The R13B03 release.OTP_R13B03

1 files changed, 264 insertions, 0 deletions

diff --git a/lib/ssh/src/ssh_connect.hrl b/lib/ssh/src/ssh_connect.hrl
new file mode 100755
index 0000000000..a5a4e42cd8
--- /dev/null
+++ b/lib/ssh/src/ssh_connect.hrl
@@ -0,0 +1,264 @@
+%%
+%% %CopyrightBegin%
+%% 
+%% Copyright Ericsson AB 2005-2009. All Rights Reserved.
+%% 
+%% The contents of this file are subject to the Erlang Public License,
+%% Version 1.1, (the "License"); you may not use this file except in
+%% compliance with the License. You should have received a copy of the
+%% Erlang Public License along with this software. If not, it can be
+%% retrieved online at http://www.erlang.org/.
+%% 
+%% Software distributed under the License is distributed on an "AS IS"
+%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+%% the License for the specific language governing rights and limitations
+%% under the License.
+%% 
+%% %CopyrightEnd%
+%%
+
+%%
+
+%%% Description : SSH connection protocol 
+
+-define(DEFAULT_PACKET_SIZE, 32768).
+-define(DEFAULT_WINDOW_SIZE, 2*?DEFAULT_PACKET_SIZE).
+-define(DEFAULT_TIMEOUT, 5000).
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%
+%% CONNECT messages
+%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+%%%----------------------------------------------------------------------
+%%% #   SSH_MSG_xxx
+%%% Description: Packet types used by the connection protocol.
+%%%----------------------------------------------------------------------
+-define(SSH_MSG_GLOBAL_REQUEST,  80).
+-define(SSH_MSG_REQUEST_SUCCESS,  81).
+-define(SSH_MSG_REQUEST_FAILURE,  82).
+-define(SSH_MSG_CHANNEL_OPEN,  90).
+-define(SSH_MSG_CHANNEL_OPEN_CONFIRMATION,  91).
+-define(SSH_MSG_CHANNEL_OPEN_FAILURE,  92).
+-define(SSH_MSG_CHANNEL_WINDOW_ADJUST,  93).
+-define(SSH_MSG_CHANNEL_DATA,  94).
+-define(SSH_MSG_CHANNEL_EXTENDED_DATA,  95).
+-define(SSH_MSG_CHANNEL_EOF,  96).
+-define(SSH_MSG_CHANNEL_CLOSE,  97).
+-define(SSH_MSG_CHANNEL_REQUEST,  98).
+-define(SSH_MSG_CHANNEL_SUCCESS,  99).
+-define(SSH_MSG_CHANNEL_FAILURE,  100).
+
+-record(ssh_msg_global_request,
+	{
+	  name,
+	  want_reply,
+	  data %% ...
+	 }).
+
+-record(ssh_msg_request_success,
+	{
+	  data  %% ...
+	 }).
+
+-record(ssh_msg_request_failure,
+	{
+	 }).
+
+
+-record(ssh_msg_channel_open,
+	{
+	  channel_type,
+	  sender_channel,
+	  initial_window_size,
+	  maximum_packet_size,
+	  data %% ...
+	 }).
+
+-record(ssh_msg_channel_open_confirmation,
+	{
+	  recipient_channel,
+	  sender_channel,
+	  initial_window_size,
+	  maximum_packet_size,
+	  data  %% ...
+	 }).
+
+
+%%%----------------------------------------------------------------------
+%%% #   SSH_OPEN_xxx
+%%% Description: Reason codes for SSH_MSG_OPEN_FAILURE packages.
+%%%----------------------------------------------------------------------
+
+-define(SSH_OPEN_ADMINISTRATIVELY_PROHIBITED,	1).
+-define(SSH_OPEN_CONNECT_FAILED,		2).
+-define(SSH_OPEN_UNKNOWN_CHANNEL_TYPE,		3).
+-define(SSH_OPEN_RESOURCE_SHORTAGE,		4).
+
+-record(ssh_msg_channel_open_failure,
+	{
+	  recipient_channel,
+	  reason,
+	  description,
+	  lang
+	 }).
+
+	 
+-record(ssh_msg_channel_window_adjust,
+	{
+	  recipient_channel,
+	  bytes_to_add
+	 }).
+
+-record(ssh_msg_channel_data,
+	{
+	  recipient_channel,
+	  data
+	 }).
+
+%%%----------------------------------------------------------------------
+%%% #   SSH_EXTENDED_DATA_xxx
+%%% Description: Type codes for SSH_MSG_CHANNEL_EXTENDED_DATA packages
+%%%----------------------------------------------------------------------
+-define(SSH_EXTENDED_DATA_DEFAULT, 0).
+-define(SSH_EXTENDED_DATA_STDERR,  1).
+
+-record(ssh_msg_channel_extended_data,
+	{
+	  recipient_channel,
+	  data_type_code,
+	  data
+	 }).
+
+-record(ssh_msg_channel_eof,
+	{
+	  recipient_channel
+	 }).
+
+-record(ssh_msg_channel_close,
+	{
+	  recipient_channel
+	 }).
+
+
+-record(ssh_msg_channel_request,
+	{
+	  recipient_channel,
+	  request_type,
+	  want_reply,
+	  data         %% ...
+	 }).
+
+
+-record(ssh_msg_channel_success,
+	{
+	  recipient_channel
+	 }).
+
+
+-record(ssh_msg_channel_failure,
+	{
+	  recipient_channel
+	 }).
+
+-define(TTY_OP_END,0).  %% Indicates end of options.
+-define(VINTR,1).       %% Interrupt character; 255 if none. Similarly for the
+			%% other characters. Not all of these characters are
+                        %% supported on all systems.
+-define(VQUIT,2).       %% The quit character (sends SIGQUIT signal on POSIX
+                        %%                    systems).
+-define(VERASE,3).      %% Erase the character to left of the cursor.
+-define(VKILL,4).       %% Kill the current input line.
+-define(VEOF,5).        %% End-of-file character (sends EOF from the terminal).
+-define(VEOL,6).        %% End-of-line character in addition to carriage return
+                        %% or,and). linefeed.
+-define(VEOL2,7).       %% Additional end-of-line character.
+-define(VSTART,8).      %% Continues paused output (normally control-Q).
+-define(VSTOP,9).       %% Pauses output (normally control-S).
+-define(VSUSP,10).      %% Suspends the current program.
+-define(VDSUSP,11).     %% Another suspend character.
+-define(VREPRINT,12).   %% Reprints the current input line.
+-define(VWERASE,13).    %% Erases a word left of cursor.
+-define(VLNEXT,14).     %% Enter the next character typed literally, even if it
+                        %% is a special character
+-define(VFLUSH,15).     %% Character to flush output.
+-define(VSWTCH,16).     %% Switch to a different shell layer.
+-define(VSTATUS,17).    %% Prints system status line (load, command, pid etc).
+-define(VDISCARD,18).   %% Toggles the flushing of terminal output.
+-define(IGNPAR,30).     %% The ignore parity flag.  The parameter SHOULD be 0 if
+                        %% this flag is FALSE set, and 1 if it is TRUE.
+-define(PARMRK,31).     %% Mark parity and framing errors.
+-define(INPCK,32).      %% Enable checking of parity errors.
+-define(ISTRIP,33).     %% Strip 8th bit off characters.
+-define(INLCR,34).      %% Map NL into CR on input.
+-define(IGNCR,35).      %% Ignore CR on input.
+-define(ICRNL,36).      %% Map CR to NL on input.
+-define(IUCLC,37).      %% Translate uppercase characters to lowercase.
+-define(IXON,38).       %% Enable output flow control.
+-define(IXANY,39).      %% Any char will restart after stop.
+-define(IXOFF,40).      %% Enable input flow control.
+-define(IMAXBEL,41).    %% Ring bell on input queue full.
+-define(ISIG,50).       %% Enable signals INTR, QUIT, [D]SUSP.
+-define(ICANON,51).     %% Canonicalize input lines.
+-define(XCASE,52).      %% Enable input and output of uppercase characters by
+                        %% preceding their lowercase equivalents with `\'.
+-define(ECHO,53).       %% Enable echoing.
+-define(ECHOE,54).      %% Visually erase chars.
+-define(ECHOK,55).      %% Kill character discards current line.
+-define(ECHONL,56).     %% Echo NL even if ECHO is off.
+-define(NOFLSH,57).     %% Don't flush after interrupt.
+-define(TOSTOP,58).     %% Stop background jobs from output.
+-define(IEXTEN,59).     %% Enable extensions.
+-define(ECHOCTL,60).    %% Echo control characters as ^(Char).
+-define(ECHOKE,61).     %% Visual erase for line kill.
+-define(PENDIN,62).     %% Retype pending input.
+-define(OPOST,70).      %% Enable output processing.
+-define(OLCUC,71).      %% Convert lowercase to uppercase.
+-define(ONLCR,72).      %% Map NL to CR-NL.
+-define(OCRNL,73).      %% Translate carriage return to newline (output).
+-define(ONOCR,74).      %% Translate newline to carriage return-newline
+                        %% (output).
+-define(ONLRET,75).     %% Newline performs a carriage return (output).
+-define(CS7,90).        %% 7 bit mode.
+-define(CS8,91).        %% 8 bit mode.
+-define(PARENB,92).     %% Parity enable.
+-define(PARODD,93).     %% Odd parity, else even.
+
+%%  Specifies the input baud rate in bits per second.
+-define(TTY_OP_ISPEED,128).
+%%  Specifies the output baud rate in bits per second.
+-define(TTY_OP_OSPEED,129).  
+
+-record(channel,
+	{
+	  type,          %% "session", "x11", "forwarded-tcpip", "direct-tcpip"
+	  sys,           %% "none", "shell", "exec" "subsystem"
+	  user,          %% "user" process id (default to cm user)
+	  flow_control, 
+
+	  local_id,           %% local channel id
+
+	  recv_window_size,
+	  recv_packet_size,
+	  recv_close = false,
+
+	  remote_id,          %% remote channel id
+	  send_window_size,
+	  send_packet_size,
+	  sent_close = false,
+	  send_buf = []
+	 }).
+
+-record(connection, {
+	  requests = [], %% [{ChannelId, Pid}...] awaiting reply on request,
+	  channel_cache,
+	  channel_pids = [],
+	  port_bindings,
+	  channel_id_seed,
+	  cli_spec,
+	  address, 
+	  port,
+	  options,
+	  exec
+	 }).