OTP-8695 New ssl default

Ssl has now switched default implementation and removed deprecated
certificate handling. All certificate handling is done by the public_key
application.

1 files changed, 709 insertions, 0 deletions

diff --git a/lib/ssl/doc/src/old_ssl.xml b/lib/ssl/doc/src/old_ssl.xml
new file mode 100644
index 0000000000..884e8f67b7
--- /dev/null
+++ b/lib/ssl/doc/src/old_ssl.xml
@@ -0,0 +1,709 @@
+<?xml version="1.0" encoding="latin1" ?>
+<!DOCTYPE erlref SYSTEM "erlref.dtd">
+
+<erlref>
+  <header>
+    <copyright>
+      <year>1999</year><year>2010</year>
+      <holder>Ericsson AB. All Rights Reserved.</holder>
+    </copyright>
+    <legalnotice>
+      The contents of this file are subject to the Erlang Public License,
+      Version 1.1, (the "License"); you may not use this file except in
+      compliance with the License. You should have received a copy of the
+      Erlang Public License along with this software. If not, it can be
+      retrieved online at http://www.erlang.org/.
+
+      Software distributed under the License is distributed on an "AS IS"
+      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+      the License for the specific language governing rights and limitations
+      under the License.
+
+    </legalnotice>
+
+    <title>ssl</title>
+    <prepared>Peter H&ouml;gfeldt</prepared>
+    <responsible>Peter H&ouml;gfeldt</responsible>
+    <docno></docno>
+    <approved>Peter H&ouml;gfeldt</approved>
+    <checked></checked>
+    <date>2003-03-25</date>
+    <rev>D</rev>
+    <file>old_ssl.xml</file>
+  </header>
+  <module>old_ssl</module>
+  <modulesummary>Interface Functions for Secure Socket Layer</modulesummary>
+  <description>
+    <p>This module contains interface functions to the Secure Socket Layer.</p>
+  </description>
+
+  <section>
+    <title>General</title>
+
+    <p>This manual page describes functions that are defined
+      in the ssl module and represents the old ssl implementation
+      that coexists with the new one until it has been
+      totally phased out. </p>
+
+   <p>The new implementation can be
+      accessed by providing the option {ssl_imp, old} to the
+      ssl:connect and ssl:listen functions.</p>
+      
+    <p>The reader is advised to also read the <c>ssl(6)</c> manual page
+      describing the SSL application.
+      </p>
+    <warning>
+      <p>It is strongly advised to seed the random generator after
+        the ssl application has been started (see <c>seed/1</c>
+        below), and before any connections are established. Although
+        the port program interfacing to the ssl libraries does a
+        "random" seeding of its own in order to make everything work
+        properly, that seeding is by no means random for the world
+        since it has a constant value which is known to everyone
+        reading the source code of the port program.</p>
+    </warning>
+  </section>
+
+  <section>
+    <title>Common data types</title>
+    <p>The following datatypes are used in the functions below:
+      </p>
+    <list type="bulleted">
+      <item>
+        <p><c>options() = [option()]</c></p>
+      </item>
+      <item>
+        <p><c>option() = socketoption() | ssloption()</c></p>
+      </item>
+      <item>
+        <p><c>socketoption() = {mode, list} | {mode, binary} |  binary | {packet, packettype()} | {header, integer()} | {nodelay, boolean()} | {active, activetype()} |  {backlog, integer()} | {ip, ipaddress()} | {port, integer()}</c></p>
+      </item>
+      <item>
+        <p><c>ssloption() = {verify, code()} | {depth, depth()} |  {certfile, path()} | {keyfile, path()} | {password, string()} | {cacertfile, path()} | {ciphers, string()}</c></p>
+      </item>
+      <item>
+        <p><c>packettype()</c>  (see inet(3))</p>
+      </item>
+      <item>
+        <p><c>activetype()</c>  (see inet(3))</p>
+      </item>
+      <item>
+        <p><c>reason() = atom() | {atom(), string()}</c></p>
+      </item>
+      <item>
+        <p><c>bytes() = [byte()]</c></p>
+      </item>
+      <item>
+        <p><c>string() = [byte()]</c></p>
+      </item>
+      <item>
+        <p><c>byte() = 0 | 1 | 2 | ... | 255</c></p>
+      </item>
+      <item>
+        <p><c>code() = 0 | 1 | 2</c></p>
+      </item>
+      <item>
+        <p><c>depth() = byte()</c></p>
+      </item>
+      <item>
+        <p><c>address() = hostname() | ipstring() | ipaddress()</c></p>
+      </item>
+      <item>
+        <p><c>ipaddress() = ipstring() | iptuple()</c></p>
+      </item>
+      <item>
+        <p><c>hostname() = string()</c></p>
+      </item>
+      <item>
+        <p><c>ipstring() = string()</c></p>
+      </item>
+      <item>
+        <p><c>iptuple() = {byte(), byte(), byte(), byte()}</c></p>
+      </item>
+      <item>
+        <p><c>sslsocket()</c></p>
+      </item>
+      <item>
+        <p><c>protocol() = sslv2 | sslv3 | tlsv1</c></p>
+      </item>
+      <item>
+        <p><c></c></p>
+      </item>
+    </list>
+    <p>The socket option <c>{backlog, integer()}</c> is for
+      <c>listen/2</c> only, and the option <c>{port, integer()}</c>
+      is for <c>connect/3/4</c> only. 
+      </p>
+    <p>The following socket options are set by default: <c>{mode, list}</c>, <c>{packet, 0}</c>, <c>{header, 0}</c>, <c>{nodelay, false}</c>, <c>{active, true}</c>, <c>{backlog, 5}</c>,
+      <c>{ip, {0,0,0,0}}</c>, and <c>{port, 0}</c>.
+      </p>
+    <p>Note that the options <c>{mode, binary}</c> and <c>binary</c>
+      are equivalent. Similarly <c>{mode, list}</c> and the absence of
+      option <c>binary</c> are equivalent. 
+      </p>
+    <p>The ssl options are for setting specific SSL parameters as follows:
+      </p>
+    <list type="bulleted">
+      <item>
+        <p><c>{verify, code()}</c> Specifies type of verification:
+          0 = do not verify peer; 1 = verify peer, 2 = verify peer,
+          fail if no peer certificate.  The default value is 0.
+          </p>
+      </item>
+      <item>
+        <p><c>{depth, depth()}</c> Specifies the maximum
+          verification depth, i.e. how far in a chain of certificates
+          the verification process can proceed before the verification
+          is considered to fail. 
+          </p>
+        <p>Peer certificate = 0, CA certificate = 1, higher level CA
+          certificate = 2, etc.  The value 2 thus means that a chain
+          can at most contain peer cert, CA cert, next CA cert, and an
+          additional CA cert.
+          </p>
+        <p>The default value is 1.
+          </p>
+      </item>
+      <item>
+        <p><c>{certfile, path()}</c> Path to a file containing the
+          user's certificate.
+          chain of PEM encoded certificates.</p>
+      </item>
+      <item>
+        <p><c>{keyfile, path()}</c> Path to file containing user's
+          private PEM encoded key.</p>
+      </item>
+      <item>
+        <p><c>{password, string()}</c> String containing the user's
+          password. Only used if the private keyfile is password protected.</p>
+      </item>
+      <item>
+        <p><c>{cacertfile, path()}</c> Path to file containing PEM encoded
+          CA certificates (trusted certificates used for verifying a peer
+          certificate).</p>
+      </item>
+      <item>
+        <p><c>{ciphers, string()}</c> String of ciphers as a colon
+          separated list of ciphers. The function <c>ciphers/0</c> can
+          be used to find all available ciphers.</p>
+      </item>
+    </list>
+    <p>The type <c>sslsocket()</c> is opaque to the user.
+      </p>
+    <p>The owner of a socket is the one that created it by a call to
+      <c>transport_accept/[1,2]</c>,  <c>connect/[3,4]</c>,
+      or <c>listen/2</c>.
+      </p>
+    <p>When a socket is in active mode (the default), data from the
+      socket is delivered to the owner of the socket in the form of
+      messages:
+      </p>
+    <list type="bulleted">
+      <item>
+        <p><c>{ssl, Socket, Data}</c></p>
+      </item>
+      <item>
+        <p><c>{ssl_closed, Socket}</c></p>
+      </item>
+      <item>
+        <p><c>{ssl_error, Socket, Reason}</c></p>
+      </item>
+    </list>
+    <p>A <c>Timeout</c> argument specifies a timeout in milliseconds. The 
+      default value for a <c>Timeout</c> argument is <c>infinity</c>.
+      </p>
+    <p>Functions listed below may return the value <c>{error, closed}</c>, which only indicates that the SSL socket is
+      considered closed for the operation in question. It is for
+      instance possible to have <c>{error, closed}</c> returned from
+      an call to <c>send/2</c>, and a subsequent call to <c>recv/3</c>
+      returning <c>{ok, Data}</c>.
+      </p>
+    <p>Hence a return value of <c>{error, closed}</c> must not be
+      interpreted as if the socket was completely closed. On the
+      contrary, in order to free all resources occupied by an SSL
+      socket, <c>close/1</c> must be called, or else the process owning
+      the socket has to terminate.
+      </p>
+    <p>For each SSL socket there is an Erlang process representing the
+      socket.  When a socket is opened, that process links to the
+      calling client process.  Implementations that want to detect
+      abnormal exits from the socket process by receiving <c>{'EXIT', Pid, Reason}</c> messages, should use the function <c>pid/1</c>
+      to retrieve the process identifier from the socket, in order to
+      be able to match exit messages properly.</p>
+  </section>
+  <funcs>
+    <func>
+      <name>ciphers() -> {ok, string()} | {error, enotstarted}</name>
+      <fsummary>Get supported ciphers.</fsummary>
+      <desc>
+        <p>Returns a string consisting of colon separated cipher
+          designations that are supported by the current SSL library
+          implementation.
+          </p>
+        <p>The SSL application has to be started to return the string
+          of ciphers.</p>
+      </desc>
+    </func>
+    <func>
+      <name>close(Socket) -> ok | {error, Reason}</name>
+      <fsummary>Close a socket returned by <c>transport_accept/[1,2]</c>, <c>connect/3/4</c>, or <c>listen/2</c>.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+      </type>
+      <desc>
+	<p>Closes a socket returned by <c>transport_accept/[1,2]</c>,
+	<c>connect/[3,4]</c>, or <c>listen/2</c></p>
+      </desc>
+    </func>
+    <func>
+      <name>connect(Address, Port, Options) -> {ok, Socket} | {error, Reason}</name>
+      <name>connect(Address, Port, Options, Timeout) -> {ok, Socket} | {error, Reason}</name>
+      <fsummary>Connect to <c>Port</c>at <c>Address</c>.</fsummary>
+      <type>
+        <v>Address = address()</v>
+        <v>Port = integer()</v>
+        <v>Options = [connect_option()]</v>
+        <v>connect_option() = {mode, list} | {mode, binary} | binary | {packet, packettype()} | {header, integer()} | {nodelay, boolean()} | {active, activetype()} | {ip, ipaddress()} | {port, integer()} | {verify, code()} | {depth, depth()} | {certfile, path()} | {keyfile, path()} | {password, string()} | {cacertfile, path()} | {ciphers, string()}</v>
+        <v>Timeout = integer()</v>
+        <v>Socket = sslsocket()</v>
+      </type>
+      <desc>
+        <p>Connects to <c>Port</c> at <c>Address</c>. If the optional 
+          <c>Timeout</c> argument is specified, and a connection could not
+          be established within the given time, <c>{error, timeout}</c> is
+          returned. The default value for <c>Timeout</c> is <c>infinity</c>.
+          </p>
+        <p>The <c>ip</c> and <c>port</c> options are for binding to a 
+          particular <em>local</em> address and port, respectively.</p>
+      </desc>
+    </func>
+    <func>
+      <name>connection_info(Socket) -> {ok, {Protocol, Cipher}} | {error, Reason}</name>
+      <fsummary>Get current protocol version and cipher.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Protocol = protocol()</v>
+        <v>Cipher = string()</v>
+      </type>
+      <desc>
+        <p>Gets the chosen protocol version and cipher for an established
+          connection (accepted och connected). </p>
+      </desc>
+    </func>
+    <func>
+      <name>controlling_process(Socket, NewOwner) -> ok | {error, Reason}</name>
+      <fsummary>Assign a new controlling process to the socket.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>NewOwner = pid()</v>
+      </type>
+      <desc>
+        <p>Assigns a new controlling process to <c>Socket</c>. A controlling
+          process is the owner of a socket, and receives all messages from
+          the socket.</p>
+      </desc>
+    </func>
+    <func>
+      <name>format_error(ErrorCode) -> string()</name>
+      <fsummary>Return an error string.</fsummary>
+      <type>
+        <v>ErrorCode = term()</v>
+      </type>
+      <desc>
+        <p>Returns a diagnostic string describing an error.</p>
+      </desc>
+    </func>
+    <func>
+      <name>getopts(Socket, OptionsTags) -> {ok, Options} | {error, Reason}</name>
+      <fsummary>Get options set for socket</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>OptionTags = [optiontag()]()</v>
+      </type>
+      <desc>
+        <p>Returns the options the tags of which are <c>OptionTags</c> for
+          for the socket <c>Socket</c>. </p>
+      </desc>
+    </func>
+    <func>
+      <name>listen(Port, Options) -> {ok, ListenSocket} | {error, Reason}</name>
+      <fsummary>Set up a socket to listen on a port on the local host.</fsummary>
+      <type>
+        <v>Port = integer()</v>
+        <v>Options = [listen_option()]</v>
+        <v>listen_option() = {mode, list} | {mode, binary} | binary | {packet, packettype()} | {header, integer()} | {active, activetype()} | {backlog, integer()} | {ip, ipaddress()} | {verify, code()} | {depth, depth()} | {certfile, path()} | {keyfile, path()} | {password, string()} | {cacertfile, path()} | {ciphers, string()}</v>
+        <v>ListenSocket = sslsocket()</v>
+      </type>
+      <desc>
+        <p>Sets up a socket to listen on port <c>Port</c> at the local host.
+          If <c>Port</c> is zero, <c>listen/2</c> picks an available port
+          number (use <c>port/1</c> to retrieve it).
+          </p>
+        <p>The listen queue size defaults to 5. If a different value is 
+          wanted, the option <c>{backlog, Size}</c> should be added to the 
+          list of options.
+          </p>
+        <p>An empty <c>Options</c> list is considered an error, and
+          <c>{error, enooptions}</c> is returned.
+          </p>
+        <p>The returned <c>ListenSocket</c> can only be used in calls to 
+          <c>transport_accept/[1,2]</c>.</p>
+      </desc>
+    </func>
+    <func>
+      <name>peercert(Socket) -> {ok, Cert} |  {error, Reason}</name>
+      <fsummary>Return the peer certificate.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Cert = binary()()</v>
+        <v>Subject = term()()</v>
+      </type>
+      <desc>
+	<p>Returns the DER encoded peer certificate, the certificate can be decoded with
+	  <c>public_key:pkix_decode_cert/2</c>.
+	</p>
+      </desc>
+    </func>
+    <func>
+      <name>peername(Socket) -> {ok, {Address, Port}} | {error, Reason}</name>
+      <fsummary>Return peer address and port.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Address = ipaddress()</v>
+        <v>Port = integer()</v>
+      </type>
+      <desc>
+        <p>Returns the address and port number of the peer.</p>
+      </desc>
+    </func>
+    <func>
+      <name>pid(Socket) -> pid()</name>
+      <fsummary>Return the pid of the socket process.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+      </type>
+      <desc>
+        <p>Returns the pid of the socket process. The returned pid should
+          only be used for receiving exit messages.</p>
+      </desc>
+    </func>
+    <func>
+      <name>recv(Socket, Length) -> {ok, Data} | {error, Reason}</name>
+      <name>recv(Socket, Length, Timeout) -> {ok, Data} | {error, Reason}</name>
+      <fsummary>Receive data on socket.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Length = integer() >= 0</v>
+        <v>Timeout = integer()</v>
+        <v>Data = bytes() | binary()</v>
+      </type>
+      <desc>
+        <p>Receives data on socket <c>Socket</c> when the socket is in
+          passive mode, i.e. when the option <c>{active, false}</c>
+          has been specified.
+          </p>
+        <p>A notable return value is <c>{error, closed}</c> which
+          indicates that the socket is closed.
+          </p>
+        <p>A positive value of the <c>Length</c> argument is only
+          valid when the socket is in raw mode (option <c>{packet, 0}</c> is set, and the option <c>binary</c> is <em>not</em>
+          set); otherwise it should be set to 0, whence all available
+          bytes are returned.
+          </p>
+        <p>If the optional <c>Timeout</c> parameter is specified, and
+          no data was available within the given time, <c>{error, timeout}</c> is returned. The default value for
+          <c>Timeout</c> is <c>infinity</c>.</p>
+      </desc>
+    </func>
+    <func>
+      <name>seed(Data) -> ok | {error, Reason}</name>
+      <fsummary>Seed the ssl random generator.</fsummary>
+      <type>
+        <v>Data = iolist() | binary()</v>
+      </type>
+      <desc>
+        <p>Seeds the ssl random generator.
+          </p>
+        <p>It is strongly advised to seed the random generator after
+          the ssl application has been started, and before any
+          connections are established. Although the port program
+          interfacing to the OpenSSL libraries does a "random" seeding
+          of its own in order to make everything work properly, that
+          seeding is by no means random for the world since it has a 
+          constant value which is known to everyone reading the source
+          code of the seeding. 
+          </p>
+        <p>A notable return value is <c>{error, edata}}</c> indicating that
+          <c>Data</c> was not a binary nor an iolist.</p>
+      </desc>
+    </func>
+    <func>
+      <name>send(Socket, Data) -> ok | {error, Reason}</name>
+      <fsummary>Write data to a socket.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Data = iolist() | binary()</v>
+      </type>
+      <desc>
+        <p>Writes <c>Data</c> to <c>Socket</c>. </p>
+        <p>A notable return value is <c>{error, closed}</c> indicating that
+          the socket is closed.</p>
+      </desc>
+    </func>
+    <func>
+      <name>setopts(Socket, Options) -> ok | {error, Reason}</name>
+      <fsummary>Set socket options.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Options = [socketoption]()</v>
+      </type>
+      <desc>
+        <p>Sets options according to <c>Options</c> for the socket 
+          <c>Socket</c>. </p>
+      </desc>
+    </func>
+    <func>
+      <name>ssl_accept(Socket) -> ok | {error, Reason}</name>
+      <name>ssl_accept(Socket, Timeout) -> ok | {error, Reason}</name>
+      <fsummary>Perform server-side SSL handshake and key exchange</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Timeout = integer()</v>
+        <v>Reason = atom()</v>
+      </type>
+      <desc>
+        <p>The <c>ssl_accept</c> function establish the SSL connection
+          on the server side. It should be called directly after
+          <c>transport_accept</c>, in the spawned server-loop.</p>
+        <p>Note that the ssl connection is not complete until <c>ssl_accept</c>
+          has returned <c>true</c>, and if an error is returned, the socket
+          is unavailable and for instance <c>close/1</c> will crash.</p>
+      </desc>
+    </func>
+    <func>
+      <name>sockname(Socket) -> {ok, {Address, Port}} | {error, Reason}</name>
+      <fsummary>Return the local address and port.</fsummary>
+      <type>
+        <v>Socket = sslsocket()</v>
+        <v>Address = ipaddress()</v>
+        <v>Port = integer()</v>
+      </type>
+      <desc>
+        <p>Returns the local address and port number of the socket
+          <c>Socket</c>.</p>
+      </desc>
+    </func>
+    <func>
+      <name>transport_accept(Socket) -> {ok, NewSocket} | {error, Reason}</name>
+      <name>transport_accept(Socket, Timeout) -> {ok, NewSocket} | {error, Reason}</name>
+      <fsummary>Accept an incoming connection and prepare for <c>ssl_accept</c></fsummary>
+      <type>
+        <v>Socket = NewSocket = sslsocket()</v>
+        <v>Timeout = integer()</v>
+        <v>Reason = atom()</v>
+      </type>
+      <desc>
+        <p>Accepts an incoming connection request on a listen socket.
+          <c>ListenSocket</c> must be a socket returned from <c>listen/2</c>.
+          The socket returned should be passed to <c>ssl_accept</c> to
+          complete ssl handshaking and establishing the connection.</p>
+        <warning>
+          <p>The socket returned can only be used with <c>ssl_accept</c>,
+            no traffic can be sent or received before that call.</p>
+        </warning>
+        <p>The accepted socket inherits the options set for <c>ListenSocket</c>
+          in <c>listen/2</c>.</p>
+        <p>The default value for <c>Timeout</c> is <c>infinity</c>. If 
+          <c>Timeout</c> is specified, and no connection is accepted within
+          the given time, <c>{error, timeout}</c> is returned.</p>
+      </desc>
+    </func>
+    <func>
+      <name>version() -> {ok, {SSLVsn, CompVsn, LibVsn}}</name>
+      <fsummary>Return the version of SSL.</fsummary>
+      <type>
+        <v>SSLVsn = CompVsn = LibVsn = string()()</v>
+      </type>
+      <desc>
+        <p>Returns the SSL application version (<c>SSLVsn</c>), the library
+          version used when compiling the SSL application port program
+          (<c>CompVsn</c>), and the actual library version used when
+          dynamically linking in runtime (<c>LibVsn</c>).
+          </p>
+        <p>If the SSL application has not been started, <c>CompVsn</c> and
+          <c>LibVsn</c> are empty strings.
+          </p>
+      </desc>
+    </func>
+  </funcs>
+
+  <section>
+    <title>ERRORS</title>
+    <p>The possible error reasons and the corresponding diagnostic strings 
+      returned by <c>format_error/1</c> are either the same as those defined
+      in the <c>inet(3)</c> reference manual, or as follows:
+      </p>
+    <taglist>
+      <tag><c>closed</c></tag>
+      <item>
+        <p>Connection closed for the operation in question.
+          </p>
+      </item>
+      <tag><c>ebadsocket</c></tag>
+      <item>
+        <p>Connection not found (internal error).
+          </p>
+      </item>
+      <tag><c>ebadstate</c></tag>
+      <item>
+        <p>Connection not in connect state (internal error).
+          </p>
+      </item>
+      <tag><c>ebrokertype</c></tag>
+      <item>
+        <p>Wrong broker type (internal error).
+          </p>
+      </item>
+      <tag><c>ecacertfile</c></tag>
+      <item>
+        <p>Own CA certificate file is invalid.
+          </p>
+      </item>
+      <tag><c>ecertfile</c></tag>
+      <item>
+        <p>Own certificate file is invalid.
+          </p>
+      </item>
+      <tag><c>echaintoolong</c></tag>
+      <item>
+        <p>The chain of certificates provided by peer is too long.
+          </p>
+      </item>
+      <tag><c>ecipher</c></tag>
+      <item>
+        <p>Own list of specified ciphers is invalid.
+          </p>
+      </item>
+      <tag><c>ekeyfile</c></tag>
+      <item>
+        <p>Own private key file is invalid.
+          </p>
+      </item>
+      <tag><c>ekeymismatch</c></tag>
+      <item>
+        <p>Own private key does not match own certificate.
+          </p>
+      </item>
+      <tag><c>enoissuercert</c></tag>
+      <item>
+        <p>Cannot find certificate of issuer of certificate provided
+          by peer.
+          </p>
+      </item>
+      <tag><c>enoservercert</c></tag>
+      <item>
+        <p>Attempt to do accept without having set own certificate.
+          </p>
+      </item>
+      <tag><c>enotlistener</c></tag>
+      <item>
+        <p>Attempt to accept on a non-listening socket.
+          </p>
+      </item>
+      <tag><c>enoproxysocket</c></tag>
+      <item>
+        <p>No proxy socket found (internal error).
+          </p>
+      </item>
+      <tag><c>enooptions</c></tag>
+      <item>
+        <p>The list of options is empty.
+          </p>
+      </item>
+      <tag><c>enotstarted</c></tag>
+      <item>
+        <p>The SSL application has not been started.
+          </p>
+      </item>
+      <tag><c>eoptions</c></tag>
+      <item>
+        <p>Invalid list of options.
+          </p>
+      </item>
+      <tag><c>epeercert</c></tag>
+      <item>
+        <p>Certificate provided by peer is in error.
+          </p>
+      </item>
+      <tag><c>epeercertexpired</c></tag>
+      <item>
+        <p>Certificate provided by peer has expired.
+          </p>
+      </item>
+      <tag><c>epeercertinvalid</c></tag>
+      <item>
+        <p>Certificate provided by peer is invalid.
+          </p>
+      </item>
+      <tag><c>eselfsignedcert</c></tag>
+      <item>
+        <p>Certificate provided by peer is self signed.
+          </p>
+      </item>
+      <tag><c>esslaccept</c></tag>
+      <item>
+        <p>Server SSL handshake procedure between client and server failed.
+          </p>
+      </item>
+      <tag><c>esslconnect</c></tag>
+      <item>
+        <p>Client SSL handshake procedure between client and server failed.
+          </p>
+      </item>
+      <tag><c>esslerrssl</c></tag>
+      <item>
+        <p>SSL protocol failure. Typically because of a fatal alert 
+          from peer.
+          </p>
+      </item>
+      <tag><c>ewantconnect</c></tag>
+      <item>
+        <p>Protocol wants to connect, which is not supported in
+          this version of the SSL application.
+          </p>
+      </item>
+      <tag><c>ex509lookup</c></tag>
+      <item>
+        <p>Protocol wants X.509 lookup, which is not supported in
+          this version of the SSL application.
+          </p>
+      </item>
+      <tag><c>{badcall, Call}</c></tag>
+      <item>
+        <p>Call not recognized for current mode (active or passive) and
+          state of socket.
+          </p>
+      </item>
+      <tag><c>{badcast, Cast}</c></tag>
+      <item>
+        <p>Call not recognized for current mode (active or passive) and
+          state of socket. 
+          </p>
+      </item>
+      <tag><c>{badinfo, Info}</c></tag>
+      <item>
+        <p>Call not recognized for current mode (active or passive) and
+          state of socket.
+          </p>
+      </item>
+    </taglist>
+  </section>
+
+  <section>
+    <title>SEE ALSO</title>
+    <p>gen_tcp(3), inet(3) public_key(3) </p>
+  </section>
+  
+</erlref>
+
+