocolDirID, protocolDirParameters }
+ ::= { protocolDirTable 1 }
+
+ProtocolDirEntry ::= SEQUENCE {
+ protocolDirID OCTET STRING,
+ protocolDirParameters OCTET STRING,
+ protocolDirLocalIndex Integer32,
+ protocolDirDescr DisplayString,
+ protocolDirType BITS,
+ protocolDirAddressMapConfig INTEGER,
+ protocolDirHostConfig INTEGER,
+ protocolDirMatrixConfig INTEGER,
+ protocolDirOwner OwnerString,
+ protocolDirStatus RowStatus
+}
+
+protocolDirID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS not-accessible
+
+ STATUS current
+ DESCRIPTION
+ "A unique identifier for a particular protocol. Standard
+ identifiers will be defined in a manner such that they
+ can often be used as specifications for new protocols - i.e.
+ a tree-structured assignment mechanism that matches the
+ protocol encapsulation `tree' and which has algorithmic
+ assignment mechanisms for certain subtrees. See RFC XXX for
+ more details.
+
+ Despite the algorithmic mechanism, the probe will only place
+ entries in here for those protocols it chooses to collect. In
+ other words, it need not populate this table with all of the
+ possible ethernet protocol types, nor need it create them on
+ the fly when it sees them. Whether or not it does these
+ things is a matter of product definition (cost/benefit,
+ usability), and is up to the designer of the product.
+
+ If an entry is written to this table with a protocolDirID that
+ the agent doesn't understand, either directly or
+ algorithmically, the SET request will be rejected with an
+ inconsistentName or badValue (for SNMPv1) error."
+ ::= { protocolDirEntry 1 }
+
+protocolDirParameters OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters for the associated protocolDirID.
+ See the associated RMON2 Protocol Identifiers document
+ for a description of the possible parameters. There
+ will be one octet in this string for each sub-identifier in
+ the protocolDirID, and the parameters will appear here in the
+ same order as the associated sub-identifiers appear in the
+ protocolDirID.
+
+ Every node in the protocolDirID tree has a different, optional
+ set of parameters defined (that is, the definition of
+ parameters for a node is optional). The proper parameter
+ value for each node is included in this string. Note that the
+ inclusion of a parameter value in this string for each node is
+ not optional - what is optional is that a node may have no
+ parameters defined, in which case the parameter field for that
+ node will be zero."
+ ::= { protocolDirEntry 2 }
+
+protocolDirLocalIndex OBJECT-TYPE
+
+
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The locally arbitrary, but unique identifier associated
+ with this protocolDir entry.
+
+ The value for each supported protocol must remain constant at
+ least from one re-initialization of the entity's network
+ management system to the next re-initialization, except that
+ if a protocol is deleted and re-created, it must be re-created
+ with a new value that has not been used since the last
+ re-initialization.
+
+ The specific value is meaningful only within a given SNMP
+ entity. A protocolDirLocalIndex must not be re-used until the
+ next agent-restart in the event the protocol directory entry
+ is deleted."
+ ::= { protocolDirEntry 3 }
+
+protocolDirDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A textual description of the protocol encapsulation.
+ A probe may choose to describe only a subset of the
+ entire encapsulation (e.g. only the highest layer).
+
+ This object is intended for human consumption only.
+
+ This object may not be modified if the associated
+ protocolDirStatus object is equal to active(1)."
+ ::= { protocolDirEntry 4 }
+
+protocolDirType OBJECT-TYPE
+ SYNTAX BITS {
+ extensible(0),
+ addressRecognitionCapable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object describes 2 attributes of this protocol
+ directory entry.
+
+ The presence or absence of the `extensible' bit describes
+ whether or not this protocol directory entry can be extended
+
+
+ by the user by creating protocol directory entries which are
+ children of this protocol.
+
+ An example of an entry that will often allow extensibility is
+ `ip.udp'. The probe may automatically populate some children
+ of this node such as `ip.udp.snmp' and `ip.udp.dns'.
+ A probe administrator or user may also populate additional
+ children via remote SNMP requests that create entries in this
+ table. When a child node is added for a protocol for which the
+ probe has no built in support, extending a parent node (for
+ which the probe does have built in support),
+ that child node is not extendible. This is termed `limited
+ extensibility'.
+
+ When a child node is added through this extensibility
+ mechanism, the values of protocolDirLocalIndex and
+ protocolDirType shall be assigned by the agent.
+
+ The other objects in the entry will be assigned by the
+ manager who is creating the new entry.
+
+ This object also describes whether or not this agent can
+ recognize addresses for this protocol, should it be a network
+ level protocol. That is, while a probe may be able to
+ recognize packets of a particular network layer protocol and
+ count them, it takes additional logic to be able to recognize
+ the addresses in this protocol and to populate network layer
+ or application layer tables with the addresses in this
+ protocol. If this bit is set, the agent will recognize
+ network layer addresses for this protoocl and populate the
+ network and application layer host and matrix tables with
+ these protocols.
+
+ Note that when an entry is created, the agent will supply
+ values for the bits that match the capabilities of the agent
+ with respect to this protocol. Note that since row creations
+ usually exercise the limited extensibility feature, these
+ bits will usually be set to zero."
+ ::= { protocolDirEntry 5 }
+
+protocolDirAddressMapConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSupported(1),
+ supportedOff(2),
+ supportedOn(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+
+
+ DESCRIPTION
+ "This object describes and configures the probe's support for
+ address mapping for this protocol. When the probe creates
+ entries in this table for all protocols that it understands,
+ it will set the entry to notSupported(1) if it doesn't have
+ the capability to perform address mapping for the protocol or
+ if this protocol is not a network-layer protocol. When
+ an entry is created in this table by a management operation as
+ part of the limited extensibility feature, the probe must set
+ this value to notSupported(1), because limited extensibility
+ of the protocolDirTable does not extend to interpreting
+ addresses of the extended protocols.
+
+ If the value of this object is notSupported(1), the probe
+ will not perform address mapping for this protocol and
+ shall not allow this object to be changed to any other value.
+ If the value of this object is supportedOn(3), the probe
+ supports address mapping for this protocol and is configured
+ to perform address mapping for this protocol for all
+ addressMappingControlEntries and all interfaces.
+ If the value of this object is supportedOff(2), the probe
+ supports address mapping for this protocol but is configured
+ to not perform address mapping for this protocol for any
+ addressMappingControlEntries and all interfaces.
+ Whenever this value changes from supportedOn(3) to
+ supportedOff(2), the probe shall delete all related entries in
+ the addressMappingTable."
+ ::= { protocolDirEntry 6 }
+
+protocolDirHostConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSupported(1),
+ supportedOff(2),
+ supportedOn(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes and configures the probe's support for
+ the network layer and application layer host tables for this
+ protocol. When the probe creates entries in this table for
+ all protocols that it understands, it will set the entry to
+ notSupported(1) if it doesn't have the capability to track the
+ nlHostTable for this protocol or if the alHostTable is
+ implemented but doesn't have the capability to track this
+ protocol. Note that if the alHostTable is implemented, the
+ probe may only support a protocol if it is supported in both
+ the nlHostTable and the alHostTable.
+
+
+
+ If the associated protocolDirType object has the
+ addressRecognitionCapable bit set, then this is a network
+ layer protocol for which the probe recognizes addresses, and
+ thus the probe will populate the nlHostTable and alHostTable
+ with addresses it discovers for this protocol.
+
+ If the value of this object is notSupported(1), the probe
+ will not track the nlHostTable or alHostTable for this
+ protocol and shall not allow this object to be changed to any
+ other value. If the value of this object is supportedOn(3),
+ the probe supports tracking of the nlHostTable and alHostTable
+ for this protocol and is configured to track both tables
+ for this protocol for all control entries and all interfaces.
+ If the value of this object is supportedOff(2), the probe
+ supports tracking of the nlHostTable and alHostTable for this
+ protocol but is configured to not track these tables
+ for any control entries or interfaces.
+ Whenever this value changes from supportedOn(3) to
+ supportedOff(2), the probe shall delete all related entries in
+ the nlHostTable and alHostTable.
+
+ Note that since each alHostEntry references 2 protocol
+ directory entries, one for the network address and one for the
+ type of the highest protocol recognized, that an entry will
+ only be created in that table if this value is supportedOn(3)
+ for both protocols."
+ ::= { protocolDirEntry 7 }
+
+protocolDirMatrixConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSupported(1),
+ supportedOff(2),
+ supportedOn(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes and configures the probe's support for
+ the network layer and application layer matrix tables for this
+ protocol. When the probe creates entries in this table for
+ all protocols that it understands, it will set the entry to
+ notSupported(1) if it doesn't have the capability to track the
+ nlMatrixTables for this protocol or if the alMatrixTables are
+ implemented but don't have the capability to track this
+ protocol. Note that if the alMatrix tables are implemented,
+ the probe may only support a protocol if it is supported in
+ the the both of the nlMatrixTables and both of the
+ alMatrixTables.
+
+ If the associated protocolDirType object has the
+ addressRecognitionCapable bit set, then this is a network
+ layer protocol for which the probe recognizes addresses, and
+ thus the probe will populate both of the nlMatrixTables and
+ both of the alMatrixTables with addresses it discovers for
+ this protocol.
+
+ If the value of this object is notSupported(1), the probe
+ will not track either of the nlMatrixTables or the
+ alMatrixTables for this protocol and shall not allow this
+ object to be changed to any other value. If the value of this
+ object is supportedOn(3), the probe supports tracking of both
+ of the nlMatrixTables and (if implemented) both of the
+ alMatrixTables for this protocol and is configured to track
+ these tables for this protocol for all control entries and all
+ interfaces. If the value of this object is supportedOff(2),
+ the probe supports tracking of both of the nlMatrixTables and
+ (if implemented) both of the alMatrixTables for this protocol
+ but is configured to not track these tables for this
+ protocol for any control entries or interfaces.
+ Whenever this value changes from supportedOn(3) to
+ supportedOff(2), the probe shall delete all related entries in
+ the nlMatrixTables and the alMatrixTables.
+
+ Note that since each alMatrixEntry references 2 protocol
+ directory entries, one for the network address and one for the
+ type of the highest protocol recognized, that an entry will
+ only be created in that table if this value is supportedOn(3)
+ for both protocols."
+ ::= { protocolDirEntry 8 }
+
+protocolDirOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { protocolDirEntry 9 }
+
+protocolDirStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this protocol directory entry.
+
+ An entry may not exist in the active state unless all
+
+
+ objects in the entry have an appropriate value.
+
+ If this object is not equal to active(1), all associated
+ entries in the nlHostTable, nlMatrixSDTable, nlMatrixDSTable,
+ alHostTable, alMatrixSDTable, and alMatrixDSTable shall be
+ deleted."
+ ::= { protocolDirEntry 10 }
+
+--
+-- Protocol Distribution Group (protocolDist)
+--
+-- Collects the relative amounts of octets and packets for the
+-- different protocols detected on a network segment.
+-- protocolDistControlTable,
+-- protocolDistStatsTable
+
+protocolDistControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ProtocolDistControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Controls the setup of protocol type distribution statistics
+ tables.
+
+ Implementations are encouraged to add an entry per monitored
+ interface upon initialization so that a default collection
+ of protocol statistics is available.
+
+ Rationale:
+ This table controls collection of very basic statistics
+ for any or all of the protocols detected on a given interface.
+ An NMS can use this table to quickly determine bandwidth
+ allocation utilized by different protocols.
+
+ A media-specific statistics collection could also
+ be configured (e.g. etherStats, trPStats) to easily obtain
+ total frame, octet, and droppedEvents for the same
+ interface."
+ ::= { protocolDist 1 }
+
+protocolDistControlEntry OBJECT-TYPE
+ SYNTAX ProtocolDistControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the protocolDistControlTable.
+
+ An example of the indexing of this entry is
+
+
+ protocolDistControlDroppedFrames.7"
+ INDEX { protocolDistControlIndex }
+ ::= { protocolDistControlTable 1 }
+
+ProtocolDistControlEntry ::= SEQUENCE {
+ protocolDistControlIndex Integer32,
+ protocolDistControlDataSource DataSource,
+ protocolDistControlDroppedFrames Counter32,
+ protocolDistControlCreateTime LastCreateTime,
+ protocolDistControlOwner OwnerString,
+ protocolDistControlStatus RowStatus
+}
+
+protocolDistControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique index for this protocolDistControlEntry."
+ ::= { protocolDistControlEntry 1 }
+
+protocolDistControlDataSource OBJECT-TYPE
+ SYNTAX DataSource
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The source of data for the this protocol distribution.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the
+ identified interface.
+
+ This object may not be modified if the associated
+ protocolDistControlStatus object is equal to active(1)."
+ ::= { protocolDistControlEntry 2 }
+
+protocolDistControlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { protocolDistControlEntry 3 }
+
+protocolDistControlCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last
+ activated. This can be used by the management station to
+ ensure that the table has not been deleted and recreated
+ between polls."
+ ::= { protocolDistControlEntry 4 }
+
+protocolDistControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { protocolDistControlEntry 5 }
+
+protocolDistControlStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this row.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value.
+
+ If this object is not equal to active(1), all associated
+ entries in the protocolDistStatsTable shall be deleted."
+ ::= { protocolDistControlEntry 6 }
+
+-- per interface protocol distribution statistics table
+protocolDistStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ProtocolDistStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is made in this table for every protocol in the
+
+
+ protocolDirTable which has been seen in at least one packet.
+ Counters are updated in this table for every protocol type
+ that is encountered when parsing a packet, but no counters are
+ updated for packets with MAC-layer errors.
+
+ Note that if a protocolDirEntry is deleted, all associated
+ entries in this table are removed."
+ ::= { protocolDist 2 }
+
+protocolDistStatsEntry OBJECT-TYPE
+ SYNTAX ProtocolDistStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the protocolDistStatsTable.
+
+ The index is composed of the protocolDistControlIndex of the
+ associated protocolDistControlEntry followed by the
+ protocolDirLocalIndex of the associated protocol that this
+ entry represents. In other words, the index identifies the
+ protocol distribution an entry is a part of as well as the
+ particular protocol that it represents.
+
+ An example of the indexing of this entry is
+ protocolDistStatsPkts.1.18"
+ INDEX { protocolDistControlIndex, protocolDirLocalIndex }
+ ::= { protocolDistStatsTable 1 }
+
+ProtocolDistStatsEntry ::= SEQUENCE {
+ protocolDistStatsPkts ZeroBasedCounter32,
+ protocolDistStatsOctets ZeroBasedCounter32
+}
+
+protocolDistStatsPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets without errors received of this
+ protocol type. Note that this is the number of link-layer
+ packets, so if a single network-layer packet is fragmented
+ into several link-layer frames, this counter is incremented
+ several times."
+ ::= { protocolDistStatsEntry 1 }
+
+protocolDistStatsOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets in packets received of this protocol
+ type since it was added to the protocolDistStatsTable
+ (excluding framing bits but including FCS octets), except for
+ those octets in packets that contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { protocolDistStatsEntry 2 }
+
+--
+-- Address Map Group (addressMap)
+--
+-- Lists MAC address to network address bindings discovered by the
+-- probe and what interface they were last seen on.
+-- addressMapControlTable
+-- addressMapTable
+
+addressMapInserts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an address mapping entry has been
+ inserted into the addressMapTable. If an entry is inserted,
+ then deleted, and then inserted, this counter will be
+ incremented by 2.
+
+ Note that the table size can be determined by subtracting
+ addressMapDeletes from addressMapInserts."
+ ::= { addressMap 1 }
+
+addressMapDeletes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an address mapping entry has been
+ deleted from the addressMapTable (for any reason). If
+ an entry is deleted, then inserted, and then deleted, this
+ counter will be incremented by 2.
+
+ Note that the table size can be determined by subtracting
+ addressMapDeletes from addressMapInserts."
+ ::= { addressMap 2 }
+
+
+
+
+addressMapMaxDesiredEntries OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of entries that are desired in the
+ addressMapTable. The probe will not create more than
+ this number of entries in the table, but may choose to create
+ fewer entries in this table for any reason including the lack
+ of resources.
+
+ If this object is set to a value less than the current number
+ of entries, enough entries are chosen in an
+ implementation-dependent manner and deleted so that the number
+ of entries in the table equals the value of this object.
+
+ If this value is set to -1, the probe may create any number
+ of entries in this table.
+
+ This object may be used to control how resources are allocated
+ on the probe for the various RMON functions."
+ ::= { addressMap 3 }
+
+addressMapControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AddressMapControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table to control the collection of network layer address to
+ physical address to interface mappings.
+
+ Note that this is not like the typical RMON
+ controlTable and dataTable in which each entry creates
+ its own data table. Each entry in this table enables the
+ discovery of addresses on a new interface and the placement
+ of address mappings into the central addressMapTable.
+
+ Implementations are encouraged to add an entry per monitored
+ interface upon initialization so that a default collection
+ of address mappings is available."
+ ::= { addressMap 4 }
+
+addressMapControlEntry OBJECT-TYPE
+ SYNTAX AddressMapControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the addressMapControlTable.
+
+
+ An example of the indexing of this entry is
+ addressMapControlDroppedFrames.1"
+ INDEX { addressMapControlIndex }
+ ::= { addressMapControlTable 1 }
+
+AddressMapControlEntry ::= SEQUENCE {
+ addressMapControlIndex Integer32,
+ addressMapControlDataSource DataSource,
+ addressMapControlDroppedFrames Counter32,
+ addressMapControlOwner OwnerString,
+ addressMapControlStatus RowStatus
+}
+
+addressMapControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique index for this entry in the addressMapControlTable."
+ ::= { addressMapControlEntry 1 }
+
+addressMapControlDataSource OBJECT-TYPE
+ SYNTAX DataSource
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The source of data for this addressMapControlEntry."
+ ::= { addressMapControlEntry 2 }
+
+addressMapControlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { addressMapControlEntry 3 }
+
+
+
+
+addressMapControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { addressMapControlEntry 4 }
+
+addressMapControlStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this addressMap control entry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value.
+
+ If this object is not equal to active(1), all associated
+ entries in the addressMapTable shall be deleted."
+ ::= { addressMapControlEntry 5 }
+
+addressMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AddressMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of network layer address to physical address to
+ interface mappings.
+
+ The probe will add entries to this table based on the source
+ MAC and network addresses seen in packets without MAC-level
+ errors. The probe will populate this table for all protocols
+ in the protocol directory table whose value of
+ protocolDirAddressMapConfig is equal to supportedOn(3), and
+ will delete any entries whose protocolDirEntry is deleted or
+ has a protocolDirAddressMapConfig value of supportedOff(2)."
+ ::= { addressMap 5 }
+
+addressMapEntry OBJECT-TYPE
+ SYNTAX AddressMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the addressMapTable.
+ The protocolDirLocalIndex in the index identifies the network
+ layer protocol of the addressMapNetworkAddress.
+
+
+ An example of the indexing of this entry is
+ addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1"
+ INDEX { addressMapTimeMark, protocolDirLocalIndex,
+ addressMapNetworkAddress, addressMapSource }
+ ::= { addressMapTable 1 }
+
+AddressMapEntry ::= SEQUENCE {
+ addressMapTimeMark TimeFilter,
+ addressMapNetworkAddress OCTET STRING,
+ addressMapSource OBJECT IDENTIFIER,
+ addressMapPhysicalAddress OCTET STRING,
+ addressMapLastChange TimeStamp
+}
+
+addressMapTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter textual
+ convention to see how this works."
+ ::= { addressMapEntry 1 }
+
+addressMapNetworkAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network address for this relation.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the protocolDirLocalIndex component of the
+ index.
+
+ For example, if the protocolDirLocalIndex indicates an
+ encapsulation of ip, this object is encoded as a length
+ octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { addressMapEntry 2 }
+
+addressMapSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface or port on which the associated network
+ address was most recently seen.
+
+
+
+ If this address mapping was discovered on an interface, this
+ object shall identify the instance of the ifIndex
+ object, defined in [3,5], for the desired interface.
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1.
+
+ If this address mapping was discovered on a port, this
+ object shall identify the instance of the rptrGroupPortIndex
+ object, defined in [RFC1516], for the desired port.
+ For example, if an entry were to receive data from
+ group #1, port #1, this object would be set to
+ rptrGroupPortIndex.1.1.
+
+ Note that while the dataSource associated with this entry
+ may only point to index objects, this object may at times
+ point to repeater port objects. This situation occurs when
+ the dataSource points to an interface which is a locally
+ attached repeater and the agent has additional information
+ about the source port of traffic seen on that repeater."
+ ::= { addressMapEntry 3 }
+
+addressMapPhysicalAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last source physical address on which the associated
+ network address was seen. If the protocol of the associated
+ network address was encapsulated inside of a network-level or
+ higher protocol, this will be the address of the next-lower
+ protocol with the addressRecognitionCapable bit enabled and
+ will be formatted as specified for that protocol."
+ ::= { addressMapEntry 4 }
+
+addressMapLastChange OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time this entry was last
+ created or the values of the physical address changed.
+
+ This can be used to help detect duplicate address problems, in
+ which case this object will be updated frequently."
+ ::= { addressMapEntry 5 }
+
+--
+-- Network Layer Host Group
+
+
+
+--
+-- Counts the amount of traffic sent from and to each network address
+-- discovered by the probe.
+-- Note that while the hlHostControlTable also has objects that
+-- control an optional alHostTable, implementation of the alHostTable is
+-- not required to fully implement this group.
+
+hlHostControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HlHostControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of higher layer (i.e. non-MAC) host table control entries.
+
+ These entries will enable the collection of the network and
+ application level host tables indexed by network addresses.
+ Both the network and application level host tables are
+ controlled by this table is so that they will both be created
+ and deleted at the same time, further increasing the ease with
+ which they can be implemented as a single datastore (note that
+ if an implementation stores application layer host records in
+ memory, it can derive network layer host records from them).
+
+ Entries in the nlHostTable will be created on behalf of each
+ entry in this table. Additionally, if this probe implements
+ the alHostTable, entries in the alHostTable will be created on
+ behalf of each entry in this table.
+
+ Implementations are encouraged to add an entry per monitored
+ interface upon initialization so that a default collection
+ of host statistics is available."
+ ::= { nlHost 1 }
+
+hlHostControlEntry OBJECT-TYPE
+ SYNTAX HlHostControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the hlHostControlTable.
+
+ An example of the indexing of this entry is
+ hlHostControlNlDroppedFrames.1"
+ INDEX { hlHostControlIndex }
+ ::= { hlHostControlTable 1 }
+
+HlHostControlEntry ::= SEQUENCE {
+ hlHostControlIndex Integer32,
+ hlHostControlDataSource DataSource,
+
+
+ hlHostControlNlDroppedFrames Counter32,
+ hlHostControlNlInserts Counter32,
+ hlHostControlNlDeletes Counter32,
+ hlHostControlNlMaxDesiredEntries Integer32,
+ hlHostControlAlDroppedFrames Counter32,
+ hlHostControlAlInserts Counter32,
+ hlHostControlAlDeletes Counter32,
+ hlHostControlAlMaxDesiredEntries Integer32,
+ hlHostControlOwner OwnerString,
+ hlHostControlStatus RowStatus
+}
+
+hlHostControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ hlHostControlTable. Each such entry defines
+ a function that discovers hosts on a particular
+ interface and places statistics about them in the
+ nlHostTable, and optionally in the alHostTable, on
+ behalf of this hlHostControlEntry."
+ ::= { hlHostControlEntry 1 }
+
+hlHostControlDataSource OBJECT-TYPE
+ SYNTAX DataSource
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The source of data for the associated host tables.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the
+ identified interface.
+
+ This object may not be modified if the associated
+ hlHostControlStatus object is equal to active(1)."
+ ::= { hlHostControlEntry 2 }
+
+hlHostControlNlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for the associated
+
+ nlHost entries for whatever reason. Most often, this event
+ occurs when the probe is out of some resources and decides to
+ shed load from this collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that if the nlHostTable is inactive because no protocols
+ are enabled in the protocol directory, this value should be 0.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { hlHostControlEntry 3 }
+
+hlHostControlNlInserts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an nlHost entry has been
+ inserted into the nlHost table. If an entry is inserted, then
+ deleted, and then inserted, this counter will be incremented
+ by 2.
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+ data structures for those short periods of time.
+
+ Note that the table size can be determined by subtracting
+ hlHostControlNlDeletes from hlHostControlNlInserts."
+ ::= { hlHostControlEntry 4 }
+
+hlHostControlNlDeletes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an nlHost entry has been
+ deleted from the nlHost table (for any reason). If an entry
+ is deleted, then inserted, and then deleted, this counter will
+ be incremented by 2.
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+
+
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+ data structures for those short periods of time.
+
+ Note that the table size can be determined by subtracting
+ hlHostControlNlDeletes from hlHostControlNlInserts."
+ ::= { hlHostControlEntry 5 }
+
+hlHostControlNlMaxDesiredEntries OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of entries that are desired in the
+ nlHostTable on behalf of this control entry. The probe will
+ not create more than this number of associated entries in the
+ table, but may choose to create fewer entries in this table
+ for any reason including the lack of resources.
+
+ If this object is set to a value less than the current number
+ of entries, enough entries are chosen in an
+ implementation-dependent manner and deleted so that the number
+ of entries in the table equals the value of this object.
+
+ If this value is set to -1, the probe may create any number
+ of entries in this table. If the associated
+ hlHostControlStatus object is equal to `active', this
+ object may not be modified.
+
+ This object may be used to control how resources are allocated
+ on the probe for the various RMON functions."
+ ::= { hlHostControlEntry 6 }
+
+hlHostControlAlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for the associated
+ alHost entries for whatever reason. Most often, this event
+ occurs when the probe is out of some resources and decides to
+ shed load from this collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that if the alHostTable is not implemented or is inactive
+ because no protocols are enabled in the protocol directory,
+ this value should be 0.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { hlHostControlEntry 7 }
+
+hlHostControlAlInserts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an alHost entry has been
+ inserted into the alHost table. If an entry is inserted, then
+ deleted, and then inserted, this counter will be incremented
+ by 2.
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+ data structures for those short periods of time.
+
+ Note that the table size can be determined by subtracting
+ hlHostControlAlDeletes from hlHostControlAlInserts."
+ ::= { hlHostControlEntry 8 }
+
+hlHostControlAlDeletes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an alHost entry has been
+ deleted from the alHost table (for any reason). If an entry
+ is deleted, then inserted, and then deleted, this counter will
+ be incremented by 2.
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+ data structures for those short periods of time.
+
+ Note that the table size can be determined by subtracting
+ hlHostControlAlDeletes from hlHostControlAlInserts."
+
+
+
+ ::= { hlHostControlEntry 9 }
+
+hlHostControlAlMaxDesiredEntries OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of entries that are desired in the alHost
+ table on behalf of this control entry. The probe will not
+ create more than this number of associated entries in the
+ table, but may choose to create fewer entries in this table
+ for any reason including the lack of resources.
+
+ If this object is set to a value less than the current number
+ of entries, enough entries are chosen in an
+ implementation-dependent manner and deleted so that the number
+ of entries in the table equals the value of this object.
+
+ If this value is set to -1, the probe may create any number
+ of entries in this table. If the associated
+ hlHostControlStatus object is equal to `active', this
+ object may not be modified.
+
+ This object may be used to control how resources are allocated
+ on the probe for the various RMON functions."
+ ::= { hlHostControlEntry 10 }
+
+hlHostControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { hlHostControlEntry 11 }
+
+hlHostControlStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this hlHostControlEntry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value.
+
+ If this object is not equal to active(1), all associated
+ entries in the nlHostTable and alHostTable shall be deleted."
+ ::= { hlHostControlEntry 12 }
+
+nlHostTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NlHostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for a particular network layer
+ address that has been discovered on an interface of this
+ device.
+
+ The probe will populate this table for all network layer
+ protocols in the protocol directory table whose value of
+ protocolDirHostConfig is equal to supportedOn(3), and
+ will delete any entries whose protocolDirEntry is deleted or
+ has a protocolDirHostConfig value of supportedOff(2).
+
+ The probe will add to this table all addresses seen
+ as the source or destination address in all packets with no
+ MAC errors, and will increment octet and packet counts in the
+ table for all packets with no MAC errors."
+::= { nlHost 2 }
+
+nlHostEntry OBJECT-TYPE
+ SYNTAX NlHostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the nlHostTable.
+
+ The hlHostControlIndex value in the index identifies the
+ hlHostControlEntry on whose behalf this entry was created.
+ The protocolDirLocalIndex value in the index identifies the
+ network layer protocol of the nlHostAddress.
+
+ An example of the indexing of this entry is
+ nlHostOutPkts.1.783495.18.4.128.2.6.6."
+ INDEX { hlHostControlIndex, nlHostTimeMark,
+ protocolDirLocalIndex, nlHostAddress }
+ ::= { nlHostTable 1 }
+
+NlHostEntry ::= SEQUENCE {
+ nlHostTimeMark TimeFilter,
+ nlHostAddress OCTET STRING,
+ nlHostInPkts ZeroBasedCounter32,
+ nlHostOutPkts ZeroBasedCounter32,
+ nlHostInOctets ZeroBasedCounter32,
+ nlHostOutOctets ZeroBasedCounter32,
+
+
+ nlHostOutMacNonUnicastPkts ZeroBasedCounter32,
+ nlHostCreateTime LastCreateTime
+}
+
+nlHostTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter textual
+ convention to see how this works."
+ ::= { nlHostEntry 1 }
+
+nlHostAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network address for this nlHostEntry.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the protocolDirLocalIndex component of the index.
+
+ For example, if the protocolDirLocalIndex indicates an
+ encapsulation of ip, this object is encoded as a length
+ octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { nlHostEntry 2 }
+
+nlHostInPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets without errors transmitted to
+ this address since it was added to the nlHostTable. Note that
+ this is the number of link-layer packets, so if a single
+ network-layer packet is fragmented into several link-layer
+ frames, this counter is incremented several times."
+ ::= { nlHostEntry 3 }
+
+nlHostOutPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets without errors transmitted by
+
+
+ this address since it was added to the nlHostTable. Note that
+ this is the number of link-layer packets, so if a single
+ network-layer packet is fragmented into several link-layer
+ frames, this counter is incremented several times."
+ ::= { nlHostEntry 4 }
+
+nlHostInOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted to this address
+ since it was added to the nlHostTable (excluding
+ framing bits but including FCS octets), excluding
+ those octets in packets that contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { nlHostEntry 5 }
+
+nlHostOutOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted by this address
+ since it was added to the nlHostTable (excluding
+ framing bits but including FCS octets), excluding
+ those octets in packets that contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { nlHostEntry 6 }
+
+nlHostOutMacNonUnicastPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets without errors transmitted by this
+ address that were directed to any MAC broadcast addresses
+ or to any MAC multicast addresses since this host was
+ added to the nlHostTable. Note that this is the number of
+ link-layer packets, so if a single network-layer packet is
+ fragmented into several link-layer frames, this counter is
+ incremented several times."
+
+
+
+ ::= { nlHostEntry 7 }
+
+nlHostCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this entry was last activated.
+ This can be used by the management station to ensure that the
+ entry has not been deleted and recreated between polls."
+ ::= { nlHostEntry 8 }
+
+--
+-- Network Layer Matrix Group
+--
+-- Counts the amount of traffic sent between each pair of network
+-- addresses discovered by the probe.
+-- Note that while the hlMatrixControlTable also has objects that
+-- control optional alMatrixTables, implementation of the
+-- alMatrixTables is not required to fully implement this group.
+
+hlMatrixControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HlMatrixControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of higher layer (i.e. non-MAC) matrix control entries.
+
+ These entries will enable the collection of the network and
+ application level matrix tables containing conversation
+ statistics indexed by pairs of network addresses.
+ Both the network and application level matrix tables are
+ controlled by this table is so that they will both be created
+ and deleted at the same time, further increasing the ease with
+ which they can be implemented as a single datastore (note that
+ if an implementation stores application layer matrix records
+ in memory, it can derive network layer matrix records from
+ them).
+
+ Entries in the nlMatrixSDTable and nlMatrixDSTable will be
+ created on behalf of each entry in this table. Additionally,
+ if this probe implements the alMatrix tables, entries in the
+ alMatrix tables will be created on behalf of each entry in
+ this table."
+ ::= { nlMatrix 1 }
+
+hlMatrixControlEntry OBJECT-TYPE
+ SYNTAX HlMatrixControlEntry
+
+
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the hlMatrixControlTable.
+
+ An example of indexing of this entry is
+ hlMatrixControlNlDroppedFrames.1"
+ INDEX { hlMatrixControlIndex }
+ ::= { hlMatrixControlTable 1 }
+
+HlMatrixControlEntry ::= SEQUENCE {
+ hlMatrixControlIndex Integer32,
+ hlMatrixControlDataSource DataSource,
+ hlMatrixControlNlDroppedFrames Counter32,
+ hlMatrixControlNlInserts Counter32,
+ hlMatrixControlNlDeletes Counter32,
+ hlMatrixControlNlMaxDesiredEntries Integer32,
+ hlMatrixControlAlDroppedFrames Counter32,
+ hlMatrixControlAlInserts Counter32,
+ hlMatrixControlAlDeletes Counter32,
+ hlMatrixControlAlMaxDesiredEntries Integer32,
+ hlMatrixControlOwner OwnerString,
+ hlMatrixControlStatus RowStatus
+}
+
+hlMatrixControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ hlMatrixControlTable. Each such entry defines
+ a function that discovers conversations on a particular
+ interface and places statistics about them in the
+ nlMatrixSDTable and the nlMatrixDSTable, and optionally the
+ alMatrixSDTable and alMatrixDSTable, on behalf of this
+ hlMatrixControlEntry."
+ ::= { hlMatrixControlEntry 1 }
+
+hlMatrixControlDataSource OBJECT-TYPE
+ SYNTAX DataSource
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The source of the data for the associated matrix tables.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the
+
+
+ identified interface.
+
+ This object may not be modified if the associated
+ hlMatrixControlStatus object is equal to active(1)."
+ ::= { hlMatrixControlEntry 2 }
+
+hlMatrixControlNlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that if the nlMatrixTables are inactive because no
+ protocols are enabled in the protocol directory, this value
+ should be 0.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { hlMatrixControlEntry 3 }
+
+hlMatrixControlNlInserts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an nlMatrix entry has been
+ inserted into the nlMatrix tables. If an entry is inserted,
+ then deleted, and then inserted, this counter will be
+ incremented by 2. The addition of a conversation into both
+ the nlMatrixSDTable and nlMatrixDSTable shall be counted as
+ two insertions (even though every addition into one table must
+ be accompanied by an insertion into the other).
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+ data structures for those short periods of time.
+
+
+ Note that the sum of then nlMatrixSDTable and nlMatrixDSTable
+ sizes can be determined by subtracting
+ hlMatrixControlNlDeletes from hlMatrixControlNlInserts."
+ ::= { hlMatrixControlEntry 4 }
+
+hlMatrixControlNlDeletes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an nlMatrix entry has been
+ deleted from the nlMatrix tables (for any reason). If an
+ entry is deleted, then inserted, and then deleted, this
+ counter will be incremented by 2. The deletion of a
+ conversation from both the nlMatrixSDTable and nlMatrixDSTable
+ shall be counted as two deletions (even though every deletion
+ from one table must be accompanied by a deletion from the
+ other).
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+ data structures for those short periods of time.
+
+ Note that the table size can be determined by subtracting
+ hlMatrixControlNlDeletes from hlMatrixControlNlInserts."
+ ::= { hlMatrixControlEntry 5 }
+
+hlMatrixControlNlMaxDesiredEntries OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of entries that are desired in the
+ nlMatrix tables on behalf of this control entry. The probe
+ will not create more than this number of associated entries in
+ the table, but may choose to create fewer entries in this
+ table for any reason including the lack of resources.
+
+ If this object is set to a value less than the current number
+ of entries, enough entries are chosen in an
+ implementation-dependent manner and deleted so that the number
+ of entries in the table equals the value of this object.
+
+ If this value is set to -1, the probe may create any number
+ of entries in this table. If the associated
+
+
+
+
+ hlMatrixControlStatus object is equal to `active', this
+ object may not be modified.
+
+ This object may be used to control how resources are allocated
+ on the probe for the various RMON functions."
+ ::= { hlMatrixControlEntry 6 }
+
+hlMatrixControlAlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that if the alMatrixTables are not implemented or are
+ inactive because no protocols are enabled in the protocol
+ directory, this value should be 0.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { hlMatrixControlEntry 7 }
+
+hlMatrixControlAlInserts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an alMatrix entry has been
+ inserted into the alMatrix tables. If an entry is inserted,
+ then deleted, and then inserted, this counter will be
+ incremented by 2. The addition of a conversation into both
+ the alMatrixSDTable and alMatrixDSTable shall be counted as
+ two insertions (even though every addition into one table must
+ be accompanied by an insertion into the other).
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+
+ data structures for those short periods of time.
+
+ Note that the table size can be determined by subtracting
+ hlMatrixControlAlDeletes from hlMatrixControlAlInserts."
+ ::= { hlMatrixControlEntry 8 }
+
+hlMatrixControlAlDeletes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times an alMatrix entry has been
+ deleted from the alMatrix tables. If an entry is deleted,
+ then inserted, and then deleted, this counter will be
+ incremented by 2. The deletion of a conversation from both
+ the alMatrixSDTable and alMatrixDSTable shall be counted as
+ two deletions (even though every deletion from one table must
+ be accompanied by a deletion from the other).
+
+ To allow for efficient implementation strategies, agents may
+ delay updating this object for short periods of time. For
+ example, an implementation strategy may allow internal
+ data structures to differ from those visible via SNMP for
+ short periods of time. This counter may reflect the internal
+ data structures for those short periods of time.
+
+ Note that the table size can be determined by subtracting
+ hlMatrixControlAlDeletes from hlMatrixControlAlInserts."
+ ::= { hlMatrixControlEntry 9 }
+
+hlMatrixControlAlMaxDesiredEntries OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of entries that are desired in the
+ alMatrix tables on behalf of this control entry. The probe
+ will not create more than this number of associated entries in
+ the table, but may choose to create fewer entries in this
+ table for any reason including the lack of resources.
+
+ If this object is set to a value less than the current number
+ of entries, enough entries are chosen in an
+ implementation-dependent manner and deleted so that the number
+ of entries in the table equals the value of this object.
+
+ If this value is set to -1, the probe may create any number
+ of entries in this table. If the associated
+
+
+ hlMatrixControlStatus object is equal to `active', this
+ object may not be modified.
+
+ This object may be used to control how resources are allocated
+ on the probe for the various RMON functions."
+ ::= { hlMatrixControlEntry 10 }
+
+hlMatrixControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { hlMatrixControlEntry 11 }
+
+hlMatrixControlStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this hlMatrixControlEntry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value.
+
+ If this object is not equal to active(1), all
+ associated entries in the nlMatrixSDTable,
+ nlMatrixDSTable, alMatrixSDTable, and the alMatrixDSTable
+ shall be deleted by the agent."
+ ::= { hlMatrixControlEntry 12 }
+
+nlMatrixSDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NlMatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of traffic matrix entries which collect statistics for
+ conversations between two network-level addresses. This table
+ is indexed first by the source address and then by the
+ destination address to make it convenient to collect all
+ conversations from a particular address.
+
+ The probe will populate this table for all network layer
+ protocols in the protocol directory table whose value of
+ protocolDirMatrixConfig is equal to supportedOn(3), and
+ will delete any entries whose protocolDirEntry is deleted or
+ has a protocolDirMatrixConfig value of supportedOff(2).
+
+ The probe will add to this table all pairs of addresses
+ seen in all packets with no MAC errors, and will increment
+ octet and packet counts in the table for all packets with no
+ MAC errors.
+
+ Further, this table will only contain entries that have a
+ corresponding entry in the nlMatrixDSTable with the same
+ source address and destination address."
+ ::= { nlMatrix 2 }
+
+nlMatrixSDEntry OBJECT-TYPE
+ SYNTAX NlMatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the nlMatrixSDTable.
+
+ The hlMatrixControlIndex value in the index identifies the
+ hlMatrixControlEntry on whose behalf this entry was created.
+ The protocolDirLocalIndex value in the index identifies the
+ network layer protocol of the nlMatrixSDSourceAddress and
+ nlMatrixSDDestAddress.
+
+ An example of the indexing of this table is
+ nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7"
+ INDEX { hlMatrixControlIndex, nlMatrixSDTimeMark,
+ protocolDirLocalIndex,
+ nlMatrixSDSourceAddress, nlMatrixSDDestAddress }
+ ::= { nlMatrixSDTable 1 }
+
+NlMatrixSDEntry ::= SEQUENCE {
+ nlMatrixSDTimeMark TimeFilter,
+ nlMatrixSDSourceAddress OCTET STRING,
+ nlMatrixSDDestAddress OCTET STRING,
+ nlMatrixSDPkts ZeroBasedCounter32,
+ nlMatrixSDOctets ZeroBasedCounter32,
+ nlMatrixSDCreateTime LastCreateTime
+}
+
+nlMatrixSDTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter textual
+ convention to see how this works."
+ ::= { nlMatrixSDEntry 1 }
+
+
+
+nlMatrixSDSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network source address for this nlMatrixSDEntry.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the protocolDirLocalIndex component of the index.
+
+ For example, if the protocolDirLocalIndex indicates an
+ encapsulation of ip, this object is encoded as a length
+ octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { nlMatrixSDEntry 2 }
+
+nlMatrixSDDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network destination address for this
+ nlMatrixSDEntry.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the protocolDirLocalIndex component of the index.
+
+ For example, if the protocolDirLocalIndex indicates an
+ encapsulation of ip, this object is encoded as a length
+ octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { nlMatrixSDEntry 3 }
+
+nlMatrixSDPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets without errors transmitted from the
+ source address to the destination address since this entry was
+ added to the nlMatrixSDTable. Note that this is the number of
+ link-layer packets, so if a single network-layer packet is
+ fragmented into several link-layer frames, this counter is
+ incremented several times."
+ ::= { nlMatrixSDEntry 4 }
+
+
+
+nlMatrixSDOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted from the source address to
+ the destination address since this entry was added to the
+ nlMatrixSDTable (excluding framing bits but
+ including FCS octets), excluding those octets in packets that
+ contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { nlMatrixSDEntry 5 }
+
+nlMatrixSDCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this entry was last activated.
+ This can be used by the management station to ensure that the
+ entry has not been deleted and recreated between polls."
+ ::= { nlMatrixSDEntry 6 }
+
+
+-- Traffic matrix tables from destination to source
+
+nlMatrixDSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NlMatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of traffic matrix entries which collect statistics for
+ conversations between two network-level addresses. This table
+ is indexed first by the destination address and then by the
+ source address to make it convenient to collect all
+ conversations to a particular address.
+
+ The probe will populate this table for all network layer
+ protocols in the protocol directory table whose value of
+ protocolDirMatrixConfig is equal to supportedOn(3), and
+ will delete any entries whose protocolDirEntry is deleted or
+ has a protocolDirMatrixConfig value of supportedOff(2).
+
+ The probe will add to this table all pairs of addresses
+ seen in all packets with no MAC errors, and will increment
+
+
+ octet and packet counts in the table for all packets with no
+ MAC errors.
+
+ Further, this table will only contain entries that have a
+ corresponding entry in the nlMatrixSDTable with the same
+ source address and destination address."
+ ::= { nlMatrix 3 }
+
+nlMatrixDSEntry OBJECT-TYPE
+ SYNTAX NlMatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the nlMatrixDSTable.
+
+ The hlMatrixControlIndex value in the index identifies the
+ hlMatrixControlEntry on whose behalf this entry was created.
+ The protocolDirLocalIndex value in the index identifies the
+ network layer protocol of the nlMatrixDSSourceAddress and
+ nlMatrixDSDestAddress.
+
+ An example of the indexing of this table is
+ nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6"
+ INDEX { hlMatrixControlIndex, nlMatrixDSTimeMark,
+ protocolDirLocalIndex,
+ nlMatrixDSDestAddress, nlMatrixDSSourceAddress }
+ ::= { nlMatrixDSTable 1 }
+
+NlMatrixDSEntry ::= SEQUENCE {
+ nlMatrixDSTimeMark TimeFilter,
+ nlMatrixDSSourceAddress OCTET STRING,
+ nlMatrixDSDestAddress OCTET STRING,
+ nlMatrixDSPkts ZeroBasedCounter32,
+ nlMatrixDSOctets ZeroBasedCounter32,
+ nlMatrixDSCreateTime LastCreateTime
+}
+
+nlMatrixDSTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter textual
+ convention to see how this works."
+ ::= { nlMatrixDSEntry 1 }
+
+nlMatrixDSSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+
+
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network source address for this nlMatrixDSEntry.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the protocolDirLocalIndex component of the index.
+
+ For example, if the protocolDirLocalIndex indicates an
+ encapsulation of ip, this object is encoded as a length
+ octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { nlMatrixDSEntry 2 }
+
+nlMatrixDSDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network destination address for this
+ nlMatrixDSEntry.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the protocolDirLocalIndex component of the index.
+
+ For example, if the protocolDirLocalIndex indicates an
+ encapsulation of ip, this object is encoded as a length
+ octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { nlMatrixDSEntry 3 }
+
+nlMatrixDSPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets without errors transmitted from the
+ source address to the destination address since this entry was
+ added to the nlMatrixDSTable. Note that this is the number of
+ link-layer packets, so if a single network-layer packet is
+ fragmented into several link-layer frames, this counter is
+ incremented several times."
+ ::= { nlMatrixDSEntry 4 }
+
+nlMatrixDSOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted from the source address
+ to the destination address since this entry was added to the
+ nlMatrixDSTable (excluding framing bits but
+ including FCS octets), excluding those octets in packets that
+ contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { nlMatrixDSEntry 5 }
+
+nlMatrixDSCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this entry was last activated.
+ This can be used by the management station to ensure that the
+ entry has not been deleted and recreated between polls."
+ ::= { nlMatrixDSEntry 6 }
+
+nlMatrixTopNControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NlMatrixTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that control the creation of a
+ report of the top N matrix entries according to
+ a selected metric."
+ ::= { nlMatrix 4 }
+
+nlMatrixTopNControlEntry OBJECT-TYPE
+ SYNTAX NlMatrixTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the nlMatrixTopNControlTable.
+
+ An example of the indexing of this table is
+ nlMatrixTopNControlDuration.3"
+ INDEX { nlMatrixTopNControlIndex }
+ ::= { nlMatrixTopNControlTable 1 }
+
+NlMatrixTopNControlEntry ::= SEQUENCE {
+ nlMatrixTopNControlIndex Integer32,
+
+
+ nlMatrixTopNControlMatrixIndex Integer32,
+ nlMatrixTopNControlRateBase INTEGER,
+ nlMatrixTopNControlTimeRemaining Integer32,
+ nlMatrixTopNControlGeneratedReports Counter32,
+ nlMatrixTopNControlDuration Integer32,
+ nlMatrixTopNControlRequestedSize Integer32,
+ nlMatrixTopNControlGrantedSize Integer32,
+ nlMatrixTopNControlStartTime TimeStamp,
+ nlMatrixTopNControlOwner OwnerString,
+ nlMatrixTopNControlStatus RowStatus
+}
+
+nlMatrixTopNControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the nlMatrixTopNControlTable. Each such
+ entry defines one top N report prepared for
+ one interface."
+ ::= { nlMatrixTopNControlEntry 1 }
+
+nlMatrixTopNControlMatrixIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The nlMatrix[SD/DS] table for which a top N report will be
+ prepared on behalf of this entry. The nlMatrix[SD/DS] table
+ is identified by the value of the hlMatrixControlIndex
+ for that table - that value is used here to identify the
+ particular table.
+
+ This object may not be modified if the associated
+ nlMatrixTopNControlStatus object is equal to active(1)."
+ ::= { nlMatrixTopNControlEntry 2 }
+
+nlMatrixTopNControlRateBase OBJECT-TYPE
+ SYNTAX INTEGER {
+ nlMatrixTopNPkts(1),
+ nlMatrixTopNOctets(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The variable for each nlMatrix[SD/DS] entry that the
+ nlMatrixTopNEntries are sorted by.
+
+
+ This object may not be modified if the associated
+ nlMatrixTopNControlStatus object is equal to active(1)."
+ ::= { nlMatrixTopNControlEntry 3 }
+
+nlMatrixTopNControlTimeRemaining OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds left in the report currently
+ being collected. When this object is modified by
+ the management station, a new collection is started,
+ possibly aborting a currently running report. The
+ new value is used as the requested duration of this
+ report, and is immediately loaded into the associated
+ nlMatrixTopNControlDuration object.
+ When the report finishes, the probe will automatically
+ start another collection with the same initial value
+ of nlMatrixTopNControlTimeRemaining. Thus the management
+ station may simply read the resulting reports repeatedly,
+ checking the startTime and duration each time to ensure that a
+ report was not missed or that the report parameters were not
+ changed.
+
+ While the value of this object is non-zero, it decrements
+ by one per second until it reaches zero. At the time
+ that this object decrements to zero, the report is made
+ accessible in the nlMatrixTopNTable, overwriting any report
+ that may be there.
+
+ When this object is modified by the management station, any
+ associated entries in the nlMatrixTopNTable shall be deleted.
+
+ (Note that this is a different algorithm than the one used in
+ the hostTopNTable)."
+ DEFVAL { 1800 }
+ ::= { nlMatrixTopNControlEntry 4 }
+
+nlMatrixTopNControlGeneratedReports OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of reports that have been generated by this entry."
+ ::= { nlMatrixTopNControlEntry 5 }
+
+nlMatrixTopNControlDuration OBJECT-TYPE
+ SYNTAX Integer32
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that this report has collected
+ during the last sampling interval.
+
+ When the associated nlMatrixTopNControlTimeRemaining object is
+ set, this object shall be set by the probe to the
+ same value and shall not be modified until the next
+ time the nlMatrixTopNControlTimeRemaining is set.
+ This value shall be zero if no reports have been
+ requested for this nlMatrixTopNControlEntry."
+ ::= { nlMatrixTopNControlEntry 6 }
+
+nlMatrixTopNControlRequestedSize OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of matrix entries requested for this report.
+
+ When this object is created or modified, the probe
+ should set nlMatrixTopNControlGrantedSize as closely to this
+ object as is possible for the particular probe
+ implementation and available resources."
+ DEFVAL { 150 }
+ ::= { nlMatrixTopNControlEntry 7 }
+
+nlMatrixTopNControlGrantedSize OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of matrix entries in this report.
+
+ When the associated nlMatrixTopNControlRequestedSize object is
+ created or modified, the probe should set this
+ object as closely to the requested value as is
+ possible for the particular implementation and
+ available resources. The probe must not lower this
+ value except as a result of a set to the associated
+ nlMatrixTopNControlRequestedSize object.
+
+ If the value of nlMatrixTopNControlRateBase is equal to
+ nlMatrixTopNPkts, when the next topN report is generated,
+ matrix entries with the highest value of nlMatrixTopNPktRate
+ shall be placed in this table in decreasing order of this rate
+ until there is no more room or until there are no more
+
+
+ matrix entries.
+
+ If the value of nlMatrixTopNControlRateBase is equal to
+ nlMatrixTopNOctets, when the next topN report is generated,
+ matrix entries with the highest value of nlMatrixTopNOctetRate
+ shall be placed in this table in decreasing order of this rate
+ until there is no more room or until there are no more
+ matrix entries.
+
+ It is an implementation-specific matter how entries with the
+ same value of nlMatrixTopNPktRate or nlMatrixTopNOctetRate are
+ sorted. It is also an implementation-specific matter as to
+ whether or not zero-valued entries are available."
+ ::= { nlMatrixTopNControlEntry 8 }
+
+nlMatrixTopNControlStartTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this top N report was
+ last started. In other words, this is the time that
+ the associated nlMatrixTopNControlTimeRemaining object was
+ modified to start the requested report or the time
+ the report was last automatically (re)started.
+
+ This object may be used by the management station to
+ determine if a report was missed or not."
+ ::= { nlMatrixTopNControlEntry 9 }
+
+nlMatrixTopNControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { nlMatrixTopNControlEntry 10 }
+
+nlMatrixTopNControlStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this nlMatrixTopNControlEntry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value.
+
+
+ If this object is not equal to active(1), all
+ associated entries in the nlMatrixTopNTable shall be deleted
+ by the agent."
+ ::= { nlMatrixTopNControlEntry 11 }
+
+nlMatrixTopNTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NlMatrixTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of statistics for those network layer matrix entries
+ that have counted the highest number of octets or packets."
+ ::= { nlMatrix 5 }
+
+nlMatrixTopNEntry OBJECT-TYPE
+ SYNTAX NlMatrixTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the nlMatrixTopNTable.
+
+ The nlMatrixTopNControlIndex value in the index identifies the
+ nlMatrixTopNControlEntry on whose behalf this entry was
+ created.
+
+ An example of the indexing of this table is
+ nlMatrixTopNPktRate.3.10"
+ INDEX { nlMatrixTopNControlIndex, nlMatrixTopNIndex }
+ ::= { nlMatrixTopNTable 1 }
+
+NlMatrixTopNEntry ::= SEQUENCE {
+ nlMatrixTopNIndex Integer32,
+ nlMatrixTopNProtocolDirLocalIndex Integer32,
+ nlMatrixTopNSourceAddress OCTET STRING,
+ nlMatrixTopNDestAddress OCTET STRING,
+ nlMatrixTopNPktRate Gauge32,
+ nlMatrixTopNReversePktRate Gauge32,
+ nlMatrixTopNOctetRate Gauge32,
+ nlMatrixTopNReverseOctetRate Gauge32
+}
+
+nlMatrixTopNIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in
+ the nlMatrixTopNTable among those in the same report.
+
+
+ This index is between 1 and N, where N is the
+ number of entries in this report.
+
+ If the value of nlMatrixTopNControlRateBase is equal to
+ nlMatrixTopNPkts, increasing values of nlMatrixTopNIndex shall
+ be assigned to entries with decreasing values of
+ nlMatrixTopNPktRate until index N is assigned or there are no
+ more nlMatrixTopNEntries.
+
+ If the value of nlMatrixTopNControlRateBase is equal to
+ nlMatrixTopNOctets, increasing values of nlMatrixTopNIndex
+ shall be assigned to entries with decreasing values of
+ nlMatrixTopNOctetRate until index N is assigned or there are
+ no more nlMatrixTopNEntries."
+ ::= { nlMatrixTopNEntry 1 }
+
+nlMatrixTopNProtocolDirLocalIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The protocolDirLocalIndex of the network layer protocol of
+ this entry's network address."
+ ::= { nlMatrixTopNEntry 2 }
+
+nlMatrixTopNSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network layer address of the source host in this
+ conversation.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the associated nlMatrixTopNProtocolDirLocalIndex.
+
+ For example, if the protocolDirLocalIndex indicates an
+ encapsulation of ip, this object is encoded as a length
+ octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { nlMatrixTopNEntry 3 }
+
+nlMatrixTopNDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+ "The network layer address of the destination host in this
+ conversation.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the associated nlMatrixTopNProtocolDirLocalIndex.
+
+ For example, if the nlMatrixTopNProtocolDirLocalIndex
+ indicates an encapsulation of ip, this object is encoded as a
+ length octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { nlMatrixTopNEntry 4 }
+
+nlMatrixTopNPktRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets seen from the source host
+ to the destination host during this sampling interval, counted
+ using the rules for counting the nlMatrixSDPkts object.
+ If the value of nlMatrixTopNControlRateBase is
+ nlMatrixTopNPkts, this variable will be used to sort this
+ report."
+ ::= { nlMatrixTopNEntry 5 }
+
+nlMatrixTopNReversePktRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets seen from the destination host to the
+ source host during this sampling interval, counted
+ using the rules for counting the nlMatrixSDPkts object (note
+ that the corresponding nlMatrixSDPkts object selected is the
+ one whose source address is equal to nlMatrixTopNDestAddress
+ and whose destination address is equal to
+ nlMatrixTopNSourceAddress.)
+
+ Note that if the value of nlMatrixTopNControlRateBase is equal
+ to nlMatrixTopNPkts, the sort of topN entries is based
+ entirely on nlMatrixTopNPktRate, and not on the value of this
+ object."
+ ::= { nlMatrixTopNEntry 6 }
+
+nlMatrixTopNOctetRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+
+
+ STATUS current
+ DESCRIPTION
+ "The number of octets seen from the source host
+ to the destination host during this sampling interval, counted
+ using the rules for counting the nlMatrixSDOctets object. If
+ the value of nlMatrixTopNControlRateBase is
+ nlMatrixTopNOctets, this variable will be used to sort this
+ report."
+ ::= { nlMatrixTopNEntry 7 }
+
+nlMatrixTopNReverseOctetRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets seen from the destination host to the
+ source host during this sampling interval, counted
+ using the rules for counting the nlMatrixDSOctets object (note
+ that the corresponding nlMatrixSDOctets object selected is the
+ one whose source address is equal to nlMatrixTopNDestAddress
+ and whose destination address is equal to
+ nlMatrixTopNSourceAddress.)
+
+ Note that if the value of nlMatrixTopNControlRateBase is equal
+ to nlMatrixTopNOctets, the sort of topN entries is based
+ entirely on nlMatrixTopNOctetRate, and not on the value of
+ this object."
+ ::= { nlMatrixTopNEntry 8 }
+
+-- Application Layer Functions
+--
+-- The application layer host, matrix, and matrixTopN functions report
+-- on protocol usage at the network layer or higher. Note that the
+-- use of the term application layer does not imply that only
+-- application-layer protocols are counted, rather it means that
+-- protocols up to and including the application layer are supported.
+
+--
+-- Application Layer Host Group
+--
+-- Counts the amount of traffic, by protocol, sent from and to each
+-- network address discovered by the probe.
+-- Implementation of this group requires implementation of the Network
+-- Layer Host Group.
+
+alHostTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlHostEntry
+ MAX-ACCESS not-accessible
+
+
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for a particular protocol from a
+ particular network address that has been discovered on an
+ interface of this device.
+
+ The probe will populate this table for all protocols in the
+ protocol directory table whose value of
+ protocolDirHostConfig is equal to supportedOn(3), and
+ will delete any entries whose protocolDirEntry is deleted or
+ has a protocolDirHostConfig value of supportedOff(2).
+
+ The probe will add to this table all addresses
+ seen as the source or destination address in all packets with
+ no MAC errors, and will increment octet and packet counts in
+ the table for all packets with no MAC errors. Further,
+ entries will only be added to this table if their address
+ exists in the nlHostTable and will be deleted from this table
+ if their address is deleted from the nlHostTable."
+ ::= { alHost 1 }
+
+alHostEntry OBJECT-TYPE
+ SYNTAX AlHostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the alHostTable.
+
+ The hlHostControlIndex value in the index identifies the
+ hlHostControlEntry on whose behalf this entry was created.
+ The first protocolDirLocalIndex value in the index identifies
+ the network layer protocol of the address.
+ The nlHostAddress value in the index identifies the network
+ layer address of this entry.
+ The second protocolDirLocalIndex value in the index identifies
+ the protocol that is counted by this entry.
+
+ An example of the indexing in this entry is
+ alHostOutPkts.1.783495.18.4.128.2.6.6.34"
+ INDEX { hlHostControlIndex, alHostTimeMark,
+ protocolDirLocalIndex, nlHostAddress,
+ protocolDirLocalIndex } -- OTP-1427
+ ::= { alHostTable 1 }
+
+AlHostEntry ::= SEQUENCE {
+ alHostTimeMark TimeFilter,
+ alHostInPkts ZeroBasedCounter32,
+ alHostOutPkts ZeroBasedCounter32,
+
+
+ alHostInOctets ZeroBasedCounter32,
+ alHostOutOctets ZeroBasedCounter32,
+ alHostCreateTime LastCreateTime
+}
+
+alHostTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter textual
+ convention to see how this works."
+ ::= { alHostEntry 1 }
+
+alHostInPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets of this protocol type without errors
+ transmitted to this address since it was added to the
+ alHostTable. Note that this is the number of link-layer
+ packets, so if a single network-layer packet is fragmented
+ into several link-layer frames, this counter is incremented
+ several times."
+ ::= { alHostEntry 2 }
+
+alHostOutPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets of this protocol type without errors
+ transmitted by this address since it was added to the
+ alHostTable. Note that this is the number of link-layer
+ packets, so if a single network-layer packet is fragmented
+ into several link-layer frames, this counter is incremented
+ several times."
+ ::= { alHostEntry 3 }
+
+alHostInOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted to this address
+ of this protocol type since it was added to the
+ alHostTable (excluding framing bits but including
+
+
+ FCS octets), excluding those octets in packets that
+ contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { alHostEntry 4 }
+
+alHostOutOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted by this address
+ of this protocol type since it was added to the
+ alHostTable (excluding framing bits but including
+ FCS octets), excluding those octets in packets that
+ contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { alHostEntry 5 }
+
+alHostCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this entry was last activated.
+ This can be used by the management station to ensure that the
+ entry has not been deleted and recreated between polls."
+ ::= { alHostEntry 6 }
+
+--
+-- Application Layer Matrix Group
+--
+-- Counts the amount of traffic, by protocol, sent between each pair
+-- of network addresses discovered by the probe.
+-- Implementation of this group requires implementation of the Network
+-- Layer Matrix Group.
+
+alMatrixSDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlMatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of application traffic matrix entries which collect
+
+
+ statistics for conversations of a particular protocol between
+ two network-level addresses. This table is indexed first by
+ the source address and then by the destination address to make
+ it convenient to collect all statistics from a particular
+ address.
+
+ The probe will populate this table for all protocols in the
+ protocol directory table whose value of
+ protocolDirMatrixConfig is equal to supportedOn(3), and
+ will delete any entries whose protocolDirEntry is deleted or
+ has a protocolDirMatrixConfig value of supportedOff(2).
+
+ The probe will add to this table all pairs of addresses for
+ all protocols seen in all packets with no MAC errors, and will
+ increment octet and packet counts in the table for all packets
+ with no MAC errors. Further, entries will only be added to
+ this table if their address pair exists in the nlMatrixSDTable
+ and will be deleted from this table if the address pair is
+ deleted from the nlMatrixSDTable."
+ ::= { alMatrix 1 }
+
+alMatrixSDEntry OBJECT-TYPE
+ SYNTAX AlMatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the alMatrixSDTable.
+
+ The hlMatrixControlIndex value in the index identifies the
+ hlMatrixControlEntry on whose behalf this entry was created.
+ The first protocolDirLocalIndex value in the index identifies
+ the network layer protocol of the nlMatrixSDSourceAddress and
+ nlMatrixSDDestAddress.
+ The nlMatrixSDSourceAddress value in the index identifies the
+ network layer address of the source host in this conversation.
+ The nlMatrixSDDestAddress value in the index identifies the
+ network layer address of the destination host in this
+ conversation.
+ The second protocolDirLocalIndex value in the index identifies
+ the protocol that is counted by this entry.
+
+ An example of the indexing of this entry is
+ alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34"
+ INDEX { hlMatrixControlIndex, alMatrixSDTimeMark,
+ protocolDirLocalIndex,
+ nlMatrixSDSourceAddress, nlMatrixSDDestAddress,
+ protocolDirLocalIndex }
+ ::= { alMatrixSDTable 1 }
+
+
+AlMatrixSDEntry ::= SEQUENCE {
+ alMatrixSDTimeMark TimeFilter,
+ alMatrixSDPkts ZeroBasedCounter32,
+ alMatrixSDOctets ZeroBasedCounter32,
+ alMatrixSDCreateTime LastCreateTime
+}
+
+alMatrixSDTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter textual
+ convention to see how this works."
+ ::= { alMatrixSDEntry 1 }
+
+alMatrixSDPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets of this protocol type without errors
+ transmitted from the source address to the destination address
+ since this entry was added to the alMatrixSDTable. Note that
+ this is the number of link-layer packets, so if a single
+ network-layer packet is fragmented into several link-layer
+ frames, this counter is incremented several times."
+ ::= { alMatrixSDEntry 2 }
+
+alMatrixSDOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets in packets of this protocol type
+ transmitted from the source address to the destination address
+ since this entry was added to the alMatrixSDTable (excluding
+ framing bits but including FCS octets), excluding those octets
+ in packets that contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { alMatrixSDEntry 3 }
+
+alMatrixSDCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+
+
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this entry was last activated.
+ This can be used by the management station to ensure that the
+ entry has not been deleted and recreated between polls."
+ ::= { alMatrixSDEntry 4 }
+
+-- Traffic matrix tables from destination to source
+
+alMatrixDSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlMatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of application traffic matrix entries which collect
+ statistics for conversations of a particular protocol between
+ two network-level addresses. This table is indexed first by
+ the destination address and then by the source address to make
+ it convenient to collect all statistics to a particular
+ address.
+
+ The probe will populate this table for all protocols in the
+ protocol directory table whose value of
+ protocolDirMatrixConfig is equal to supportedOn(3), and
+ will delete any entries whose protocolDirEntry is deleted or
+ has a protocolDirMatrixConfig value of supportedOff(2).
+
+ The probe will add to this table all pairs of addresses for
+ all protocols seen in all packets with no MAC errors, and will
+ increment octet and packet counts in the table for all packets
+ with no MAC errors. Further, entries will only be added to
+ this table if their address pair exists in the nlMatrixDSTable
+ and will be deleted from this table if the address pair is
+ deleted from the nlMatrixDSTable."
+ ::= { alMatrix 2 }
+
+alMatrixDSEntry OBJECT-TYPE
+ SYNTAX AlMatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the alMatrixDSTable.
+
+ The hlMatrixControlIndex value in the index identifies the
+ hlMatrixControlEntry on whose behalf this entry was created.
+ The first protocolDirLocalIndex value in the index identifies
+ the network layer protocol of the alMatrixDSSourceAddress and
+ alMatrixDSDestAddress.
+
+
+ The nlMatrixDSDestAddress value in the index identifies the
+ network layer address of the destination host in this
+ conversation.
+ The nlMatrixDSSourceAddress value in the index identifies the
+ network layer address of the source host in this conversation.
+ The second protocolDirLocalIndex value in the index identifies
+ the protocol that is counted by this entry.
+
+ An example of the indexing of this entry is
+ alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34"
+ INDEX { hlMatrixControlIndex, alMatrixDSTimeMark,
+ protocolDirLocalIndex,
+ nlMatrixDSDestAddress, nlMatrixDSSourceAddress,
+ protocolDirLocalIndex }
+ ::= { alMatrixDSTable 1 }
+
+AlMatrixDSEntry ::= SEQUENCE {
+ alMatrixDSTimeMark TimeFilter,
+ alMatrixDSPkts ZeroBasedCounter32,
+ alMatrixDSOctets ZeroBasedCounter32,
+ alMatrixDSCreateTime LastCreateTime
+}
+
+alMatrixDSTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter textual
+ convention to see how this works."
+ ::= { alMatrixDSEntry 1 }
+
+alMatrixDSPkts OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets of this protocol type without errors
+ transmitted from the source address to the destination address
+ since this entry was added to the alMatrixDSTable. Note that
+ this is the number of link-layer packets, so if a single
+ network-layer packet is fragmented into several link-layer
+ frames, this counter is incremented several times."
+ ::= { alMatrixDSEntry 2 }
+
+alMatrixDSOctets OBJECT-TYPE
+ SYNTAX ZeroBasedCounter32
+ MAX-ACCESS read-only
+
+
+ STATUS current
+ DESCRIPTION
+ "The number of octets in packets of this protocol type
+ transmitted from the source address to the destination address
+ since this entry was added to the alMatrixDSTable (excluding
+ framing bits but including FCS octets), excluding those octets
+ in packets that contained errors.
+
+ Note this doesn't count just those octets in the particular
+ protocol frames, but includes the entire packet that contained
+ the protocol."
+ ::= { alMatrixDSEntry 3 }
+
+alMatrixDSCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this entry was last activated.
+ This can be used by the management station to ensure that the
+ entry has not been deleted and recreated between polls."
+ ::= { alMatrixDSEntry 4 }
+
+alMatrixTopNControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlMatrixTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that control the creation of a
+ report of the top N matrix entries according to
+ a selected metric."
+ ::= { alMatrix 3 }
+
+alMatrixTopNControlEntry OBJECT-TYPE
+ SYNTAX AlMatrixTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the alMatrixTopNControlTable.
+
+ An example of the indexing of this table is
+ alMatrixTopNControlDuration.3"
+ INDEX { alMatrixTopNControlIndex }
+ ::= { alMatrixTopNControlTable 1 }
+
+AlMatrixTopNControlEntry ::= SEQUENCE {
+ alMatrixTopNControlIndex Integer32,
+ alMatrixTopNControlMatrixIndex Integer32,
+
+
+ alMatrixTopNControlRateBase INTEGER,
+ alMatrixTopNControlTimeRemaining Integer32,
+ alMatrixTopNControlGeneratedReports Counter32,
+ alMatrixTopNControlDuration Integer32,
+ alMatrixTopNControlRequestedSize Integer32,
+ alMatrixTopNControlGrantedSize Integer32,
+ alMatrixTopNControlStartTime TimeStamp,
+ alMatrixTopNControlOwner OwnerString,
+ alMatrixTopNControlStatus RowStatus
+}
+
+alMatrixTopNControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the alMatrixTopNControlTable. Each such
+ entry defines one top N report prepared for
+ one interface."
+ ::= { alMatrixTopNControlEntry 1 }
+
+alMatrixTopNControlMatrixIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The alMatrix[SD/DS] table for which a top N report will be
+ prepared on behalf of this entry. The alMatrix[SD/DS] table
+ is identified by the value of the hlMatrixControlIndex
+ for that table - that value is used here to identify the
+ particular table.
+
+ This object may not be modified if the associated
+ alMatrixTopNControlStatus object is equal to active(1)."
+ ::= { alMatrixTopNControlEntry 2 }
+
+alMatrixTopNControlRateBase OBJECT-TYPE
+ SYNTAX INTEGER {
+ alMatrixTopNTerminalsPkts(1),
+ alMatrixTopNTerminalsOctets(2),
+ alMatrixTopNAllPkts(3),
+ alMatrixTopNAllOctets(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The variable for each alMatrix[SD/DS] entry that the
+
+
+ alMatrixTopNEntries are sorted by, as well as the
+ selector of the view of the matrix table that will be
+ used.
+
+ The values alMatrixTopNTerminalsPkts and
+ alMatrixTopNTerminalsOctets cause collection only from
+ protocols that have no child protocols that are counted. The
+ values alMatrixTopNAllPkts and alMatrixTopNAllOctets cause
+ collection from all alMatrix entries.
+
+ This object may not be modified if the associated
+ alMatrixTopNControlStatus object is equal to active(1)."
+ ::= { alMatrixTopNControlEntry 3 }
+
+alMatrixTopNControlTimeRemaining OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds left in the report currently
+ being collected. When this object is modified by
+ the management station, a new collection is started,
+ possibly aborting a currently running report. The
+ new value is used as the requested duration of this
+ report, and is immediately loaded into the associated
+ alMatrixTopNControlDuration object.
+ When the report finishes, the probe will automatically
+ start another collection with the same initial value
+ of alMatrixTopNControlTimeRemaining. Thus the management
+ station may simply read the resulting reports repeatedly,
+ checking the startTime and duration each time to ensure that a
+ report was not missed or that the report parameters were not
+ changed.
+
+ While the value of this object is non-zero, it decrements
+ by one per second until it reaches zero. At the time
+ that this object decrements to zero, the report is made
+ accessible in the alMatrixTopNTable, overwriting any report
+ that may be there.
+
+ When this object is modified by the management station, any
+ associated entries in the alMatrixTopNTable shall be deleted.
+
+ (Note that this is a different algorithm than the one used in
+ the hostTopNTable)."
+ DEFVAL { 1800 }
+ ::= { alMatrixTopNControlEntry 4 }
+
+
+
+alMatrixTopNControlGeneratedReports OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of reports that have been generated by this entry."
+ ::= { alMatrixTopNControlEntry 5 }
+
+alMatrixTopNControlDuration OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that this report has collected
+ during the last sampling interval.
+
+ When the associated alMatrixTopNControlTimeRemaining object
+ is set, this object shall be set by the probe to the
+ same value and shall not be modified until the next
+ time the alMatrixTopNControlTimeRemaining is set.
+
+ This value shall be zero if no reports have been
+ requested for this alMatrixTopNControlEntry."
+ ::= { alMatrixTopNControlEntry 6 }
+
+alMatrixTopNControlRequestedSize OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of matrix entries requested for this report.
+
+ When this object is created or modified, the probe
+ should set alMatrixTopNControlGrantedSize as closely to this
+ object as is possible for the particular probe
+ implementation and available resources."
+ DEFVAL { 150 }
+ ::= { alMatrixTopNControlEntry 7 }
+
+alMatrixTopNControlGrantedSize OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of matrix entries in this report.
+
+ When the associated alMatrixTopNControlRequestedSize object
+ is created or modified, the probe should set this
+
+
+ object as closely to the requested value as is
+ possible for the particular implementation and
+ available resources. The probe must not lower this
+ value except as a result of a set to the associated
+ alMatrixTopNControlRequestedSize object.
+
+ If the value of alMatrixTopNControlRateBase is equal to
+ alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, when the
+ next topN report is generated, matrix entries with the highest
+ value of alMatrixTopNPktRate shall be placed in this table in
+ decreasing order of this rate until there is no more room or
+ until there are no more matrix entries.
+
+ If the value of alMatrixTopNControlRateBase is equal to
+ alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, when the
+ next topN report is generated, matrix entries with the highest
+ value of alMatrixTopNOctetRate shall be placed in this table
+ in decreasing order of this rate until there is no more room
+ or until there are no more matrix entries.
+
+ It is an implementation-specific matter how entries with the
+ same value of alMatrixTopNPktRate or alMatrixTopNOctetRate are
+ sorted. It is also an implementation-specific matter as to
+ whether or not zero-valued entries are available."
+ ::= { alMatrixTopNControlEntry 8 }
+
+alMatrixTopNControlStartTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this top N report was
+ last started. In other words, this is the time that
+ the associated alMatrixTopNControlTimeRemaining object
+ was modified to start the requested report or the time
+ the report was last automatically (re)started.
+
+ This object may be used by the management station to
+ determine if a report was missed or not."
+ ::= { alMatrixTopNControlEntry 9 }
+
+alMatrixTopNControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+
+
+ ::= { alMatrixTopNControlEntry 10 }
+
+alMatrixTopNControlStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this alMatrixTopNControlEntry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value.
+
+ If this object is not equal to active(1), all
+ associated entries in the alMatrixTopNTable shall be
+ deleted by the agent."
+ ::= { alMatrixTopNControlEntry 11 }
+
+alMatrixTopNTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlMatrixTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of statistics for those application layer matrix
+ entries that have counted the highest number of octets or
+ packets."
+ ::= { alMatrix 4 }
+
+alMatrixTopNEntry OBJECT-TYPE
+ SYNTAX AlMatrixTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the alMatrixTopNTable.
+
+ The alMatrixTopNControlIndex value in the index identifies
+ the alMatrixTopNControlEntry on whose behalf this entry was
+ created.
+
+ An example of the indexing of this table is
+ alMatrixTopNPktRate.3.10"
+ INDEX { alMatrixTopNControlIndex, alMatrixTopNIndex }
+ ::= { alMatrixTopNTable 1 }
+
+AlMatrixTopNEntry ::= SEQUENCE {
+ alMatrixTopNIndex Integer32,
+ alMatrixTopNProtocolDirLocalIndex Integer32,
+ alMatrixTopNSourceAddress OCTET STRING,
+ alMatrixTopNDestAddress OCTET STRING,
+
+
+ alMatrixTopNAppProtocolDirLocalIndex Integer32,
+ alMatrixTopNPktRate Gauge32,
+ alMatrixTopNReversePktRate Gauge32,
+ alMatrixTopNOctetRate Gauge32,
+ alMatrixTopNReverseOctetRate Gauge32
+ }
+
+alMatrixTopNIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in
+ the alMatrixTopNTable among those in the same report.
+ This index is between 1 and N, where N is the
+ number of entries in this report.
+
+ If the value of alMatrixTopNControlRateBase is equal to
+ alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, increasing
+ values of alMatrixTopNIndex shall be assigned to entries with
+ decreasing values of alMatrixTopNPktRate until index N is
+ assigned or there are no more alMatrixTopNEntries.
+
+ If the value of alMatrixTopNControlRateBase is equal to
+ alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets,
+ increasing values of alMatrixTopNIndex shall be assigned to
+ entries with decreasing values of alMatrixTopNOctetRate until
+ index N is assigned or there are no more alMatrixTopNEntries."
+ ::= { alMatrixTopNEntry 1 }
+
+alMatrixTopNProtocolDirLocalIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The protocolDirLocalIndex of the network layer protocol of
+ this entry's network address."
+ ::= { alMatrixTopNEntry 2 }
+
+alMatrixTopNSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network layer address of the source host in this
+ conversation.
+ This is represented as an octet string with
+ specific semantics and length as identified
+
+
+ by the associated alMatrixTopNProtocolDirLocalIndex.
+
+ For example, if the alMatrixTopNProtocolDirLocalIndex
+ indicates an encapsulation of ip, this object is encoded as a
+ length octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { alMatrixTopNEntry 3 }
+
+alMatrixTopNDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network layer address of the destination host in this
+ conversation.
+
+ This is represented as an octet string with
+ specific semantics and length as identified
+ by the associated alMatrixTopNProtocolDirLocalIndex.
+
+ For example, if the alMatrixTopNProtocolDirLocalIndex
+ indicates an encapsulation of ip, this object is encoded as a
+ length octet of 4, followed by the 4 octets of the ip address,
+ in network byte order."
+ ::= { alMatrixTopNEntry 4 }
+
+alMatrixTopNAppProtocolDirLocalIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the protocol counted by this matrix entry."
+ ::= { alMatrixTopNEntry 5 }
+
+alMatrixTopNPktRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets seen of this protocol from the source
+ host to the destination host during this sampling interval,
+ counted using the rules for counting the alMatrixSDPkts
+ object.
+
+ If the value of alMatrixTopNControlRateBase is
+ alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, this
+ variable will be used to sort this report."
+ ::= { alMatrixTopNEntry 6 }
+
+
+alMatrixTopNReversePktRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets seen of this protocol from the
+ destination host to the source host during this sampling
+ interval, counted using the rules for counting the
+ alMatrixDSPkts object (note that the corresponding
+ alMatrixSDPkts object selected is the one whose source address
+ is equal to alMatrixTopNDestAddress and whose destination
+ address is equal to alMatrixTopNSourceAddress.)
+
+ Note that if the value of alMatrixTopNControlRateBase is equal
+ to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, the sort
+ of topN entries is based entirely on alMatrixTopNPktRate, and
+ not on the value of this object."
+ ::= { alMatrixTopNEntry 7 }
+
+alMatrixTopNOctetRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets seen of this protocol from the source
+ host to the destination host during this sampling interval,
+ counted using the rules for counting the alMatrixSDOctets
+ object.
+
+ If the value of alMatrixTopNControlRateBase is
+ alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, this
+ variable will be used to sort this report."
+ ::= { alMatrixTopNEntry 8 }
+
+alMatrixTopNReverseOctetRate OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets seen of this protocol from the
+ destination host to the source host during this sampling
+ interval, counted using the rules for counting the
+ alMatrixDSOctets object (note that the corresponding
+ alMatrixSDOctets object selected is the one whose source
+ address is equal to alMatrixTopNDestAddress and whose
+ destination address is equal to alMatrixTopNSourceAddress.)
+
+ Note that if the value of alMatrixTopNControlRateBase is equal
+
+
+ to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, the
+ sort of topN entries is based entirely on
+ alMatrixTopNOctetRate, and not on the value of this object."
+ ::= { alMatrixTopNEntry 9 }
+
+--
+-- User History Collection Group (usrHistory)
+--
+-- The usrHistory group combines mechanisms seen in the alarm and
+-- history groups to provide user-specified history collection,
+-- utilizing two additional control tables and one additional data
+-- table. This function has traditionally been done by NMS
+-- applications, via periodic polling. The usrHistory group allows
+-- this task to be offloaded to an RMON probe.
+--
+-- Data (an ASN.1 INTEGER based object) is collected in the same
+-- manner as any history data table (e.g. etherHistoryTable) except
+-- that the user specifies the MIB instances to be collected. Objects
+-- are collected in bucket-groups, with the intent that all MIB
+-- instances in the same bucket-group are collected as atomically as
+-- possible by the RMON probe.
+--
+-- The usrHistoryControlTable is a one-dimensional read-create table.
+-- Each row configures a collection of user history buckets, much
+-- the same as a historyControlEntry, except that the creation of a
+-- row in this table will cause one or more associated instances in
+-- the usrHistoryObjectTable to be created. The user specifies the
+-- number of bucket elements (rows in the usrHistoryObjectTable)
+-- requested, as well as the number of buckets requested.
+--
+-- The usrHistoryObjectTable is a 2-d read-write table.
+-- Each row configures a single MIB instance to be collected.
+-- All rows with the same major index constitute a bucket-group.
+--
+-- The usrHistoryTable is a 3-d read-only table containing
+-- the data of associated usrHistoryControlEntries. Each
+-- entry represents the value of a single MIB instance
+-- during a specific sampling interval (or the rate of
+-- change during the interval).
+--
+-- A sample value is stored in two objects - an absolute value and
+-- a status object. This allows numbers from -(2G-1) to +4G to be
+-- stored. The status object also indicates whether a sample is
+-- valid. This allows data collection to continue if periodic
+-- retrieval of a particular instance fails for any reason.
+--
+-- Row Creation Order Relationships
+--
+
+
+-- The static nature of the usrHistoryObjectTable creates
+-- some row creation/modification issues. The rows in this
+-- table need to be set before the associated
+-- usrHistoryControlEntry can be activated.
+--
+-- Note that the usrHistoryObject entries associated with a
+-- particular usrHistoryControlEntry are not required to
+-- be active before the control entry is activated. However,
+-- the usrHistory data entries associated with an inactive
+-- usrHistoryObject entry will be inactive (i.e.
+-- usrHistoryValStatus == valueNotAvailable).
+--
+
+usrHistoryControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UsrHistoryControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of data-collection configuration entries."
+ ::= { usrHistory 1 }
+
+usrHistoryControlEntry OBJECT-TYPE
+ SYNTAX UsrHistoryControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of parameters that set up a group of user-defined
+ MIB objects to be sampled periodically (called a
+ bucket-group).
+
+ For example, an instance of usrHistoryControlInterval
+ might be named usrHistoryControlInterval.1"
+ INDEX { usrHistoryControlIndex }
+ ::= { usrHistoryControlTable 1 }
+
+UsrHistoryControlEntry ::= SEQUENCE {
+ usrHistoryControlIndex Integer32,
+ usrHistoryControlObjects Integer32,
+ usrHistoryControlBucketsRequested Integer32,
+ usrHistoryControlBucketsGranted Integer32,
+ usrHistoryControlInterval Integer32,
+ usrHistoryControlOwner OwnerString,
+ usrHistoryControlStatus RowStatus
+}
+
+usrHistoryControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+
+
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ usrHistoryControlTable. Each such entry defines a
+ set of samples at a particular interval for a specified
+ set of MIB instances available from the managed system."
+ ::= { usrHistoryControlEntry 1 }
+
+usrHistoryControlObjects OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of MIB objects to be collected
+ in the portion of usrHistoryTable associated with this
+ usrHistoryControlEntry.
+
+ This object may not be modified if the associated instance
+ of usrHistoryControlStatus is equal to active(1)."
+ ::= { usrHistoryControlEntry 2 }
+
+usrHistoryControlBucketsRequested OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The requested number of discrete time intervals
+ over which data is to be saved in the part of the
+ usrHistoryTable associated with this usrHistoryControlEntry.
+
+ When this object is created or modified, the probe
+ should set usrHistoryControlBucketsGranted as closely to
+ this object as is possible for the particular probe
+ implementation and available resources."
+ DEFVAL { 50 }
+ ::= { usrHistoryControlEntry 3 }
+
+usrHistoryControlBucketsGranted OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of discrete sampling intervals
+ over which data shall be saved in the part of
+ the usrHistoryTable associated with this
+ usrHistoryControlEntry.
+
+ When the associated usrHistoryControlBucketsRequested
+
+
+ object is created or modified, the probe should set
+ this object as closely to the requested value as is
+ possible for the particular probe implementation and
+ available resources. The probe must not lower this
+ value except as a result of a modification to the associated
+ usrHistoryControlBucketsRequested object.
+
+ The associated usrHistoryControlBucketsRequested object
+ should be set before or at the same time as this object
+ to allow the probe to accurately estimate the resources
+ required for this usrHistoryControlEntry.
+
+ There will be times when the actual number of buckets
+ associated with this entry is less than the value of
+ this object. In this case, at the end of each sampling
+ interval, a new bucket will be added to the usrHistoryTable.
+
+ When the number of buckets reaches the value of this object
+ and a new bucket is to be added to the usrHistoryTable,
+ the oldest bucket associated with this usrHistoryControlEntry
+ shall be deleted by the agent so that the new bucket can be
+ added.
+
+ When the value of this object changes to a value less than
+ the current value, entries are deleted from the
+ usrHistoryTable associated with this usrHistoryControlEntry.
+ Enough of the oldest of these entries shall be deleted by the
+ agent so that their number remains less than or equal to the
+ new value of this object.
+
+ When the value of this object changes to a value greater
+ than the current value, the number of associated usrHistory
+ entries may be allowed to grow."
+ ::= { usrHistoryControlEntry 4 }
+
+
+usrHistoryControlInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interval in seconds over which the data is
+ sampled for each bucket in the part of the usrHistory
+ table associated with this usrHistoryControlEntry.
+
+ Because the counters in a bucket may overflow at their
+ maximum value with no indication, a prudent manager will
+ take into account the possibility of overflow in any of
+
+
+ the associated counters. It is important to consider the
+ minimum time in which any counter could overflow on a
+ particular media type and set the usrHistoryControlInterval
+ object to a value less than this interval.
+
+ This object may not be modified if the associated
+ usrHistoryControlStatus object is equal to active(1)."
+ DEFVAL { 1800 }
+ ::= { usrHistoryControlEntry 5 }
+
+usrHistoryControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { usrHistoryControlEntry 6 }
+
+usrHistoryControlStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this variable history control entry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value.
+
+ If this object is not equal to active(1), all associated
+ entries in the usrHistoryTable shall be deleted."
+ ::= { usrHistoryControlEntry 7 }
+
+-- Object table
+
+usrHistoryObjectTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UsrHistoryObjectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of data-collection configuration entries."
+ ::= { usrHistory 2 }
+
+usrHistoryObjectEntry OBJECT-TYPE
+ SYNTAX UsrHistoryObjectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+
+ "A list of MIB instances to be sampled periodically.
+
+ Entries in this table are created when an associated
+ usrHistoryControlObjects object is created.
+
+ The usrHistoryControlIndex value in the index is
+ that of the associated usrHistoryControlEntry.
+
+ For example, an instance of usrHistoryObjectVariable might be
+ usrHistoryObjectVariable.1.3"
+ INDEX { usrHistoryControlIndex, usrHistoryObjectIndex }
+ ::= { usrHistoryObjectTable 1 }
+
+UsrHistoryObjectEntry ::= SEQUENCE {
+ usrHistoryObjectIndex Integer32,
+ usrHistoryObjectVariable OBJECT IDENTIFIER,
+ usrHistoryObjectSampleType INTEGER
+}
+
+usrHistoryObjectIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index used to uniquely identify an entry in the
+ usrHistoryObject table. Each such entry defines a
+ MIB instance to be collected periodically."
+ ::= { usrHistoryObjectEntry 1 }
+
+
+usrHistoryObjectVariable OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object identifier of the particular variable to be
+ sampled.
+
+ Only variables that resolve to an ASN.1 primitive type of
+ Integer32 (Integer32, Counter, Gauge, or TimeTicks) may be
+ sampled.
+
+ Because SNMP access control is articulated entirely in terms
+ of the contents of MIB views, no access control mechanism
+ exists that can restrict the value of this object to identify
+ only those objects that exist in a particular MIB view.
+ Because there is thus no acceptable means of restricting the
+ read access that could be obtained through the user history
+
+
+ mechanism, the probe must only grant write access to this
+ object in those views that have read access to all objects on
+ the probe.
+
+ During a set operation, if the supplied variable name is not
+ available in the selected MIB view, a badValue error must be
+ returned.
+
+ This object may not be modified if the associated
+ usrHistoryControlStatus object is equal to active(1)."
+ ::= { usrHistoryObjectEntry 2 }
+
+usrHistoryObjectSampleType OBJECT-TYPE
+ SYNTAX INTEGER {
+ absoluteValue(1),
+ deltaValue(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The method of sampling the selected variable for storage in
+ the usrHistoryTable.
+
+ If the value of this object is absoluteValue(1), the value of
+ the selected variable will be copied directly into the history
+ bucket.
+
+ If the value of this object is deltaValue(2), the value of the
+ selected variable at the last sample will be subtracted from
+ the current value, and the difference will be stored in the
+ history bucket. If the associated usrHistoryObjectVariable
+ instance could not be obtained at the previous sample
+ interval, then a delta sample is not possible, and the value
+ of the associated usrHistoryValStatus object for this interval
+ will be valueNotAvailable(1).
+
+ This object may not be modified if the associated
+ usrHistoryControlStatus object is equal to active(1)."
+ ::= { usrHistoryObjectEntry 3 }
+
+-- data table
+
+usrHistoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UsrHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of user defined history entries."
+
+
+ ::= { usrHistory 3 }
+
+usrHistoryEntry OBJECT-TYPE
+ SYNTAX UsrHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A historical sample of user-defined variables. This sample
+ is associated with the usrHistoryControlEntry which set up the
+ parameters for a regular collection of these samples.
+
+ The usrHistoryControlIndex value in the index identifies the
+ usrHistoryControlEntry on whose behalf this entry was created.
+
+ The usrHistoryObjectIndex value in the index identifies the
+ usrHistoryObjectEntry on whose behalf this entry was created.
+
+ For example, an instance of usrHistoryAbsValue, which represents
+ the 14th sample of a variable collected as specified by
+ usrHistoryControlEntry.1 and usrHistoryObjectEntry.1.5,
+ would be named usrHistoryAbsValue.1.14.5"
+ INDEX { usrHistoryControlIndex, usrHistorySampleIndex,
+ usrHistoryObjectIndex }
+ ::= { usrHistoryTable 1 }
+
+UsrHistoryEntry ::= SEQUENCE {
+ usrHistorySampleIndex Integer32,
+ usrHistoryIntervalStart TimeStamp,
+ usrHistoryIntervalEnd TimeStamp,
+ usrHistoryAbsValue Gauge32,
+ usrHistoryValStatus INTEGER
+}
+
+usrHistorySampleIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies the particular sample this
+ entry represents among all samples associated with the same
+ usrHistoryControlEntry. This index starts at 1 and increases
+ by one as each new sample is taken."
+ ::= { usrHistoryEntry 1 }
+
+usrHistoryIntervalStart OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+
+
+ DESCRIPTION
+ "The value of sysUpTime at the start of the interval over
+ which this sample was measured. If the probe keeps track of
+ the time of day, it should start the first sample of the
+ history at a time such that when the next hour of the day
+ begins, a sample is started at that instant.
+
+ Note that following this rule may require the probe to delay
+ collecting the first sample of the history, as each sample
+ must be of the same interval. Also note that the sample which
+ is currently being collected is not accessible in this table
+ until the end of its interval."
+ ::= { usrHistoryEntry 2 }
+
+usrHistoryIntervalEnd OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the end of the interval over which
+ this sample was measured."
+ ::= { usrHistoryEntry 3 }
+
+usrHistoryAbsValue OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The absolute value (i.e. unsigned value) of the
+ user-specified statistic during the last sampling period. The
+ value during the current sampling period is not made available
+ until the period is completed.
+
+ To obtain the true value for this sampling interval, the
+ associated instance of usrHistoryValStatus must be checked,
+ and usrHistoryAbsValue adjusted as necessary.
+
+ If the MIB instance could not be accessed during the sampling
+ interval, then this object will have a value of zero and the
+ associated instance of usrHistoryValStatus will be set to
+ 'valueNotAvailable(1)'."
+ ::= { usrHistoryEntry 4 }
+
+
+usrHistoryValStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ valueNotAvailable(1),
+ valuePositive(2),
+
+
+ valueNegative(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the validity and sign of the data in
+ the associated instance of usrHistoryAbsValue.
+
+ If the MIB instance could not be accessed during the sampling
+ interval, then 'valueNotAvailable(1)' will be returned.
+
+ If the sample is valid and actual value of the sample is
+ greater than or equal to zero then 'valuePositive(2)' is
+ returned.
+
+ If the sample is valid and the actual value of the sample is
+ less than zero, 'valueNegative(3)' will be returned. The
+ associated instance of usrHistoryAbsValue should be multiplied
+ by -1 to obtain the true sample value."
+ ::= { usrHistoryEntry 5 }
+
+-- The Probe Configuration Group
+--
+-- This group controls the configuration of various operating
+-- parameters of the probe.
+
+ControlString ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This data type is used to communicate with a modem or a
+ serial data switch. A ControlString contains embedded
+ commands to control how the device will interact with the
+ remote device through the serial interface. Commands are
+ represented as two character sequences beginning with
+ the `^' character.
+
+ The following commands are recognized by the device (note
+ that command characters are case sensitive):
+
+ ^s Send string that follows which is terminated by the
+ next command or the end of string.
+ ^c Delay for the number of seconds that follows. Toss
+ out any data received rather than storing it in a
+ buffer for parsing.
+ ^t Set timeout to the value represented by the decimal
+ digits that follow. The default timeout is 20
+ seconds. Note that this timeout may be overridden
+ by a smaller serialTimeout configured for the
+
+
+ associated serial interface (see serialConfigTable).
+ ^w Wait for the reply string that follows which is
+ terminated by the next command or the end of string.
+ Partial and case insensitive matching is applied, ie.
+ if the reply string (any case combination) is found
+ anywhere in the received string, then the a match is
+ found. If the current timeout elapses without a match,
+ then the remaining control string is ignored.
+ ^! The ^ character.
+ ^d Delay the number of seconds specified by the decimal
+ digits that follow.
+ ^b Send break for the number of milliseconds specified by
+ the decimal digits that follow. If no digits follow,
+ break will be enforced for 250 milliseconds by default.
+
+ The following ASCII control characters may be inserted into
+ the `^s' send string or the `^w' reply string:
+
+ ^@ 0x00
+ ^A 0x01
+ ..
+ ^M 0x0D
+ ..
+ ^Z 0x1A
+ ^[ 0x1B
+ ^ 0x1C
+ ^] 0x1D
+ ^^ 0x1E
+ ^_ 0x1F
+
+ Binary data may also be inserted into the data stream. The
+ control sequence for each byte of binary data is ^0x##, where
+ ## is the hexadecimal representation of the data byte. Two
+ ASCII characters (0-9, a-f, A-F) must follow the `^0x'
+ control prefix. For example, `^0x0D^0x0A' is interpreted as a
+ carriage return followed by a line feed."
+ SYNTAX DisplayString
+
+probeCapabilities OBJECT-TYPE
+ SYNTAX BITS {
+ etherStats(0),
+ historyControl(1),
+ etherHistory(2),
+ alarm(3),
+ hosts(4),
+ hostTopN(5),
+ matrix(6),
+ filter(7),
+
+
+ capture(8),
+ event(9),
+ tokenRingMLStats(10),
+ tokenRingPStats(11),
+ tokenRingMLHistory(12),
+ tokenRingPHistory(13),
+ ringStation(14),
+ ringStationOrder(15),
+ ringStationConfig(16),
+ sourceRouting(17),
+ protocolDirectory(18),
+ protocolDistribution(19),
+ addressMapping(20),
+ nlHost(21),
+ nlMatrix(22),
+ alHost(23),
+ alMatrix(24),
+ usrHistory(25),
+ probeConfig(26)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication of the RMON MIB groups supported
+ on at least one interface by this probe."
+ ::= { probeConfig 1 }
+
+probeSoftwareRev OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..15))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The software revision of this device. This string will have
+ a zero length if the revision is unknown."
+ ::= { probeConfig 2 }
+
+probeHardwareRev OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..31))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The hardware revision of this device. This string will have
+ a zero length if the revision is unknown."
+ ::= { probeConfig 3 }
+
+probeDateTime OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0 | 8 | 11))
+ MAX-ACCESS read-write
+
+
+ STATUS current
+ DESCRIPTION
+ "Probe's current date and time.
+
+ field octets contents range
+ ----- ------ -------- -----
+ 1 1-2 year 0..65536
+ 2 3 month 1..12
+ 3 4 day 1..31
+ 4 5 hour 0..23
+ 5 6 minutes 0..59
+ 6 7 seconds 0..60
+ (use 60 for leap-second)
+ 7 8 deci-seconds 0..9
+ 8 9 direction from UTC '+' / '-'
+ 9 10 hours from UTC 0..11
+ 10 11 minutes from UTC 0..59
+
+ For example, Tuesday May 26, 1992 at 1:30:15 PM
+ EDT would be displayed as:
+
+ 1992-5-26,13:30:15.0,-4:0
+
+ Note that if only local time is known, then
+ timezone information (fields 8-10) is not
+ present, and if no time information is known, the null
+ string is returned."
+ ::= { probeConfig 4 }
+
+probeResetControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ running(1),
+ warmBoot(2),
+ coldBoot(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting this object to warmBoot(2) causes the device to
+ restart the application software with current configuration
+ parameters saved in non-volatile memory. Setting this
+ object to coldBoot(3) causes the device to reinitialize
+ configuration parameters in non-volatile memory to default
+ values and restart the application software. When the device
+ is running normally, this variable has a value of
+ running(1)."
+ ::= { probeConfig 5 }
+
+
+
+-- The following download objects do not restrict an implementation
+-- from implementing additional download mechanisms (controlled in an
+-- implementation-specific manner). Further, in the case where the RMON
+-- agent shares a processor with other types of systems, the
+-- implementation is not required to download those non-RMON functions
+-- with this mechanism.
+
+probeDownloadFile OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The file name to be downloaded from the TFTP server when a
+ download is next requested via this MIB. This value is set to
+ the zero length string when no file name has been specified."
+ ::= { probeConfig 6 }
+
+probeDownloadTFTPServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address of the TFTP server that contains the boot
+ image to load when a download is next requested via this MIB.
+ This value is set to `0.0.0.0' when no IP address has been
+ specified."
+ ::= { probeConfig 7 }
+
+probeDownloadAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ notDownloading(1),
+ downloadToPROM(2),
+ downloadToRAM(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When this object is set to downloadToRAM(2) or
+ downloadToPROM(3), the device will discontinue its
+ normal operation and begin download of the image specified
+ by probeDownloadFile from the server specified by
+ probeDownloadTFTPServer using the TFTP protocol. If
+ downloadToRAM(2) is specified, the new image is copied
+ to RAM only (the old image remains unaltered in the flash
+ EPROM). If downloadToPROM(3) is specified
+ the new image is written to the flash EPROM
+ memory after its checksum has been verified to be correct.
+ When the download process is completed, the device will
+
+
+ warm boot to restart the newly loaded application.
+ When the device is not downloading, this object will have
+ a value of notDownloading(1)."
+ ::= { probeConfig 8 }
+
+probeDownloadStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ downloadSuccess(1),
+ downloadStatusUnknown(2),
+ downloadGeneralError(3),
+ downloadNoResponseFromServer(4),
+ downloadChecksumError(5),
+ downloadIncompatibleImage(6),
+ downloadTftpFileNotFound(7),
+ downloadTftpAccessViolation(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of the last download procedure, if any. This
+ object will have a value of downloadStatusUnknown(2) if no
+ download process has been performed."
+ ::= { probeConfig 9 }
+
+serialConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SerialConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of serial interface configuration entries. This data
+ will be stored in non-volatile memory and preserved across
+ probe resets or power loss."
+ ::= { probeConfig 10 }
+
+serialConfigEntry OBJECT-TYPE
+ SYNTAX SerialConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of configuration parameters for a particular
+ serial interface on this device. If the device has no serial
+ interfaces, this table is empty.
+
+ The index is composed of the ifIndex assigned to this serial
+ line interface."
+ INDEX { ifIndex }
+ ::= { serialConfigTable 1 }
+
+
+
+SerialConfigEntry ::= SEQUENCE {
+ serialMode INTEGER,
+ serialProtocol INTEGER,
+ serialTimeout Integer32 (1..65535),
+ serialModemInitString ControlString (SIZE (0..255)),
+ serialModemHangUpString ControlString (SIZE (0..255)),
+ serialModemConnectResp DisplayString (SIZE (0..255)),
+ serialModemNoConnectResp DisplayString (SIZE (0..255)),
+ serialDialoutTimeout Integer32 (1..65535),
+ serialStatus RowStatus
+}
+
+serialMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ direct(1),
+ modem(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of incoming connection to expect on this serial
+ interface."
+ DEFVAL { direct }
+ ::= { serialConfigEntry 1 }
+
+serialProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ slip(2),
+ ppp(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of data link encapsulation to be used on this
+ serial interface."
+ DEFVAL { slip }
+ ::= { serialConfigEntry 2 }
+
+serialTimeout OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This timeout value is used when the Management Station has
+ initiated the conversation over the serial link. This variable
+ represents the number of seconds of inactivity allowed before
+ terminating the connection on this serial interface. Use the
+
+
+ serialDialoutTimeout in the case where the probe has initiated
+ the connection for the purpose of sending a trap."
+ DEFVAL { 300 }
+ ::= { serialConfigEntry 3 }
+
+serialModemInitString OBJECT-TYPE
+ SYNTAX ControlString (SIZE (0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A control string which controls how a modem attached to this
+ serial interface should be initialized. The initialization
+ is performed once during startup and again after each
+ connection is terminated if the associated serialMode has the
+ value of modem(2).
+
+ A control string that is appropriate for a wide variety of
+ modems is: '^s^MATE0Q0V1X4 S0=1 S2=43^M'."
+ ::= { serialConfigEntry 4 }
+
+serialModemHangUpString OBJECT-TYPE
+ SYNTAX ControlString (SIZE (0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A control string which specifies how to disconnect a modem
+ connection on this serial interface. This object is only
+ meaningful if the associated serialMode has the value
+ of modem(2).
+ A control string that is appropriate for a wide variety of
+ modems is: '^d2^s+++^d2^sATH0^M^d2'."
+ ::= { serialConfigEntry 5 }
+
+serialModemConnectResp OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An ASCII string containing substrings that describe the
+ expected modem connection response code and associated bps
+ rate. The substrings are delimited by the first character
+ in the string, for example:
+ /CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/
+ CONNECT 4800/4800/CONNECT 9600/9600
+ will be interpreted as:
+ response code bps rate
+ CONNECT 300
+ CONNECT 1200 1200
+
+
+ CONNECT 2400 2400
+ CONNECT 4800 4800
+ CONNECT 9600 9600
+ The agent will use the information in this string to adjust
+ the bps rate of this serial interface once a modem connection
+ is established.
+
+ A value that is appropriate for a wide variety of modems is:
+ '/CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/
+ CONNECT 4800/4800/CONNECT 9600/9600/CONNECT 14400/14400/
+ CONNECT 19200/19200/CONNECT 38400/38400/'."
+ ::= { serialConfigEntry 6 }
+
+serialModemNoConnectResp OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An ASCII string containing response codes that may be
+ generated by a modem to report the reason why a connection
+ attempt has failed. The response codes are delimited by
+ the first character in the string, for example:
+ /NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/
+ If one of these response codes is received via this serial
+ interface while attempting to make a modem connection,
+ the agent will issue the hang up command as specified by
+ serialModemHangUpString.
+
+ A value that is appropriate for a wide variety of modems is:
+ '/NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/'."
+ ::= { serialConfigEntry 7 }
+
+serialDialoutTimeout OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This timeout value is used when the probe initiates the
+ serial connection with the intention of contacting a
+ management station. This variable represents the number
+ of seconds of inactivity allowed before terminating the
+ connection on this serial interface."
+ DEFVAL { 20 }
+ ::= { serialConfigEntry 8 }
+
+serialStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+
+
+ STATUS current
+ DESCRIPTION
+ "The status of this serialConfigEntry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value."
+ ::= { serialConfigEntry 9 }
+
+netConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NetConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of netConfigEntries."
+ ::= { probeConfig 11 }
+
+netConfigEntry OBJECT-TYPE
+ SYNTAX NetConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of configuration parameters for a particular
+ network interface on this device. If the device has no network
+ interface, this table is empty.
+
+ The index is composed of the ifIndex assigned to the
+ corresponding interface."
+ INDEX { ifIndex }
+ ::= { netConfigTable 1 }
+
+NetConfigEntry ::= SEQUENCE {
+ netConfigIPAddress IpAddress,
+ netConfigSubnetMask IpAddress,
+ netConfigStatus RowStatus
+}
+
+netConfigIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IP address of this Net interface. The default value
+ for this object is 0.0.0.0. If either the netConfigIPAddress
+ or netConfigSubnetMask are 0.0.0.0, then when the device
+ boots, it may use BOOTP to try to figure out what these
+ values should be. If BOOTP fails, before the device
+ can talk on the network, this value must be configured
+ (e.g., through a terminal attached to the device). If BOOTP is
+
+
+ used, care should be taken to not send BOOTP broadcasts too
+ frequently and to eventually send very infrequently if no
+ replies are received."
+ ::= { netConfigEntry 1 }
+
+netConfigSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The subnet mask of this Net interface. The default value
+ for this object is 0.0.0.0. If either the netConfigIPAddress
+ or netConfigSubnetMask are 0.0.0.0, then when the device
+ boots, it may use BOOTP to try to figure out what these
+ values should be. If BOOTP fails, before the device
+ can talk on the network, this value must be configured
+ (e.g., through a terminal attached to the device). If BOOTP is
+ used, care should be taken to not send BOOTP broadcasts too
+ frequently and to eventually send very infrequently if no
+ replies are received."
+ ::= { netConfigEntry 2 }
+
+netConfigStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this netConfigEntry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value."
+ ::= { netConfigEntry 3 }
+
+netDefaultGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IP Address of the default gateway. If this value is
+ undefined or unknown, it shall have the value 0.0.0.0."
+ ::= { probeConfig 12 }
+
+-- Trap Destination Table
+--
+-- This table defines the destination addresses for traps generated
+-- from the device. This table maps a community to one or more trap
+-- destination entries.
+--
+
+
+-- The same trap will be sent to all destinations specified in the
+-- entries that have the same trapDestCommunity as the eventCommunity
+-- (as defined by RMON MIB). Information in this table will be stored
+-- in non-volatile memory. If the device has gone through a hard
+-- restart, this information will be reset to its default state.
+
+trapDestTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TrapDestEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of trap destination entries."
+ ::= { probeConfig 13 }
+
+trapDestEntry OBJECT-TYPE
+ SYNTAX TrapDestEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entry includes a destination IP address to which to send
+ traps for this community."
+ INDEX { trapDestIndex }
+ ::= { trapDestTable 1 }
+
+TrapDestEntry ::= SEQUENCE {
+ trapDestIndex Integer32,
+ trapDestCommunity OCTET STRING,
+ trapDestProtocol INTEGER,
+ trapDestAddress OCTET STRING,
+ trapDestOwner OwnerString,
+ trapDestStatus RowStatus
+}
+
+trapDestIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies this trapDestEntry."
+ ::= { trapDestEntry 1 }
+
+trapDestCommunity OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..127))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A community to which this destination address belongs.
+ This entry is associated with any eventEntries in the RMON
+
+
+ MIB whose value of eventCommunity is equal to the value of
+ this object. Every time an associated event entry sends a
+ trap due to an event, that trap will be sent to each
+ address in the trapDestTable with a trapDestCommunity equal to
+ eventCommunity.
+
+ This object may not be modified if the associated
+ trapDestStatus object is equal to active(1)."
+ ::= { trapDestEntry 2 }
+
+trapDestProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ip(1),
+ ipx(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The protocol with which to send this trap."
+ ::= { trapDestEntry 3 }
+
+trapDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The address to send traps on behalf of this entry.
+
+ If the associated trapDestProtocol object is equal to ip(1),
+ the encoding of this object is the same as the snmpUDPAddress
+ textual convention in [RFC1906]:
+ -- for a SnmpUDPAddress of length 6:
+ --
+ -- octets contents encoding
+ -- 1-4 IP-address network-byte order
+ -- 5-6 UDP-port network-byte order
+
+ If the associated trapDestProtocol object is equal to ipx(2),
+ the encoding of this object is the same as the snmpIPXAddress
+ textual convention in [RFC1906]:
+ -- for a SnmpIPXAddress of length 12:
+ --
+ -- octets contents encoding
+ -- 1-4 network-number network-byte order
+ -- 5-10 physical-address network-byte order
+ -- 11-12 socket-number network-byte order
+
+ This object may not be modified if the associated
+
+
+ trapDestStatus object is equal to active(1)."
+ ::= { trapDestEntry 4 }
+
+trapDestOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { trapDestEntry 5 }
+
+trapDestStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this trap destination entry.
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value."
+ ::= { trapDestEntry 6 }
+
+-- Serial Connection Table
+--
+-- The device may communicate with a management station using
+-- SLIP. In order for the device to send traps via SLIP, it must
+-- be able to initiate a connection over the serial interface. The
+-- serialConnectionTable stores the parameters for such connection
+-- initiation.
+
+serialConnectionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SerialConnectionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of serialConnectionEntries."
+ ::= { probeConfig 14 }
+
+serialConnectionEntry OBJECT-TYPE
+ SYNTAX SerialConnectionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Configuration for a SLIP link over a serial line."
+ INDEX { serialConnectIndex }
+ ::= { serialConnectionTable 1 }
+
+
+
+SerialConnectionEntry ::= SEQUENCE {
+ serialConnectIndex Integer32,
+ serialConnectDestIpAddress IpAddress,
+ serialConnectType INTEGER,
+ serialConnectDialString ControlString,
+ serialConnectSwitchConnectSeq ControlString,
+ serialConnectSwitchDisconnectSeq ControlString,
+ serialConnectSwitchResetSeq ControlString,
+ serialConnectOwner OwnerString,
+ serialConnectStatus RowStatus
+}
+
+serialConnectIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A value that uniquely identifies this serialConnection
+ entry."
+ ::= { serialConnectionEntry 1 }
+
+serialConnectDestIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IP Address that can be reached at the other end of this
+ serial connection.
+ This object may not be modified if the associated
+ serialConnectStatus object is equal to active(1)."
+ ::= { serialConnectionEntry 2 }
+
+
+serialConnectType OBJECT-TYPE
+ SYNTAX INTEGER {
+ direct(1),
+ modem(2),
+ switch(3),
+ modemSwitch(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of outgoing connection to make. If this object
+ has the value direct(1), then a direct serial connection
+ is assumed. If this object has the value modem(2),
+ then serialConnectDialString will be used to make a modem
+ connection. If this object has the value switch(3),
+
+
+ then serialConnectSwitchConnectSeq will be used to establish
+ the connection over a serial data switch, and
+ serialConnectSwitchDisconnectSeq will be used to terminate
+ the connection. If this object has the value
+ modem-switch(4), then a modem connection will be made first
+ followed by the switch connection.
+
+ This object may not be modified if the associated
+ serialConnectStatus object is equal to active(1)."
+
+ DEFVAL { direct }
+ ::= { serialConnectionEntry 3 }
+
+serialConnectDialString OBJECT-TYPE
+ SYNTAX ControlString (SIZE(0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A control string which specifies how to dial the phone
+ number in order to establish a modem connection. The
+ string should include dialing prefix and suffix. For
+ example: ``^s^MATD9,888-1234^M'' will instruct the Probe
+ to send a carriage return followed by the dialing prefix
+ ``ATD'', the phone number ``9,888-1234'', and a carriage
+ return as the dialing suffix.
+ This object may not be modified if the associated
+ serialConnectStatus object is equal to active(1)."
+ ::= { serialConnectionEntry 4 }
+
+serialConnectSwitchConnectSeq OBJECT-TYPE
+ SYNTAX ControlString (SIZE(0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A control string which specifies how to establish a
+ data switch connection.
+ This object may not be modified if the associated
+ serialConnectStatus object is equal to active(1)."
+ ::= { serialConnectionEntry 5 }
+
+serialConnectSwitchDisconnectSeq OBJECT-TYPE
+ SYNTAX ControlString (SIZE(0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A control string which specifies how to terminate a
+ data switch connection.
+ This object may not be modified if the associated
+
+
+ serialConnectStatus object is equal to active(1)."
+ ::= { serialConnectionEntry 6 }
+
+serialConnectSwitchResetSeq OBJECT-TYPE
+ SYNTAX ControlString (SIZE(0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A control string which specifies how to reset a data
+ switch in the event of a timeout.
+ This object may not be modified if the associated
+ serialConnectStatus object is equal to active(1)."
+ ::= { serialConnectionEntry 7 }
+
+serialConnectOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is
+ therefore using the resources assigned to it."
+ ::= { serialConnectionEntry 8 }
+
+serialConnectStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this serialConnectionEntry.
+
+ If the manager attempts to set this object to active(1) when
+ the serialConnectType is set to modem(2) or modem-switch(4)
+ and the serialConnectDialString is a zero-length string or
+ cannot be correctly parsed as a ConnectString, the set
+ request will be rejected with badValue(3).
+
+ If the manager attempts to set this object to active(1) when
+ the serialConnectType is set to switch(3) or modem-switch(4)
+ and the serialConnectSwitchConnectSeq,
+ the serialConnectSwitchDisconnectSeq, or
+ the serialConnectSwitchResetSeq are zero-length strings
+ or cannot be correctly parsed as ConnectStrings, the set
+ request will be rejected with badValue(3).
+
+ An entry may not exist in the active state unless all
+ objects in the entry have an appropriate value."
+ ::= { serialConnectionEntry 9 }
+
+
+
+--
+-- Extensions to the RMON 1 MIB for RMON 2 devices
+--
+-- These extensions include the standard LastCreateTime Textual
+-- Convention for all control tables, as well as an augmentation of
+-- the filter entry that provides variable-length offsets into
+-- packets.
+
+
+-- Each of the following, except for filterDroppedFrames, is a
+-- read-only object which, if implemented, automatically appears when
+-- the RMON1 row it is associated with is created.
+
+etherStats2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF EtherStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { statistics 4 }
+
+etherStats2Entry OBJECT-TYPE
+ SYNTAX EtherStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { etherStatsEntry }
+ ::= { etherStats2Table 1 }
+
+EtherStats2Entry ::= SEQUENCE {
+ etherStatsDroppedFrames Counter32,
+ etherStatsCreateTime LastCreateTime
+}
+
+etherStatsDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+
+
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { etherStats2Entry 1 }
+
+etherStatsCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last
+ activated. This can be used by the management station to
+ ensure that the table has not been deleted and recreated
+ between polls."
+ ::= { etherStats2Entry 2 }
+
+historyControl2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF HistoryControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { history 5 }
+
+historyControl2Entry OBJECT-TYPE
+ SYNTAX HistoryControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { historyControlEntry }
+ ::= { historyControl2Table 1 }
+
+HistoryControl2Entry ::= SEQUENCE {
+ historyControlDroppedFrames Counter32
+}
+
+historyControlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+
+
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { historyControl2Entry 1 }
+
+hostControl2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { hosts 4 }
+
+hostControl2Entry OBJECT-TYPE
+ SYNTAX HostControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { hostControlEntry }
+ ::= { hostControl2Table 1 }
+
+HostControl2Entry ::= SEQUENCE {
+ hostControlDroppedFrames Counter32,
+ hostControlCreateTime LastCreateTime
+}
+
+hostControlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+
+
+ ::= { hostControl2Entry 1 }
+
+hostControlCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last
+ activated. This can be used by the management station to
+ ensure that the table has not been deleted and recreated
+ between polls."
+ ::= { hostControl2Entry 2 }
+
+matrixControl2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF MatrixControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { matrix 4 }
+
+matrixControl2Entry OBJECT-TYPE
+ SYNTAX MatrixControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { matrixControlEntry }
+ ::= { matrixControl2Table 1 }
+
+MatrixControl2Entry ::= SEQUENCE {
+ matrixControlDroppedFrames Counter32,
+ matrixControlCreateTime LastCreateTime
+}
+
+matrixControlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+
+
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { matrixControl2Entry 1 }
+
+matrixControlCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last
+ activated. This can be used by the management station to
+ ensure that the table has not been deleted and recreated
+ between polls."
+ ::= { matrixControl2Entry 2 }
+
+channel2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF Channel2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { filter 3 }
+
+channel2Entry OBJECT-TYPE
+ SYNTAX Channel2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { channelEntry }
+ ::= { channel2Table 1 }
+
+Channel2Entry ::= SEQUENCE {
+ channelDroppedFrames Counter32,
+ channelCreateTime LastCreateTime
+}
+
+channelDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+
+
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { channel2Entry 1 }
+
+channelCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last
+ activated. This can be used by the management station to
+ ensure that the table has not been deleted and recreated
+ between polls."
+ ::= { channel2Entry 2 }
+
+tokenRingMLStats2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF TokenRingMLStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { statistics 5 }
+
+tokenRingMLStats2Entry OBJECT-TYPE
+ SYNTAX TokenRingMLStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { tokenRingMLStatsEntry }
+ ::= { tokenRingMLStats2Table 1 }
+
+TokenRingMLStats2Entry ::= SEQUENCE {
+ tokenRingMLStatsDroppedFrames Counter32,
+ tokenRingMLStatsCreateTime LastCreateTime
+}
+
+tokenRingMLStatsDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { tokenRingMLStats2Entry 1 }
+
+tokenRingMLStatsCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last activated.
+ This can be used by the management station to ensure that the
+ table has not been deleted and recreated between polls."
+ ::= { tokenRingMLStats2Entry 2 }
+
+tokenRingPStats2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF TokenRingPStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { statistics 6 }
+
+tokenRingPStats2Entry OBJECT-TYPE
+ SYNTAX TokenRingPStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { tokenRingPStatsEntry }
+ ::= { tokenRingPStats2Table 1 }
+
+TokenRingPStats2Entry ::= SEQUENCE {
+ tokenRingPStatsDroppedFrames Counter32,
+ tokenRingPStatsCreateTime LastCreateTime
+}
+
+tokenRingPStatsDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { tokenRingPStats2Entry 1 }
+
+tokenRingPStatsCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last activated.
+ This can be used by the management station to ensure that the
+ table has not been deleted and recreated between polls."
+ ::= { tokenRingPStats2Entry 2 }
+
+ringStationControl2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF RingStationControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { tokenRing 7 }
+
+ringStationControl2Entry OBJECT-TYPE
+ SYNTAX RingStationControl2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { ringStationControlEntry }
+ ::= { ringStationControl2Table 1 }
+
+RingStationControl2Entry ::= SEQUENCE {
+ ringStationControlDroppedFrames Counter32,
+ ringStationControlCreateTime LastCreateTime
+}
+
+
+ringStationControlDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { ringStationControl2Entry 1 }
+
+ringStationControlCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last activated.
+ This can be used by the management station to ensure that the
+ table has not been deleted and recreated between polls."
+ ::= { ringStationControl2Entry 2 }
+
+sourceRoutingStats2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF SourceRoutingStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ ::= { tokenRing 8 }
+
+sourceRoutingStats2Entry OBJECT-TYPE
+ SYNTAX SourceRoutingStats2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Contains the RMON-2 augmentations to RMON-1."
+ AUGMENTS { sourceRoutingStatsEntry }
+ ::= { sourceRoutingStats2Table 1 }
+
+SourceRoutingStats2Entry ::= SEQUENCE {
+ sourceRoutingStatsDroppedFrames Counter32,
+
+
+ sourceRoutingStatsCreateTime LastCreateTime
+}
+
+sourceRoutingStatsDroppedFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of frames which were received by the probe
+ and therefore not accounted for in the *StatsDropEvents, but
+ for which the probe chose not to count for this entry for
+ whatever reason. Most often, this event occurs when the probe
+ is out of some resources and decides to shed load from this
+ collection.
+
+ This count does not include packets that were not counted
+ because they had MAC-layer errors.
+
+ Note that, unlike the dropEvents counter, this number is the
+ exact number of frames dropped."
+ ::= { sourceRoutingStats2Entry 1 }
+
+sourceRoutingStatsCreateTime OBJECT-TYPE
+ SYNTAX LastCreateTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this control entry was last activated.
+ This can be used by the management station to ensure that the
+ table has not been deleted and recreated between polls."
+ ::= { sourceRoutingStats2Entry 2 }
+
+filter2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF Filter2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Provides a variable-length packet filter feature to the
+ RMON-1 filter table."
+ ::= { filter 4 }
+
+filter2Entry OBJECT-TYPE
+ SYNTAX Filter2Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Provides a variable-length packet filter feature to the
+ RMON-1 filter table."
+
+
+ AUGMENTS { filterEntry }
+ ::= { filter2Table 1 }
+
+Filter2Entry ::= SEQUENCE {
+ filterProtocolDirDataLocalIndex Integer32,
+ filterProtocolDirLocalIndex Integer32
+}
+
+filterProtocolDirDataLocalIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "When this object is set to a non-zero value, the filter that
+ it is associated with performs the following operations on
+ every packet:
+
+ 1) - If the packet doesn't match the protocol directory entry
+ identified by this object, discard the packet and exit
+ (i.e., discard the packet if it is not of the identified
+ protocol).
+ 2) - If the associated filterProtocolDirLocalIndex is non-zero
+ and the packet doesn't match the protocol directory
+ entry identified by that object, discard the packet and
+ exit
+ 3) - If the packet matches, perform the regular filter
+ algorithm as if the beginning of this named protocol is
+ the beginning of the packet, potentially applying the
+ filterOffset value to move further into the packet."
+ DEFVAL { 0 }
+ ::= { filter2Entry 1 }
+
+filterProtocolDirLocalIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "When this object is set to a non-zero value, the filter that
+ it is associated with will discard the packet if the packet
+ doesn't match this protocol directory entry."
+ DEFVAL { 0 }
+ ::= { filter2Entry 2 }
+
+-- Conformance Macros
+
+rmon2MIBCompliances OBJECT IDENTIFIER ::= { rmonConformance 1 }
+rmon2MIBGroups OBJECT IDENTIFIER ::= { rmonConformance 2 }
+
+
+
+rmon2MIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Describes the requirements for conformance to
+ the RMON2 MIB"
+ MODULE -- this module
+ MANDATORY-GROUPS { protocolDirectoryGroup,
+ protocolDistributionGroup,
+ addressMapGroup,
+ nlHostGroup,
+ nlMatrixGroup,
+ usrHistoryGroup,
+ probeInformationGroup }
+
+ GROUP rmon1EnhancementGroup
+ DESCRIPTION
+ "The rmon1EnhancementGroup is mandatory for systems which
+ implement RMON [RFC1757]"
+ ::= { rmon2MIBCompliances 1 }
+
+rmon2MIBApplicationLayerCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Describes the requirements for conformance to
+ the RMON2 MIB with Application Layer Enhancements."
+ MODULE -- this module
+ MANDATORY-GROUPS { protocolDirectoryGroup,
+ protocolDistributionGroup,
+ addressMapGroup,
+ nlHostGroup,
+ nlMatrixGroup,
+ alHostGroup,
+ alMatrixGroup,
+ usrHistoryGroup,
+ probeInformationGroup }
+
+ GROUP rmon1EnhancementGroup
+ DESCRIPTION
+ "The rmon1EnhancementGroup is mandatory for systems which
+ implement RMON [RFC1757]"
+ ::= { rmon2MIBCompliances 2 }
+
+
+protocolDirectoryGroup OBJECT-GROUP
+ OBJECTS { protocolDirLastChange,
+ protocolDirLocalIndex, protocolDirDescr,
+ protocolDirType, protocolDirAddressMapConfig,
+ protocolDirHostConfig, protocolDirMatrixConfig,
+
+
+ protocolDirOwner, protocolDirStatus }
+ STATUS current
+ DESCRIPTION
+ "Lists the inventory of protocols the probe has the capability
+ of monitoring and allows the addition, deletion, and
+ configuration of entries in this list."
+ ::= { rmon2MIBGroups 1 }
+
+protocolDistributionGroup OBJECT-GROUP
+ OBJECTS { protocolDistControlDataSource,
+ protocolDistControlDroppedFrames,
+ protocolDistControlCreateTime,
+ protocolDistControlOwner, protocolDistControlStatus,
+ protocolDistStatsPkts, protocolDistStatsOctets }
+ STATUS current
+ DESCRIPTION
+ "Collects the relative amounts of octets and packets for the
+ different protocols detected on a network segment."
+ ::= { rmon2MIBGroups 2 }
+
+addressMapGroup OBJECT-GROUP
+ OBJECTS { addressMapInserts, addressMapDeletes,
+ addressMapMaxDesiredEntries,
+ addressMapControlDataSource,
+ addressMapControlDroppedFrames,
+ addressMapControlOwner, addressMapControlStatus,
+ addressMapPhysicalAddress,
+ addressMapLastChange }
+ STATUS current
+ DESCRIPTION
+ "Lists MAC address to network address bindings discovered by
+ the probe and what interface they were last seen on."
+ ::= { rmon2MIBGroups 3 }
+
+nlHostGroup OBJECT-GROUP
+ OBJECTS { hlHostControlDataSource,
+ hlHostControlNlDroppedFrames, hlHostControlNlInserts,
+ hlHostControlNlDeletes,
+ hlHostControlNlMaxDesiredEntries,
+ hlHostControlAlDroppedFrames, hlHostControlAlInserts,
+ hlHostControlAlDeletes,
+ hlHostControlAlMaxDesiredEntries, hlHostControlOwner,
+ hlHostControlStatus, nlHostInPkts, nlHostOutPkts,
+ nlHostInOctets, nlHostOutOctets,
+ nlHostOutMacNonUnicastPkts, nlHostCreateTime }
+ STATUS current
+ DESCRIPTION
+ "Counts the amount of traffic sent from and to each network
+
+
+ address discovered by the probe. Note that while the
+ hlHostControlTable also has objects that control an optional
+ alHostTable, implementation of the alHostTable is not required
+ to fully implement this group."
+ ::= { rmon2MIBGroups 4 }
+
+nlMatrixGroup OBJECT-GROUP
+ OBJECTS { hlMatrixControlDataSource,
+ hlMatrixControlNlDroppedFrames,
+ hlMatrixControlNlInserts, hlMatrixControlNlDeletes,
+ hlMatrixControlNlMaxDesiredEntries,
+ hlMatrixControlAlDroppedFrames,
+ hlMatrixControlAlInserts, hlMatrixControlAlDeletes,
+ hlMatrixControlAlMaxDesiredEntries,
+ hlMatrixControlOwner, hlMatrixControlStatus,
+ nlMatrixSDPkts, nlMatrixSDOctets, nlMatrixSDCreateTime,
+ nlMatrixDSPkts, nlMatrixDSOctets, nlMatrixDSCreateTime,
+ nlMatrixTopNControlMatrixIndex,
+ nlMatrixTopNControlRateBase,
+ nlMatrixTopNControlTimeRemaining,
+ nlMatrixTopNControlGeneratedReports,
+ nlMatrixTopNControlDuration,
+ nlMatrixTopNControlRequestedSize,
+ nlMatrixTopNControlGrantedSize,
+ nlMatrixTopNControlStartTime,
+ nlMatrixTopNControlOwner, nlMatrixTopNControlStatus,
+ nlMatrixTopNProtocolDirLocalIndex,
+ nlMatrixTopNSourceAddress, nlMatrixTopNDestAddress,
+ nlMatrixTopNPktRate, nlMatrixTopNReversePktRate,
+ nlMatrixTopNOctetRate, nlMatrixTopNReverseOctetRate }
+ STATUS current
+ DESCRIPTION
+ "Counts the amount of traffic sent between each pair of
+ network addresses discovered by the probe. Note that while the
+ hlMatrixControlTable also has objects that control optional
+ alMatrixTables, implementation of the alMatrixTables is not
+ required to fully implement this group."
+ ::= { rmon2MIBGroups 5 }
+
+alHostGroup OBJECT-GROUP
+ OBJECTS { alHostInPkts, alHostOutPkts,
+ alHostInOctets, alHostOutOctets, alHostCreateTime }
+ STATUS current
+ DESCRIPTION
+ "Counts the amount of traffic, by protocol, sent from and to
+ each network address discovered by the probe. Implementation
+ of this group requires implementation of the Network Layer
+ Host Group."
+
+
+ ::= { rmon2MIBGroups 6 }
+
+alMatrixGroup OBJECT-GROUP
+ OBJECTS { alMatrixSDPkts, alMatrixSDOctets, alMatrixSDCreateTime,
+ alMatrixDSPkts, alMatrixDSOctets, alMatrixDSCreateTime,
+ alMatrixTopNControlMatrixIndex,
+ alMatrixTopNControlRateBase,
+ alMatrixTopNControlTimeRemaining,
+ alMatrixTopNControlGeneratedReports,
+ alMatrixTopNControlDuration,
+ alMatrixTopNControlRequestedSize,
+ alMatrixTopNControlGrantedSize,
+ alMatrixTopNControlStartTime,
+ alMatrixTopNControlOwner, alMatrixTopNControlStatus,
+ alMatrixTopNProtocolDirLocalIndex,
+ alMatrixTopNSourceAddress, alMatrixTopNDestAddress,
+ alMatrixTopNAppProtocolDirLocalIndex,
+ alMatrixTopNPktRate, alMatrixTopNReversePktRate,
+ alMatrixTopNOctetRate, alMatrixTopNReverseOctetRate }
+ STATUS current
+ DESCRIPTION
+ "Counts the amount of traffic, by protocol, sent between each
+ pair of network addresses discovered by the
+ probe. Implementation of this group requires implementation of
+ the Network Layer Matrix Group."
+ ::= { rmon2MIBGroups 7 }
+
+usrHistoryGroup OBJECT-GROUP
+ OBJECTS { usrHistoryControlObjects,
+ usrHistoryControlBucketsRequested,
+ usrHistoryControlBucketsGranted,
+ usrHistoryControlInterval,
+ usrHistoryControlOwner, usrHistoryControlStatus,
+ usrHistoryObjectVariable, usrHistoryObjectSampleType,
+ usrHistoryIntervalStart, usrHistoryIntervalEnd,
+ usrHistoryAbsValue, usrHistoryValStatus }
+ STATUS current
+ DESCRIPTION
+ "The usrHistoryGroup provides user-defined collection of
+ historical information from MIB objects on the probe."
+ ::= { rmon2MIBGroups 8 }
+
+probeInformationGroup OBJECT-GROUP
+ OBJECTS { probeCapabilities,
+ probeSoftwareRev, probeHardwareRev, probeDateTime }
+ STATUS current
+ DESCRIPTION
+ "This group describes various operating parameters of the
+
+
+ probe as well as controlling the local time of the probe."
+ ::= { rmon2MIBGroups 9 }
+
+probeConfigurationGroup OBJECT-GROUP
+ OBJECTS { probeResetControl, probeDownloadFile,
+ probeDownloadTFTPServer, probeDownloadAction,
+ probeDownloadStatus,
+ serialMode, serialProtocol, serialTimeout,
+ serialModemInitString, serialModemHangUpString,
+ serialModemConnectResp, serialModemNoConnectResp,
+ serialDialoutTimeout, serialStatus,
+ netConfigIPAddress, netConfigSubnetMask,
+ netConfigStatus, netDefaultGateway,
+ trapDestCommunity, trapDestProtocol, trapDestAddress,
+ trapDestOwner, trapDestStatus,
+ serialConnectDestIpAddress, serialConnectType,
+ serialConnectDialString, serialConnectSwitchConnectSeq,
+ serialConnectSwitchDisconnectSeq,
+ serialConnectSwitchResetSeq,
+ serialConnectOwner, serialConnectStatus }
+ STATUS current
+ DESCRIPTION
+ "This group controls the configuration of various operating
+ parameters of the probe."
+ ::= { rmon2MIBGroups 10 }
+
+rmon1EnhancementGroup OBJECT-GROUP
+ OBJECTS { historyControlDroppedFrames, hostControlDroppedFrames,
+ hostControlCreateTime, matrixControlDroppedFrames,
+ matrixControlCreateTime, channelDroppedFrames,
+ channelCreateTime, filterProtocolDirDataLocalIndex,
+ filterProtocolDirLocalIndex }
+ STATUS current
+ DESCRIPTION
+ "This group adds some enhancements to RMON-1 that help
+ management stations."
+ ::= { rmon2MIBGroups 11 }
+
+rmon1EthernetEnhancementGroup OBJECT-GROUP
+ OBJECTS { etherStatsDroppedFrames, etherStatsCreateTime }
+ STATUS current
+ DESCRIPTION
+ "This group adds some enhancements to RMON-1 that help
+ management stations."
+ ::= { rmon2MIBGroups 12 }
+
+rmon1TokenRingEnhancementGroup OBJECT-GROUP
+ OBJECTS { tokenRingMLStatsDroppedFrames,
+
+
+ tokenRingMLStatsCreateTime,
+ tokenRingPStatsDroppedFrames, tokenRingPStatsCreateTime,
+ ringStationControlDroppedFrames,
+ ringStationControlCreateTime,
+ sourceRoutingStatsDroppedFrames,
+ sourceRoutingStatsCreateTime }
+ STATUS current
+ DESCRIPTION
+ "This group adds some enhancements to RMON-1 that help
+ management stations."
+ ::= { rmon2MIBGroups 13 }
+END
+
+